path: root/pcap.c

/*
 * Copyright (c) 1993, 1994, 1995, 1996, 1997, 1998
 *	The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the Computer Systems
 *	Engineering Group at Lawrence Berkeley Laboratory.
 * 4. Neither the name of the University nor of the Laboratory may be used
 *    to endorse or promote products derived from this software without
 *    specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#ifdef HAVE_CONFIG_H
#include <config.h>
#endif

#include <pcap-types.h>
#ifndef _WIN32
#include <sys/param.h>
#ifndef MSDOS
#include <sys/file.h>
#endif
#include <sys/ioctl.h>
#include <sys/socket.h>
#ifdef HAVE_SYS_SOCKIO_H
#include <sys/sockio.h>
#endif

struct mbuf;		/* Squelch compiler warnings on some platforms for */
struct rtentry;		/* declarations in <net/if.h> */
#include <net/if.h>
#include <netinet/in.h>
#endif /* _WIN32 */

#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#if !defined(_MSC_VER) && !defined(__BORLANDC__) && !defined(__MINGW32__)
#include <unistd.h>
#endif
#include <fcntl.h>
#include <errno.h>
#ifdef HAVE_LIMITS_H
#include <limits.h>
#else
#define INT_MAX		2147483647
#endif

#ifdef HAVE_OS_PROTO_H
#include "os-proto.h"
#endif

#ifdef MSDOS
#include "pcap-dos.h"
#endif

#include "pcap-int.h"

#ifdef HAVE_DAG_API
#include "pcap-dag.h"
#endif /* HAVE_DAG_API */

#ifdef HAVE_SEPTEL_API
#include "pcap-septel.h"
#endif /* HAVE_SEPTEL_API */

#ifdef HAVE_SNF_API
#include "pcap-snf.h"
#endif /* HAVE_SNF_API */

#ifdef HAVE_TC_API
#include "pcap-tc.h"
#endif /* HAVE_TC_API */

#ifdef PCAP_SUPPORT_USB
#include "pcap-usb-linux.h"
#endif

#ifdef PCAP_SUPPORT_BT
#include "pcap-bt-linux.h"
#endif

#ifdef PCAP_SUPPORT_BT_MONITOR
#include "pcap-bt-monitor-linux.h"
#endif

#ifdef PCAP_SUPPORT_NETFILTER
#include "pcap-netfilter-linux.h"
#endif

#ifdef PCAP_SUPPORT_NETMAP
#include "pcap-netmap.h"
#endif

#ifdef PCAP_SUPPORT_DBUS
#include "pcap-dbus.h"
#endif

#ifdef PCAP_SUPPORT_RDMASNIFF
#include "pcap-rdmasniff.h"
#endif

#ifdef _WIN32
/*
 * DllMain(), required when built as a Windows DLL.
 */
BOOL WINAPI DllMain(
  HANDLE hinstDLL,
  DWORD dwReason,
  LPVOID lpvReserved
)
{
	return (TRUE);
}

/*
 * Start WinSock.
 * Exported in case some applications using WinPcap called it,
 * even though it wasn't exported.
 */
int
wsockinit(void)
{
	WORD wVersionRequested;
	WSADATA wsaData;
	static int err = -1;
	static int done = 0;

	if (done)
		return (err);

	wVersionRequested = MAKEWORD( 1, 1);
	err = WSAStartup( wVersionRequested, &wsaData );
	atexit ((void(*)(void))WSACleanup);
	done = 1;

	if ( err != 0 )
		err = -1;
	return (err);
}

/*
 * This is the exported function; new programs should call this.
 */
int
pcap_wsockinit(void)
{
       return (wsockinit());
}
#endif /* _WIN32 */

/*
 * String containing the library version.
 * Not explicitly exported via a header file - the right API to use
 * is pcap_lib_version() - but some programs included it, so we
 * provide it.
 */
PCAP_API_DEF char pcap_version[] = PACKAGE_VERSION;

static int
pcap_not_initialized(pcap_t *pcap)
{
	if (pcap->activated) {
		/* A module probably forgot to set the function pointer */
		(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
		    "This operation isn't properly handled by that device");
		return (PCAP_ERROR);
	}
	/* in case the caller doesn't check for PCAP_ERROR_NOT_ACTIVATED */
	(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
	    "This handle hasn't been activated yet");
	/* this means 'not initialized' */
	return (PCAP_ERROR_NOT_ACTIVATED);
}

#ifdef _WIN32
static void *
pcap_not_initialized_ptr(pcap_t *pcap)
{
	if (pcap->activated) {
		/* A module probably forgot to set the function pointer */
		(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
		    "This operation isn't properly handled by that device");
		return (NULL);
	}
	(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
	    "This handle hasn't been activated yet");
	return (NULL);
}

static HANDLE
pcap_getevent_not_initialized(pcap_t *pcap)
{
	if (pcap->activated) {
		/* A module probably forgot to set the function pointer */
		(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
		    "This operation isn't properly handled by that device");
		return (INVALID_HANDLE_VALUE);
	}
	(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
	    "This handle hasn't been activated yet");
	return (INVALID_HANDLE_VALUE);
}

static u_int
pcap_sendqueue_transmit_not_initialized(pcap_t *pcap, pcap_send_queue* queue, int sync)
{
	if (pcap->activated) {
		/* A module probably forgot to set the function pointer */
		(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
		    "This operation isn't properly handled by that device");
		return (0);
	}
	(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
	    "This handle hasn't been activated yet");
	return (0);
}

static PAirpcapHandle
pcap_get_airpcap_handle_not_initialized(pcap_t *pcap)
{
	if (pcap->activated) {
		/* A module probably forgot to set the function pointer */
		(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
		    "This operation isn't properly handled by that device");
		return (NULL);
	}
	(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
	    "This handle hasn't been activated yet");
	return (NULL);
}
#endif

/*
 * Returns 1 if rfmon mode can be set on the pcap_t, 0 if it can't,
 * a PCAP_ERROR value on an error.
 */
int
pcap_can_set_rfmon(pcap_t *p)
{
	return (p->can_set_rfmon_op(p));
}

/*
 * For systems where rfmon mode is never supported.
 */
static int
pcap_cant_set_rfmon(pcap_t *p _U_)
{
	return (0);
}

/*
 * Sets *tstamp_typesp to point to an array 1 or more supported time stamp
 * types; the return value is the number of supported time stamp types.
 * The list should be freed by a call to pcap_free_tstamp_types() when
 * you're done with it.
 *
 * A return value of 0 means "you don't get a choice of time stamp type",
 * in which case *tstamp_typesp is set to null.
 *
 * PCAP_ERROR is returned on error.
 */
int
pcap_list_tstamp_types(pcap_t *p, int **tstamp_typesp)
{
	if (p->tstamp_type_count == 0) {
		/*
		 * We don't support multiple time stamp types.
		 */
		*tstamp_typesp = NULL;
	} else {
		*tstamp_typesp = (int*)calloc(sizeof(**tstamp_typesp),
		    p->tstamp_type_count);
		if (*tstamp_typesp == NULL) {
			pcap_fmt_errmsg_for_errno(p->errbuf, sizeof(p->errbuf),
			    errno, "malloc");
			return (PCAP_ERROR);
		}
		(void)memcpy(*tstamp_typesp, p->tstamp_type_list,
		    sizeof(**tstamp_typesp) * p->tstamp_type_count);
	}
	return (p->tstamp_type_count);
}

/*
 * In Windows, you might have a library built with one version of the
 * C runtime library and an application built with another version of
 * the C runtime library, which means that the library might use one
 * version of malloc() and free() and the application might use another
 * version of malloc() and free().  If so, that means something
 * allocated by the library cannot be freed by the application, so we
 * need to have a pcap_free_tstamp_types() routine to free up the list
 * allocated by pcap_list_tstamp_types(), even though it's just a wrapper
 * around free().
 */
void
pcap_free_tstamp_types(int *tstamp_type_list)
{
	free(tstamp_type_list);
}

/*
 * Default one-shot callback; overridden for capture types where the
 * packet data cannot be guaranteed to be available after the callback
 * returns, so that a copy must be made.
 */
void
pcap_oneshot(u_char *user, const struct pcap_pkthdr *h, const u_char *pkt)
{
	struct oneshot_userdata *sp = (struct oneshot_userdata *)user;

	*sp->hdr = *h;
	*sp->pkt = pkt;
}

const u_char *
pcap_next(pcap_t *p, struct pcap_pkthdr *h)
{
	struct oneshot_userdata s;
	const u_char *pkt;

	s.hdr = h;
	s.pkt = &pkt;
	s.pd = p;
	if (pcap_dispatch(p, 1, p->oneshot_callback, (u_char *)&s) <= 0)
		return (0);
	return (pkt);
}

int
pcap_next_ex(pcap_t *p, struct pcap_pkthdr **pkt_header,
    const u_char **pkt_data)
{
	struct oneshot_userdata s;

	s.hdr = &p->pcap_header;
	s.pkt = pkt_data;
	s.pd = p;

	/* Saves a pointer to the packet headers */
	*pkt_header= &p->pcap_header;

	if (p->rfile != NULL) {
		int status;

		/* We are on an offline capture */
		status = pcap_offline_read(p, 1, p->oneshot_callback,
		    (u_char *)&s);

		/*
		 * Return codes for pcap_offline_read() are:
		 *   -  0: EOF
		 *   - -1: error
		 *   - >1: OK
		 * The first one ('0') conflicts with the return code of
		 * 0 from pcap_read() meaning "no packets arrived before
		 * the timeout expired", so we map it to -2 so you can
		 * distinguish between an EOF from a savefile and a
		 * "no packets arrived before the timeout expired, try
		 * again" from a live capture.
		 */
		if (status == 0)
			return (-2);
		else
			return (status);
	}

	/*
	 * Return codes for pcap_read() are:
	 *   -  0: timeout
	 *   - -1: error
	 *   - -2: loop was broken out of with pcap_breakloop()
	 *   - >1: OK
	 * The first one ('0') conflicts with the return code of 0 from
	 * pcap_offline_read() meaning "end of file".
	*/
	return (p->read_op(p, 1, p->oneshot_callback, (u_char *)&s));
}

/*
 * Implementation of a pcap_if_list_t.
 */
struct pcap_if_list {
	pcap_if_t *beginning;
};

static struct capture_source_type {
	int (*findalldevs_op)(pcap_if_list_t *, char *);
	pcap_t *(*create_op)(const char *, char *, int *);
} capture_source_types[] = {
#ifdef HAVE_DAG_API
	{ dag_findalldevs, dag_create },
#endif
#ifdef HAVE_SEPTEL_API
	{ septel_findalldevs, septel_create },
#endif
#ifdef HAVE_SNF_API
	{ snf_findalldevs, snf_create },
#endif
#ifdef HAVE_TC_API
	{ TcFindAllDevs, TcCreate },
#endif
#ifdef PCAP_SUPPORT_BT
	{ bt_findalldevs, bt_create },
#endif
#ifdef PCAP_SUPPORT_BT_MONITOR
	{ bt_monitor_findalldevs, bt_monitor_create },
#endif
#ifdef PCAP_SUPPORT_USB
	{ usb_findalldevs, usb_create },
#endif
#ifdef PCAP_SUPPORT_NETFILTER
	{ netfilter_findalldevs, netfilter_create },
#endif
#ifdef PCAP_SUPPORT_NETMAP
	{ pcap_netmap_findalldevs, pcap_netmap_create },
#endif
#ifdef PCAP_SUPPORT_DBUS
	{ dbus_findalldevs, dbus_create },
#endif
#ifdef PCAP_SUPPORT_RDMASNIFF
	{ rdmasniff_findalldevs, rdmasniff_create },
#endif
	{ NULL, NULL }
};

/*
 * Get a list of all capture sources that are up and that we can open.
 * Returns -1 on error, 0 otherwise.
 * The list, as returned through "alldevsp", may be null if no interfaces
 * were up and could be opened.
 */
int
pcap_findalldevs(pcap_if_t **alldevsp, char *errbuf)
{
	size_t i;
	pcap_if_list_t devlist;

	/*
	 * Find all the local network interfaces on which we
	 * can capture.
	 */
	devlist.beginning = NULL;
	if (pcap_platform_finddevs(&devlist, errbuf) == -1) {
		/*
		 * Failed - free all of the entries we were given
		 * before we failed.
		 */
		if (devlist.beginning != NULL)
			pcap_freealldevs(devlist.beginning);
		*alldevsp = NULL;
		return (-1);
	}

	/*
	 * Ask each of the non-local-network-interface capture
	 * source types what interfaces they have.
	 */
	for (i = 0; capture_source_types[i].findalldevs_op != NULL; i++) {
		if (capture_source_types[i].findalldevs_op(&devlist, errbuf) == -1) {
			/*
			 * We had an error; free the list we've been
			 * constructing.
			 */
			if (devlist.beginning != NULL)
				pcap_freealldevs(devlist.beginning);
			*alldevsp = NULL;
			return (-1);
		}
	}

	/*
	 * Return the first entry of the list of all devices.
	 */
	*alldevsp = devlist.beginning;
	return (0);
}

static struct sockaddr *
dup_sockaddr(struct sockaddr *sa, size_t sa_length)
{
	struct sockaddr *newsa;

	if ((newsa = malloc(sa_length)) == NULL)
		return (NULL);
	return (memcpy(newsa, sa, sa_length));
}

/*
 * Construct a "figure of merit" for an interface, for use when sorting
 * the list of interfaces, in which interfaces that are up are superior
 * to interfaces that aren't up, interfaces that are up and running are
 * superior to interfaces that are up but not running, and non-loopback
 * interfaces that are up and running are superior to loopback interfaces,
 * and interfaces with the same flags have a figure of merit that's higher
 * the lower the instance number.
 *
 * The goal is to try to put the interfaces most likely to be useful for
 * capture at the beginning of the list.
 *
 * The figure of merit, which is lower the "better" the interface is,
 * has the uppermost bit set if the interface isn't running, the bit
 * below that set if the interface isn't up, the bit below that set
 * if the interface is a loopback interface, and the interface index
 * in the 29 bits below that.  (Yes, we assume u_int is 32 bits.)
 */
static u_int
get_figure_of_merit(pcap_if_t *dev)
{
	const char *cp;
	u_int n;

	if (strcmp(dev->name, "any") == 0) {
		/*
		 * Give the "any" device an artificially high instance
		 * number, so it shows up after all other non-loopback
		 * interfaces.
		 */
		n = 0x1FFFFFFF;	/* 29 all-1 bits */
	} else {
		/*
		 * A number at the end of the device name string is
		 * assumed to be an instance number.  Add 1 to the
		 * instance number, and use 0 for "no instance
		 * number", so we don't put "no instance number"
		 * devices and "instance 0" devices together.
		 */
		cp = dev->name + strlen(dev->name) - 1;
		while (cp-1 >= dev->name && *(cp-1) >= '0' && *(cp-1) <= '9')
			cp--;
		if (*cp >= '0' && *cp <= '9')
			n = atoi(cp) + 1;
		else
			n = 0;
	}
	if (!(dev->flags & PCAP_IF_RUNNING))
		n |= 0x80000000;
	if (!(dev->flags & PCAP_IF_UP))
		n |= 0x40000000;
	if (dev->flags & PCAP_IF_LOOPBACK)
		n |= 0x20000000;
	return (n);
}

#ifndef _WIN32
/*
 * Try to get a description for a given device.
 * Returns a mallocated description if it could and NULL if it couldn't.
 *
 * XXX - on FreeBSDs that support it, should it get the sysctl named
 * "dev.{adapter family name}.{adapter unit}.%desc" to get a description
 * of the adapter?  Note that "dev.an.0.%desc" is "Aironet PC4500/PC4800"
 * with my Cisco 350 card, so the name isn't entirely descriptive.  The
 * "dev.an.0.%pnpinfo" has a better description, although one might argue
 * that the problem is really a driver bug - if it can find out that it's
 * a Cisco 340 or 350, rather than an old Aironet card, it should use
 * that in the description.
 *
 * Do NetBSD, DragonflyBSD, or OpenBSD support this as well?  FreeBSD
 * and OpenBSD let you get a description, but it's not generated by the OS,
 * it's set with another ioctl that ifconfig supports; we use that to get
 * a description in FreeBSD and OpenBSD, but if there is no such
 * description available, it still might be nice to get some description
 * string based on the device type or something such as that.
 *
 * In OS X, the System Configuration framework can apparently return
 * names in 10.4 and later.
 *
 * It also appears that freedesktop.org's HAL offers an "info.product"
 * string, but the HAL specification says it "should not be used in any
 * UI" and "subsystem/capability specific properties" should be used
 * instead and, in any case, I think HAL is being deprecated in
 * favor of other stuff such as DeviceKit.  DeviceKit doesn't appear
 * to have any obvious product information for devices, but maybe
 * I haven't looked hard enough.
 *
 * Using the System Configuration framework, or HAL, or DeviceKit, or
 * whatever, would require that libpcap applications be linked with
 * the frameworks/libraries in question.  That shouldn't be a problem
 * for programs linking with the shared version of libpcap (unless
 * you're running on AIX - which I think is the only UN*X that doesn't
 * support linking a shared library with other libraries on which it
 * depends, and having an executable linked only with the first shared
 * library automatically pick up the other libraries when started -
 * and using HAL or whatever).  Programs linked with the static
 * version of libpcap would have to use pcap-config with the --static
 * flag in order to get the right linker flags in order to pick up
 * the additional libraries/frameworks; those programs need that anyway
 * for libpcap 1.1 and beyond on Linux, as, by default, it requires
 * -lnl.
 *
 * Do any other UN*Xes, or desktop environments support getting a
 * description?
 */
static char *
get_if_description(const char *name)
{
#ifdef SIOCGIFDESCR
	char *description = NULL;
	int s;
	struct ifreq ifrdesc;
#ifndef IFDESCRSIZE
	size_t descrlen = 64;
#else
	size_t descrlen = IFDESCRSIZE;
#endif /* IFDESCRSIZE */

	/*
	 * Get the description for the interface.
	 */
	memset(&ifrdesc, 0, sizeof ifrdesc);
	strlcpy(ifrdesc.ifr_name, name, sizeof ifrdesc.ifr_name);
	s = socket(AF_INET, SOCK_DGRAM, 0);
	if (s >= 0) {
#ifdef __FreeBSD__
		/*
		 * On FreeBSD, if the buffer isn't big enough for the
		 * description, the ioctl succeeds, but the description
		 * isn't copied, ifr_buffer.length is set to the description
		 * length, and ifr_buffer.buffer is set to NULL.
		 */
		for (;;) {
			free(description);
			if ((description = malloc(descrlen)) != NULL) {
				ifrdesc.ifr_buffer.buffer = description;
				ifrdesc.ifr_buffer.length = descrlen;
				if (ioctl(s, SIOCGIFDESCR, &ifrdesc) == 0) {
					if (ifrdesc.ifr_buffer.buffer ==
					    description)
						break;
					else
						descrlen = ifrdesc.ifr_buffer.length;
				} else {
					/*
					 * Failed to get interface description.
					 */
					free(description);
					description = NULL;
					break;
				}
			} else
				break;
		}
#else /* __FreeBSD__ */
		/*
		 * The only other OS that currently supports
		 * SIOCGIFDESCR is OpenBSD, and it has no way
		 * to get the description length - it's clamped
		 * to a maximum of IFDESCRSIZE.
		 */
		if ((description = malloc(descrlen)) != NULL) {
			ifrdesc.ifr_data = (caddr_t)description;
			if (ioctl(s, SIOCGIFDESCR, &ifrdesc) != 0) {
				/*
				 * Failed to get interface description.
				 */
				free(description);
				description = NULL;
			}
		}
#endif /* __FreeBSD__ */
		close(s);
		if (description != NULL && strlen(description) == 0) {
			/*
			 * Description is empty, so discard it.
			 */
			free(description);
			description = NULL;
		}
	}

#ifdef __FreeBSD__
	/*
	 * For FreeBSD, if we didn't get a description, and this is
	 * a device with a name of the form usbusN, label it as a USB
	 * bus.
	 */
	if (description == NULL) {
		if (strncmp(name, "usbus", 5) == 0) {
			/*
			 * OK, it begins with "usbus".
			 */
			long busnum;
			char *p;

			errno = 0;
			busnum = strtol(name + 5, &p, 10);
			if (errno == 0 && p != name + 5 && *p == '\0' &&
			    busnum >= 0 && busnum <= INT_MAX) {
				/*
				 * OK, it's a valid number that's not
				 * bigger than INT_MAX.  Construct
				 * a description from it.
				 */
				static const char descr_prefix[] = "USB bus number ";
				size_t descr_size;

				/*
				 * Allow enough room for a 32-bit bus number.
				 * sizeof (descr_prefix) includes the
				 * terminating NUL.
				 */
				descr_size = sizeof (descr_prefix) + 10;
				description = malloc(descr_size);
				if (description != NULL) {
					pcap_snprintf(description, descr_size,
					    "%s%ld", descr_prefix, busnum);
				}
			}
		}
	}
#endif
	return (description);
#else /* SIOCGIFDESCR */
	return (NULL);
#endif /* SIOCGIFDESCR */
}

/*
 * Look for a given device in the specified list of devices.
 *
 * If we find it, return a pointer to its entry.
 *
 * If we don't find it, attempt to add an entry for it, with the specified
 * IFF_ flags and description, and, if that succeeds, return a pointer to
 * the new entry, otherwise return NULL and set errbuf to an error message.
 */
pcap_if_t *
find_or_add_if(pcap_if_list_t *devlistp, const char *name,
    bpf_u_int32 if_flags, char *errbuf)
{
	bpf_u_int32 pcap_flags;

	/*
	 * Convert IFF_ flags to pcap flags.
	 */
	pcap_flags = 0;
#ifdef IFF_LOOPBACK
	if (if_flags & IFF_LOOPBACK)
		pcap_flags |= PCAP_IF_LOOPBACK;
#else
	/*
	 * We don't have IFF_LOOPBACK, so look at the device name to
	 * see if it looks like a loopback device.
	 */
	if (name[0] == 'l' && name[1] == 'o' &&
	    (isdigit((unsigned char)(name[2])) || name[2] == '\0')
		pcap_flags |= PCAP_IF_LOOPBACK;
#endif
#ifdef IFF_UP
	if (if_flags & IFF_UP)
		pcap_flags |= PCAP_IF_UP;
#endif
#ifdef IFF_RUNNING
	if (if_flags & IFF_RUNNING)
		pcap_flags |= PCAP_IF_RUNNING;
#endif

	/*
	 * Attempt to find an entry for this device; if we don't find one,
	 * attempt to add one.
	 */
	return (find_or_add_dev(devlistp, name, pcap_flags,
	    get_if_description(name), errbuf));
}

/*
 * Look for a given device in the specified list of devices.
 *
 * If we find it, then, if the specified address isn't null, add it to
 * the list of addresses for the device and return 0.
 *
 * If we don't find it, attempt to add an entry for it, with the specified
 * IFF_ flags and description, and, if that succeeds, add the specified
 * address to its list of addresses if that address is non-null, and
 * return 0, otherwise return -1 and set errbuf to an error message.
 *
 * (We can get called with a null address because we might get a list
 * of interface name/address combinations from the underlying OS, with
 * the address being absent in some cases, rather than a list of
 * interfaces with each interface having a list of addresses, so this
 * call may be the only call made to add to the list, and we want to
 * add interfaces even if they have no addresses.)
 */
int
add_addr_to_if(pcap_if_list_t *devlistp, const char *name,
    bpf_u_int32 if_flags,
    struct sockaddr *addr, size_t addr_size,
    struct sockaddr *netmask, size_t netmask_size,
    struct sockaddr *broadaddr, size_t broadaddr_size,
    struct sockaddr *dstaddr, size_t dstaddr_size,
    char *errbuf)
{
	pcap_if_t *curdev;

	/*
	 * Check whether the device exists and, if not, add it.
	 */
	curdev = find_or_add_if(devlistp, name, if_flags, errbuf);
	if (curdev == NULL) {
		/*
		 * Error - give up.
		 */
		return (-1);
	}

	if (addr == NULL) {
		/*
		 * There's no address to add; this entry just meant
		 * "here's a new interface".
		 */
		return (0);
	}

	/*
	 * "curdev" is an entry for this interface, and we have an
	 * address for it; add an entry for that address to the
	 * interface's list of addresses.
	 */
	return (add_addr_to_dev(curdev, addr, addr_size, netmask,
	    netmask_size, broadaddr, broadaddr_size, dstaddr,
	    dstaddr_size, errbuf));
}
#endif /* _WIN32 */

/*
 * Add an entry to the list of addresses for an interface.
 * "curdev" is the entry for that interface.
 */
int
add_addr_to_dev(pcap_if_t *curdev,
    struct sockaddr *addr, size_t addr_size,
    struct sockaddr *netmask, size_t netmask_size,
    struct sockaddr *broadaddr, size_t broadaddr_size,
    struct sockaddr *dstaddr, size_t dstaddr_size,
    char *errbuf)
{
	pcap_addr_t *curaddr, *prevaddr, *nextaddr;

	/*
	 * Allocate the new entry and fill it in.
	 */
	curaddr = (pcap_addr_t *)malloc(sizeof(pcap_addr_t));
	if (curaddr == NULL) {
		pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
		    errno, "malloc");
		return (-1);
	}

	curaddr->next = NULL;
	if (addr != NULL && addr_size != 0) {
		curaddr->addr = (struct sockaddr *)dup_sockaddr(addr, addr_size);
		if (curaddr->addr == NULL) {
			pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
			    errno, "malloc");
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->addr = NULL;

	if (netmask != NULL && netmask_size != 0) {
		curaddr->netmask = (struct sockaddr *)dup_sockaddr(netmask, netmask_size);
		if (curaddr->netmask == NULL) {
			pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
			    errno, "malloc");
			if (curaddr->addr != NULL)
				free(curaddr->addr);
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->netmask = NULL;

	if (broadaddr != NULL && broadaddr_size != 0) {
		curaddr->broadaddr = (struct sockaddr *)dup_sockaddr(broadaddr, broadaddr_size);
		if (curaddr->broadaddr == NULL) {
			pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
			    errno, "malloc");
			if (curaddr->netmask != NULL)
				free(curaddr->netmask);
			if (curaddr->addr != NULL)
				free(curaddr->addr);
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->broadaddr = NULL;

	if (dstaddr != NULL && dstaddr_size != 0) {
		curaddr->dstaddr = (struct sockaddr *)dup_sockaddr(dstaddr, dstaddr_size);
		if (curaddr->dstaddr == NULL) {
			pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
			    errno, "malloc");
			if (curaddr->broadaddr != NULL)
				free(curaddr->broadaddr);
			if (curaddr->netmask != NULL)
				free(curaddr->netmask);
			if (curaddr->addr != NULL)
				free(curaddr->addr);
			free(curaddr);
			return (-1);
		}
	} else
		curaddr->dstaddr = NULL;

	/*
	 * Find the end of the list of addresses.
	 */
	for (prevaddr = curdev->addresses; prevaddr != NULL; prevaddr = nextaddr) {
		nextaddr = prevaddr->next;
		if (nextaddr == NULL) {
			/*
			 * This is the end of the list.
			 */
			break;
		}
	}

	if (prevaddr == NULL) {
		/*
		 * The list was empty; this is the first member.
		 */
		curdev->addresses = curaddr;
	} else {
		/*
		 * "prevaddr" is the last member of the list; append
		 * this member to it.
		 */
		prevaddr->next = curaddr;
	}

	return (0);
}

/*
 * Look for a given device in the specified list of devices.
 *
 * If we find it, return 0 and set *curdev_ret to point to it.
 *
 * If we don't find it, attempt to add an entry for it, with the specified
 * flags and description, and, if that succeeds, return 0, otherwise
 * return -1 and set errbuf to an error message.
 */
pcap_if_t *
find_or_add_dev(pcap_if_list_t *devlistp, const char *name, bpf_u_int32 flags,
    const char *description, char *errbuf)
{
	pcap_if_t *curdev;

	/*
	 * Is there already an entry in the list for this device?
	 */
	curdev = find_dev(devlistp, name);
	if (curdev != NULL) {
		/*
		 * Yes, return it.
		 */
		return (curdev);
	}

	/*
	 * No, we didn't find it.  Try to add it to the list of devices.
	 */
	return (add_dev(devlistp, name, flags, description, errbuf));
}

/*
 * Look for a given device in the specified list of devices, and return
 * the entry for it if we find it or NULL if we don't.
 */
pcap_if_t *
find_dev(pcap_if_list_t *devlistp, const char *name)
{
	pcap_if_t *curdev;

	/*
	 * Is there an entry in the list for this device?
	 */
	for (curdev = devlistp->beginning; curdev != NULL;
	    curdev = curdev->next) {
		if (strcmp(name, curdev->name) == 0) {
			/*
			 * We found it, so, yes, there is.  No need to
			 * add it.  Provide the entry we found to our
			 * caller.
			 */
			return (curdev);
		}
	}

	/*
	 * No.
	 */
	return (NULL);
}

/*
 * Attempt to add an entry for a device, with the specified flags
 * and description, and, if that succeeds, return 0 and return a pointer
 * to the new entry, otherwise return NULL and set errbuf to an error
 * message.
 *
 * If we weren't given a description, try to get one.
 */
pcap_if_t *
add_dev(pcap_if_list_t *devlistp, const char *name, bpf_u_int32 flags,
    const char *description, char *errbuf)
{
	pcap_if_t *curdev, *prevdev, *nextdev;
	u_int this_figure_of_merit, nextdev_figure_of_merit;

	curdev = malloc(sizeof(pcap_if_t));
	if (curdev == NULL) {
		pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
		    errno, "malloc");
		return (NULL);
	}

	/*
	 * Fill in the entry.
	 */
	curdev->next = NULL;
	curdev->name = strdup(name);
	if (curdev->name == NULL) {
		pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
		    errno, "malloc");
		free(curdev);
		return (NULL);
	}
	if (description == NULL) {
		/*
		 * We weren't handed a description for the interface.
		 */
		curdev->description = NULL;
	} else {
		/*
		 * We were handed a description; make a copy.
		 */
		curdev->description = strdup(description);
		if (curdev->description == NULL) {
			pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
			    errno, "malloc");
			free(curdev->name);
			free(curdev);
			return (NULL);
		}
	}
	curdev->addresses = NULL;	/* list starts out as empty */
	curdev->flags = flags;

	/*
	 * Add it to the list, in the appropriate location.
	 * First, get the "figure of merit" for this interface.
	 */
	this_figure_of_merit = get_figure_of_merit(curdev);

	/*
	 * Now look for the last interface with an figure of merit
	 * less than or equal to the new interface's figure of merit.
	 *
	 * We start with "prevdev" being NULL, meaning we're before
	 * the first element in the list.
	 */
	prevdev = NULL;
	for (;;) {
		/*
		 * Get the interface after this one.
		 */
		if (prevdev == NULL) {
			/*
			 * The next element is the first element.
			 */
			nextdev = devlistp->beginning;
		} else
			nextdev = prevdev->next;

		/*
		 * Are we at the end of the list?
		 */
		if (nextdev == NULL) {
			/*
			 * Yes - we have to put the new entry after "prevdev".
			 */
			break;
		}

		/*
		 * Is the new interface's figure of merit less
		 * than the next interface's figure of merit,
		 * meaning that the new interface is better
		 * than the next interface?
		 */
		nextdev_figure_of_merit = get_figure_of_merit(nextdev);
		if (this_figure_of_merit < nextdev_figure_of_merit) {
			/*
			 * Yes - we should put the new entry
			 * before "nextdev", i.e. after "prevdev".
			 */
			break;
		}

		prevdev = nextdev;
	}

	/*
	 * Insert before "nextdev".
	 */
	curdev->next = nextdev;

	/*
	 * Insert after "prevdev" - unless "prevdev" is null,
	 * in which case this is the first interface.
	 */
	if (prevdev == NULL) {
		/*
		 * This is the first interface.  Make it
		 * the first element in the list of devices.
		 */
		devlistp->beginning = curdev;
	} else
		prevdev->next = curdev;
	return (curdev);
}

/*
 * Free a list of interfaces.
 */
void
pcap_freealldevs(pcap_if_t *alldevs)
{
	pcap_if_t *curdev, *nextdev;
	pcap_addr_t *curaddr, *nextaddr;

	for (curdev = alldevs; curdev != NULL; curdev = nextdev) {
		nextdev = curdev->next;

		/*
		 * Free all addresses.
		 */
		for (curaddr = curdev->addresses; curaddr != NULL; curaddr = nextaddr) {
			nextaddr = curaddr->next;
			if (curaddr->addr)
				free(curaddr->addr);
			if (curaddr->netmask)
				free(curaddr->netmask);
			if (curaddr->broadaddr)
				free(curaddr->broadaddr);
			if (curaddr->dstaddr)
				free(curaddr->dstaddr);
			free(curaddr);
		}

		/*
		 * Free the name string.
		 */
		free(curdev->name);

		/*
		 * Free the description string, if any.
		 */
		if (curdev->description != NULL)
			free(curdev->description);

		/*
		 * Free the interface.
		 */
		free(curdev);
	}
}

/*
 * pcap-npf.c has its own pcap_lookupdev(), for compatibility reasons, as
 * it actually returns the names of all interfaces, with a NUL separator
 * between them; some callers may depend on that.
 *
 * MS-DOS has its own pcap_lookupdev(), but that might be useful only
 * as an optimization.
 *
 * In all other cases, we just use pcap_findalldevs() to get a list of
 * devices, and pick from that list.
 */
#if !defined(HAVE_PACKET32) && !defined(MSDOS)
/*
 * Return the name of a network interface attached to the system, or NULL
 * if none can be found.  The interface must be configured up; the
 * lowest unit number is preferred; loopback is ignored.
 */
char *
pcap_lookupdev(errbuf)
	register char *errbuf;
{
	pcap_if_t *alldevs;
#ifdef _WIN32
  /*
   * Windows - use the same size as the old WinPcap 3.1 code.
   * XXX - this is probably bigger than it needs to be.
   */
  #define IF_NAMESIZE 8192
#else
  /*
   * UN*X - use the system's interface name size.
   * XXX - that might not be large enough for capture devices
   * that aren't regular network interfaces.
   */
  /* for old BSD systems, including bsdi3 */
  #ifndef IF_NAMESIZE
  #define IF_NAMESIZE IFNAMSIZ
  #endif
#endif
	static char device[IF_NAMESIZE + 1];
	char *ret;

	if (pcap_findalldevs(&alldevs, errbuf) == -1)
		return (NULL);

	if (alldevs == NULL || (alldevs->flags & PCAP_IF_LOOPBACK)) {
		/*
		 * There are no devices on the list, or the first device
		 * on the list is a loopback device, which means there
		 * are no non-loopback devices on the list.  This means
		 * we can't return any device.
		 *
		 * XXX - why not return a loopback device?  If we can't
		 * capture on it, it won't be on the list, and if it's
		 * on the list, there aren't any non-loopback devices,
		 * so why not just supply it as the default device?
		 */
		(void)strlcpy(errbuf, "no suitable device found",
		    PCAP_ERRBUF_SIZE);
		ret = NULL;
	} else {
		/*
		 * Return the name of the first device on the list.
		 */
		(void)strlcpy(device, alldevs->name, sizeof(device));
		ret = device;
	}

	pcap_freealldevs(alldevs);
	return (ret);
}
#endif /* !defined(HAVE_PACKET32) && !defined(MSDOS) */

#if !defined(_WIN32) && !defined(MSDOS)
/*
 * We don't just fetch the entire list of devices, search for the
 * particular device, and use its first IPv4 address, as that's too
 * much work to get just one device's netmask.
 *
 * If we had an API to get attributes for a given device, we could
 * use that.
 */
int
pcap_lookupnet(device, netp, maskp, errbuf)
	register const char *device;
	register bpf_u_int32 *netp, *maskp;
	register char *errbuf;
{
	register int fd;
	register struct sockaddr_in *sin4;
	struct ifreq ifr;

	/*
	 * The pseudo-device "any" listens on all interfaces and therefore
	 * has the network address and -mask "0.0.0.0" therefore catching
	 * all traffic. Using NULL for the interface is the same as "any".
	 */
	if (!device || strcmp(device, "any") == 0
#ifdef HAVE_DAG_API
	    || strstr(device, "dag") != NULL
#endif
#ifdef HAVE_SEPTEL_API
	    || strstr(device, "septel") != NULL
#endif
#ifdef PCAP_SUPPORT_BT
	    || strstr(device, "bluetooth") != NULL
#endif
#ifdef PCAP_SUPPORT_USB
	    || strstr(device, "usbmon") != NULL
#endif
#ifdef HAVE_SNF_API
	    || strstr(device, "snf") != NULL
#endif
#ifdef PCAP_SUPPORT_NETMAP
	    || strncmp(device, "netmap:", 7) == 0
	    || strncmp(device, "vale", 4) == 0
#endif
	    ) {
		*netp = *maskp = 0;
		return 0;
	}

	fd = socket(AF_INET, SOCK_DGRAM, 0);
	if (fd < 0) {
		pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
		    errno, "socket");
		return (-1);
	}
	memset(&ifr, 0, sizeof(ifr));
#ifdef linux
	/* XXX Work around Linux kernel bug */
	ifr.ifr_addr.sa_family = AF_INET;
#endif
	(void)strlcpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
	if (ioctl(fd, SIOCGIFADDR, (char *)&ifr) < 0) {
		if (errno == EADDRNOTAVAIL) {
			(void)pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "%s: no IPv4 address assigned", device);
		} else {
			pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
			    errno, "SIOCGIFADDR: %s", device);
		}
		(void)close(fd);
		return (-1);
	}
	sin4 = (struct sockaddr_in *)&ifr.ifr_addr;
	*netp = sin4->sin_addr.s_addr;
	memset(&ifr, 0, sizeof(ifr));
#ifdef linux
	/* XXX Work around Linux kernel bug */
	ifr.ifr_addr.sa_family = AF_INET;
#endif
	(void)strlcpy(ifr.ifr_name, device, sizeof(ifr.ifr_name));
	if (ioctl(fd, SIOCGIFNETMASK, (char *)&ifr) < 0) {
		pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
		    errno, "SIOCGIFNETMASK: %s", device);
		(void)close(fd);
		return (-1);
	}
	(void)close(fd);
	*maskp = sin4->sin_addr.s_addr;
	if (*maskp == 0) {
		if (IN_CLASSA(*netp))
			*maskp = IN_CLASSA_NET;
		else if (IN_CLASSB(*netp))
			*maskp = IN_CLASSB_NET;
		else if (IN_CLASSC(*netp))
			*maskp = IN_CLASSC_NET;
		else {
			(void)pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "inet class for 0x%x unknown", *netp);
			return (-1);
		}
	}
	*netp &= *maskp;
	return (0);
}
#endif /* !defined(_WIN32) && !defined(MSDOS) */

#ifdef ENABLE_REMOTE
#include "pcap-rpcap.h"

/*
 * Extract a substring from a string.
 */
static char *
get_substring(const char *p, size_t len, char *ebuf)
{
	char *token;

	token = malloc(len + 1);
	if (token == NULL) {
		pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE,
		    errno, "malloc");
		return (NULL);
	}
	memcpy(token, p, len);
	token[len] = '\0';
	return (token);
}

/*
 * Parse a capture source that might be a URL.
 *
 * If the source is not a URL, *schemep, *userinfop, *hostp, and *portp
 * are set to NULL, *pathp is set to point to the source, and 0 is
 * returned.
 *
 * If source is a URL, and the URL refers to a local device (a special
 * case of rpcap:), *schemep, *userinfop, *hostp, and *portp are set
 * to NULL, *pathp is set to point to the device name, and 0 is returned.
 *
 * If source is a URL, and it's not a special case that refers to a local
 * device, and the parse succeeds:
 *
 *    *schemep is set to point to an allocated string containing the scheme;
 *
 *    if user information is present in the URL, *userinfop is set to point
 *    to an allocated string containing the user information, otherwise
 *    it's set to NULL;
 *
 *    if host information is present in the URL, *hostp is set to point
 *    to an allocated string containing the host information, otherwise
 *    it's set to NULL;
 *
 *    if a port number is present in the URL, *portp is set to point
 *    to an allocated string containing the port number, otherwise
 *    it's set to NULL;
 *
 *    *pathp is set to point to an allocated string containing the
 *    path;
 *
 * and 0 is returned.
 *
 * If the parse fails, ebuf is set to an error string, and -1 is returned.
 */
static int
pcap_parse_source(const char *source, char **schemep, char **userinfop,
    char **hostp, char **portp, char **pathp, char *ebuf)
{
	char *colonp;
	size_t scheme_len;
	char *scheme;
	const char *endp;
	size_t authority_len;
	char *authority;
	char *parsep, *atsignp, *bracketp;
	char *userinfo, *host, *port, *path;

	/*
	 * Start out returning nothing.
	 */
	*schemep = NULL;
	*userinfop = NULL;
	*hostp = NULL;
	*portp = NULL;
	*pathp = NULL;

	/*
	 * RFC 3986 says:
	 *
	 *   URI         = scheme ":" hier-part [ "?" query ] [ "#" fragment ]
	 *
	 *   hier-part   = "//" authority path-abempty
	 *               / path-absolute
	 *               / path-rootless
	 *               / path-empty
	 *
	 *   authority   = [ userinfo "@" ] host [ ":" port ]
	 *
	 *   userinfo    = *( unreserved / pct-encoded / sub-delims / ":" )
         *
         * Step 1: look for the ":" at the end of the scheme.
	 * A colon in the source is *NOT* sufficient to indicate that
	 * this is a URL, as interface names on some platforms might
	 * include colons (e.g., I think some Solaris interfaces
	 * might).
	 */
	colonp = strchr(source, ':');
	if (colonp == NULL) {
		/*
		 * The source is the device to open.
		 * Return a NULL pointer for the scheme, user information,
		 * host, and port, and return the device as the path.
		 */
		*pathp = strdup(source);
		if (*pathp == NULL) {
			pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE,
			    errno, "malloc");
			return (-1);
		}
		return (0);
	}

	/*
	 * All schemes must have "//" after them, i.e. we only support
	 * hier-part   = "//" authority path-abempty, not
	 * hier-part   = path-absolute
	 * hier-part   = path-rootless
	 * hier-part   = path-empty
	 *
	 * We need that in order to distinguish between a local device
	 * name that happens to contain a colon and a URI.
	 */
	if (strncmp(colonp + 1, "//", 2) != 0) {
		/*
		 * The source is the device to open.
		 * Return a NULL pointer for the scheme, user information,
		 * host, and port, and return the device as the path.
		 */
		*pathp = strdup(source);
		if (*pathp == NULL) {
			pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE,
			    errno, "malloc");
			return (-1);
		}
		return (0);
	}

	/*
	 * XXX - check whether the purported scheme could be a scheme?
	 */

	/*
	 * OK, this looks like a URL.
	 * Get the scheme.
	 */
	scheme_len = colonp - source;
	scheme = malloc(scheme_len + 1);
	if (scheme == NULL) {
		pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE,
		    errno, "malloc");
		return (-1);
	}
	memcpy(scheme, source, scheme_len);
	scheme[scheme_len] = '\0';

	/*
	 * Treat file: specially - take everything after file:// as
	 * the pathname.
	 */
	if (pcap_strcasecmp(scheme, "file") == 0) {
		*schemep = scheme;
		*pathp = strdup(colonp + 3);
		if (*pathp == NULL) {
			pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE,
			    errno, "malloc");
			return (-1);
		}
		return (0);
	}

	/*
	 * The WinPcap documentation says you can specify a local
	 * interface with "rpcap://{device}"; we special-case
	 * that here.  If the scheme is "rpcap", and there are
	 * no slashes past the "//", we just return the device.
	 *
	 * XXX - %-escaping?
	 */
	if (pcap_strcasecmp(scheme, "rpcap") == 0 &&
	    strchr(colonp + 3, '/') == NULL) {
		/*
		 * Local device.
		 *
		 * Return a NULL pointer for the scheme, user information,
		 * host, and port, and return the device as the path.
		 */
		free(scheme);
		*pathp = strdup(colonp + 3);
		if (*pathp == NULL) {
			pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE,
			    errno, "malloc");
			return (-1);
		}
		return (0);
	}

	/*
	 * OK, now start parsing the authority.
	 * Get token, terminated with / or terminated at the end of
	 * the string.
	 */
	authority_len = strcspn(colonp + 3, "/");
	authority = get_substring(colonp + 3, authority_len, ebuf);
	if (authority == NULL) {
		/*
		 * Error.
		 */
		free(scheme);
		return (-1);
	}
	endp = colonp + 3 + authority_len;

	/*
	 * Now carve the authority field into its components.
	 */
	parsep = authority;

	/*
	 * Is there a userinfo field?
	 */
	atsignp = strchr(parsep, '@');
	if (atsignp != NULL) {
		/*
		 * Yes.
		 */
		size_t userinfo_len;

		userinfo_len = atsignp - parsep;
		userinfo = get_substring(parsep, userinfo_len, ebuf);
		if (userinfo == NULL) {
			/*
			 * Error.
			 */
			free(authority);
			free(scheme);
			return (-1);
		}
		parsep = atsignp + 1;
	} else {
		/*
		 * No.
		 */
		userinfo = NULL;
	}

	/*
	 * Is there a host field?
	 */
	if (*parsep == '\0') {
		/*
		 * No; there's no host field or port field.
		 */
		host = NULL;
		port = NULL;
	} else {
		/*
		 * Yes.
		 */
		size_t host_len;

		/*
		 * Is it an IP-literal?
		 */
		if (*parsep == '[') {
			/*
			 * Yes.
			 * Treat verything up to the closing square
			 * bracket as the IP-Literal; we don't worry
			 * about whether it's a valid IPv6address or
			 * IPvFuture.
			 */
			bracketp = strchr(parsep, ']');
			if (bracketp == NULL) {
				/*
				 * There's no closing square bracket.
				 */
				pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE,
				    "IP-literal in URL doesn't end with ]");
				free(userinfo);
				free(authority);
				free(scheme);
				return (-1);
			}
			if (*(bracketp + 1) != '\0' &&
			    *(bracketp + 1) != ':') {
				/*
				 * There's extra crud after the
				 * closing square bracketn.
				 */
				pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE,
				    "Extra text after IP-literal in URL");
				free(userinfo);
				free(authority);
				free(scheme);
				return (-1);
			}
			host_len = (bracketp - 1) - parsep;
			host = get_substring(parsep + 1, host_len, ebuf);
			if (host == NULL) {
				/*
				 * Error.
				 */
				free(userinfo);
				free(authority);
				free(scheme);
				return (-1);
			}
			parsep = bracketp + 1;
		} else {
			/*
			 * No.
			 * Treat everything up to a : or the end of
			 * the string as the host.
			 */
			host_len = strcspn(parsep, ":");
			host = get_substring(parsep, host_len, ebuf);
			if (host == NULL) {
				/*
				 * Error.
				 */
				free(userinfo);
				free(authority);
				free(scheme);
				return (-1);
			}
			parsep = parsep + host_len;
		}

		/*
		 * Is there a port field?
		 */
		if (*parsep == ':') {
			/*
			 * Yes.  It's the rest of the authority field.
			 */
			size_t port_len;

			parsep++;
			port_len = strlen(parsep);
			port = get_substring(parsep, port_len, ebuf);
			if (port == NULL) {
				/*
				 * Error.
				 */
				free(host);
				free(userinfo);
				free(authority);
				free(scheme);
				return (-1);
			}
		} else {
			/*
			 * No.
			 */
			port = NULL;
		}
	}
	free(authority);

	/*
	 * Everything else is the path.  Strip off the leading /.
	 */
	if (*endp == '\0')
		path = strdup("");
	else
		path = strdup(endp + 1);
	if (path == NULL) {
		pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE,
		    errno, "malloc");
		free(port);
		free(host);
		free(userinfo);
		free(scheme);
		return (-1);
	}
	*schemep = scheme;
	*userinfop = userinfo;
	*hostp = host;
	*portp = port;
	*pathp = path;
	return (0);
}

int
pcap_createsrcstr(char *source, int type, const char *host, const char *port,
    const char *name, char *errbuf)
{
	switch (type) {

	case PCAP_SRC_FILE:
		strlcpy(source, PCAP_SRC_FILE_STRING, PCAP_BUF_SIZE);
		if (name != NULL && *name != '\0') {
			strlcat(source, name, PCAP_BUF_SIZE);
			return (0);
		} else {
			pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "The file name cannot be NULL.");
			return (-1);
		}

	case PCAP_SRC_IFREMOTE:
		strlcpy(source, PCAP_SRC_IF_STRING, PCAP_BUF_SIZE);
		if (host != NULL && *host != '\0') {
			if (strchr(host, ':') != NULL) {
				/*
				 * The host name contains a colon, so it's
				 * probably an IPv6 address, and needs to
				 * be included in square brackets.
				 */
				strlcat(source, "[", PCAP_BUF_SIZE);
				strlcat(source, host, PCAP_BUF_SIZE);
				strlcat(source, "]", PCAP_BUF_SIZE);
			} else
				strlcat(source, host, PCAP_BUF_SIZE);

			if (port != NULL && *port != '\0') {
				strlcat(source, ":", PCAP_BUF_SIZE);
				strlcat(source, port, PCAP_BUF_SIZE);
			}

			strlcat(source, "/", PCAP_BUF_SIZE);
		} else {
			pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE,
			    "The host name cannot be NULL.");
			return (-1);
		}

		if (name != NULL && *name != '\0')
			strlcat(source, name, PCAP_BUF_SIZE);

		return (0);

	case PCAP_SRC_IFLOCAL:
		strlcpy(source, PCAP_SRC_IF_STRING, PCAP_BUF_SIZE);

		if (name != NULL && *name != '\0')
			strlcat(source, name, PCAP_BUF_SIZE);

		return (0);

	default:
		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE,
		    "The interface type is not valid.");
		return (-1);
	}
}

int
pcap_parsesrcstr(const char *source, int *type, char *host, char *port,
    char *name, char *errbuf)
{
	char *scheme, *tmpuserinfo, *tmphost, *tmpport, *tmppath;

	/* Initialization stuff */
	if (host)
		*host = '\0';
	if (port)
		*port = '\0';
	if (name)
		*name = '\0';

	/* Parse the source string */
	if (pcap_parse_source(source, &scheme, &tmpuserinfo, &tmphost,
	    &tmpport, &tmppath, errbuf) == -1) {
		/*
		 * Fail.
		 */
		return (-1);
	}

	if (scheme == NULL) {
		/*
		 * Local device.
		 */
		if (name && tmppath)
			strlcpy(name, tmppath, PCAP_BUF_SIZE);
		if (type)
			*type = PCAP_SRC_IFLOCAL;
		free(tmppath);
		free(tmphost);
		free(tmpuserinfo);
		return (0);
	}

	if (strcmp(scheme, "rpcap") == 0) {
		/*
		 * rpcap://
		 *
		 * pcap_parse_source() has already handled the case of
		 * rpcap://device
		 */
		if (host && tmphost) {
			if (tmpuserinfo)
				pcap_snprintf(host, PCAP_BUF_SIZE, "%s@%s",
				    tmpuserinfo, tmphost);
			else
				strlcpy(host, tmphost, PCAP_BUF_SIZE);
		}
		if (port && tmpport)
			strlcpy(port, tmpport, PCAP_BUF_SIZE);
		if (name && tmppath)
			strlcpy(name, tmppath, PCAP_BUF_SIZE);
		if (type)
			*type = PCAP_SRC_IFREMOTE;
		free(tmppath);
		free(tmphost);
		free(tmpuserinfo);
		free(scheme);
		return (0);
	}

	if (strcmp(scheme, "file") == 0) {
		/*
		 * file://
		 */
		if (name && tmppath)
			strlcpy(name, tmppath, PCAP_BUF_SIZE);
		if (type)
			*type = PCAP_SRC_FILE;
		free(tmppath);
		free(tmphost);
		free(tmpuserinfo);
		free(scheme);
		return (0);
	}

	/*
	 * Neither rpcap: nor file:; just treat the entire string
	 * as a local device.
	 */
	if (name)
		strlcpy(name, source, PCAP_BUF_SIZE);
	if (type)
		*type = PCAP_SRC_IFLOCAL;
	free(tmppath);
	free(tmpport);
	free(tmphost);
	free(tmpuserinfo);
	free(scheme);
	return (0);
}
#endif

pcap_t *
pcap_create(const char *device, char *errbuf)
{
	size_t i;
	int is_theirs;
	pcap_t *p;
	char *device_str;

	/*
	 * A null device name is equivalent to the "any" device -
	 * which might not be supported on this platform, but
	 * this means that you'll get a "not supported" error
	 * rather than, say, a crash when we try to dereference
	 * the null pointer.
	 */
	if (device == NULL)
		device_str = strdup("any");
	else {
#ifdef _WIN32
		/*
		 * If the string appears to be little-endian UCS-2/UTF-16,
		 * convert it to ASCII.
		 *
		 * XXX - to UTF-8 instead?  Or report an error if any
		 * character isn't ASCII?
		 */
		if (device[0] != '\0' && device[1] == '\0') {
			size_t length;

			length = wcslen((wchar_t *)device);
			device_str = (char *)malloc(length + 1);
			if (device_str == NULL) {
				pcap_fmt_errmsg_for_errno(errbuf,
				    PCAP_ERRBUF_SIZE, errno,
				    "malloc");
				return (NULL);
			}

			pcap_snprintf(device_str, length + 1, "%ws",
			    (const wchar_t *)device);
		} else
#endif
			device_str = strdup(device);
	}
	if (device_str == NULL) {
		pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE,
		    errno, "malloc");
		return (NULL);
	}

	/*
	 * Try each of the non-local-network-interface capture
	 * source types until we find one that works for this
	 * device or run out of types.
	 */
	for (i = 0; capture_source_types[i].create_op != NULL; i++) {
		is_theirs = 0;
		p = capture_source_types[i].create_op(device_str, errbuf,
		    &is_theirs);
		if (is_theirs) {
			/*
			 * The device name refers to a device of the
			 * type in question; either it succeeded,
			 * in which case p refers to a pcap_t to
			 * later activate for the device, or it
			 * failed, in which case p is null and we
			 * should return that to report the failure
			 * to create.
			 */
			if (p == NULL) {
				/*
				 * We assume the caller filled in errbuf.
				 */
				free(device_str);
				return (NULL);
			}
			p->opt.device = device_str;
			return (p);
		}
	}

	/*
	 * OK, try it as a regular network interface.
	 */
	p = pcap_create_interface(device_str, errbuf);
	if (p == NULL) {
		/*
		 * We assume the caller filled in errbuf.
		 */
		free(device_str);
		return (NULL);
	}
	p->opt.device = device_str;
	return (p);
}

/*
 * Set nonblocking mode on an unactivated pcap_t; this sets a flag
 * checked by pcap_activate(), which sets the mode after calling
 * the activate routine.
 */
static int
pcap_setnonblock_unactivated(pcap_t *p, int nonblock)
{
	p->opt.nonblock = nonblock;
	return (0);
}

static void
initialize_ops(pcap_t *p)
{
	/*
	 * Set operation pointers for operations that only work on
	 * an activated pcap_t to point to a routine that returns
	 * a "this isn't activated" error.
	 */
	p->read_op = (read_op_t)pcap_not_initialized;
	p->inject_op = (inject_op_t)pcap_not_initialized;
	p->setfilter_op = (setfilter_op_t)pcap_not_initialized;
	p->setdirection_op = (setdirection_op_t)pcap_not_initialized;
	p->set_datalink_op = (set_datalink_op_t)pcap_not_initialized;
	p->getnonblock_op = (getnonblock_op_t)pcap_not_initialized;
	p->stats_op = (stats_op_t)pcap_not_initialized;
#ifdef _WIN32
	p->stats_ex_op = (stats_ex_op_t)pcap_not_initialized_ptr;
	p->setbuff_op = (setbuff_op_t)pcap_not_initialized;
	p->setmode_op = (setmode_op_t)pcap_not_initialized;
	p->setmintocopy_op = (setmintocopy_op_t)pcap_not_initialized;
	p->getevent_op = pcap_getevent_not_initialized;
	p->oid_get_request_op = (oid_get_request_op_t)pcap_not_initialized;
	p->oid_set_request_op = (oid_set_request_op_t)pcap_not_initialized;
	p->sendqueue_transmit_op = pcap_sendqueue_transmit_not_initialized;
	p->setuserbuffer_op = (setuserbuffer_op_t)pcap_not_initialized;
	p->live_dump_op = (live_dump_op_t)pcap_not_initialized;
	p->live_dump_ended_op = (live_dump_ended_op_t)pcap_not_initialized;
	p->get_airpcap_handle_op = pcap_get_airpcap_handle_not_initialized;
#endif

	/*
	 * Default cleanup operation - implementations can override
	 * this, but should call pcap_cleanup_live_common() after
	 * doing their own additional cleanup.
	 */
	p->cleanup_op = pcap_cleanup_live_common;

	/*
	 * In most cases, the standard one-shot callback can
	 * be used for pcap_next()/pcap_next_ex().
	 */
	p->oneshot_callback = pcap_oneshot;
}

static pcap_t *
pcap_alloc_pcap_t(char *ebuf, size_t size)
{
	char *chunk;
	pcap_t *p;

	/*
	 * Allocate a chunk of memory big enough for a pcap_t
	 * plus a structure following it of size "size".  The
	 * structure following it is a private data structure
	 * for the routines that handle this pcap_t.
	 */
	chunk = malloc(sizeof (pcap_t) + size);
	if (chunk == NULL) {
		pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE,
		    errno, "malloc");
		return (NULL);
	}
	memset(chunk, 0, sizeof (pcap_t) + size);

	/*
	 * Get a pointer to the pcap_t at the beginning.
	 */
	p = (pcap_t *)chunk;

#ifdef _WIN32
	p->handle = INVALID_HANDLE_VALUE;	/* not opened yet */
#else
	p->fd = -1;	/* not opened yet */
	p->selectable_fd = -1;
#endif

	if (size == 0) {
		/* No private data was requested. */
		p->priv = NULL;
	} else {
		/*
		 * Set the pointer to the private data; that's the structure
		 * of size "size" following the pcap_t.
		 */
		p->priv = (void *)(chunk + sizeof (pcap_t));
	}

	return (p);
}

pcap_t *
pcap_create_common(char *ebuf, size_t size)
{
	pcap_t *p;

	p = pcap_alloc_pcap_t(ebuf, size);
	if (p == NULL)
		return (NULL);

	/*
	 * Default to "can't set rfmon mode"; if it's supported by
	 * a platform, the create routine that called us can set
	 * the op to its routine to check whether a particular
	 * device supports it.
	 */
	p->can_set_rfmon_op = pcap_cant_set_rfmon;

	/*
	 * If pcap_setnonblock() is called on a not-yet-activated
	 * pcap_t, default to setting a flag and turning
	 * on non-blocking mode when activated.
	 */
	p->setnonblock_op = pcap_setnonblock_unactivated;

	initialize_ops(p);

	/* put in some defaults*/
	p->snapshot = 0;		/* max packet size unspecified */
	p->opt.timeout = 0;		/* no timeout specified */
	p->opt.buffer_size = 0;		/* use the platform's default */
	p->opt.promisc = 0;
	p->opt.rfmon = 0;
	p->opt.immediate = 0;
	p->opt.tstamp_type = -1;	/* default to not setting time stamp type */
	p->opt.tstamp_precision = PCAP_TSTAMP_PRECISION_MICRO;
	/*
	 * Platform-dependent options.
	 */
#ifdef __linux__
	p->opt.protocol = 0;
#endif
#ifdef _WIN32
	p->opt.nocapture_local = 0;
#endif

	/*
	 * Start out with no BPF code generation flags set.
	 */
	p->bpf_codegen_flags = 0;

	return (p);
}

int
pcap_check_activated(pcap_t *p)
{
	if (p->activated) {
		pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "can't perform "
			" operation on activated capture");
		return (-1);
	}
	return (0);
}

int
pcap_set_snaplen(pcap_t *p, int snaplen)
{
	if (pcap_check_activated(p))
		return (PCAP_ERROR_ACTIVATED);
	p->snapshot = snaplen;
	return (0);
}

int
pcap_set_promisc(pcap_t *p, int promisc)
{
	if (pcap_check_activated(p))
		return (PCAP_ERROR_ACTIVATED);
	p->opt.promisc = promisc;
	return (0);
}

int
pcap_set_rfmon(pcap_t *p, int rfmon)
{
	if (pcap_check_activated(p))
		return (PCAP_ERROR_ACTIVATED);
	p->opt.rfmon = rfmon;
	return (0);
}

int
pcap_set_timeout(pcap_t *p, int timeout_ms)
{
	if (pcap_check_activated(p))
		return (PCAP_ERROR_ACTIVATED);
	p->opt.timeout = timeout_ms;
	return (0);
}

int
pcap_set_tstamp_type(pcap_t *p, int tstamp_type)
{
	int i;

	if (pcap_check_activated(p))
		return (PCAP_ERROR_ACTIVATED);

	/*
	 * The argument should have been u_int, but that's too late
	 * to change now - it's an API.
	 */
	if (tstamp_type < 0)
		return (PCAP_WARNING_TSTAMP_TYPE_NOTSUP);

	/*
	 * If p->tstamp_type_count is 0, we only support PCAP_TSTAMP_HOST;
	 * the default time stamp type is PCAP_TSTAMP_HOST.
	 */
	if (p->tstamp_type_count == 0) {
		if (tstamp_type == PCAP_TSTAMP_HOST) {
			p->opt.tstamp_type = tstamp_type;
			return (0);
		}
	} else {
		/*
		 * Check whether we claim to support this type of time stamp.
		 */
		for (i = 0; i < p->tstamp_type_count; i++) {
			if (p->tstamp_type_list[i] == (u_int)tstamp_type) {
				/*
				 * Yes.
				 */
				p->opt.tstamp_type = tstamp_type;
				return (0);
			}
		}
	}

	/*
	 * We don't support this type of time stamp.
	 */
	return (PCAP_WARNING_TSTAMP_TYPE_NOTSUP);
}

int
pcap_set_immediate_mode(pcap_t *p, int immediate)
{
	if (pcap_check_activated(p))
		return (PCAP_ERROR_ACTIVATED);
	p->opt.immediate = immediate;
	return (0);
}

int
pcap_set_buffer_size(pcap_t *p, int buffer_size)
{
	if (pcap_check_activated(p))
		return (PCAP_ERROR_ACTIVATED);
	if (buffer_size <= 0) {
		/*
		 * Silently ignore invalid values.
		 */
		return (0);
	}
	p->opt.buffer_size = buffer_size;
	return (0);
}

int
pcap_set_tstamp_precision(pcap_t *p, int tstamp_precision)
{
	int i;

	if (pcap_check_activated(p))
		return (PCAP_ERROR_ACTIVATED);

	/*
	 * The argument should have been u_int, but that's too late
	 * to change now - it's an API.
	 */
	if (tstamp_precision < 0)
		return (PCAP_ERROR_TSTAMP_PRECISION_NOTSUP);

	/*
	 * If p->tstamp_precision_count is 0, we only support setting
	 * the time stamp precision to microsecond precision; every
	 * pcap module *MUST* support microsecond precision, even if
	 * it does so by converting the native precision to
	 * microseconds.
	 */
	if (p->tstamp_precision_count == 0) {
		if (tstamp_precision == PCAP_TSTAMP_PRECISION_MICRO) {
			p->opt.tstamp_precision = tstamp_precision;
			return (0);
		}
	} else {
		/*
		 * Check whether we claim to support this precision of
		 * time stamp.
		 */
		for (i = 0; i < p->tstamp_precision_count; i++) {
			if (p->tstamp_precision_list[i] == (u_int)tstamp_precision) {
				/*
				 * Yes.
				 */
				p->opt.tstamp_precision = tstamp_precision;
				return (0);
			}
		}
	}

	/*
	 * We don't support this time stamp precision.
	 */
	return (PCAP_ERROR_TSTAMP_PRECISION_NOTSUP);
}

int
pcap_get_tstamp_precision(pcap_t *p)
{
        return (p->opt.tstamp_precision);
}

int
pcap_activate(pcap_t *p)
{
	int status;

	/*
	 * Catch attempts to re-activate an already-activated
	 * pcap_t; this should, for example, catch code that
	 * calls pcap_open_live() followed by pcap_activate(),
	 * as some code that showed up in a Stack Exchange
	 * question did.
	 */
	if (pcap_check_activated(p))
		return (PCAP_ERROR_ACTIVATED);
	status = p->activate_op(p);
	if (status >= 0) {
		/*
		 * If somebody requested non-blocking mode before
		 * calling pcap_activate(), turn it on now.
		 */
		if (p->opt.nonblock) {
			status = p->setnonblock_op(p, 1);
			if (status < 0) {
				/*
				 * Failed.  Undo everything done by
				 * the activate operation.
				 */
				p->cleanup_op(p);
				initialize_ops(p);
				return (status);
			}
		}
		p->activated = 1;
	} else {
		if (p->errbuf[0] == '\0') {
			/*
			 * No error message supplied by the activate routine;
			 * for the benefit of programs that don't specially
			 * handle errors other than PCAP_ERROR, return the
			 * error message corresponding to the status.
			 */
			pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s",
			    pcap_statustostr(status));
		}

		/*
		 * Undo any operation pointer setting, etc. done by
		 * the activate operation.
		 */
		initialize_ops(p);
	}
	return (status);
}

pcap_t *
pcap_open_live(const char *device, int snaplen, int promisc, int to_ms, char *errbuf)
{
	pcap_t *p;
	int status;
#ifdef ENABLE_REMOTE
	char host[PCAP_BUF_SIZE + 1];
	char port[PCAP_BUF_SIZE + 1];
	char name[PCAP_BUF_SIZE + 1];
	int srctype;

	/*
	 * Retrofit - we have to make older applications compatible with
	 * remote capture.
	 * So we're calling pcap_open_remote() from here; this is a very
	 * dirty hack.
	 * Obviously, we cannot exploit all the new features; for instance,
	 * we cannot send authentication, we cannot use a UDP data connection,
	 * and so on.
	 */
	if (pcap_parsesrcstr(device, &srctype, host, port, name, errbuf))
		return (NULL);

	if (srctype == PCAP_SRC_IFREMOTE) {
		/*
		 * Although we already have host, port and iface, we prefer
		 * to pass only 'device' to pcap_open_rpcap(), so that it has
		 * to call pcap_parsesrcstr() again.
		 * This is less optimized, but much clearer.
		 */
		return (pcap_open_rpcap(device, snaplen,
		    promisc ? PCAP_OPENFLAG_PROMISCUOUS : 0, to_ms,
		    NULL, errbuf));
	}
	if (srctype == PCAP_SRC_FILE) {
		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "unknown URL scheme \"file\"");
		return (NULL);
	}
	if (srctype == PCAP_SRC_IFLOCAL) {
		/*
		 * If it starts with rpcap://, that refers to a local device
		 * (no host part in the URL). Remove the rpcap://, and
		 * fall through to the regular open path.
		 */
		if (strncmp(device, PCAP_SRC_IF_STRING, strlen(PCAP_SRC_IF_STRING)) == 0) {
			size_t len = strlen(device) - strlen(PCAP_SRC_IF_STRING) + 1;

			if (len > 0)
				device += strlen(PCAP_SRC_IF_STRING);
		}
	}
#endif	/* ENABLE_REMOTE */

	p = pcap_create(device, errbuf);
	if (p == NULL)
		return (NULL);
	status = pcap_set_snaplen(p, snaplen);
	if (status < 0)
		goto fail;
	status = pcap_set_promisc(p, promisc);
	if (status < 0)
		goto fail;
	status = pcap_set_timeout(p, to_ms);
	if (status < 0)
		goto fail;
	/*
	 * Mark this as opened with pcap_open_live(), so that, for
	 * example, we show the full list of DLT_ values, rather
	 * than just the ones that are compatible with capturing
	 * when not in monitor mode.  That allows existing applications
	 * to work the way they used to work, but allows new applications
	 * that know about the new open API to, for example, find out the
	 * DLT_ values that they can select without changing whether
	 * the adapter is in monitor mode or not.
	 */
	p->oldstyle = 1;
	status = pcap_activate(p);
	if (status < 0)
		goto fail;
	return (p);
fail:
	if (status == PCAP_ERROR)
		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", device,
		    p->errbuf);
	else if (status == PCAP_ERROR_NO_SUCH_DEVICE ||
	    status == PCAP_ERROR_PERM_DENIED ||
	    status == PCAP_ERROR_PROMISC_PERM_DENIED)
		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s (%s)", device,
		    pcap_statustostr(status), p->errbuf);
	else
		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", device,
		    pcap_statustostr(status));
	pcap_close(p);
	return (NULL);
}

pcap_t *
pcap_open_offline_common(char *ebuf, size_t size)
{
	pcap_t *p;

	p = pcap_alloc_pcap_t(ebuf, size);
	if (p == NULL)
		return (NULL);

	p->opt.tstamp_precision = PCAP_TSTAMP_PRECISION_MICRO;

	return (p);
}

int
pcap_dispatch(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
{
	return (p->read_op(p, cnt, callback, user));
}

int
pcap_loop(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
{
	register int n;

	for (;;) {
		if (p->rfile != NULL) {
			/*
			 * 0 means EOF, so don't loop if we get 0.
			 */
			n = pcap_offline_read(p, cnt, callback, user);
		} else {
			/*
			 * XXX keep reading until we get something
			 * (or an error occurs)
			 */
			do {
				n = p->read_op(p, cnt, callback, user);
			} while (n == 0);
		}
		if (n <= 0)
			return (n);
		if (!PACKET_COUNT_IS_UNLIMITED(cnt)) {
			cnt -= n;
			if (cnt <= 0)
				return (0);
		}
	}
}

/*
 * Force the loop in "pcap_read()" or "pcap_read_offline()" to terminate.
 */
void
pcap_breakloop(pcap_t *p)
{
	p->break_loop = 1;
}

int
pcap_datalink(pcap_t *p)
{
	if (!p->activated)
		return (PCAP_ERROR_NOT_ACTIVATED);
	return (p->linktype);
}

int
pcap_datalink_ext(pcap_t *p)
{
	if (!p->activated)
		return (PCAP_ERROR_NOT_ACTIVATED);
	return (p->linktype_ext);
}

int
pcap_list_datalinks(pcap_t *p, int **dlt_buffer)
{
	if (!p->activated)
		return (PCAP_ERROR_NOT_ACTIVATED);
	if (p->dlt_count == 0) {
		/*
		 * We couldn't fetch the list of DLTs, which means
		 * this platform doesn't support changing the
		 * DLT for an interface.  Return a list of DLTs
		 * containing only the DLT this device supports.
		 */
		*dlt_buffer = (int*)malloc(sizeof(**dlt_buffer));
		if (*dlt_buffer == NULL) {
			pcap_fmt_errmsg_for_errno(p->errbuf, sizeof(p->errbuf),
			    errno, "malloc");
			return (PCAP_ERROR);
		}
		**dlt_buffer = p->linktype;
		return (1);
	} else {
		*dlt_buffer = (int*)calloc(sizeof(**dlt_buffer), p->dlt_count);
		if (*dlt_buffer == NULL) {
			pcap_fmt_errmsg_for_errno(p->errbuf, sizeof(p->errbuf),
			    errno, "malloc");
			return (PCAP_ERROR);
		}
		(void)memcpy(*dlt_buffer, p->dlt_list,
		    sizeof(**dlt_buffer) * p->dlt_count);
		return (p->dlt_count);
	}
}

/*
 * In Windows, you might have a library built with one version of the
 * C runtime library and an application built with another version of
 * the C runtime library, which means that the library might use one
 * version of malloc() and free() and the application might use another
 * version of malloc() and free().  If so, that means something
 * allocated by the library cannot be freed by the application, so we
 * need to have a pcap_free_datalinks() routine to free up the list
 * allocated by pcap_list_datalinks(), even though it's just a wrapper
 * around free().
 */
void
pcap_free_datalinks(int *dlt_list)
{
	free(dlt_list);
}

int
pcap_set_datalink(pcap_t *p, int dlt)
{
	int i;
	const char *dlt_name;

	if (dlt < 0)
		goto unsupported;

	if (p->dlt_count == 0 || p->set_datalink_op == NULL) {
		/*
		 * We couldn't fetch the list of DLTs, or we don't
		 * have a "set datalink" operation, which means
		 * this platform doesn't support changing the
		 * DLT for an interface.  Check whether the new
		 * DLT is the one this interface supports.
		 */
		if (p->linktype != dlt)
			goto unsupported;

		/*
		 * It is, so there's nothing we need to do here.
		 */
		return (0);
	}
	for (i = 0; i < p->dlt_count; i++)
		if (p->dlt_list[i] == (u_int)dlt)
			break;
	if (i >= p->dlt_count)
		goto unsupported;
	if (p->dlt_count == 2 && p->dlt_list[0] == DLT_EN10MB &&
	    dlt == DLT_DOCSIS) {
		/*
		 * This is presumably an Ethernet device, as the first
		 * link-layer type it offers is DLT_EN10MB, and the only
		 * other type it offers is DLT_DOCSIS.  That means that
		 * we can't tell the driver to supply DOCSIS link-layer
		 * headers - we're just pretending that's what we're
		 * getting, as, presumably, we're capturing on a dedicated
		 * link to a Cisco Cable Modem Termination System, and
		 * it's putting raw DOCSIS frames on the wire inside low-level
		 * Ethernet framing.
		 */
		p->linktype = dlt;
		return (0);
	}
	if (p->set_datalink_op(p, dlt) == -1)
		return (-1);
	p->linktype = dlt;
	return (0);

unsupported:
	dlt_name = pcap_datalink_val_to_name(dlt);
	if (dlt_name != NULL) {
		(void) pcap_snprintf(p->errbuf, sizeof(p->errbuf),
		    "%s is not one of the DLTs supported by this device",
		    dlt_name);
	} else {
		(void) pcap_snprintf(p->errbuf, sizeof(p->errbuf),
		    "DLT %d is not one of the DLTs supported by this device",
		    dlt);
	}
	return (-1);
}

/*
 * This array is designed for mapping upper and lower case letter
 * together for a case independent comparison.  The mappings are
 * based upon ascii character sequences.
 */
static const u_char charmap[] = {
	(u_char)'\000', (u_char)'\001', (u_char)'\002', (u_char)'\003',
	(u_char)'\004', (u_char)'\005', (u_char)'\006', (u_char)'\007',
	(u_char)'\010', (u_char)'\011', (u_char)'\012', (u_char)'\013',
	(u_char)'\014', (u_char)'\015', (u_char)'\016', (u_char)'\017',
	(u_char)'\020', (u_char)'\021', (u_char)'\022', (u_char)'\023',
	(u_char)'\024', (u_char)'\025', (u_char)'\026', (u_char)'\027',
	(u_char)'\030', (u_char)'\031', (u_char)'\032', (u_char)'\033',
	(u_char)'\034', (u_char)'\035', (u_char)'\036', (u_char)'\037',
	(u_char)'\040', (u_char)'\041', (u_char)'\042', (u_char)'\043',
	(u_char)'\044', (u_char)'\045', (u_char)'\046', (u_char)'\047',
	(u_char)'\050', (u_char)'\051', (u_char)'\052', (u_char)'\053',
	(u_char)'\054', (u_char)'\055', (u_char)'\056', (u_char)'\057',
	(u_char)'\060', (u_char)'\061', (u_char)'\062', (u_char)'\063',
	(u_char)'\064', (u_char)'\065', (u_char)'\066', (u_char)'\067',
	(u_char)'\070', (u_char)'\071', (u_char)'\072', (u_char)'\073',
	(u_char)'\074', (u_char)'\075', (u_char)'\076', (u_char)'\077',
	(u_char)'\100', (u_char)'\141', (u_char)'\142', (u_char)'\143',
	(u_char)'\144', (u_char)'\145', (u_char)'\146', (u_char)'\147',
	(u_char)'\150', (u_char)'\151', (u_char)'\152', (u_char)'\153',
	(u_char)'\154', (u_char)'\155', (u_char)'\156', (u_char)'\157',
	(u_char)'\160', (u_char)'\161', (u_char)'\162', (u_char)'\163',
	(u_char)'\164', (u_char)'\165', (u_char)'\166', (u_char)'\167',
	(u_char)'\170', (u_char)'\171', (u_char)'\172', (u_char)'\133',
	(u_char)'\134', (u_char)'\135', (u_char)'\136', (u_char)'\137',
	(u_char)'\140', (u_char)'\141', (u_char)'\142', (u_char)'\143',
	(u_char)'\144', (u_char)'\145', (u_char)'\146', (u_char)'\147',
	(u_char)'\150', (u_char)'\151', (u_char)'\152', (u_char)'\153',
	(u_char)'\154', (u_char)'\155', (u_char)'\156', (u_char)'\157',
	(u_char)'\160', (u_char)'\161', (u_char)'\162', (u_char)'\163',
	(u_char)'\164', (u_char)'\165', (u_char)'\166', (u_char)'\167',
	(u_char)'\170', (u_char)'\171', (u_char)'\172', (u_char)'\173',
	(u_char)'\174', (u_char)'\175', (u_char)'\176', (u_char)'\177',
	(u_char)'\200', (u_char)'\201', (u_char)'\202', (u_char)'\203',
	(u_char)'\204', (u_char)'\205', (u_char)'\206', (u_char)'\207',
	(u_char)'\210', (u_char)'\211', (u_char)'\212', (u_char)'\213',
	(u_char)'\214', (u_char)'\215', (u_char)'\216', (u_char)'\217',
	(u_char)'\220', (u_char)'\221', (u_char)'\222', (u_char)'\223',
	(u_char)'\224', (u_char)'\225', (u_char)'\226', (u_char)'\227',
	(u_char)'\230', (u_char)'\231', (u_char)'\232', (u_char)'\233',
	(u_char)'\234', (u_char)'\235', (u_char)'\236', (u_char)'\237',
	(u_char)'\240', (u_char)'\241', (u_char)'\242', (u_char)'\243',
	(u_char)'\244', (u_char)'\245', (u_char)'\246', (u_char)'\247',
	(u_char)'\250', (u_char)'\251', (u_char)'\252', (u_char)'\253',
	(u_char)'\254', (u_char)'\255', (u_char)'\256', (u_char)'\257',
	(u_char)'\260', (u_char)'\261', (u_char)'\262', (u_char)'\263',
	(u_char)'\264', (u_char)'\265', (u_char)'\266', (u_char)'\267',
	(u_char)'\270', (u_char)'\271', (u_char)'\272', (u_char)'\273',
	(u_char)'\274', (u_char)'\275', (u_char)'\276', (u_char)'\277',
	(u_char)'\300', (u_char)'\341', (u_char)'\342', (u_char)'\343',
	(u_char)'\344', (u_char)'\345', (u_char)'\346', (u_char)'\347',
	(u_char)'\350', (u_char)'\351', (u_char)'\352', (u_char)'\353',
	(u_char)'\354', (u_char)'\355', (u_char)'\356', (u_char)'\357',
	(u_char)'\360', (u_char)'\361', (u_char)'\362', (u_char)'\363',
	(u_char)'\364', (u_char)'\365', (u_char)'\366', (u_char)'\367',
	(u_char)'\370', (u_char)'\371', (u_char)'\372', (u_char)'\333',
	(u_char)'\334', (u_char)'\335', (u_char)'\336', (u_char)'\337',
	(u_char)'\340', (u_char)'\341', (u_char)'\342', (u_char)'\343',
	(u_char)'\344', (u_char)'\345', (u_char)'\346', (u_char)'\347',
	(u_char)'\350', (u_char)'\351', (u_char)'\352', (u_char)'\353',
	(u_char)'\354', (u_char)'\355', (u_char)'\356', (u_char)'\357',
	(u_char)'\360', (u_char)'\361', (u_char)'\362', (u_char)'\363',
	(u_char)'\364', (u_char)'\365', (u_char)'\366', (u_char)'\367',
	(u_char)'\370', (u_char)'\371', (u_char)'\372', (u_char)'\373',
	(u_char)'\374', (u_char)'\375', (u_char)'\376', (u_char)'\377',
};

int
pcap_strcasecmp(const char *s1, const char *s2)
{
	register const u_char	*cm = charmap,
				*us1 = (const u_char *)s1,
				*us2 = (const u_char *)s2;

	while (cm[*us1] == cm[*us2++])
		if (*us1++ == '\0')
			return(0);
	return (cm[*us1] - cm[*--us2]);
}

struct dlt_choice {
	const char *name;
	const char *description;
	int	dlt;
};

#define DLT_CHOICE(code, description) { #code, description, DLT_ ## code }
#define DLT_CHOICE_SENTINEL { NULL, NULL, 0 }

static struct dlt_choice dlt_choices[] = {
	DLT_CHOICE(NULL, "BSD loopback"),
	DLT_CHOICE(EN10MB, "Ethernet"),
	DLT_CHOICE(IEEE802, "Token ring"),
	DLT_CHOICE(ARCNET, "BSD ARCNET"),
	DLT_CHOICE(SLIP, "SLIP"),
	DLT_CHOICE(PPP, "PPP"),
	DLT_CHOICE(FDDI, "FDDI"),
	DLT_CHOICE(ATM_RFC1483, "RFC 1483 LLC-encapsulated ATM"),
	DLT_CHOICE(RAW, "Raw IP"),
	DLT_CHOICE(SLIP_BSDOS, "BSD/OS SLIP"),
	DLT_CHOICE(PPP_BSDOS, "BSD/OS PPP"),
	DLT_CHOICE(ATM_CLIP, "Linux Classical IP-over-ATM"),
	DLT_CHOICE(PPP_SERIAL, "PPP over serial"),
	DLT_CHOICE(PPP_ETHER, "PPPoE"),
	DLT_CHOICE(SYMANTEC_FIREWALL, "Symantec Firewall"),
	DLT_CHOICE(C_HDLC, "Cisco HDLC"),
	DLT_CHOICE(IEEE802_11, "802.11"),
	DLT_CHOICE(FRELAY, "Frame Relay"),
	DLT_CHOICE(LOOP, "OpenBSD loopback"),
	DLT_CHOICE(ENC, "OpenBSD encapsulated IP"),
	DLT_CHOICE(LINUX_SLL, "Linux cooked"),
	DLT_CHOICE(LTALK, "Localtalk"),
	DLT_CHOICE(PFLOG, "OpenBSD pflog file"),
	DLT_CHOICE(PFSYNC, "Packet filter state syncing"),
	DLT_CHOICE(PRISM_HEADER, "802.11 plus Prism header"),
	DLT_CHOICE(IP_OVER_FC, "RFC 2625 IP-over-Fibre Channel"),
	DLT_CHOICE(SUNATM, "Sun raw ATM"),
	DLT_CHOICE(IEEE802_11_RADIO, "802.11 plus radiotap header"),
	DLT_CHOICE(ARCNET_LINUX, "Linux ARCNET"),
	DLT_CHOICE(JUNIPER_MLPPP, "Juniper Multi-Link PPP"),
	DLT_CHOICE(JUNIPER_MLFR, "Juniper Multi-Link Frame Relay"),
	DLT_CHOICE(JUNIPER_ES, "Juniper Encryption Services PIC"),
	DLT_CHOICE(JUNIPER_GGSN, "Juniper GGSN PIC"),
	DLT_CHOICE(JUNIPER_MFR, "Juniper FRF.16 Frame Relay"),
	DLT_CHOICE(JUNIPER_ATM2, "Juniper ATM2 PIC"),
	DLT_CHOICE(JUNIPER_SERVICES, "Juniper Advanced Services PIC"),
	DLT_CHOICE(JUNIPER_ATM1, "Juniper ATM1 PIC"),
	DLT_CHOICE(APPLE_IP_OVER_IEEE1394, "Apple IP-over-IEEE 1394"),
	DLT_CHOICE(MTP2_WITH_PHDR, "SS7 MTP2 with Pseudo-header"),
	DLT_CHOICE(MTP2, "SS7 MTP2"),
	DLT_CHOICE(MTP3, "SS7 MTP3"),
	DLT_CHOICE(SCCP, "SS7 SCCP"),
	DLT_CHOICE(DOCSIS, "DOCSIS"),
	DLT_CHOICE(LINUX_IRDA, "Linux IrDA"),
	DLT_CHOICE(IEEE802_11_RADIO_AVS, "802.11 plus AVS radio information header"),
	DLT_CHOICE(JUNIPER_MONITOR, "Juniper Passive Monitor PIC"),
	DLT_CHOICE(BACNET_MS_TP, "BACnet MS/TP"),
	DLT_CHOICE(PPP_PPPD, "PPP for pppd, with direction flag"),
	DLT_CHOICE(JUNIPER_PPPOE, "Juniper PPPoE"),
	DLT_CHOICE(JUNIPER_PPPOE_ATM, "Juniper PPPoE/ATM"),
	DLT_CHOICE(GPRS_LLC, "GPRS LLC"),
	DLT_CHOICE(GPF_T, "GPF-T"),
	DLT_CHOICE(GPF_F, "GPF-F"),
	DLT_CHOICE(JUNIPER_PIC_PEER, "Juniper PIC Peer"),
	DLT_CHOICE(ERF_ETH,	"Ethernet with Endace ERF header"),
	DLT_CHOICE(ERF_POS, "Packet-over-SONET with Endace ERF header"),
	DLT_CHOICE(LINUX_LAPD, "Linux vISDN LAPD"),
	DLT_CHOICE(JUNIPER_ETHER, "Juniper Ethernet"),
	DLT_CHOICE(JUNIPER_PPP, "Juniper PPP"),
	DLT_CHOICE(JUNIPER_FRELAY, "Juniper Frame Relay"),
	DLT_CHOICE(JUNIPER_CHDLC, "Juniper C-HDLC"),
	DLT_CHOICE(MFR, "FRF.16 Frame Relay"),
	DLT_CHOICE(JUNIPER_VP, "Juniper Voice PIC"),
	DLT_CHOICE(A429, "Arinc 429"),
	DLT_CHOICE(A653_ICM, "Arinc 653 Interpartition Communication"),
	DLT_CHOICE(USB_FREEBSD, "USB with FreeBSD header"),
	DLT_CHOICE(BLUETOOTH_HCI_H4, "Bluetooth HCI UART transport layer"),
	DLT_CHOICE(IEEE802_16_MAC_CPS, "IEEE 802.16 MAC Common Part Sublayer"),
	DLT_CHOICE(USB_LINUX, "USB with Linux header"),
	DLT_CHOICE(CAN20B, "Controller Area Network (CAN) v. 2.0B"),
	DLT_CHOICE(IEEE802_15_4_LINUX, "IEEE 802.15.4 with Linux padding"),
	DLT_CHOICE(PPI, "Per-Packet Information"),
	DLT_CHOICE(IEEE802_16_MAC_CPS_RADIO, "IEEE 802.16 MAC Common Part Sublayer plus radiotap header"),
	DLT_CHOICE(JUNIPER_ISM, "Juniper Integrated Service Module"),
	DLT_CHOICE(IEEE802_15_4, "IEEE 802.15.4 with FCS"),
	DLT_CHOICE(SITA, "SITA pseudo-header"),
	DLT_CHOICE(ERF, "Endace ERF header"),
	DLT_CHOICE(RAIF1, "Ethernet with u10 Networks pseudo-header"),
	DLT_CHOICE(IPMB, "IPMB"),
	DLT_CHOICE(JUNIPER_ST, "Juniper Secure Tunnel"),
	DLT_CHOICE(BLUETOOTH_HCI_H4_WITH_PHDR, "Bluetooth HCI UART transport layer plus pseudo-header"),
	DLT_CHOICE(AX25_KISS, "AX.25 with KISS header"),
	DLT_CHOICE(IEEE802_15_4_NONASK_PHY, "IEEE 802.15.4 with non-ASK PHY data"),
	DLT_CHOICE(MPLS, "MPLS with label as link-layer header"),
	DLT_CHOICE(LINUX_EVDEV, "Linux evdev events"),
	DLT_CHOICE(USB_LINUX_MMAPPED, "USB with padded Linux header"),
	DLT_CHOICE(DECT, "DECT"),
	DLT_CHOICE(AOS, "AOS Space Data Link protocol"),
	DLT_CHOICE(WIHART, "Wireless HART"),
	DLT_CHOICE(FC_2, "Fibre Channel FC-2"),
	DLT_CHOICE(FC_2_WITH_FRAME_DELIMS, "Fibre Channel FC-2 with frame delimiters"),
	DLT_CHOICE(IPNET, "Solaris ipnet"),
	DLT_CHOICE(CAN_SOCKETCAN, "CAN-bus with SocketCAN headers"),
	DLT_CHOICE(IPV4, "Raw IPv4"),
	DLT_CHOICE(IPV6, "Raw IPv6"),
	DLT_CHOICE(IEEE802_15_4_NOFCS, "IEEE 802.15.4 without FCS"),
	DLT_CHOICE(DBUS, "D-Bus"),
	DLT_CHOICE(JUNIPER_VS, "Juniper Virtual Server"),
	DLT_CHOICE(JUNIPER_SRX_E2E, "Juniper SRX E2E"),
	DLT_CHOICE(JUNIPER_FIBRECHANNEL, "Juniper Fibre Channel"),
	DLT_CHOICE(DVB_CI, "DVB-CI"),
	DLT_CHOICE(MUX27010, "MUX27010"),
	DLT_CHOICE(STANAG_5066_D_PDU, "STANAG 5066 D_PDUs"),
	DLT_CHOICE(JUNIPER_ATM_CEMIC, "Juniper ATM CEMIC"),
	DLT_CHOICE(NFLOG, "Linux netfilter log messages"),
	DLT_CHOICE(NETANALYZER, "Ethernet with Hilscher netANALYZER pseudo-header"),
	DLT_CHOICE(NETANALYZER_TRANSPARENT, "Ethernet with Hilscher netANALYZER pseudo-header and with preamble and SFD"),
	DLT_CHOICE(IPOIB, "RFC 4391 IP-over-Infiniband"),
	DLT_CHOICE(MPEG_2_TS, "MPEG-2 transport stream"),
	DLT_CHOICE(NG40, "ng40 protocol tester Iub/Iur"),
	DLT_CHOICE(NFC_LLCP, "NFC LLCP PDUs with pseudo-header"),
	DLT_CHOICE(INFINIBAND, "InfiniBand"),
	DLT_CHOICE(SCTP, "SCTP"),
	DLT_CHOICE(USBPCAP, "USB with USBPcap header"),
	DLT_CHOICE(RTAC_SERIAL, "Schweitzer Engineering Laboratories RTAC packets"),
	DLT_CHOICE(BLUETOOTH_LE_LL, "Bluetooth Low Energy air interface"),
	DLT_CHOICE(NETLINK, "Linux netlink"),
	DLT_CHOICE(BLUETOOTH_LINUX_MONITOR, "Bluetooth Linux Monitor"),
	DLT_CHOICE(BLUETOOTH_BREDR_BB, "Bluetooth Basic Rate/Enhanced Data Rate baseband packets"),
	DLT_CHOICE(BLUETOOTH_LE_LL_WITH_PHDR, "Bluetooth Low Energy air interface with pseudo-header"),
	DLT_CHOICE(PROFIBUS_DL, "PROFIBUS data link layer"),
	DLT_CHOICE(PKTAP, "Apple DLT_PKTAP"),
	DLT_CHOICE(EPON, "Ethernet with 802.3 Clause 65 EPON preamble"),
	DLT_CHOICE(IPMI_HPM_2, "IPMI trace packets"),
	DLT_CHOICE(ZWAVE_R1_R2, "Z-Wave RF profile R1 and R2 packets"),
	DLT_CHOICE(ZWAVE_R3, "Z-Wave RF profile R3 packets"),
	DLT_CHOICE(WATTSTOPPER_DLM, "WattStopper Digital Lighting Management (DLM) and Legrand Nitoo Open protocol"),
	DLT_CHOICE(ISO_14443, "ISO 14443 messages"),
	DLT_CHOICE(RDS, "IEC 62106 Radio Data System groups"),
	DLT_CHOICE(USB_DARWIN, "USB with Darwin header"),
	DLT_CHOICE(OPENFLOW, "OpenBSD DLT_OPENFLOW"),
	DLT_CHOICE(SDLC, "IBM SDLC frames"),
	DLT_CHOICE(TI_LLN_SNIFFER, "TI LLN sniffer frames"),
	DLT_CHOICE(VSOCK, "Linux vsock"),
	DLT_CHOICE(NORDIC_BLE, "Nordic Semiconductor Bluetooth LE sniffer frames"),
	DLT_CHOICE(DOCSIS31_XRA31, "Excentis XRA-31 DOCSIS 3.1 RF sniffer frames"),
	DLT_CHOICE(ETHERNET_MPACKET, "802.3br mPackets"),
	DLT_CHOICE_SENTINEL
};

int
pcap_datalink_name_to_val(const char *name)
{
	int i;

	for (i = 0; dlt_choices[i].name != NULL; i++) {
		if (pcap_strcasecmp(dlt_choices[i].name, name) == 0)
			return (dlt_choices[i].dlt);
	}
	return (-1);
}

const char *
pcap_datalink_val_to_name(int dlt)
{
	int i;

	for (i = 0; dlt_choices[i].name != NULL; i++) {
		if (dlt_choices[i].dlt == dlt)
			return (dlt_choices[i].name);
	}
	return (NULL);
}

const char *
pcap_datalink_val_to_description(int dlt)
{
	int i;

	for (i = 0; dlt_choices[i].name != NULL; i++) {
		if (dlt_choices[i].dlt == dlt)
			return (dlt_choices[i].description);
	}
	return (NULL);
}

struct tstamp_type_choice {
	const char *name;
	const char *description;
	int	type;
};

static struct tstamp_type_choice tstamp_type_choices[] = {
	{ "host", "Host", PCAP_TSTAMP_HOST },
	{ "host_lowprec", "Host, low precision", PCAP_TSTAMP_HOST_LOWPREC },
	{ "host_hiprec", "Host, high precision", PCAP_TSTAMP_HOST_HIPREC },
	{ "adapter", "Adapter", PCAP_TSTAMP_ADAPTER },
	{ "adapter_unsynced", "Adapter, not synced with system time", PCAP_TSTAMP_ADAPTER_UNSYNCED },
	{ NULL, NULL, 0 }
};

int
pcap_tstamp_type_name_to_val(const char *name)
{
	int i;

	for (i = 0; tstamp_type_choices[i].name != NULL; i++) {
		if (pcap_strcasecmp(tstamp_type_choices[i].name, name) == 0)
			return (tstamp_type_choices[i].type);
	}
	return (PCAP_ERROR);
}

const char *
pcap_tstamp_type_val_to_name(int tstamp_type)
{
	int i;

	for (i = 0; tstamp_type_choices[i].name != NULL; i++) {
		if (tstamp_type_choices[i].type == tstamp_type)
			return (tstamp_type_choices[i].name);
	}
	return (NULL);
}

const char *
pcap_tstamp_type_val_to_description(int tstamp_type)
{
	int i;

	for (i = 0; tstamp_type_choices[i].name != NULL; i++) {
		if (tstamp_type_choices[i].type == tstamp_type)
			return (tstamp_type_choices[i].description);
	}
	return (NULL);
}

int
pcap_snapshot(pcap_t *p)
{
	if (!p->activated)
		return (PCAP_ERROR_NOT_ACTIVATED);
	return (p->snapshot);
}

int
pcap_is_swapped(pcap_t *p)
{
	if (!p->activated)
		return (PCAP_ERROR_NOT_ACTIVATED);
	return (p->swapped);
}

int
pcap_major_version(pcap_t *p)
{
	if (!p->activated)
		return (PCAP_ERROR_NOT_ACTIVATED);
	return (p->version_major);
}

int
pcap_minor_version(pcap_t *p)
{
	if (!p->activated)
		return (PCAP_ERROR_NOT_ACTIVATED);
	return (p->version_minor);
}

int
pcap_bufsize(pcap_t *p)
{
	if (!p->activated)
		return (PCAP_ERROR_NOT_ACTIVATED);
	return (p->bufsize);
}

FILE *
pcap_file(pcap_t *p)
{
	return (p->rfile);
}

int
pcap_fileno(pcap_t *p)
{
#ifndef _WIN32
	return (p->fd);
#else
	if (p->handle != INVALID_HANDLE_VALUE)
		return ((int)(DWORD)p->handle);
	else
		return (PCAP_ERROR);
#endif
}

#if !defined(_WIN32) && !defined(MSDOS)
int
pcap_get_selectable_fd(pcap_t *p)
{
	return (p->selectable_fd);
}
#endif

void
pcap_perror(pcap_t *p, const char *prefix)
{
	fprintf(stderr, "%s: %s\n", prefix, p->errbuf);
}

char *
pcap_geterr(pcap_t *p)
{
	return (p->errbuf);
}

int
pcap_getnonblock(pcap_t *p, char *errbuf)
{
	int ret;

	ret = p->getnonblock_op(p);
	if (ret == -1) {
		/*
		 * The get nonblock operation sets p->errbuf; this
		 * function *shouldn't* have had a separate errbuf
		 * argument, as it didn't need one, but I goofed
		 * when adding it.
		 *
		 * We copy the error message to errbuf, so callers
		 * can find it in either place.
		 */
		strlcpy(errbuf, p->errbuf, PCAP_ERRBUF_SIZE);
	}
	return (ret);
}

/*
 * Get the current non-blocking mode setting, under the assumption that
 * it's just the standard POSIX non-blocking flag.
 */
#if !defined(_WIN32) && !defined(MSDOS)
int
pcap_getnonblock_fd(pcap_t *p)
{
	int fdflags;

	fdflags = fcntl(p->fd, F_GETFL, 0);
	if (fdflags == -1) {
		pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE,
		    errno, "F_GETFL");
		return (-1);
	}
	if (fdflags & O_NONBLOCK)
		return (1);
	else
		return (0);
}
#endif

int
pcap_setnonblock(pcap_t *p, int nonblock, char *errbuf)
{
	int ret;

	ret = p->setnonblock_op(p, nonblock);
	if (ret == -1) {
		/*
		 * The set nonblock operation sets p->errbuf; this
		 * function *shouldn't* have had a separate errbuf
		 * argument, as it didn't need one, but I goofed
		 * when adding it.
		 *
		 * We copy the error message to errbuf, so callers
		 * can find it in either place.
		 */
		strlcpy(errbuf, p->errbuf, PCAP_ERRBUF_SIZE);
	}
	return (ret);
}

#if !defined(_WIN32) && !defined(MSDOS)
/*
 * Set non-blocking mode, under the assumption that it's just the
 * standard POSIX non-blocking flag.  (This can be called by the
 * per-platform non-blocking-mode routine if that routine also
 * needs to do some additional work.)
 */
int
pcap_setnonblock_fd(pcap_t *p, int nonblock)
{
	int fdflags;

	fdflags = fcntl(p->fd, F_GETFL, 0);
	if (fdflags == -1) {
		pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE,
		    errno, "F_GETFL");
		return (-1);
	}
	if (nonblock)
		fdflags |= O_NONBLOCK;
	else
		fdflags &= ~O_NONBLOCK;
	if (fcntl(p->fd, F_SETFL, fdflags) == -1) {
		pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE,
		    errno, "F_SETFL");
		return (-1);
	}
	return (0);
}
#endif

#ifdef _WIN32
/*
 * Generate a string for a Win32-specific error (i.e. an error generated when
 * calling a Win32 API).
 * For errors occurred during standard C calls, we still use pcap_strerror()
 */
void
pcap_win32_err_to_str(DWORD error, char *errbuf)
{
	size_t errlen;
	char *p;

	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM, NULL, error, 0, errbuf,
	    PCAP_ERRBUF_SIZE, NULL);

	/*
	 * "FormatMessage()" "helpfully" sticks CR/LF at the end of the
	 * message.  Get rid of it.
	 */
	errlen = strlen(errbuf);
	if (errlen >= 2) {
		errbuf[errlen - 1] = '\0';
		errbuf[errlen - 2] = '\0';
	}
	p = strchr(errbuf, '\0');
	pcap_snprintf (p, PCAP_ERRBUF_SIZE+1-(p-errbuf), " (%lu)", error);
}
#endif

/*
 * Generate error strings for PCAP_ERROR_ and PCAP_WARNING_ values.
 */
const char *
pcap_statustostr(int errnum)
{
	static char ebuf[15+10+1];

	switch (errnum) {

	case PCAP_WARNING:
		return("Generic warning");

	case PCAP_WARNING_TSTAMP_TYPE_NOTSUP:
		return ("That type of time stamp is not supported by that device");

	case PCAP_WARNING_PROMISC_NOTSUP:
		return ("That device doesn't support promiscuous mode");

	case PCAP_ERROR:
		return("Generic error");

	case PCAP_ERROR_BREAK:
		return("Loop terminated by pcap_breakloop");

	case PCAP_ERROR_NOT_ACTIVATED:
		return("The pcap_t has not been activated");

	case PCAP_ERROR_ACTIVATED:
		return ("The setting can't be changed after the pcap_t is activated");

	case PCAP_ERROR_NO_SUCH_DEVICE:
		return ("No such device exists");

	case PCAP_ERROR_RFMON_NOTSUP:
		return ("That device doesn't support monitor mode");

	case PCAP_ERROR_NOT_RFMON:
		return ("That operation is supported only in monitor mode");

	case PCAP_ERROR_PERM_DENIED:
		return ("You don't have permission to capture on that device");

	case PCAP_ERROR_IFACE_NOT_UP:
		return ("That device is not up");

	case PCAP_ERROR_CANTSET_TSTAMP_TYPE:
		return ("That device doesn't support setting the time stamp type");

	case PCAP_ERROR_PROMISC_PERM_DENIED:
		return ("You don't have permission to capture in promiscuous mode on that device");

	case PCAP_ERROR_TSTAMP_PRECISION_NOTSUP:
		return ("That device doesn't support that time stamp precision");
	}
	(void)pcap_snprintf(ebuf, sizeof ebuf, "Unknown error: %d", errnum);
	return(ebuf);
}

/*
 * Not all systems have strerror().
 */
const char *
pcap_strerror(int errnum)
{
#ifdef HAVE_STRERROR
#ifdef _WIN32
	static char errbuf[PCAP_ERRBUF_SIZE];
	errno_t err = strerror_s(errbuf, PCAP_ERRBUF_SIZE, errnum);

	if (err != 0) /* err = 0 if successful */
		strlcpy(errbuf, "strerror_s() error", PCAP_ERRBUF_SIZE);
	return (errbuf);
#else
	return (strerror(errnum));
#endif /* _WIN32 */
#else
	extern int sys_nerr;
	extern const char *const sys_errlist[];
	static char errbuf[PCAP_ERRBUF_SIZE];

	if ((unsigned int)errnum < sys_nerr)
		return ((char *)sys_errlist[errnum]);
	(void)pcap_snprintf(errbuf, sizeof errbuf, "Unknown error: %d", errnum);
	return (errbuf);
#endif
}

int
pcap_setfilter(pcap_t *p, struct bpf_program *fp)
{
	return (p->setfilter_op(p, fp));
}

/*
 * Set direction flag, which controls whether we accept only incoming
 * packets, only outgoing packets, or both.
 * Note that, depending on the platform, some or all direction arguments
 * might not be supported.
 */
int
pcap_setdirection(pcap_t *p, pcap_direction_t d)
{
	if (p->setdirection_op == NULL) {
		pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
		    "Setting direction is not implemented on this platform");
		return (-1);
	} else
		return (p->setdirection_op(p, d));
}

int
pcap_stats(pcap_t *p, struct pcap_stat *ps)
{
	return (p->stats_op(p, ps));
}

static int
pcap_stats_dead(pcap_t *p, struct pcap_stat *ps _U_)
{
	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
	    "Statistics aren't available from a pcap_open_dead pcap_t");
	return (-1);
}

#ifdef _WIN32
struct pcap_stat *
pcap_stats_ex(pcap_t *p, int *pcap_stat_size)
{
	return (p->stats_ex_op(p, pcap_stat_size));
}

int
pcap_setbuff(pcap_t *p, int dim)
{
	return (p->setbuff_op(p, dim));
}

static int
pcap_setbuff_dead(pcap_t *p, int dim)
{
	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
	    "The kernel buffer size cannot be set on a pcap_open_dead pcap_t");
	return (-1);
}

int
pcap_setmode(pcap_t *p, int mode)
{
	return (p->setmode_op(p, mode));
}

static int
pcap_setmode_dead(pcap_t *p, int mode)
{
	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
	    "impossible to set mode on a pcap_open_dead pcap_t");
	return (-1);
}

int
pcap_setmintocopy(pcap_t *p, int size)
{
	return (p->setmintocopy_op(p, size));
}

static int
pcap_setmintocopy_dead(pcap_t *p, int size)
{
	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
	    "The mintocopy parameter cannot be set on a pcap_open_dead pcap_t");
	return (-1);
}

HANDLE
pcap_getevent(pcap_t *p)
{
	return (p->getevent_op(p));
}

static HANDLE
pcap_getevent_dead(pcap_t *p)
{
	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
	    "A pcap_open_dead pcap_t has no event handle");
	return (INVALID_HANDLE_VALUE);
}

int
pcap_oid_get_request(pcap_t *p, bpf_u_int32 oid, void *data, size_t *lenp)
{
	return (p->oid_get_request_op(p, oid, data, lenp));
}

static int
pcap_oid_get_request_dead(pcap_t *p, bpf_u_int32 oid _U_, void *data _U_,
    size_t *lenp _U_)
{
	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
	    "An OID get request cannot be performed on a pcap_open_dead pcap_t");
	return (PCAP_ERROR);
}

int
pcap_oid_set_request(pcap_t *p, bpf_u_int32 oid, const void *data, size_t *lenp)
{
	return (p->oid_set_request_op(p, oid, data, lenp));
}

static int
pcap_oid_set_request_dead(pcap_t *p, bpf_u_int32 oid _U_, const void *data _U_,
    size_t *lenp _U_)
{
	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
	    "An OID set request cannot be performed on a pcap_open_dead pcap_t");
	return (PCAP_ERROR);
}

pcap_send_queue *
pcap_sendqueue_alloc(u_int memsize)
{
	pcap_send_queue *tqueue;

	/* Allocate the queue */
	tqueue = (pcap_send_queue *)malloc(sizeof(pcap_send_queue));
	if (tqueue == NULL){
		return (NULL);
	}

	/* Allocate the buffer */
	tqueue->buffer = (char *)malloc(memsize);
	if (tqueue->buffer == NULL) {
		free(tqueue);
		return (NULL);
	}

	tqueue->maxlen = memsize;
	tqueue->len = 0;

	return (tqueue);
}

void
pcap_sendqueue_destroy(pcap_send_queue *queue)
{
	free(queue->buffer);
	free(queue);
}

int
pcap_sendqueue_queue(pcap_send_queue *queue, const struct pcap_pkthdr *pkt_header, const u_char *pkt_data)
{
	if (queue->len + sizeof(struct pcap_pkthdr) + pkt_header->caplen > queue->maxlen){
		return (-1);
	}

	/* Copy the pcap_pkthdr header*/
	memcpy(queue->buffer + queue->len, pkt_header, sizeof(struct pcap_pkthdr));
	queue->len += sizeof(struct pcap_pkthdr);

	/* copy the packet */
	memcpy(queue->buffer + queue->len, pkt_data, pkt_header->caplen);
	queue->len += pkt_header->caplen;

	return (0);
}

u_int
pcap_sendqueue_transmit(pcap_t *p, pcap_send_queue *queue, int sync)
{
	return (p->sendqueue_transmit_op(p, queue, sync));
}

static u_int
pcap_sendqueue_transmit_dead(pcap_t *p, pcap_send_queue *queue, int sync)
{
	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
	    "Packets cannot be transmitted on a pcap_open_dead pcap_t");
	return (0);
}

int
pcap_setuserbuffer(pcap_t *p, int size)
{
	return (p->setuserbuffer_op(p, size));
}

static int
pcap_setuserbuffer_dead(pcap_t *p, int size)
{
	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
	    "The user buffer cannot be set on a pcap_open_dead pcap_t");
	return (-1);
}

int
pcap_live_dump(pcap_t *p, char *filename, int maxsize, int maxpacks)
{
	return (p->live_dump_op(p, filename, maxsize, maxpacks));
}

static int
pcap_live_dump_dead(pcap_t *p, char *filename, int maxsize, int maxpacks)
{
	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
	    "Live packet dumping cannot be performed on a pcap_open_dead pcap_t");
	return (-1);
}

int
pcap_live_dump_ended(pcap_t *p, int sync)
{
	return (p->live_dump_ended_op(p, sync));
}

static int
pcap_live_dump_ended_dead(pcap_t *p, int sync)
{
	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
	    "Live packet dumping cannot be performed on a pcap_open_dead pcap_t");
	return (-1);
}

PAirpcapHandle
pcap_get_airpcap_handle(pcap_t *p)
{
	PAirpcapHandle handle;

	handle = p->get_airpcap_handle_op(p);
	if (handle == NULL) {
		(void)pcap_snprintf(p->errbuf, sizeof(p->errbuf),
		    "This isn't an AirPcap device");
	}
	return (handle);
}

static PAirpcapHandle
pcap_get_airpcap_handle_dead(pcap_t *p)
{
	return (NULL);
}
#endif

/*
 * On some platforms, we need to clean up promiscuous or monitor mode
 * when we close a device - and we want that to happen even if the
 * application just exits without explicitl closing devices.
 * On those platforms, we need to register a "close all the pcaps"
 * routine to be called when we exit, and need to maintain a list of
 * pcaps that need to be closed to clean up modes.
 *
 * XXX - not thread-safe.
 */

/*
 * List of pcaps on which we've done something that needs to be
 * cleaned up.
 * If there are any such pcaps, we arrange to call "pcap_close_all()"
 * when we exit, and have it close all of them.
 */
static struct pcap *pcaps_to_close;

/*
 * TRUE if we've already called "atexit()" to cause "pcap_close_all()" to
 * be called on exit.
 */
static int did_atexit;

static void
pcap_close_all(void)
{
	struct pcap *handle;

	while ((handle = pcaps_to_close) != NULL)
		pcap_close(handle);
}

int
pcap_do_addexit(pcap_t *p)
{
	/*
	 * If we haven't already done so, arrange to have
	 * "pcap_close_all()" called when we exit.
	 */
	if (!did_atexit) {
		if (atexit(pcap_close_all) != 0) {
			/*
			 * "atexit()" failed; let our caller know.
			 */
			strlcpy(p->errbuf, "atexit failed", PCAP_ERRBUF_SIZE);
			return (0);
		}
		did_atexit = 1;
	}
	return (1);
}

void
pcap_add_to_pcaps_to_close(pcap_t *p)
{
	p->next = pcaps_to_close;
	pcaps_to_close = p;
}

void
pcap_remove_from_pcaps_to_close(pcap_t *p)
{
	pcap_t *pc, *prevpc;

	for (pc = pcaps_to_close, prevpc = NULL; pc != NULL;
	    prevpc = pc, pc = pc->next) {
		if (pc == p) {
			/*
			 * Found it.  Remove it from the list.
			 */
			if (prevpc == NULL) {
				/*
				 * It was at the head of the list.
				 */
				pcaps_to_close = pc->next;
			} else {
				/*
				 * It was in the middle of the list.
				 */
				prevpc->next = pc->next;
			}
			break;
		}
	}
}

void
pcap_cleanup_live_common(pcap_t *p)
{
	if (p->buffer != NULL) {
		free(p->buffer);
		p->buffer = NULL;
	}
	if (p->dlt_list != NULL) {
		free(p->dlt_list);
		p->dlt_list = NULL;
		p->dlt_count = 0;
	}
	if (p->tstamp_type_list != NULL) {
		free(p->tstamp_type_list);
		p->tstamp_type_list = NULL;
		p->tstamp_type_count = 0;
	}
	if (p->tstamp_precision_list != NULL) {
		free(p->tstamp_precision_list);
		p->tstamp_precision_list = NULL;
		p->tstamp_precision_count = 0;
	}
	pcap_freecode(&p->fcode);
#if !defined(_WIN32) && !defined(MSDOS)
	if (p->fd >= 0) {
		close(p->fd);
		p->fd = -1;
	}
	p->selectable_fd = -1;
#endif
}

static void
pcap_cleanup_dead(pcap_t *p _U_)
{
	/* Nothing to do. */
}

pcap_t *
pcap_open_dead_with_tstamp_precision(int linktype, int snaplen, u_int precision)
{
	pcap_t *p;

	switch (precision) {

	case PCAP_TSTAMP_PRECISION_MICRO:
	case PCAP_TSTAMP_PRECISION_NANO:
		break;

	default:
		return NULL;
	}
	p = malloc(sizeof(*p));
	if (p == NULL)
		return NULL;
	memset (p, 0, sizeof(*p));
	p->snapshot = snaplen;
	p->linktype = linktype;
	p->opt.tstamp_precision = precision;
	p->stats_op = pcap_stats_dead;
#ifdef _WIN32
	p->stats_ex_op = (stats_ex_op_t)pcap_not_initialized_ptr;
	p->setbuff_op = pcap_setbuff_dead;
	p->setmode_op = pcap_setmode_dead;
	p->setmintocopy_op = pcap_setmintocopy_dead;
	p->getevent_op = pcap_getevent_dead;
	p->oid_get_request_op = pcap_oid_get_request_dead;
	p->oid_set_request_op = pcap_oid_set_request_dead;
	p->sendqueue_transmit_op = pcap_sendqueue_transmit_dead;
	p->setuserbuffer_op = pcap_setuserbuffer_dead;
	p->live_dump_op = pcap_live_dump_dead;
	p->live_dump_ended_op = pcap_live_dump_ended_dead;
	p->get_airpcap_handle_op = pcap_get_airpcap_handle_dead;
#endif
	p->cleanup_op = pcap_cleanup_dead;

	/*
	 * A "dead" pcap_t never requires special BPF code generation.
	 */
	p->bpf_codegen_flags = 0;

	p->activated = 1;
	return (p);
}

pcap_t *
pcap_open_dead(int linktype, int snaplen)
{
	return (pcap_open_dead_with_tstamp_precision(linktype, snaplen,
	    PCAP_TSTAMP_PRECISION_MICRO));
}

/*
 * API compatible with WinPcap's "send a packet" routine - returns -1
 * on error, 0 otherwise.
 *
 * XXX - what if we get a short write?
 */
int
pcap_sendpacket(pcap_t *p, const u_char *buf, int size)
{
	if (p->inject_op(p, buf, size) == -1)
		return (-1);
	return (0);
}

/*
 * API compatible with OpenBSD's "send a packet" routine - returns -1 on
 * error, number of bytes written otherwise.
 */
int
pcap_inject(pcap_t *p, const void *buf, size_t size)
{
	return (p->inject_op(p, buf, size));
}

void
pcap_close(pcap_t *p)
{
	if (p->opt.device != NULL)
		free(p->opt.device);
	p->cleanup_op(p);
	free(p);
}

/*
 * Given a BPF program, a pcap_pkthdr structure for a packet, and the raw
 * data for the packet, check whether the packet passes the filter.
 * Returns the return value of the filter program, which will be zero if
 * the packet doesn't pass and non-zero if the packet does pass.
 */
int
pcap_offline_filter(const struct bpf_program *fp, const struct pcap_pkthdr *h,
    const u_char *pkt)
{
	const struct bpf_insn *fcode = fp->bf_insns;

	if (fcode != NULL)
		return (bpf_filter(fcode, pkt, h->len, h->caplen));
	else
		return (0);
}

#ifdef YYDEBUG
/*
 * Set the internal "debug printout" flag for the filter expression parser.
 * The code to print that stuff is present only if YYDEBUG is defined, so
 * the flag, and the routine to set it, are defined only if YYDEBUG is
 * defined.
 *
 * This is intended for libpcap developers, not for general use.
 * If you want to set these in a program, you'll have to declare this
 * routine yourself, with the appropriate DLL import attribute on Windows;
 * it's not declared in any header file, and won't be declared in any
 * header file provided by libpcap.
 */
PCAP_API void pcap_set_parser_debug(int value);

PCAP_API_DEF void
pcap_set_parser_debug(int value)
{
	extern int pcap_debug;

	pcap_debug = value;
}
#endif

#ifdef BDEBUG
/*
 * Set the internal "debug printout" flag for the filter expression optimizer.
 * The code to print that stuff is present only if BDEBUG is defined, so
 * the flag, and the routine to set it, are defined only if BDEBUG is
 * defined.
 *
 * This is intended for libpcap developers, not for general use.
 * If you want to set these in a program, you'll have to declare this
 * routine yourself, with the appropriate DLL import attribute on Windows;
 * it's not declared in any header file, and won't be declared in any
 * header file provided by libpcap.
 */
PCAP_API void pcap_set_optimizer_debug(int value);

PCAP_API_DEF void
pcap_set_optimizer_debug(int value)
{
	extern int pcap_optimizer_debug;

	pcap_optimizer_debug = value;
}
#endif