- get rid of cruft.

1 files changed, 0 insertions, 1400 deletions

diff --git a/Makefile b/Makefile
deleted file mode 100644
index 58b0356..0000000
--- a/Makefile
+++ /dev/null
@@ -1,1400 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# Makefile.  Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-# Makefile for popt library.
-
-
-
-
-pkgdatadir = $(datadir)/popt
-pkgincludedir = $(includedir)/popt
-pkglibdir = $(libdir)/popt
-pkglibexecdir = $(libexecdir)/popt
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = x86_64-unknown-linux-gnu
-host_triplet = x86_64-unknown-linux-gnu
-check_PROGRAMS = test1$(EXEEXT) test2$(EXEEXT) tdict$(EXEEXT) \
-	test3$(EXEEXT)
-am__append_1 = -Wl,--version-script,./libpopt.vers
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(dist_man_MANS) \
-	$(include_HEADERS) $(noinst_HEADERS) $(srcdir)/Doxyfile.in \
-	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/config.h.in $(srcdir)/popt.pc.in \
-	$(srcdir)/popt.spec.in $(top_srcdir)/configure ABOUT-NLS \
-	COPYING build-aux/config.guess build-aux/config.rpath \
-	build-aux/config.sub build-aux/depcomp build-aux/install-sh \
-	build-aux/ltmain.sh build-aux/missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
-	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
-	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
-	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
-	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
-	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
-	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
-	$(top_srcdir)/m4/popt.m4 $(top_srcdir)/m4/progtest.m4 \
-	$(top_srcdir)/m4/xx.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = Doxyfile popt.pc popt.spec
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(usrlibdir)" "$(DESTDIR)$(man3dir)" \
-	"$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(poptaliasdir)" \
-	"$(DESTDIR)$(includedir)"
-LTLIBRARIES = $(usrlib_LTLIBRARIES)
-libpopt_la_LIBADD =
-am_libpopt_la_OBJECTS = popt.lo poptparse.lo poptconfig.lo popthelp.lo \
-	poptint.lo
-libpopt_la_OBJECTS = $(am_libpopt_la_OBJECTS)
-libpopt_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libpopt_la_LDFLAGS) $(LDFLAGS) -o $@
-tdict_SOURCES = tdict.c
-tdict_OBJECTS = tdict-tdict.$(OBJEXT)
-tdict_DEPENDENCIES = $(top_builddir)/$(usrlib_LTLIBRARIES)
-tdict_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(tdict_CFLAGS) $(CFLAGS) $(tdict_LDFLAGS) \
-	$(LDFLAGS) -o $@
-test1_SOURCES = test1.c
-test1_OBJECTS = test1-test1.$(OBJEXT)
-test1_DEPENDENCIES = $(top_builddir)/$(usrlib_LTLIBRARIES)
-test1_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(test1_CFLAGS) $(CFLAGS) $(test1_LDFLAGS) \
-	$(LDFLAGS) -o $@
-test2_SOURCES = test2.c
-test2_OBJECTS = test2-test2.$(OBJEXT)
-test2_DEPENDENCIES = $(top_builddir)/$(usrlib_LTLIBRARIES)
-test2_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(test2_CFLAGS) $(CFLAGS) $(test2_LDFLAGS) \
-	$(LDFLAGS) -o $@
-test3_SOURCES = test3.c
-test3_OBJECTS = test3-test3.$(OBJEXT)
-test3_DEPENDENCIES = $(top_builddir)/$(usrlib_LTLIBRARIES)
-test3_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(test3_CFLAGS) $(CFLAGS) $(test3_LDFLAGS) \
-	$(LDFLAGS) -o $@
-DEFAULT_INCLUDES = -I.
-depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
-	$(LDFLAGS) -o $@
-SOURCES = $(libpopt_la_SOURCES) tdict.c test1.c test2.c test3.c
-DIST_SOURCES = $(libpopt_la_SOURCES) tdict.c test1.c test2.c test3.c
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
-man3dir = $(mandir)/man3
-NROFF = nroff
-MANS = $(dist_man_MANS)
-DATA = $(pkgconfig_DATA) $(poptalias_DATA)
-HEADERS = $(include_HEADERS) $(noinst_HEADERS)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir dist dist-all distcheck
-ETAGS = etags
-CTAGS = ctags
-# If stdout is a non-dumb tty, use colors.  If test -t is not supported,
-# then this fails; a conservative approach.  Of course do not redirect
-# stdout here, just stderr.
-am__tty_colors = \
-red=; grn=; lgn=; blu=; std=; \
-test "X$(AM_COLOR_TESTS)" != Xno \
-&& test "X$$TERM" != Xdumb \
-&& { test "X$(AM_COLOR_TESTS)" = Xalways || test -t 1 2>/dev/null; } \
-&& { \
-  red=''; \
-  grn=''; \
-  lgn=''; \
-  blu=''; \
-  std=''; \
-}
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = ${SHELL} /home/machbuild/proj/rpm5/cvs-work/popt-devel/build-aux/missing --run aclocal-1.11
-AMTAR = ${SHELL} /home/machbuild/proj/rpm5/cvs-work/popt-devel/build-aux/missing --run tar
-API_SANITY_AUTOTEST = /usr/local/bin/api-sanity-autotest.pl
-AR = ar
-AUTOCONF = ${SHELL} /home/machbuild/proj/rpm5/cvs-work/popt-devel/build-aux/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/machbuild/proj/rpm5/cvs-work/popt-devel/build-aux/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/machbuild/proj/rpm5/cvs-work/popt-devel/build-aux/missing --run automake-1.11
-AWK = gawk
-CC = gcc -std=gnu99
-CCDEPMODE = depmode=gcc3
-CFLAGS = -g -O2
-CPP = gcc -E
-CPPFLAGS = 
-CYGPATH_W = echo
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-DOXYGEN = /usr/bin/doxygen
-DSYMUTIL = 
-DUMPBIN = 
-ECHO_C = 
-ECHO_N = -n
-ECHO_T = 
-EGREP = /bin/grep -E
-EXEEXT = 
-FGREP = /bin/grep -F
-GETTEXT_MACRO_VERSION = 0.17
-GMSGFMT = /usr/bin/msgfmt
-GMSGFMT_015 = /usr/bin/msgfmt
-GREP = /bin/grep
-HAVE_VALGRIND = 
-INSTALL = /usr/bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
-INTLLIBS = 
-INTL_MACOSX_LIBS = 
-LCOV = /usr/bin/lcov
-LD = /usr/bin/ld -m elf_x86_64
-LDFLAGS = 
-LD_VERSION_SCRIPT_FLAG = --version-script
-LIBICONV = 
-LIBINTL = 
-LIBOBJS = 
-LIBS = 
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LIPO = 
-LN_S = ln -s
-LTLIBICONV = 
-LTLIBINTL = 
-LTLIBOBJS = 
-LT_AGE = 8
-LT_CURRENT = 0
-LT_REVISION = 0
-MAINT = #
-MAKEINFO = ${SHELL} /home/machbuild/proj/rpm5/cvs-work/popt-devel/build-aux/missing --run makeinfo
-MCCABE = NO_MCCABE
-MKDIR_P = /bin/mkdir -p
-MSGFMT = /usr/bin/msgfmt
-MSGFMT_015 = /usr/bin/msgfmt
-MSGMERGE = /usr/bin/msgmerge
-MUDFLAP_OPTIONS = 
-NM = /usr/bin/nm -B
-NMEDIT = 
-OBJDUMP = objdump
-OBJEXT = o
-OTOOL = 
-OTOOL64 = 
-PACKAGE = popt
-PACKAGE_BUGREPORT = popt-devel@rpm5.org
-PACKAGE_NAME = popt
-PACKAGE_STRING = popt 1.17.DEVEL
-PACKAGE_TARNAME = popt
-PACKAGE_VERSION = 1.17.DEVEL
-PATH_SEPARATOR = :
-POPT_CFLAGS =  -fpie -fno-delete-null-pointer-checks -D_FORTIFY_SOURCE=2 -fstack-protector -fexceptions -D_REENTRANT
-POPT_LDFLAGS =  -pie
-POPT_PKGCONFIG_LIBS = -L${libdir} -lpopt
-POSUB = po
-RANLIB = ranlib
-SED = /bin/sed
-SET_MAKE = 
-SHELL = /bin/sh
-SPLINT = /usr/bin/splint
-STRIP = strip
-USE_NLS = yes
-VALGRIND_ENVIRONMENT = 
-VERSION = 1.17.DEVEL
-XGETTEXT = /usr/bin/xgettext
-XGETTEXT_015 = /usr/bin/xgettext
-XGETTEXT_EXTRA_OPTIONS = 
-abs_builddir = /home/machbuild/proj/rpm5/cvs-work/popt-devel
-abs_srcdir = /home/machbuild/proj/rpm5/cvs-work/popt-devel
-abs_top_builddir = /home/machbuild/proj/rpm5/cvs-work/popt-devel
-abs_top_srcdir = /home/machbuild/proj/rpm5/cvs-work/popt-devel
-ac_ct_CC = gcc
-ac_ct_DUMPBIN = 
-am__include = include
-am__leading_dot = .
-am__quote = 
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
-bindir = ${exec_prefix}/bin
-build = x86_64-unknown-linux-gnu
-build_alias = 
-build_cpu = x86_64
-build_os = linux-gnu
-build_vendor = unknown
-builddir = .
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = x86_64-unknown-linux-gnu
-host_alias = 
-host_cpu = x86_64
-host_os = linux-gnu
-host_vendor = unknown
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = ${SHELL} /home/machbuild/proj/rpm5/cvs-work/popt-devel/build-aux/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-mandir = ${datarootdir}/man
-mkdir_p = /bin/mkdir -p
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-srcdir = .
-sysconfdir = ${prefix}/etc
-target_alias = 
-top_build_prefix = 
-top_builddir = .
-top_srcdir = .
-ACLOCAL_AMFLAGS = -I m4
-AM_CPPFLAGS = -I. -I$(top_srcdir)
-AM_CFLAGS = $(POPT_CFLAGS)
-AM_LDFLAGS = $(POPT_LDFLAGS)
-BUILT_SOURCES = configmake.h popt.pc
-CLEANFILES = configmake.h configmake.h-t
-EXTRA_DIST = lookup3.c autogen.sh CHANGES  \
-	footer_no_timestamp.html libpopt.vers README-prereq\
-	$(TESTS) test-poptrc\
-	popt.xcodeproj/project.pbxproj \
-	popt.ps Doxyfile 	test3-data/01.answer \
-				test3-data/01.input \
-				test3-data/02.answer \
-				test3-data/02.input \
-				test3-data/03.answer \
-				test3-data/03.input
-
-SUBDIRS = po . auto
-noinst_HEADERS = poptint.h system.h
-check_SCRIPTS = $(TESTS)
-test1_CPPFLAGS = -I $(top_builddir) 
-test2_CPPFLAGS = -I $(top_builddir) 
-tdict_CPPFLAGS = -I $(top_builddir) 
-test3_CPPFLAGS = -I $(top_builddir) 
-test1_CFLAGS = $(AM_CFLAGS) 
-test2_CFLAGS = $(AM_CFLAGS) 
-tdict_CFLAGS = $(AM_CFLAGS) 
-test3_CFLAGS = $(AM_CFLAGS) 
-test1_LDFLAGS = $(AM_LDFLAGS) 
-test2_LDFLAGS = $(AM_LDFLAGS) 
-tdict_LDFLAGS = $(AM_LDFLAGS) 
-test3_LDFLAGS = $(AM_LDFLAGS) 
-test1_LDADD = $(top_builddir)/$(usrlib_LTLIBRARIES)
-test2_LDADD = $(top_builddir)/$(usrlib_LTLIBRARIES)
-tdict_LDADD = $(top_builddir)/$(usrlib_LTLIBRARIES)
-test3_LDADD = $(top_builddir)/$(usrlib_LTLIBRARIES)
-TESTS_ENVIRONMENT = top_srcdir=$(top_srcdir) MUDFLAP_OPTIONS="$(MUDFLAP_OPTIONS)" testpoptrc="$(top_srcdir)/test-poptrc" PATH=.:../src:$$PATH \
-                        $(VALGRIND_ENVIRONMENT) \
-			$(SHELL)
-
-TESTS = testit.sh
-include_HEADERS = popt.h
-usrlibdir = $(libdir)
-usrlib_LTLIBRARIES = libpopt.la
-libpopt_la_SOURCES = popt.c poptparse.c poptconfig.c popthelp.c poptint.c
-libpopt_la_LDFLAGS = -no-undefined   \
-	$(AM_LDFLAGS) $(am__append_1)
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = popt.pc
-poptaliasdir = $(sysconfdir)/popt.d
-poptalias_DATA = 
-dist_man_MANS = popt.3
-po_dir = ./po
-all: $(BUILT_SOURCES) config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-am--refresh:
-	@:
-$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: # $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: # $(am__configure_deps) 
-	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-popt.pc: $(top_builddir)/config.status $(srcdir)/popt.pc.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-popt.spec: $(top_builddir)/config.status $(srcdir)/popt.spec.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-install-usrlibLTLIBRARIES: $(usrlib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	test -z "$(usrlibdir)" || $(MKDIR_P) "$(DESTDIR)$(usrlibdir)"
-	@list='$(usrlib_LTLIBRARIES)'; test -n "$(usrlibdir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(usrlibdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(usrlibdir)"; \
-	}
-
-uninstall-usrlibLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(usrlib_LTLIBRARIES)'; test -n "$(usrlibdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(usrlibdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(usrlibdir)/$$f"; \
-	done
-
-clean-usrlibLTLIBRARIES:
-	-test -z "$(usrlib_LTLIBRARIES)" || rm -f $(usrlib_LTLIBRARIES)
-	@list='$(usrlib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-libpopt.la: $(libpopt_la_OBJECTS) $(libpopt_la_DEPENDENCIES) 
-	$(libpopt_la_LINK) -rpath $(usrlibdir) $(libpopt_la_OBJECTS) $(libpopt_la_LIBADD) $(LIBS)
-
-clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
-	echo " rm -f" $$list; \
-	rm -f $$list || exit $$?; \
-	test -n "$(EXEEXT)" || exit 0; \
-	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-	echo " rm -f" $$list; \
-	rm -f $$list
-tdict$(EXEEXT): $(tdict_OBJECTS) $(tdict_DEPENDENCIES) 
-	@rm -f tdict$(EXEEXT)
-	$(tdict_LINK) $(tdict_OBJECTS) $(tdict_LDADD) $(LIBS)
-test1$(EXEEXT): $(test1_OBJECTS) $(test1_DEPENDENCIES) 
-	@rm -f test1$(EXEEXT)
-	$(test1_LINK) $(test1_OBJECTS) $(test1_LDADD) $(LIBS)
-test2$(EXEEXT): $(test2_OBJECTS) $(test2_DEPENDENCIES) 
-	@rm -f test2$(EXEEXT)
-	$(test2_LINK) $(test2_OBJECTS) $(test2_LDADD) $(LIBS)
-test3$(EXEEXT): $(test3_OBJECTS) $(test3_DEPENDENCIES) 
-	@rm -f test3$(EXEEXT)
-	$(test3_LINK) $(test3_OBJECTS) $(test3_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-include ./$(DEPDIR)/popt.Plo
-include ./$(DEPDIR)/poptconfig.Plo
-include ./$(DEPDIR)/popthelp.Plo
-include ./$(DEPDIR)/poptint.Plo
-include ./$(DEPDIR)/poptparse.Plo
-include ./$(DEPDIR)/tdict-tdict.Po
-include ./$(DEPDIR)/test1-test1.Po
-include ./$(DEPDIR)/test2-test2.Po
-include ./$(DEPDIR)/test3-test3.Po
-
-.c.o:
-	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-#	source='$<' object='$@' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(COMPILE) -c $<
-
-.c.obj:
-	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-#	source='$<' object='$@' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-#	source='$<' object='$@' libtool=yes \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(LTCOMPILE) -c -o $@ $<
-
-tdict-tdict.o: tdict.c
-	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(tdict_CPPFLAGS) $(CPPFLAGS) $(tdict_CFLAGS) $(CFLAGS) -MT tdict-tdict.o -MD -MP -MF $(DEPDIR)/tdict-tdict.Tpo -c -o tdict-tdict.o `test -f 'tdict.c' || echo '$(srcdir)/'`tdict.c
-	$(am__mv) $(DEPDIR)/tdict-tdict.Tpo $(DEPDIR)/tdict-tdict.Po
-#	source='tdict.c' object='tdict-tdict.o' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(tdict_CPPFLAGS) $(CPPFLAGS) $(tdict_CFLAGS) $(CFLAGS) -c -o tdict-tdict.o `test -f 'tdict.c' || echo '$(srcdir)/'`tdict.c
-
-tdict-tdict.obj: tdict.c
-	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(tdict_CPPFLAGS) $(CPPFLAGS) $(tdict_CFLAGS) $(CFLAGS) -MT tdict-tdict.obj -MD -MP -MF $(DEPDIR)/tdict-tdict.Tpo -c -o tdict-tdict.obj `if test -f 'tdict.c'; then $(CYGPATH_W) 'tdict.c'; else $(CYGPATH_W) '$(srcdir)/tdict.c'; fi`
-	$(am__mv) $(DEPDIR)/tdict-tdict.Tpo $(DEPDIR)/tdict-tdict.Po
-#	source='tdict.c' object='tdict-tdict.obj' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(tdict_CPPFLAGS) $(CPPFLAGS) $(tdict_CFLAGS) $(CFLAGS) -c -o tdict-tdict.obj `if test -f 'tdict.c'; then $(CYGPATH_W) 'tdict.c'; else $(CYGPATH_W) '$(srcdir)/tdict.c'; fi`
-
-test1-test1.o: test1.c
-	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test1_CPPFLAGS) $(CPPFLAGS) $(test1_CFLAGS) $(CFLAGS) -MT test1-test1.o -MD -MP -MF $(DEPDIR)/test1-test1.Tpo -c -o test1-test1.o `test -f 'test1.c' || echo '$(srcdir)/'`test1.c
-	$(am__mv) $(DEPDIR)/test1-test1.Tpo $(DEPDIR)/test1-test1.Po
-#	source='test1.c' object='test1-test1.o' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test1_CPPFLAGS) $(CPPFLAGS) $(test1_CFLAGS) $(CFLAGS) -c -o test1-test1.o `test -f 'test1.c' || echo '$(srcdir)/'`test1.c
-
-test1-test1.obj: test1.c
-	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test1_CPPFLAGS) $(CPPFLAGS) $(test1_CFLAGS) $(CFLAGS) -MT test1-test1.obj -MD -MP -MF $(DEPDIR)/test1-test1.Tpo -c -o test1-test1.obj `if test -f 'test1.c'; then $(CYGPATH_W) 'test1.c'; else $(CYGPATH_W) '$(srcdir)/test1.c'; fi`
-	$(am__mv) $(DEPDIR)/test1-test1.Tpo $(DEPDIR)/test1-test1.Po
-#	source='test1.c' object='test1-test1.obj' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test1_CPPFLAGS) $(CPPFLAGS) $(test1_CFLAGS) $(CFLAGS) -c -o test1-test1.obj `if test -f 'test1.c'; then $(CYGPATH_W) 'test1.c'; else $(CYGPATH_W) '$(srcdir)/test1.c'; fi`
-
-test2-test2.o: test2.c
-	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test2_CPPFLAGS) $(CPPFLAGS) $(test2_CFLAGS) $(CFLAGS) -MT test2-test2.o -MD -MP -MF $(DEPDIR)/test2-test2.Tpo -c -o test2-test2.o `test -f 'test2.c' || echo '$(srcdir)/'`test2.c
-	$(am__mv) $(DEPDIR)/test2-test2.Tpo $(DEPDIR)/test2-test2.Po
-#	source='test2.c' object='test2-test2.o' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test2_CPPFLAGS) $(CPPFLAGS) $(test2_CFLAGS) $(CFLAGS) -c -o test2-test2.o `test -f 'test2.c' || echo '$(srcdir)/'`test2.c
-
-test2-test2.obj: test2.c
-	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test2_CPPFLAGS) $(CPPFLAGS) $(test2_CFLAGS) $(CFLAGS) -MT test2-test2.obj -MD -MP -MF $(DEPDIR)/test2-test2.Tpo -c -o test2-test2.obj `if test -f 'test2.c'; then $(CYGPATH_W) 'test2.c'; else $(CYGPATH_W) '$(srcdir)/test2.c'; fi`
-	$(am__mv) $(DEPDIR)/test2-test2.Tpo $(DEPDIR)/test2-test2.Po
-#	source='test2.c' object='test2-test2.obj' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test2_CPPFLAGS) $(CPPFLAGS) $(test2_CFLAGS) $(CFLAGS) -c -o test2-test2.obj `if test -f 'test2.c'; then $(CYGPATH_W) 'test2.c'; else $(CYGPATH_W) '$(srcdir)/test2.c'; fi`
-
-test3-test3.o: test3.c
-	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test3_CPPFLAGS) $(CPPFLAGS) $(test3_CFLAGS) $(CFLAGS) -MT test3-test3.o -MD -MP -MF $(DEPDIR)/test3-test3.Tpo -c -o test3-test3.o `test -f 'test3.c' || echo '$(srcdir)/'`test3.c
-	$(am__mv) $(DEPDIR)/test3-test3.Tpo $(DEPDIR)/test3-test3.Po
-#	source='test3.c' object='test3-test3.o' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test3_CPPFLAGS) $(CPPFLAGS) $(test3_CFLAGS) $(CFLAGS) -c -o test3-test3.o `test -f 'test3.c' || echo '$(srcdir)/'`test3.c
-
-test3-test3.obj: test3.c
-	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test3_CPPFLAGS) $(CPPFLAGS) $(test3_CFLAGS) $(CFLAGS) -MT test3-test3.obj -MD -MP -MF $(DEPDIR)/test3-test3.Tpo -c -o test3-test3.obj `if test -f 'test3.c'; then $(CYGPATH_W) 'test3.c'; else $(CYGPATH_W) '$(srcdir)/test3.c'; fi`
-	$(am__mv) $(DEPDIR)/test3-test3.Tpo $(DEPDIR)/test3-test3.Po
-#	source='test3.c' object='test3-test3.obj' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test3_CPPFLAGS) $(CPPFLAGS) $(test3_CFLAGS) $(CFLAGS) -c -o test3-test3.obj `if test -f 'test3.c'; then $(CYGPATH_W) 'test3.c'; else $(CYGPATH_W) '$(srcdir)/test3.c'; fi`
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool config.lt
-install-man3: $(dist_man_MANS)
-	@$(NORMAL_INSTALL)
-	test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
-	@list=''; test -n "$(man3dir)" || exit 0; \
-	{ for i in $$list; do echo "$$i"; done; \
-	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.3[a-z]*$$/p'; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
-	  fi; \
-	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man3:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man3dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.3[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	test -z "$$files" || { \
-	  echo " ( cd '$(DESTDIR)$(man3dir)' && rm -f" $$files ")"; \
-	  cd "$(DESTDIR)$(man3dir)" && rm -f $$files; }
-install-pkgconfigDATA: $(pkgconfig_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
-	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
-	done
-
-uninstall-pkgconfigDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$files" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
-install-poptaliasDATA: $(poptalias_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(poptaliasdir)" || $(MKDIR_P) "$(DESTDIR)$(poptaliasdir)"
-	@list='$(poptalias_DATA)'; test -n "$(poptaliasdir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(poptaliasdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(poptaliasdir)" || exit $$?; \
-	done
-
-uninstall-poptaliasDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(poptalias_DATA)'; test -n "$(poptaliasdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$files" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(poptaliasdir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(poptaliasdir)" && rm -f $$files
-install-includeHEADERS: $(include_HEADERS)
-	@$(NORMAL_INSTALL)
-	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
-	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
-	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
-	done
-
-uninstall-includeHEADERS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$files" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(includedir)" && rm -f $$files
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-check-TESTS: $(TESTS)
-	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
-	srcdir=$(srcdir); export srcdir; \
-	list=' $(TESTS) '; \
-	$(am__tty_colors); \
-	if test -n "$$list"; then \
-	  for tst in $$list; do \
-	    if test -f ./$$tst; then dir=./; \
-	    elif test -f $$tst; then dir=; \
-	    else dir="$(srcdir)/"; fi; \
-	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
-	      all=`expr $$all + 1`; \
-	      case " $(XFAIL_TESTS) " in \
-	      *[\ \	]$$tst[\ \	]*) \
-		xpass=`expr $$xpass + 1`; \
-		failed=`expr $$failed + 1`; \
-		col=$$red; res=XPASS; \
-	      ;; \
-	      *) \
-		col=$$grn; res=PASS; \
-	      ;; \
-	      esac; \
-	    elif test $$? -ne 77; then \
-	      all=`expr $$all + 1`; \
-	      case " $(XFAIL_TESTS) " in \
-	      *[\ \	]$$tst[\ \	]*) \
-		xfail=`expr $$xfail + 1`; \
-		col=$$lgn; res=XFAIL; \
-	      ;; \
-	      *) \
-		failed=`expr $$failed + 1`; \
-		col=$$red; res=FAIL; \
-	      ;; \
-	      esac; \
-	    else \
-	      skip=`expr $$skip + 1`; \
-	      col=$$blu; res=SKIP; \
-	    fi; \
-	    echo "$${col}$$res$${std}: $$tst"; \
-	  done; \
-	  if test "$$all" -eq 1; then \
-	    tests="test"; \
-	    All=""; \
-	  else \
-	    tests="tests"; \
-	    All="All "; \
-	  fi; \
-	  if test "$$failed" -eq 0; then \
-	    if test "$$xfail" -eq 0; then \
-	      banner="$$All$$all $$tests passed"; \
-	    else \
-	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
-	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
-	    fi; \
-	  else \
-	    if test "$$xpass" -eq 0; then \
-	      banner="$$failed of $$all $$tests failed"; \
-	    else \
-	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
-	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
-	    fi; \
-	  fi; \
-	  dashes="$$banner"; \
-	  skipped=""; \
-	  if test "$$skip" -ne 0; then \
-	    if test "$$skip" -eq 1; then \
-	      skipped="($$skip test was not run)"; \
-	    else \
-	      skipped="($$skip tests were not run)"; \
-	    fi; \
-	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
-	      dashes="$$skipped"; \
-	  fi; \
-	  report=""; \
-	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
-	    report="Please report to $(PACKAGE_BUGREPORT)"; \
-	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
-	      dashes="$$report"; \
-	  fi; \
-	  dashes=`echo "$$dashes" | sed s/./=/g`; \
-	  if test "$$failed" -eq 0; then \
-	    echo "$$grn$$dashes"; \
-	  else \
-	    echo "$$red$$dashes"; \
-	  fi; \
-	  echo "$$banner"; \
-	  test -z "$$skipped" || echo "$$skipped"; \
-	  test -z "$$report" || echo "$$report"; \
-	  echo "$$dashes$$std"; \
-	  test "$$failed" -eq 0; \
-	else :; fi
-
-distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@$(am__cd) '$(distuninstallcheck_dir)' \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) check-recursive
-all-am: Makefile $(LTLIBRARIES) $(MANS) $(DATA) $(HEADERS) config.h
-installdirs: installdirs-recursive
-installdirs-am:
-	for dir in "$(DESTDIR)$(usrlibdir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(poptaliasdir)" "$(DESTDIR)$(includedir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: $(BUILT_SOURCES)
-	$(MAKE) $(AM_MAKEFLAGS) install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-clean: clean-recursive
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libtool clean-local \
-	clean-usrlibLTLIBRARIES mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-local distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-includeHEADERS install-man \
-	install-pkgconfigDATA install-poptaliasDATA \
-	install-usrlibLTLIBRARIES
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man: install-man3
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-includeHEADERS uninstall-man \
-	uninstall-pkgconfigDATA uninstall-poptaliasDATA \
-	uninstall-usrlibLTLIBRARIES
-
-uninstall-man: uninstall-man3
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
-	check-am ctags-recursive install install-am install-strip \
-	tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am am--refresh check check-TESTS check-am clean \
-	clean-checkPROGRAMS clean-generic clean-libtool clean-local \
-	clean-usrlibLTLIBRARIES ctags ctags-recursive dist dist-all \
-	dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-xz \
-	dist-zip distcheck distclean distclean-compile \
-	distclean-generic distclean-hdr distclean-libtool \
-	distclean-local distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-includeHEADERS install-info \
-	install-info-am install-man install-man3 install-pdf \
-	install-pdf-am install-pkgconfigDATA install-poptaliasDATA \
-	install-ps install-ps-am install-strip \
-	install-usrlibLTLIBRARIES installcheck installcheck-am \
-	installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags tags-recursive uninstall uninstall-am \
-	uninstall-includeHEADERS uninstall-man uninstall-man3 \
-	uninstall-pkgconfigDATA uninstall-poptaliasDATA \
-	uninstall-usrlibLTLIBRARIES
-
-
-# Retrieve values of the variables through 'configure' followed by
-# 'make', not directly through 'configure', so that a user who
-# sets some of these variables consistently on the 'make' command
-# line gets correct results.
-#
-# One advantage of this approach, compared to the classical
-# approach of adding -DLIBDIR=\"$(libdir)\" etc. to AM_CPPFLAGS,
-# is that it protects against the use of undefined variables.
-# If, say, $(libdir) is not set in the Makefile, LIBDIR is not
-# defined by this module, and code using LIBDIR gives a
-# compilation error.
-#
-# Another advantage is that 'make' output is shorter.
-#
-# Listed in the same order as the GNU makefile conventions.
-# The Automake-defined pkg* macros are appended, in the order
-# listed in the Automake 1.10a+ documentation.
-configmake.h: Makefile
-	$(AM_V_GEN)rm -f $@-t && \
-	{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
-	  echo '#define PREFIX "$(prefix)"'; \
-	  echo '#define EXEC_PREFIX "$(exec_prefix)"'; \
-	  echo '#define BINDIR "$(bindir)"'; \
-	  echo '#define SBINDIR "$(sbindir)"'; \
-	  echo '#define LIBEXECDIR "$(libexecdir)"'; \
-	  echo '#define DATAROOTDIR "$(datarootdir)"'; \
-	  echo '#define DATADIR "$(datadir)"'; \
-	  echo '#define SYSCONFDIR "$(sysconfdir)"'; \
-	  echo '#define SHAREDSTATEDIR "$(sharedstatedir)"'; \
-	  echo '#define LOCALSTATEDIR "$(localstatedir)"'; \
-	  echo '#define INCLUDEDIR "$(includedir)"'; \
-	  echo '#define OLDINCLUDEDIR "$(oldincludedir)"'; \
-	  echo '#define DOCDIR "$(docdir)"'; \
-	  echo '#define INFODIR "$(infodir)"'; \
-	  echo '#define HTMLDIR "$(htmldir)"'; \
-	  echo '#define DVIDIR "$(dvidir)"'; \
-	  echo '#define PDFDIR "$(pdfdir)"'; \
-	  echo '#define PSDIR "$(psdir)"'; \
-	  echo '#define LIBDIR "$(libdir)"'; \
-	  echo '#define LISPDIR "$(lispdir)"'; \
-	  echo '#define LOCALEDIR "$(localedir)"'; \
-	  echo '#define MANDIR "$(mandir)"'; \
-	  echo '#define MANEXT "$(manext)"'; \
-	  echo '#define PKGDATADIR "$(pkgdatadir)"'; \
-	  echo '#define PKGINCLUDEDIR "$(pkgincludedir)"'; \
-	  echo '#define PKGLIBDIR "$(pkglibdir)"'; \
-	  echo '#define PKGLIBEXECDIR "$(pkglibexecdir)"'; \
-	  echo '#define POPT_ALIAS "$(sysconfdir)/popt"'; \
-	} | sed '/""/d' > $@-t && \
-	if test -f $@ && cmp $@-t $@ > /dev/null; then \
-	  rm -f $@-t; \
-	  touch $@; \
-	else \
-	  rm -f $@; mv $@-t $@; \
-	fi
-
-distclean-local:
-	rm -rf .ccache 
-
-clean-local:
-	rm -rf doxygen *.gcda *.gcno lcov-result popt-valgrind-result 
-
-lint:
-	$(SPLINT) ${DEFS} ${INCLUDES} test1.c ${libpopt_la_SOURCES}
-
-popt.lcd: Makefile.am ${libpopt_la_SOURCES} ${include_HEADERS} ${noinst_HEADERS}
-	$(SPLINT) -dump $@ ${libpopt_la_SOURCES}
-
-#mccabe:
-#	$(MCCABE) $(libpopt_la_SOURCES) | sort -n -r | head -n 10
-
-doxygen: Doxyfile
-	rm -rf doxygen
-	mkdir -p doxygen
-	$(DOXYGEN)
-
-# run lcov from scratch, always
-lcov-reset:
-	make lcov-run
-	make lcov-report
-
-# run lcov from scratch if the dir is not there
-lcov:
-	make lcov-reset
-
-# reset run coverage tests
-lcov-run:
-	@-rm -rf lcov
-	find . -name "*.gcda" -exec rm {} \;
-	make check
-
-# generate report based on current coverage data
-lcov-report:
-	rm -rf lcov-result
-	mkdir lcov-result
-	$(LCOV) --directory . --capture --output-file lcov-result/lcov.info
-	$(LCOV) -l lcov-result/lcov.info | grep -v "`cd $(top_srcdir) && pwd`" | cut -d: -f1 > lcov-result/remove
-	$(LCOV) -r lcov-result/lcov.info `cat lcov-result/remove` > lcov-result/lcov.cleaned.info
-	rm lcov-result/remove
-	mv lcov-result/lcov.cleaned.info lcov-result/lcov.info
-	genhtml -t "$(PACKAGE_STRING)" -o lcov lcov-result/lcov.info
-.PHONY:	updatepo
-updatepo:
-	rsync -Lrtvz  translationproject.org::tp/latest/popt/  po
-	ls "$(po_dir)"/*.po 2>/dev/null | LANG=C sed 's|.*/||; s|\.po$$||' > "$(po_dir)/LINGUAS"
-
-.PHONY:	sources
-sources:
-	@echo $(libpopt_la_SOURCES:%=popt/%)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: