2003-02-17 Neal H. Walfield <neal@g10code.de>

	* AUTHORS: New file.
	* INSTALL: New file.
	* Makefile.am: New file.
	* NEWS: New file.
	* README: New file.
	* autogen.sh: New file, copied from newpg.
	* configure.ac: New file, imported from newpg.
	* depcomp: New file.
	* install-sh: New file.
	* missing: New file.
	* mkinstalldirs: New file.

	* doc: New directory.
	* src: New directory.
	* tests: New directory.

12 files changed, 1659 insertions, 0 deletions

diff --git a/AUTHORS b/AUTHORS
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/AUTHORS
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 0000000..4fe3669
--- /dev/null
+++ b/ChangeLog
@@ -0,0 +1,21 @@
+2003-02-17  Neal H. Walfield  <neal@g10code.de>
+
+	* AUTHORS: New file.
+	* INSTALL: New file.
+	* Makefile.am: New file.
+	* NEWS: New file.
+	* README: New file.
+	* autogen.sh: New file, copied from newpg.
+	* configure.ac: New file, imported from newpg.
+	* depcomp: New file.
+	* install-sh: New file.
+	* missing: New file.
+	* mkinstalldirs: New file.
+
+	* doc: New directory.
+	* src: New directory.
+	* tests: New directory.
+
+
+
+
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000..a4b3414
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,229 @@
+Copyright 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
+
+   This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..a5cd5a4
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1 @@
+SUBDIRS = src doc tests 
\ No newline at end of file
diff --git a/NEWS b/NEWS
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/NEWS
diff --git a/README b/README
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/README
diff --git a/autogen.sh b/autogen.sh
new file mode 100755
index 0000000..9e377cc
--- /dev/null
+++ b/autogen.sh
@@ -0,0 +1,163 @@
+#!/bin/sh
+# Run this to generate all the initial makefiles, etc.
+# It is only needed for the CVS version.
+
+# have_version(prog, list of executables, required version) 
+#
+# Returns true and sets $prog to the first executable with the
+# required minimum major.minor.
+have_version ()
+{
+  found=0
+
+  for prog in $2 :
+  do
+    ver=$($prog --version \
+  	  | gawk '{ if (match($0, /[0-9]+\.[0-9]+/))
+                      {
+                        print substr($0, RSTART, RLENGTH); ok=1; exit 0;
+                      }
+                  }
+  
+                  END {
+                        if (! ok)
+                          exit 1;
+                      }')
+  
+    if test $? = 0
+    then
+      if expr 0$ver '>=' 0$3 >/dev/null 2>&1
+      then
+        echo Using $prog
+	found=1
+	export $1="$prog"
+	break
+      fi
+    fi
+  done
+
+  if test 0$found = 01
+  then
+    true
+  else
+    echo "*** Error.  Could not find an appropriate executable for $1 with "
+    echo "at least version $3."
+    false
+  fi
+}
+
+PGM=libassuan
+lib_config_files=""
+autoconf_vers=2.52
+automake_vers=1.5
+aclocal_vers=1.5
+#libtool_vers=1.3
+
+DIE=no
+if test "$1" = "--build-w32"; then
+    shift
+    target=i386--mingw32
+    if [ ! -f ./config.guess ]; then
+        echo "./config.guess not found" >&2
+        exit 1
+    fi
+    host=`./config.guess`
+        
+    if ! mingw32 --version >/dev/null; then
+        echo "We need at least version 0.3 of MingW32/CPD" >&2
+        exit 1
+    fi
+
+    if [ -f config.h ]; then
+        if grep HAVE_DOSISH_SYSTEM config.h | grep undef >/dev/null; then
+            echo "Pease run a 'make distclean' first" >&2
+            exit 1
+        fi
+    fi
+
+    crossinstalldir=`mingw32 --install-dir`
+    crossbindir=`mingw32 --get-bindir 2>/dev/null` \
+               || crossbindir="$crossinstalldir/bin"
+    crossdatadir=`mingw32 --get-datadir 2>/dev/null` \
+               || crossdatadir="$crossinstalldir/share"
+    crosslibdir=`mingw32 --get-libdir 2>/dev/null` \
+               || crosslibdir="$crossinstalldir/i386--mingw32/lib"
+    crossincdir=`mingw32 --get-includedir 2>/dev/null` \
+               || crossincdir="$crossinstalldir/i386--mingw32/include"
+    CC=`mingw32 --get-path gcc`
+    CPP=`mingw32 --get-path cpp`
+    AR=`mingw32 --get-path ar`
+    RANLIB=`mingw32 --get-path ranlib`
+    export CC CPP AR RANLIB 
+
+    disable_foo_tests=""
+    if [ -n "$lib_config_files" ]; then
+        for i in $lib_config_files; do
+            j=`echo $i | tr '[a-z-]' '[A-Z_]'`
+            eval "$j=${crossbindir}/$i"
+            export $j
+            disable_foo_tests="$disable_foo_tests --disable-`echo $i| \
+                           sed 's,-config$,,'`-test"
+            if [ ! -f "${crossbindir}/$i" ]; then                   
+                echo "$i not installed for MingW32" >&2
+                DIE=yes
+            fi
+        done
+    fi
+    [ $DIE = yes ] && exit 1
+
+    ./configure --host=${host} --target=${target}  ${disable_foo_tests} \
+                --bindir=${crossbindir} --libdir=${crosslibdir} \
+                --datadir=${crossdatadir} --includedir=${crossincdir} \
+                --enable-maintainer-mode $*
+    exit $?
+fi
+
+if ! have_version autoconf "$autoconf autoconf" $autoconf_vers
+then
+  DIE="yes"
+fi
+
+if have_version automake "$automake automake automake-1.6" $automake_vers
+then
+  if ! have_version aclocal "$aclocal aclocal aclocal-1.6" $aclocal_vers
+  then
+    DIE='yes'
+  fi
+else
+    DIE='yes'
+fi
+
+#if (libtool --version) < /dev/null > /dev/null 2>&1 ; then
+#    if (libtool --version | awk 'NR==1 { if( $4 >= '$libtool_vers') \
+#                               exit 1; exit 0; }');
+#    then
+#       echo "**Error**: "\`libtool\'" is too old."
+#       echo '           (version ' $libtool_vers ' or newer is required)'
+#       DIE="yes"
+#    fi
+#else
+#    echo
+#    echo "**Error**: You must have "\`libtool\'" installed to compile $PGM."
+#    echo '           (version ' $libtool_vers ' or newer is required)'
+#    DIE="yes"
+#fi
+
+if test "$DIE" = "yes"; then
+    exit 1
+fi
+
+#echo "Running libtoolize...  Ignore non-fatal messages."
+#echo "no" | libtoolize
+
+echo "Running gettextize...  Ignore non-fatal messages."
+echo "no" | gettextize 
+
+echo "Running $aclocal"
+$aclocal
+echo "Running autoheader..."
+autoheader
+echo "Running $automake --gnu -a"
+$automake --gnu -a
+echo "Running $autoconf"
+$autoconf
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..f7735c5
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,136 @@
+# configure.ac - for libassuan
+#       Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc,
+# 
+# This file is part of GnuPG.
+# 
+# GnuPG is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# GnuPG is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+# Process this file with autoconf to produce a configure script.
+AC_PREREQ(2.52)
+# Version number: Remember to change it immediately *after* a release.
+#                 Add a "-cvs" prefix for non-released code.
+AC_INIT(libassuan, 0.0.1-cvs, gpa-dev@gnupg.org)
+
+PACKAGE=$PACKAGE_NAME
+VERSION=$PACKAGE_VERSION
+
+AC_CONFIG_SRCDIR(src/assuan.h)
+AM_CONFIG_HEADER(config.h)
+AM_INIT_AUTOMAKE($PACKAGE, $VERSION)
+AM_MAINTAINER_MODE
+
+AH_TOP([
+/* We need this, because some autoconf tests rely on this (e.g. stpcpy)
+   and it should be used for new programs anyway. */
+#define _GNU_SOURCE  1
+])
+
+AH_BOTTOM([
+/* Some global constants. */
+#ifdef HAVE_DRIVE_LETTERS
+#define GNUPG_DEFAULT_HOMEDIR "c:/gnupg"
+#else
+#define GNUPG_DEFAULT_HOMEDIR "~/.gnupg"
+#endif 
+#define GNUPG_PRIVATE_KEYS_DIR "private-keys-v1.d"
+])
+
+
+
+AC_SUBST(PACKAGE)
+AC_SUBST(VERSION)
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of this package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version of this package])
+AC_DEFINE_UNQUOTED(PACKAGE_BUGREPORT, "$PACKAGE_BUGREPORT",
+                                        [Bug report address])
+
+# Checks for programs.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_PROG_AWK
+AC_PROG_CC
+AC_PROG_CPP
+AC_PROG_INSTALL
+AC_PROG_LN_S
+AC_PROG_MAKE_SET
+AC_PROG_RANLIB
+#AC_ARG_PROGRAM
+
+if test "$GCC" = yes; then
+    CFLAGS="$CFLAGS -Wall -Wcast-align -Wshadow -Wstrict-prototypes"
+fi
+
+case "${target}" in
+    *-*-mingw32*)
+        PRINTABLE_OS_NAME="MingW32"
+        AC_DEFINE(HAVE_DOSISH_SYSTEM,1,
+                  [defined if we run on some of the PCDOS like systems 
+                   (DOS, Windoze. OS/2) with special properties like
+                    no file modes])
+        ;;
+    i?86-emx-os2 | i?86-*-os2*emx )
+        PRINTABLE_OS_NAME="OS/2"
+        ;;
+    i?86-*-msdosdjgpp*)
+        PRINTABLE_OS_NAME="MSDOS/DJGPP"
+        try_dynload=no
+        ;;
+    *-linux*)
+        PRINTABLE_OS_NAME="GNU/Linux"
+        ;;
+dnl let that after linux to avoid gnu-linux problems
+    *-gnu*)
+        PRINTABLE_OS_NAME="GNU/Hurd"
+        ;;
+    *)
+        PRINTABLE_OS_NAME=`uname -s || echo "Unknown"`
+        ;;
+esac
+AC_DEFINE_UNQUOTED(PRINTABLE_OS_NAME, "$PRINTABLE_OS_NAME",
+                   [A human readable text with the name of the OS])
+
+
+# Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS([string.h locale.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_C_INLINE
+AC_TYPE_SIZE_T
+AC_TYPE_SIGNAL
+AC_DECL_SYS_SIGLIST
+
+# Checks for library functions.
+
+AC_CHECK_FUNCS(flockfile funlockfile)
+
+AC_REPLACE_FUNCS(fopencookie)
+# FIXME: Print a warning when fopencookie is not available.
+AC_REPLACE_FUNCS(isascii)
+AC_REPLACE_FUNCS(putc_unlocked)
+AC_REPLACE_FUNCS(memrchr)
+
+AC_CONFIG_FILES([
+Makefile
+src/Makefile
+doc/Makefile
+tests/Makefile
+])
+AC_OUTPUT
diff --git a/depcomp b/depcomp
new file mode 100755
index 0000000..807b991
--- /dev/null
+++ b/depcomp
@@ -0,0 +1,423 @@
+#! /bin/sh
+
+# depcomp - compile a program generating dependencies as side-effects
+# Copyright 1999, 2000 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+# `libtool' can also be set to `yes' or `no'.
+
+if test -z "$depfile"; then
+   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
+   dir=`echo "$object" | sed 's,/.*$,/,'`
+   if test "$dir" = "$object"; then
+      dir=
+   fi
+   # FIXME: should be _deps on DOS.
+   depfile="$dir.deps/$base"
+fi
+
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  This file always lives in the current directory.
+  # Also, the AIX compiler puts `$object:' at the start of each line;
+  # $object doesn't have directory information.
+  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  outname="$stripped.o"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      tmpdepfile1="$dir.libs/$base.lo.d"
+      tmpdepfile2="$dir.libs/$base.d"
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1="$dir$base.o.d"
+      tmpdepfile2="$dir$base.d"
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2"
+      exit $stat
+   fi
+
+   if test -f "$tmpdepfile1"; then
+      tmpdepfile="$tmpdepfile1"
+   else
+      tmpdepfile="$tmpdepfile2"
+   fi
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a space and a tab in the [].
+      sed -e 's,^.*\.[a-z]*:[ 	]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.  We will use -o /dev/null later,
+  # however we can't do the remplacement now because
+  # `-o $object' might simply not be used
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    -*)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
diff --git a/install-sh b/install-sh
new file mode 100755
index 0000000..11870f1
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	:
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=$mkdirprog
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f "$src" ] || [ -d "$src" ]
+	then
+		:
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		:
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		:
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+	'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		:
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		:
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0
diff --git a/missing b/missing
new file mode 100755
index 0000000..6a37006
--- /dev/null
+++ b/missing
@@ -0,0 +1,336 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing 0.4 - GNU automake"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+       # We have makeinfo, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  tar)
+    shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequirements for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
diff --git a/mkinstalldirs b/mkinstalldirs
new file mode 100755
index 0000000..8ab885e
--- /dev/null
+++ b/mkinstalldirs
@@ -0,0 +1,99 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+   case "${1}" in
+     -h | --help | --h* )			# -h for help
+	echo "${usage}" 1>&2; exit 0 ;;
+     -m )					# -m PERM arg
+	shift
+	test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
+	dirmode="${1}"
+	shift ;;
+     -- ) shift; break ;;			# stop option processing
+     -* ) echo "${usage}" 1>&2; exit 1 ;;	# unknown option
+     * )  break ;;				# first non-opt arg
+   esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+0) exit 0 ;;
+esac
+
+case $dirmode in
+'')
+  if mkdir -p -- . 2>/dev/null; then
+    echo "mkdir -p -- $*"
+    exec mkdir -p -- "$@"
+  fi ;;
+*)
+  if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+    echo "mkdir -m $dirmode -p -- $*"
+    exec mkdir -m "$dirmode" -p -- "$@"
+  fi ;;
+esac
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+	echo "mkdir $pathcomp"
+
+	mkdir "$pathcomp" || lasterr=$?
+
+	if test ! -d "$pathcomp"; then
+	  errstatus=$lasterr
+	else
+	  if test ! -z "$dirmode"; then
+	     echo "chmod $dirmode $pathcomp"
+
+	     lasterr=""
+	     chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+	     if test ! -z "$lasterr"; then
+	       errstatus=$lasterr
+	     fi
+	  fi
+	fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 3
+# End:
+# mkinstalldirs ends here