* autogen.sh: New.

* Makefile.am (EXTRA_DIST): Added autogen.sh.

* libtool.m4: Added (CVS only).

4 files changed, 3749 insertions, 5453 deletions

diff --git a/autogen.sh b/autogen.sh
index 738a11b..c7e5789 100755
--- a/autogen.sh
+++ b/autogen.sh
@@ -25,70 +25,49 @@ automake_vers=1.7.6
 gettext_vers=0.12.1
 
 
-
 aclocal_vers="$automake_vers"
 ACLOCAL=${ACLOCAL:-aclocal}
 AUTOCONF=${AUTOCONF:-autoconf}
 AUTOMAKE=${AUTOMAKE:-automake}
 AUTOHEADER=${AUTOHEADER:-autoheader}
+GETTEXT=${GETTEXT:-gettext}
 DIE=no
 
+cvtver () {
+    awk 'NR==1 {split($NF,A,".");X=1000000*A[1]+1000*A[2]+A[3];print X;exit 0}'
+}
+
+chkver () {
+    expr `("$1" --version || echo "0") | cvtver` '>=' `echo "$2" | cvtver` \
+           >/dev/null
+}
 
-if ($AUTOCONF --version) < /dev/null > /dev/null 2>&1 ; then
-    if ($AUTOCONF --version | awk 'NR==1 { if( $3 >= "'$autoconf_vers'") \
-			       exit 1; exit 0; }');
-    then
-       echo "**Error**: "\`autoconf\'" is too old."
-       echo '           (version ' $autoconf_vers ' or newer is required)'
+check_version () {
+    if ! chkver $1 $2 ; then
+       echo "**Error**: "\`$1\'" not installed or too old." >&2
+       echo '           (version '$2' or newer is required)' >&2
        DIE="yes"
+       return 1
+    else
+       return 0
     fi
-else
-    echo
-    echo "**Error**: You must have "\`autoconf\'" installed to compile $PGM."
-    echo '           (version ' $autoconf_vers ' or newer is required)'
-    DIE="yes"
-fi
+}
 
-if ($AUTOMAKE --version) < /dev/null > /dev/null 2>&1 ; then
-  if ($AUTOMAKE --version | awk 'NR==1 { if( $4 >= "'$automake_vers'") \
-			     exit 1; exit 0; }');
-     then
-     echo "**Error**: "\`automake\'" is too old."
-     echo '           (version ' $automake_vers ' or newer is required)'
-     DIE="yes"
-  fi
-  if ($ACLOCAL --version) < /dev/null > /dev/null 2>&1; then
-    if ($ACLOCAL --version | awk 'NR==1 { if( $4 >= "'$aclocal_vers'" ) \
-						exit 1; exit 0; }' );
-    then
-      echo "**Error**: "\`aclocal\'" is too old."
-      echo '           (version ' $aclocal_vers ' or newer is required)'
-      DIE="yes"
-    fi
-  else
-    echo
-    echo "**Error**: Missing "\`aclocal\'".  The version of "\`automake\'
-    echo "           installed doesn't appear recent enough."
-    DIE="yes"
-  fi
-else
-    echo
-    echo "**Error**: You must have "\`automake\'" installed to compile $PGM."
-    echo '           (version ' $automake_vers ' or newer is required)'
-    DIE="yes"
-fi
 
-tmp_vers=$(echo "$gettext_vers" | awk '{ split($0,A,"."); \
-             X=10000*A[1]+100*A[2]+A[3]; print X;}')
-if (gettext --version </dev/null 2>/dev/null | awk 'NR==1 { split($4,A,"."); \
-    X=10000*A[1]+100*A[2]+A[3]; if( X >= '$tmp_vers' ) exit 1; exit 0}')
-    then
-    echo "**Error**: You must have "\`gettext\'" installed to compile $PGM."
-    echo '           (version '$gettext_vers' or newer is required)'
-    DIE="yes"
+check_version $AUTOCONF $autoconf_vers
+if check_version $AUTOMAKE $automake_vers ; then
+  check_version $ACLOCAL $aclocal_vers
 fi
+check_version $GETTEXT $gettext_vers
 
 if test "$DIE" = "yes"; then
+    cat <<EOF
+
+Note that you may use alternative versions of the tools by setting 
+the corresponding environment variable to that version; e.g.:
+  AUTOMAKE=automake-1.6 ACLOCAL=aclocal-1.6 ./autogen.sh
+                   
+EOF
     exit 1
 fi
 
diff --git a/libtool b/libtool
deleted file mode 100755
index 004d8f2..0000000
--- a/libtool
+++ /dev/null
@@ -1,5404 +0,0 @@
-#! /bin/sh
-
-# libtool - Provide generalized library-building support services.
-# Generated automatically by  (GNU libgpg-error 0.6)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996-2000 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed that does not truncate output.
-SED="/bin/sed"
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="/bin/sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host vigenere:
-
-# Shell to use when invoking shell scripts.
-SHELL="/bin/sh"
-
-# Whether or not to build shared libraries.
-build_libtool_libs=yes
-
-# Whether or not to build static libraries.
-build_old_libs=yes
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=no
-
-# Whether or not to optimize for fast installation.
-fast_install=yes
-
-# The host system.
-host_alias=
-host=i686-pc-linux-gnu
-
-# An echo program that does not interpret backslashes.
-echo="echo"
-
-# The archiver.
-AR="ar"
-AR_FLAGS="cru"
-
-# The default C compiler.
-CC="gcc-3.3"
-
-# Is the compiler the GNU C compiler?
-with_gcc=yes
-
-# The linker used to build libraries.
-LD="/usr/bin/ld"
-
-# Whether we need hard or soft links.
-LN_S="ln -s"
-
-# A BSD-compatible nm program.
-NM="/usr/bin/nm -B"
-
-# A symbol stripping program
-STRIP="strip"
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=file
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="dlltool"
-
-# Used on cygwin: object dumper.
-OBJDUMP="objdump"
-
-# Used on cygwin: assembler.
-AS="as"
-
-# The name of the directory that contains temporary libtool files.
-objdir=.libs
-
-# How to create reloadable object files.
-reload_flag=" -r"
-reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
-
-# How to pass a linker flag through the compiler.
-wl="-Wl,"
-
-# Object file suffix (normally "o").
-objext="o"
-
-# Old archive suffix (normally "a").
-libext="a"
-
-# Executable file suffix (normally "").
-exeext=""
-
-# Additional compiler flags for building library objects.
-pic_flag="  -fPIC"
-pic_mode=default
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o="yes"
-
-# Can we write directly to a .lo ?
-compiler_o_lo="yes"
-
-# Must we lock files when doing compilation ?
-need_locks="no"
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=no
-
-# Do we need a version for libraries?
-need_version=no
-
-# Whether dlopen is supported.
-dlopen_support=unknown
-
-# Whether dlopen of programs is supported.
-dlopen_self=unknown
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=unknown
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag="-static"
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=" -fno-builtin -fno-rtti -fno-exceptions"
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec="\${wl}--export-dynamic"
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=""
-
-# Library versioning type.
-version_type=linux
-
-# Format of library name prefix.
-libname_spec="lib\$name"
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so"
-
-# The coded name of the library, if different from the real name.
-soname_spec="\${libname}\${release}.so\$major"
-
-# Commands used to build and install an old-style archive.
-RANLIB="ranlib"
-old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib"
-old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib"
-old_postuninstall_cmds=""
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=""
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=""
-
-# Commands used to build and install a shared archive.
-archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib"
-archive_expsym_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib"
-postinstall_cmds=""
-postuninstall_cmds=""
-
-# Commands to strip libraries.
-old_striplib="strip --strip-debug"
-striplib="strip --strip-unneeded"
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method="pass_all"
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd="\$MAGIC_CMD"
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=""
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=""
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=""
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe="sed -n -e 's/^.*[ 	]\\([ABCDGISTW][ABCDGISTW]*\\)[ 	][ 	]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'"
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern char \\1;/p'"
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/  {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/  {\"\\2\", (lt_ptr) \\&\\2},/p'"
-
-# This is the shared library runtime path variable.
-runpath_var=LD_RUN_PATH
-
-# This is the shared library path variable.
-shlibpath_var=LD_LIBRARY_PATH
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=no
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=immediate
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=yes
-
-# Flag to hardcode $libdir into a binary during linking.
-# This must work even if $libdir does not exist.
-hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=""
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=no
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=no
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=unsupported
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=unknown
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-# Fix the shell variable $srcfile for the compiler.
-fix_srcfile_path=""
-
-# Set to yes if exported symbols are required.
-always_export_symbols=no
-
-# The commands to list exported symbols.
-export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols"
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=""
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-
-# Symbols that must always be exported.
-include_expsyms=""
-
-# ### END LIBTOOL CONFIG
-
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit 0
-fi
-
-# The name of this program.
-progname=`$echo "$0" | ${SED} 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.4.3
-TIMESTAMP=" (1.922.2.111 2002/10/23 02:54:36)"
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII                                                         
-case `echo A|od -x` in                                                         
- *[Cc]1*) # EBCDIC based system                                                
-  SP2NL="tr '\100' '\n'"                                                       
-  NL2SP="tr '\r\n' '\100\100'"                                                 
-  ;;                                                                           
- *) # Assume ASCII based system                                                
-  SP2NL="tr '\040' '\012'"                                                     
-  NL2SP="tr '\015\012' '\040\040'"                                             
-  ;;                                                                           
-esac                                                                           
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-  save_LANG="$LANG"; LANG=C; export LANG
-fi
-
-# Make sure IFS has a sensible default
-: ${IFS=" 	
-"}
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  echo "$modename: not configured to build any kind of library" 1>&2
-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit 1
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-
-# Parse our command line options once, thoroughly.
-while test $# -gt 0
-do
-  arg="$1"
-  shift
-
-  case $arg in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case $prev in
-    execute_dlfiles)
-      execute_dlfiles="$execute_dlfiles $arg"
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
-
-    prev=
-    prevopt=
-    continue
-  fi
-
-  # Have we seen a non-optional argument yet?
-  case $arg in
-  --help)
-    show_help=yes
-    ;;
-
-  --version)
-    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-    exit 0
-    ;;
-
-  --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
-    exit 0
-    ;;
-
-  --debug)
-    echo "$progname: enabling shell trace mode"
-    set -x
-    ;;
-
-  --dry-run | -n)
-    run=:
-    ;;
-
-  --features)
-    echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
-    else
-      echo "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
-    else
-      echo "disable static libraries"
-    fi
-    exit 0
-    ;;
-
-  --finish) mode="finish" ;;
-
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
-
-  --preserve-dup-deps) duplicate_deps="yes" ;;
-
-  --quiet | --silent)
-    show=:
-    ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
-    ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit 1
-    ;;
-
-  *)
-    nonopt="$arg"
-    break
-    ;;
-  esac
-done
-
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit 1
-fi
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    case $nonopt in
-    *cc | *++ | gcc* | *-gcc* | g++* | xlc*)
-      mode=link
-      for arg
-      do
-	case $arg in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-      done
-      ;;
-    *db | *dbx | *strace | *truss)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
-      ;;
-    *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
-
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
-      fi
-      ;;
-    esac
-  fi
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
-    exit 1
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
-
-  # These modes are in order of execution frequency so that they run quickly.
-  case $mode in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
-    # Get the compilation command and the source file.
-    base_compile=
-    prev=
-    lastarg=
-    srcfile="$nonopt"
-    suppress_output=
-
-    user_target=no
-    for arg
-    do
-      case $prev in
-      "") ;;
-      xcompiler)
-	# Aesthetically quote the previous argument.
-	prev=
-	lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-
-	case $arg in
-	# Double-quote args containing other shell metacharacters.
-	# Many Bourne shells cannot handle close brackets correctly
-	# in scan sets, so we specify it separately.
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-
-	# Add the previous argument to base_compile.
-	if test -z "$base_compile"; then
-	  base_compile="$lastarg"
-	else
-	  base_compile="$base_compile $lastarg"
-	fi
-	continue
-	;;
-      esac
-
-      # Accept any command-line options.
-      case $arg in
-      -o)
-	if test "$user_target" != "no"; then
-	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	  exit 1
-	fi
-	user_target=next
-	;;
-
-      -static)
-	build_old_libs=yes
-	continue
-	;;
-
-      -prefer-pic)
-	pic_mode=yes
-	continue
-	;;
-
-      -prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
-	lastarg=
-	save_ifs="$IFS"; IFS=','
-	for arg in $args; do
-	  IFS="$save_ifs"
-
-	  # Double-quote args containing other shell metacharacters.
-	  # Many Bourne shells cannot handle close brackets correctly
-	  # in scan sets, so we specify it separately.
-	  case $arg in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    arg="\"$arg\""
-	    ;;
-	  esac
-	  lastarg="$lastarg $arg"
-	done
-	IFS="$save_ifs"
-	lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
-	# Add the arguments to base_compile.
-	if test -z "$base_compile"; then
-	  base_compile="$lastarg"
-	else
-	  base_compile="$base_compile $lastarg"
-	fi
-	continue
-	;;
-      esac
-
-      case $user_target in
-      next)
-	# The next one is the -o target name
-	user_target=yes
-	continue
-	;;
-      yes)
-	# We got the output file
-	user_target=set
-	libobj="$arg"
-	continue
-	;;
-      esac
-
-      # Accept the current argument as the source file.
-      lastarg="$srcfile"
-      srcfile="$arg"
-
-      # Aesthetically quote the previous argument.
-
-      # Backslashify any backslashes, double quotes, and dollar signs.
-      # These are the only characters that are still specially
-      # interpreted inside of double-quoted scrings.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      case $lastarg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      # Add the previous argument to base_compile.
-      if test -z "$base_compile"; then
-	base_compile="$lastarg"
-      else
-	base_compile="$base_compile $lastarg"
-      fi
-    done
-
-    case $user_target in
-    set)
-      ;;
-    no)
-      # Get the name of the library object.
-      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-      ;;
-    *)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit 1
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSfmso]'
-    case $libobj in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.f90) xform=f90 ;;
-    *.for) xform=for ;;
-    esac
-
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
-    case $libobj in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
-    *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit 1
-      ;;
-    esac
-
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $libobj"
-    else
-      removelist="$libobj"
-    fi
-
-    $run $rm $removelist
-    trap "$run $rm $removelist; exit 1" 1 2 15
-
-    # On Cygwin there's no "real" PIC flag so we must build both object types
-    case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
-      pic_mode=default
-      ;;
-    esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-      # non-PIC code in shared libraries is not supported
-      pic_mode=default
-    fi
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit 1" 1 2 15
-    else
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until $run ln "$0" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-	echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-      echo $srcfile > "$lockfile"
-    fi
-
-    if test -n "$fix_srcfile_path"; then
-      eval srcfile=\"$fix_srcfile_path\"
-    fi
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      if test "$pic_mode" != no; then
-	# All platforms use -DPIC, to notify preprocessed assembler code.
-	command="$base_compile $srcfile $pic_flag -DPIC"
-      else
-	# Don't build PIC code
-	command="$base_compile $srcfile"
-      fi
-      if test "$build_old_libs" = yes; then
-	lo_libobj="$libobj"
-	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$dir" = "X$libobj"; then
-	  dir="$objdir"
-	else
-	  dir="$dir/$objdir"
-	fi
-	libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-
-	if test -d "$dir"; then
-	  $show "$rm $libobj"
-	  $run $rm $libobj
-	else
-	  $show "$mkdir $dir"
-	  $run $mkdir $dir
-	  status=$?
-	  if test $status -ne 0 && test ! -d $dir; then
-	    exit $status
-	  fi
-	fi
-      fi
-      if test "$compiler_o_lo" = yes; then
-	output_obj="$libobj"
-	command="$command -o $output_obj"
-      elif test "$compiler_c_o" = yes; then
-	output_obj="$obj"
-	command="$command -o $output_obj"
-      fi
-
-      $run $rm "$output_obj"
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	test -n "$output_obj" && $run $rm $removelist
-	exit 1
-      fi
-
-      if test "$need_locks" = warn &&
-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-	echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test x"$output_obj" != x"$libobj"; then
-	$show "$mv $output_obj $libobj"
-	if $run $mv $output_obj $libobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # If we have no pic_flag, then copy the object into place and finish.
-      if (test -z "$pic_flag" || test "$pic_mode" != default) &&
-	 test "$build_old_libs" = yes; then
-	# Rename the .lo from within objdir to obj
-	if test -f $obj; then
-	  $show $rm $obj
-	  $run $rm $obj
-	fi
-
-	$show "$mv $libobj $obj"
-	if $run $mv $libobj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-
-	xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$xdir" = "X$obj"; then
-	  xdir="."
-	else
-	  xdir="$xdir"
-	fi
-	baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
-	libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-	# Now arrange that obj and lo_libobj become the same file
-	$show "(cd $xdir && $LN_S $baseobj $libobj)"
-	if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
-	  # Unlock the critical section if it was locked
-	  if test "$need_locks" != no; then
-	    $run $rm "$lockfile"
-	  fi
-	  exit 0
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Allow error messages only from the first compilation.
-      suppress_output=' >/dev/null 2>&1'
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
-	# Don't build PIC code
-	command="$base_compile $srcfile"
-      else
-	# All platforms use -DPIC, to notify preprocessed assembler code.
-	command="$base_compile $srcfile $pic_flag -DPIC"
-      fi
-      if test "$compiler_c_o" = yes; then
-	command="$command -o $obj"
-	output_obj="$obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      command="$command$suppress_output"
-      $run $rm "$output_obj"
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	$run $rm $removelist
-	exit 1
-      fi
-
-      if test "$need_locks" = warn &&
-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
-	echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit 1
-      fi
-
-      # Just move the object if needed
-      if test x"$output_obj" != x"$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Create an invalid libtool object if no PIC, so that we do not
-      # accidentally link it into a program.
-      if test "$build_libtool_libs" != yes; then
-	$show "echo timestamp > $libobj"
-	$run eval "echo timestamp > \$libobj" || exit $?
-      else
-	# Move the .lo from within objdir
-	$show "$mv $libobj $lo_libobj"
-	if $run $mv $libobj $lo_libobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-    fi
-
-    # Unlock the critical section if it was locked
-    if test "$need_locks" != no; then
-      $run $rm "$lockfile"
-    fi
-
-    exit 0
-    ;;
-
-  # libtool link mode
-  link | relink)
-    modename="$modename: link"
-    case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invokation.
-      # allow_undefined=no
-
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    libtool_args="$nonopt"
-    compile_command="$nonopt"
-    finalize_command="$nonopt"
-
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    old_deplibs=
-    compiler_flags=
-    linker_flags=
-    dllsearchpath=
-    lib_search_path=`pwd`
-    inst_prefix_dir=
-
-    avoid_version=no
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    ltlibs=
-    module=no
-    no_install=no
-    objs=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case $arg in
-      -all-static | -static)
-	if test "X$arg" = "X-all-static"; then
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
-	  fi
-	  if test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	else
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	fi
-	build_libtool_libs=no
-	build_old_libs=yes
-	prefer_static_libs=yes
-	break
-	;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    while test $# -gt 0; do
-      arg="$1"
-      shift
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-	;;
-      *) qarg=$arg ;;
-      esac
-      libtool_args="$libtool_args $qarg"
-
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-	case $prev in
-	output)
-	  compile_command="$compile_command @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
-	  ;;
-	esac
-
-	case $prev in
-	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
-	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
-	    preload=yes
-	  fi
-	  case $arg in
-	  *.la | *.lo) ;;  # We handle these cases below.
-	  force)
-	    if test "$dlself" = no; then
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  self)
-	    if test "$prev" = dlprefiles; then
-	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-	      dlself=yes
-	    else
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  *)
-	    if test "$prev" = dlfiles; then
-	      dlfiles="$dlfiles $arg"
-	    else
-	      dlprefiles="$dlprefiles $arg"
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  esac
-	  ;;
-	expsyms)
-	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
-	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit 1
-	  fi
-	  prev=
-	  continue
-	  ;;
-	expsyms_regex)
-	  export_symbols_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	inst_prefix)
-	  inst_prefix_dir="$arg"
-	  prev=
-	  continue
-	  ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case $arg in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit 1
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
-	    esac
-	  else
-	    case "$xrpath " in
-	    *" $arg "*) ;;
-	    *) xrpath="$xrpath $arg" ;;
-	    esac
-	  fi
-	  prev=
-	  continue
-	  ;;
-	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
-	  prev=
-	  compile_command="$compile_command $wl$qarg"
-	  finalize_command="$finalize_command $wl$qarg"
-	  continue
-	  ;;
-	*)
-	  eval "$prev=\"\$arg\""
-	  prev=
-	  continue
-	  ;;
-	esac
-      fi # test -n $prev
-
-      prevarg="$arg"
-
-      case $arg in
-      -all-static)
-	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-	fi
-	continue
-	;;
-
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
-	;;
-
-      -avoid-version)
-	avoid_version=yes
-	continue
-	;;
-
-      -dlopen)
-	prev=dlfiles
-	continue
-	;;
-
-      -dlpreopen)
-	prev=dlprefiles
-	continue
-	;;
-
-      -export-dynamic)
-	export_dynamic=yes
-	continue
-	;;
-
-      -export-symbols | -export-symbols-regex)
-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit 1
-	fi
-	if test "X$arg" = "X-export-symbols"; then
-	  prev=expsyms
-	else
-	  prev=expsyms_regex
-	fi
-	continue
-	;;
-
-      -inst-prefix-dir)
-       prev=inst_prefix
-       continue
-       ;;
-
-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-      # so, if we see these flags be careful not to treat them like -L
-      -L[A-Z][A-Z]*:*)
-        if test -z "$with_gcc"; then
-	  case $host in
-	  *-*-irix* | *-*-nonstopux*)
-	    compile_command="$compile_command $arg"
-	    finalize_command="$finalize_command $arg"
-	    ;;
-	  esac
-	fi
-	continue
-	;;
-
-      -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    exit 1
-	  fi
-	  dir="$absdir"
-	  ;;
-	esac
-	case "$deplibs " in
-	*" -L$dir "*) ;;
-	*)
-	  deplibs="$deplibs -L$dir"
-	  lib_search_path="$lib_search_path $dir"
-	  ;;
-	esac
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  case :$dllsearchpath: in
-	  *":$dir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$dir";;
-	  esac
-	  ;;
-	esac
-	continue
-	;;
-
-      -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-	  case $host in
-	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
-	    # These systems don't actually have a C or math library (as such)
-	    continue
-	    ;;
-	  *-*-mingw* | *-*-os2*)
-	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  esac
-	 elif test "X$arg" = "X-lc_r"; then
-	  case $host in
-	 *-*-openbsd* | *-*-freebsd*)
-	    # Do not include libc_r directly, use -pthread flag.
-	    continue
-	    ;;
-	  esac
-	fi
-	deplibs="$deplibs $arg"
-	continue
-	;;
-
-      -module)
-	module=yes
-	continue
-	;;
-
-      -no-fast-install)
-	fast_install=no
-	continue
-	;;
-
-      -no-install)
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  # The PATH hackery in wrapper scripts is required on Windows
-	  # in order for the loader to find any dlls it needs.
-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
-	  fast_install=no
-	  ;;
-	*) no_install=yes ;;
-	esac
-	continue
-	;;
-
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
-
-      -o) prev=output ;;
-
-      -release)
-	prev=release
-	continue
-	;;
-
-      -rpath)
-	prev=rpath
-	continue
-	;;
-
-      -R)
-	prev=xrpath
-	continue
-	;;
-
-      -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit 1
-	  ;;
-	esac
-	case "$xrpath " in
-	*" $dir "*) ;;
-	*) xrpath="$xrpath $dir" ;;
-	esac
-	continue
-	;;
-
-      -static)
-	# The effects of -static are defined in a previous loop.
-	# We used to do the same as -all-static on platforms that
-	# didn't have a PIC flag, but the assumption that the effects
-	# would be equivalent was wrong.  It would break on at least
-	# Digital Unix and AIX.
-	continue
-	;;
-
-      -thread-safe)
-	thread_safe=yes
-	continue
-	;;
-
-      -version-info)
-	prev=vinfo
-	continue
-	;;
-
-      -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Wl,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $wl$flag"
-	  linker_flags="$linker_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Xlinker)
-	prev=xlinker
-	continue
-	;;
-
-      -Kthread | -mthreads | -mt | -pthread | -pthreads | -threads | -qthreaded | -kthread )
-        compiler_flags="$compiler_flags $arg"
-	continue
-	;;
-
-      # Some other compiler flag.
-      -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-
-      *.lo | *.$objext)
-	# A library or standard object.
-	if test "$prev" = dlfiles; then
-	  # This file was specified with -dlopen.
-	  if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-	    dlfiles="$dlfiles $arg"
-	    prev=
-	    continue
-	  else
-	    # If libtool objects are unsupported, then we need to preload.
-	    prev=dlprefiles
-	  fi
-	fi
-
-	if test "$prev" = dlprefiles; then
-	  # Preload the old-style object.
-	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
-	  prev=
-	else
-	  case $arg in
-	  *.lo) libobjs="$libobjs $arg" ;;
-	  *) objs="$objs $arg" ;;
-	  esac
-	fi
-	;;
-
-      *.$libext)
-	# An archive.
-	deplibs="$deplibs $arg"
-	old_deplibs="$old_deplibs $arg"
-	continue
-	;;
-
-      *.la)
-	# A libtool-controlled library.
-
-	if test "$prev" = dlfiles; then
-	  # This library was specified with -dlopen.
-	  dlfiles="$dlfiles $arg"
-	  prev=
-	elif test "$prev" = dlprefiles; then
-	  # The library was specified with -dlpreopen.
-	  dlprefiles="$dlprefiles $arg"
-	  prev=
-	else
-	  deplibs="$deplibs $arg"
-	fi
-	continue
-	;;
-
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-      esac # arg
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-      fi
-    done # argument parsing loop
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
-    fi
-
-    # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-    libobjs_save="$libobjs"
-
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-    else
-      shlib_search_path=
-    fi
-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$output_objdir" = "X$output"; then
-      output_objdir="$objdir"
-    else
-      output_objdir="$output_objdir/$objdir"
-    fi
-    # Create the object directory.
-    if test ! -d $output_objdir; then
-      $show "$mkdir $output_objdir"
-      $run $mkdir $output_objdir
-      status=$?
-      if test $status -ne 0 && test ! -d $output_objdir; then
-	exit $status
-      fi
-    fi
-
-    # Determine the type of output
-    case $output in
-    "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-      ;;
-    *.$libext) linkmode=oldlib ;;
-    *.lo | *.$objext) linkmode=obj ;;
-    *.la) linkmode=lib ;;
-    *) linkmode=prog ;; # Anything else should be a program.
-    esac
-
-    specialdeplibs=
-    libs=
-    # Find all interdependent deplibs by searching for libraries
-    # that are linked more than once (e.g. -la -lb -la)
-    for deplib in $deplibs; do
-      if test "X$duplicate_deps" = "Xyes" ; then
-	case "$libs " in
-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	esac
-      fi
-      libs="$libs $deplib"
-    done
-    deplibs=
-    newdependency_libs=
-    newlib_search_path=
-    need_relink=no # whether we're linking any uninstalled libtool libraries
-    notinst_deplibs= # not-installed libtool libraries
-    notinst_path= # paths that contain not-installed libtool libraries
-    case $linkmode in
-    lib)
-	passes="conv link"
-	for file in $dlfiles $dlprefiles; do
-	  case $file in
-	  *.la) ;;
-	  *)
-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit 1
-	    ;;
-	  esac
-	done
-	;;
-    prog)
-	compile_deplibs=
-	finalize_deplibs=
-	alldeplibs=no
-	newdlfiles=
-	newdlprefiles=
-	passes="conv scan dlopen dlpreopen link"
-	;;
-    *)  passes="conv"
-	;;
-    esac
-    for pass in $passes; do
-      if test $linkmode = prog; then
-	# Determine which files to process
-	case $pass in
-	dlopen)
-	  libs="$dlfiles"
-	  save_deplibs="$deplibs" # Collect dlpreopened libraries
-	  deplibs=
-	  ;;
-	dlpreopen) libs="$dlprefiles" ;;
-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
-	esac
-      fi
-      for deplib in $libs; do
-	lib=
-	found=no
-	case $deplib in
-	-l*)
-	  if test $linkmode = oldlib && test $linkmode = obj; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
-	    continue
-	  fi
-	  if test $pass = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
-	    # Search the libtool library
-	    lib="$searchdir/lib${name}.la"
-	    if test -f "$lib"; then
-	      found=yes
-	      break
-	    fi
-	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  fi
-	  ;; # -l
-	-L*)
-	  case $linkmode in
-	  lib)
-	    deplibs="$deplib $deplibs"
-	    test $pass = conv && continue
-	    newdependency_libs="$deplib $newdependency_libs"
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    ;;
-	  prog)
-	    if test $pass = conv; then
-	      deplibs="$deplib $deplibs"
-	      continue
-	    fi
-	    if test $pass = scan; then
-	      deplibs="$deplib $deplibs"
-	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    ;;
-	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
-	    ;;
-	  esac # linkmode
-	  continue
-	  ;; # -L
-	-R*)
-	  if test $pass = link; then
-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-	    # Make sure the xrpath contains only unique directories.
-	    case "$xrpath " in
-	    *" $dir "*) ;;
-	    *) xrpath="$xrpath $dir" ;;
-	    esac
-	  fi
-	  deplibs="$deplib $deplibs"
-	  continue
-	  ;;
-	*.la) lib="$deplib" ;;
-	*.$libext)
-	  if test $pass = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  case $linkmode in
-	  lib)
-	    if test "$deplibs_check_method" != pass_all; then
-	      echo
-	      echo "*** Warning: Trying to link with static lib archive $deplib."
-	      echo "*** I have the capability to make that library automatically link in when"
-	      echo "*** you link to this library.  But I can only do this if you have a"
-	      echo "*** shared version of the library, which you do not appear to have"
-	      echo "*** because the file extensions .$libext of this argument makes me believe"
-	      echo "*** that it is just a static archive that I should not used here."
-	    else
-	      echo
-	      echo "*** Warning: Linking the shared library $output against the"
-	      echo "*** static library $deplib is not portable!"
-	      deplibs="$deplib $deplibs"
-	    fi
-	    continue
-	    ;;
-	  prog)
-	    if test $pass != link; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    continue
-	    ;;
-	  esac # linkmode
-	  ;; # *.$libext
-	*.lo | *.$objext)
-	  if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	    # If there is no dlopen support or we're linking statically,
-	    # we need to preload.
-	    newdlprefiles="$newdlprefiles $deplib"
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    newdlfiles="$newdlfiles $deplib"
-	  fi
-	  continue
-	  ;;
-	%DEPLIBS%)
-	  alldeplibs=yes
-	  continue
-	  ;;
-	esac # case $deplib
-	if test $found = yes || test -f "$lib"; then :
-	else
-	  $echo "$modename: cannot find the library \`$lib'" 1>&2
-	  exit 1
-	fi
-
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit 1
-	fi
-
-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$ladir" = "X$lib" && ladir="."
-
-	dlname=
-	dlopen=
-	dlpreopen=
-	libdir=
-	library_names=
-	old_library=
-	# If the library was installed with an old release of libtool,
-	# it will not redefine variable installed.
-	installed=yes
-
-	# Read the .la file
-	case $lib in
-	*/* | *\\*) . $lib ;;
-	*) . ./$lib ;;
-	esac
-
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test $linkmode = oldlib && test $linkmode = obj; }; then
-	   # Add dl[pre]opened files of deplib
-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-	fi
-
-	if test $pass = conv; then
-	  # Only check for convenience libraries
-	  deplibs="$lib $deplibs"
-	  if test -z "$libdir"; then
-	    if test -z "$old_library"; then
-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit 1
-	    fi
-	    # It is a libtool convenience library, so add in its objects.
-	    convenience="$convenience $ladir/$objdir/$old_library"
-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-              if test "X$duplicate_deps" = "Xyes" ; then
-	        case "$tmp_libs " in
-	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	        esac
-              fi
-	      tmp_libs="$tmp_libs $deplib"
-	    done
-	  elif test $linkmode != prog && test $linkmode != lib; then
-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit 1
-	  fi
-	  continue
-	fi # $pass = conv
-
-	# Get the name of the library we link against.
-	linklib=
-	for l in $old_library $library_names; do
-	  linklib="$l"
-	done
-	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit 1
-	fi
-
-	# This library was specified with -dlopen.
-	if test $pass = dlopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit 1
-	  fi
-	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking
-	    # statically, we need to preload.
-	    dlprefiles="$dlprefiles $lib"
-	  else
-	    newdlfiles="$newdlfiles $lib"
-	  fi
-	  continue
-	fi # $pass = dlopen
-
-	# We need an absolute path.
-	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-	*)
-	  abs_ladir=`cd "$ladir" && pwd`
-	  if test -z "$abs_ladir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-	    abs_ladir="$ladir"
-	  fi
-	  ;;
-	esac
-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
-	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
-	  else
-	    dir="$libdir"
-	    absdir="$libdir"
-	  fi
-	else
-	  dir="$ladir/$objdir"
-	  absdir="$abs_ladir/$objdir"
-	  # Remove this search path later
-	  notinst_path="$notinst_path $abs_ladir"
-	fi # $installed = yes
-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
-	# This library was specified with -dlpreopen.
-	if test $pass = dlpreopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit 1
-	  fi
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    newdlprefiles="$newdlprefiles $dir/$old_library"
-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
-	  elif test -n "$dlname"; then
-	    newdlprefiles="$newdlprefiles $dir/$dlname"
-	  else
-	    newdlprefiles="$newdlprefiles $dir/$linklib"
-	  fi
-	fi # $pass = dlpreopen
-
-	if test -z "$libdir"; then
-	  # Link the convenience library
-	  if test $linkmode = lib; then
-	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$dir/$old_library $compile_deplibs"
-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
-	  else
-	    deplibs="$lib $deplibs"
-	  fi
-	  continue
-	fi
-
-	if test $linkmode = prog && test $pass != link; then
-	  newlib_search_path="$newlib_search_path $ladir"
-	  deplibs="$lib $deplibs"
-
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
-	  fi
-
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    case $deplib in
-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
-	    esac
-	    # Need to link against all dependency_libs?
-	    if test $linkalldeplibs = yes; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      # Need to hardcode shared library paths
-	      # or/and link against static libraries
-	      newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done # for deplib
-	  continue
-	fi # $linkmode = prog...
-
-	link_static=no # Whether the deplib will be linked statically
-	if test -n "$library_names" &&
-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
-	  # Link against this shared library
-
-	  if test "$linkmode,$pass" = "prog,link" ||
-	   { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	    if test $linkmode = prog; then
-	      # We need to hardcode the library path
-	      if test -n "$shlibpath_var"; then
-		# Make sure the rpath contains only unique directories.
-		case "$temp_rpath " in
-		*" $dir "*) ;;
-		*" $absdir "*) ;;
-		*) temp_rpath="$temp_rpath $dir" ;;
-		esac
-	      fi
-	    fi
-	  fi # $linkmode,$pass = prog,link...
-
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-
-	  if test "$installed" = no; then
-	    notinst_deplibs="$notinst_deplibs $lib"
-	    need_relink=yes
-	  fi
-
-	  if test -n "$old_archive_from_expsyms_cmds"; then
-	    # figure out the soname
-	    set dummy $library_names
-	    realname="$2"
-	    shift; shift
-	    libname=`eval \\$echo \"$libname_spec\"`
-	    # use dlname if we got it. it's perfectly good, no?
-	    if test -n "$dlname"; then
-	      soname="$dlname"
-	    elif test -n "$soname_spec"; then
-	      # bleh windows
-	      case $host in
-	      *cygwin*)
-		major=`expr $current - $age`
-		versuffix="-$major"
-		;;
-	      esac
-	      eval soname=\"$soname_spec\"
-	    else
-	      soname="$realname"
-	    fi
-
-	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
-	    soname=`echo $soroot | ${SED} -e 's/^.*\///'`
-	    newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
-	    # If the library has no export list, then create one now
-	    if test -f "$output_objdir/$soname-def"; then :
-	    else
-	      $show "extracting exported symbol list from \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      eval cmds=\"$extract_expsyms_cmds\"
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    # Create $newlib
-	    if test -f "$output_objdir/$newlib"; then :; else
-	      $show "generating import library for \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      eval cmds=\"$old_archive_from_expsyms_cmds\"
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # make sure the library variables are pointing to the new library
-	    dir=$output_objdir
-	    linklib=$newlib
-	  fi # test -n $old_archive_from_expsyms_cmds
-
-	  if test $linkmode = prog || test "$mode" != relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    lib_linked=yes
-	    case $hardcode_action in
-	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = no; then
-		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
-		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    relink)
-	      if test "$hardcode_direct" = yes; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$dir"
-		# Try looking first in the location we're being installed to.
-		if test -n "$inst_prefix_dir"; then
-		  case "$libdir" in
-		  [\/]*)
-		    add_dir="-L$inst_prefix_dir$libdir $add_dir"
-		    ;;
-		  esac
-		fi
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    *) lib_linked=no ;;
-	    esac
-
-	    if test "$lib_linked" != yes; then
-	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit 1
-	    fi
-
-	    if test -n "$add_shlibpath"; then
-	      case :$compile_shlibpath: in
-	      *":$add_shlibpath:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-	      esac
-	    fi
-	    if test $linkmode = prog; then
-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes && \
-		 test "$hardcode_minus_L" != yes && \
-		 test "$hardcode_shlibpath_var" = yes; then
-		case :$finalize_shlibpath: in
-		*":$libdir:"*) ;;
-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-		esac
-	      fi
-	    fi
-	  fi
-
-	  if test $linkmode = prog || test "$mode" = relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case :$finalize_shlibpath: in
-	      *":$libdir:"*) ;;
-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-	      esac
-	      add="-l$name"
-	    else
-	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
-	      # Try looking first in the location we're being installed to.
-	      if test -n "$inst_prefix_dir"; then
-		case "$libdir" in
-		[\/]*)
-		  add_dir="-L$inst_prefix_dir$libdir $add_dir"
-		  ;;
-		esac
-	      fi
-	      add="-l$name"
-	    fi
-
-	    if test $linkmode = prog; then
-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	    fi
-	  fi
-	elif test $linkmode = prog; then
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-
-	  # Try to link the static library
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_deplibs="$dir/$linklib $compile_deplibs"
-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
-	  else
-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-	  fi
-	elif test "$build_libtool_libs" = yes; then
-	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
-	    # We're trying link a shared library against a static one
-	    # but the system doesn't support it.
-
-	    # Just print a warning and add the library to dependency_libs so
-	    # that the program can be linked against the static library.
-	    echo
-	    echo "*** Warning: This system can not link to static lib archive $lib."
-	    echo "*** I have the capability to make that library automatically link in when"
-	    echo "*** you link to this library.  But I can only do this if you have a"
-	    echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
-	      echo "*** But as you try to build a module library, libtool will still create "
-	      echo "*** a static module, that should work as long as the dlopening application"
-	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
-	      if test -z "$global_symbol_pipe"; then
-		echo
-		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	      fi
-	      if test "$build_old_libs" = no; then
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  else
-	    convenience="$convenience $dir/$old_library"
-	    old_convenience="$old_convenience $dir/$old_library"
-	    deplibs="$dir/$old_library $deplibs"
-	    link_static=yes
-	  fi
-	fi # link shared/static library?
-
-	if test $linkmode = lib; then
-	  if test -n "$dependency_libs" &&
-	     { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
-	       test $link_static = yes; }; then
-	    # Extract -R from dependency_libs
-	    temp_deplibs=
-	    for libdir in $dependency_libs; do
-	      case $libdir in
-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
-		   case " $xrpath " in
-		   *" $temp_xrpath "*) ;;
-		   *) xrpath="$xrpath $temp_xrpath";;
-		   esac;;
-	      *) temp_deplibs="$temp_deplibs $libdir";;
-	      esac
-	    done
-	    dependency_libs="$temp_deplibs"
-	  fi
-
-	  newlib_search_path="$newlib_search_path $absdir"
-	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-	  # ... and its dependency_libs
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    newdependency_libs="$deplib $newdependency_libs"
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
-
-	  if test $link_all_deplibs != no; then
-	    # Add the search paths of all dependency libraries
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      -L*) path="$deplib" ;;
-	      *.la)
-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-		test "X$dir" = "X$deplib" && dir="."
-		# We need an absolute path.
-		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-		*)
-		  absdir=`cd "$dir" && pwd`
-		  if test -z "$absdir"; then
-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-		    absdir="$dir"
-		  fi
-		  ;;
-		esac
-		if grep "^installed=no" $deplib > /dev/null; then
-		  path="-L$absdir/$objdir"
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -z "$libdir"; then
-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit 1
-		  fi
-		  if test "$absdir" != "$libdir"; then
-		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-		  fi
-		  path="-L$absdir"
-		fi
-		;;
-	      *) continue ;;
-	      esac
-	      case " $deplibs " in
-	      *" $path "*) ;;
-	      *) deplibs="$deplibs $path" ;;
-	      esac
-	    done
-	  fi # link_all_deplibs != no
-	fi # linkmode = lib
-      done # for deplib in $libs
-      if test $pass = dlpreopen; then
-	# Link the dlpreopened libraries before other libraries
-	for deplib in $save_deplibs; do
-	  deplibs="$deplib $deplibs"
-	done
-      fi
-      if test $pass != dlopen; then
-	test $pass != scan && dependency_libs="$newdependency_libs"
-	if test $pass != conv; then
-	  # Make sure lib_search_path contains only unique directories.
-	  lib_search_path=
-	  for dir in $newlib_search_path; do
-	    case "$lib_search_path " in
-	    *" $dir "*) ;;
-	    *) lib_search_path="$lib_search_path $dir" ;;
-	    esac
-	  done
-	  newlib_search_path=
-	fi
-
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
-	  vars="compile_deplibs finalize_deplibs"
-	fi
-	for var in $vars dependency_libs; do
-	  # Add libraries to $var in reverse order
-	  eval tmp_libs=\"\$$var\"
-	  new_libs=
-	  for deplib in $tmp_libs; do
-	    case $deplib in
-	    -L*) new_libs="$deplib $new_libs" ;;
-	    *)
-	      case " $specialdeplibs " in
-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
-	      *)
-		case " $new_libs " in
-		*" $deplib "*) ;;
-		*) new_libs="$deplib $new_libs" ;;
-		esac
-		;;
-	      esac
-	      ;;
-	    esac
-	  done
-	  tmp_libs=
-	  for deplib in $new_libs; do
-	    case $deplib in
-	    -L*)
-	      case " $tmp_libs " in
-	      *" $deplib "*) ;;
-	      *) tmp_libs="$tmp_libs $deplib" ;;
-	      esac
-	      ;;
-	    *) tmp_libs="$tmp_libs $deplib" ;;
-	    esac
-	  done
-	  eval $var=\"$tmp_libs\"
-	done # for var
-      fi
-      if test "$pass" = "conv" &&
-       { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
-	libs="$deplibs" # reset libs
-	deplibs=
-      fi
-    done # for pass
-    if test $linkmode = prog; then
-      dlfiles="$newdlfiles"
-      dlprefiles="$newdlprefiles"
-    fi
-
-    case $linkmode in
-    oldlib)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-      fi
-
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      objs="$objs$old_deplibs"
-      ;;
-
-    lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case $outputname in
-      lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-	eval libname=\"$libname_spec\"
-	;;
-      *)
-	if test "$module" = no; then
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-	if test "$need_lib_prefix" != no; then
-	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	  eval libname=\"$libname_spec\"
-	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	fi
-	;;
-      esac
-
-      if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit 1
-	else
-	  echo
-	  echo "*** Warning: Linking the shared library $output against the non-libtool"
-	  echo "*** objects $objs is not portable!"
-	  libobjs="$libobjs $objs"
-	fi
-      fi
-
-      if test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
-      fi
-
-      set dummy $rpath
-      if test $# -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
-
-      oldlibs=
-      if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
-	  # Building a libtool convenience library.
-	  libext=al
-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
-	  build_libtool_libs=convenience
-	  build_old_libs=yes
-	fi
-
-	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
-	fi
-
-	if test -n "$release"; then
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-	fi
-      else
-
-	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
-	set dummy $vinfo 0 0 0
-	IFS="$save_ifs"
-
-	if test -n "$8"; then
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	current="$2"
-	revision="$3"
-	age="$4"
-
-	# Check that each of the things are valid numbers.
-	case $current in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	case $revision in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	case $age in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	if test $age -gt $current; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit 1
-	fi
-
-	# Calculate the version variables.
-	major=
-	versuffix=
-	verstring=
-	case $version_type in
-	none) ;;
-
-	darwin)
-	  # Like Linux, but with the current version available in
-	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
-	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-	  ;;
-
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current";
-	  ;;
-
-	irix | nonstopux)
-	  major=`expr $current - $age + 1`
-
-	  case $version_type in
-	    nonstopux) verstring_prefix=nonstopux ;;
-	    *)         verstring_prefix=sgi ;;
-	  esac
-	  verstring="$verstring_prefix$major.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$revision
-	  while test $loop != 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring_prefix$major.$iface:$verstring"
-	  done
-
-	  # Before this point, $major must not contain `.'.
-	  major=.$major
-	  versuffix="$major.$revision"
-	  ;;
-
-	linux)
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  ;;
-
-	osf)
-	  major=.`expr $current - $age`
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$age
-	  while test $loop != 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring:${iface}.0"
-	  done
-
-	  # Make executables depend on our current version.
-	  verstring="$verstring:${current}.0"
-	  ;;
-
-	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
-	  ;;
-
-	windows)
-	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
-	  versuffix="-$major"
-	  ;;
-
-	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	# Clear the version info if we defaulted, and they specified a release.
-	if test -z "$vinfo" && test -n "$release"; then
-	  major=
-	  verstring="0.0"
-	  case $version_type in
-	  darwin)
-	    # we can't check for "0.0" in archive_cmds due to quoting
-	    # problems, so we reset it completely
-	    verstring=""
-	    ;;
-	  *)
-	    verstring="0.0"
-	    ;;
-	  esac
-	  if test "$need_version" = no; then
-	    versuffix=
-	  else
-	    versuffix=".0.0"
-	  fi
-	fi
-
-	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
-	  major=
-	  versuffix=
-	  verstring=""
-	fi
-
-	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
-	    build_libtool_libs=no
-	    build_old_libs=yes
-	  fi
-	else
-	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
-	fi
-      fi
-
-      if test "$mode" != relink; then
-	# Remove our outputs.
-	$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
-	$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
-      fi
-
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
-	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-      fi
-
-      # Eliminate all temporary directories.
-      for path in $notinst_path; do
-	lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
-	deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
-	dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
-      done
-
-      if test -n "$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-	if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
-	  dependency_libs="$temp_xrpath $dependency_libs"
-	fi
-      fi
-
-      # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
-      dlfiles=
-      for lib in $old_dlfiles; do
-	case " $dlprefiles $dlfiles " in
-	*" $lib "*) ;;
-	*) dlfiles="$dlfiles $lib" ;;
-	esac
-      done
-
-      # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
-      dlprefiles=
-      for lib in $old_dlprefiles; do
-	case "$dlprefiles " in
-	*" $lib "*) ;;
-	*) dlprefiles="$dlprefiles $lib" ;;
-	esac
-      done
-
-      if test "$build_libtool_libs" = yes; then
-	if test -n "$rpath"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
-	    # these systems don't actually have a c library (as such)!
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs -framework System"
-	    ;;
-	  *-*-netbsd*)
-	    # Don't link with libc until the a.out ld.so is fixed.
-	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
-	    # Do not include libc due to us having libc/libc_r.
-	    ;;
-	  *)
-	    # Add libc to deplibs on all other systems if necessary.
-	    if test $build_libtool_need_lc = "yes"; then
-	      deplibs="$deplibs -lc"
-	    fi
-	    ;;
-	  esac
-	fi
-
-	# Transform deplibs into only deplibs that can be linked in shared.
-	name_save=$name
-	libname_save=$libname
-	release_save=$release
-	versuffix_save=$versuffix
-	major_save=$major
-	# I'm not sure if I'm treating the release correctly.  I think
-	# release should show up in the -l (ie -lgmp5) so we don't want to
-	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
-	newdeplibs=
-	droppeddeps=no
-	case $deplibs_check_method in
-	pass_all)
-	  # Don't check for shared/static.  Everything works.
-	  # This might be a little naive.  We might want to check
-	  # whether the library exists or not.  But this is on
-	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behaviour.
-	  newdeplibs=$deplibs
-	  ;;
-	test_compile)
-	  # This code stresses the "libraries are programs" paradigm to its
-	  # limits. Maybe even breaks it.  We compile a program, linking it
-	  # against the deplibs as a proxy for the library.  Then we can check
-	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
-	  cat > conftest.c <<EOF
-	  int main() { return 0; }
-EOF
-	  $rm conftest
-	  $CC -o conftest conftest.c $deplibs
-	  if test $? -eq 0 ; then
-	    ldd_output=`ldd conftest`
-	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
-	      # If $name is empty we are operating on a -L argument.
-	      if test -n "$name" && test "$name" != "0"; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		set dummy $deplib_matches
-		deplib_match=$2
-		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		  newdeplibs="$newdeplibs $i"
-		else
-		  droppeddeps=yes
-		  echo
-		  echo "*** Warning: dynamic linker does not accept needed library $i."
-		  echo "*** I have the capability to make that library automatically link in when"
-		  echo "*** you link to this library.  But I can only do this if you have a"
-		  echo "*** shared version of the library, which I believe you do not have"
-		  echo "*** because a test_compile did reveal that the linker did not use it for"
-		  echo "*** its dynamic dependency list that programs get resolved with at runtime."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  else
-	    # Error occured in the first compile.  Let's try to salvage
-	    # the situation: Compile a separate program for each library.
-	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
-	     # If $name is empty we are operating on a -L argument.
-	      if test -n "$name" && test "$name" != "0"; then
-		$rm conftest
-		$CC -o conftest conftest.c $i
-		# Did it work?
-		if test $? -eq 0 ; then
-		  ldd_output=`ldd conftest`
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
-		  else
-		    droppeddeps=yes
-		    echo
-		    echo "*** Warning: dynamic linker does not accept needed library $i."
-		    echo "*** I have the capability to make that library automatically link in when"
-		    echo "*** you link to this library.  But I can only do this if you have a"
-		    echo "*** shared version of the library, which you do not appear to have"
-		    echo "*** because a test_compile did reveal that the linker did not use this one"
-		    echo "*** as a dynamic dependency that programs can get resolved with at runtime."
-		  fi
-		else
-		  droppeddeps=yes
-		  echo
-		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  echo "***  make it link in!  You will probably need to install it or some"
-		  echo "*** library that it depends on before this library will be fully"
-		  echo "*** functional.  Installing it before continuing would be even better."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  fi
-	  ;;
-	file_magic*)
-	  set dummy $deplibs_check_method
-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
-	      libname=`eval \\$echo \"$libname_spec\"`
-	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		    for potent_lib in $potential_libs; do
-		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
-			 | grep " -> " >/dev/null; then
-			continue
-		      fi
-		      # The statement above tries to avoid entering an
-		      # endless loop below, in case of cyclic links.
-		      # We might still enter an endless loop, since a link
-		      # loop can be closed while we follow links,
-		      # but so what?
-		      potlib="$potent_lib"
-		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-			esac
-		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | ${SED} 10q \
-			 | egrep "$file_magic_regex" > /dev/null; then
-			newdeplibs="$newdeplibs $a_deplib"
-			a_deplib=""
-			break 2
-		      fi
-		    done
-	      done
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		echo
-		echo "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  echo "*** with $libname but no candidates were found. (...for file magic test)"
-		else
-		  echo "*** with $libname and none of the candidates passed a file format test"
-		  echo "*** using a file magic. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	match_pattern*)
-	  set dummy $deplibs_check_method
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
-	      libname=`eval \\$echo \"$libname_spec\"`
-	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		for potent_lib in $potential_libs; do
-		  potlib="$potent_lib" # see symlink-check below in file_magic test
-		  if eval echo \"$potent_lib\" 2>/dev/null \
-		      | ${SED} 10q \
-		      | egrep "$match_pattern_regex" > /dev/null; then
-		    newdeplibs="$newdeplibs $a_deplib"
-		    a_deplib=""
-		    break 2
-		  fi
-		done
-	      done
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		echo
-		echo "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  echo "*** with $libname but no candidates were found. (...for regex pattern test)"
-		else
-		  echo "*** with $libname and none of the candidates passed a file format test"
-		  echo "*** using a regex pattern. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	none | unknown | *)
-	  newdeplibs=""
-	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
-	     grep . >/dev/null; then
-	    echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
-	    else
-	      echo "*** Warning: inter-library dependencies are not known to be supported."
-	    fi
-	    echo "*** All declared inter-library dependencies are being dropped."
-	    droppeddeps=yes
-	  fi
-	  ;;
-	esac
-	versuffix=$versuffix_save
-	major=$major_save
-	release=$release_save
-	libname=$libname_save
-	name=$name_save
-
-	case $host in
-	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library is the System framework
-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	  ;;
-	esac
-
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
-	    echo
-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    echo "*** a static module, that should work as long as the dlopening"
-	    echo "*** application is linked with the -dlopen flag."
-	    if test -z "$global_symbol_pipe"; then
-	      echo
-	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
-	      build_libtool_libs=module
-	      build_old_libs=yes
-	    else
-	      build_libtool_libs=no
-	    fi
-	  else
-	    echo "*** The inter-library dependencies that have been dropped here will be"
-	    echo "*** automatically added whenever a program is linked with this library"
-	    echo "*** or is declared to -dlopen it."
-
-	    if test $allow_undefined = no; then
-	      echo
-	      echo "*** Since this library must not contain undefined symbols,"
-	      echo "*** because either the platform does not support them or"
-	      echo "*** it was explicitly requested with -no-undefined,"
-	      echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  fi
-	fi
-	# Done checking deplibs!
-	deplibs=$newdeplibs
-      fi
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	if test $hardcode_into_libs = yes; then
-	  # Hardcode the library paths
-	  hardcode_libdirs=
-	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
-	  for libdir in $rpath; do
-	    if test -n "$hardcode_libdir_flag_spec"; then
-	      if test -n "$hardcode_libdir_separator"; then
-		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
-		else
-		  # Just accumulate the unique libdirs.
-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		    ;;
-		  *)
-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		    ;;
-		  esac
-		fi
-	      else
-		eval flag=\"$hardcode_libdir_flag_spec\"
-		dep_rpath="$dep_rpath $flag"
-	      fi
-	    elif test -n "$runpath_var"; then
-	      case "$perm_rpath " in
-	      *" $libdir "*) ;;
-	      *) perm_rpath="$perm_rpath $libdir" ;;
-	      esac
-	    fi
-	  done
-	  # Substitute the hardcoded libdirs into the rpath.
-	  if test -n "$hardcode_libdir_separator" &&
-	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
-	    eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-	  fi
-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
-	    # We should set the runpath_var.
-	    rpath=
-	    for dir in $perm_rpath; do
-	      rpath="$rpath$dir:"
-	    done
-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-	  fi
-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-	fi
-
-	shlibpath="$finalize_shlibpath"
-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-	if test -n "$shlibpath"; then
-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-	fi
-
-	# Get the real and link names of the library.
-	eval library_names=\"$library_names_spec\"
-	set dummy $library_names
-	realname="$2"
-	shift; shift
-
-	if test -n "$soname_spec"; then
-	  eval soname=\"$soname_spec\"
-	else
-	  soname="$realname"
-	fi
-	test -z "$dlname" && dlname=$soname
-
-	lib="$output_objdir/$realname"
-	for link
-	do
-	  linknames="$linknames $link"
-	done
-
-	# Ensure that we have .o objects for linkers which dislike .lo
-	# (e.g. aix) in case we are running --disable-static
-	for obj in $libobjs; do
-	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$obj"; then
-	    xdir="."
-	  else
-	    xdir="$xdir"
-	  fi
-	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-	  if test ! -f $xdir/$oldobj; then
-	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
-	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
-	  fi
-	done
-
-	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
-	# Prepare the list of exported symbols
-	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    eval cmds=\"$export_symbols_cmds\"
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd" || exit $?
-	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
-	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-	fi
-
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
-	fi
-
-	if test -n "$convenience"; then
-	  if test -n "$whole_archive_flag_spec"; then
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  else
-	    gentop="$output_objdir/${outputname}x"
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "mkdir $gentop"
-	    $run mkdir "$gentop"
-	    status=$?
-	    if test $status -ne 0 && test ! -d "$gentop"; then
-	      exit $status
-	    fi
-	    generated="$generated $gentop"
-
-	    for xlib in $convenience; do
-	      # Extract the objects.
-	      case $xlib in
-	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	      *) xabs=`pwd`"/$xlib" ;;
-	      esac
-	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	      xdir="$gentop/$xlib"
-
-	      $show "${rm}r $xdir"
-	      $run ${rm}r "$xdir"
-	      $show "mkdir $xdir"
-	      $run mkdir "$xdir"
-	      status=$?
-	      if test $status -ne 0 && test ! -d "$xdir"; then
-		exit $status
-	      fi
-	      $show "(cd $xdir && $AR x $xabs)"
-	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	      libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-	    done
-	  fi
-	fi
-
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-	  eval flag=\"$thread_safe_flag_spec\"
-	  linker_flags="$linker_flags $flag"
-	fi
-
-	# Make a backup of the uninstalled library when relinking
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
-	fi
-
-	# Do each of the archive commands.
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval cmds=\"$archive_expsym_cmds\"
-	else
-	  save_deplibs="$deplibs"
-	  for conv in $convenience; do
-	    tmp_deplibs=
-	    for test_deplib in $deplibs; do
-	      if test "$test_deplib" != "$conv"; then
-		tmp_deplibs="$tmp_deplibs $test_deplib"
-	      fi
-	    done
-	    deplibs="$tmp_deplibs"
-	  done
-	  eval cmds=\"$archive_cmds\"
-	  deplibs="$save_deplibs"
-	fi
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-
-	# Restore the uninstalled library and exit
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-	  exit 0
-	fi
-
-	# Create links to the real library.
-	for linkname in $linknames; do
-	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
-	  fi
-	done
-
-	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
-	  # On all known operating systems, these are identical.
-	  dlname="$soname"
-	fi
-      fi
-      ;;
-
-    obj)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-      fi
-
-      case $output in
-      *.lo)
-	if test -n "$objs$old_deplibs"; then
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit 1
-	fi
-	libobj="$output"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
-	;;
-      *)
-	libobj=
-	obj="$output"
-	;;
-      esac
-
-      # Delete the old objects.
-      $run $rm $obj $libobj
-
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec
-      wl=
-
-      if test -n "$convenience"; then
-	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
-	else
-	  gentop="$output_objdir/${obj}x"
-	  $show "${rm}r $gentop"
-	  $run ${rm}r "$gentop"
-	  $show "mkdir $gentop"
-	  $run mkdir "$gentop"
-	  status=$?
-	  if test $status -ne 0 && test ! -d "$gentop"; then
-	    exit $status
-	  fi
-	  generated="$generated $gentop"
-
-	  for xlib in $convenience; do
-	    # Extract the objects.
-	    case $xlib in
-	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	    *) xabs=`pwd`"/$xlib" ;;
-	    esac
-	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	    xdir="$gentop/$xlib"
-
-	    $show "${rm}r $xdir"
-	    $run ${rm}r "$xdir"
-	    $show "mkdir $xdir"
-	    $run mkdir "$xdir"
-	    status=$?
-	    if test $status -ne 0 && test ! -d "$xdir"; then
-	      exit $status
-	    fi
-	    $show "(cd $xdir && $AR x $xabs)"
-	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	    reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
-	  done
-	fi
-      fi
-
-      # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
-      output="$obj"
-      eval cmds=\"$reload_cmds\"
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	exit 0
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	# Create an invalid libtool object if no PIC, so that we don't
-	# accidentally link it into a program.
-	$show "echo timestamp > $libobj"
-	$run eval "echo timestamp > $libobj" || exit $?
-	exit 0
-      fi
-
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
-	# Only do commands if we really have different PIC objects.
-	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
-	eval cmds=\"$reload_cmds\"
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-      else
-	# Just create a symlink.
-	$show $rm $libobj
-	$run $rm $libobj
-	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
-	if test "X$xdir" = "X$libobj"; then
-	  xdir="."
-	else
-	  xdir="$xdir"
-	fi
-	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
-	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
-	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
-	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
-      fi
-
-      if test -n "$gentop"; then
-	$show "${rm}r $gentop"
-	$run ${rm}r $gentop
-      fi
-
-      exit 0
-      ;;
-
-    prog)
-      case $host in
-	*cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
-      esac
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-      fi
-
-      if test "$preload" = yes; then
-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
-	   test "$dlopen_self_static" = unknown; then
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi
-      fi
-
-      case $host in
-      *-*-rhapsody* | *-*-darwin1.[012])
-	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	case $host in
-	*darwin*)
-	  # Don't allow lazy linking, it breaks C++ global constructors
-	  compile_command="$compile_command ${wl}-bind_at_load"
-	  finalize_command="$finalize_command ${wl}-bind_at_load"
-	  ;;
-	esac
-	;;
-      esac
-
-      compile_command="$compile_command $compile_deplibs"
-      finalize_command="$finalize_command $finalize_deplibs"
-
-      if test -n "$rpath$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath $xrpath; do
-	  # This is the magic to use -rpath.
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-      fi
-
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) perm_rpath="$perm_rpath $libdir" ;;
-	  esac
-	fi
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  case :$dllsearchpath: in
-	  *":$libdir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$libdir";;
-	  esac
-	  ;;
-	esac
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
-
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$finalize_perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      dlsyms=
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	  dlsyms="${outputname}S.c"
-	else
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-	fi
-      fi
-
-      if test -n "$dlsyms"; then
-	case $dlsyms in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
-
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
-
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
-
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
-
-	    if test -n "$exclude_expsyms"; then
-	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    if test -n "$export_symbols_regex"; then
-	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$output.exp"
-	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-	    else
-	      $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-	    fi
-	  fi
-
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`echo "$arg" | ${SED} -e 's%^.*/%%'`
-	    $run eval 'echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-
-	    if test -n "$exclude_expsyms"; then
-	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
-
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" |
-		if sort -k 3 </dev/null >/dev/null 2>&1; then
-		  sort -k 3
-		else
-		  sort +2
-		fi |
-		uniq > "$nlist"S; then
-	      :
-	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
-	    fi
-
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-	    else
-	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	  fi
-
-	  pic_flag_for_symtable=
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DPIC";;
-	    esac
-	  esac
-
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Transform the symbol file into the correct name.
-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  ;;
-	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit 1
-	  ;;
-	esac
-      else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-      fi
-
-      if test $need_relink = no || test "$build_libtool_libs" != yes; then
-	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
-
-	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	status=$?
-
-	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
-	fi
-
-	exit $status
-      fi
-
-      if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case $dir in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
-      fi
-
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-	if test -n "$perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-	if test -n "$finalize_perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $finalize_perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-      fi
-
-      if test "$no_install" = yes; then
-	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
-	# Replace the output file specification.
-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	# Delete the old output file.
-	$run $rm $output
-	# Link the executable and exit
-	$show "$link_command"
-	$run eval "$link_command" || exit $?
-	exit 0
-      fi
-
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
-
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
-      # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-      $show "$link_command"
-      $run eval "$link_command" || exit $?
-
-      # Now create the wrapper script.
-      $show "creating $output"
-
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-	# Preserve any variables that may affect compiler behavior
-	for var in $variables_saved_for_relink; do
-	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	  elif eval var_value=\$$var; test -z "$var_value"; then
-	    relink_command="$var=; export $var; $relink_command"
-	  else
-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	  fi
-	done
-	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
-	case $0 in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
-	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
-	# win32 will think the script is a binary if it has
-	# a .exe suffix, so we strip it off here.
-	case $output in
-	  *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;;
-	esac
-	# test for cygwin because mv fails w/o .exe extensions
-	case $host in
-	  *cygwin*) exeext=.exe ;;
-	  *) exeext= ;;
-	esac
-	$rm $output
-	trap "$rm $output; exit 1" 1 2 15
-
-	$echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$echo >> $output "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  echo >> $output "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
-
-	  echo >> $output "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$echo \"\$relink_command_output\" >&2
-	$rm \"\$progdir/\$file\"
-	exit 1
-      fi
-    fi
-
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-	else
-	  echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	echo >> $output "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 ${SED}
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
-	$echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-	case $host in
-	# win32 systems need to use the prog path for dll
-	# lookup to work
-	*-*-cygwin* | *-*-pw32*)
-	  $echo >> $output "\
-      exec \$progdir/\$program \${1+\"\$@\"}
-"
-	  ;;
-
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
-	  $echo >> $output "\
-      exec \$progdir\\\\\$program \${1+\"\$@\"}
-"
-	  ;;
-
-	*)
-	  $echo >> $output "\
-      # Export the path to the program.
-      PATH=\"\$progdir:\$PATH\"
-      export PATH
-
-      exec \$program \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
-  fi
-fi\
-"
-	chmod +x $output
-      fi
-      exit 0
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
-
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
-	  build_libtool_libs=no
-	else
-	  oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
-	fi
-	addlibs="$old_convenience"
-      fi
-
-      if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
-	$show "${rm}r $gentop"
-	$run ${rm}r "$gentop"
-	$show "mkdir $gentop"
-	$run mkdir "$gentop"
-	status=$?
-	if test $status -ne 0 && test ! -d "$gentop"; then
-	  exit $status
-	fi
-	generated="$generated $gentop"
-
-	# Add in members from convenience archives.
-	for xlib in $addlibs; do
-	  # Extract the objects.
-	  case $xlib in
-	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	  *) xabs=`pwd`"/$xlib" ;;
-	  esac
-	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	  xdir="$gentop/$xlib"
-
-	  $show "${rm}r $xdir"
-	  $run ${rm}r "$xdir"
-	  $show "mkdir $xdir"
-	  $run mkdir "$xdir"
-	  status=$?
-	  if test $status -ne 0 && test ! -d "$xdir"; then
-	    exit $status
-	  fi
-	  $show "(cd $xdir && $AR x $xabs)"
-	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-
-	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-	done
-      fi
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-	eval cmds=\"$old_archive_from_new_cmds\"
-      else
-	# Ensure that we have .o objects in place in case we decided
-	# not to build a shared library, and have fallen back to building
-	# static libs even though --disable-static was passed!
-	for oldobj in $oldobjs; do
-	  if test ! -f $oldobj; then
-	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$oldobj"; then
-	      xdir="."
-	    else
-	      xdir="$xdir"
-	    fi
-	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
-	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
-	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
-	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
-	  fi
-	done
-
-	eval cmds=\"$old_archive_cmds\"
-      fi
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$generated"; then
-      $show "${rm}r$generated"
-      $run ${rm}r$generated
-    fi
-
-    # Now create the libtool archive.
-    case $output in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
-
-      # Preserve any variables that may affect compiler behavior
-      for var in $variables_saved_for_relink; do
-	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	elif eval var_value=\$$var; test -z "$var_value"; then
-	  relink_command="$var=; export $var; $relink_command"
-	else
-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	fi
-      done
-      # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-
-      # Only create the output if not a dry run.
-      if test -z "$run"; then
-	for installed in no yes; do
-	  if test "$installed" = yes; then
-	    if test -z "$install_libdir"; then
-	      break
-	    fi
-	    output="$output_objdir/$outputname"i
-	    # Replace all uninstalled libtool libraries with the installed ones
-	    newdependency_libs=
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      *.la)
-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		if test -z "$libdir"; then
-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit 1
-		fi
-		newdependency_libs="$newdependency_libs $libdir/$name"
-		;;
-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
-	      esac
-	    done
-	    dependency_libs="$newdependency_libs"
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit 1
-	      fi
-	      newdlfiles="$newdlfiles $libdir/$name"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit 1
-	      fi
-	      newdlprefiles="$newdlprefiles $libdir/$name"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  fi
-	  $rm $output
-	  # place dlname in correct position for cygwin
-	  tdlname=$dlname
-	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-	  esac
-	  $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
-	  if test "$installed" = no && test $need_relink = yes; then
-	    $echo >> $output "\
-relink_command=\"$relink_command\""
-	  fi
-	done
-      fi
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
-      ;;
-    esac
-    exit 0
-    ;;
-
-  # libtool install mode
-  install)
-    modename="$modename: install"
-
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg="$nonopt"
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest="$arg"
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f) prev="-f" ;;
-      -g) prev="-g" ;;
-      -m) prev="-m" ;;
-      -o) prev="-o" ;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*) ;;
-
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest="$arg"
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
-
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-      else
-	$echo "$modename: you must specify a destination" 1>&2
-      fi
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test $# -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit 1
-      fi
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	library_names=
-	old_library=
-	relink_command=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
-
-	if test -n "$relink_command"; then
-          # Determine the prefix the user has applied to our future dir.
-          inst_prefix_dir=`$echo "$destdir" | sed "s%$libdir\$%%"`
- 
-          # Don't allow the user to place us outside of our expected
-          # location b/c this prevents finding dependent libraries that
-          # are installed to the same prefix.
-          if test "$inst_prefix_dir" = "$destdir"; then
-            $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-            exit 1
-          fi
- 
-          if test -n "$inst_prefix_dir"; then
-            # Stick the inst_prefix_dir data into the link command.
-            relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-          else
-            relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%%"`
-          fi
-
-	  $echo "$modename: warning: relinking \`$file'" 1>&2
-	  $show "$relink_command"
-	  if $run eval "$relink_command"; then :
-	  else
-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    exit 1
-	  fi
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$srcname $destdir/$realname"
-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-	  if test -n "$stripme" && test -n "$striplib"; then
-	    $show "$striplib $destdir/$realname"
-	    $run eval "$striplib $destdir/$realname" || exit $?
-	  fi
-
-	  if test $# -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-	      fi
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  eval cmds=\"$postinstall_cmds\"
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
-	fi
-
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
-	fi
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
-	exit 0
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin*|*mingw*)
-	    wrapper=`echo $file | ${SED} -e 's,.exe$,,'`
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $wrapper ;;
-	  *) . ./$wrapper ;;
-	  esac
-
-	  # Check the variables that should have been set.
-	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit 1
-	  fi
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case $lib in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $wrapper ;;
-	  *) . ./$wrapper ;;
-	  esac
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir="/tmp"
-	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
-	      tmpdir="$tmpdir/libtool-$$"
-	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
-	      else
-		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-		continue
-	      fi
-	      file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyways
-	case $install_prog,$host in
-	/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    destfile=`echo $destfile | ${SED} -e 's,.exe$,,'`
-	    ;;
-	  esac
-	  ;;
-	esac
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
-
-      if test -n "$stripme" && test -n "$striplib"; then
-	$show "$old_striplib $oldlib"
-	$run eval "$old_striplib $oldlib" || exit $?
-      fi
-
-      # Do each command in the postinstall commands.
-      eval cmds=\"$old_postinstall_cmds\"
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $0 --finish$current_libdirs'
-    else
-      exit 0
-    fi
-    ;;
-
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  eval cmds=\"$finish_cmds\"
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-       $cmd"
-	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    test "$show" = ":" && exit 0
-
-    echo "----------------------------------------------------------------------"
-    echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      echo "   $libdir"
-    done
-    echo
-    echo "If you ever happen to want to link against installed libraries"
-    echo "in a given directory, LIBDIR, you must either use libtool, and"
-    echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    echo
-    echo "See any operating system documentation about shared libraries for"
-    echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    echo "----------------------------------------------------------------------"
-    exit 0
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
-
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit 1
-    fi
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit 1
-      fi
-
-      dir=
-      case $file in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit 1
-	fi
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit 1
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
-
-    if test -z "$run"; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
-
-      # Restore saved enviroment variables
-      if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-      fi
-      if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-      fi
-
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-	$echo "export $shlibpath_var"
-      fi
-      $echo "$cmd$args"
-      exit 0
-    fi
-    ;;
-
-  # libtool clean and uninstall mode
-  clean | uninstall)
-    modename="$modename: $mode"
-    rm="$nonopt"
-    files=
-    rmforce=
-    exit_status=0
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    for arg
-    do
-      case $arg in
-      -f) rm="$rm $arg"; rmforce=yes ;;
-      -*) rm="$rm $arg" ;;
-      *) files="$files $arg" ;;
-      esac
-    done
-
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    rmdirs=
-
-    for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$dir" = "X$file"; then
-	dir=.
-	objdir="$objdir"
-      else
-	objdir="$dir/$objdir"
-      fi
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-      test $mode = uninstall && objdir="$dir"
-
-      # Remember objdir for removal later, being careful to avoid duplicates
-      if test $mode = clean; then
-	case " $rmdirs " in
-	  *" $objdir "*) ;;
-	  *) rmdirs="$rmdirs $objdir" ;;
-	esac
-      fi
-
-      # Don't error if the file doesn't exist and rm -f was used.
-      if (test -L "$file") >/dev/null 2>&1 \
-	|| (test -h "$file") >/dev/null 2>&1 \
-	|| test -f "$file"; then
-	:
-      elif test -d "$file"; then
-	exit_status=1
-	continue
-      elif test "$rmforce" = yes; then
-	continue
-      fi
-
-      rmfiles="$file"
-
-      case $name in
-      *.la)
-	# Possibly a libtool archive, so verify it.
-	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  . $dir/$name
-
-	  # Delete the libtool libraries and symlinks.
-	  for n in $library_names; do
-	    rmfiles="$rmfiles $objdir/$n"
-	  done
-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-	  test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-
-	  if test $mode = uninstall; then
-	    if test -n "$library_names"; then
-	      # Do each command in the postuninstall commands.
-	      eval cmds=\"$postuninstall_cmds\"
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test $? != 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    if test -n "$old_library"; then
-	      # Do each command in the old_postuninstall commands.
-	      eval cmds=\"$old_postuninstall_cmds\"
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test $? != 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # FIXME: should reinstall the best remaining shared library.
-	  fi
-	fi
-	;;
-
-      *.lo)
-	if test "$build_old_libs" = yes; then
-	  oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
-	  rmfiles="$rmfiles $dir/$oldobj"
-	fi
-	;;
-
-      *)
-	# Do a test to see if this is a libtool program.
-	if test $mode = clean &&
-	   (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  relink_command=
-	  . $dir/$file
-
-	  rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-	  if test "$fast_install" = yes && test -n "$relink_command"; then
-	    rmfiles="$rmfiles $objdir/lt-$name"
-	  fi
-	fi
-	;;
-      esac
-      $show "$rm $rmfiles"
-      $run $rm $rmfiles || exit_status=1
-    done
-
-    # Try to remove the ${objdir}s in the directories where we deleted files
-    for dir in $rmdirs; do
-      if test -d "$dir"; then
-	$show "rmdir $dir"
-	$run rmdir $dir >/dev/null 2>&1
-      fi
-    done
-
-    exit $exit_status
-    ;;
-
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit 1
-    ;;
-  esac
-
-  if test -z "$exec_cmd"; then
-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
-    $echo "$generic_help" 1>&2
-    exit 1
-  fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
-  eval exec $exec_cmd
-  exit 1
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
-    --config          show all configuration variables
-    --debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
-    --features        display basic configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --version         print version information
-
-MODE must be one of the following:
-
-      clean           remove files from the build directory
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE."
-  exit 0
-  ;;
-
-clean)
-  $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -static           always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit 1
-  ;;
-esac
-
-echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit 0
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
diff --git a/m4/ChangeLog b/m4/ChangeLog
index ecc4b5f..2523add 100644
--- a/m4/ChangeLog
+++ b/m4/ChangeLog
@@ -1,3 +1,7 @@
+2003-12-08  Werner Koch  <wk@gnupg.org>
+
+	* libtool.m4: Added (CVS only).
+
 2003-12-08  gettextize  <bug-gnu-gettext@gnu.org>
 
 	* gettext.m4: Upgrade to gettext-0.12.1.
diff --git a/m4/libtool.m4 b/m4/libtool.m4
new file mode 100644
index 0000000..9c10f0b
--- /dev/null
+++ b/m4/libtool.m4
@@ -0,0 +1,3717 @@
+# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
+## Copyright 1996, 1997, 1998, 1999, 2000, 2001
+## Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 46 AC_PROG_LIBTOOL
+
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Prevent multiple expansion
+define([AC_PROG_LIBTOOL], [])
+])
+
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+
+_LT_AC_PROG_ECHO_BACKSLASH
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    AC_PATH_MAGIC
+  fi
+  ;;
+esac
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+enable_win32_dll=yes, enable_win32_dll=no)
+
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_SAVE
+     AC_LANG_C
+     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_RESTORE])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+
+  # recent cygwin and mingw systems supply a stub DllMain which the user
+  # can override, but on older systems we have to supply one
+  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
+    [AC_TRY_LINK([],
+      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
+      DllMain (0, 0, 0);],
+      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
+
+  case $host/$CC in
+  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
+    # old mingw systems require "-dll" to link a DLL, while more recent ones
+    # require "-mdll"
+    SAVE_CFLAGS="$CFLAGS"
+    CFLAGS="$CFLAGS -mdll"
+    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
+      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
+    CFLAGS="$SAVE_CFLAGS" ;;
+  *-*-cygwin* | *-*-pw32*)
+    # cygwin systems need to pass --dll to the linker, and not link
+    # crt.o which will require a WinMain@16 definition.
+    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
+  esac
+  ;;
+  ])
+esac
+
+_LT_AC_LTCONFIG_HACK
+
+])
+
+# AC_LIBTOOL_HEADER_ASSERT
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
+[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
+    [lt_cv_func_assert_works],
+    [case $host in
+    *-*-solaris*)
+      if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
+        case `$CC --version 2>/dev/null` in
+        [[12]].*) lt_cv_func_assert_works=no ;;
+        *)        lt_cv_func_assert_works=yes ;;
+        esac
+      fi
+      ;;
+    esac])
+
+if test "x$lt_cv_func_assert_works" = xyes; then
+  AC_CHECK_HEADERS(assert.h)
+fi
+])# AC_LIBTOOL_HEADER_ASSERT
+
+# _LT_AC_CHECK_DLFCN
+# --------------------
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
+[AC_CHECK_HEADERS(dlfcn.h)
+])# _LT_AC_CHECK_DLFCN
+
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_NM])
+AC_REQUIRE([AC_OBJEXT])
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris* | sysv5*)
+  symcode='[[BDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $host_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+  symcode='[[ABCDGISTW]]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Write the raw and C identifiers.
+lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr address;
+}
+lt_preloaded_symbols[[]] =
+{
+EOF
+	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  save_LIBS="$LIBS"
+	  save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$no_builtin_flag"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$save_LIBS"
+	  CFLAGS="$save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AC_FD_CC
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AC_FD_CC
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
+    fi
+  else
+    echo "$progname: failed program was:" >&AC_FD_CC
+    cat conftest.$ac_ext >&5
+  fi
+  rm -f conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  global_symbol_to_cdecl=
+  global_symbol_to_c_name_address=
+else
+  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
+  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
+fi
+if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
+then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+
+# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
+# ---------------------------------
+AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR],
+[# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) lt_cv_sys_path_separator=';' ;;
+    *)     lt_cv_sys_path_separator=':' ;;
+  esac
+  PATH_SEPARATOR=$lt_cv_sys_path_separator
+fi
+])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
+
+# _LT_AC_PROG_ECHO_BACKSLASH
+# --------------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+			      [AC_DIVERT_PUSH(NOTICE)])
+_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X[$]1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+
+if test "X[$]1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+       echo_test_string="`eval $cmd`" &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "[$]0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(ECHO)
+AC_DIVERT_POP
+])# _LT_AC_PROG_ECHO_BACKSLASH
+
+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ------------------------------------------------------------------
+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+[if test "$cross_compiling" = yes; then :
+  [$4]
+else
+  AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+
+    exit (status);
+}]
+EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_unknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_AC_TRY_DLOPEN_SELF
+
+# AC_LIBTOOL_DLOPEN_SELF
+# -------------------
+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+[if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+          [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+            [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+	        [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+	          [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+	            [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+	    ])
+	  ])
+	])
+      ])
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      LDFLAGS="$LDFLAGS $link_static_flag"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+    	  lt_cv_dlopen_self_static, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+])# AC_LIBTOOL_DLOPEN_SELF
+
+AC_DEFUN([_LT_AC_LTCONFIG_HACK],
+[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+need_locks="$enable_libtool_lock"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+if test x"$host" != x"$build"; then
+  ac_tool_prefix=${host_alias}-
+else
+  ac_tool_prefix=
+fi
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case $host_os in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+    ;;
+  *)
+    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="[$]2"
+
+## FIXME: this should be a separate macro
+##
+AC_MSG_CHECKING([for objdir])
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+AC_MSG_RESULT($objdir)
+##
+## END FIXME
+
+
+## FIXME: this should be a separate macro
+##
+AC_ARG_WITH(pic,
+[  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
+pic_mode="$withval", pic_mode=default)
+test -z "$pic_mode" && pic_mode=default
+
+# We assume here that the value for lt_cv_prog_cc_pic will not be cached
+# in isolation, and that seeing it set (from the cache) indicates that
+# the associated values are set (in the cache) correctly too.
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+AC_CACHE_VAL(lt_cv_prog_cc_pic,
+[ lt_cv_prog_cc_pic=
+  lt_cv_prog_cc_shlib=
+  lt_cv_prog_cc_wl=
+  lt_cv_prog_cc_static=
+  lt_cv_prog_cc_no_builtin=
+  lt_cv_prog_cc_can_build_shared=$can_build_shared
+
+  if test "$GCC" = yes; then
+    lt_cv_prog_cc_wl='-Wl,'
+    lt_cv_prog_cc_static='-static'
+
+    case $host_os in
+    aix*)
+      # Below there is a dirty hack to force normal static linking with -ldl
+      # The problem is because libdl dynamically linked with both libc and
+      # libC (AIX C++ library), which obviously doesn't included in libraries
+      # list by gcc. This cause undefined symbols with -static flags.
+      # This hack allows C programs to be linked with "-static -ldl", but
+      # not sure about C++ programs.
+      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_cv_prog_cc_pic='-fno-common'
+      ;;
+    cygwin* | mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_cv_prog_cc_pic='-DDLL_EXPORT'
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	 lt_cv_prog_cc_pic=-Kconform_pic
+      fi
+      ;;
+    *)
+      lt_cv_prog_cc_pic='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for PIC flags for the system compiler.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      lt_cv_prog_cc_wl='-Wl,'
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_cv_prog_cc_static='-Bstatic'
+      else
+	lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
+      lt_cv_prog_cc_wl='-Wl,'
+      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
+      lt_cv_prog_cc_pic='+Z'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_cv_prog_cc_wl='-Wl,'
+      lt_cv_prog_cc_static='-non_shared'
+      # PIC (with -KPIC) is the default.
+      ;;
+
+    cygwin* | mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_cv_prog_cc_pic='-DDLL_EXPORT'
+      ;;
+
+    newsos6)
+      lt_cv_prog_cc_pic='-KPIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      # All OSF/1 code is PIC.
+      lt_cv_prog_cc_wl='-Wl,'
+      lt_cv_prog_cc_static='-non_shared'
+      ;;
+
+    sco3.2v5*)
+      lt_cv_prog_cc_pic='-Kpic'
+      lt_cv_prog_cc_static='-dn'
+      lt_cv_prog_cc_shlib='-belf'
+      ;;
+
+    solaris*)
+      lt_cv_prog_cc_pic='-KPIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      lt_cv_prog_cc_wl='-Wl,'
+      ;;
+
+    sunos4*)
+      lt_cv_prog_cc_pic='-PIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      lt_cv_prog_cc_wl='-Qoption ld '
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+      lt_cv_prog_cc_pic='-KPIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      lt_cv_prog_cc_wl='-Wl,'
+      ;;
+
+    uts4*)
+      lt_cv_prog_cc_pic='-pic'
+      lt_cv_prog_cc_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_cv_prog_cc_pic='-Kconform_pic'
+	lt_cv_prog_cc_static='-Bstatic'
+      fi
+      ;;
+
+    *)
+      lt_cv_prog_cc_can_build_shared=no
+      ;;
+    esac
+  fi
+])
+if test -z "$lt_cv_prog_cc_pic"; then
+  AC_MSG_RESULT([none])
+else
+  AC_MSG_RESULT([$lt_cv_prog_cc_pic])
+
+  # Check to make sure the pic_flag actually works.
+  AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works])
+  AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl
+    save_CFLAGS="$CFLAGS"
+    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
+    AC_TRY_COMPILE([], [], [dnl
+      case $host_os in
+      hpux9* | hpux10* | hpux11*)
+	# On HP-UX, both CC and GCC only warn that PIC is supported... then
+	# they create non-PIC objects.  So, if there were any warnings, we
+	# assume that PIC is not supported.
+	if test -s conftest.err; then
+	  lt_cv_prog_cc_pic_works=no
+	else
+	  lt_cv_prog_cc_pic_works=yes
+	fi
+	;;
+      *)
+	lt_cv_prog_cc_pic_works=yes
+	;;
+      esac
+    ], [dnl
+      lt_cv_prog_cc_pic_works=no
+    ])
+    CFLAGS="$save_CFLAGS"
+  ])
+
+  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
+    lt_cv_prog_cc_pic=
+    lt_cv_prog_cc_can_build_shared=no
+  else
+    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
+  fi
+
+  AC_MSG_RESULT([$lt_cv_prog_cc_pic_works])
+fi
+##
+## END FIXME
+
+# Check for any special shared library compilation flags.
+if test -n "$lt_cv_prog_cc_shlib"; then
+  AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
+  if echo "$old_CC $old_CFLAGS " | egrep -e "[[ 	]]$lt_cv_prog_cc_shlib[[ 	]]" >/dev/null; then :
+  else
+   AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
+    lt_cv_prog_cc_can_build_shared=no
+  fi
+fi
+
+## FIXME: this should be a separate macro
+##
+AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works])
+AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl
+  lt_cv_prog_cc_static_works=no
+  save_LDFLAGS="$LDFLAGS"
+  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
+  AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes])
+  LDFLAGS="$save_LDFLAGS"
+])
+
+# Belt *and* braces to stop my trousers falling down:
+test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
+AC_MSG_RESULT([$lt_cv_prog_cc_static_works])
+
+pic_flag="$lt_cv_prog_cc_pic"
+special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
+wl="$lt_cv_prog_cc_wl"
+link_static_flag="$lt_cv_prog_cc_static"
+no_builtin_flag="$lt_cv_prog_cc_no_builtin"
+can_build_shared="$lt_cv_prog_cc_can_build_shared"
+##
+## END FIXME
+
+
+## FIXME: this should be a separate macro
+##
+# Check to see if options -o and -c are simultaneously supported by compiler
+AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext])
+AC_CACHE_VAL([lt_cv_compiler_c_o], [
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+echo "int some_variable = 0;" > conftest.$ac_ext
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory.  Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
+save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
+compiler_c_o=no
+if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+  # The compiler can only warn and ignore the option if not recognized
+  # So say no if there are warnings
+  if test -s out/conftest.err; then
+    lt_cv_compiler_c_o=no
+  else
+    lt_cv_compiler_c_o=yes
+  fi
+else
+  # Append any errors to the config.log.
+  cat out/conftest.err 1>&AC_FD_CC
+  lt_cv_compiler_c_o=no
+fi
+CFLAGS="$save_CFLAGS"
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
+])
+compiler_c_o=$lt_cv_compiler_c_o
+AC_MSG_RESULT([$compiler_c_o])
+
+if test x"$compiler_c_o" = x"yes"; then
+  # Check to see if we can write to a .lo
+  AC_MSG_CHECKING([if $compiler supports -c -o file.lo])
+  AC_CACHE_VAL([lt_cv_compiler_o_lo], [
+  lt_cv_compiler_o_lo=no
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -c -o conftest.lo"
+  save_objext="$ac_objext"
+  ac_objext=lo
+  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+    if test -s conftest.err; then
+      lt_cv_compiler_o_lo=no
+    else
+      lt_cv_compiler_o_lo=yes
+    fi
+  ])
+  ac_objext="$save_objext"
+  CFLAGS="$save_CFLAGS"
+  ])
+  compiler_o_lo=$lt_cv_compiler_o_lo
+  AC_MSG_RESULT([$compiler_o_lo])
+else
+  compiler_o_lo=no
+fi
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+if test "$GCC" = yes; then
+  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+  AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions])
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
+  compiler_rtti_exceptions=no
+  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+    if test -s conftest.err; then
+      compiler_rtti_exceptions=no
+    else
+      compiler_rtti_exceptions=yes
+    fi
+  ])
+  CFLAGS="$save_CFLAGS"
+  AC_MSG_RESULT([$compiler_rtti_exceptions])
+
+  if test "$compiler_rtti_exceptions" = "yes"; then
+    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+  else
+    no_builtin_flag=' -fno-builtin'
+  fi
+fi
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# See if the linker supports building shared libraries.
+AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries])
+
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+old_archive_from_expsyms_cmds=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_into_libs=no
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+link_all_deplibs=unknown
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced.  Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+extract_expsyms_cmds=
+
+case $host_os in
+cygwin* | mingw* | pw32*)
+  # FIXME: the MSVC++ port hasn't been tested in a loooong time
+  # When not using gcc, we currently assume that we are using
+  # Microsoft Visual C++.
+  if test "$GCC" != yes; then
+    with_gnu_ld=no
+  fi
+  ;;
+openbsd*)
+  with_gnu_ld=no
+  ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # If archive_cmds runs LD, not CC, wlarc should be empty
+  wlarc='${wl}'
+
+  # See if GNU ld supports shared libraries.
+  case $host_os in
+  aix3* | aix4* | aix5*)
+    # On AIX, the GNU linker is very broken
+    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
+    ld_shlibs=no
+    cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+
+    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+    # that the semantics of dynamic libraries on AmigaOS, at least up
+    # to version 4, is to share data among multiple programs linked
+    # with the same dynamic library.  Since this doesn't match the
+    # behavior of shared libraries on other platforms, we can use
+    # them.
+    ld_shlibs=no
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec='-L$libdir'
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+
+    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
+      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
+      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
+      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
+      else $CC -o impgen impgen.c ; fi)~
+      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
+
+    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
+
+    # cygwin and mingw dlls have different entry points and sets of symbols
+    # to exclude.
+    # FIXME: what about values for MSVC?
+    dll_entry=__cygwin_dll_entry@12
+    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
+    case $host_os in
+    mingw*)
+      # mingw values
+      dll_entry=_DllMainCRTStartup@12
+      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
+      ;;
+    esac
+
+    # mingw and cygwin differ, and it's simplest to just exclude the union
+    # of the two symbol sets.
+    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
+
+    # recent cygwin and mingw systems supply a stub DllMain which the user
+    # can override, but on older systems we have to supply one (in ltdll.c)
+    if test "x$lt_cv_need_dllmain" = "xyes"; then
+      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
+      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
+	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
+    else
+      ltdll_obj=
+      ltdll_cmds=
+    fi
+
+    # Extract the symbol export list from an `--export-all' def file,
+    # then regenerate the def file from the symbol export list, so that
+    # the compiled dll only exports the symbol export list.
+    # Be careful not to strip the DATA tag left be newer dlltools.
+    export_symbols_cmds="$ltdll_cmds"'
+      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
+      sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
+
+    # If the export-symbols file already is a .def file (1st line
+    # is EXPORTS), use it as is.
+    # If DATA tags from a recent dlltool are present, honour them!
+    archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname-def;
+      else
+	echo EXPORTS > $output_objdir/$soname-def;
+	_lt_hint=1;
+	cat $export_symbols | while read symbol; do
+	 set dummy \$symbol;
+	 case \[$]# in
+	   2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+	   4) echo "   \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
+	   *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
+	 esac;
+	 _lt_hint=`expr 1 + \$_lt_hint`;
+	done;
+      fi~
+      '"$ltdll_cmds"'
+      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
+      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
+      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+      wlarc=
+    else
+      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    fi
+    ;;
+
+  solaris* | sysv5*)
+    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+      ld_shlibs=no
+      cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    wlarc=
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+  esac
+
+  if test "$ld_shlibs" = yes; then
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    case $host_os in
+    cygwin* | mingw* | pw32*)
+      # dlltool doesn't understand --whole-archive et. al.
+      whole_archive_flag_spec=
+      ;;
+    *)
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+	whole_archive_flag_spec=
+      fi
+      ;;
+    esac
+  fi
+else
+  # PORTME fill in a description of your system's linker (not GNU ld)
+  case $host_os in
+  aix3*)
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+    # Note: this linker hardcodes the directories in LIBPATH if there
+    # are no directories specified by -L.
+    hardcode_minus_L=yes
+    if test "$GCC" = yes && test -z "$link_static_flag"; then
+      # Neither direct hardcoding nor static linking is supported with a
+      # broken collect2.
+      hardcode_direct=unsupported
+    fi
+    ;;
+
+  aix4* | aix5*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	for ld_flag in $LDFLAGS; do
+	  case $ld_flag in
+	  *-brtl*)
+	    aix_use_runtimelinking=yes
+	    break
+	  ;;
+	  esac
+	done
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    hardcode_direct=yes
+    archive_cmds=''
+    hardcode_libdir_separator=':'
+    if test "$GCC" = yes; then
+      case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	  strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  hardcode_direct=yes
+	else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	fi
+      esac
+
+      shared_flag='-shared'
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+	shared_flag='${wl}-G'
+      else
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
+      fi
+    fi
+
+    # It seems that -bexpall can do strange things, so it is better to
+    # generate a list of symbols to export.
+    always_export_symbols=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      allow_undefined_flag='-berok'
+      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+    else
+      if test "$host_cpu" = ia64; then
+	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	allow_undefined_flag="-z nodefs"
+	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+      else
+	hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='${wl}-berok'
+	# This is a bit strange, but is similar to how AIX traditionally builds
+	# it's shared libraries.
+	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    # see comment about different semantics on the GNU ld section
+    ld_shlibs=no
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec=' '
+    allow_undefined_flag=unsupported
+    # Tell ltmain to make .lib files, not .a files.
+    libext=lib
+    # FIXME: Setting linknames here is a bad hack.
+    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+    # The linker will automatically build a .lib file if we build a DLL.
+    old_archive_from_new_cmds='true'
+    # FIXME: Should let the user specify the lib program.
+    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+    fix_srcfile_path='`cygpath -w "$srcfile"`'
+    ;;
+
+  darwin* | rhapsody*)
+    case "$host_os" in
+    rhapsody* | darwin1.[[012]])
+      allow_undefined_flag='-undefined suppress'
+      ;;
+    *) # Darwin 1.3 on
+      allow_undefined_flag='-flat_namespace -undefined suppress'
+      ;;
+    esac
+    # FIXME: Relying on posixy $() will cause problems for
+    #        cross-compilation, but unfortunately the echo tests do not
+    #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
+    #	     `"' quotes if we put them in here... so don't!
+    archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
+    # We need to add '_' to the symbols in $export_symbols first
+    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    whole_archive_flag_spec='-all_load $convenience'
+    ;;
+
+  freebsd1*)
+    ld_shlibs=no
+    ;;
+
+  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+  # support.  Future versions do this automatically, but an explicit c++rt0.o
+  # does not break anything, and helps significantly (at the cost of a little
+  # extra space).
+  freebsd2.2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+  freebsd2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+  freebsd*)
+    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    case $host_os in
+    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
+    esac
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_direct=yes
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+			 # location of the library.
+    export_dynamic_flag_spec='${wl}-E'
+    ;;
+
+  irix5* | irix6* | nonstopux*)
+    if test "$GCC" = yes; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    else
+      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      hardcode_libdir_flag_spec='-rpath $libdir'
+    fi
+    hardcode_libdir_separator=:
+    link_all_deplibs=yes
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+    else
+      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+    fi
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  newsos6)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_shlibpath_var=no
+    ;;
+
+  openbsd*)
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+    else
+      case "$host_os" in
+      openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_libdir_flag_spec='-R$libdir'
+        ;;
+      *)
+        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+        ;;
+      esac
+    fi
+    ;;
+
+  os2*)
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    allow_undefined_flag=unsupported
+    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+    ;;
+
+  osf3*)
+    if test "$GCC" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  osf4* | osf5*)	# as osf3* with the addition of -msym flag
+    if test "$GCC" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+
+      #Both c and cxx compiler support -rpath directly
+      hardcode_libdir_flag_spec='-rpath $libdir'
+    fi
+    hardcode_libdir_separator=:
+    ;;
+
+  sco3.2v5*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_shlibpath_var=no
+    runpath_var=LD_RUN_PATH
+    hardcode_runpath_var=yes
+    export_dynamic_flag_spec='${wl}-Bexport'
+    ;;
+
+  solaris*)
+    # gcc --version < 3.0 without binutils cannot create self contained
+    # shared libraries reliably, requiring libgcc.a to resolve some of
+    # the object symbols generated in some cases.  Libraries that use
+    # assert need libgcc.a to resolve __eprintf, for example.  Linking
+    # a copy of libgcc.a into every shared library to guarantee resolving
+    # such symbols causes other problems:  According to Tim Van Holder
+    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
+    # (to the application) exception stack for one thing.
+    no_undefined_flag=' -z defs'
+    if test "$GCC" = yes; then
+      case `$CC --version 2>/dev/null` in
+      [[12]].*)
+	cat <<EOF 1>&2
+
+*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
+*** create self contained shared libraries on Solaris systems, without
+*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
+*** -no-undefined support, which will at least allow you to build shared
+*** libraries.  However, you may find that when you link such libraries
+*** into an application without using GCC, you have to manually add
+*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
+*** upgrade to a newer version of GCC.  Another option is to rebuild your
+*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
+
+EOF
+        no_undefined_flag=
+	;;
+      esac
+    fi
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_shlibpath_var=no
+    case $host_os in
+    solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+    esac
+    link_all_deplibs=yes
+    ;;
+
+  sunos4*)
+    if test "x$host_vendor" = xsequent; then
+      # Use $CC to link under sequent, because it throws in some extra .o
+      # files that make .init and .fini sections work.
+      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+    else
+      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+    fi
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4)
+    case $host_vendor in
+      sni)
+        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+        hardcode_direct=yes # is this really true???
+        ;;
+      siemens)
+        ## LD is ld it makes a PLAMLIB
+        ## CC just makes a GrossModule.
+        archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+        reload_cmds='$CC -r -o $output$reload_objs'
+        hardcode_direct=no
+        ;;
+      motorola)
+        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+        hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+        ;;
+    esac
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4.3*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_shlibpath_var=no
+    export_dynamic_flag_spec='-Bexport'
+    ;;
+
+  sysv5*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+    hardcode_libdir_flag_spec=
+    hardcode_shlibpath_var=no
+    runpath_var='LD_RUN_PATH'
+    ;;
+
+  uts4*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  dgux*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4*MP*)
+    if test -d /usr/nec; then
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ld_shlibs=yes
+    fi
+    ;;
+
+  sysv4.2uw2*)
+    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    hardcode_runpath_var=yes
+    runpath_var=LD_RUN_PATH
+    ;;
+
+  sysv5uw7* | unixware7*)
+    no_undefined_flag='${wl}-z ${wl}text'
+    if test "$GCC" = yes; then
+      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+    else
+      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+    fi
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    ld_shlibs=no
+    ;;
+  esac
+fi
+AC_MSG_RESULT([$ld_shlibs])
+test "$ld_shlibs" = no && can_build_shared=no
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# Check hardcoding attributes.
+AC_MSG_CHECKING([how to hardcode library paths into programs])
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var"; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$hardcode_shlibpath_var" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+AC_MSG_RESULT([$hardcode_action])
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+  AC_MSG_RESULT([no])
+fi
+##
+## END FIXME
+
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+## FIXME: this should be a separate macro
+##
+# PORTME Fill in your ld.so characteristics
+AC_MSG_CHECKING([dynamic linker characteristics])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}.so$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	     echo ' yes '
+	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	  :
+	else
+	  can_build_shared=no
+	fi
+	;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can
+    # not hardcode correct soname into executable. Probably we can
+    # add versioning support to collect2, so additional links can
+    # be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}.so$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  hardcode_into_libs=yes
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}.so'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi4*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  export_dynamic_flag_spec=-rdynamic
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  need_version=no
+  need_lib_prefix=no
+  case $GCC,$host_os in
+  yes,cygwin*)
+    library_names_spec='$libname.dll.a'
+    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
+    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog .libs/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    ;;
+  yes,mingw*)
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
+    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
+    ;;
+  yes,pw32*)
+    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+    ;;
+  *)
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  # FIXME: Relying on posixy $() will cause problems for
+  #        cross-compilation, but unfortunately the echo tests do not
+  #        yet detect zsh echo's removal of \ escapes.
+  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
+  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+freebsd*-gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU/FreeBSD ld.so'
+  ;;
+
+freebsd*)
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  *)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  dynamic_linker="$host_os dld.sl"
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  shlibpath_var=SHLIB_PATH
+  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+  soname_spec='${libname}${release}.sl$major'
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)          version_type=irix ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+    soname_spec='${libname}${release}.so$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case "$host_os" in
+    openbsd2.[[89]] | openbsd2.[[89]].*)
+      shlibpath_overrides_runpath=no
+      ;;
+    *)
+      shlibpath_overrides_runpath=yes
+      ;;
+    esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+os2*)
+  libname_spec='$name'
+  need_lib_prefix=no
+  library_names_spec='$libname.dll $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_version=no
+  need_lib_prefix=no
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  hardcode_into_libs=yes
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+    soname_spec='$libname.so.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# Report the final consequences.
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+##
+## END FIXME
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+AC_LIBTOOL_DLOPEN_SELF
+
+## FIXME: this should be a separate macro
+##
+if test "$enable_shared" = yes && test "$GCC" = yes; then
+  case $archive_cmds in
+  *'~'*)
+    # FIXME: we may have to deal with multi-command sequences.
+    ;;
+  '$CC '*)
+    # Test whether the compiler implicitly links with -lc since on some
+    # systems, -lgcc has to come before -lc. If gcc already passes -lc
+    # to ld, don't add -lc before -lgcc.
+    AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+    AC_CACHE_VAL([lt_cv_archive_cmds_need_lc],
+    [$rm conftest*
+    echo 'static int dummy;' > conftest.$ac_ext
+
+    if AC_TRY_EVAL(ac_compile); then
+      soname=conftest
+      lib=conftest
+      libobjs=conftest.$ac_objext
+      deplibs=
+      wl=$lt_cv_prog_cc_wl
+      compiler_flags=-v
+      linker_flags=-v
+      verstring=
+      output_objdir=.
+      libname=conftest
+      save_allow_undefined_flag=$allow_undefined_flag
+      allow_undefined_flag=
+      if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+      then
+	lt_cv_archive_cmds_need_lc=no
+      else
+	lt_cv_archive_cmds_need_lc=yes
+      fi
+      allow_undefined_flag=$save_allow_undefined_flag
+    else
+      cat conftest.err 1>&5
+    fi])
+    AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc])
+    ;;
+  esac
+fi
+need_lc=${lt_cv_archive_cmds_need_lc-yes}
+##
+## END FIXME
+
+## FIXME: this should be a separate macro
+##
+# The second clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  :
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  test -f Makefile && make "$ltmain"
+fi
+
+if test -f "$ltmain"; then
+  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
+  $rm -f "${ofile}T"
+
+  echo creating $ofile
+
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS SED \
+    AR AR_FLAGS CC LD LN_S NM SHELL \
+    reload_flag reload_cmds wl \
+    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+    library_names_spec soname_spec \
+    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
+    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
+    old_striplib striplib file_magic_cmd export_symbols_cmds \
+    deplibs_check_method allow_undefined_flag no_undefined_flag \
+    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+    global_symbol_to_c_name_address \
+    hardcode_libdir_flag_spec hardcode_libdir_separator  \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+
+    case $var in
+    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  cat <<__EOF__ > "${ofile}T"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996-2000 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="${SED} -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$need_lc
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# The default C compiler.
+CC=$lt_CC
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP="$STRIP"
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_wl
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_pic_flag
+pic_mode=$pic_mode
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_compiler_c_o
+
+# Can we write directly to a .lo ?
+compiler_o_lo=$lt_compiler_o_lo
+
+# Must we lock files when doing compilation ?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# ### END LIBTOOL CONFIG
+
+__EOF__
+
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "${ofile}T"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | os2*)
+    cat <<'EOF' >> "${ofile}T"
+      # This is a source program that is used to create dlls on Windows
+      # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+	# This is a source program that is used to create import libraries
+	# on Windows for dlls which lack them. Don't remove nor modify the
+	# starting and closing comments
+# /* impgen.c starts here */
+# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
+#
+#  This file is part of GNU libtool.
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#  */
+#
+# #include <stdio.h>		/* for printf() */
+# #include <unistd.h>		/* for open(), lseek(), read() */
+# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
+# #include <string.h>		/* for strdup() */
+#
+# /* O_BINARY isn't required (or even defined sometimes) under Unix */
+# #ifndef O_BINARY
+# #define O_BINARY 0
+# #endif
+#
+# static unsigned int
+# pe_get16 (fd, offset)
+#      int fd;
+#      int offset;
+# {
+#   unsigned char b[2];
+#   lseek (fd, offset, SEEK_SET);
+#   read (fd, b, 2);
+#   return b[0] + (b[1]<<8);
+# }
+#
+# static unsigned int
+# pe_get32 (fd, offset)
+#     int fd;
+#     int offset;
+# {
+#   unsigned char b[4];
+#   lseek (fd, offset, SEEK_SET);
+#   read (fd, b, 4);
+#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# static unsigned int
+# pe_as32 (ptr)
+#      void *ptr;
+# {
+#   unsigned char *b = ptr;
+#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# int
+# main (argc, argv)
+#     int argc;
+#     char *argv[];
+# {
+#     int dll;
+#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+#     unsigned long export_rva, export_size, nsections, secptr, expptr;
+#     unsigned long name_rvas, nexp;
+#     unsigned char *expdata, *erva;
+#     char *filename, *dll_name;
+#
+#     filename = argv[1];
+#
+#     dll = open(filename, O_RDONLY|O_BINARY);
+#     if (dll < 1)
+# 	return 1;
+#
+#     dll_name = filename;
+#
+#     for (i=0; filename[i]; i++)
+# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
+# 	    dll_name = filename + i +1;
+#
+#     pe_header_offset = pe_get32 (dll, 0x3c);
+#     opthdr_ofs = pe_header_offset + 4 + 20;
+#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
+#
+#     if (num_entries < 1) /* no exports */
+# 	return 1;
+#
+#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
+#     export_size = pe_get32 (dll, opthdr_ofs + 100);
+#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+#     secptr = (pe_header_offset + 4 + 20 +
+# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
+#
+#     expptr = 0;
+#     for (i = 0; i < nsections; i++)
+#     {
+# 	char sname[8];
+# 	unsigned long secptr1 = secptr + 40 * i;
+# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+# 	lseek(dll, secptr1, SEEK_SET);
+# 	read(dll, sname, 8);
+# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
+# 	{
+# 	    expptr = fptr + (export_rva - vaddr);
+# 	    if (export_rva + export_size > vaddr + vsize)
+# 		export_size = vsize - (export_rva - vaddr);
+# 	    break;
+# 	}
+#     }
+#
+#     expdata = (unsigned char*)malloc(export_size);
+#     lseek (dll, expptr, SEEK_SET);
+#     read (dll, expdata, export_size);
+#     erva = expdata - export_rva;
+#
+#     nexp = pe_as32 (expdata+24);
+#     name_rvas = pe_as32 (expdata+32);
+#
+#     printf ("EXPORTS\n");
+#     for (i = 0; i<nexp; i++)
+#     {
+# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+#     }
+#
+#     return 0;
+# }
+# /* impgen.c ends here */
+
+EOF
+    ;;
+  esac
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
+
+  mv -f "${ofile}T" "$ofile" || \
+    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
+  chmod +x "$ofile"
+fi
+##
+## END FIXME
+
+])# _LT_AC_LTCONFIG_HACK
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+  enable_static=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_static=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+  enable_fast_install=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_fast_install=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_LIBTOOL_PICMODE - implement the --with-pic flag
+# Usage: AC_LIBTOOL_PICMODE[(MODE)]
+#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
+#   `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)])
+
+
+# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+  /*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC_CMD="$MAGIC_CMD"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    egrep "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC_CMD="$ac_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+])
+
+
+# AC_PATH_MAGIC - find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
+AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])
+
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by GCC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | [[A-Za-z]]:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	test "$with_gnu_ld" != no && break
+      else
+	test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+# AC_PROG_LD_GNU -
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  lt_cv_prog_gnu_ld=yes
+else
+  lt_cv_prog_gnu_ld=no
+fi])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])
+
+# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
+[lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+])
+
+# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi4*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin* | mingw* | pw32*)
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  case "$host_os" in
+  rhapsody* | darwin1.[[012]])
+    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+    ;;
+  *) # Darwin 1.3 on
+    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+    ;;
+  esac
+  ;;
+
+freebsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20*|hpux11*)
+  lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libc.sl
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+  irix5* | nonstopux*)
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case $LD in
+    *-32|*"-32 ") libmagic=32-bit;;
+    *-n32|*"-n32 ") libmagic=N32;;
+    *-64|*"-64 ") libmagic=64-bit;;
+    *) libmagic=never-match;;
+    esac
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
+    ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  case $host_cpu in
+  alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* | arm* | m68k)
+    lt_cv_deplibs_check_method=pass_all ;;
+  *)
+    # glibc up to 2.1.1 does not perform some relocations on ARM
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+openbsd*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
+  else
+    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  # this will be overridden with pass_all, but let us keep it just in case
+  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sco3.2v5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  lt_cv_file_magic_test_file=/lib/libc.so
+  ;;
+
+sysv5uw[[78]]* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+])
+
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
+AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    test -z "$ac_dir" && ac_dir=.
+    tmp_nm=$ac_dir/${ac_tool_prefix}nm
+    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      # Tru64's nm complains that /dev/null is an invalid object file
+      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+	lt_cv_path_NM="$tmp_nm -B"
+	break
+      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	lt_cv_path_NM="$tmp_nm -p"
+	break
+      else
+	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	continue # so that we can try to find one that supports BSD flags
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32*)
+  # These system don't have libm
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
+  ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library and LTDLINCL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments.  Note that LIBLTDL and LTDLINCL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
+# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
+# with '${top_builddir}/' and LTDLINCL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case $enable_ltdl_convenience in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library and LTDLINCL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments.  Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
+# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!).  If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    LTDLINCL=
+  fi
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])
+
+# old names
+AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+
+# This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])
+
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_executable_p="test -f"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+        _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+
+  # Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+: ${TMPDIR=/tmp}
+{
+  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=$TMPDIR/sed$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
+   { (exit 1); exit 1; }
+}
+  _max=0
+  _count=0
+  # Add /usr/xpg4/bin/sed as it is typically found on Solaris
+  # along with /bin/sed that truncates output.
+  for _sed in $_sed_list /usr/xpg4/bin/sed; do
+    test ! -f ${_sed} && break
+    cat /dev/null > "$tmp/sed.in"
+    _count=0
+    echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
+    # Check for GNU sed and select it if it is found.
+    if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
+      lt_cv_path_SED=${_sed}
+      break
+    fi
+    while true; do
+      cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
+      mv "$tmp/sed.tmp" "$tmp/sed.in"
+      cp "$tmp/sed.in" "$tmp/sed.nl"
+      echo >>"$tmp/sed.nl"
+      ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
+      cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
+      # 40000 chars as input seems more than enough
+      test $_count -gt 10 && break
+      _count=`expr $_count + 1`
+      if test $_count -gt $_max; then
+        _max=$_count
+        lt_cv_path_SED=$_sed
+      fi
+    done
+  done
+  rm -rf "$tmp"
+])
+if test "X$SED" != "X"; then
+  lt_cv_path_SED=$SED
+else
+  SED=$lt_cv_path_SED
+fi
+AC_MSG_RESULT([$SED])
+])