diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 237 |
1 files changed, 135 insertions, 102 deletions
@@ -1,93 +1,100 @@ ############################################################################ # -# fptools/Makefile +# This is the top-level Makefile for GHC # -# This is the main Makefile for fptools. +# Targets: +# +# bootsrap (DEFAULT) +# Builds GHC, then builds the libraries, +# then uses this GHC ("stage 1") to build itself +# ("stage 2"). +# +# bootstrap2 +# Same as bootstrap +# +# bootstrap3 +# bootstrap2 + we build GHC one more time ("stage 3") +# +# stage1 +# Just build up to stage 1 +# +# stage2 +# Just build stage 2 (stage 1 must be built) +# +# stage3 +# Just build stage 3 (stage 2 must be built) +# +# all +# Same as bootstrap +# +# install +# Install everything, including stage 2 compiler by default +# (override with stage=3, for example). +# +# dist +# Make a source dist (WARNING: runs 'make distclean' first) +# +# binary-dist +# Builds a binary distribution +# +# hc-file-bundle +# Builds an HC-file bundle, for bootstrapping +# +# clean, distclean, maintainer-clean +# Increasing levels of cleanliness # ############################################################################ TOP=. include $(TOP)/mk/boilerplate.mk -# find the projects that actually exist... -ProjectsThatExist = $(filter $(patsubst %/, %, $(wildcard */)), $(AllProjects)) - -# and filter only those that the user requested, if necessary -ifeq "$(ProjectsToBuild)" "" -SUBDIRS = $(ProjectsThatExist) -else -SUBDIRS = $(filter $(ProjectsToBuild), $(ProjectsThatExist)) -endif - -ifneq "$(Project)" "" - ifeq "$(Project)" "GreenCard" - ProjectDirectory=greencard - else - ifeq "$(Project)" "HaskellDirect" - ProjectDirectory=hdirect - else - ProjectDirectory=$(Project) - endif - endif - -include $(shell echo $(ProjectDirectory) | tr A-Z a-z)/mk/config.mk - -include $(shell echo $(ProjectDirectory) | tr A-Z a-z)/mk/version.mk -endif - -# ----------------------------------------------------------------------------- -# Certain targets require that Project is set from the command line. - -CURRENT_TARGET = $(MAKECMDGOALS) -project-check : - @if [ "$(Project)" = "" ]; then \ - echo " You need to set \"Project\" in order to make $(CURRENT_TARGET)"; \ - echo " eg. make $(CURRENT_TARGET) Project=Ghc"; \ - exit 1; \ - fi - -# ----------------------------------------------------------------------------- -# Targets: all, stage1, stage2, stage3 - -DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h - -extraclean:: - $(RM) -rf autom4te.cache - # -# If you've ended up using an in-place version of Happy, -# make sure it gets built early on. +# Order is important! It's e.g. necessary to descend into include/ +# before the rest to have a config.h, etc. # -ifeq "$(HAPPY)" "$(FPTOOLS_TOP_ABS)/happy/src/happy-inplace" -build :: $(FPTOOLS_TOP_ABS)/happy/src/happy-inplace +# If we're booting from .hc files, swap the order +# we descend into subdirs - to boot utils must be before driver. +# +.PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3 -$(FPTOOLS_TOP_ABS)/happy/src/happy-inplace : glafp-utils - $(MAKE) -C happy boot all +# We can't 'make boot' in libraries until stage1 is built +ifeq "$(BootingFromHc)" "YES" +SUBDIRS_NOLIB = includes rts docs compiler compat utils driver +else +SUBDIRS_NOLIB = includes compat utils driver docs compiler rts endif -# Build all projects that we know about -build :: +SUBDIRS = $(SUBDIRS_NOLIB) libraries + +stage1 : + $(MAKE) -C utils/mkdependC boot @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(SUBDIRS); do \ - if [ -d $$i ]; then \ - $(MAKE) -C $$i boot; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - $(MAKE) -C $$i all; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - fi; \ + for i in $(SUBDIRS_NOLIB); do \ + echo "------------------------------------------------------------------------"; \ + echo "== $(MAKE) boot $(MFLAGS);"; \ + echo " in $(shell pwd)/$$i"; \ + echo "------------------------------------------------------------------------"; \ + $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \ + if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ + done; \ + for i in $(SUBDIRS_NOLIB); do \ + echo "------------------------------------------------------------------------"; \ + echo "== $(MAKE) all $(MFLAGS);"; \ + echo " in $(shell pwd)/$$i"; \ + echo "------------------------------------------------------------------------"; \ + $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \ + if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ done - -ifeq "$(findstring ghc, $(SUBDIRS))" "ghc" - -.PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3 - -stage1 : build + @$(MAKE) -C libraries boot + @$(MAKE) -C libraries all stage2 : - $(MAKE) -C ghc/compiler boot stage=2 - $(MAKE) -C ghc/compiler stage=2 + $(MAKE) -C compiler boot stage=2 + $(MAKE) -C compiler stage=2 stage3 : - $(MAKE) -C ghc/compiler boot stage=3 - $(MAKE) -C ghc/compiler stage=3 + $(MAKE) -C compiler boot stage=3 + $(MAKE) -C compiler stage=3 bootstrap : bootstrap2 @@ -99,6 +106,9 @@ bootstrap3 : bootstrap2 all :: bootstrap +# ----------------------------------------------------------------------------- +# Installing + # We want to install the stage 2 bootstrapped compiler by default, but we let # the user override this by saying 'make install stage=1', for example. ifeq "$(stage)" "" @@ -107,27 +117,25 @@ else INSTALL_STAGE = endif -else # Not building GHC - -all :: build - -INSTALL_STAGE = - -endif - -boot :: - @echo "Please use \`make all' only from the top-level, or \`make boot' followed" - @echo "by \`make all' in an individual project subdirectory (ghc, hslibs etc.)." - +# Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too install :: @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(filter-out $(ProjectsDontInstall), $(SUBDIRS)); do \ - if [ -d $$i ]; then \ - $(MAKE) -C $$i $(INSTALL_STAGE) install; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - fi; \ + for i in $(SUBDIRS); do \ + echo "------------------------------------------------------------------------"; \ + echo "== $(MAKE) $@ $(MFLAGS);"; \ + echo " in $(shell pwd)/$$i"; \ + echo "------------------------------------------------------------------------"; \ + $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \ + if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ done +ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +# These files need to be in the InstallShield +# INSTALL_DATAS rather than INSTALL_DOCS is used so these files go +# in the top-level directory of the distribution +INSTALL_DATAS += ANNOUNCE LICENSE README VERSION +endif + # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs # and the perl interpreter and dll into the GHC prefix directory. # Gcc and Perl source locations derived from configuration data. @@ -152,11 +160,13 @@ endif install-docs :: @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \ - for i in $(filter-out $(ProjectsDontInstall), $(SUBDIRS)); do \ - if [ -d $$i ]; then \ - $(MAKE) -C $$i $(INSTALL_STAGE) install-docs; \ - if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ - fi; \ + for i in $(SUBDIRS); do \ + echo "------------------------------------------------------------------------"; \ + echo "== $(MAKE) $@ $(MFLAGS);"; \ + echo " in $(shell pwd)/$$i"; \ + echo "------------------------------------------------------------------------"; \ + $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \ + if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \ done # ----------------------------------------------------------------------------- @@ -185,7 +195,18 @@ install-docs :: # binary-dist is an FPtools addition for binary distributions # -binary-dist :: project-check +ifneq "$(TARGETPLATFORM)" "i386-unknown-mingw32" +GhcBinDistShScripts = ghc-$(ProjectVersion) ghci-$(ProjectVersion) ghc-pkg-$(ProjectVersion) hsc2hs +else +GhcBinDistShScripts = +endif + +GhcBinDistPrlScripts = ghcprof +GhcBinDistLibPrlScripts = ghc-asm ghc-split +GhcBinDistBins = hp2ps runghc +GhcBinDistOptBins = runhaskell +GhcBinDistLinks = ghc ghci ghc-pkg +GhcBinDistLibSplicedFiles = package.conf BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS) BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion) @@ -391,7 +412,7 @@ binary-dist:: # Do it like this: # # $ make -# $ make dist Project=Ghc +# $ make dist # # WARNING: `make dist' calls `make distclean' before tarring up the tree. # @@ -453,30 +474,42 @@ dist-package-zip :: hc-file-bundle : project-check $(RM) -r $(ProjectNameShort)-$(ProjectVersion) $(LN_S) . $(ProjectNameShort)-$(ProjectVersion) - $(FIND) $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler \ - $(ProjectNameShort)-$(ProjectVersion)/ghc/utils \ - $(ProjectNameShort)-$(ProjectVersion)/ghc/lib \ + $(FIND) $(ProjectNameShort)-$(ProjectVersion)/compiler \ + $(ProjectNameShort)-$(ProjectVersion)/utils \ + $(ProjectNameShort)-$(ProjectVersion)/compat \ $(ProjectNameShort)-$(ProjectVersion)/libraries -follow \ \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go - for f in `$(FIND) $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler $(ProjectNameShort)-$(ProjectVersion)/ghc/utils $(ProjectNameShort)-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \ + for f in `$(FIND) $(ProjectNameShort)-$(ProjectVersion)/compiler $(ProjectNameShort)-$(ProjectVersion)/utils $(ProjectNameShort)-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \ if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \ echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \ fi; \ done; - for f in `$(FIND) $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler $(ProjectNameShort)-$(ProjectVersion)/ghc/rts -name "*.cmm" -follow -print` ""; do \ + for f in `$(FIND) $(ProjectNameShort)-$(ProjectVersion)/compiler $(ProjectNameShort)-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \ if test "x$$f" != "x"; then \ echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \ fi; \ done; echo $(ProjectNameShort)-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/parser/Parser.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/parser/ParserCore.hs >> hc-files-to-go - echo $(ProjectNameShort)-$(ProjectVersion)/ghc/compiler/main/ParsePkgConf.hs >> hc-files-to-go + echo $(ProjectNameShort)-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go + echo $(ProjectNameShort)-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go + echo $(ProjectNameShort)-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go echo $(ProjectNameShort)-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go tar czf $(ProjectNameShort)-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go` +# ----------------------------------------------------------------------------- +# Cleaning + CLEAN_FILES += hc-files-to-go *-hc.tar.gz +DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \ + ghc.spec docs/users_guide/ug-book.xml + +# don't clean config.mk: it's needed when cleaning stuff later on +LATE_DIST_CLEAN_FILES += mk/config.mk + +extraclean:: + $(RM) -rf autom4te.cache + # ----------------------------------------------------------------------------- # Turn off target.mk's rules for 'all', 'boot' and 'install'. |