Tarball conversion

7 files changed, 1959 insertions, 0 deletions

diff --git a/include/Makefile.am b/include/Makefile.am
new file mode 100644
index 0000000..0f34fab
--- /dev/null
+++ b/include/Makefile.am
@@ -0,0 +1,3 @@
+## Process this file with automake to produce Makefile.in
+
+SUBDIRS = vorbis
diff --git a/include/Makefile.in b/include/Makefile.in
new file mode 100644
index 0000000..f85b536
--- /dev/null
+++ b/include/Makefile.in
@@ -0,0 +1,583 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = include
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \
+	$(top_srcdir)/m4/ogg.m4 $(top_srcdir)/m4/pkg.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEBUG = @DEBUG@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+HAVE_DOXYGEN = @HAVE_DOXYGEN@
+HTLATEX = @HTLATEX@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PDFLATEX = @PDFLATEX@
+PKG_CONFIG = @PKG_CONFIG@
+PROFILE = @PROFILE@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+VE_LIB_AGE = @VE_LIB_AGE@
+VE_LIB_CURRENT = @VE_LIB_CURRENT@
+VE_LIB_REVISION = @VE_LIB_REVISION@
+VF_LIB_AGE = @VF_LIB_AGE@
+VF_LIB_CURRENT = @VF_LIB_CURRENT@
+VF_LIB_REVISION = @VF_LIB_REVISION@
+VORBIS_LIBS = @VORBIS_LIBS@
+V_LIB_AGE = @V_LIB_AGE@
+V_LIB_CURRENT = @V_LIB_CURRENT@
+V_LIB_REVISION = @V_LIB_REVISION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pthread_lib = @pthread_lib@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = vorbis
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu include/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am check check-am clean clean-generic clean-libtool \
+	ctags ctags-recursive distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/include/vorbis/Makefile.am b/include/vorbis/Makefile.am
new file mode 100644
index 0000000..dbba34e
--- /dev/null
+++ b/include/vorbis/Makefile.am
@@ -0,0 +1,7 @@
+## Process this file with automake to produce Makefile.in
+
+vorbisincludedir = $(includedir)/vorbis
+
+vorbisinclude_HEADERS = codec.h vorbisfile.h vorbisenc.h
+
+
diff --git a/include/vorbis/Makefile.in b/include/vorbis/Makefile.in
new file mode 100644
index 0000000..ac320a9
--- /dev/null
+++ b/include/vorbis/Makefile.in
@@ -0,0 +1,481 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = include/vorbis
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(vorbisinclude_HEADERS)
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/add_cflags.m4 \
+	$(top_srcdir)/m4/ogg.m4 $(top_srcdir)/m4/pkg.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(vorbisincludedir)"
+HEADERS = $(vorbisinclude_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEBUG = @DEBUG@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+HAVE_DOXYGEN = @HAVE_DOXYGEN@
+HTLATEX = @HTLATEX@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OGG_CFLAGS = @OGG_CFLAGS@
+OGG_LIBS = @OGG_LIBS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PDFLATEX = @PDFLATEX@
+PKG_CONFIG = @PKG_CONFIG@
+PROFILE = @PROFILE@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+VE_LIB_AGE = @VE_LIB_AGE@
+VE_LIB_CURRENT = @VE_LIB_CURRENT@
+VE_LIB_REVISION = @VE_LIB_REVISION@
+VF_LIB_AGE = @VF_LIB_AGE@
+VF_LIB_CURRENT = @VF_LIB_CURRENT@
+VF_LIB_REVISION = @VF_LIB_REVISION@
+VORBIS_LIBS = @VORBIS_LIBS@
+V_LIB_AGE = @V_LIB_AGE@
+V_LIB_CURRENT = @V_LIB_CURRENT@
+V_LIB_REVISION = @V_LIB_REVISION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pthread_lib = @pthread_lib@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+vorbisincludedir = $(includedir)/vorbis
+vorbisinclude_HEADERS = codec.h vorbisfile.h vorbisenc.h
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/vorbis/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu include/vorbis/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-vorbisincludeHEADERS: $(vorbisinclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(vorbisincludedir)" || $(MKDIR_P) "$(DESTDIR)$(vorbisincludedir)"
+	@list='$(vorbisinclude_HEADERS)'; test -n "$(vorbisincludedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(vorbisincludedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(vorbisincludedir)" || exit $$?; \
+	done
+
+uninstall-vorbisincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(vorbisinclude_HEADERS)'; test -n "$(vorbisincludedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(vorbisincludedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(vorbisincludedir)" && rm -f $$files
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS)
+installdirs:
+	for dir in "$(DESTDIR)$(vorbisincludedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-vorbisincludeHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-vorbisincludeHEADERS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libtool ctags distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip \
+	install-vorbisincludeHEADERS installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags uninstall uninstall-am \
+	uninstall-vorbisincludeHEADERS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/include/vorbis/codec.h b/include/vorbis/codec.h
new file mode 100644
index 0000000..999aa33
--- /dev/null
+++ b/include/vorbis/codec.h
@@ -0,0 +1,243 @@
+/********************************************************************
+ *                                                                  *
+ * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE.   *
+ * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS     *
+ * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
+ * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING.       *
+ *                                                                  *
+ * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2001             *
+ * by the Xiph.Org Foundation http://www.xiph.org/                  *
+
+ ********************************************************************
+
+ function: libvorbis codec headers
+ last mod: $Id: codec.h 17021 2010-03-24 09:29:41Z xiphmont $
+
+ ********************************************************************/
+
+#ifndef _vorbis_codec_h_
+#define _vorbis_codec_h_
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif /* __cplusplus */
+
+#include <ogg/ogg.h>
+
+typedef struct vorbis_info{
+  int version;
+  int channels;
+  long rate;
+
+  /* The below bitrate declarations are *hints*.
+     Combinations of the three values carry the following implications:
+
+     all three set to the same value:
+       implies a fixed rate bitstream
+     only nominal set:
+       implies a VBR stream that averages the nominal bitrate.  No hard
+       upper/lower limit
+     upper and or lower set:
+       implies a VBR bitstream that obeys the bitrate limits. nominal
+       may also be set to give a nominal rate.
+     none set:
+       the coder does not care to speculate.
+  */
+
+  long bitrate_upper;
+  long bitrate_nominal;
+  long bitrate_lower;
+  long bitrate_window;
+
+  void *codec_setup;
+} vorbis_info;
+
+/* vorbis_dsp_state buffers the current vorbis audio
+   analysis/synthesis state.  The DSP state belongs to a specific
+   logical bitstream ****************************************************/
+typedef struct vorbis_dsp_state{
+  int analysisp;
+  vorbis_info *vi;
+
+  float **pcm;
+  float **pcmret;
+  int      pcm_storage;
+  int      pcm_current;
+  int      pcm_returned;
+
+  int  preextrapolate;
+  int  eofflag;
+
+  long lW;
+  long W;
+  long nW;
+  long centerW;
+
+  ogg_int64_t granulepos;
+  ogg_int64_t sequence;
+
+  ogg_int64_t glue_bits;
+  ogg_int64_t time_bits;
+  ogg_int64_t floor_bits;
+  ogg_int64_t res_bits;
+
+  void       *backend_state;
+} vorbis_dsp_state;
+
+typedef struct vorbis_block{
+  /* necessary stream state for linking to the framing abstraction */
+  float  **pcm;       /* this is a pointer into local storage */
+  oggpack_buffer opb;
+
+  long  lW;
+  long  W;
+  long  nW;
+  int   pcmend;
+  int   mode;
+
+  int         eofflag;
+  ogg_int64_t granulepos;
+  ogg_int64_t sequence;
+  vorbis_dsp_state *vd; /* For read-only access of configuration */
+
+  /* local storage to avoid remallocing; it's up to the mapping to
+     structure it */
+  void               *localstore;
+  long                localtop;
+  long                localalloc;
+  long                totaluse;
+  struct alloc_chain *reap;
+
+  /* bitmetrics for the frame */
+  long glue_bits;
+  long time_bits;
+  long floor_bits;
+  long res_bits;
+
+  void *internal;
+
+} vorbis_block;
+
+/* vorbis_block is a single block of data to be processed as part of
+the analysis/synthesis stream; it belongs to a specific logical
+bitstream, but is independent from other vorbis_blocks belonging to
+that logical bitstream. *************************************************/
+
+struct alloc_chain{
+  void *ptr;
+  struct alloc_chain *next;
+};
+
+/* vorbis_info contains all the setup information specific to the
+   specific compression/decompression mode in progress (eg,
+   psychoacoustic settings, channel setup, options, codebook
+   etc). vorbis_info and substructures are in backends.h.
+*********************************************************************/
+
+/* the comments are not part of vorbis_info so that vorbis_info can be
+   static storage */
+typedef struct vorbis_comment{
+  /* unlimited user comment fields.  libvorbis writes 'libvorbis'
+     whatever vendor is set to in encode */
+  char **user_comments;
+  int   *comment_lengths;
+  int    comments;
+  char  *vendor;
+
+} vorbis_comment;
+
+
+/* libvorbis encodes in two abstraction layers; first we perform DSP
+   and produce a packet (see docs/analysis.txt).  The packet is then
+   coded into a framed OggSquish bitstream by the second layer (see
+   docs/framing.txt).  Decode is the reverse process; we sync/frame
+   the bitstream and extract individual packets, then decode the
+   packet back into PCM audio.
+
+   The extra framing/packetizing is used in streaming formats, such as
+   files.  Over the net (such as with UDP), the framing and
+   packetization aren't necessary as they're provided by the transport
+   and the streaming layer is not used */
+
+/* Vorbis PRIMITIVES: general ***************************************/
+
+extern void     vorbis_info_init(vorbis_info *vi);
+extern void     vorbis_info_clear(vorbis_info *vi);
+extern int      vorbis_info_blocksize(vorbis_info *vi,int zo);
+extern void     vorbis_comment_init(vorbis_comment *vc);
+extern void     vorbis_comment_add(vorbis_comment *vc, const char *comment);
+extern void     vorbis_comment_add_tag(vorbis_comment *vc,
+                                       const char *tag, const char *contents);
+extern char    *vorbis_comment_query(vorbis_comment *vc, const char *tag, int count);
+extern int      vorbis_comment_query_count(vorbis_comment *vc, const char *tag);
+extern void     vorbis_comment_clear(vorbis_comment *vc);
+
+extern int      vorbis_block_init(vorbis_dsp_state *v, vorbis_block *vb);
+extern int      vorbis_block_clear(vorbis_block *vb);
+extern void     vorbis_dsp_clear(vorbis_dsp_state *v);
+extern double   vorbis_granule_time(vorbis_dsp_state *v,
+                                    ogg_int64_t granulepos);
+
+extern const char *vorbis_version_string(void);
+
+/* Vorbis PRIMITIVES: analysis/DSP layer ****************************/
+
+extern int      vorbis_analysis_init(vorbis_dsp_state *v,vorbis_info *vi);
+extern int      vorbis_commentheader_out(vorbis_comment *vc, ogg_packet *op);
+extern int      vorbis_analysis_headerout(vorbis_dsp_state *v,
+                                          vorbis_comment *vc,
+                                          ogg_packet *op,
+                                          ogg_packet *op_comm,
+                                          ogg_packet *op_code);
+extern float  **vorbis_analysis_buffer(vorbis_dsp_state *v,int vals);
+extern int      vorbis_analysis_wrote(vorbis_dsp_state *v,int vals);
+extern int      vorbis_analysis_blockout(vorbis_dsp_state *v,vorbis_block *vb);
+extern int      vorbis_analysis(vorbis_block *vb,ogg_packet *op);
+
+extern int      vorbis_bitrate_addblock(vorbis_block *vb);
+extern int      vorbis_bitrate_flushpacket(vorbis_dsp_state *vd,
+                                           ogg_packet *op);
+
+/* Vorbis PRIMITIVES: synthesis layer *******************************/
+extern int      vorbis_synthesis_idheader(ogg_packet *op);
+extern int      vorbis_synthesis_headerin(vorbis_info *vi,vorbis_comment *vc,
+                                          ogg_packet *op);
+
+extern int      vorbis_synthesis_init(vorbis_dsp_state *v,vorbis_info *vi);
+extern int      vorbis_synthesis_restart(vorbis_dsp_state *v);
+extern int      vorbis_synthesis(vorbis_block *vb,ogg_packet *op);
+extern int      vorbis_synthesis_trackonly(vorbis_block *vb,ogg_packet *op);
+extern int      vorbis_synthesis_blockin(vorbis_dsp_state *v,vorbis_block *vb);
+extern int      vorbis_synthesis_pcmout(vorbis_dsp_state *v,float ***pcm);
+extern int      vorbis_synthesis_lapout(vorbis_dsp_state *v,float ***pcm);
+extern int      vorbis_synthesis_read(vorbis_dsp_state *v,int samples);
+extern long     vorbis_packet_blocksize(vorbis_info *vi,ogg_packet *op);
+
+extern int      vorbis_synthesis_halfrate(vorbis_info *v,int flag);
+extern int      vorbis_synthesis_halfrate_p(vorbis_info *v);
+
+/* Vorbis ERRORS and return codes ***********************************/
+
+#define OV_FALSE      -1
+#define OV_EOF        -2
+#define OV_HOLE       -3
+
+#define OV_EREAD      -128
+#define OV_EFAULT     -129
+#define OV_EIMPL      -130
+#define OV_EINVAL     -131
+#define OV_ENOTVORBIS -132
+#define OV_EBADHEADER -133
+#define OV_EVERSION   -134
+#define OV_ENOTAUDIO  -135
+#define OV_EBADPACKET -136
+#define OV_EBADLINK   -137
+#define OV_ENOSEEK    -138
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif
+
diff --git a/include/vorbis/vorbisenc.h b/include/vorbis/vorbisenc.h
new file mode 100644
index 0000000..02332b5
--- /dev/null
+++ b/include/vorbis/vorbisenc.h
@@ -0,0 +1,436 @@
+/********************************************************************
+ *                                                                  *
+ * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE.   *
+ * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS     *
+ * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
+ * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING.       *
+ *                                                                  *
+ * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2001             *
+ * by the Xiph.Org Foundation http://www.xiph.org/                  *
+ *                                                                  *
+ ********************************************************************
+
+ function: vorbis encode-engine setup
+ last mod: $Id: vorbisenc.h 17021 2010-03-24 09:29:41Z xiphmont $
+
+ ********************************************************************/
+
+/** \file
+ * Libvorbisenc is a convenient API for setting up an encoding
+ * environment using libvorbis. Libvorbisenc encapsulates the
+ * actions needed to set up the encoder properly.
+ */
+
+#ifndef _OV_ENC_H_
+#define _OV_ENC_H_
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif /* __cplusplus */
+
+#include "codec.h"
+
+/**
+ * This is the primary function within libvorbisenc for setting up managed
+ * bitrate modes.
+ *
+ * Before this function is called, the \ref vorbis_info
+ * struct should be initialized by using vorbis_info_init() from the libvorbis
+ * API.  After encoding, vorbis_info_clear() should be called.
+ *
+ * The max_bitrate, nominal_bitrate, and min_bitrate settings are used to set
+ * constraints for the encoded file.  This function uses these settings to
+ * select the appropriate encoding mode and set it up.
+ *
+ * \param vi               Pointer to an initialized \ref vorbis_info struct.
+ * \param channels         The number of channels to be encoded.
+ * \param rate             The sampling rate of the source audio.
+ * \param max_bitrate      Desired maximum bitrate (limit). -1 indicates unset.
+ * \param nominal_bitrate  Desired average, or central, bitrate. -1 indicates unset.
+ * \param min_bitrate      Desired minimum bitrate. -1 indicates unset.
+ *
+ * \return Zero for success, and negative values for failure.
+ *
+ * \retval 0          Success.
+ * \retval OV_EFAULT  Internal logic fault; indicates a bug or heap/stack corruption.
+ * \retval OV_EINVAL  Invalid setup request, eg, out of range argument.
+ * \retval OV_EIMPL   Unimplemented mode; unable to comply with bitrate request.
+ */
+extern int vorbis_encode_init(vorbis_info *vi,
+                              long channels,
+                              long rate,
+
+                              long max_bitrate,
+                              long nominal_bitrate,
+                              long min_bitrate);
+
+/**
+ * This function performs step-one of a three-step bitrate-managed encode
+ * setup.  It functions similarly to the one-step setup performed by \ref
+ * vorbis_encode_init but allows an application to make further encode setup
+ * tweaks using \ref vorbis_encode_ctl before finally calling \ref
+ * vorbis_encode_setup_init to complete the setup process.
+ *
+ * Before this function is called, the \ref vorbis_info struct should be
+ * initialized by using vorbis_info_init() from the libvorbis API.  After
+ * encoding, vorbis_info_clear() should be called.
+ *
+ * The max_bitrate, nominal_bitrate, and min_bitrate settings are used to set
+ * constraints for the encoded file.  This function uses these settings to
+ * select the appropriate encoding mode and set it up.
+ *
+ * \param vi                Pointer to an initialized vorbis_info struct.
+ * \param channels          The number of channels to be encoded.
+ * \param rate              The sampling rate of the source audio.
+ * \param max_bitrate       Desired maximum bitrate (limit). -1 indicates unset.
+ * \param nominal_bitrate   Desired average, or central, bitrate. -1 indicates unset.
+ * \param min_bitrate       Desired minimum bitrate. -1 indicates unset.
+ *
+ * \return Zero for success, and negative for failure.
+ *
+ * \retval 0           Success
+ * \retval OV_EFAULT   Internal logic fault; indicates a bug or heap/stack corruption.
+ * \retval OV_EINVAL   Invalid setup request, eg, out of range argument.
+ * \retval OV_EIMPL    Unimplemented mode; unable to comply with bitrate request.
+ */
+extern int vorbis_encode_setup_managed(vorbis_info *vi,
+                                       long channels,
+                                       long rate,
+
+                                       long max_bitrate,
+                                       long nominal_bitrate,
+                                       long min_bitrate);
+
+/**
+ * This function performs step-one of a three-step variable bitrate
+ * (quality-based) encode setup.  It functions similarly to the one-step setup
+ * performed by \ref vorbis_encode_init_vbr() but allows an application to
+ * make further encode setup tweaks using \ref vorbis_encode_ctl() before
+ * finally calling \ref vorbis_encode_setup_init to complete the setup
+ * process.
+ *
+ * Before this function is called, the \ref vorbis_info struct should be
+ * initialized by using \ref vorbis_info_init() from the libvorbis API.  After
+ * encoding, vorbis_info_clear() should be called.
+ *
+ * \param vi        Pointer to an initialized vorbis_info struct.
+ * \param channels  The number of channels to be encoded.
+ * \param rate      The sampling rate of the source audio.
+ * \param quality   Desired quality level, currently from -0.1 to 1.0 (lo to hi).
+ *
+ * \return Zero for success, and negative values for failure.
+ *
+ * \retval  0          Success
+ * \retval  OV_EFAULT  Internal logic fault; indicates a bug or heap/stack corruption.
+ * \retval  OV_EINVAL  Invalid setup request, eg, out of range argument.
+ * \retval  OV_EIMPL   Unimplemented mode; unable to comply with quality level request.
+ */
+extern int vorbis_encode_setup_vbr(vorbis_info *vi,
+                                  long channels,
+                                  long rate,
+
+                                  float quality
+                                  );
+
+/**
+ * This is the primary function within libvorbisenc for setting up variable
+ * bitrate ("quality" based) modes.
+ *
+ *
+ * Before this function is called, the vorbis_info struct should be
+ * initialized by using vorbis_info_init() from the libvorbis API. After
+ * encoding, vorbis_info_clear() should be called.
+ *
+ * \param vi           Pointer to an initialized vorbis_info struct.
+ * \param channels     The number of channels to be encoded.
+ * \param rate         The sampling rate of the source audio.
+ * \param base_quality Desired quality level, currently from -0.1 to 1.0 (lo to hi).
+ *
+ *
+ * \return Zero for success, or a negative number for failure.
+ *
+ * \retval 0           Success
+ * \retval OV_EFAULT   Internal logic fault; indicates a bug or heap/stack corruption.
+ * \retval OV_EINVAL   Invalid setup request, eg, out of range argument.
+ * \retval OV_EIMPL    Unimplemented mode; unable to comply with quality level request.
+ */
+extern int vorbis_encode_init_vbr(vorbis_info *vi,
+                                  long channels,
+                                  long rate,
+
+                                  float base_quality
+                                  );
+
+/**
+ * This function performs the last stage of three-step encoding setup, as
+ * described in the API overview under managed bitrate modes.
+ *
+ * Before this function is called, the \ref vorbis_info struct should be
+ * initialized by using vorbis_info_init() from the libvorbis API, one of
+ * \ref vorbis_encode_setup_managed() or \ref vorbis_encode_setup_vbr() called to
+ * initialize the high-level encoding setup, and \ref vorbis_encode_ctl()
+ * called if necessary to make encoding setup changes.
+ * vorbis_encode_setup_init() finalizes the highlevel encoding structure into
+ * a complete encoding setup after which the application may make no further
+ * setup changes.
+ *
+ * After encoding, vorbis_info_clear() should be called.
+ *
+ * \param vi Pointer to an initialized \ref vorbis_info struct.
+ *
+ * \return Zero for success, and negative values for failure.
+ *
+ * \retval  0           Success.
+ * \retval  OV_EFAULT  Internal logic fault; indicates a bug or heap/stack corruption.
+ *
+ * \retval OV_EINVAL   Attempt to use vorbis_encode_setup_init() without first
+ * calling one of vorbis_encode_setup_managed() or vorbis_encode_setup_vbr() to
+ * initialize the high-level encoding setup
+ *
+ */
+extern int vorbis_encode_setup_init(vorbis_info *vi);
+
+/**
+ * This function implements a generic interface to miscellaneous encoder
+ * settings similar to the classic UNIX 'ioctl()' system call.  Applications
+ * may use vorbis_encode_ctl() to query or set bitrate management or quality
+ * mode details by using one of several \e request arguments detailed below.
+ * vorbis_encode_ctl() must be called after one of
+ * vorbis_encode_setup_managed() or vorbis_encode_setup_vbr().  When used
+ * to modify settings, \ref vorbis_encode_ctl() must be called before \ref
+ * vorbis_encode_setup_init().
+ *
+ * \param vi      Pointer to an initialized vorbis_info struct.
+ *
+ * \param number Specifies the desired action; See \ref encctlcodes "the list
+ * of available requests".
+ *
+ * \param arg void * pointing to a data structure matching the request
+ * argument.
+ *
+ * \retval 0          Success. Any further return information (such as the result of a
+ * query) is placed into the storage pointed to by *arg.
+ *
+ * \retval OV_EINVAL  Invalid argument, or an attempt to modify a setting after
+ * calling vorbis_encode_setup_init().
+ *
+ * \retval OV_EIMPL   Unimplemented or unknown request
+ */
+extern int vorbis_encode_ctl(vorbis_info *vi,int number,void *arg);
+
+/**
+ * \deprecated This is a deprecated interface. Please use vorbis_encode_ctl()
+ * with the \ref ovectl_ratemanage2_arg struct and \ref
+ * OV_ECTL_RATEMANAGE2_GET and \ref OV_ECTL_RATEMANAGE2_SET calls in new code.
+ *
+ * The \ref ovectl_ratemanage_arg structure is used with vorbis_encode_ctl()
+ * and the \ref OV_ECTL_RATEMANAGE_GET, \ref OV_ECTL_RATEMANAGE_SET, \ref
+ * OV_ECTL_RATEMANAGE_AVG, \ref OV_ECTL_RATEMANAGE_HARD calls in order to
+ * query and modify specifics of the encoder's bitrate management
+ * configuration.
+*/
+struct ovectl_ratemanage_arg {
+  int    management_active; /**< nonzero if bitrate management is active*/
+/** hard lower limit (in kilobits per second) below which the stream bitrate
+    will never be allowed for any given bitrate_hard_window seconds of time.*/
+  long   bitrate_hard_min;
+/** hard upper limit (in kilobits per second) above which the stream bitrate
+    will never be allowed for any given bitrate_hard_window seconds of time.*/
+  long   bitrate_hard_max;
+/** the window period (in seconds) used to regulate the hard bitrate minimum
+    and maximum*/
+  double bitrate_hard_window;
+/** soft lower limit (in kilobits per second) below which the average bitrate
+    tracker will start nudging the bitrate higher.*/
+  long   bitrate_av_lo;
+/** soft upper limit (in kilobits per second) above which the average bitrate
+    tracker will start nudging the bitrate lower.*/
+  long   bitrate_av_hi;
+/** the window period (in seconds) used to regulate the average bitrate
+    minimum and maximum.*/
+  double bitrate_av_window;
+/** Regulates the relative centering of the average and hard windows; in
+    libvorbis 1.0 and 1.0.1, the hard window regulation overlapped but
+    followed the average window regulation. In libvorbis 1.1 a bit-reservoir
+    interface replaces the old windowing interface; the older windowing
+    interface is simulated and this field has no effect.*/
+  double bitrate_av_window_center;
+};
+
+/**
+ * \name struct ovectl_ratemanage2_arg
+ *
+ * The ovectl_ratemanage2_arg structure is used with vorbis_encode_ctl() and
+ * the OV_ECTL_RATEMANAGE2_GET and OV_ECTL_RATEMANAGE2_SET calls in order to
+ * query and modify specifics of the encoder's bitrate management
+ * configuration.
+ *
+*/
+struct ovectl_ratemanage2_arg {
+  int    management_active; /**< nonzero if bitrate management is active */
+/** Lower allowed bitrate limit in kilobits per second */
+  long   bitrate_limit_min_kbps;
+/** Upper allowed bitrate limit in kilobits per second */
+  long   bitrate_limit_max_kbps;
+  long   bitrate_limit_reservoir_bits; /**<Size of the bitrate reservoir in bits */
+/** Regulates the bitrate reservoir's preferred fill level in a range from 0.0
+ * to 1.0; 0.0 tries to bank bits to buffer against future bitrate spikes, 1.0
+ * buffers against future sudden drops in instantaneous bitrate. Default is
+ * 0.1
+ */
+  double bitrate_limit_reservoir_bias;
+/** Average bitrate setting in kilobits per second */
+  long   bitrate_average_kbps;
+/** Slew rate limit setting for average bitrate adjustment; sets the minimum
+ *  time in seconds the bitrate tracker may swing from one extreme to the
+ *  other when boosting or damping average bitrate.
+ */
+  double bitrate_average_damping;
+};
+
+
+/**
+ * \name vorbis_encode_ctl() codes
+ *
+ * \anchor encctlcodes
+ *
+ * These values are passed as the \c number parameter of vorbis_encode_ctl().
+ * The type of the referent of that function's \c arg pointer depends on these
+ * codes.
+ */
+/*@{*/
+
+/**
+ * Query the current encoder bitrate management setting.
+ *
+ *Argument: <tt>struct ovectl_ratemanage2_arg *</tt>
+ *
+ * Used to query the current encoder bitrate management setting. Also used to
+ * initialize fields of an ovectl_ratemanage2_arg structure for use with
+ * \ref OV_ECTL_RATEMANAGE2_SET.
+ */
+#define OV_ECTL_RATEMANAGE2_GET      0x14
+
+/**
+ * Set the current encoder bitrate management settings.
+ *
+ * Argument: <tt>struct ovectl_ratemanage2_arg *</tt>
+ *
+ * Used to set the current encoder bitrate management settings to the values
+ * listed in the ovectl_ratemanage2_arg. Passing a NULL pointer will disable
+ * bitrate management.
+*/
+#define OV_ECTL_RATEMANAGE2_SET      0x15
+
+/**
+ * Returns the current encoder hard-lowpass setting (kHz) in the double
+ * pointed to by arg.
+ *
+ * Argument: <tt>double *</tt>
+*/
+#define OV_ECTL_LOWPASS_GET          0x20
+
+/**
+ *  Sets the encoder hard-lowpass to the value (kHz) pointed to by arg. Valid
+ *  lowpass settings range from 2 to 99.
+ *
+ * Argument: <tt>double *</tt>
+*/
+#define OV_ECTL_LOWPASS_SET          0x21
+
+/**
+ *  Returns the current encoder impulse block setting in the double pointed
+ *  to by arg.
+ *
+ * Argument: <tt>double *</tt>
+*/
+#define OV_ECTL_IBLOCK_GET           0x30
+
+/**
+ *  Sets the impulse block bias to the the value pointed to by arg.
+ *
+ * Argument: <tt>double *</tt>
+ *
+ *  Valid range is -15.0 to 0.0 [default]. A negative impulse block bias will
+ *  direct to encoder to use more bits when incoding short blocks that contain
+ *  strong impulses, thus improving the accuracy of impulse encoding.
+ */
+#define OV_ECTL_IBLOCK_SET           0x31
+
+/**
+ *  Returns the current encoder coupling setting in the int pointed
+ *  to by arg.
+ *
+ * Argument: <tt>int *</tt>
+*/
+#define OV_ECTL_COUPLING_GET         0x40
+
+/**
+ *  Enables/disables channel coupling in multichannel encoding according to arg.
+ *
+ * Argument: <tt>int *</tt>
+ *
+ *  Zero disables channel coupling for multichannel inputs, nonzer enables
+ *  channel coupling.  Setting has no effect on monophonic encoding or
+ *  multichannel counts that do not offer coupling.  At present, coupling is
+ *  available for stereo and 5.1 encoding.
+ */
+#define OV_ECTL_COUPLING_SET         0x41
+
+  /* deprecated rate management supported only for compatibility */
+
+/**
+ * Old interface to querying bitrate management settings.
+ *
+ * Deprecated after move to bit-reservoir style management in 1.1 rendered
+ * this interface partially obsolete.
+
+ * \deprecated Please use \ref OV_ECTL_RATEMANAGE2_GET instead.
+ *
+ * Argument: <tt>struct ovectl_ratemanage_arg *</tt>
+ */
+#define OV_ECTL_RATEMANAGE_GET       0x10
+/**
+ * Old interface to modifying bitrate management settings.
+ *
+ *  deprecated after move to bit-reservoir style management in 1.1 rendered
+ *  this interface partially obsolete.
+ *
+ * \deprecated Please use \ref OV_ECTL_RATEMANAGE2_SET instead.
+ *
+ * Argument: <tt>struct ovectl_ratemanage_arg *</tt>
+ */
+#define OV_ECTL_RATEMANAGE_SET       0x11
+/**
+ * Old interface to setting average-bitrate encoding mode.
+ *
+ * Deprecated after move to bit-reservoir style management in 1.1 rendered
+ * this interface partially obsolete.
+ *
+ *  \deprecated Please use \ref OV_ECTL_RATEMANAGE2_SET instead.
+ *
+ * Argument: <tt>struct ovectl_ratemanage_arg *</tt>
+ */
+#define OV_ECTL_RATEMANAGE_AVG       0x12
+/**
+ * Old interface to setting bounded-bitrate encoding modes.
+ *
+ * deprecated after move to bit-reservoir style management in 1.1 rendered
+ * this interface partially obsolete.
+ *
+ *  \deprecated Please use \ref OV_ECTL_RATEMANAGE2_SET instead.
+ *
+ * Argument: <tt>struct ovectl_ratemanage_arg *</tt>
+ */
+#define OV_ECTL_RATEMANAGE_HARD      0x13
+
+/*@}*/
+
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif
diff --git a/include/vorbis/vorbisfile.h b/include/vorbis/vorbisfile.h
new file mode 100644
index 0000000..9271331
--- /dev/null
+++ b/include/vorbis/vorbisfile.h
@@ -0,0 +1,206 @@
+/********************************************************************
+ *                                                                  *
+ * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE.   *
+ * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS     *
+ * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
+ * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING.       *
+ *                                                                  *
+ * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2007             *
+ * by the Xiph.Org Foundation http://www.xiph.org/                  *
+ *                                                                  *
+ ********************************************************************
+
+ function: stdio-based convenience library for opening/seeking/decoding
+ last mod: $Id: vorbisfile.h 17182 2010-04-29 03:48:32Z xiphmont $
+
+ ********************************************************************/
+
+#ifndef _OV_FILE_H_
+#define _OV_FILE_H_
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif /* __cplusplus */
+
+#include <stdio.h>
+#include "codec.h"
+
+/* The function prototypes for the callbacks are basically the same as for
+ * the stdio functions fread, fseek, fclose, ftell.
+ * The one difference is that the FILE * arguments have been replaced with
+ * a void * - this is to be used as a pointer to whatever internal data these
+ * functions might need. In the stdio case, it's just a FILE * cast to a void *
+ *
+ * If you use other functions, check the docs for these functions and return
+ * the right values. For seek_func(), you *MUST* return -1 if the stream is
+ * unseekable
+ */
+typedef struct {
+  size_t (*read_func)  (void *ptr, size_t size, size_t nmemb, void *datasource);
+  int    (*seek_func)  (void *datasource, ogg_int64_t offset, int whence);
+  int    (*close_func) (void *datasource);
+  long   (*tell_func)  (void *datasource);
+} ov_callbacks;
+
+#ifndef OV_EXCLUDE_STATIC_CALLBACKS
+
+/* a few sets of convenient callbacks, especially for use under
+ * Windows where ov_open_callbacks() should always be used instead of
+ * ov_open() to avoid problems with incompatible crt.o version linking
+ * issues. */
+
+static int _ov_header_fseek_wrap(FILE *f,ogg_int64_t off,int whence){
+  if(f==NULL)return(-1);
+
+#ifdef __MINGW32__
+  return fseeko64(f,off,whence);
+#elif defined (_WIN32)
+  return _fseeki64(f,off,whence);
+#else
+  return fseek(f,off,whence);
+#endif
+}
+
+/* These structs below (OV_CALLBACKS_DEFAULT etc) are defined here as
+ * static data. That means that every file which includes this header
+ * will get its own copy of these structs whether it uses them or
+ * not unless it #defines OV_EXCLUDE_STATIC_CALLBACKS.
+ * These static symbols are essential on platforms such as Windows on
+ * which several different versions of stdio support may be linked to
+ * by different DLLs, and we need to be certain we know which one
+ * we're using (the same one as the main application).
+ */
+
+static ov_callbacks OV_CALLBACKS_DEFAULT = {
+  (size_t (*)(void *, size_t, size_t, void *))  fread,
+  (int (*)(void *, ogg_int64_t, int))           _ov_header_fseek_wrap,
+  (int (*)(void *))                             fclose,
+  (long (*)(void *))                            ftell
+};
+
+static ov_callbacks OV_CALLBACKS_NOCLOSE = {
+  (size_t (*)(void *, size_t, size_t, void *))  fread,
+  (int (*)(void *, ogg_int64_t, int))           _ov_header_fseek_wrap,
+  (int (*)(void *))                             NULL,
+  (long (*)(void *))                            ftell
+};
+
+static ov_callbacks OV_CALLBACKS_STREAMONLY = {
+  (size_t (*)(void *, size_t, size_t, void *))  fread,
+  (int (*)(void *, ogg_int64_t, int))           NULL,
+  (int (*)(void *))                             fclose,
+  (long (*)(void *))                            NULL
+};
+
+static ov_callbacks OV_CALLBACKS_STREAMONLY_NOCLOSE = {
+  (size_t (*)(void *, size_t, size_t, void *))  fread,
+  (int (*)(void *, ogg_int64_t, int))           NULL,
+  (int (*)(void *))                             NULL,
+  (long (*)(void *))                            NULL
+};
+
+#endif
+
+#define  NOTOPEN   0
+#define  PARTOPEN  1
+#define  OPENED    2
+#define  STREAMSET 3
+#define  INITSET   4
+
+typedef struct OggVorbis_File {
+  void            *datasource; /* Pointer to a FILE *, etc. */
+  int              seekable;
+  ogg_int64_t      offset;
+  ogg_int64_t      end;
+  ogg_sync_state   oy;
+
+  /* If the FILE handle isn't seekable (eg, a pipe), only the current
+     stream appears */
+  int              links;
+  ogg_int64_t     *offsets;
+  ogg_int64_t     *dataoffsets;
+  long            *serialnos;
+  ogg_int64_t     *pcmlengths; /* overloaded to maintain binary
+                                  compatibility; x2 size, stores both
+                                  beginning and end values */
+  vorbis_info     *vi;
+  vorbis_comment  *vc;
+
+  /* Decoding working state local storage */
+  ogg_int64_t      pcm_offset;
+  int              ready_state;
+  long             current_serialno;
+  int              current_link;
+
+  double           bittrack;
+  double           samptrack;
+
+  ogg_stream_state os; /* take physical pages, weld into a logical
+                          stream of packets */
+  vorbis_dsp_state vd; /* central working state for the packet->PCM decoder */
+  vorbis_block     vb; /* local working space for packet->PCM decode */
+
+  ov_callbacks callbacks;
+
+} OggVorbis_File;
+
+
+extern int ov_clear(OggVorbis_File *vf);
+extern int ov_fopen(const char *path,OggVorbis_File *vf);
+extern int ov_open(FILE *f,OggVorbis_File *vf,const char *initial,long ibytes);
+extern int ov_open_callbacks(void *datasource, OggVorbis_File *vf,
+                const char *initial, long ibytes, ov_callbacks callbacks);
+
+extern int ov_test(FILE *f,OggVorbis_File *vf,const char *initial,long ibytes);
+extern int ov_test_callbacks(void *datasource, OggVorbis_File *vf,
+                const char *initial, long ibytes, ov_callbacks callbacks);
+extern int ov_test_open(OggVorbis_File *vf);
+
+extern long ov_bitrate(OggVorbis_File *vf,int i);
+extern long ov_bitrate_instant(OggVorbis_File *vf);
+extern long ov_streams(OggVorbis_File *vf);
+extern long ov_seekable(OggVorbis_File *vf);
+extern long ov_serialnumber(OggVorbis_File *vf,int i);
+
+extern ogg_int64_t ov_raw_total(OggVorbis_File *vf,int i);
+extern ogg_int64_t ov_pcm_total(OggVorbis_File *vf,int i);
+extern double ov_time_total(OggVorbis_File *vf,int i);
+
+extern int ov_raw_seek(OggVorbis_File *vf,ogg_int64_t pos);
+extern int ov_pcm_seek(OggVorbis_File *vf,ogg_int64_t pos);
+extern int ov_pcm_seek_page(OggVorbis_File *vf,ogg_int64_t pos);
+extern int ov_time_seek(OggVorbis_File *vf,double pos);
+extern int ov_time_seek_page(OggVorbis_File *vf,double pos);
+
+extern int ov_raw_seek_lap(OggVorbis_File *vf,ogg_int64_t pos);
+extern int ov_pcm_seek_lap(OggVorbis_File *vf,ogg_int64_t pos);
+extern int ov_pcm_seek_page_lap(OggVorbis_File *vf,ogg_int64_t pos);
+extern int ov_time_seek_lap(OggVorbis_File *vf,double pos);
+extern int ov_time_seek_page_lap(OggVorbis_File *vf,double pos);
+
+extern ogg_int64_t ov_raw_tell(OggVorbis_File *vf);
+extern ogg_int64_t ov_pcm_tell(OggVorbis_File *vf);
+extern double ov_time_tell(OggVorbis_File *vf);
+
+extern vorbis_info *ov_info(OggVorbis_File *vf,int link);
+extern vorbis_comment *ov_comment(OggVorbis_File *vf,int link);
+
+extern long ov_read_float(OggVorbis_File *vf,float ***pcm_channels,int samples,
+                          int *bitstream);
+extern long ov_read_filter(OggVorbis_File *vf,char *buffer,int length,
+                          int bigendianp,int word,int sgned,int *bitstream,
+                          void (*filter)(float **pcm,long channels,long samples,void *filter_param),void *filter_param);
+extern long ov_read(OggVorbis_File *vf,char *buffer,int length,
+                    int bigendianp,int word,int sgned,int *bitstream);
+extern int ov_crosslap(OggVorbis_File *vf1,OggVorbis_File *vf2);
+
+extern int ov_halfrate(OggVorbis_File *vf,int flag);
+extern int ov_halfrate_p(OggVorbis_File *vf);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif
+