diff options
Diffstat (limited to 'port/install.sh')
| -rw-r--r-- | port/install.sh | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/port/install.sh b/port/install.sh new file mode 100644 index 00000000..fc423669 --- /dev/null +++ b/port/install.sh @@ -0,0 +1,246 @@ +#! /bin/sh +# $Header: /d1/sam/tiff/port/RCS/install.sh.in,v 1.20 1997/08/29 21:48:53 sam Exp $ +# +# Warning, this file was automatically created by the TIFF configure script +# +# HylaFAX Facsimile Software +# +# Copyright (c) 1990-1997 Sam Leffler +# Copyright (c) 1991-1997 Silicon Graphics, Inc. +# HylaFAX is a trademark of Silicon Graphics +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. +# + +# +# Warning, this file was automatically created by the HylaFAX configure script +# +# VERSION: v3.4beta037 +# DATE: Wed Feb 3 19:53:27 EST 1999 +# TARGET: i586-unknown-linux +# + +# +# Shell script to emulate Silicon Graphics install program. +# We emulate the non-standard interface used by install so +# that we can build SGI inst packages on SGI systems. Note +# that we cannot emulate everything because we don't maintain +# a history of installed software; thus we cannot tell when +# configuration files have been modified and save old copies. +# +# NB: we don't do chown/chmod/chgrp by default; it must be +# explicitly set on the command line. +# + +# +# install [options] files ... +# +# Options are: +# +# -o save existing target foo as OLDfoo +# -O remove existing target foo, if it fails save as OLDfoo +# -m mode set mode of installed target +# -u uid set uid of installed target +# -g gid set gid of installed target +# -root path set ROOT directory for target pathnames +# -dir create directories +# -fifo create FIFO special files +# -ln path create hard link +# -lns path create symbolic link +# -src path source pathname different from target +# -f dir install files in the target directory ROOT/dir +# -F dir like -f, but create directories that do not exist +# -v echo actions +# -idb stuff specify package and, optionally, do special work +# +preopts= +postopts= +SaveFirst=no +HasSource=yes +RemoveFirst=no +NoUpdate=no +Suggested=no +Updated=no + +CMD=cp +SRC= +FILES= +DESTDIR= +CHMOD=":" +CHOWN=":" +CHGRP=":" +RM="rm -f" +MV="mv -f" +ECHO=echo +VERBOSE=":" +STRIP="/usr/bin/strip" +CMP=cmp + +TARGETS= +while [ x"$1" != x ] +do + arg=$1 + case $arg in + -m) shift; CHMOD="/bin/chmod $1";; + -u) shift; CHOWN="@CHOWN@ $1";; + -g) shift; CHGRP="@CHGRP@ $1";; + -o) SaveFirst=yes;; + -O) RemoveFirst=yes; SaveFirst=yes;; + -root) shift; ROOT=$1;; + -dir) CMD=mkdir; HasSource=no; + RM=":"; STRIP=":" + ;; + -fifo) CMD=@MKFIFO@; HasSource=no; + x=`echo $CMD | /bin/sed 's;.*/;;'`; + test $x = mknod && postopts="p"; + STRIP=":" + ;; + -ln) shift; CMD=/bin/ln; SRC="$1" + STRIP=":" + ;; + -lns) shift; CMD=/bin/ln; preopts="-s"; SRC="$1" + STRIP=":" + ;; + -src) shift; SRC="$1";; + -[fF]) shift; DESTDIR="$1";; + -idb) shift; opt="$1" + case "$opt" in + *config\(update\)*) Updated=yes;; + *config\(suggest\)*) Suggested=yes;; + *config\(noupdate\)*) NoUpdate=yes;; + *nostrip*) STRIP=":";; + esac + ;; + # these are skipped/not handled + -new|-rawidb|-blk|-chr) shift;; + -v) VERBOSE=$ECHO;; + -*) ;; + *) TARGETS="$TARGETS $arg";; + esac + shift +done + +# +# Install the specified target. +# +install() +{ + src=$1 target=$2 + if [ $RemoveFirst = yes -a -f $target ]; then + $VERBOSE "$RM $target" + $RM $target + fi + if [ $SaveFirst = yes -a -f $target ]; then + bf=`echo $src | /bin/sed 's;.*/;;'` + $VERBOSE "$MV $target $ROOT/$DESTDIR/OLD$bf" + $MV $target $ROOT/$DESTDIR/OLD$bf + fi + if [ -z "$SRC" -a $HasSource = yes ]; then + $VERBOSE "$CMD $preopts $src $target $postopts" + $CMD $preopts $f $target $postopts + else + $VERBOSE "$CMD $preopts $SRC $target $postopts" + $CMD $preopts $SRC $target $postopts + fi + if [ $? -eq 0 ]; then + $VERBOSE "$CHOWN $target" + $CHOWN $target + $VERBOSE "$CHGRP $target" + $CHGRP $target + $VERBOSE "$CHMOD $target" + $CHMOD $target + if [ $STRIP != ":" -a -x $ROOT/$DESTDIR/$f ]; then + $STRIP $target >/dev/null 2>&1 || true + $VERBOSE "$STRIP $target" + fi + fi +} + +if [ $Suggested = yes ]; then + # + # A suggested file. If an existing target does + # not exist, then install it. Otherwise, install + # it as target.N if it's different from the current + # installed target. + # + # NB: cannot be used with a special file 'cuz we + # use test -f to see if the file exists. + # + for f in $TARGETS; do + t=$ROOT/$DESTDIR/$f + if [ -f $t ]; then + if [ -z "$SRC" -a $HasSource = yes ]; then + $CMP -s $f $t || { + $ECHO "*** Warning, target has local changes, installing $f as $t.N" + install $f $t.N; + } + else + $CMP -s $SRC $t || { + $ECHO "*** Warning, target has local changes, installing $f as $t.N" + install $f $t.N + } + fi + else + install $f $t + fi + done +elif [ $Updated = yes ]; then + # + # A file to be updated. If an existing target does + # not exist, then install it. Otherwise, install + # it as target and save the old version as target.O + # if the old version is different from the current + # installed target. + # + # NB: cannot be used with a special file 'cuz we + # use test -f to see if the file exists. + # + for f in $TARGETS; do + t=$ROOT/$DESTDIR/$f + if [ -f $t ]; then + if [ -z "$SRC" -a $HasSource = yes ]; then + $CMP -s $f $t || $MV $t $t.O + else + $CMP -s $SRC $t || $MV $t $t.O + fi + fi + install $f $t + done +elif [ $NoUpdate = yes ]; then + # + # A file that is never to be updated; the target + # is created only if it does not exist. + # + # NB: cannot be used with a special file 'cuz we + # use test -f to see if the file exists. + # + for f in $TARGETS; do + t=$ROOT/$DESTDIR/$f + test -f $t || install $f $t + done +else + # + # Normal case, a target that should be installed + # with the existing copy, optionally, saved first. + # + for f in $TARGETS; do + install $f $ROOT/$DESTDIR/$f + done +fi |