diff options
| author | Stephen Rothwell <sfr@canb.auug.org.au> | 2019-05-14 08:28:59 +1000 |
|---|---|---|
| committer | Stephen Rothwell <sfr@canb.auug.org.au> | 2019-05-14 08:28:59 +1000 |
| commit | 29e0244d56385898d3a938b54bc46bb674631259 (patch) | |
| tree | c44688c598eec70ecc5026fe59b21e5f10fd0e2d | |
| parent | a3a21ebc5c55ed3a56bf20483965f7dfb28bc318 (diff) | |
| parent | c19ddad911592784e18c6d39a833647876fb74e5 (diff) | |
| download | linux-next-29e0244d56385898d3a938b54bc46bb674631259.tar.gz | |
Merge remote-tracking branch 'arm-soc/for-next'
753 files changed, 29821 insertions, 10957 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 7f40cb5f490b..061f7b98a07f 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -110,6 +110,7 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,u200" (Meson g12a s905d2) - "amediatech,x96-max" (Meson g12a s905x2) + - "seirobotics,sei510" (Meson g12a s905x2) Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 72d481c8dd48..5d7dbabbb784 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -22,9 +22,11 @@ Required properties: ------------------- - compatible: should be "fsl,imx-scu". - mbox-names: should include "tx0", "tx1", "tx2", "tx3", - "rx0", "rx1", "rx2", "rx3". -- mboxes: List of phandle of 4 MU channels for tx and 4 MU channels - for rx. All 8 MU channels must be in the same MU instance. + "rx0", "rx1", "rx2", "rx3"; + include "gip3" if want to support general MU interrupt. +- mboxes: List of phandle of 4 MU channels for tx, 4 MU channels for + rx, and 1 optional MU channel for general interrupt. + All MU channels must be in the same MU instance. Cross instances are not allowed. The MU instance can only be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need to make sure use the one which is not conflict with other @@ -34,6 +36,7 @@ Required properties: Channel 1 must be "tx1" or "rx1". Channel 2 must be "tx2" or "rx2". Channel 3 must be "tx3" or "rx3". + General interrupt rx channel must be "gip3". e.g. mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 @@ -42,10 +45,18 @@ Required properties: &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 - &lsio_mu1 1 3>; + &lsio_mu1 1 3 + &lsio_mu1 3 3>; See Documentation/devicetree/bindings/mailbox/fsl,mu.txt for detailed mailbox binding. +Note: Each mu which supports general interrupt should have an alias correctly +numbered in "aliases" node. +e.g. +aliases { + mu1 = &lsio_mu1; +}; + i.MX SCU Client Device Node: ============================================================ @@ -124,6 +135,10 @@ Required properties: Example (imx8qxp): ------------- +aliases { + mu1 = &lsio_mu1; +}; + lsio_mu1: mailbox@5d1c0000 { ... #mbox-cells = <2>; @@ -133,7 +148,8 @@ firmware { scu { compatible = "fsl,imx-scu"; mbox-names = "tx0", "tx1", "tx2", "tx3", - "rx0", "rx1", "rx2", "rx3"; + "rx0", "rx1", "rx2", "rx3", + "gip3"; mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 @@ -141,7 +157,8 @@ firmware { &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 - &lsio_mu1 1 3>; + &lsio_mu1 1 3 + &lsio_mu1 3 3>; clk: clk { compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 7e2cd6ad26bd..407138ebc0d0 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -51,6 +51,13 @@ properties: - const: i2se,duckbill-2 - const: fsl,imx28 + - description: i.MX50 based Boards + items: + - enum: + - fsl,imx50-evk + - kobo,aura + - const: fsl,imx50 + - description: i.MX51 Babbage Board items: - enum: @@ -67,6 +74,7 @@ properties: - fsl,imx53-evk - fsl,imx53-qsb - fsl,imx53-smd + - menlo,m53menlo - const: fsl,imx53 - description: i.MX6Q based Boards @@ -90,6 +98,7 @@ properties: - description: i.MX6DL based Boards items: - enum: + - eckelmann,imx6dl-ci4x10 - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board - technologic,imx6dl-ts4900 @@ -137,10 +146,18 @@ properties: - const: fsl,imx6ull # This seems odd. Should be last? - const: fsl,imx6ulz + - description: i.MX7S based Boards + items: + - enum: + - tq,imx7s-mba7 # i.MX7S TQ MBa7 with TQMa7S SoM + - const: fsl,imx7s + - description: i.MX7D based Boards items: - enum: - fsl,imx7d-sdb # i.MX7 SabreSD Board + - tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM + - zii,imx7d-rpu2 # ZII RPU2 Board - const: fsl,imx7d - description: @@ -154,6 +171,12 @@ properties: - const: compulab,cl-som-imx7 - const: fsl,imx7d + - description: i.MX8MM based Boards + items: + - enum: + - fsl,imx8mm-evk # i.MX8MM EVK Board + - const: fsl,imx8mm + - description: i.MX8QXP based Boards items: - enum: @@ -176,6 +199,19 @@ properties: - fsl,vf610 - fsl,vf610m4 + - description: ZII's VF610 based Boards + items: + - enum: + - zii,vf610cfu1 # ZII VF610 CFU1 Board + - zii,vf610dev-c # ZII VF610 Development Board, Rev C + - zii,vf610dev-b # ZII VF610 Development Board, Rev B + - zii,vf610scu4-aib # ZII VF610 SCU4 AIB + - zii,vf610dtu # ZII VF610 SSMB DTU Board + - zii,vf610spu3 # ZII VF610 SSMB SPU3 Board + - zii,vf610spb4 # ZII VF610 SPB4 Board + - const: zii,vf610dev + - const: fsl,vf610 + - description: LS1012A based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml new file mode 100644 index 000000000000..f4f7451e5e8a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/intel-ixp4xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel IXP4xx Device Tree Bindings + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + oneOf: + - items: + - enum: + - linksys,nslu2 + - const: intel,ixp42x + - items: + - enum: + - gateworks,gw2358 + - const: intel,ixp43x diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 2ecc712bf707..1c1e48fd94b5 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -92,6 +92,9 @@ SoCs: - DRA718 compatible = "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7" +- AM5748 + compatible = "ti,am5748", "ti,dra762", "ti,dra7" + - AM5728 compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" @@ -184,6 +187,9 @@ Boards: - AM57XX SBC-AM57x compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" +- AM5748 IDK + compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7"; + - AM5728 IDK compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 061a03edf9c8..5c6bbf10abc9 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -97,6 +97,7 @@ properties: - enum: - friendlyarm,nanopc-t4 - friendlyarm,nanopi-m4 + - friendlyarm,nanopi-neo4 - const: rockchip,rk3399 - description: GeekBuying GeekBox @@ -146,7 +147,7 @@ properties: - const: google,gru - const: rockchip,rk3399 - - description: Google Jaq (Haier Chromebook 11 and more) + - description: Google Jaq (Haier Chromebook 11 and more w/ uSD) items: - const: google,veyron-jaq-rev5 - const: google,veyron-jaq-rev4 @@ -159,6 +160,12 @@ properties: - description: Google Jerry (Hisense Chromebook C11 and more) items: + - const: google,veyron-jerry-rev15 + - const: google,veyron-jerry-rev14 + - const: google,veyron-jerry-rev13 + - const: google,veyron-jerry-rev12 + - const: google,veyron-jerry-rev11 + - const: google,veyron-jerry-rev10 - const: google,veyron-jerry-rev7 - const: google,veyron-jerry-rev6 - const: google,veyron-jerry-rev5 @@ -199,6 +206,17 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Mighty (Haier Chromebook 11 and more w/ SD) + items: + - const: google,veyron-mighty-rev5 + - const: google,veyron-mighty-rev4 + - const: google,veyron-mighty-rev3 + - const: google,veyron-mighty-rev2 + - const: google,veyron-mighty-rev1 + - const: google,veyron-mighty + - const: google,veyron + - const: rockchip,rk3288 + - description: Google Minnie (Asus Chromebook Flip C100P) items: - const: google,veyron-minnie-rev4 @@ -308,6 +326,11 @@ properties: - const: netxeon,r89 - const: rockchip,rk3288 + - description: Orange Pi RK3399 board + items: + - const: rockchip,rk3399-orangepi + - const: rockchip,rk3399 + - description: Phytec phyCORE-RK3288 Rapid Development Kit items: - const: phytec,rk3288-pcm-947 diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt deleted file mode 100644 index 9254cbe7d516..000000000000 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ /dev/null @@ -1,23 +0,0 @@ -Allwinner sunXi Platforms Device Tree Bindings - -Each device tree must specify which Allwinner SoC it uses, -using one of the following compatible strings: - - allwinner,sun4i-a10 - allwinner,sun5i-a10s - allwinner,sun5i-a13 - allwinner,sun5i-r8 - allwinner,sun6i-a31 - allwinner,sun7i-a20 - allwinner,sun8i-a23 - allwinner,sun8i-a33 - allwinner,sun8i-a83t - allwinner,sun8i-h2-plus - allwinner,sun8i-h3 - allwinner,sun8i-r40 - allwinner,sun8i-t3 - allwinner,sun8i-v3s - allwinner,sun9i-a80 - allwinner,sun50i-a64 - allwinner,suniv-f1c100s - nextthing,gr8 diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml new file mode 100644 index 000000000000..285f4fc8519d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -0,0 +1,807 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR X11) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sunxi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner platforms device tree bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + + - description: Allwinner A23 Evaluation Board + items: + - const: allwinner,sun8i-a23-evb + - const: allwinner,sun8i-a23 + + - description: Allwinner A31 APP4 Evaluation Board + items: + - const: allwinner,app4-evb1 + - const: allwinner,sun6i-a31 + + - description: Allwinner A83t Homlet Evaluation Board v2 + items: + - const: allwinner,h8homlet-v2 + - const: allwinner,sun8i-a83t + + - description: Allwinner GA10H Quad Core Tablet v1.1 + items: + - const: allwinner,ga10h-v1.1 + - const: allwinner,sun8i-a33 + + - description: Allwinner GT90H Tablet v4 + items: + - const: allwinner,gt90h-v4 + - const: allwinner,sun8i-a23 + + - description: Allwinner R16 EVB (Parrot) + items: + - const: allwinner,parrot + - const: allwinner,sun8i-a33 + + - description: Amarula A64 Relic + items: + - const: amarula,a64-relic + - const: allwinner,sun50i-a64 + + - description: Auxtek T003 A10s HDMI TV Stick + items: + - const: allwinner,auxtek-t003 + - const: allwinner,sun5i-a10s + + - description: Auxtek T004 A10s HDMI TV Stick + items: + - const: allwinner,auxtek-t004 + - const: allwinner,sun5i-a10s + + - description: BA10 TV Box + items: + - const: allwinner,ba10-tvbox + - const: allwinner,sun4i-a10 + + - description: BananaPi + items: + - const: lemaker,bananapi + - const: allwinner,sun7i-a20 + + - description: BananaPi M1 Plus + items: + - const: sinovoip,bpi-m1-plus + - const: allwinner,sun7i-a20 + + - description: BananaPi M2 + items: + - const: sinovoip,bpi-m2 + - const: allwinner,sun6i-a31s + + - description: BananaPi M2 Berry + items: + - const: sinovoip,bpi-m2-berry + - const: allwinner,sun8i-r40 + + - description: BananaPi M2 Plus + items: + - const: sinovoip,bpi-m2-plus + - const: allwinner,sun8i-h3 + + - description: BananaPi M2 Plus + items: + - const: sinovoip,bpi-m2-plus + - const: allwinner,sun50i-h5 + + - description: BananaPi M2 Plus v1.2 + items: + - const: bananapi,bpi-m2-plus-v1.2 + - const: allwinner,sun8i-h3 + + - description: BananaPi M2 Plus v1.2 + items: + - const: bananapi,bpi-m2-plus-v1.2 + - const: allwinner,sun50i-h5 + + - description: BananaPi M2 Magic + items: + - const: sinovoip,bananapi-m2m + - const: allwinner,sun8i-a33 + + - description: BananaPi M2 Ultra + items: + - const: sinovoip,bpi-m2-ultra + - const: allwinner,sun8i-r40 + + - description: BananaPi M2 Zero + items: + - const: sinovoip,bpi-m2-zero + - const: allwinner,sun8i-h2-plus + + - description: BananaPi M3 + items: + - const: sinovoip,bpi-m3 + - const: allwinner,sun8i-a83t + + - description: BananaPi M64 + items: + - const: sinovoip,bananapi-m64 + - const: allwinner,sun50i-a64 + + - description: BananaPro + items: + - const: lemaker,bananapro + - const: allwinner,sun7i-a20 + + - description: Beelink GS1 + items: + - const: azw,beelink-gs1 + - const: allwinner,sun50i-h6 + + - description: Beelink X2 + items: + - const: roofull,beelink-x2 + - const: allwinner,sun8i-h3 + + - description: Chuwi V7 CW0825 + items: + - const: chuwi,v7-cw0825 + - const: allwinner,sun4i-a10 + + - description: Colorfly E708 Q1 Tablet + items: + - const: colorfly,e708-q1 + - const: allwinner,sun6i-a31s + + - description: CSQ CS908 Set Top Box + items: + - const: csq,cs908 + - const: allwinner,sun6i-a31s + + - description: Cubietech Cubieboard + items: + - const: cubietech,a10-cubieboard + - const: allwinner,sun4i-a10 + + - description: Cubietech Cubieboard2 + items: + - const: cubietech,cubieboard2 + - const: allwinner,sun7i-a20 + + - description: Cubietech Cubieboard4 + items: + - const: cubietech,a80-cubieboard4 + - const: allwinner,sun9i-a80 + + - description: Cubietech Cubietruck + items: + - const: cubietech,cubietruck + - const: allwinner,sun7i-a20 + + - description: Cubietech Cubietruck Plus + items: + - const: cubietech,cubietruck-plus + - const: allwinner,sun8i-a83t + + - description: Difrnce DIT4350 + items: + - const: difrnce,dit4350 + - const: allwinner,sun5i-a13 + + - description: Dserve DSRV9703C + items: + - const: dserve,dsrv9703c + - const: allwinner,sun4i-a10 + + - description: Empire Electronix D709 Tablet + items: + - const: empire-electronix,d709 + - const: allwinner,sun5i-a13 + + - description: Empire Electronix M712 Tablet + items: + - const: empire-electronix,m712 + - const: allwinner,sun5i-a13 + + - description: FriendlyARM NanoPi A64 + items: + - const: friendlyarm,nanopi-a64 + - const: allwinner,sun50i-a64 + + - description: FriendlyARM NanoPi M1 + items: + - const: friendlyarm,nanopi-m1 + - const: allwinner,sun8i-h3 + + - description: FriendlyARM NanoPi M1 Plus + items: + - const: friendlyarm,nanopi-m1-plus + - const: allwinner,sun8i-h3 + + - description: FriendlyARM NanoPi Neo + items: + - const: friendlyarm,nanopi-neo + - const: allwinner,sun8i-h3 + + - description: FriendlyARM NanoPi Neo 2 + items: + - const: friendlyarm,nanopi-neo2 + - const: allwinner,sun50i-h5 + + - description: FriendlyARM NanoPi Neo Air + items: + - const: friendlyarm,nanopi-neo-air + - const: allwinner,sun8i-h3 + + - description: FriendlyARM NanoPi Neo Plus2 + items: + - const: friendlyarm,nanopi-neo-plus2 + - const: allwinner,sun50i-h5 + + - description: Gemei G9 Tablet + items: + - const: gemei,g9 + - const: allwinner,sun4i-a10 + + - description: Hyundai A7HD + items: + - const: hyundai,a7hd + - const: allwinner,sun4i-a10 + + - description: HSG H702 + items: + - const: hsg,h702 + - const: allwinner,sun5i-a13 + + - description: I12 TV Box + items: + - const: allwinner,i12-tvbox + - const: allwinner,sun7i-a20 + + - description: ICNova A20 SWAC + items: + - const: swac,icnova-a20-swac + - const: incircuit,icnova-a20 + - const: allwinner,sun7i-a20 + + - description: INet-1 + items: + - const: inet-tek,inet1 + - const: allwinner,sun4i-a10 + + - description: iNet-86DZ Rev 01 + items: + - const: primux,inet86dz + - const: allwinner,sun8i-a23 + + - description: iNet-9F Rev 03 + items: + - const: inet-tek,inet9f-rev03 + - const: allwinner,sun4i-a10 + + - description: iNet-97F Rev 02 + items: + - const: primux,inet97fv2 + - const: allwinner,sun4i-a10 + + - description: iNet-98V Rev 02 + items: + - const: primux,inet98v-rev2 + - const: allwinner,sun5i-a13 + + - description: iNet D978 Rev 02 Tablet + items: + - const: primux,inet-d978-rev2 + - const: allwinner,sun8i-a33 + + - description: iNet Q972 Tablet + items: + - const: inet-tek,inet-q972 + - const: allwinner,sun6i-a31s + + - description: Itead Ibox A20 + items: + - const: itead,itead-ibox-a20 + - const: allwinner,sun7i-a20 + + - description: Itead Iteaduino Plus A10 + items: + - const: itead,iteaduino-plus-a10 + - const: allwinner,sun4i-a10 + + - description: Jesurun Q5 + items: + - const: jesurun,q5 + - const: allwinner,sun4i-a10 + + - description: Lamobo R1 + items: + - const: lamobo,lamobo-r1 + - const: allwinner,sun7i-a20 + + - description: Libre Computer Board ALL-H3-CC H2+ + items: + - const: libretech,all-h3-cc-h2-plus + - const: allwinner,sun8i-h2-plus + + - description: Libre Computer Board ALL-H3-CC H3 + items: + - const: libretech,all-h3-cc-h3 + - const: allwinner,sun8i-h3 + + - description: Libre Computer Board ALL-H3-CC H5 + items: + - const: libretech,all-h3-cc-h5 + - const: allwinner,sun50i-h5 + + - description: Lichee Pi One + items: + - const: licheepi,licheepi-one + - const: allwinner,sun5i-a13 + + - description: Lichee Pi Zero + items: + - const: licheepi,licheepi-zero + - const: allwinner,sun8i-v3s + + - description: Lichee Pi Zero (with Dock) + items: + - const: licheepi,licheepi-zero-dock + - const: licheepi,licheepi-zero + - const: allwinner,sun8i-v3s + + - description: Linksprite PCDuino + items: + - const: linksprite,a10-pcduino + - const: allwinner,sun4i-a10 + + - description: Linksprite PCDuino2 + items: + - const: linksprite,a10-pcduino2 + - const: allwinner,sun4i-a10 + + - description: Linksprite PCDuino3 + items: + - const: linksprite,pcduino3 + - const: allwinner,sun7i-a20 + + - description: Linksprite PCDuino3 Nano + items: + - const: linksprite,pcduino3-nano + - const: allwinner,sun7i-a20 + + - description: HAOYU Electronics Marsboard A10 + items: + - const: haoyu,a10-marsboard + - const: allwinner,sun4i-a10 + + - description: MapleBoard MP130 + items: + - const: mapleboard,mp130 + - const: allwinner,sun8i-h3 + + - description: Mele A1000 + items: + - const: mele,a1000 + - const: allwinner,sun4i-a10 + + - description: Mele A1000G Quad Set Top Box + items: + - const: mele,a1000g-quad + - const: allwinner,sun6i-a31 + + - description: Mele I7 Quad Set Top Box + items: + - const: mele,i7 + - const: allwinner,sun6i-a31 + + - description: Mele M3 + items: + - const: mele,m3 + - const: allwinner,sun7i-a20 + + - description: Mele M9 Set Top Box + items: + - const: mele,m9 + - const: allwinner,sun6i-a31 + + - description: Merrii A20 Hummingboard + items: + - const: merrii,a20-hummingbird + - const: allwinner,sun7i-a20 + + - description: Merrii A31 Hummingboard + items: + - const: merrii,a31-hummingbird + - const: allwinner,sun6i-a31 + + - description: Merrii A80 Optimus + items: + - const: merrii,a80-optimus + - const: allwinner,sun9i-a80 + + - description: Miniand Hackberry + items: + - const: miniand,hackberry + - const: allwinner,sun4i-a10 + + - description: MK802 + items: + - const: allwinner,mk802 + - const: allwinner,sun4i-a10 + + - description: MK802-A10s + items: + - const: allwinner,a10s-mk802 + - const: allwinner,sun5i-a10s + + - description: MK802-II + items: + - const: allwinner,mk802ii + - const: allwinner,sun4i-a10 + + - description: MK808c + items: + - const: allwinner,mk808c + - const: allwinner,sun7i-a20 + + - description: MSI Primo81 Tablet + items: + - const: msi,primo81 + - const: allwinner,sun6i-a31s + + - description: Emlid Neutis N5 Developper Board + items: + - const: emlid,neutis-n5-devboard + - const: emlid,neutis-n5 + - const: allwinner,sun50i-h5 + + - description: NextThing Co. CHIP + items: + - const: nextthing,chip + - const: allwinner,sun5i-r8 + - const: allwinner,sun5i-a13 + + - description: NextThing Co. CHIP Pro + items: + - const: nextthing,chip-pro + - const: nextthing,gr8 + + - description: NextThing Co. GR8 Evaluation Board + items: + - const: nextthing,gr8-evb + - const: nextthing,gr8 + + - description: Nintendo NES Classic + items: + - const: nintendo,nes-classic + - const: allwinner,sun8i-r16 + - const: allwinner,sun8i-a33 + + - description: Nintendo Super NES Classic + items: + - const: nintendo,super-nes-classic + - const: nintendo,nes-classic + - const: allwinner,sun8i-r16 + - const: allwinner,sun8i-a33 + + - description: Oceanic 5inMFD (5205) + items: + - const: oceanic,5205-5inmfd + - const: allwinner,sun50i-a64 + + - description: Olimex A10-OlinuXino LIME + items: + - const: olimex,a10-olinuxino-lime + - const: allwinner,sun4i-a10 + + - description: Olimex A10s-OlinuXino Micro + items: + - const: olimex,a10s-olinuxino-micro + - const: allwinner,sun5i-a10s + + - description: Olimex A13-OlinuXino + items: + - const: olimex,a13-olinuxino + - const: allwinner,sun5i-a13 + + - description: Olimex A13-OlinuXino Micro + items: + - const: olimex,a13-olinuxino-micro + - const: allwinner,sun5i-a13 + + - description: Olimex A20-Olimex SOM Evaluation Board + items: + - const: olimex,a20-olimex-som-evb + - const: allwinner,sun7i-a20 + + - description: Olimex A20-Olimex SOM Evaluation Board (with eMMC) + items: + - const: olimex,a20-olimex-som-evb-emmc + - const: allwinner,sun7i-a20 + + - description: Olimex A20-OlinuXino LIME + items: + - const: olimex,a20-olinuxino-lime + - const: allwinner,sun7i-a20 + + - description: Olimex A20-OlinuXino LIME2 + items: + - const: olimex,a20-olinuxino-lime2 + - const: allwinner,sun7i-a20 + + - description: Olimex A20-OlinuXino LIME2 (with eMMC) + items: + - const: olimex,a20-olinuxino-lime2-emmc + - const: allwinner,sun7i-a20 + + - description: Olimex A20-OlinuXino Micro + items: + - const: olimex,a20-olinuxino-micro + - const: allwinner,sun7i-a20 + + - description: Olimex A20-OlinuXino Micro (with eMMC) + items: + - const: olimex,a20-olinuxino-micro-emmc + - const: allwinner,sun7i-a20 + + - description: Olimex A20-SOM204 Evaluation Board + items: + - const: olimex,a20-olimex-som204-evb + - const: allwinner,sun7i-a20 + + - description: Olimex A20-SOM204 Evaluation Board (with eMMC) + items: + - const: olimex,a20-olimex-som204-evb-emmc + - const: allwinner,sun7i-a20 + + - description: Olimex A33-OlinuXino + items: + - const: olimex,a33-olinuxino + - const: allwinner,sun8i-a33 + + - description: Olimex A64-OlinuXino + items: + - const: olimex,a64-olinuxino + - const: allwinner,sun50i-a64 + + - description: Olimex A64 Teres-I + items: + - const: olimex,a64-teres-i + - const: allwinner,sun50i-a64 + + - description: Pine64 + items: + - const: pine64,pine64 + - const: allwinner,sun50i-a64 + + - description: Pine64+ + items: + - const: pine64,pine64-plus + - const: allwinner,sun50i-a64 + + - description: Pine64 PineH64 + items: + - const: pine64,pine-h64 + - const: allwinner,sun50i-h6 + + - description: Pine64 LTS + items: + - const: pine64,pine64-lts + - const: allwinner,sun50i-r18 + - const: allwinner,sun50i-a64 + + - description: Pine64 Pinebook + items: + - const: pine64,pinebook + - const: allwinner,sun50i-a64 + + - description: Pine64 SoPine Baseboard + items: + - const: pine64,sopine-baseboard + - const: pine64,sopine + - const: allwinner,sun50i-a64 + + - description: PineRiver Mini X-Plus + items: + - const: pineriver,mini-xplus + - const: allwinner,sun4i-a10 + + - description: Point of View Protab2-IPS9 + items: + - const: pov,protab2-ips9 + - const: allwinner,sun4i-a10 + + - description: Polaroid MID2407PXE03 Tablet + items: + - const: polaroid,mid2407pxe03 + - const: allwinner,sun8i-a23 + + - description: Polaroid MID2809PXE04 Tablet + items: + - const: polaroid,mid2809pxe04 + - const: allwinner,sun8i-a23 + + - description: Q8 A13 Tablet + items: + - const: allwinner,q8-a13 + - const: allwinner,sun5i-a13 + + - description: Q8 A23 Tablet + items: + - const: allwinner,q8-a23 + - const: allwinner,sun8i-a23 + + - description: Q8 A33 Tablet + items: + - const: allwinner,q8-a33 + - const: allwinner,sun8i-a33 + + - description: Qihua CQA3T BV3 + items: + - const: qihua,t3-cqa3t-bv3 + - const: allwinner,sun8i-t3 + - const: allwinner,sun8i-r40 + + - description: R7 A10s HDMI TV Stick + items: + - const: allwinner,r7-tv-dongle + - const: allwinner,sun5i-a10s + + - description: RerVision H3-DVK + items: + - const: rervision,h3-dvk + - const: allwinner,sun8i-h3 + + - description: Sinlinx SinA31s Core Board + items: + - const: sinlinx,sina31s + - const: allwinner,sun6i-a31s + + - description: Sinlinx SinA31s Development Board + items: + - const: sinlinx,sina31s-sdk + - const: allwinner,sun6i-a31s + + - description: Sinlinx SinA33 + items: + - const: sinlinx,sina33 + - const: allwinner,sun8i-a33 + + - description: TBS A711 Tablet + items: + - const: tbs-biometrics,a711 + - const: allwinner,sun8i-a83t + + - description: Utoo P66 + items: + - const: utoo,p66 + - const: allwinner,sun5i-a13 + + - description: Wexler TAB7200 + items: + - const: wexler,tab7200 + - const: allwinner,sun7i-a20 + + - description: WITS A31 Colombus Evaluation Board + items: + - const: wits,colombus + - const: allwinner,sun6i-a31 + + - description: WITS Pro A20 DKT + items: + - const: wits,pro-a20-dkt + - const: allwinner,sun7i-a20 + + - description: Wobo i5 + items: + - const: wobo,a10s-wobo-i5 + - const: allwinner,sun5i-a10s + + - description: Yones TopTech BS1078 v2 Tablet + items: + - const: yones-toptech,bs1078-v2 + - const: allwinner,sun6i-a31s + + - description: Xunlong OrangePi + items: + - const: xunlong,orangepi + - const: allwinner,sun7i-a20 + + - description: Xunlong OrangePi 2 + items: + - const: xunlong,orangepi-2 + - const: allwinner,sun8i-h3 + + - description: Xunlong OrangePi 3 + items: + - const: xunlong,orangepi-3 + - const: allwinner,sun50i-h6 + + - description: Xunlong OrangePi Lite + items: + - const: xunlong,orangepi-lite + - const: allwinner,sun8i-h3 + + - description: Xunlong OrangePi Lite2 + items: + - const: xunlong,orangepi-lite2 + - const: allwinner,sun50i-h6 + + - description: Xunlong OrangePi Mini + items: + - const: xunlong,orangepi-mini + - const: allwinner,sun7i-a20 + + - description: Xunlong OrangePi One + items: + - const: xunlong,orangepi-one + - const: allwinner,sun8i-h3 + + - description: Xunlong OrangePi One Plus + items: + - const: xunlong,orangepi-one-plus + - const: allwinner,sun50i-h6 + + - description: Xunlong OrangePi PC + items: + - const: xunlong,orangepi-pc + - const: allwinner,sun8i-h3 + + - description: Xunlong OrangePi PC 2 + items: + - const: xunlong,orangepi-pc2 + - const: allwinner,sun50i-h5 + + - description: Xunlong OrangePi PC Plus + items: + - const: xunlong,orangepi-pc-plus + - const: allwinner,sun8i-h3 + + - description: Xunlong OrangePi Plus + items: + - const: xunlong,orangepi-plus + - const: allwinner,sun8i-h3 + + - description: Xunlong OrangePi Plus 2E + items: + - const: xunlong,orangepi-plus2e + - const: allwinner,sun8i-h3 + + - description: Xunlong OrangePi Prime + items: + - const: xunlong,orangepi-prime + - const: allwinner,sun50i-h5 + + - description: Xunlong OrangePi R1 + items: + - const: xunlong,orangepi-r1 + - const: allwinner,sun8i-h2-plus + + - description: Xunlong OrangePi Win + items: + - const: xunlong,orangepi-win + - const: allwinner,sun50i-a64 + + - description: Xunlong OrangePi Zero + items: + - const: xunlong,orangepi-zero + - const: allwinner,sun8i-h2-plus + + - description: Xunlong OrangePi Zero Plus + items: + - const: xunlong,orangepi-zero-plus + - const: allwinner,sun50i-h5 + + - description: Xunlong OrangePi Zero Plus2 + items: + - const: xunlong,orangepi-zero-plus2 + - const: allwinner,sun50i-h5 + + - description: Xunlong OrangePi Zero Plus2 + items: + - const: xunlong,orangepi-zero-plus2-h3 + - const: allwinner,sun8i-h3 diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt index 85a23f551f02..233eb8294204 100644 --- a/Documentation/devicetree/bindings/bus/ti-sysc.txt +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -94,6 +94,8 @@ Optional properties: - ti,no-idle-on-init interconnect target module should not be idled at init +- ti,no-idle interconnect target module should not be idled + Example: Single instance of MUSB controller on omap4 using interconnect ranges using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000): @@ -131,6 +133,6 @@ using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000): }; }; -Note that other SoCs, such as am335x can have multipe child devices. On am335x +Note that other SoCs, such as am335x can have multiple child devices. On am335x there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA -instance as children of a single interconnet target module. +instance as children of a single interconnect target module. diff --git a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt new file mode 100644 index 000000000000..391ee1a60bed --- /dev/null +++ b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt @@ -0,0 +1,63 @@ +-------------------------------------------------------------------------- +Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using +Zynq MPSoC firmware interface +-------------------------------------------------------------------------- +The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock +tree. It reads required input clock frequencies from the devicetree and acts +as clock provider for all clock consumers of PS clocks. + +See clock_bindings.txt for more information on the generic clock bindings. + +Required properties: + - #clock-cells: Must be 1 + - compatible: Must contain: "xlnx,zynqmp-clk" + - clocks: List of clock specifiers which are external input + clocks to the given clock controller. Please refer + the next section to find the input clocks for a + given controller. + - clock-names: List of clock names which are exteral input clocks + to the given clock controller. Please refer to the + clock bindings for more details. + +Input clocks for zynqmp Ultrascale+ clock controller: + +The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock +inputs. These required clock inputs are: + - pss_ref_clk (PS reference clock) + - video_clk (reference clock for video system ) + - pss_alt_ref_clk (alternative PS reference clock) + - aux_ref_clk + - gt_crx_ref_clk (transceiver reference clock) + +The following strings are optional parameters to the 'clock-names' property in +order to provide an optional (E)MIO clock source: + - swdt0_ext_clk + - swdt1_ext_clk + - gem0_emio_clk + - gem1_emio_clk + - gem2_emio_clk + - gem3_emio_clk + - mio_clk_XX # with XX = 00..77 + - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51 + + +Output clocks are registered based on clock information received +from firmware. Output clocks indexes are mentioned in +include/dt-bindings/clock/xlnx-zynqmp-clk.h. + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + zynqmp_clk: clock-controller { + #clock-cells = <1>; + compatible = "xlnx,zynqmp-clk"; + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>; + clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk"; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index 3c9a57a8443b..9d8bbac27d8b 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -9,6 +9,7 @@ Required properties: "fsl,imx53-sdma" "fsl,imx6q-sdma" "fsl,imx7d-sdma" + "fsl,imx8mq-sdma" The -to variants should be preferred since they allow to determine the correct ROM script addresses needed for the driver to work without additional firmware. diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml new file mode 100644 index 000000000000..8cb136c376fb --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/firmware/intel-ixp4xx-network-processing-engine.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx Network Processing Engine + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small + processor that can load a firmware to perform offloading of networking + and crypto tasks. It also manages the MDIO bus to the ethernet PHYs + on the IXP4xx platform. All IXP4xx platforms have three NPEs at + consecutive memory locations. They are all included in the same + device node since they are not independent of each other. + +properties: + compatible: + oneOf: + - items: + - const: intel,ixp4xx-network-processing-engine + + reg: + minItems: 3 + maxItems: 3 + items: + - description: NPE0 register range + - description: NPE1 register range + - description: NPE2 register range + +required: + - compatible + - reg + +examples: + - | + npe@c8006000 { + compatible = "intel,ixp4xx-network-processing-engine"; + reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt index 614bac55df86..a4fe136be2ba 100644 --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt @@ -17,53 +17,6 @@ Required properties: - "smc" : SMC #0, following the SMCCC - "hvc" : HVC #0, following the SMCCC --------------------------------------------------------------------------- -Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using -Zynq MPSoC firmware interface --------------------------------------------------------------------------- -The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock -tree. It reads required input clock frequencies from the devicetree and acts -as clock provider for all clock consumers of PS clocks. - -See clock_bindings.txt for more information on the generic clock bindings. - -Required properties: - - #clock-cells: Must be 1 - - compatible: Must contain: "xlnx,zynqmp-clk" - - clocks: List of clock specifiers which are external input - clocks to the given clock controller. Please refer - the next section to find the input clocks for a - given controller. - - clock-names: List of clock names which are exteral input clocks - to the given clock controller. Please refer to the - clock bindings for more details. - -Input clocks for zynqmp Ultrascale+ clock controller: - -The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock -inputs. These required clock inputs are: - - pss_ref_clk (PS reference clock) - - video_clk (reference clock for video system ) - - pss_alt_ref_clk (alternative PS reference clock) - - aux_ref_clk - - gt_crx_ref_clk (transceiver reference clock) - -The following strings are optional parameters to the 'clock-names' property in -order to provide an optional (E)MIO clock source: - - swdt0_ext_clk - - swdt1_ext_clk - - gem0_emio_clk - - gem1_emio_clk - - gem2_emio_clk - - gem3_emio_clk - - mio_clk_XX # with XX = 00..77 - - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51 - - -Output clocks are registered based on clock information received -from firmware. Output clocks indexes are mentioned in -include/dt-bindings/clock/xlnx,zynqmp-clk.h. - ------- Example ------- @@ -72,11 +25,6 @@ firmware { zynqmp_firmware: zynqmp-firmware { compatible = "xlnx,zynqmp-firmware"; method = "smc"; - zynqmp_clk: clock-controller { - #clock-cells = <1>; - compatible = "xlnx,zynqmp-clk"; - clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>; - clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk"; - }; + ... }; }; diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt new file mode 100644 index 000000000000..3052bf619dd5 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt @@ -0,0 +1,25 @@ +Devicetree bindings for Zynq Ultrascale MPSoC FPGA Manager. +The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the +Programmable Logic (PL). The configuration uses the firmware interface. + +Required properties: +- compatible: should contain "xlnx,zynqmp-pcap-fpga" + +Example for full FPGA configuration: + + fpga-region0 { + compatible = "fpga-region"; + fpga-mgr = <&zynqmp_pcap>; + #address-cells = <0x1>; + #size-cells = <0x1>; + }; + + firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + zynqmp_pcap: pcap { + compatible = "xlnx,zynqmp-pcap-fpga"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt index 18a2cde2e5f3..1b1a74129141 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -37,6 +37,20 @@ Optional properties: - operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt for details. +- resets : Phandle of the GPU reset line. + +Vendor-specific bindings +------------------------ + +The Mali GPU is integrated very differently from one SoC to +another. In order to accomodate those differences, you have the option +to specify one more vendor-specific compatible, among: + +- "amlogic,meson-gxm-mali" + Required properties: + - resets : Should contain phandles of : + + GPU reset line + + GPU APB glue reset line Example for a Mali-T760: diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt index 6ced829b0e58..41b76762953a 100644 --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -21,8 +21,6 @@ Optional properties: Example: fan0: pwm-fan { compatible = "pwm-fan"; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; pwms = <&pwm 0 10000 0>; cooling-levels = <0 102 170 230>; diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt index 5c184b940669..f1f3a552459b 100644 --- a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt @@ -10,6 +10,7 @@ Required properties: - clocks: The root clock of the ADC controller - clock-names: Must contain "adc", matching entry in the clocks property - vref-supply: The regulator supply ADC reference voltage +- #io-channel-cells: Must be 1 as per ../iio-bindings.txt Example: adc1: adc@30610000 { @@ -19,4 +20,5 @@ adc1: adc@30610000 { clocks = <&clks IMX7D_ADC_ROOT_CLK>; clock-names = "adc"; vref-supply = <®_vcc_3v3_mcu>; + #io-channel-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt index c81993f8d8c3..c8787688122a 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt @@ -13,6 +13,7 @@ VADC node: Definition: Should contain "qcom,spmi-vadc". Should contain "qcom,spmi-adc5" for PMIC5 ADC driver. Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver. + Should contain "qcom,pms405-adc" for PMS405 PMIC - reg: Usage: required diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml new file mode 100644 index 000000000000..bae10e261fa9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt/intel-ixp4xx-interrupt.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx XScale Networking Processors Interrupt Controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This interrupt controller is found in the Intel IXP4xx processors. + Some processors have 32 interrupts, some have up to 64 interrupts. + The exact number of interrupts is determined from the compatible + string. + + The distinct IXP4xx families with different interrupt controller + variations are IXP42x, IXP43x, IXP45x and IXP46x. Those four + families were the only ones to reach the developer and consumer + market. + +properties: + compatible: + items: + - enum: + - intel,ixp42x-interrupt + - intel,ixp43x-interrupt + - intel,ixp45x-interrupt + - intel,ixp46x-interrupt + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + +examples: + - | + intcon: interrupt-controller@c8003000 { + compatible = "intel,ixp43x-interrupt"; + reg = <0xc8003000 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt index c5d589108a94..0e312fea2a5d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt @@ -1,15 +1,18 @@ -+Mediatek MT65xx/MT67xx/MT81xx sysirq +MediaTek sysirq -Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI +MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI interrupt. Required properties: - compatible: should be + "mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516 + "mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183 "mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173 "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135 "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127 "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622 "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623 + "mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629 "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795 "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797 "mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765 diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt new file mode 100644 index 000000000000..bcc36c5b543c --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.txt @@ -0,0 +1,35 @@ +Freescale Multi Mode DDR controller (MMDC) + +Required properties : +- compatible : should be one of following: + for i.MX6Q/i.MX6DL: + - "fsl,imx6q-mmdc"; + for i.MX6QP: + - "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc"; + for i.MX6SL: + - "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; + for i.MX6SLL: + - "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; + for i.MX6SX: + - "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; + for i.MX6UL/i.MX6ULL/i.MX6ULZ: + - "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; + for i.MX7ULP: + - "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc"; +- reg : address and size of MMDC DDR controller registers + +Optional properties : +- clocks : the clock provided by the SoC to access the MMDC registers + +Example : + mmdc0: memory-controller@21b0000 { /* MMDC0 */ + compatible = "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>; + }; + + mmdc1: memory-controller@21b4000 { /* MMDC1 */ + compatible = "fsl,imx6q-mmdc"; + reg = <0x021b4000 0x4000>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml new file mode 100644 index 000000000000..d2313b1d9405 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/misc/intel-ixp4xx-ahb-queue-manager.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx AHB Queue Manager + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The IXP4xx AHB Queue Manager maintains queues as circular buffers in + an 8KB embedded SRAM along with hardware pointers. It is used by both + the XScale processor and the NPEs (Network Processing Units) in the + IXP4xx for accelerating queues, especially for networking. Clients pick + queues from the queue manager with foo-queue = <&qmgr N> where the + &qmgr is a phandle to the queue manager and N is the queue resource + number. The queue resources available and their specific purpose + on a certain IXP4xx system will vary. + +properties: + compatible: + items: + - const: intel,ixp4xx-ahb-queue-manager + + reg: + maxItems: 1 + + interrupts: + items: + - description: Interrupt for queues 0-31 + - description: Interrupt for queues 32-63 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + qmgr: queue-manager@60000000 { + compatible = "intel,ixp4xx-ahb-queue-manager"; + reg = <0x60000000 0x4000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt index 07242d141773..36c4bea675d5 100644 --- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt @@ -13,6 +13,8 @@ Required Properties: * compatible: should be one of the following. - "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions. + - "hisilicon,hi3670-dw-mshc", "hisilicon,hi3660-dw-mshc": for controllers + with hi3670 specific extensions. - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions. - "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions. diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt index 1cd050b4054c..0fdc3dd1125e 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt +++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt @@ -16,7 +16,9 @@ Device Tree Bindings: --------------------- Required properties: -- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs +- compatible: should be one of the following : + - "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs + - "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs - #power-domain-cells: should be 0 - amlogic,hhi-sysctrl: phandle to the HHI sysctrl node - resets: phandles to the reset lines needed for this power demain sequence diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt index 2bf3344b2a02..2df4bddeb688 100644 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt @@ -5,11 +5,12 @@ Please also refer to reset.txt in this directory for common reset controller binding usage. The reset controller registers are part of the system-ctl block on -hi3660 SoC. +hi3660 and hi3670 SoCs. Required properties: -- compatible: should be - "hisilicon,hi3660-reset" +- compatible: should be one of the following: + "hisilicon,hi3660-reset" for HI3660 + "hisilicon,hi3670-reset", "hisilicon,hi3660-reset" for HI3670 - hisi,rst-syscon: phandle of the reset's syscon. - #reset-cells : Specifies the number of cells needed to encode a reset source. The type shall be a <u32> and the value shall be 2. diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index bcfb13194f16..c6b5262eb352 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -1,4 +1,4 @@ -* Mediatek Universal Asynchronous Receiver/Transmitter (UART) +* MediaTek Universal Asynchronous Receiver/Transmitter (UART) Required properties: - compatible should contain: @@ -13,10 +13,12 @@ Required properties: * "mediatek,mt6797-uart" for MT6797 compatible UARTS * "mediatek,mt7622-uart" for MT7622 compatible UARTS * "mediatek,mt7623-uart" for MT7623 compatible UARTS + * "mediatek,mt7629-uart" for MT7629 compatible UARTS * "mediatek,mt8127-uart" for MT8127 compatible UARTS * "mediatek,mt8135-uart" for MT8135 compatible UARTS * "mediatek,mt8173-uart" for MT8173 compatible UARTS * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS + * "mediatek,mt8516-uart" for MT8516 compatible UARTS * "mediatek,mt6577-uart" for MT6577 and all of the above - reg: The base address of the UART register bank. diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index 5a2ef1726e2a..7a32404c6114 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -25,6 +25,7 @@ Required properties in pwrap device node. "mediatek,mt8135-pwrap" for MT8135 SoCs "mediatek,mt8173-pwrap" for MT8173 SoCs "mediatek,mt8183-pwrap" for MT8183 SoCs + "mediatek,mt8516-pwrap" for MT8516 SoCs - interrupts: IRQ for pwrap in SOC - reg-names: Must include the following entries: "pwrap": Main registers base diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt index d6fe16f094af..876693a7ada5 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt @@ -23,6 +23,7 @@ Required properties: - "mediatek,mt7622-scpsys" - "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys": For MT7623 SoC - "mediatek,mt7623a-scpsys": For MT7623A SoC + - "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC - "mediatek,mt8173-scpsys" - #power-domain-cells: Must be 1 - reg: Address range of the SCPSYS unit @@ -33,8 +34,8 @@ Required properties: Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif" Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec" Required clocks for MT6797: "mm", "mfg", "vdec" - Required clocks for MT7622: "hif_sel" - Required clocks for MT7622A: "ethif" + Required clocks for MT7622 or MT7629: "hif_sel" + Required clocks for MT7623A: "ethif" Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" Optional properties: diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml new file mode 100644 index 000000000000..a36a0746c056 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/timer/intel-ixp4xx-timer.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx XScale Networking Processors Timers + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: This timer is found in the Intel IXP4xx processors. + +properties: + compatible: + items: + - const: intel,ixp4xx-timer + + reg: + description: Should contain registers location and length + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: Timer 1 interrupt + - description: Timer 2 interrupt + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + timer@c8005000 { + compatible = "intel,ixp4xx-timer"; + reg = <0xc8005000 0x100>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index ff7c567a7972..74c3eadad844 100644 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -17,6 +17,7 @@ Required properties: * "mediatek,mt8127-timer" for MT8127 compatible timers (GPT) * "mediatek,mt8135-timer" for MT8135 compatible timers (GPT) * "mediatek,mt8173-timer" for MT8173 compatible timers (GPT) + * "mediatek,mt8516-timer" for MT8516 compatible timers (GPT) * "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT) For those SoCs that use SYST diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index 56bccde9953a..a74720486ee2 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -11,6 +11,7 @@ Required properties: the appropriate jedec string: "qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0" "qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0" + "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0" "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0" - interrupts : <interrupt mapping for UFS host controller IRQ> - reg : <registers mapping> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index e0e216002efd..e9034a6c003a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -56,6 +56,7 @@ avnet Avnet, Inc. axentia Axentia Technologies AB axis Axis Communications AB azoteq Azoteq (Pty) Ltd +azw Shenzhen AZW Technology Co., Ltd. bananapi BIPAI KEJI LIMITED bhf Beckhoff Automation GmbH & Co. KG bitmain Bitmain Technologies @@ -213,6 +214,7 @@ kinetic Kinetic Technologies kingdisplay King & Display Technology Co., Ltd. kingnovel Kingnovel Technology Co., Ltd. kionix Kionix, Inc. +kobo Rakuten Kobo Inc. koe Kaohsiung Opto-Electronics Inc. kosagi Sutajio Ko-Usagi PTE Ltd. kyo Kyocera Corporation @@ -248,6 +250,7 @@ melexis Melexis N.V. melfas MELFAS Inc. mellanox Mellanox Technologies memsic MEMSIC Inc. +menlo Menlo Systems GmbH merrii Merrii Technology Co., Ltd. micrel Micrel Inc. microchip Microchip Technology Inc. @@ -291,6 +294,7 @@ nuvoton Nuvoton Technology Corporation nvd New Vision Display nvidia NVIDIA nxp NXP Semiconductors +oceanic Oceanic Systems (UK) Ltd. okaya Okaya Electric America, Inc. oki Oki Electric Industry Co., Ltd. olimex OLIMEX Ltd. @@ -360,6 +364,7 @@ sandisk Sandisk Corporation sbs Smart Battery System schindler Schindler seagate Seagate Technology PLC +seirobotics Shenzhen SEI Robotics Co., Ltd semtech Semtech Corporation sensirion Sensirion AG sff Small Form Factor Committee @@ -368,6 +373,7 @@ sgx SGX Sensortech sharp Sharp Corporation shimafuji Shimafuji Electric, Inc. si-en Si-En Technology Ltd. +si-linux Silicon Linux Corporation sifive SiFive, Inc. sigma Sigma Designs, Inc. sii Seiko Instruments, Inc. @@ -422,6 +428,7 @@ toumaz Toumaz tpk TPK U.S.A. LLC tplink TP-LINK Technologies Co., Ltd. tpo TPO +tq TQ Systems GmbH tronfy Tronfy tronsmart Tronsmart truly Truly Semiconductors Limited diff --git a/Documentation/xilinx/eemi.txt b/Documentation/xilinx/eemi.txt index 0ab686c173be..5f39b4ffdcd4 100644 --- a/Documentation/xilinx/eemi.txt +++ b/Documentation/xilinx/eemi.txt @@ -41,8 +41,8 @@ Example of EEMI ops usage: int ret; eemi_ops = zynqmp_pm_get_eemi_ops(); - if (!eemi_ops) - return -ENXIO; + if (IS_ERR(eemi_ops)) + return PTR_ERR(eemi_ops); ret = eemi_ops->query_data(qdata, ret_payload); diff --git a/MAINTAINERS b/MAINTAINERS index 1da6c88144ca..8d9dffc96a42 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1721,11 +1721,21 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained ARM/INTEL IXP4XX ARM ARCHITECTURE +M: Linus Walleij <linusw@kernel.org> M: Imre Kaloz <kaloz@openwrt.org> M: Krzysztof Halasa <khalasa@piap.pl> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +F: Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml +F: Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt +F: Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +F: Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml F: arch/arm/mach-ixp4xx/ +F: drivers/clocksource/timer-ixp4xx.c +F: drivers/gpio/gpio-ixp4xx.c +F: drivers/irqchip/irq-ixp4xx.c +F: include/linux/irqchip/irq-ixp4xx.h +F: include/linux/platform_data/timer-ixp4xx.h ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT M: Jonathan Cameron <jic23@cam.ac.uk> @@ -2021,7 +2031,7 @@ W: http://www.armlinux.org.uk/ S: Maintained ARM/QUALCOMM SUPPORT -M: Andy Gross <andy.gross@linaro.org> +M: Andy Gross <agross@kernel.org> M: David Brown <david.brown@linaro.org> L: linux-arm-msm@vger.kernel.org S: Maintained @@ -2226,6 +2236,7 @@ F: arch/arm/mach-socfpga/ F: arch/arm/boot/dts/socfpga* F: arch/arm/configs/socfpga_defconfig F: arch/arm64/boot/dts/altera/ +F: arch/arm64/boot/dts/intel/ W: http://www.rocketboards.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git @@ -7976,10 +7987,10 @@ F: Documentation/media/v4l-drivers/ipu3.rst INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT M: Krzysztof Halasa <khalasa@piap.pl> S: Maintained -F: arch/arm/mach-ixp4xx/include/mach/qmgr.h -F: arch/arm/mach-ixp4xx/include/mach/npe.h -F: arch/arm/mach-ixp4xx/ixp4xx_qmgr.c -F: arch/arm/mach-ixp4xx/ixp4xx_npe.c +F: include/linux/soc/ixp4xx/qmgr.h +F: include/linux/soc/ixp4xx/npe.h +F: drivers/soc/ixp4xx/ixp4xx-qmgr.c +F: drivers/soc/ixp4xx/ixp4xx-npe.c F: drivers/net/ethernet/xscale/ixp4xx_eth.c F: drivers/net/wan/ixp4xx_hss.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dc9855c4a3b4..901bf1b79138 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -425,12 +425,15 @@ config ARCH_IXP4XX depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK select ARCH_SUPPORTS_BIG_ENDIAN - select CLKSRC_MMIO select CPU_XSCALE select DMABOUNCE if PCI select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_MULTI_HANDLER + select GPIO_IXP4XX select GPIOLIB select HAVE_PCI + select IXP4XX_IRQ + select IXP4XX_TIMER select NEED_MACH_IO_H select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -896,8 +899,6 @@ config PLAT_PXA config PLAT_VERSATILE bool -source "arch/arm/firmware/Kconfig" - source "arch/arm/mm/Kconfig" config IWMMXT diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e388af4594a6..9a8862fee738 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1676,6 +1676,7 @@ config DEBUG_UART_PHYS default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1 default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4 default 0xe8008000 if DEBUG_R7S72100_SCIF2 + default 0xf0000000 if DEBUG_DIGICOLOR_UA0 default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE @@ -1727,6 +1728,7 @@ config DEBUG_UART_VIRT default 0xe0010fe0 if ARCH_RPC default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART + default 0xf0100000 if DEBUG_DIGICOLOR_UA0 default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 default 0xf1000300 if DEBUG_BCM_5301X diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1f7bbde5e23e..333ba213d2a5 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -286,7 +286,6 @@ core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ core-y += arch/arm/probes/ core-y += arch/arm/net/ core-y += arch/arm/crypto/ -core-y += arch/arm/firmware/ core-y += $(machdirs) $(platdirs) drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ diff --git a/arch/arm/arm-soc-for-next-contents.txt b/arch/arm/arm-soc-for-next-contents.txt new file mode 100644 index 000000000000..7bf11e04a898 --- /dev/null +++ b/arch/arm/arm-soc-for-next-contents.txt @@ -0,0 +1,201 @@ +arm/soc + patch + ARM: stm32: add AMBA support for stm32 family + omap/soc + git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.2/soc-signed + omap/ti-sysc + git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.2/ti-sysc-signed + samsung/soc + https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux tags/samsung-soc-5.2 + pxa/devel + https://github.com/rjarzmik/linux tags/pxa-for-5.2 + davinci/soc + git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci tags/davinci-for-v5.2/soc + patch + ARM: ep93xx: move network platform data to separate header + ARM: ep93xx: keypad: stop using mach/platform.h + ARM: ep93xx: move pinctrl interfaces into include/linux/soc + ARM: ep93xx: move private headers out of mach/* + ARM: u300: regulator: add MODULE_LICENSE() + socfpga/maintainers + git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux tags/maintainers_for_v5.2 + patch + ARM: debug-ll: add default address for digicolor + tegra/firmware + git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-5.2-firmware + renesas/soc + https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-arm-soc-for-v5.2 + ipx4xx/cleanup + git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik tags/ixp4xx-for-armsoc + lpc32xx/soc + https://github.com/vzapolskiy/linux-lpc32xx tags/lpc32xx-soc-for-5.2 + imx/soc + git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux tags/imx-soc-5.2 + rockchip/soc32 + git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v5.2-rockchip-soc32-1 + +arm/dt + amlogic/dt64 + https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic tags/amlogic-dt64 + amlogic/dt + https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic tags/amlogic-dt + rockchip/dts32 + git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v5.2-rockchip-dts32-1 + rockchip/dts64 + git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v5.2-rockchip-dts64-1 + renesas/dt64 + https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-arm64-dt-for-v5.2 + aspeed/devicetree + git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed tags/aspeed-5.2-devicetree + stm32/dt + git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 tags/stm32-dt-for-v5.2-1 + samsung/dt + https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux tags/samsung-dt-5.2 + samsung/dt64 + https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux tags/samsung-dt64-5.2 + zynqmp/dt + https://github.com/Xilinx/linux-xlnx tags/zynqmp-dt-for-v5.2 + hisi/arm64-dt + git://github.com/hisilicon/linux-hisi tags/hisi-arm64-dt-for-5.2 + omap/dt + git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.2/dt-signed + omap/dt-ti-sysc + git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.2/dt-ti-sysc-signed + contains omap/ti-sysc + ux500/dts + git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson tags/ux500-dts-v5.2-armsoc + socfpga/dts + git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux tags/socfpga_dts_updates_for_v5.2 + omap/dt-am3 + git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.2/dt-am3-signed + tegra/dt + git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-5.2-arm-dt + tegra/dt64 + git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-5.2-arm64-dt + sunxi/dt + https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux tags/sunxi-dt-for-5.2 + sunxi/dt64 + https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux tags/sunxi-dt64-for-5.2 + sunxi/h3-h5-dt + https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux tags/sunxi-h3-h5-for-5.2 + renesas/dt64-2 + https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-arm64-dt2-for-v5.2 + renesas/dt + https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-arm-dt-for-v5.2 + renesas/dt-bindings + https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-dt-bindings-for-v5.2 + amlogic/dt-2 + https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic tags/amlogic-dt-2 + amlogic/dt64-2 + https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic tags/amlogic-dt64-2 + imx/dt-bindings + git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux tags/imx-bindings-5.2 + imx/dt + git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux tags/imx-dt-5.2 + qcom/arm64 + git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux tags/qcom-arm64-for-5.2 + qcom/dts + git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux tags/qcom-dts-for-5.2 + at91/dt + git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux at91-dt + mvebu/dt + git://git.infradead.org/linux-mvebu tags/mvebu-dt-5.2-1 + mvebu/dt64 + git://git.infradead.org/linux-mvebu tags/mvebu-dt64-5.2-1 + patch + dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties + mediatek/dts64 + https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux tags/v5.1-next-dts64 + rockchip/dts32-2 + git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v5.2-rockchip-dts32-2 + rockchip/dts64-2 + git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v5.2-rockchip-dts64-2 + qcom/dts-1 + git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux tags/qcom-dts-for-5.2-1 + qcom/arm64-1 + git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux tags/qcom-arm64-for-5.2-1 + patch + ARM: dts: gemini: Indent DIR-685 partition table + samsung/dt-2 + https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux tags/samsung-dt-5.2-2 + samsung/dt64-2 + https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux tags/samsung-dt64-5.2-2 + lpc32xx/dt + https://github.com/vzapolskiy/linux-lpc32xx tags/lpc32xx-dt-for-5.2 + imx/dt64 + git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux tags/imx-dt64-5.2 + bitmain/soc + git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-bitmain tags/bitmain-soc-5.2 + +arm/drivers + amlogic/drivers + https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic tags/amlogic-drivers + omap/am4-pm + git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v5.2/am4-pm-v2-signed + zynqmp/soc + https://github.com/Xilinx/linux-xlnx tags/zynqmp-soc-for-v5.2 + drivers/scmi + git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux tags/scmi-fixes-5.2 + drivers/tee + http://git.linaro.org:/people/jens.wiklander/linux-tee tags/tee-optee-for-5.2 + tegra/bus + git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-5.2-bus + tegra/soc-drivers + git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-5.2-soc + tegra/memory + git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-5.2-memory + tegra/soc + git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-5.2-arm-soc + renesas/drivers + https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-drivers-for-v5.2 + amlogic/drivers-2 + https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic tags/amlogic-drivers-2 + patch + spi: zynqmp: Fix build break + imx/drivers + git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux tags/imx-drivers-5.2 + patch + soc: add aspeed folder and misc drivers + qcom/drivers + git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux tags/qcom-drivers-for-5.2 + mediatek/soc + https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux tags/v5.1-next-soc + drivers/reset + git://git.pengutronix.de/pza/linux tags/reset-for-5.2 + rockchip/drivers + git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v5.2-rockchip-drivers-1 + patch + soc: aspeed: fix Kconfig + +arm/defconfig + amlogic/defconfig + https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic tags/amlogic-defconfig + patch + ARM: multi_v7_defconfig: Enable support for STPMIC1 + socfpga/defconfig + git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux tags/arm64_defconfig_for_v5.2 + omap/defconfig + git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/multi-v7-defconfig-for-v5.2-signed + patch + arm64: defconfig: Update UFSHCD for Hi3660 soc + tegra/defconfig + git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-5.2-arm-defconfig + tegra/defconfig64 + git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux tags/tegra-for-5.2-arm64-defconfig + sunxi/defconfig64 + https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux tags/sunxi-config64-for-5.2 + renesas/arm64-defconfig + https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-arm64-defconfig-for-v5.2 + renesas/arm-defconfig + https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-arm-defconfig-for-v5.2 + qcom/defconfig + git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux tags/qcom-defconfig-for-5.2 + mvebu/arm64 + git://git.infradead.org/linux-mvebu tags/mvebu-arm64-5.2-1 + rockchip/defconfig32 + git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v5.2-rockchip-defconfig32-1 + +arm/late + +arm/fixes + diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f4f5aeaf3298..dab2914fa293 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -229,6 +229,9 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \ dtb-$(CONFIG_ARCH_INTEGRATOR) += \ integratorap.dtb \ integratorcp.dtb +dtb-$(CONFIG_ARCH_IXP4XX) += \ + intel-ixp42x-linksys-nslu2.dtb \ + intel-ixp43x-gateworks-gw2358.dtb dtb-$(CONFIG_ARCH_KEYSTONE) += \ keystone-k2hk-evm.dtb \ keystone-k2l-evm.dtb \ @@ -363,7 +366,8 @@ dtb-$(CONFIG_SOC_IMX35) += \ imx35-eukrea-mbimxsd35-baseboard.dtb \ imx35-pdk.dtb dtb-$(CONFIG_SOC_IMX50) += \ - imx50-evk.dtb + imx50-evk.dtb \ + imx50-kobo-aura.dtb dtb-$(CONFIG_SOC_IMX51) += \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ @@ -380,6 +384,7 @@ dtb-$(CONFIG_SOC_IMX53) += \ imx53-kp-ddc.dtb \ imx53-kp-hsc.dtb \ imx53-m53evk.dtb \ + imx53-m53menlo.dtb \ imx53-mba53.dtb \ imx53-ppd.dtb \ imx53-qsb.dtb \ @@ -400,6 +405,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ imx6dl-dfi-fs700-m60.dtb \ + imx6dl-eckelmann-ci4x10.dtb \ imx6dl-emcon-avari.dtb \ imx6dl-gw51xx.dtb \ imx6dl-gw52xx.dtb \ @@ -579,6 +585,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ + imx7d-mba7.dtb \ imx7d-nitrogen7.dtb \ imx7d-pico-hobbit.dtb \ imx7d-pico-pi.dtb \ @@ -586,7 +593,9 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-sdb.dtb \ imx7d-sdb-reva.dtb \ imx7d-sdb-sht11.dtb \ + imx7d-zii-rpu2.dtb \ imx7s-colibri-eval-v3.dtb \ + imx7s-mba7.dtb \ imx7s-warp.dtb dtb-$(CONFIG_SOC_IMX7ULP) += \ imx7ulp-evk.dtb @@ -606,6 +615,7 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-zii-dev-rev-b.dtb \ vf610-zii-dev-rev-c.dtb \ vf610-zii-scu4-aib.dtb \ + vf610-zii-spb4.dtb \ vf610-zii-ssmb-dtu.dtb \ vf610-zii-ssmb-spu3.dtb dtb-$(CONFIG_ARCH_MXS) += \ @@ -909,6 +919,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-mickey.dtb \ + rk3288-veyron-mighty.dtb \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ rk3288-veyron-speedy.dtb \ @@ -964,6 +975,8 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32746g-eval.dtb \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ + stm32mp157a-dk1.dtb \ + stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb dtb-$(CONFIG_MACH_SUN4I) += \ @@ -1091,6 +1104,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-h3-orangepi-zero-plus2.dtb \ + sun8i-h3-rervision-dvk.dtb \ sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-nintendo-nes-classic.dtb \ sun8i-r16-nintendo-super-nes-classic.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts index 50dcf1290ac6..2f650a736b44 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts @@ -23,14 +23,14 @@ &am33xx_pinmux { uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts index f3f1abd26470..1ba66d5e21e8 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -23,35 +23,35 @@ &am33xx_pinmux { tca6416_pins: pinmux_tca6416_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ - AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */ - AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ - - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ + + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index 42f473f0ed77..eed65fc0e8e6 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -23,43 +23,43 @@ &am33xx_pinmux { tca6416_pins: pinmux_tca6416_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ >; }; dcan1_pins: pinmux_dcan1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */ - AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */ >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ - AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */ - AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ - - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ + + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ >; }; diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi index 3ab1767d5c13..fe75050c016f 100644 --- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi +++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi @@ -42,9 +42,9 @@ &am33xx_pinmux { user_leds: pinmux_user_leds { pinctrl-single,pins = < - AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 PWR LED */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd3.gpio0_16 WLAN LED */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd2.gpio0_17 APP LED */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 PWR LED */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_txd3.gpio0_16 WLAN LED */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mii1_txd2.gpio0_17 APP LED */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index 8c6fc4161ad7..b572ad1f1377 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -53,130 +53,130 @@ &am33xx_pinmux { mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */ - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */ - AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */ + AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLUP, MUX_MODE7) /* emu0.gpio3[7] */ >; }; wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ + AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT_PULLUP, MUX_MODE7) /* emu1.gpio3[8] */ >; }; tps65910_pins: pinmux_tps65910_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_ben1.gpio1[28] */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */ - AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_tx_en.rmii1_txen */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ /* Slave 2 */ - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* Slave 2 reset value*/ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; nandflash_pins_s0: nandflash_pins_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 29782be07605..cbd5bd8c57de 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -46,39 +46,39 @@ &am33xx_pinmux { nxp_hdmi_pins: pinmux_nxp_hdmi_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */ >; }; leds_base_pins: pinmux_leds_base_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn3.gpio2_0 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 456eef57ef89..42cfc3b37c32 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -71,118 +71,118 @@ user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0) >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spio0_cs1.gpio0_6 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spio0_cs1.gpio0_6 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) >; }; emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi index e543c2bee8c2..283e288b6e42 100644 --- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -30,43 +30,43 @@ &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) >; }; mcasp0_pins: mcasp0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ - AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts index 83f49f616b19..5b275c96fccf 100644 --- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -32,35 +32,35 @@ &am33xx_pinmux { bt_pins: pinmux_bt_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gmii1_txd0.gpio0_28 - BT_EN */ >; }; mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */ - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */ - AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ - AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */ - AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* gmii1_rxd2.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* mdio_data.uart3_ctsn */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* mdio_clk.uart3_rtsn */ >; }; wl18xx_pins: pinmux_wl18xx_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */ - AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gmii1_rxclk.gpio3_10 LS_BUF_EN */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gmii1_txclk.gpio3_9 WL_EN */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_refclk.gpio0_29 WL_IRQ */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gmii1_rxclk.gpio3_10 LS_BUF_EN */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index ccb147e70d17..8d241c856c8d 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -130,135 +130,135 @@ &am33xx_pinmux { user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ - AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ - AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ - AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */ - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */ + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ >; }; /* UT0 */ uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; /* UT1 */ uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* (D16) uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (D15) uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; /* GPS */ uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE1) /* (A17) spi0_sclk.uart2_rxd */ - AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (B17) spi0_d0.uart2_txd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1) /* (A17) spi0_sclk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (B17) spi0_d0.uart2_txd */ >; }; /* DSM2 */ uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ >; }; /* UT5 */ uart5_pins: pinmux_uart5_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8C4, PIN_INPUT_PULLUP | MUX_MODE4) /* (U2) lcd_data9.uart5_rxd */ - AM33XX_IOPAD(0x8C0, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* (U1) lcd_data8.uart5_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* (U2) lcd_data9.uart5_rxd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* (U1) lcd_data8.uart5_txd */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* (U7) gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* (V7) gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* (R8) gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T8) gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* (U8) gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* (V8) gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* (R9) gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* (T9) gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* (U9) gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* (V9) gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* (U7) gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* (V7) gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* (R8) gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (T8) gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* (U8) gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* (V8) gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* (R9) gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* (T9) gpmc_ad7.mmc1_dat7 */ >; }; mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5) /* (J17) gmii1_rxdv.mmc2_dat0 */ - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5) /* (J18) gmii1_txd3.mmc2_dat1 */ - AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5) /* (K15) gmii1_txd2.mmc2_dat2 */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5) /* (H16) gmii1_col.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6) /* (L15) gmii1_rxd1.mmc2_clk */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6) /* (J16) gmii1_txen.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5) /* (J17) gmii1_rxdv.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5) /* (J18) gmii1_txd3.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5) /* (K15) gmii1_txd2.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5) /* (H16) gmii1_col.mmc2_dat3 */ >; }; bt_pins: pinmux_bt_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ - AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ - AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* (M17) mdio_data.uart3_ctsn */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* (M18) mdio_clk.uart3_rtsn */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* (M17) mdio_data.uart3_ctsn */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* (M18) mdio_clk.uart3_rtsn */ >; }; wl18xx_pins: pinmux_wl18xx_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */ - AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ >; }; /* DCAN */ dcan1_pins: pinmux_dcan1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* (E17) uart0_rtsn.dcan1_rx */ - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* (E18) uart0_ctsn.dcan1_tx */ - AM33XX_IOPAD(0x940, PIN_OUTPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* (E17) uart0_rtsn.dcan1_rx */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* (E18) uart0_ctsn.dcan1_tx */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi index 853e6d3a028d..71317e372ec7 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi +++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi @@ -27,8 +27,8 @@ &am33xx_pinmux { uart2_pins: uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts index 57731f0daf10..7db86a9c836a 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -32,35 +32,35 @@ &am33xx_pinmux { bt_pins: pinmux_bt_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_ad12.gpio1_28 BT_EN */ >; }; mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ - AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ - AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ - AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* gmii1_rxd2.uart3_txd */ - AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3) /* mdio_data.uart3_ctsn */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* mdio_clk.uart3_rtsn */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gmii1_rxd3.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* gmii1_rxd2.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3) /* mdio_data.uart3_ctsn */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* mdio_clk.uart3_rtsn */ >; }; wl18xx_pins: pinmux_wl18xx_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x828, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */ - AM33XX_IOPAD(0x82C, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */ - AM33XX_IOPAD(0x87C, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 LS_BUF_EN */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 LS_BUF_EN */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index bffa5dce54ec..31da68355e57 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -41,79 +41,79 @@ &am33xx_pinmux { uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_clk.mdio_clk */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; usb1_drvvbus: usb1_drvvbus { pinctrl-single,pins = < - AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */ + AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; sd_pins: pinmux_sd_card { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; led_gpio_pins: led_gpio_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */ - AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */ + AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_OUTPUT, MUX_MODE7) /* emu0.gpio3_7 */ + AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT, MUX_MODE7) /* emu1.gpio3_8 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index 1b43ebd08b38..8b88bf6dafc4 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -30,28 +30,28 @@ i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; nandflash_pins: nandflash_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE0) + + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; }; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 2c724bb60417..3b0bb88dfc12 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -94,108 +94,85 @@ i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) - /* i2c0_scl.i2c0_scl */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < /* uart0_ctsn.i2c1_sda */ - AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.i2c1_scl */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) >; }; gpio_led_pins: pinmux_gpio_led_pins { pinctrl-single,pins = < /* gpmc_csn3.gpio2_0 */ - AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE7) >; }; nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < - /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) - /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wpn.gpio0_30 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) - /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) - /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) - /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) - /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) - /* gpmc_ben0_cle.gpmc_ben0_cle */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) - /* uart0_txd.uart0_txd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) - /* uart1_rtsn.uart1_rtsn */ - AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) - /* uart1_txd.uart1_txd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; dcan0_pins: pinmux_dcan0_pins { pinctrl-single,pins = < /* uart1_ctsn.dcan0_tx */ - AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart1_rtsn.dcan0_rx */ - AM33XX_IOPAD(0x97C, PIN_INPUT | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2) >; }; dcan1_pins: pinmux_dcan1_pins { pinctrl-single,pins = < /* uart1_rxd.dcan1_tx */ - AM33XX_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT, MUX_MODE2) /* uart1_txd.dcan1_rx */ - AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE2) >; }; ecap0_pins: pinmux_ecap0_pins { pinctrl-single,pins = < - /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ - AM33XX_IOPAD(0x964, 0x0) + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0) >; }; @@ -203,96 +180,83 @@ pinctrl-single,pins = < /* Slave 1 */ /* mii1_tx_en.rgmii1_tctl */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < - /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) - /* mdio_clk.mdio_clk */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) - /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) - /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) - /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) - /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) - /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) >; }; spi0_pins: pinmux_spi0_pins { pinctrl-single,pins = < - /* spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0) - /* spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) - /* spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0) - /* spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) - /* spi0_cs1.spi0_cs1 */ - AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_OUTPUT, MUX_MODE0) >; }; @@ -300,7 +264,7 @@ bluetooth_pins: pinmux_bluetooth_pins { pinctrl-single,pins = < /* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */ - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLUP, MUX_MODE7) >; }; @@ -308,13 +272,13 @@ mcasp1_pins: pinmux_mcasp1_pins { pinctrl-single,pins = < /* MII1_CRS.mcasp1_aclkx */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* MII1_RX_ER.mcasp1_fsx */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* MII1_COL.mcasp1_axr2 */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE4) + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE4) /* RMII1_REF_CLK.mcasp1_axr3 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) >; }; @@ -322,9 +286,9 @@ wifi_pins: pinmux_wifi_pins { pinctrl-single,pins = < /* EMU1.gpio3_8 - WiFi IRQ */ - AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7) /* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */ - AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7) >; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index edcff79879e7..55d4392bb7a1 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -190,222 +190,222 @@ matrix_keypad_s0: matrix_keypad_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a9.gpio1_25 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a10.gpio1_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.gpio1_27 */ >; }; volume_keys_s0: volume_keys_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* spi0_sclk.gpio0_2 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* spi0_d0.gpio0_3 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d1.i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_cs0.i2c1_scl */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; nandflash_pins_s0: nandflash_pins_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) >; }; ecap0_pins: backlight_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0) >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ >; }; mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ - AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ - AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */ - AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */ - AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */ - AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */ >; }; wlan_pins: pinmux_wlan_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */ - AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ - AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a0.gpio1_16 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT, MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */ >; }; lcd_pins_s0: lcd_pins_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ - AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ - AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ - AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ - AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ - AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; }; mcasp1_pins_sleep: mcasp1_pins_sleep { pinctrl-single,pins = < - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 2c2d8b5b8cf5..8fc8056db94f 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -227,241 +227,241 @@ lcd_pins_default: lcd_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ - AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ - AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ - AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ - AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; lcd_pins_sleep: lcd_pins_sleep { pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */ - AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */ - AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad8.lcd_data23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad9.lcd_data22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad10.lcd_data21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad11.lcd_data20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.lcd_data19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.lcd_data18 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.lcd_data17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.lcd_data16 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ - AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ - AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ - AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad4.gpio1_4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad5.gpio1_5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad6.gpio1_6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad7.gpio1_7 */ >; }; gpio_keys_s0: gpio_keys_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ - AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ - AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; ecap2_pins: backlight_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x99c, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, 0x0, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ /* Slave 2 */ - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* Slave 2 reset value*/ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */ >; }; mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ - AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; }; mcasp1_pins_sleep: mcasp1_pins_sleep { pinctrl-single,pins = < - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ >; }; wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 9ac775c71072..4365684fa66f 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -157,111 +157,111 @@ &am33xx_pinmux { user_leds: user_leds { pinctrl-single,pins = < - AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */ - AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */ - AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */ - AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */ - AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */ >; }; mmc0_pins_default: mmc0_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c0_pins_default: i2c0_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ - AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) >; }; spi0_pins_default: spi0_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* (C15) spi0_cs1.spi0_cs1 */ - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */ >; }; uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ - AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLUP, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1, RMII mode */ - AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x944, (PIN_INPUT_PULLUP | MUX_MODE0)) /* rmii1_refclk.rmii1_refclk */ - AM33XX_IOPAD(0x940, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x910, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxerr.rmii1_rxerr */ - AM33XX_IOPAD(0x928, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x924, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x914, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txen.rmii1_txen */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txen.rmii1_txen */ /* Slave 2, RMII mode */ - AM33XX_IOPAD(0x870, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wait0.rmii2_crs_dv */ - AM33XX_IOPAD(0x908, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_col.rmii2_refclk */ - AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a11.rmii2_rxd0 */ - AM33XX_IOPAD(0x868, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a10.rmii2_rxd1 */ - AM33XX_IOPAD(0x874, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wpn.rmii2_rxerr */ - AM33XX_IOPAD(0x854, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a5.rmii2_txd0 */ - AM33XX_IOPAD(0x850, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a4.rmii2_txd1 */ - AM33XX_IOPAD(0x840, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a0.rmii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_wait0.rmii2_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_col.rmii2_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a11.rmii2_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a10.rmii2_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_wpn.rmii2_rxerr */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a5.rmii2_txd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a4.rmii2_txd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* gpmc_a0.rmii2_txen */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x944, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x940, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x910, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x928, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x924, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x914, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* Slave 2 reset value */ - AM33XX_IOPAD(0x870, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x908, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x868, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x874, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x854, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x850, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x840, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, (PIN_OUTPUT_PULLUP | MUX_MODE0)) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, (PIN_INPUT_PULLDOWN | MUX_MODE7)) - AM33XX_IOPAD(0x94c, (PIN_INPUT_PULLDOWN | MUX_MODE7)) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index cbd22f25de95..312deb6cf6a2 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -57,41 +57,41 @@ &am33xx_pinmux { i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index d0e8e720a4d6..aa4cd2b8d4b6 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -46,109 +46,109 @@ &am33xx_pinmux { mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_int */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rxer */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_txen */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* rmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) /* Slave 2 */ - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */ - AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_int */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_int */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rxer */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_txen */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii1_refclk */ /* Slave 2 reset value*/ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */ - AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */ - AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_rxer */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_int */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* rmii2_refclk */ >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index cb5913a69837..671d4a5da9c4 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -33,54 +33,54 @@ i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; push_button_pins: pinmux_push_button { pinctrl-single,pins = < - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2_23 */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_23 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; mmc1_pins_default: pinmux_mmc1_pins { pinctrl-single,pins = < /* eMMC */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ >; }; spi0_pins: pinmux_spi0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) >; }; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts index 48aee6de4cdb..5923b6e7e1cb 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts +++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts @@ -31,23 +31,23 @@ cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txen.rmii1_txen */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) >; }; spi1_pins: pinmux_spi1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4) /* uart1_ctsn.spi1_cs0 */ - AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_ctsn.spi1_d0 */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_rtsn.spi1_d1 */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart1_ctsn.spi1_cs0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart0_ctsn.spi1_d0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart0_rtsn.spi1_d1 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts index e562ce40f290..5a2fb4bd4e02 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts @@ -104,79 +104,79 @@ minipcie_pins: pinmux_minipcie { pinctrl-single,pins = < - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2_24 */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */ - AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2_24 */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2_25 */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2_22 Power off PIN*/ >; }; push_button_pins: pinmux_push_button { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mcasp0_ahcklx.gpio3_21 */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_ctsn.i2c1_sda */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart0_rtsn.i2c1_scl */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_ctsn.i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart0_rtsn.i2c1_scl */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0) >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE6) /* lcd_data14.uart5_ctsn */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data15.uart5_rtsn */ - AM33XX_IOPAD(0x8c4, PIN_INPUT_PULLUP | MUX_MODE4) /* lcd_data9.uart5_rxd */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE4) /* lcd_data8.uart5_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6) /* lcd_data14.uart5_ctsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* lcd_data15.uart5_rtsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4) /* lcd_data9.uart5_rxd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4) /* lcd_data8.uart5_txd */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) /* Slave 2 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */ - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */ - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rxer */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* rmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3) /* rmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1) /* rmii2_refclk */ >; }; @@ -184,46 +184,46 @@ davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; mmc0_pins_default: pinmux_mmc0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */ - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_14 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkx.gpio3_18 */ >; }; mmc2_pins_default: pinmux_mmc2_pins { pinctrl-single,pins = < /* eMMC */ - AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ - AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */ - AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ - AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad12.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad13.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad14.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad15.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad8.mmc2_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad9.mmc2_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad10.mmc2_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ad11.mmc2_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc2_clk */ >; }; spi0_pins: pinmux_spi0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) >; }; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 9c9143ed4003..0052657331ee 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -41,121 +41,121 @@ misc_pins: misc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7) /* spi0_cs0.gpio0_5 */ >; }; gpmc_pins: gpmc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */ - AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */ - - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */ - AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */ - AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */ - - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */ - - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */ - - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE0) + + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE0) + + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) + + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE1) /* lcd_data1.gpmc_a1 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE1) /* lcd_data2.gpmc_a2 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE1) /* lcd_data3.gpmc_a3 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE1) /* lcd_data4.gpmc_a4 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE1) /* lcd_data5.gpmc_a5 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE1) /* lcd_data6.gpmc_a6 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE1) /* lcd_data7.gpmc_a7 */ + + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE1) /* lcd_vsync.gpmc_a8 */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE1) /* lcd_hsync.gpmc_a9 */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE1) /* lcd_pclk.gpmc_a10 */ >; }; i2c0_pins: i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE0) >; }; uart0_pins: uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0) >; }; uart1_pins: uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */ - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0) >; }; uart2_pins: uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */ - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_INPUT_PULLUP, MUX_MODE7) /* lcd_data8.gpio2[14] */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7) /* lcd_data9.gpio2[15] */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd */ >; }; uart3_pins: uart3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */ - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */ - AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE6) /* lcd_data10.uart3_ctsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE6) /* lcd_data11.uart3_rtsn */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE1) /* spi0_cs1.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT, MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ >; }; uart4_pins: uart4_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */ - AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */ - AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE6) /* lcd_data12.uart4_ctsn */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE6) /* lcd_data13.uart4_rtsn */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE1) /* uart0_ctsn.uart4_rxd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE1) /* uart0_rtsn.uart4_txd */ >; }; uart5_pins: uart5_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */ - AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE4) /* lcd_data14.uart5_rxd */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT, MUX_MODE3) /* rmiii1_refclk.uart5_txd */ >; }; mmc1_pins: mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7) /* emu1.gpio3[8] */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index 95d54cf3849e..f47cc9fea253 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -40,61 +40,61 @@ &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3) >; }; mcasp0_pins: mcasp0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ - AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */ >; }; flash_enable: flash-enable { pinctrl-single,pins = < - AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */ >; }; imu_interrupt: imu-interrupt { pinctrl-single,pins = < - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_rx_er.gpio3_2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_rx_er.gpio3_2 */ >; }; ethernet_interrupt: ethernet-interrupt{ pinctrl-single,pins = < - AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 */ >; }; }; @@ -269,109 +269,109 @@ user_leds_s0: user-leds-s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */ >; }; i2c2_pins: pinmux-i2c2-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */ >; }; uart0_pins: pinmux-uart0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; clkout2_pin: pinmux-clkout2-pin { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; cpsw_default: cpsw-default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_txd3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_txd2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_txclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rxclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) >; }; cpsw_sleep: cpsw-sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci-mdio-default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci-mdio-sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux-mmc1-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) >; }; emmc_pins: pinmux-emmc-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi index f8ff473f94f0..a8b6842489f7 100644 --- a/arch/arm/boot/dts/am335x-osd335x-common.dtsi +++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi @@ -36,8 +36,8 @@ &am33xx_pinmux { i2c0_pins: pinmux-i2c0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; }; diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 1ec8e0d80191..baceaa7bb33b 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -79,15 +79,15 @@ &am33xx_pinmux { user_buttons_pins: pinmux_user_buttons { pinctrl-single,pins = < - AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu0.gpio3_7 */ - AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* emu1.gpio3_8 */ + AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */ + AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */ >; }; user_leds_pins: pinmux_user_leds { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */ - AM33XX_IOPAD(0x884, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */ >; }; }; @@ -96,8 +96,8 @@ &am33xx_pinmux { dcan1_pins: pinmux_dcan1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ - AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ >; }; }; @@ -112,18 +112,18 @@ &am33xx_pinmux { ethernet1_pins: pinmux_ethernet1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ >; }; }; @@ -171,8 +171,8 @@ cb_gpio_pins: pinmux_cb_gpio { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_ctsn.gpio1_8 */ - AM33XX_IOPAD(0x96c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ >; }; }; @@ -181,13 +181,13 @@ &am33xx_pinmux { mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ >; }; }; @@ -205,31 +205,31 @@ &am33xx_pinmux { uart0_pins: pinmux_uart0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart2_pins: pinmux_uart2 { pinctrl-single,pins = < - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ - AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rx_clk.uart2_txd */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ >; }; uart3_pins: pinmux_uart3 { pinctrl-single,pins = < - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd3.uart3_rxd */ - AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd2.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts index ae43d61f4e8b..3141255f72c2 100644 --- a/arch/arm/boot/dts/am335x-pdu001.dts +++ b/arch/arm/boot/dts/am335x-pdu001.dts @@ -92,162 +92,162 @@ i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d1.i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_cs0.i2c1_scl */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_clk.i2c2_sda */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d0.i2c2_scl */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_clk.i2c2_sda */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE2) /* spi0_d0.i2c2_scl */ >; }; spi1_pins: pinmux_spi1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */ - AM33XX_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */ - AM33XX_IOPAD(0x99C, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT, MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT, MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE3) /* mcasp0_axr0.spi1_d1 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT, MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x96C, PIN_OUTPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE1) /* spi0_cs1.uart3_rxd */ - AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1) /* spi0_cs1.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ >; }; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Port 1 (emac0) */ - AM33XX_IOPAD(0x908, PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ - AM33XX_IOPAD(0x90C, PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ - AM33XX_IOPAD(0x910, PIN_INPUT | MUX_MODE0) /* mii1_rxer.mii1_rxer */ - AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE0) /* mii1_txen.mii1_txen */ - AM33XX_IOPAD(0x918, PIN_INPUT | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - AM33XX_IOPAD(0x92c, PIN_INPUT | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - AM33XX_IOPAD(0x930, PIN_INPUT | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - AM33XX_IOPAD(0x934, PIN_INPUT | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT, MUX_MODE0) /* Port 2 (emac1) */ - AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* mii2_txen.gpmc_a0 */ - AM33XX_IOPAD(0x844, PIN_INPUT | MUX_MODE1) /* mii2_rxdv.gpmc_a1 */ - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* mii2_txd3.gpmc_a2 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* mii2_txd2.gpmc_a3 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* mii2_txd1.gpmc_a4 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* mii2_txd0.gpmc_a5 */ - AM33XX_IOPAD(0x858, PIN_INPUT | MUX_MODE1) /* mii2_txclk.gpmc_a6 */ - AM33XX_IOPAD(0x85c, PIN_INPUT | MUX_MODE1) /* mii2_rxclk.gpmc_a7 */ - AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE1) /* mii2_rxd3.gpmc_a8 */ - AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE1) /* mii2_rxd2.gpmc_a9 */ - AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE1) /* mii2_rxd1.gpmc_a10 */ - AM33XX_IOPAD(0x86C, PIN_INPUT | MUX_MODE1) /* mii2_rxd0.gpmc_a11 */ - AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE1) /* mii2_crs.gpmc_wait0 */ - AM33XX_IOPAD(0x874, PIN_INPUT | MUX_MODE1) /* mii2_rxer.gpmc_wpn */ - AM33XX_IOPAD(0x878, PIN_INPUT | MUX_MODE1) /* mii2_col.gpmc_ben1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* mii2_txen.gpmc_a0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT, MUX_MODE1) /* mii2_rxdv.gpmc_a1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* mii2_txd3.gpmc_a2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* mii2_txd2.gpmc_a3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* mii2_txd1.gpmc_a4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* mii2_txd0.gpmc_a5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT, MUX_MODE1) /* mii2_txclk.gpmc_a6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT, MUX_MODE1) /* mii2_rxclk.gpmc_a7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE1) /* mii2_rxd3.gpmc_a8 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE1) /* mii2_rxd2.gpmc_a9 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE1) /* mii2_rxd1.gpmc_a10 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE1) /* mii2_rxd0.gpmc_a11 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT, MUX_MODE1) /* mii2_crs.gpmc_wait0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT, MUX_MODE1) /* mii2_rxer.gpmc_wpn */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT, MUX_MODE1) /* mii2_col.gpmc_ben1 */ >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; mmc1_pins: pinmux_mmc1_pins { /* eMMC */ pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) >; }; mmc2_pins: pinmux_mmc2_pins { /* SD cardcage */ pinctrl-single,pins = < - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ /* card change signal for frontpanel SD cardcage */ - AM33XX_IOPAD(0x890, PIN_INPUT | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT, MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ >; }; lcd_pins_s0: lcd_pins_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; dcan0_pins: pinmux_dcan0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart1_ctsn.d_can0_tx */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart1_rtsn.d_can0_rx */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 6be79b8349ac..5c3e49f93ac4 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -93,14 +93,14 @@ &am33xx_pinmux { i2c0_pins: pinmux_i2c0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c1_pins: pinmux_i2c1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x90C, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE3) /* mii1_crs,i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE3) /* mii1_rxerr,i2c1_scl */ >; }; }; @@ -130,7 +130,7 @@ &am33xx_pinmux { accel_pins: pinmux_accel { pinctrl-single,pins = < - AM33XX_IOPAD(0x898, PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT, MUX_MODE7) /* gpmc_wen.gpio2_4 */ >; }; }; @@ -177,12 +177,12 @@ &am33xx_pinmux { audio_pins: pinmux_audio { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */ - AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7) /* gpmc_a0.gpio1_16 */ >; }; }; @@ -228,36 +228,36 @@ &am33xx_pinmux { lcd_pins: pinmux_lcd { pinctrl-single,pins = < - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */ - AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */ - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */ - AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */ - AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */ - AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad8.lcd_data16 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data18 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data23 */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) /* Display Enable */ - AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a11.gpio1_27 */ >; }; }; @@ -299,29 +299,29 @@ &am33xx_pinmux { ethernet_pins: pinmux_ethernet { pinctrl-single,pins = < - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE2) /* ethernet interrupt */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE7) /* rmii2_refclk.gpio0_29 */ /* ethernet PHY nReset */ - AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLUP, MUX_MODE7) /* mii1_col.gpio3_0 */ >; }; mdio_pins: pinmux_mdio { pinctrl-single,pins = < - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; }; @@ -364,45 +364,45 @@ &am33xx_pinmux { sd_pins: pinmux_sd_card { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; emmc_pins: pinmux_emmc { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ /* EMMC nReset */ - AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */ >; }; wireless_pins: pinmux_wireless { pinctrl-single,pins = < - AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ - AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ - AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ - AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */ - AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ - AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3) /* gpmc_clk.mmc1_clk */ /* WLAN nReset */ - AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio1_24 */ /* WLAN nPower down */ - AM33XX_IOPAD(0x870, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_wait0.gpio0_30 */ /* 32kHz Clock */ - AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3) /* xdma_event_intr1.clkout2 */ >; }; }; @@ -498,10 +498,10 @@ &am33xx_pinmux { spi0_pins: pinmux_spi0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) >; }; }; @@ -539,16 +539,16 @@ &am33xx_pinmux { uart0_pins: pinmux_uart0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; }; @@ -591,9 +591,9 @@ usb_pins: pinmux_usb { pinctrl-single,pins = < /* USB0 Over-Current (active low) */ - AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7) /* gpmc_a9.gpio1_25 */ /* USB1 Over-Current (active low) */ - AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) /* gpmc_a10.gpio1_26 */ >; }; }; @@ -649,16 +649,16 @@ &am33xx_pinmux { user_leds_pins: pinmux_user_leds { pinctrl-single,pins = < - AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE7) /* gpmc_a4.gpio1_20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* gpmc_a5.gpio1_21 */ >; }; user_buttons_pins: pinmux_user_buttons { pinctrl-single,pins = < - AM33XX_IOPAD(0x858, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - AM33XX_IOPAD(0x85C, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */ - AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a7.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_a8.gpio0_7 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 015adb626b03..23c3039c567e 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -57,22 +57,22 @@ &am33xx_pinmux { ethernet0_pins: pinmux_ethernet0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */ - AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) >; }; mdio_pins: pinmux_mdio { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; }; @@ -104,8 +104,8 @@ &am33xx_pinmux { i2c0_pins: pinmux_i2c0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) >; }; }; @@ -144,20 +144,20 @@ &am33xx_pinmux { nandflash_pins: pinmux_nandflash { pinctrl-single,pins = < - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) >; }; }; @@ -296,10 +296,10 @@ &am33xx_pinmux { spi0_pins: pinmux_spi0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) >; }; }; diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index 62fe5cab9fae..ff4f919d22f6 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -62,74 +62,74 @@ &am33xx_pinmux { i2c2_pins: pinmux-i2c2-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */ >; }; ehrpwm0_pins: pinmux-ehrpwm0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */ >; }; ehrpwm1_pins: pinmux-ehrpwm1-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */ >; }; mmc0_pins: pinmux-mmc0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */ >; }; spi0_pins: pinmux-spi0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */ - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) >; }; spi1_pins: pinmux-spi1-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */ - AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */ - AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */ >; }; usr_leds_pins: pinmux-usr-leds-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ - AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ - AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */ >; }; uart0_pins: pinmux-uart0-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart4_pins: pinmux-uart4-pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ - AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts index 35527fdf56cc..7ed27b5c4756 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -23,70 +23,70 @@ cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ - AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; usb_hub_ctrl: usb_hub_ctrl { pinctrl-single,pins = < - AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLUP | MUX_MODE7) /* rmii1_refclk.gpio0_29 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* rmii1_refclk.gpio0_29 */ >; }; mpu6050_pins: pinmux_mpu6050_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE7) /* uart0_ctsn.gpio1_8 */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ >; }; lps3331ap_pins: pinmux_lps3331ap_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) /* gpmc_a10.gpio1_26 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts index 917d7ccc9109..07c46a59f1d2 100644 --- a/arch/arm/boot/dts/am335x-sbc-t335.dts +++ b/arch/arm/boot/dts/am335x-sbc-t335.dts @@ -70,122 +70,82 @@ lcd_pins_default: lcd_pins_default { pinctrl-single,pins = < /* gpmc_ad8.lcd_data23 */ - AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad9.lcd_data22 */ - AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad10.lcd_data21 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad11.lcd_data20 */ - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad12.lcd_data19 */ - AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad13.lcd_data18 */ - AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad14.lcd_data17 */ - AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) /* gpmc_ad15.lcd_data16 */ - AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) - /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) - /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) - /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) - /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) - /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) - /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) - /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) - /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) - /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) - /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) - /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) - /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) - /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) - /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) - /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) - /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) - /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) - /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) - /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) - /* lcd_ac_bias_en.lcd_ac_bias_en */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) >; }; lcd_pins_sleep: lcd_pins_sleep { pinctrl-single,pins = < /* gpmc_ad8.lcd_data23 */ - AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad9.lcd_data22 */ - AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad10.lcd_data21 */ - AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad11.lcd_data20 */ - AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.lcd_data19 */ - AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.lcd_data18 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.lcd_data17 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.lcd_data16 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) - /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7) - /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7) - /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7) - /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7) - /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7) - /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7) - /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7) - /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7) - /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7) - /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7) - /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7) - /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7) - /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7) - /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7) - /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7) - /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7) - /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) - /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) - /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) - /* lcd_ac_bias_en.lcd_ac_bias_en */ - AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; }; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index bfbe27a80006..5b0368504015 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -382,193 +382,191 @@ clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < /* xdma_event_intr1.clkout2 */ - AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6) + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT, MUX_MODE6) >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE0) >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < - /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) - /* mdio_clk.mdio_clk */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; ehrpwm1_pins: pinmux_ehrpwm1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.gpio1_19 */ >; }; emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2) - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE5) >; }; mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3) - AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3) - AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3) - AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3) - AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3) - AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT, MUX_MODE3) + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT, MUX_MODE3) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0) - AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0) >; }; uart1_pins: pinmux_uart1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) - AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0) - AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) - AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0) >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) - AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) >; }; uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) - AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE6) >; }; user_leds_s0: user_leds_s0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7) - AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7) - AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7) - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7) - AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLUP, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLUP, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7) >; }; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 38d57b89f7d3..1ac0c8aa98c5 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -218,227 +218,227 @@ audio_pins: pinmux_audio_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) >; }; audio_pa_pins: pinmux_audio_pa_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */ >; }; audio_mclk_pins: pinmux_audio_mclk_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.gpio1_27 */ >; }; backlight0_pins: pinmux_backlight0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7) /* gpmc_wen.gpio2_4 */ >; }; backlight1_pins: pinmux_backlight1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* gpmc_ad10.gpio0_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad10.gpio0_26 */ >; }; lcd_pins: pinmux_lcd_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ - AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ - AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ - AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ - AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ - AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ - AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ - AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ - AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ - AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ - AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ - AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ - AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ - AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ - AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ - AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ - AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ - AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ - AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ - AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; led_pins: pinmux_led_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* gpmc_a6.gpio1_22 */ - AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* gpmc_a7.gpio1_23 */ - AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* gpmc_a8.gpio1_24 */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ - AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) /* gpmc_wait0.uart4_rxd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* gpmc_wpn.uart4_txd */ >; }; i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ - AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* uart1_rtsn.i2c2_scl */ >; }; cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ - AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ - AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ - AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ - AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ - AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ - AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ - AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ - AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ - AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ - AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0) >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ - AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ - AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) /* Ethernet */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* Ethernet_nRST - gpmc_ad14.gpio1_14 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7) /* Ethernet_nRST - gpmc_ad14.gpio1_14 */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < /* MDIO reset value */ - AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) - AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ >; }; emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a4.gpio1_20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_a4.gpio1_20 */ >; }; emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ - AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ - AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ - AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ - AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ - AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ - AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ - AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ - AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ >; }; ehrpwm1_pins: pinmux_ehrpwm1a_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.ehrpwm1b */ >; }; rtc0_irq_pins: pinmux_rtc0_irq_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad9.gpio0_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_ad9.gpio0_23 */ >; }; spi0_pins: pinmux_spi0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MOSI - spi0_d0.spi0_d0 */ - AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MISO - spi0_d1.spi0_d1 */ - AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CLK - spi0_clk.spi0_clk */ - AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS0 (NBATTSS) - spi0_cs0.spi0_cs0 */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) - spi0_cs1.spi0_cs1 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MOSI */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_MISO */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_CS0 (NBATTSS) */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0) /* SPI0_CS1 (FPGA_FLASH_NCS) */ >; }; lwb_pins: pinmux_lwb_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */ - AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */ /* PDI Bus - Battery system */ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */ - AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */ /* FPGA */ - AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */ - AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 8ce541739b24..b7d28a20341f 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -32,11 +32,11 @@ &am33xx_pinmux { mcasp0_pins: pinmux_mcasp0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; }; @@ -84,8 +84,8 @@ &am33xx_pinmux { dcan1_pins: pinmux_dcan1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ - AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ >; }; }; @@ -100,20 +100,20 @@ &am33xx_pinmux { ethernet1_pins: pinmux_ethernet1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */ - AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */ - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */ - AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */ - AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */ - AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */ - AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */ - AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ - AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ - AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ - AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ - AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ - AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */ >; }; }; @@ -141,13 +141,13 @@ &am33xx_pinmux { mmc1_pins: pinmux_mmc1 { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ >; }; }; @@ -171,17 +171,17 @@ &am33xx_pinmux { uart0_pins: pinmux_uart0 { pinctrl-single,pins = < - AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ - AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ - AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ - AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 9dfd80e3b76e..9b8b132b04e1 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -80,6 +80,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&matrix_keypad_default>; pinctrl-1 = <&matrix_keypad_sleep>; + wakeup-source; row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ @@ -620,6 +621,12 @@ regulator-name = "vdcdc3"; regulator-boot-on; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + regulator-state-disk { + regulator-off-in-suspend; + }; }; dcdc4: regulator-dcdc4 { @@ -634,12 +641,16 @@ regulator-name = "v1_0bat"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; }; dcdc6: regulator-dcdc6 { regulator-name = "v1_8bat"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; ldo1: regulator-ldo1 { diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi new file mode 100644 index 000000000000..d51007c3e8c4 --- /dev/null +++ b/arch/arm/boot/dts/am5718.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "dra72x.dtsi" + +/ { + compatible = "ti,am5718", "ti,dra7"; +}; + +/* + * These modules are not present on AM5718 + * + * ATL + * VCP1, VCP2 + * MLB + * ISS + * USB3, USB4 + */ + +&usb3_tm { + status = "disabled"; +}; + +&usb4_tm { + status = "disabled"; +}; + +&atl_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 6432309b39e3..66116ad3f9f4 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -#include "dra72x.dtsi" +#include "am5718.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "dra7-mmc-iodelay.dtsi" diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi new file mode 100644 index 000000000000..82e5427ef6a9 --- /dev/null +++ b/arch/arm/boot/dts/am5728.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "dra74x.dtsi" + +/ { + compatible = "ti,am5728", "ti,dra7"; +}; + +/* + * These modules are not present on AM5728 + * + * EVE1, EVE2 + * ATL + * VCP1, VCP2 + * MLB + * ISS + * USB3, USB4 + */ + +&usb3_tm { + status = "disabled"; +}; + +&usb4_tm { + status = "disabled"; +}; + +&atl_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index b2fb6e097be7..4f835222c266 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -8,15 +8,14 @@ /dts-v1/; -#include "dra74x.dtsi" +#include "am5728.dtsi" #include "dra7-mmc-iodelay.dtsi" #include "dra74x-mmc-iodelay.dtsi" #include "am572x-idk-common.dtsi" / { model = "TI AM5728 IDK"; - compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", - "ti,dra7"; + compatible = "ti,am5728-idk", "ti,am5728", "ti,dra7"; }; &mmc1 { diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi new file mode 100644 index 000000000000..5e129759d04a --- /dev/null +++ b/arch/arm/boot/dts/am5748.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "dra76x.dtsi" + +/ { + compatible = "ti,am5748", "ti,dra762", "ti,dra7"; +}; + +/* + * These modules are not present on AM5748 + * + * EVE1, EVE2 + * ATL + * VCP1, VCP2 + * MLB + * ISS + * USB3, USB4 + */ + +&usb3_tm { + status = "disabled"; +}; + +&usb4_tm { + status = "disabled"; +}; + +&atl_tm { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 378dfa780ac1..dc5141c35610 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -6,14 +6,14 @@ /dts-v1/; -#include "dra76x.dtsi" +#include "am5748.dtsi" #include "dra7-mmc-iodelay.dtsi" #include "dra76x-mmc-iodelay.dtsi" #include "am572x-idk-common.dtsi" / { model = "TI AM5748 IDK"; - compatible = "ti,am5728-idk", "ti,dra762", "ti,dra7"; + compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7"; }; &qspi { diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 1e6620f139dd..2341a56ebab9 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -7,7 +7,7 @@ */ /dts-v1/; -#include "dra74x.dtsi" +#include "am5728.dtsi" #include "am57xx-commercial-grade.dtsi" #include "dra74x-mmc-iodelay.dtsi" #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 4748ce8747ad..0460de0da2bf 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -13,7 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include "dra74x.dtsi" +#include "am5728.dtsi" / { model = "CompuLab CL-SOM-AM57x"; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 96c18703e471..3f4bb44d85f0 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -415,6 +415,8 @@ reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; clocks = <&coreclk 2>, <&refclk>; clock-names = "nbclk", "fixed"; + interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; }; cpurst: cpurst@20800 { diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 2375449c02d0..556ed469830c 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -13,12 +13,25 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlyprintk"; + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; }; memory@80000000 { reg = <0x80000000 0x20000000>; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; }; &fmc { @@ -27,6 +40,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; +#include "openbmc-flash-layout.dtsi" }; }; @@ -97,3 +111,8 @@ &uhci { status = "okay"; }; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts index 9f194b5eeba4..43aba4071a5c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -56,6 +56,12 @@ memory@80000000 { reg = <0x80000000 0x20000000>; }; + + ast-adc-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; }; &pinctrl { diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index 4c2dcac738e8..c4521eda787c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -64,6 +64,11 @@ status = "okay"; }; +&vuart { + // VUART Host Console + status = "okay"; +}; + &uart1 { // Host Console status = "okay"; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index b854ac0bae9a..b249da80fb83 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -32,9 +32,9 @@ no-map; }; - flash_memory: region@98000000 { + flash_memory: region@5c000000 { no-map; - reg = <0x98000000 0x01000000>; /* 16MB */ + reg = <0x5C000000 0x02000000>; /* 32MB */ }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 76fe994f2ba4..418a1988b262 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -35,6 +35,13 @@ reg = <0x9ef00000 0x00100000>; no-map; }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; leds { @@ -238,6 +245,7 @@ &gfx { status = "okay"; + memory-region = <&gfx_memory>; }; &pinctrl { diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index ad54117c075e..f1356ca794d8 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -26,6 +26,13 @@ no-map; reg = <0x98000000 0x04000000>; /* 64M */ }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; gpio-keys { @@ -186,13 +193,49 @@ status = "okay"; label = "bmc"; m25p,fast-read; -#include "openbmc-flash-layout.dtsi" + + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "obmc-ubi"; + }; + }; }; flash@1 { status = "okay"; - label = "alt"; + label = "alt-bmc"; m25p,fast-read; + + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x1F80000 >; + label = "alt-obmc-ubi"; + }; + }; + }; }; @@ -565,6 +608,7 @@ &gfx { status = "okay"; + memory-region = <&gfx_memory>; }; &pinctrl { @@ -592,3 +636,7 @@ &adc { status = "okay"; }; + +&vhub { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 9549f867aa1e..5d7050d00874 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -209,6 +209,12 @@ clock-names = "PCLK"; }; + rtc: rtc@1e781000 { + compatible = "aspeed,ast2400-rtc"; + reg = <0x1e781000 0x18>; + status = "disabled"; + }; + uart1: serial@1e783000 { compatible = "ns16550a"; reg = <0x1e783000 0x20>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 85ed9dbec196..4345c3153ca7 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -232,6 +232,10 @@ compatible = "aspeed,ast2500-gfx", "syscon"; reg = <0x1e6e6000 0x1000>; reg-io-width = <4>; + clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; + resets = <&syscon ASPEED_RESET_CRT1>; + status = "disabled"; + interrupts = <0x19>; }; adc: adc@1e6e9000 { @@ -243,6 +247,16 @@ status = "disabled"; }; + video: video@1e700000 { + compatible = "aspeed,ast2500-video-engine"; + reg = <0x1e700000 0x1000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, + <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + interrupts = <7>; + status = "disabled"; + }; + sram: sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x9000>; // 36K @@ -260,6 +274,12 @@ #interrupt-cells = <2>; }; + rtc: rtc@1e781000 { + compatible = "aspeed,ast2500-rtc"; + reg = <0x1e781000 0x18>; + status = "disabled"; + }; + timer: timer@1e782000 { /* This timer is a Faraday FTTMR010 derivative */ compatible = "aspeed,ast2400-timer"; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 33a159c0163f..7788d5db65c2 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board * * Copyright (c) 2017, Microchip Technology Inc. * 2017 Cristian Birsan <cristian.birsan@microchip.com> * 2017 Claudiu Beznea <claudiu.beznea@microchip.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index a48180555ef5..89f0c9979b89 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board * @@ -5,44 +6,6 @@ * 2016 Nicolas Ferre <nicolas.ferre@atmel.com> * 2017 Cristian Birsan <cristian.birsan@microchip.com> * 2017 Claudiu Beznea <claudiu.beznea@microchip.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "at91-sama5d27_som1.dtsi" diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index fa54e8866f1e..808e399fd39a 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -1,52 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board * * Copyright (C) 2015 Atmel, * 2015 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/active-semi,8945a-regulator.h> / { model = "Atmel SAMA5D2 Xplained"; @@ -181,49 +145,102 @@ regulator-name = "VDD_1V35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt=<1400000>; + regulator-suspend-max-microvolt=<1400000>; + regulator-changeable-in-suspend; + regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>; + }; }; vdd_1v2_reg: REG_DCDC2 { regulator-name = "VDD_1V2"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_reg: REG_DCDC3 { regulator-name = "VDD_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_fuse_reg: REG_LDO1 { regulator-name = "VDD_FUSE"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_3v3_lp_reg: REG_LDO2 { regulator-name = "VDD_3V3_LP"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_led_reg: REG_LDO3 { regulator-name = "VDD_LED"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; vdd_sdhc_1v8_reg: REG_LDO4 { regulator-name = "VDD_SDHC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, + <ACT8945A_REGULATOR_MODE_LOWPOWER>; + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 43aef56ac74a..fdfc37d716e0 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board * * Copyright (C) 2015 Atmel, * 2015 Josh Wu <josh.wu@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "sama5d4.dtsi" diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 12d5af938aa3..0cc1cff13e46 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit * * Copyright (C) 2014 Atmel, * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "sama5d4.dtsi" diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index 430277291e02..15050fdd479d 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for VInCo platform * * Copyright (C) 2014 Atmel, * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> * 2015 Gregory CLEMENT <gregory.clement@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "sama5d4.dtsi" diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index 07d1b571e601..81f808a10931 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Atmel at91sam9260 Evaluation Kit * * Copyright (C) 2016 Atmel, * 2016 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "at91sam9260.dtsi" diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi index 1304452f0fae..3f9d8caf8b0a 100644 --- a/arch/arm/boot/dts/at91sam9xe.dtsi +++ b/arch/arm/boot/dts/at91sam9xe.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC * * Copyright (C) 2015 Atmel, * 2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "at91sam9260.dtsi" diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi index bd83962d3627..1dfeeceabf4c 100644 --- a/arch/arm/boot/dts/axp81x.dtsi +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -171,4 +171,8 @@ status = "disabled"; }; }; + + usb_power_supply: usb-power-supply { + compatible = "x-powers,axp813-usb-power-supply"; + }; }; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 414f1cd68733..fe9f0bc29fec 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -2499,7 +2499,7 @@ ranges = <0x0 0x3a000 0x1000>; }; - target-module@3c000 { /* 0x4843c000, ap 23 08.0 */ + atl_tm: target-module@3c000 { /* 0x4843c000, ap 23 08.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x3c000 0x4>; reg-names = "rev"; @@ -4099,7 +4099,7 @@ }; }; - target-module@100000 { /* 0x48900000, ap 85 04.0 */ + usb3_tm: target-module@100000 { /* 0x48900000, ap 85 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "usb_otg_ss3"; reg = <0x100000 0x4>, @@ -4148,7 +4148,7 @@ }; }; - target-module@140000 { /* 0x48940000, ap 75 3c.0 */ + usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "usb_otg_ss4"; reg = <0x140000 0x4>, diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 2bc9add8b7a5..d87e932f45bd 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -193,6 +193,7 @@ ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; + ti,syscon-lane-sel = <&scm_conf_pcie 0x18>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie1_intc 1>, <0 0 0 2 &pcie1_intc 2>, @@ -218,6 +219,7 @@ phys = <&pcie1_phy>; phy-names = "pcie-phy0"; ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; + ti,syscon-lane-sel = <&scm_conf_pcie 0x18>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 1bb8e5c9d029..abfff54d6de5 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -25,7 +25,7 @@ }; chosen { - bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial1:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 5892a9f7622f..8ce3a7786b19 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -97,42 +97,46 @@ }; }; - soc: soc { - compatible = "simple-bus"; + fixed-rate-clocks { #address-cells = <1>; - #size-cells = <1>; - ranges; - - fixed-rate-clocks { - #address-cells = <1>; - #size-cells = <0>; + #size-cells = <0>; - xusbxti: clock@0 { - compatible = "fixed-clock"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xusbxti"; - }; + xusbxti: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xusbxti"; + }; - xxti: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xxti"; - }; + xxti: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xxti"; + }; - xtcxo: clock@2 { - compatible = "fixed-clock"; - reg = <2>; - clock-frequency = <0>; - #clock-cells = <0>; - clock-output-names = "xtcxo"; - }; + xtcxo: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xtcxo"; }; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; sysram@2020000 { compatible = "mmio-sram"; @@ -673,12 +677,6 @@ status = "disabled"; }; - pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - }; - ppmu_dmc0: ppmu_dmc0@106a0000 { compatible = "samsung,exynos-ppmu"; reg = <0x106a0000 0x2000>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 6085e92ac2d7..36ccf227434d 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -51,6 +51,12 @@ serial3 = &serial_3; }; + pmu: pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&combiner>; + interrupts = <2 2>, <3 2>; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -169,12 +175,6 @@ reg = <0x10440000 0x1000>; }; - pmu: pmu { - compatible = "arm,cortex-a9-pmu"; - interrupt-parent = <&combiner>; - interrupts = <2 2>, <3 2>; - }; - sys_reg: syscon@10010000 { compatible = "samsung,exynos4-sysreg", "syscon"; reg = <0x10010000 0x400>; @@ -675,7 +675,7 @@ status = "disabled"; }; - amba { + amba: amba { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index dd9ec05eb0f7..36b1edea254a 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -30,8 +30,8 @@ }; chosen { - bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; - stdout-path = &serial_2; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; + stdout-path = "serial2:115200n8"; }; mmc_reg: voltage-regulator { diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 7a3e621edede..77fc11e593ad 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -26,8 +26,8 @@ }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; - stdout-path = &serial_1; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; + stdout-path = "serial1:115200n8"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 8dbc47d627a5..6882480dbaf7 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -26,8 +26,8 @@ }; chosen { - bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; - stdout-path = &serial_2; + bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + stdout-path = "serial2:115200n8"; }; regulators { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 5c3d98654f13..bf092e97e14f 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -24,8 +24,8 @@ }; chosen { - bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; - stdout-path = &serial_2; + bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; + stdout-path = "serial2:115200n8"; }; @@ -177,6 +177,20 @@ }; }; +&amba { + mdma0: mdma@12840000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12840000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + power-domains = <&pd_lcd0>; + }; +}; + &camera { status = "okay"; @@ -491,7 +505,8 @@ }; &mdma1 { - reg = <0x12840000 0x1000>; + /* Use the secure mdma0 */ + status = "disabled"; }; &mixer { diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 2bdf899df436..96d99887bceb 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -34,8 +34,6 @@ fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 10000 0>; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; cooling-levels = <0 102 170 230>; }; @@ -66,6 +64,11 @@ }; }; +&adc { + vdd-supply = <&ldo10_reg>; + /* Nothing connected to ADC inputs, keep it disabled */ +}; + /* Supply for LAN9730/SMSC95xx */ &buck8_reg { regulator-name = "BUCK8_P3V3"; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 346f71932457..698de4345d16 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -25,8 +25,7 @@ }; chosen { - bootargs ="console=ttySAC2,115200"; - stdout-path = &serial_2; + stdout-path = "serial2:115200n8"; }; firmware@203f000 { diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index 5c5c2887c14f..e70fb6e601f0 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -23,8 +23,8 @@ }; chosen { - bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; - stdout-path = &serial_1; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; + stdout-path = "serial1:115200n8"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 327ee980d3a5..aac533933c61 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -22,6 +22,7 @@ }; chosen { - bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + stdout-path = "serial2:115200n8"; }; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 26ad6ab3c6af..e5c041ec0756 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -274,7 +274,7 @@ }; adc: adc@126c0000 { - compatible = "samsung,exynos-adc-v1"; + compatible = "samsung,exynos4212-adc"; reg = <0x126C0000 0x100>; interrupt-parent = <&combiner>; interrupts = <10 3>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index d5e66189ed2a..6dc96948a9cc 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -24,7 +24,8 @@ }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; + stdout-path = "serial2:115200n8"; }; vdd: fixed-regulator-vdd { diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 80986b97dfe5..d5e0392b409e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -157,6 +157,12 @@ }; }; + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupt-parent = <&combiner>; + interrupts = <1 2>, <22 4>; + }; + soc: soc { sysram@2020000 { compatible = "mmio-sram"; @@ -227,20 +233,6 @@ power-domains = <&pd_mau>; }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - /* - * Unfortunately we need this since some versions - * of U-Boot on Exynos don't set the CNTFRQ register, - * so we need the value from DT. - */ - clock-frequency = <24000000>; - }; - mct@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; @@ -265,12 +257,6 @@ }; }; - pmu { - compatible = "arm,cortex-a15-pmu"; - interrupt-parent = <&combiner>; - interrupts = <1 2>, <22 4>; - }; - pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x11400000 0x1000>; @@ -1097,6 +1083,20 @@ }; }; }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + /* + * Unfortunately we need this since some versions + * of U-Boot on Exynos don't set the CNTFRQ register, + * so we need the value from DT. + */ + clock-frequency = <24000000>; + }; }; &dp { diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi index b1edb20b789e..17e2f3e0d71e 100644 --- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi @@ -153,6 +153,14 @@ #gpio-cells = <2>; interrupt-controller; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; @@ -161,6 +169,14 @@ #gpio-cells = <2>; interrupt-controller; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index fa19c59b2fb6..36a2b77eeb9d 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "console=ttySAC2,115200"; + stdout-path = "serial2:115200n8"; }; fin_pll: xxti { diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 55167850619c..3581b57fbbf7 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -17,6 +17,10 @@ #size-cells = <1>; aliases { + i2c0 = &hsi2c_0; + i2c1 = &hsi2c_1; + i2c2 = &hsi2c_2; + i2c3 = &hsi2c_3; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; @@ -223,7 +227,7 @@ wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -288,6 +292,14 @@ #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; clock-names = "biu", "ciu"; + assigned-clocks = + <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>, + <&clock_top TOP_SCLK_MMC0>; + assigned-clock-parents = + <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>; + assigned-clock-rates = <0>, <0>, <800000000>; fifo-depth = <64>; status = "disabled"; }; @@ -300,6 +312,14 @@ #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; clock-names = "biu", "ciu"; + assigned-clocks = + <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>, + <&clock_top TOP_SCLK_MMC1>; + assigned-clock-parents = + <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>; + assigned-clock-rates = <0>, <0>, <800000000>; fifo-depth = <64>; status = "disabled"; }; @@ -312,9 +332,69 @@ #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; clock-names = "biu", "ciu"; + assigned-clocks = + <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>, + <&clock_top TOP_SCLK_MMC2>; + assigned-clock-parents = + <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, + <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>; + assigned-clock-rates = <0>, <0>, <800000000>; fifo-depth = <64>; status = "disabled"; }; + + hsi2c_0: hsi2c@12da0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DA0000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC0>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_1: hsi2c@12db0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DB0000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC1>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_2: hsi2c@12dc0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DC0000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC2>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_3: hsi2c@12dd0000 { + compatible = "samsung,exynos5260-hsi2c"; + reg = <0x12DD0000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_hs_bus>; + clocks = <&clock_peri PERI_CLK_HSIC3>; + clock-names = "hsi2c"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 434a7591ff63..8f9e08f940ab 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -38,8 +38,6 @@ fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 20972 0>; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; cooling-levels = <0 130 170 230>; }; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 8fc8c841d34b..dffa5e3ed90c 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "console=ttySAC2,115200"; + stdout-path = "serial2:115200n8"; }; fin_pll: xxti { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 3447160e1fbf..dbf0306896f6 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -24,7 +24,7 @@ }; chosen { - bootargs = "console=ttySAC3,115200"; + stdout-path = "serial3:115200n8"; }; firmware@2073000 { @@ -51,6 +51,15 @@ }; }; +&adc { + vdd-supply = <&ldo4_reg>; + status = "okay"; +}; + +&cci { + status = "disabled"; +}; + &cpu0 { cpu-supply = <&buck2_reg>; }; @@ -59,12 +68,268 @@ cpu-supply = <&buck6_reg>; }; -&usbdrd_dwc3_1 { - dr_mode = "host"; +&cpu0_thermal { + trips { + cpu0_alert0: cpu-alert-0 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "passive"; + }; + cpu0_alert1: cpu-alert-1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu0_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu0_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* + * Reduce the CPU speed by 2 steps, down to: 1600 MHz + * and 1100 MHz. + */ + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + + /* + * Reduce the CPU speed down to 1200 MHz big (6 steps) + * and 800 MHz LITTLE (5 steps). + */ + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&cpu0 3 6>, + <&cpu1 3 6>, + <&cpu2 3 6>, + <&cpu3 3 6>, + <&cpu4 3 5>, + <&cpu5 3 5>, + <&cpu6 3 5>, + <&cpu7 3 5>; + }; + + /* + * Reduce the CPU speed as much as possible, down to 700 MHz + * big (11 steps) and 600 MHz LITTLE (7 steps). + */ + map2 { + trip = <&cpu0_alert2>; + cooling-device = <&cpu0 6 11>, + <&cpu1 6 11>, + <&cpu2 6 11>, + <&cpu3 6 11>, + <&cpu4 5 7>, + <&cpu5 5 7>, + <&cpu6 5 7>, + <&cpu7 5 7>; + }; + }; }; -&cci { - status = "disabled"; +&cpu1_thermal { + trips { + cpu1_alert0: cpu-alert-0 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "passive"; + }; + cpu1_alert1: cpu-alert-1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu1_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu1_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&cpu0 3 6>, + <&cpu1 3 6>, + <&cpu2 3 6>, + <&cpu3 3 6>, + <&cpu4 3 5>, + <&cpu5 3 5>, + <&cpu6 3 5>, + <&cpu7 3 5>; + }; + + map2 { + trip = <&cpu1_alert2>; + cooling-device = <&cpu0 6 11>, + <&cpu1 6 11>, + <&cpu2 6 11>, + <&cpu3 6 11>, + <&cpu4 5 7>, + <&cpu5 5 7>, + <&cpu6 5 7>, + <&cpu7 5 7>; + }; + }; +}; + +&cpu2_thermal { + trips { + cpu2_alert0: cpu-alert-0 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "passive"; + }; + cpu2_alert1: cpu-alert-1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu2_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu2_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&cpu0 3 6>, + <&cpu1 3 6>, + <&cpu2 3 6>, + <&cpu3 3 6>, + <&cpu4 3 5>, + <&cpu5 3 5>, + <&cpu6 3 5>, + <&cpu7 3 5>; + }; + + map2 { + trip = <&cpu2_alert2>; + cooling-device = <&cpu0 6 11>, + <&cpu1 6 11>, + <&cpu2 6 11>, + <&cpu3 6 11>, + <&cpu4 6 7>, + <&cpu5 6 7>, + <&cpu6 6 7>, + <&cpu7 6 7>; + }; + }; +}; + +&cpu3_thermal { + trips { + cpu3_alert0: cpu-alert-0 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "passive"; + }; + cpu3_alert1: cpu-alert-1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu3_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu3_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&cpu0 3 6>, + <&cpu1 3 6>, + <&cpu2 3 6>, + <&cpu3 3 6>, + <&cpu4 3 5>, + <&cpu5 3 5>, + <&cpu6 3 5>, + <&cpu7 3 5>; + }; + + map2 { + trip = <&cpu3_alert2>; + cooling-device = <&cpu0 6 11>, + <&cpu1 6 11>, + <&cpu2 6 11>, + <&cpu3 6 11>, + <&cpu4 5 7>, + <&cpu5 5 7>, + <&cpu6 5 7>, + <&cpu7 5 7>; + }; + }; }; &hdmi { @@ -107,12 +372,19 @@ regulator-name = "PVDD_APIO_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; ldo3_reg: LDO3 { regulator-name = "PVDD_APIO_MMCON_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + /* + * Must be always on, even though there is + * a consumer (mmc_0). Otherwise the board + * does not reboot with vendor U-Boot + * (Linaro for Arndale Octa, v2012.07). + */ regulator-always-on; }; @@ -145,6 +417,7 @@ regulator-name = "PVDD_ABB_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; ldo9_reg: LDO9 { @@ -176,10 +449,17 @@ ldo13_reg: LDO13 { regulator-name = "PVDD_APIO_MMCOFF_2V8"; - regulator-min-microvolt = <2800000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; }; + ldo14_reg: LDO14 { + /* Unused */ + regulator-name = "PVDD_LDO14"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo15_reg: LDO15 { regulator-name = "PVDD_PERI_2V8"; regulator-min-microvolt = <3300000>; @@ -192,6 +472,13 @@ regulator-max-microvolt = <2200000>; }; + ldo17_reg: LDO17 { + /* Unused */ + regulator-name = "PVDD_LDO17"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo18_reg: LDO18 { regulator-name = "PVDD_EMMC_1V8"; regulator-min-microvolt = <1800000>; @@ -216,10 +503,17 @@ regulator-max-microvolt = <1800000>; }; + ldo22_reg: LDO22 { + /* Unused */ + regulator-name = "PVDD_LDO22"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2375000>; + }; + ldo23_reg: LDO23 { regulator-name = "PVDD_MIFS_1V1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; regulator-always-on; }; @@ -229,6 +523,13 @@ regulator-max-microvolt = <2800000>; }; + ldo25_reg: LDO25 { + /* Unused */ + regulator-name = "PVDD_LDO25"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo26_reg: LDO26 { regulator-name = "PVDD_CAM0_AF_2V8"; regulator-min-microvolt = <3000000>; @@ -237,8 +538,8 @@ ldo27_reg: LDO27 { regulator-name = "PVDD_G3DS_1V0"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; }; ldo28_reg: LDO28 { @@ -253,6 +554,13 @@ regulator-max-microvolt = <1800000>; }; + ldo30_reg: LDO30 { + /* Unused */ + regulator-name = "PVDD_LDO30"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo31_reg: LDO31 { regulator-name = "PVDD_PERI_1V8"; regulator-min-microvolt = <1800000>; @@ -271,12 +579,33 @@ regulator-max-microvolt = <1800000>; }; + ldo34_reg: LDO34 { + /* Unused */ + regulator-name = "PVDD_LDO34"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo35_reg: LDO35 { regulator-name = "PVDD_CAM0_DVDD_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; + ldo36_reg: LDO36 { + /* Unused */ + regulator-name = "PVDD_LDO36"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo37_reg: LDO37 { + /* Unused */ + regulator-name = "PVDD_LDO37"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo38_reg: LDO38 { regulator-name = "PVDD_CAM0_AVDD_2V8"; regulator-min-microvolt = <2800000>; @@ -364,7 +693,7 @@ &mmc_0 { status = "okay"; - broken-cd; + non-removable; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; @@ -372,22 +701,27 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; vmmc-supply = <&ldo10_reg>; + vqmmc-supply = <&ldo3_reg>; bus-width = <8>; cap-mmc-highspeed; + mmc-hs200-1_8v; }; &mmc_2 { status = "okay"; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; vmmc-supply = <&ldo19_reg>; vqmmc-supply = <&ldo13_reg>; bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; }; &pinctrl_0 { @@ -404,3 +738,7 @@ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; clock-names = "rtc", "rtc_src"; }; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 3cf905047893..8240e5186972 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -21,7 +21,8 @@ }; chosen { - bootargs = "console=ttySAC2,115200 init=/linuxrc"; + bootargs = "init=/linuxrc"; + stdout-path = "serial2:115200n8"; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index aaff15880761..5fb2326875dc 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -5,7 +5,7 @@ * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file. + * SAMSUNG EXYNOS5420 SoC device nodes are listed in this file. * EXYNOS5420 based board files can include this file and provide * values for board specfic bindings. */ diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi index 51a843bd65ed..c3c2d85267da 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -22,11 +22,12 @@ "Headphone Jack", "HPL", "Headphone Jack", "HPR", "Headphone Jack", "MICBIAS", - "IN1", "Headphone Jack", + "IN12", "Headphone Jack", "Speakers", "SPKL", "Speakers", "SPKR", "I2S Playback", "Mixer DAI TX", - "HiFi Playback", "Mixer DAI TX"; + "HiFi Playback", "Mixer DAI TX", + "Mixer DAI RX", "HiFi Capture"; assigned-clocks = <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 5f195ad7e467..93a48f2dda49 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -44,8 +44,6 @@ fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 20972 0>; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; cooling-levels = <0 130 170 230>; }; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index de26e5ee0d2d..ae866bcc30c4 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -25,27 +25,27 @@ usbdrdphy1 = &usbdrd_phy1; }; - soc: soc { - arm_a7_pmu: arm-a7-pmu { - compatible = "arm,cortex-a7-pmu"; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; + arm_a7_pmu: arm-a7-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; - arm_a15_pmu: arm-a15-pmu { - compatible = "arm,cortex-a15-pmu"; - interrupt-parent = <&combiner>; - interrupts = <1 2>, - <7 0>, - <16 6>, - <19 2>; - status = "disabled"; - }; + arm_a15_pmu: arm-a15-pmu { + compatible = "arm,cortex-a15-pmu"; + interrupt-parent = <&combiner>; + interrupts = <1 2>, + <7 0>, + <16 6>, + <19 2>; + status = "disabled"; + }; + soc: soc { sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index 592111c8d6fd..cfbfbc91a1e1 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -267,44 +267,50 @@ /* 32MB of flash */ reg = <0x30000000 0x02000000>; - /* - * This "RedBoot" is the Storlink derivative. - */ - partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x00040000>; - read-only; - }; - /* - * This firmware image contains the kernel catenated - * with the squashfs root filesystem. For some reason - * this is called "upgrade" on the vendor system. - */ - partition@40000 { - label = "upgrade"; - reg = <0x00040000 0x01f40000>; - read-only; - }; - /* RGDB, Residental Gateway Database? */ - partition@1f80000 { - label = "rgdb"; - reg = <0x01f80000 0x00040000>; - read-only; - }; - /* - * This partition contains MAC addresses for WAN, - * WLAN and LAN, and the country code (for wireless - * I guess). - */ - partition@1fc0000 { - label = "nvram"; - reg = <0x01fc0000 0x00020000>; - read-only; - }; - partition@1fe0000 { - label = "LangPack"; - reg = <0x01fe0000 0x00020000>; - read-only; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * This "RedBoot" is the Storlink derivative. + */ + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + /* + * This firmware image contains the kernel catenated + * with the squashfs root filesystem. For some reason + * this is called "upgrade" on the vendor system. + */ + partition@40000 { + label = "upgrade"; + reg = <0x00040000 0x01f40000>; + read-only; + }; + /* RGDB, Residental Gateway Database? */ + partition@1f80000 { + label = "rgdb"; + reg = <0x01f80000 0x00040000>; + read-only; + }; + /* + * This partition contains MAC addresses for WAN, + * WLAN and LAN, and the country code (for wireless + * I guess). + */ + partition@1fc0000 { + label = "nvram"; + reg = <0x01fc0000 0x00020000>; + read-only; + }; + partition@1fe0000 { + label = "LangPack"; + reg = <0x01fe0000 0x00020000>; + read-only; + }; }; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 59cadeee23ed..9cbdc1a15cda 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -21,6 +21,12 @@ gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &esdhc1; + mmc1 = &esdhc2; + mmc2 = &esdhc3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts new file mode 100644 index 000000000000..a0eaf869b913 --- /dev/null +++ b/arch/arm/boot/dts/imx50-kobo-aura.dts @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2019 Jonathan Neuschäfer +// +// The Kobo Aura e-book reader, model N514. The mainboard is marked as E606F0B. + +/dts-v1/; +#include "imx50.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Kobo Aura (N514)"; + compatible = "kobo,aura", "fsl,imx50"; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + memory@70000000 { + device_type = "memory"; + reg = <0x70000000 0x10000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + on { + label = "kobo_aura:orange:on"; + gpios = <&gpio6 24 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + power { + label = "Power Button"; + gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + + hallsensor { + label = "Hallsensor"; + gpios = <&gpio5 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESERVED>; + linux,input-type = <EV_SW>; + }; + + frontlight { + label = "Frontlight"; + gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_DISPLAYTOGGLE>; + }; + }; + + sd2_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2_reset>; + reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + }; + + sd2_vmmc: gpio-regulator { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2_vmmc>; + regulator-name = "vmmc"; + states = <3300000 0>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-gpio = <&gpio4 12 GPIO_ACTIVE_LOW>; + startup-delay-us = <100000>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1>; + max-frequency = <50000000>; + bus-width = <4>; + cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; + disable-wp; + status = "okay"; + + /* External µSD card */ +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2>; + bus-width = <4>; + max-frequency = <50000000>; + disable-wp; + mmc-pwrseq = <&sd2_pwrseq>; + vmmc-supply = <&sd2_vmmc>; + status = "okay"; + + /* CyberTan WC121 SDIO WiFi (BCM43362) */ +}; + +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd3>; + bus-width = <8>; + non-removable; + max-frequency = <50000000>; + disable-wp; + status = "okay"; + + /* Internal eMMC */ +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + /* TODO: ektf2132 touch controller at 0x15 */ +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + /* TODO: TPS65185 PMIC for E Ink at 0x68 */ +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + /* TODO: embedded controller at 0x43 */ +}; + +&iomuxc { + pinctrl_gpiokeys: gpiokeys { + fsl,pins = < + MX50_PAD_CSPI_MISO__GPIO4_10 0x0 + MX50_PAD_SD2_D7__GPIO5_15 0x0 + MX50_PAD_KEY_ROW0__GPIO4_1 0x0 + >; + }; + + pinctrl_i2c1: i2c1 { + fsl,pins = < + MX50_PAD_I2C1_SCL__I2C1_SCL 0x400001fd + MX50_PAD_I2C1_SDA__I2C1_SDA 0x400001fd + >; + }; + + pinctrl_i2c2: i2c2 { + fsl,pins = < + MX50_PAD_I2C2_SCL__I2C2_SCL 0x400001fd + MX50_PAD_I2C2_SDA__I2C2_SDA 0x400001fd + >; + }; + + pinctrl_i2c3: i2c3 { + fsl,pins = < + MX50_PAD_I2C3_SCL__I2C3_SCL 0x400001fd + MX50_PAD_I2C3_SDA__I2C3_SDA 0x400001fd + >; + }; + + pinctrl_leds: leds { + fsl,pins = < + MX50_PAD_PWM1__GPIO6_24 0x0 + >; + }; + + pinctrl_sd1: sd1 { + fsl,pins = < + MX50_PAD_SD1_CMD__ESDHC1_CMD 0x1e4 + MX50_PAD_SD1_CLK__ESDHC1_CLK 0xd4 + MX50_PAD_SD1_D0__ESDHC1_DAT0 0x1d4 + MX50_PAD_SD1_D1__ESDHC1_DAT1 0x1d4 + MX50_PAD_SD1_D2__ESDHC1_DAT2 0x1d4 + MX50_PAD_SD1_D3__ESDHC1_DAT3 0x1d4 + + MX50_PAD_SD2_CD__GPIO5_17 0x0 + >; + }; + + pinctrl_sd2: sd2 { + fsl,pins = < + MX50_PAD_SD2_CMD__ESDHC2_CMD 0x1e4 + MX50_PAD_SD2_CLK__ESDHC2_CLK 0xd4 + MX50_PAD_SD2_D0__ESDHC2_DAT0 0x1d4 + MX50_PAD_SD2_D1__ESDHC2_DAT1 0x1d4 + MX50_PAD_SD2_D2__ESDHC2_DAT2 0x1d4 + MX50_PAD_SD2_D3__ESDHC2_DAT3 0x1d4 + >; + }; + + pinctrl_sd2_reset: sd2-reset { + fsl,pins = < + MX50_PAD_ECSPI2_MOSI__GPIO4_17 0x0 + >; + }; + + pinctrl_sd2_vmmc: sd2-vmmc { + fsl,pins = < + MX50_PAD_ECSPI1_SCLK__GPIO4_12 0x0 + >; + }; + + pinctrl_sd3: sd3 { + fsl,pins = < + MX50_PAD_SD3_CMD__ESDHC3_CMD 0x1e4 + MX50_PAD_SD3_CLK__ESDHC3_CLK 0xd4 + MX50_PAD_SD3_D0__ESDHC3_DAT0 0x1d4 + MX50_PAD_SD3_D1__ESDHC3_DAT1 0x1d4 + MX50_PAD_SD3_D2__ESDHC3_DAT2 0x1d4 + MX50_PAD_SD3_D3__ESDHC3_DAT3 0x1d4 + MX50_PAD_SD3_D4__ESDHC3_DAT4 0x1d4 + MX50_PAD_SD3_D5__ESDHC3_DAT5 0x1d4 + MX50_PAD_SD3_D6__ESDHC3_DAT6 0x1d4 + MX50_PAD_SD3_D7__ESDHC3_DAT7 0x1d4 + >; + }; + + pinctrl_uart2: uart2 { + fsl,pins = < + MX50_PAD_UART2_TXD__UART2_TXD_MUX 0x1e4 + MX50_PAD_UART2_RXD__UART2_RXD_MUX 0x1e4 + >; + }; + + pinctrl_usbphy: usbphy { + fsl,pins = < + MX50_PAD_ECSPI2_SS0__GPIO4_19 0x0 + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi_wide"; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbphy>; + vbus-detect-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index ee1e3e8bf4ec..0bfe7c91d0eb 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -26,11 +26,21 @@ gpio3 = &gpio4; gpio4 = &gpio5; gpio5 = &gpio6; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &esdhc1; + mmc1 = &esdhc2; + mmc2 = &esdhc3; + mmc3 = &esdhc4; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &cspi; }; cpus { @@ -76,6 +86,14 @@ }; }; + usbphy0: usbphy-0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + status = "okay"; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -187,7 +205,8 @@ compatible = "fsl,imx50-usb", "fsl,imx27-usb"; reg = <0x53f80000 0x0200>; interrupts = <18>; - clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; + clocks = <&clks IMX5_CLK_USBOH3_GATE>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -411,7 +430,7 @@ reg = <0x63fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index a8220f08dcbf..3596060f52e7 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2017 Zodiac Inflight Innovations - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index a5ee25cedc10..0a4b9a5d9a9c 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -489,7 +489,7 @@ reg = <0x83fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index db2e5bce9b6a..d1770e1d5e50 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -52,7 +52,7 @@ clock-frequency = <400000>; status = "okay"; - stmpe610@41 { + touchscreen@41 { compatible = "st,stmpe610"; reg = <0x41>; id = <0>; diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts new file mode 100644 index 000000000000..f0a3fde0739c --- /dev/null +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; +#include "imx53-m53.dtsi" + +/ { + model = "MENLO M53 EMBEDDED DEVICE"; + compatible = "menlo,m53menlo", "fsl,imx53"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user1 { + label = "TestLed601"; + gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + user2 { + label = "TestLed602"; + gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + eth { + label = "EthLedYe"; + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + }; + + panel { + compatible = "edt,etm070080dh6"; + enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + reg_usbh1_vbus: regulator-usbh1-vbus { + compatible = "regulator-fixed"; + regulator-name = "vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>, + <&clks IMX5_CLK_CKO1_PODF>, + <&clks IMX5_CLK_CKO1>; + assigned-clock-parents = <&clks IMX5_CLK_AHB>; + assigned-clock-rates = <133333334>, <33333334>, <33333334>; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_edt_ft5x06>; + interrupt-parent = <&gpio6>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + dac@60 { + compatible = "microchip,mcp4725"; + reg = <0x60>; + }; +}; + +&i2c2 { + touchscreen@41 { + status = "disabled"; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx53-m53evk { + hoggrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + MX53_PAD_EIM_EB3__GPIO2_31 0x1d5 + MX53_PAD_PATA_DA_0__GPIO7_6 0x1d5 + MX53_PAD_GPIO_19__CCM_CLKO 0x1d5 + MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x1d5 + MX53_PAD_CSI0_DAT4__GPIO5_22 0x1d5 + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1d5 + MX53_PAD_CSI0_DAT6__GPIO5_24 0x1d5 + MX53_PAD_CSI0_DAT7__GPIO5_25 0x1d5 + MX53_PAD_CSI0_DAT8__GPIO5_26 0x1d5 + MX53_PAD_CSI0_DAT9__GPIO5_27 0x1d5 + MX53_PAD_CSI0_DAT10__GPIO5_28 0x1d5 + MX53_PAD_CSI0_DAT11__GPIO5_29 0x1d5 + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1d5 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX53_PAD_CSI0_DAT15__GPIO6_1 0x1d5 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1d5 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX53_PAD_GPIO_7__CAN1_TXCAN 0x1c4 + MX53_PAD_GPIO_8__CAN1_RXCAN 0x1c4 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1c4 + MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4 + >; + }; + + pinctrl_display_gpio: display-gpiogrp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__GPIO5_30 0x1d5 /* Reset */ + MX53_PAD_CSI0_DAT13__GPIO5_31 0x1d5 /* Interrupt */ + >; + }; + + pinctrl_edt_ft5x06: edt-ft5x06grp { + fsl,pins = < + MX53_PAD_PATA_DATA9__GPIO2_9 0x1d5 /* Reset */ + MX53_PAD_CSI0_DAT19__GPIO6_5 0x1d5 /* Interrupt */ + MX53_PAD_PATA_DATA10__GPIO2_10 0x1d5 /* Wake */ + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 + MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4 + MX53_PAD_GPIO_5__I2C3_SCL 0x400001e4 + >; + }; + + pinctrl_lvds0: lvds0grp { + /* LVDS pins only have pin mux configuration */ + fsl,pins = < + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + >; + }; + + pinctrl_usb: usbgrp { + fsl,pins = < + MX53_PAD_GPIO_2__GPIO1_2 0x1d5 + MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5 + >; + }; + }; +}; + +&ldb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds0>; + status = "okay"; + + lvds0: lvds-channel@0 { + reg = <0>; + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@2 { + reg = <2>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb>; + vbus-supply = <®_usbh1_vbus>; + phy_type = "utmi"; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index b3300300aabe..9b672ed2486d 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -702,7 +702,7 @@ reg = <0x63fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index fb01fa6e4224..12b18c801b98 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -247,9 +247,9 @@ gpio-cfg = < 0x0000 /* 0:Default */ 0x0000 /* 1:Default */ - 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 2:FN_DMICCLK */ 0x0000 /* 3:Default */ - 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; }; diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts new file mode 100644 index 000000000000..9eb2b73951b2 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 Eckelmann AG. + * Copyright (C) 2013 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "imx6dl.dtsi" + +/ { + model = "Eckelmann CI 4X10 Board"; + compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl"; + + chosen { + stdout-path = &uart3; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + rmii_clk: clock-rmii { + /* This clock is provided by the phy (KSZ8091RNB) */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + siox { + compatible = "eckelmann,siox-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_siox>; + din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; + dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; + dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>; + status = "okay"; + + flash@0 { + compatible = "everspin,mr25h256"; + reg = <0>; + spi-max-frequency = <15000000>; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&gpio2 { + gpio-line-names = "buzzer", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", "", "", "in2", + "prio2", "prio1", "aux", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio6 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "in1", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + temperature-sensor@49 { + compatible = "ad,ad7414"; + reg = <0x49>; + }; + + rtc@51 { + compatible = "nxp,pcf2127"; + reg = <0x51>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hog { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00000018 /* buzzer */ + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x00000018 /* OUT_1 */ + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x00000018 /* OUT_2 */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x00000018 /* OUT_3 */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x00000000 /* In1 */ + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x00000000 /* In2 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x00000018 /* unused watchdog pin */ + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x00000018 /* unused watchdog pin */ + + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x000100a0 + MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x000100a0 + MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x000100a0 + MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000100a0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x000100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x000100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x000100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x0001b098 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x0001b098 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x0001b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x0001b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x0001b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x0001b0b0 + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x00000018 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x0001b020 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x0001b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x0001b020 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x0001b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + /* without SION i2c doesn't detect bus busy */ + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b820 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b820 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x00000018 + >; + }; + + pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0001b0b0 + >; + }; + + pinctrl_siox: sioxgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x0001b010 /* DIN */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b010 /* DOUT */ + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0001b010 /* DCLK */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x0001b010 /* DLD */ + >; + }; + + pinctrl_uart1_dte: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x0001b010 + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0001b010 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0001b010 /* DCD */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0001b010 /* DTR */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0001b010 /* DSR */ + >; + }; + + pinctrl_uart2_dte: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0001b010 + MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0001b010 + MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0001b010 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b010 /* DCD */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b010 /* DTR */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0001b010 /* DSR */ + >; + }; + + pinctrl_uart3_dce: uart3grp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x0001b010 + MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x0001b010 + >; + }; + + pinctrl_uart4_dce: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x0001b010 + >; + }; + + pinctrl_uart5_dce: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x0001b010 + MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x0001b010 /* RTS */ + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0001b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x00017059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x00010059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x00017059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x00017059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x00017059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x00017059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x00017059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x00017059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x00017059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x00017059 + >; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_dte>; + uart-has-rtscts; + fsl,dte-mode; + dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_dte>; + uart-has-rtscts; + fsl,dte-mode; + dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_dce>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_dce>; + rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_dce>; + rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts index 660d52a245ba..ff3283c83a39 100644 --- a/arch/arm/boot/dts/imx6dl-sabreauto.dts +++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts @@ -11,3 +11,18 @@ model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board"; compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl"; }; + +&cpu0 { + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 1150000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1200000 + 792000 1175000 + 396000 1175000 + >; +}; diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts index 56e5b5050fcf..cb0a5f7d5a19 100644 --- a/arch/arm/boot/dts/imx6q-gw54xx.dts +++ b/arch/arm/boot/dts/imx6q-gw54xx.dts @@ -12,10 +12,30 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-gw54xx.dtsi" +#include <dt-bindings/media/tda1997x.h> / { model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX"; compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q"; + + sound-digital { + compatible = "simple-audio-card"; + simple-audio-card,name = "tda1997x-audio"; + + simple-audio-card,dai-link@0 { + format = "i2s"; + + cpu { + sound-dai = <&ssi2>; + }; + + codec { + bitclock-master; + frame-master; + sound-dai = <&hdmi_receiver>; + }; + }; + }; }; &i2c3 { @@ -35,6 +55,61 @@ }; }; }; + + hdmi_receiver: hdmi-receiver@48 { + compatible = "nxp,tda19971"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tda1997x>; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + DOVDD-supply = <®_3p3v>; + AVDD-supply = <&sw4_reg>; + DVDD-supply = <&sw4_reg>; + #sound-dai-cells = <0>; + nxp,audout-format = "i2s"; + nxp,audout-layout = <0>; + nxp,audout-width = <16>; + nxp,audout-mclk-fs = <128>; + /* + * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] + * and Y[11:4] across 16bits in the same cycle + * which we map to VP[15:08]<->CSI_DATA[19:12] + */ + nxp,vidout-portcfg = + /*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/ + < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, + /*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/ + < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, + /*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/ + < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, + /*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/ + < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; + + port { + tda1997x_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <16>; + hsync-active = <1>; + vsync-active = <1>; + data-active = <1>; + }; + }; + }; +}; + +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <16>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>; + bus-width = <16>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; }; &ipu2_csi1_from_ipu2_csi1_mux { @@ -63,6 +138,30 @@ >; }; + pinctrl_ipu1_csi0: ipu1_csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + pinctrl_ipu2_csi1: ipu2_csi1grp { fsl,pins = < MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0 @@ -78,4 +177,10 @@ MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0 >; }; + + pinctrl_tda1997x: tda1997xgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts index 45eb0b7f75f8..d96ae54be338 100644 --- a/arch/arm/boot/dts/imx6q-logicpd.dts +++ b/arch/arm/boot/dts/imx6q-logicpd.dts @@ -21,6 +21,8 @@ panel-lvds0 { compatible = "okaya,rs800480t-7x0gp"; + power-supply = <®_lcd_reset>; + backlight = <&backlight>; port { panel_in_lvds0: endpoint { @@ -38,7 +40,6 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-always-on; vin-supply = <®_3v3>; startup-delay-us = <500000>; }; @@ -52,7 +53,6 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-always-on; vin-supply = <®_lcd>; }; }; diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts index 0f0743db2779..a1c5e69d81ba 100644 --- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2016-2017 Zodiac Inflight Innovations - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi index 397e205551c4..70d26616d771 100644 --- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi @@ -77,8 +77,6 @@ pwm_fan: pwm-fan { compatible = "pwm-fan"; - cooling-min-state = <0>; - cooling-max-state = <4>; #cooling-cells = <2>; pwms = <&pwm4 0 50000>; cooling-levels = <0 64 127 191 255>; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 81b2fcf6eedf..e4d1c5250d1e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -10,6 +10,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> / { /* these are used by bootloader for disabling nodes */ @@ -115,12 +116,12 @@ }; }; - sound { + sound-analog { compatible = "fsl,imx6q-ventana-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "sgtl5000-audio"; ssi-controller = <&ssi1>; - audio-codec = <&codec>; + audio-codec = <&sgtl5000>; audio-routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", @@ -134,6 +135,25 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */ status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */ + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */ + IMX_AUDMUX_V2_PTCR_SYN) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + aud5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(1)>; + }; }; &can1 { @@ -332,7 +352,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - codec: sgtl5000@a { + sgtl5000: audio-codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; @@ -476,6 +496,9 @@ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + MX6QDL_PAD_EIM_D25__AUD5_RXC 0x130b0 + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x130b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 8e46a80f57a4..c23ba229fd05 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -46,6 +46,8 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/media/tda1997x.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> / { /* these are used by bootloader for disabling nodes */ @@ -99,6 +101,50 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + sound-digital { + compatible = "simple-audio-card"; + simple-audio-card,name = "tda1997x-audio"; + + simple-audio-card,dai-link@0 { + format = "i2s"; + + cpu { + sound-dai = <&ssi2>; + }; + + codec { + bitclock-master; + frame-master; + sound-dai = <&hdmi_receiver>; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */ + status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */ + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */ + IMX_AUDMUX_V2_PTCR_SYN) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + aud5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0)>; + }; }; &can1 { @@ -264,6 +310,60 @@ #gpio-cells = <2>; }; + hdmi_receiver: hdmi-receiver@48 { + compatible = "nxp,tda19971"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tda1997x>; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + DOVDD-supply = <®_3p3>; + AVDD-supply = <®_1p8b>; + DVDD-supply = <®_1p8a>; + #sound-dai-cells = <0>; + nxp,audout-format = "i2s"; + nxp,audout-layout = <0>; + nxp,audout-width = <16>; + nxp,audout-mclk-fs = <128>; + /* + * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] + * and Y[11:4] across 16bits in the same cycle + * which we map to VP[15:08]<->CSI_DATA[19:12] + */ + nxp,vidout-portcfg = + /*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/ + < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, + /*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/ + < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, + /*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/ + < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, + /*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/ + < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; + + port { + tda1997x_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <16>; + hsync-active = <1>; + vsync-active = <1>; + data-active = <1>; + }; + }; + }; +}; + +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <16>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>; + bus-width = <16>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; }; &pcie { @@ -321,6 +421,14 @@ }; &iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_DISP0_DAT14__AUD5_RXC 0x130b0 + MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS 0x130b0 + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 @@ -376,6 +484,30 @@ >; }; + pinctrl_ipu1_csi0: ipu1_csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ @@ -400,6 +532,12 @@ >; }; + pinctrl_tda1997x: tda1997xgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index 9cb9a7439121..aee9221f0f29 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -311,7 +311,7 @@ tlv320aic3105: codec@18 { compatible = "ti,tlv320aic3x"; reg = <0x18>; - gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; clocks = <&clks IMX6QDL_CLK_CKO>; ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */ /* Regulators */ diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 027df06c5dc7..7e53ac6cfa8a 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -79,7 +79,7 @@ status = "okay"; cs-gpios = <&gpio4 24 0>; - flash@0 { + som_flash: flash@0 { compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; @@ -121,7 +121,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - eeprom@50 { + som_eeprom: eeprom@50 { compatible = "atmel,24c32"; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi index 8752a4961c47..c41cac502bac 100644 --- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi +++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi @@ -183,7 +183,7 @@ IOVDD-supply = <®_3p3v>; DVDD-supply = <®_3p3v>; ai3x-ocmv = <0>; - gpio-reset = <&gpio5 5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 69942c7ff89d..93be00a60c88 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2016-2017 Zodiac Inflight Innovations - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -210,6 +174,7 @@ panel { power-supply = <®_3p3v_display>; + backlight = <&sp_backlight>; status = "disabled"; port { @@ -327,7 +292,7 @@ compatible = "zii,rave-sp-watchdog"; }; - backlight { + sp_backlight: backlight { compatible = "zii,rave-sp-backlight"; }; @@ -384,7 +349,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; accel@1c { @@ -528,6 +493,11 @@ }; }; + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; + temp-sense@48 { compatible = "national,lm75"; reg = <0x48>; @@ -572,7 +542,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; touchscreen@20 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index fe17a3405edc..b3a77bcf00d5 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -4,6 +4,7 @@ // Copyright 2011 Linaro Ltd. #include <dt-bindings/clock/imx6qdl-clock.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -279,6 +280,7 @@ ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; + num-viewport = <4>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -833,6 +835,14 @@ status = "disabled"; }; + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + snvs_lpgpr: snvs-lpgpr { compatible = "fsl,imx6q-snvs-lpgpr"; }; @@ -918,7 +928,7 @@ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SDMA>, + clocks = <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; @@ -1129,14 +1139,16 @@ reg = <0x021ac000 0x4000>; }; - mmdc0: mmdc@21b0000 { /* MMDC0 */ + mmdc0: memory-controller@21b0000 { /* MMDC0 */ compatible = "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>; }; - mmdc1: mmdc@21b4000 { /* MMDC1 */ + mmdc1: memory-controller@21b4000 { /* MMDC1 */ + compatible = "fsl,imx6q-mmdc"; reg = <0x021b4000 0x4000>; + status = "disabled"; }; weim: weim@21b8000 { diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts index 98bf7a6b2850..57de447c4609 100644 --- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2016-2017 Zodiac Inflight Innovations - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 4b4813f176cd..9ddbeea64b72 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -23,6 +23,13 @@ gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + mmc3 = &usdhc4; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -741,7 +748,7 @@ reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_SDMA>, - <&clks IMX6SL_CLK_SDMA>; + <&clks IMX6SL_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; /* imx6sl reuses imx6q sdma firmware */ @@ -922,7 +929,7 @@ status = "disabled"; }; - mmdc: mmdc@21b0000 { + memory-controller@21b0000 { compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; clocks = <&clks IMX6SL_CLK_MMDC_P0_IPG>; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 62847c68330b..1b4899f0fcde 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -64,6 +64,7 @@ 198000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6SLL_CLK_ARM>, <&clks IMX6SLL_CLK_PLL2_PFD2>, <&clks IMX6SLL_CLK_STEP>, @@ -621,7 +622,7 @@ compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SLL_CLK_SDMA>, + clocks = <&clks IMX6SLL_CLK_IPG>, <&clks IMX6SLL_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 5b16e65f7696..b16a123990a2 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -820,7 +820,7 @@ compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SX_CLK_SDMA>, + clocks = <&clks IMX6SX_CLK_IPG>, <&clks IMX6SX_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; @@ -1017,7 +1017,7 @@ status = "disabled"; }; - mmdc: mmdc@21b0000 { + memory-controller@21b0000 { compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 62ed30c781ed..bbf010c73336 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -708,7 +708,7 @@ "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6UL_CLK_SDMA>, + clocks = <&clks IMX6UL_CLK_IPG>, <&clks IMX6UL_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; @@ -914,7 +914,7 @@ status = "disabled"; }; - mmdc: mmdc@21b0000 { + memory-controller@21b0000 { compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>; diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi new file mode 100644 index 000000000000..50abf18ad30b --- /dev/null +++ b/arch/arm/boot/dts/imx7-mba7.dtsi @@ -0,0 +1,550 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Include file for TQ Systems MBa7 carrier board. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + * + * Note: This file does not include nodes for all peripheral devices. + * As device driver coverage increases additional nodes can be added. + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + beeper { + compatible = "gpio-beeper"; + gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>; + }; + + chosen { + stdout-path = &uart6; + }; + + gpio_buttons: gpio-keys { + compatible = "gpio-keys"; + + button-0 { + /* #SWITCH_A */ + label = "S11"; + linux,code = <KEY_1>; + gpios = <&pca9555 13 GPIO_ACTIVE_LOW>; + }; + + button-1 { + /* #SWITCH_B */ + label = "S12"; + linux,code = <KEY_2>; + gpios = <&pca9555 14 GPIO_ACTIVE_LOW>; + }; + + button-2 { + /* #SWITCH_C */ + label = "S13"; + linux,code = <KEY_3>; + gpios = <&pca9555 15 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led1 { + label = "led1"; + gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + label = "led2"; + gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_SD1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_fec1_pwdn: regulator-fec1-pwdn { + compatible = "regulator-fixed"; + regulator-name = "PWDN_FEC1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_fec2_pwdn: regulator-fec2-pwdn { + compatible = "regulator-fixed"; + regulator-name = "PWDN_FEC2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mpcie_1v5: regulator-mpcie-1v5 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V5_MPCIE"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_mpcie_3v3: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_MPCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_mba_12v0: regulator-mba-12v0 { + compatible = "regulator-fixed"; + regulator-name = "VCC12V0_MBA7"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lvds_transmitter: regulator-lvds-transmitter { + compatible = "regulator-fixed"; + regulator-name = "#SHTDN_LVDS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_REF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&sw2_reg>; + }; + + reg_audio_3v3: regulator-audio-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_AUDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&adc2 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + num-chipselects = <3>; + cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>, + <&gpio4 2 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-chipselects = <1>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-reset-delay = <1>; + phy-supply = <®_fec1_pwdn>; + phy-handle = <ðphy1_0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1_0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + /* LED1: Link/Activity, LED2: Error */ + ti,led-function = <0x0db0>; + /* Active low, LED1 and LED2 driven by phy */ + ti,led-ctrl = <0x1001>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + lm75: temperature-sensor@49 { + compatible = "national,lm75"; + reg = <0x49>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clock-names = "mclk"; + ldoin-supply = <®_audio_3v3>; + iov-supply = <®_audio_3v3>; + }; + + pca9555: gpio-expander@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9555>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio7>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_mba7_1>; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x7c + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x74 + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x74 + MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 0x74 + MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x74 + MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x74 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c + MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74 + MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74 + MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0 0x74 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x02 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x00 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x79 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x79 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x79 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79 + /* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */ + MX7D_PAD_ENET1_COL__GPIO7_IO15 0x40000070 + /* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */ + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x40000078 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x5a + MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x52 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x5a + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x52 + >; + }; + + pinctrl_hog_mba7_1: hogmba71grp { + fsl,pins = < + /* Limitation: WDOG2_B / WDOG2_RESET not usable */ + MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13 0x4000007c + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x40000074 + /* #BOOT_EN */ + MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x40000010 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000078 + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000078 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x40000078 + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x40000078 + >; + }; + + + pinctrl_pca9555: pca95550grp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x78 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x7e + MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x76 + MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x76 + MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x7e + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e + MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76 + MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS 0x76 + MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS 0x7e + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x7e + MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x76 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x7d + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x75 + MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x75 + MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x7d + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x7e + MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x76 + MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS 0x76 + /* Limitation: RTS is not connected */ + MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS 0x7e + >; + }; + + pinctrl_usdhc1_gpio: usdhc1grp_gpio { + fsl,pins = < + /* WP */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x7c + /* CD */ + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x7c + /* VSELECT */ + MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5e + MX7D_PAD_SD1_CLK__SD1_CLK 0x57 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5e + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5e + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5e + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5e + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x57 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x57 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_pwm1: pwm1grp { + fsl,pins = < + /* LCD_CONTRAST */ + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x50 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x5c + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59 + >; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh { + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + vbus-supply = <®_usb_otg1_vbus>; + srp-disable; + hnp-disable; + adp-disable; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_sd1_vmmc>; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi new file mode 100644 index 000000000000..9aaed85138cb --- /dev/null +++ b/arch/arm/boot/dts/imx7-tqma7.dtsi @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/ { + memory@80000000 { + device_type = "memory"; + /* 512 MB - default configuration */ + reg = <0x80000000 0x20000000>; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + pfuze3000: pmic@8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic1>; + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97b: temperature-sensor-eeprom@1e { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1e>; + status = "okay"; + }; + + /* ST M24C64 */ + m24c64: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + status = "okay"; + }; + + at24c02: eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + pagesize = <16>; + status = "okay"; + }; + + ds1339: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x40000078 + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x40000078 + >; + }; + + pinctrl_pmic1: pmic1grp { + fsl,pins = < + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x4000005C + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x56 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x51 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x51 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30 + >; + }; +}; + +&sdma { + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + vmmc-supply = <&vgen4_reg>; + vqmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + /* + * Errata e10574: + * WDOG reset needs to run with WDOG_RESET_B signal enabled. + * X1-51 (WDOG1#) signal needs carrier board handling to reset + * TQMa7 on X1-22 (RESET_IN#). + */ + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts new file mode 100644 index 000000000000..221274c73dbd --- /dev/null +++ b/arch/arm/boot/dts/imx7d-mba7.dts @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/dts-v1/; + +#include "imx7d-tqma7.dtsi" +#include "imx7-mba7.dtsi" + +/ { + model = "TQ Systems TQMa7D board on MBa7 carrier board"; + compatible = "tq,imx7d-mba7", "fsl,imx7d"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-reset-delay = <1>; + phy-supply = <®_fec2_pwdn>; + phy-handle = <ðphy2_0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy2_0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + /* LED1: Link/Activity, LED2: error */ + ti,led-function = <0x0db0>; + /* active low, LED1/2 driven by phy */ + ti,led-ctrl = <0x1001>; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_mba7_1>; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET2_MDIO 0x02 + MX7D_PAD_SD2_WP__ENET2_MDC 0x00 + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x71 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x71 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x71 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x71 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x71 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x71 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x79 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x79 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x79 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x79 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x79 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x79 + /* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x40000070 + /* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */ + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x40000078 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* #pcie_wake */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x70 + /* #pcie_rst */ + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x70 + /* #pcie_dis */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x70 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 + >; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + /* 1.5V logically from 3.3V */ + /* probe deferral not supported */ + /* pcie-bus-supply = <®_mpcie_1v5>; */ + reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>; + disable-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; + power-on-gpio = <&gpio2 30 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + vbus-supply = <®_usb_otg2_vbus>; + srp-disable; + hnp-disable; + adp-disable; + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi new file mode 100644 index 000000000000..8ad3048dac0d --- /dev/null +++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +#include "imx7d.dtsi" +#include "imx7-tqma7.dtsi" diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts new file mode 100644 index 000000000000..3e467a94e8a6 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -0,0 +1,941 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device tree file for ZII's RPU2 board + * + * RPU - Remote Peripheral Unit + * + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include <dt-bindings/thermal/thermal.h> +#include "imx7d.dtsi" + +/ { + model = "ZII RPU2 Board"; + compatible = "zii,imx7d-rpu2", "fsl,imx7d"; + + chosen { + stdout-path = &uart1; + }; + + cs2000_ref: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + cs2000_in_dummy: dummy-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + debug { + label = "zii:green:debug1"; + gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc2 1>; + }; + + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_stby>; + regulator-name = "can1-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2_stby>; + regulator-name = "can2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "GEN_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v_main: regulator-5p0v-main { + compatible = "regulator-fixed"; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + sound1 { + compatible = "simple-audio-card"; + simple-audio-card,name = "Audio Output 1"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound1_codec>; + simple-audio-card,frame-master = <&sound1_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "HPL", + "RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa1>; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + sound1_codec: simple-audio-card,codec { + sound-dai = <&codec1>; + clocks = <&cs2000>; + }; + }; + + sound2 { + compatible = "simple-audio-card"; + simple-audio-card,name = "Audio Output 2"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound2_codec>; + simple-audio-card,frame-master = <&sound2_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "HPL", + "RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa2>; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + sound2_codec: simple-audio-card,codec { + sound-dai = <&codec2>; + clocks = <&cs2000>; + }; + }; + + sound3 { + compatible = "simple-audio-card"; + simple-audio-card,name = "Audio Output 3"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound3_codec>; + simple-audio-card,frame-master = <&sound3_codec>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "HPL", + "RIGHTIN", "HPR"; + simple-audio-card,aux-devs = <&hpa3>; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + sound3_codec: simple-audio-card,codec { + sound-dai = <&codec3>; + clocks = <&cs2000>; + }; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&adc2 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; +}; + +&clks { + assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <884736000>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch: switch@0 { + compatible = "marvell,mv88e6085"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + reg = <0>; + eeprom-length = <512>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "eth_cu_1000_1"; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_2"; + }; + + port@2 { + reg = <2>; + label = "pic"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&fec1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "gigabit_proc"; + ethernet = <&fec2>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + fsl,magic-packet; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>; + + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", + "usb_1_en_b", + "usb_2_en_b", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio2>; + + gpio-line-names = "12v_out_en_1", + "12v_out_en_2", + "12v_out_en_3", + "28v_out_en_5", + "28v_out_en_1", + "28v_out_en_2", + "28v_out_en_3", + "28v_out_en_4", + "", "", + "usb_3_en_b", + "usb_4_en_b", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + cs2000: clkgen@4e { + compatible = "cirrus,cs2000-cp"; + reg = <0x4e>; + #clock-cells = <0>; + clock-names = "clk_in", "ref_clk"; + clocks = <&cs2000_in_dummy>, <&cs2000_ref>; + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24000000>; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec2: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec2>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + gpio-reset = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + hpa2: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa2>; + reg = <0x60>; + power-gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0v_main>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + codec3: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec3>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + gpio-reset = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + hpa3: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa3>; + reg = <0x60>; + power-gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0v_main>; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + codec1: codec@18 { + compatible = "ti,tlv320dac3100"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec1>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <®_3p3v>; + SPRVDD-supply = <®_3p3v>; + SPLVDD-supply = <®_3p3v>; + AVDD-supply = <®_3p3v>; + IOVDD-supply = <®_3p3v>; + DVDD-supply = <&vgen4_reg>; + gpio-reset = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + + hpa1: amp@60 { + compatible = "ti,tpa6130a2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpa1>; + reg = <0x60>; + power-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; + Vdd-supply = <®_5p0v_main>; + }; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX7D_SAI2_ROOT_SRC>, + <&clks IMX7D_SAI2_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>, + <&clks IMX7D_SAI3_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + no-1-8-v; + no-sdio; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sdio; + no-sd; + keep-power-in-suspend; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x2 + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x2 + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x2 + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x59 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 + MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT 0x1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x59 + MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x59 + >; + }; + + pinctrl_flexcan1_stby: flexcan1stbygrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x59 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 + >; + }; + + pinctrl_flexcan2_stby: flexcan2stbygrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 + >; + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x00 + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x00 + >; + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x00 + MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x00 + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x00 + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x03 + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x03 + MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x03 + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x03 + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x03 + MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x00 + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x00 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x4000007f + MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x4000007f + MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x4000007f + MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f + MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x4000007f + >; + }; + + pinctrl_leds_debug: debuggrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x59 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f + MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x30 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f + MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f + MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f + MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f + MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30 + >; + }; + + pinctrl_tpa1: tpa6130-1grp { + fsl,pins = < + MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x40000038 + >; + }; + + pinctrl_tpa2: tpa6130-2grp { + fsl,pins = < + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x40000038 + >; + }; + + pinctrl_tpa3: tpa6130-3grp { + fsl,pins = < + MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x40000038 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79 + MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX7D_PAD_SD2_DATA0__UART4_DCE_RX 0x79 + MX7D_PAD_SD2_DATA1__UART4_DCE_TX 0x79 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x59 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_codec1: dac1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x40000038 + >; + }; + + pinctrl_codec2: dac2grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x40000038 + >; + }; + + pinctrl_codec3: dac3grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x40000038 + >; + }; + + pinctrl_switch: switchgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x08 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 6eb98e7c568d..f33b560821b8 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -154,6 +154,7 @@ ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ num-lanes = <1>; + num-viewport = <4>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts new file mode 100644 index 000000000000..a143d566a38b --- /dev/null +++ b/arch/arm/boot/dts/imx7s-mba7.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/dts-v1/; + +#include "imx7s-tqma7.dtsi" +#include "imx7-mba7.dtsi" + +/ { + model = "TQ Systems TQMa7S board on MBa7 carrier board"; + compatible = "tq,imx7s-mba7", "fsl,imx7s"; +}; diff --git a/arch/arm/boot/dts/imx7s-tqma7.dtsi b/arch/arm/boot/dts/imx7s-tqma7.dtsi new file mode 100644 index 000000000000..5f5433eb7dd7 --- /dev/null +++ b/arch/arm/boot/dts/imx7s-tqma7.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC. + * + * Copyright (C) 2016 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +#include "imx7s.dtsi" +#include "imx7-tqma7.dtsi" diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index 23431faecaf4..d6b4888fa686 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -55,6 +55,14 @@ regulator-always-on; }; + reg_peri_3p15v: regulator-peri-3p15v { + compatible = "regulator-fixed"; + regulator-name = "peri_3p15v_reg"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -77,6 +85,10 @@ assigned-clock-rates = <884736000>; }; +&csi { + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -121,6 +133,8 @@ swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; }; snvs_reg: vsnvs { @@ -178,6 +192,27 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ov2680: camera@36 { + compatible = "ovti,ov2680"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov2680>; + reg = <0x36>; + clocks = <&osc>; + clock-names = "xvclk"; + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + DOVDD-supply = <&sw2_reg>; + DVDD-supply = <&sw2_reg>; + AVDD-supply = <®_peri_3p15v>; + + port { + ov2680_to_mipi: endpoint { + remote-endpoint = <&mipi_from_sensor>; + clock-lanes = <0>; + data-lanes = <1>; + }; + }; + }; }; &i2c3 { @@ -211,6 +246,22 @@ }; }; +&mipi_csi { + clock-frequency = <166000000>; + fsl,csis-hs-settle = <3>; + status = "okay"; + + port@0 { + reg = <0>; + + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; + + }; +}; + &sai1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai1>; @@ -277,6 +328,10 @@ status = "okay"; }; +&video_mux { + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -331,6 +386,12 @@ >; }; + pinctrl_ov2680: ov2660grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x14 + >; + }; + pinctrl_sai1: sai1grp { fsl,pins = < MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index e88f53a4c7f4..106711d2c01b 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/imx7-reset.h> #include "imx7d-pinfunc.h" / { @@ -497,8 +498,43 @@ gpr: iomuxc-gpr@30340000 { compatible = "fsl,imx7d-iomuxc-gpr", - "fsl,imx6q-iomuxc-gpr", "syscon"; + "fsl,imx6q-iomuxc-gpr", "syscon", + "simple-mfd"; reg = <0x30340000 0x10000>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <0>; + mux-reg-masks = <0x14 0x00000010>; + }; + + video_mux: csi-mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + csi_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_csi_mux>; + }; + }; + + port@2 { + reg = <2>; + + csi_mux_to_csi: endpoint { + remote-endpoint = <&csi_from_csi_mux>; + }; + }; + }; }; ocotp: ocotp-ctrl@30350000 { @@ -606,7 +642,13 @@ #address-cells = <1>; #size-cells = <0>; - pgc_pcie_phy: pgc-power-domain@1 { + pgc_mipi_phy: power-domain@0 { + #power-domain-cells = <0>; + reg = <0>; + power-supply = <®_1p0d>; + }; + + pgc_pcie_phy: power-domain@1 { #power-domain-cells = <0>; reg = <1>; power-supply = <®_1p0d>; @@ -628,6 +670,7 @@ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_ADC_ROOT_CLK>; clock-names = "adc"; + #io-channel-cells = <1>; status = "disabled"; }; @@ -637,6 +680,7 @@ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_ADC_ROOT_CLK>; clock-names = "adc"; + #io-channel-cells = <1>; status = "disabled"; }; @@ -696,6 +740,23 @@ status = "disabled"; }; + csi: csi@30710000 { + compatible = "fsl,imx7-csi"; + reg = <0x30710000 0x10000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CSI_MCLK_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "axi", "mclk", "dcic"; + status = "disabled"; + + port { + csi_from_csi_mux: endpoint { + remote-endpoint = <&csi_mux_to_csi>; + }; + }; + }; + lcdif: lcdif@30730000 { compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; reg = <0x30730000 0x10000>; @@ -705,6 +766,35 @@ clock-names = "pix", "axi"; status = "disabled"; }; + + mipi_csi: mipi-csi@30750000 { + compatible = "fsl,imx7-mipi-csi2"; + reg = <0x30750000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "pclk", "wrap", "phy"; + power-domains = <&pgc_mipi_phy>; + phy-supply = <®_1p0d>; + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; + reset-names = "mrst"; + status = "disabled"; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; + }; + }; }; aips3: aips-bus@30800000 { @@ -1067,8 +1157,8 @@ compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; reg = <0x30bd0000 0x10000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_SDMA_CORE_CLK>, - <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_SDMA_CORE_CLK>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index fca6e50f37c8..d6b711011cba 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -286,6 +286,12 @@ status = "disabled"; }; + memory-controller@40ab0000 { + compatible = "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc"; + reg = <0x40ab0000 0x1000>; + clocks = <&pcc3 IMX7ULP_CLK_MMDC>; + }; + iomuxc1: pinctrl@40ac0000 { compatible = "fsl,imx7ulp-iomuxc1"; reg = <0x40ac0000 0x1000>; @@ -359,5 +365,11 @@ compatible = "fsl,imx7ulp-sim", "syscon"; reg = <0x410a3000 0x1000>; }; + + ocotp: ocotp-ctrl@410a6000 { + compatible = "fsl,imx7ulp-ocotp", "syscon"; + reg = <0x410a6000 0x4000>; + clocks = <&scg1 IMX7ULP_CLK_DUMMY>; + }; }; }; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts new file mode 100644 index 000000000000..8fcd95805ff4 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Linksys NSLU2 + */ + +/dts-v1/; + +#include "intel-ixp42x.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives)"; + compatible = "linksys,nslu2", "intel,ixp42x"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 32 MB SDRAM */ + device_type = "memory"; + reg = <0x00000000 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; + stdout-path = "uart0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; + + leds { + compatible = "gpio-leds"; + led-status { + label = "nslu2:red:status"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + led-ready { + label = "nslu2:green:ready"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + led-disk-1 { + label = "nslu2:green:disk-1"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led-disk-2 { + label = "nslu2:green:disk-2"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-power { + wakeup-source; + linux,code = <KEY_POWER>; + label = "power"; + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + }; + button-reset { + wakeup-source; + linux,code = <KEY_ESC>; + label = "reset"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; + + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6f { + compatible = "xicor,x1205"; + reg = <0x6f>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + timeout-ms = <5000>; + }; + + /* The first 16MB region on the expansion bus */ + flash@50000000 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 8 MB of Flash in 0x20000 byte blocks + * mapped in at 0x50000000 + */ + reg = <0x50000000 0x800000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0x7e0000 */ + fis-index-block = <0x3f>; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi new file mode 100644 index 000000000000..a9622ca850cc --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp42x.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP 42x series. This series has 32 interrupts. + */ +#include "intel-ixp4xx.dtsi" + +/ { + soc { + interrupt-controller@c8003000 { + compatible = "intel,ixp42x-interrupt"; + }; + + /* + * This is the USB Device Mode (UDC) controller, which is used + * to present the IXP4xx as a device on a USB bus. + */ + usb@c800b000 { + compatible = "intel,ixp4xx-udc"; + reg = <0xc800b000 0x1000>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts new file mode 100644 index 000000000000..ba1163a1e1e7 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Gateworks IXP43x-based Cambria GW2358 + */ + +/dts-v1/; + +#include "intel-ixp43x.dtsi" + +/ { + model = "Gateworks Cambria GW2358"; + compatible = "gateworks,gw2358", "intel,ixp43x"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB SDRAM */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; + stdout-path = "uart0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; + + leds { + compatible = "gpio-leds"; + led-user { + label = "gw2358:green:LED"; + gpios = <&pld1 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + + hwmon@28 { + compatible = "adi,ad7418"; + reg = <0x28>; + }; + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; + eeprom@51 { + compatible = "atmel,24c08"; + reg = <0x51>; + pagesize = <16>; + size = <1024>; + read-only; + }; + pld0: pld@56 { + compatible = "gateworks,pld-gpio"; + reg = <0x56>; + gpio-controller; + #gpio-cells = <2>; + }; + /* This PLD just handles the LED and user button */ + pld1: pld@57 { + compatible = "gateworks,pld-gpio"; + reg = <0x57>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + flash@50000000 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 32 MB of Flash in 0x20000 byte blocks + * mapped in at 0x50000000 + */ + reg = <0x50000000 0x2000000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0x1fe0000 */ + fis-index-block = <0xff>; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel-ixp43x.dtsi new file mode 100644 index 000000000000..494fb2ff57a0 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp43x.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP 43x series. This series has 64 interrupts and adds a few more + * peripherals over the 42x series. + */ +#include "intel-ixp4xx.dtsi" + +/ { + soc { + interrupt-controller@c8003000 { + compatible = "intel,ixp43x-interrupt"; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi new file mode 100644 index 000000000000..f8cd506659dc --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a + * few more peripherals over the 42x and 43x series so this extends the + * basic IXP4xx DTSI. + */ +#include "intel-ixp4xx.dtsi" + +/ { + soc { + interrupt-controller@c8003000 { + compatible = "intel,ixp43x-interrupt"; + }; + + /* + * This is the USB Device Mode (UDC) controller, which is used + * to present the IXP4xx as a device on a USB bus. + */ + usb@c800b000 { + compatible = "intel,ixp4xx-udc"; + reg = <0xc800b000 0x1000>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c@c8011000 { + compatible = "intel,ixp4xx-i2c"; + reg = <0xc8011000 0x18>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi new file mode 100644 index 000000000000..d4a09584f417 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP 4xx series. + */ +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + interrupt-parent = <&intcon>; + + qmgr: queue-manager@60000000 { + compatible = "intel,ixp4xx-ahb-queue-manager"; + reg = <0x60000000 0x4000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart0: serial@c8000000 { + compatible = "intel,xscale-uart"; + reg = <0xc8000000 0x1000>; + /* + * The reg-offset and reg-shift is a side effect + * of running the platform in big endian mode. + */ + reg-offset = <3>; + reg-shift = <2>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <14745600>; + no-loopback-test; + }; + + gpio0: gpio@c8004000 { + compatible = "intel,ixp4xx-gpio"; + reg = <0xc8004000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + intcon: interrupt-controller@c8003000 { + /* + * Note: no compatible string. The subvariant of the + * chip needs to define what version it is. The + * location of the interrupt controller is fixed in + * memory across all variants. + */ + reg = <0xc8003000 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + timer@c8005000 { + compatible = "intel,ixp4xx-timer"; + reg = <0xc8005000 0x100>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + }; + + npe@c8006000 { + compatible = "intel,ixp4xx-network-processing-engine"; + reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts index f46a11827ef6..4adf4c96f798 100644 --- a/arch/arm/boot/dts/lpc3250-ea3250.dts +++ b/arch/arm/boot/dts/lpc3250-ea3250.dts @@ -201,6 +201,7 @@ &mac { phy-mode = "rmii"; use-iram; + status = "okay"; }; /* Here, choose exactly one from: ohci, usbd */ diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts index ebd19258e22b..1b15f798794b 100644 --- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -134,6 +134,7 @@ &mac { phy-mode = "rmii"; use-iram; + status = "okay"; }; /* Here, choose exactly one from: ohci, usbd */ @@ -201,8 +202,6 @@ }; &ssp0 { - #address-cells = <1>; - #size-cells = <0>; num-cs = <1>; cs-gpios = <&gpio 3 5 0>; status = "okay"; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 20b38f4ade37..7b7ec7b1217b 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -1,14 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * NXP LPC32xx SoC * + * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com> * Copyright 2012 Roland Stigge <stigge@antcom.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #include <dt-bindings/clock/lpc32xx-clock.h> @@ -152,6 +147,7 @@ reg = <0x31060000 0x1000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_MAC>; + status = "disabled"; }; emc: memory-controller@31080000 { @@ -185,6 +181,8 @@ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_SSP0>; clock-names = "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -192,6 +190,8 @@ compatible = "nxp,lpc3220-spi"; reg = <0x20088000 0x1000>; clocks = <&clk LPC32XX_CLK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -205,6 +205,8 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_SSP1>; clock-names = "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -212,12 +214,15 @@ compatible = "nxp,lpc3220-spi"; reg = <0x20090000 0x1000>; clocks = <&clk LPC32XX_CLK_SPI2>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; i2s0: i2s@20094000 { compatible = "nxp,lpc3220-i2s"; reg = <0x20094000 0x1000>; + status = "disabled"; }; sd: sd@20098000 { @@ -232,7 +237,8 @@ i2s1: i2s@2009c000 { compatible = "nxp,lpc3220-i2s"; - reg = <0x2009C000 0x1000>; + reg = <0x2009c000 0x1000>; + status = "disabled"; }; /* UART5 first since it is the default console, ttyS0 */ @@ -275,7 +281,7 @@ i2c1: i2c@400a0000 { compatible = "nxp,pnx-i2c"; - reg = <0x400A0000 0x100>; + reg = <0x400a0000 0x100>; interrupt-parent = <&sic1>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; @@ -286,7 +292,7 @@ i2c2: i2c@400a8000 { compatible = "nxp,pnx-i2c"; - reg = <0x400A8000 0x100>; + reg = <0x400a8000 0x100>; interrupt-parent = <&sic1>; interrupts = <18 IRQ_TYPE_LEVEL_LOW>; #address-cells = <1>; @@ -297,7 +303,7 @@ mpwm: mpwm@400e8000 { compatible = "nxp,lpc3220-motor-pwm"; - reg = <0x400E8000 0x78>; + reg = <0x400e8000 0x78>; status = "disabled"; #pwm-cells = <2>; }; @@ -396,7 +402,7 @@ timer4: timer@4002c000 { compatible = "nxp,lpc3220-timer"; - reg = <0x4002C000 0x1000>; + reg = <0x4002c000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; clocks = <&clk LPC32XX_CLK_TIMER4>; clock-names = "timerclk"; @@ -414,7 +420,7 @@ watchdog: watchdog@4003c000 { compatible = "nxp,pnx4008-wdt"; - reg = <0x4003C000 0x1000>; + reg = <0x4003c000 0x1000>; clocks = <&clk LPC32XX_CLK_WDOG>; }; @@ -453,7 +459,7 @@ timer1: timer@4004c000 { compatible = "nxp,lpc3220-timer"; - reg = <0x4004C000 0x1000>; + reg = <0x4004c000 0x1000>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; clocks = <&clk LPC32XX_CLK_TIMER1>; clock-names = "timerclk"; @@ -479,7 +485,7 @@ pwm1: pwm@4005c000 { compatible = "nxp,lpc3220-pwm"; - reg = <0x4005C000 0x4>; + reg = <0x4005c000 0x4>; clocks = <&clk LPC32XX_CLK_PWM1>; assigned-clocks = <&clk LPC32XX_CLK_PWM1>; assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; @@ -488,7 +494,7 @@ pwm2: pwm@4005c004 { compatible = "nxp,lpc3220-pwm"; - reg = <0x4005C004 0x4>; + reg = <0x4005c004 0x4>; clocks = <&clk LPC32XX_CLK_PWM2>; assigned-clocks = <&clk LPC32XX_CLK_PWM2>; assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts index ba1ddd93b8f8..dcb1d9bd0922 100644 --- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -204,7 +204,6 @@ }; &qspi { - fsl,qspi-has-second-chip; status = "okay"; flash: flash@0 { diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts index ca60730dda40..74a67604876c 100644 --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -146,6 +146,10 @@ status = "okay"; }; +&esdhc { + status = "okay"; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index b10ff5877b4c..a51a61c1f69b 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -186,7 +186,6 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; clocks = <&clockgen 4 1>, <&clockgen 4 1>; - big-endian; status = "disabled"; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 6f54a8897574..8841783aceec 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -252,6 +252,15 @@ #size-cells = <0>; status = "disabled"; }; + + rtc: rtc@740 { + compatible = "amlogic,meson6-rtc"; + reg = <0x740 0x14>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; }; usb0: usb@c9040000 { diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index a9781243453e..7ef442462ea4 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -345,6 +345,11 @@ status = "disabled"; }; + clock-measure@8758 { + compatible = "amlogic,meson8-clk-measure"; + reg = <0x8758 0x1c>; + }; + pinctrl_cbus: pinctrl@9880 { compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0x9880 0x10>; @@ -536,6 +541,11 @@ compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; }; +&rtc { + compatible = "amlogic,meson8-rtc"; + resets = <&reset RESET_RTC>; +}; + &saradc { compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc"; clocks = <&clkc CLKID_XTAL>, diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 3ca9638fad09..9bf4249cb60d 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -88,6 +88,14 @@ }; }; + rtc32k_xtal: rtc32k-xtal-clk { + /* X2 in the schematics */ + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "RTC32K"; + #clock-cells = <0>; + }; + usb_vbus: regulator-usb-vbus { /* * Silergy SY6288CCAC-GP 2A Power Distribution Switch. @@ -347,6 +355,12 @@ clock-names = "clkin0"; }; +&rtc { + status = "okay"; + clocks = <&rtc32k_xtal>; + vdd-supply = <&vcc_rtc>; +}; + /* exposed through the pin headers labeled "URDUG1" on the top of the PCB */ &uart_AO { status = "okay"; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 3b0e0f8fbc23..f3ad9397f670 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -124,6 +124,14 @@ io-channels = <&saradc 8>; }; + rtc32k_xtal: rtc32k-xtal-clk { + /* X3 in the schematics */ + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "RTC32K"; + #clock-cells = <0>; + }; + vcc_1v8: regulator-vcc-1v8 { /* * RICHTEK RT9179 configured for a fixed output voltage of @@ -234,7 +242,59 @@ }; }; +&gpio { + gpio-line-names = /* Bank GPIOX */ + "J2 Header Pin 35", "J2 Header Pin 36", + "J2 Header Pin 32", "J2 Header Pin 31", + "J2 Header Pin 29", "J2 Header Pin 18", + "J2 Header Pin 22", "J2 Header Pin 16", + "J2 Header Pin 23", "J2 Header Pin 21", + "J2 Header Pin 19", "J2 Header Pin 33", + "J2 Header Pin 8", "J2 Header Pin 10", + "J2 Header Pin 15", "J2 Header Pin 13", + "J2 Header Pin 24", "J2 Header Pin 26", + /* Bank GPIOY */ + "Revision (upper)", "Revision (lower)", + "J2 Header Pin 7", "", "J2 Header Pin 12", + "J2 Header Pin 11", "", "", "", + "TFLASH_VDD_EN", "", "", + /* Bank GPIODV */ + "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL", + "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)", + "", + /* Bank GPIOH */ + "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL", + "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1", + "ETH_TXD0", "ETH_TXD3", "ETH_TXD2", + "ETH_RGMII_TX_CLK", + /* Bank CARD */ + "SD_DATA1 (SDB_D1)", "SD_DATA0 (SDB_D0)", + "SD_CLK", "SD_CMD", "SD_DATA3 (SDB_D3)", + "SD_DATA2 (SDB_D2)", "SD_CDN (SD_DET_N)", + /* Bank BOOT */ + "SDC_D0 (EMMC)", "SDC_D1 (EMMC)", + "SDC_D2 (EMMC)", "SDC_D3 (EMMC)", + "SDC_D4 (EMMC)", "SDC_D5 (EMMC)", + "SDC_D6 (EMMC)", "SDC_D7 (EMMC)", + "SDC_CLK (EMMC)", "SDC_RSTn (EMMC)", + "SDC_CMD (EMMC)", "BOOT_SEL", "", "", "", + "", "", "", "", + /* Bank DIF */ + "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV", + "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2", + "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT", + "ETH_MDC", "ETH_MDIO"; +}; + &gpio_ao { + gpio-line-names = "UART TX", "UART RX", "", + "TF_3V3N_1V8_EN", "USB_HUB_RST_N", + "USB_OTG_PWREN", "J7 Header Pin 2", + "IR_IN", "J7 Header Pin 4", + "J7 Header Pin 6", "J7 Header Pin 5", + "J7 Header Pin 7", "HDMI_CEC", + "SYS_LED", "", ""; + /* * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal * to be turned high in order to be detected by the USB Controller. @@ -293,6 +353,12 @@ clock-names = "clkin0"; }; +&rtc { + /* needs to be enabled manually when a battery is connected */ + clocks = <&rtc32k_xtal>; + vdd-supply = <&vdd_rtc>; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index fe84a8c3ce81..800cd65fc50a 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -294,6 +294,11 @@ status = "disabled"; }; + clock-measure@8758 { + compatible = "amlogic,meson8b-clk-measure"; + reg = <0x8758 0x1c>; + }; + pinctrl_cbus: pinctrl@9880 { compatible = "amlogic,meson8b-cbus-pinctrl"; reg = <0x9880 0x10>; @@ -505,6 +510,11 @@ compatible = "amlogic,meson8b-pwm"; }; +&rtc { + compatible = "amlogic,meson8b-rtc"; + resets = <&reset RESET_RTC>; +}; + &saradc { compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; clocks = <&clkc CLKID_XTAL>, diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts index 96b9913ecc1f..09c1dbc0bb69 100644 --- a/arch/arm/boot/dts/omap2420-n810.dts +++ b/arch/arm/boot/dts/omap2420-n810.dts @@ -48,7 +48,7 @@ pinctrl-names = "default"; pinctrl-0 = <&aic33_pins>; - gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */ + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */ ai3x-gpio-func = < 10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */ diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index 5e8169153414..a1dacb8a6987 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -7,6 +7,7 @@ */ #include "omap443x.dtsi" +#include "omap4-mcpdm.dtsi" / { model = "Gumstix Duovero"; @@ -82,16 +83,6 @@ >; }; - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - >; - }; - mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ @@ -210,16 +201,6 @@ status = "okay"; }; -&mcpdm { - pinctrl-names = "default"; - pinctrl-0 = <&mcpdm_pins>; - - clocks = <&twl6040>; - clock-names = "pdmclk"; - - status = "okay"; -}; - &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi new file mode 100644 index 000000000000..67072df39bc7 --- /dev/null +++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi @@ -0,0 +1,501 @@ +&l4_abe { /* 0x40100000 */ + compatible = "ti,omap4-l4-abe", "simple-bus"; + reg = <0x40100000 0x400>, + <0x40100400 0x400>; + reg-names = "la", "ap"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ + <0x49000000 0x49000000 0x100000>; + segment@0 { /* 0x40100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = + /* CPU to L4 ABE mapping */ + <0x00000000 0x00000000 0x000400>, /* ap 0 */ + <0x00000400 0x00000400 0x000400>, /* ap 1 */ + <0x00022000 0x00022000 0x001000>, /* ap 2 */ + <0x00023000 0x00023000 0x001000>, /* ap 3 */ + <0x00024000 0x00024000 0x001000>, /* ap 4 */ + <0x00025000 0x00025000 0x001000>, /* ap 5 */ + <0x00026000 0x00026000 0x001000>, /* ap 6 */ + <0x00027000 0x00027000 0x001000>, /* ap 7 */ + <0x00028000 0x00028000 0x001000>, /* ap 8 */ + <0x00029000 0x00029000 0x001000>, /* ap 9 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 10 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 11 */ + <0x0002e000 0x0002e000 0x001000>, /* ap 12 */ + <0x0002f000 0x0002f000 0x001000>, /* ap 13 */ + <0x00030000 0x00030000 0x001000>, /* ap 14 */ + <0x00031000 0x00031000 0x001000>, /* ap 15 */ + <0x00032000 0x00032000 0x001000>, /* ap 16 */ + <0x00033000 0x00033000 0x001000>, /* ap 17 */ + <0x00038000 0x00038000 0x001000>, /* ap 18 */ + <0x00039000 0x00039000 0x001000>, /* ap 19 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 20 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 21 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 22 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 23 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 24 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 25 */ + <0x00080000 0x00080000 0x010000>, /* ap 26 */ + <0x00080000 0x00080000 0x001000>, /* ap 27 */ + <0x000a0000 0x000a0000 0x010000>, /* ap 28 */ + <0x000a0000 0x000a0000 0x001000>, /* ap 29 */ + <0x000c0000 0x000c0000 0x010000>, /* ap 30 */ + <0x000c0000 0x000c0000 0x001000>, /* ap 31 */ + <0x000f1000 0x000f1000 0x001000>, /* ap 32 */ + <0x000f2000 0x000f2000 0x001000>, /* ap 33 */ + + /* L3 to L4 ABE mapping */ + <0x49000000 0x49000000 0x000400>, /* ap 0 */ + <0x49000400 0x49000400 0x000400>, /* ap 1 */ + <0x49022000 0x49022000 0x001000>, /* ap 2 */ + <0x49023000 0x49023000 0x001000>, /* ap 3 */ + <0x49024000 0x49024000 0x001000>, /* ap 4 */ + <0x49025000 0x49025000 0x001000>, /* ap 5 */ + <0x49026000 0x49026000 0x001000>, /* ap 6 */ + <0x49027000 0x49027000 0x001000>, /* ap 7 */ + <0x49028000 0x49028000 0x001000>, /* ap 8 */ + <0x49029000 0x49029000 0x001000>, /* ap 9 */ + <0x4902a000 0x4902a000 0x001000>, /* ap 10 */ + <0x4902b000 0x4902b000 0x001000>, /* ap 11 */ + <0x4902e000 0x4902e000 0x001000>, /* ap 12 */ + <0x4902f000 0x4902f000 0x001000>, /* ap 13 */ + <0x49030000 0x49030000 0x001000>, /* ap 14 */ + <0x49031000 0x49031000 0x001000>, /* ap 15 */ + <0x49032000 0x49032000 0x001000>, /* ap 16 */ + <0x49033000 0x49033000 0x001000>, /* ap 17 */ + <0x49038000 0x49038000 0x001000>, /* ap 18 */ + <0x49039000 0x49039000 0x001000>, /* ap 19 */ + <0x4903a000 0x4903a000 0x001000>, /* ap 20 */ + <0x4903b000 0x4903b000 0x001000>, /* ap 21 */ + <0x4903c000 0x4903c000 0x001000>, /* ap 22 */ + <0x4903d000 0x4903d000 0x001000>, /* ap 23 */ + <0x4903e000 0x4903e000 0x001000>, /* ap 24 */ + <0x4903f000 0x4903f000 0x001000>, /* ap 25 */ + <0x49080000 0x49080000 0x010000>, /* ap 26 */ + <0x49080000 0x49080000 0x001000>, /* ap 27 */ + <0x490a0000 0x490a0000 0x010000>, /* ap 28 */ + <0x490a0000 0x490a0000 0x001000>, /* ap 29 */ + <0x490c0000 0x490c0000 0x010000>, /* ap 30 */ + <0x490c0000 0x490c0000 0x001000>, /* ap 31 */ + <0x490f1000 0x490f1000 0x001000>, /* ap 32 */ + <0x490f2000 0x490f2000 0x001000>; /* ap 33 */ + + target-module@22000 { /* 0x40122000, ap 2 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp1"; + reg = <0x2208c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCBSP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>, + <0x49022000 0x49022000 0x1000>; + + mcbsp1: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@24000 { /* 0x40124000, ap 4 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp2"; + reg = <0x2408c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCBSP2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>, + <0x49024000 0x49024000 0x1000>; + + mcbsp2: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@26000 { /* 0x40126000, ap 6 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp3"; + reg = <0x2608c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCBSP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>, + <0x49026000 0x49026000 0x1000>; + + mcbsp3: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@28000 { /* 0x40128000, ap 8 08.0 */ + compatible = "ti,sysc-mcasp", "ti,sysc"; + ti,hwmods = "mcasp"; + reg = <0x28000 0x4>, + <0x28004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>, + <0x49028000 0x49028000 0x1000>; + + /* + * Child device unsupported by davinci-mcasp. At least + * RX path is disabled for omap4, and only DIT mode + * works with no I2S. See also old Android kernel + * omap-mcasp driver for more information. + */ + }; + + target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>, + <0x4902a000 0x4902a000 0x1000>; + }; + + target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "dmic"; + reg = <0x2e000 0x4>, + <0x2e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_DMIC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>, + <0x4902e000 0x4902e000 0x1000>; + + dmic: dmic@0 { + compatible = "ti,omap4-dmic"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 67>; + dma-names = "up_link"; + status = "disabled"; + }; + }; + + target-module@30000 { /* 0x40130000, ap 14 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer3"; + reg = <0x30000 0x4>, + <0x30010 0x4>, + <0x30014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>, + <0x49030000 0x49030000 0x1000>; + + wdt3: wdt@0 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcpdm"; + reg = <0x32000 0x4>, + <0x32010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_MCPDM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>, + <0x49032000 0x49032000 0x1000>; + + /* Must be only enabled for boards with pdmclk wired */ + status = "disabled"; + + mcpdm: mcpdm@0 { + compatible = "ti,omap4-mcpdm"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; + }; + }; + + target-module@38000 { /* 0x40138000, ap 18 12.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer5"; + reg = <0x38000 0x4>, + <0x38010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x1000>, + <0x49038000 0x49038000 0x1000>; + + timer5: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x49038000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3a000 { /* 0x4013a000, ap 20 14.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer6"; + reg = <0x3a000 0x4>, + <0x3a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>, + <0x4903a000 0x4903a000 0x1000>; + + timer6: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x4903a000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3c000 { /* 0x4013c000, ap 22 16.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer7"; + reg = <0x3c000 0x4>, + <0x3c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>, + <0x4903c000 0x4903c000 0x1000>; + + timer7: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x4903c000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3e000 { /* 0x4013e000, ap 24 18.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer8"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>, + <0x4903e000 0x4903e000 0x1000>; + + timer8: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x00000000 0x80>, + <0x4903e000 0x80>; + clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + ti,timer-dsp; + }; + }; + + target-module@80000 { /* 0x40180000, ap 26 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>, + <0x49080000 0x49080000 0x10000>; + }; + + target-module@a0000 { /* 0x401a0000, ap 28 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x10000>, + <0x490a0000 0x490a0000 0x10000>; + }; + + target-module@c0000 { /* 0x401c0000, ap 30 1e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000 0x10000>, + <0x490c0000 0x490c0000 0x10000>; + }; + + target-module@f1000 { /* 0x401f1000, ap 32 20.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "aess"; + reg = <0xf1000 0x4>, + <0xf1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf1000 0x1000>, + <0x490f1000 0x490f1000 0x1000>; + + /* + * No child device binding or driver in mainline. + * See Android tree and related upstreaming efforts + * for the old driver. + */ + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap4-mcpdm.dtsi b/arch/arm/boot/dts/omap4-mcpdm.dtsi new file mode 100644 index 000000000000..915a9b31a33b --- /dev/null +++ b/arch/arm/boot/dts/omap4-mcpdm.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common omap4 mcpdm configuration + * + * Only include this file if your board has pdmclk wired from the + * pmic to ABE as mcpdm uses an external clock for the module. + */ + +&omap4_pmx_core { + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + /* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */ + OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) + + /* 0x4a100108 abe_pdm_dl_data.abe_pdm_dl_data af25 */ + OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) + + /* 0x4a10010a abe_pdm_frame.abe_pdm_frame ae25 */ + OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) + + /* 0x4a10010c abe_pdm_lb_clk.abe_pdm_lb_clk af26 */ + OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) + + /* 0x4a10010e abe_clks.abe_clks ah26 */ + OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; +}; + +&mcpdm_module { + /* + * McPDM pads must be muxed at the interconnect target module + * level as the module on the SoC needs external clock from + * the PMIC + */ + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&mcpdm { + clocks = <&twl6040>; + clock-names = "pdmclk"; +}; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 926f018823a4..68e1894df713 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -7,6 +7,7 @@ */ #include <dt-bindings/input/input.h> #include "elpida_ecb240abacn.dtsi" +#include "omap4-mcpdm.dtsi" / { memory@80000000 { @@ -226,16 +227,6 @@ >; }; - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - >; - }; - mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ @@ -509,16 +500,6 @@ status = "okay"; }; -&mcpdm { - pinctrl-names = "default"; - pinctrl-0 = <&mcpdm_pins>; - - clocks = <&twl6040>; - clock-names = "pdmclk"; - - status = "okay"; -}; - &twl_usb_comparator { usb-supply = <&vusb>; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index c88817bdcc56..fb51a4bffd35 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -9,6 +9,7 @@ #include "omap443x.dtsi" #include "elpida_ecb240abacn.dtsi" +#include "omap4-mcpdm.dtsi" / { model = "TI OMAP4 SDP board"; @@ -246,16 +247,6 @@ >; }; - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - >; - }; - dmic_pins: pinmux_dmic_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */ @@ -649,16 +640,6 @@ status = "okay"; }; -&mcpdm { - pinctrl-names = "default"; - pinctrl-0 = <&mcpdm_pins>; - - clocks = <&twl6040>; - clock-names = "pdmclk"; - - status = "okay"; -}; - &twl_usb_comparator { usb-supply = <&vusb>; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 10fce28ceb5b..9562d372077c 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -7,6 +7,7 @@ * published by the Free Software Foundation. */ #include "omap4460.dtsi" +#include "omap4-mcpdm.dtsi" / { model = "Variscite VAR-SOM-OM44"; @@ -74,16 +75,6 @@ >; }; - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - >; - }; - tsc2004_pins: pinmux_tsc2004_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3) /* gpmc_ncs4.gpio_101 (irq) */ @@ -251,16 +242,6 @@ status = "disabled"; }; -&mcpdm { - pinctrl-names = "default"; - pinctrl-0 = <&mcpdm_pins>; - - clocks = <&twl6040>; - clock-names = "pdmclk"; - - status = "okay"; -}; - &gpmc { status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 1a96d4317c97..442a737f35fe 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -148,6 +148,9 @@ l4_per: interconnect@48000000 { }; + l4_abe: interconnect@40100000 { + }; + ocmcram: ocmcram@40304000 { compatible = "mmio-sram"; reg = <0x40304000 0xa000>; /* 40k */ @@ -214,130 +217,6 @@ #iommu-cells = <0>; ti,iommu-bus-err-back; }; - target-module@40130000 { - compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "wd_timer3"; - reg = <0x40130000 0x4>, - <0x40130010 0x4>, - <0x40130014 0x4>; - reg-names = "rev", "sysc", "syss"; - ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | - SYSC_OMAP2_SOFTRESET)>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,syss-mask = <1>; - /* Domains (V, P, C): abe, abe_pwrdm, abe_clkdm */ - clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00000000 0x40130000 0x1000>, /* MPU private access */ - <0x49030000 0x49030000 0x0080>; /* L3 Interconnect */ - - wdt3: wdt@0 { - compatible = "ti,omap4-wdt", "ti,omap3-wdt"; - reg = <0x0 0x80>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - mcpdm: mcpdm@40132000 { - compatible = "ti,omap4-mcpdm"; - reg = <0x40132000 0x7f>, /* MPU private access */ - <0x49032000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mcpdm"; - dmas = <&sdma 65>, - <&sdma 66>; - dma-names = "up_link", "dn_link"; - status = "disabled"; - }; - - dmic: dmic@4012e000 { - compatible = "ti,omap4-dmic"; - reg = <0x4012e000 0x7f>, /* MPU private access */ - <0x4902e000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dmic"; - dmas = <&sdma 67>; - dma-names = "up_link"; - status = "disabled"; - }; - - mcbsp1: mcbsp@40122000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40122000 0xff>, /* MPU private access */ - <0x49022000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp1"; - dmas = <&sdma 33>, - <&sdma 34>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - mcbsp2: mcbsp@40124000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40124000 0xff>, /* MPU private access */ - <0x49024000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp2"; - dmas = <&sdma 17>, - <&sdma 18>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - mcbsp3: mcbsp@40126000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40126000 0xff>, /* MPU private access */ - <0x49026000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; - dmas = <&sdma 19>, - <&sdma 20>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - target-module@40128000 { - compatible = "ti,sysc-mcasp", "ti,sysc"; - ti,hwmods = "mcasp"; - reg = <0x40128000 0x4>, - <0x40128004 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00000000 0x40128000 0x1000>, /* MPU */ - <0x49028000 0x49028000 0x1000>; /* L3 */ - - /* - * Child device unsupported by davinci-mcasp. At least - * RX path is disabled for omap4, and only DIT mode - * works with no I2S. See also old Android kernel - * omap-mcasp driver for more information. - */ - }; - target-module@4012c000 { compatible = "ti,sysc-omap4", "ti,sysc"; ti,hwmods = "slimbus1"; @@ -359,33 +238,6 @@ /* No child device binding or driver in mainline */ }; - target-module@401f1000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "aess"; - reg = <0x401f1000 0x4>, - <0x401f1010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00000000 0x401f1000 0x1000>, /* MPU */ - <0x490f1000 0x490f1000 0x1000>; /* L3 */ - - /* - * No child device binding or driver in mainline. - * See Android tree and related upstreaming efforts - * for the old driver. - */ - }; - dmm@4e000000 { compatible = "ti,omap4-dmm"; reg = <0x4e000000 0x800>; @@ -417,43 +269,6 @@ hw-caps-temp-alert; }; - timer5: timer@40138000 { - compatible = "ti,omap4430-timer"; - reg = <0x40138000 0x80>, - <0x49038000 0x80>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer5"; - ti,timer-dsp; - }; - - timer6: timer@4013a000 { - compatible = "ti,omap4430-timer"; - reg = <0x4013a000 0x80>, - <0x4903a000 0x80>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer6"; - ti,timer-dsp; - }; - - timer7: timer@4013c000 { - compatible = "ti,omap4430-timer"; - reg = <0x4013c000 0x80>, - <0x4903c000 0x80>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer7"; - ti,timer-dsp; - }; - - timer8: timer@4013e000 { - compatible = "ti,omap4430-timer"; - reg = <0x4013e000 0x80>, - <0x4903e000 0x80>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer8"; - ti,timer-pwm; - ti,timer-dsp; - }; - aes1: aes@4b501000 { compatible = "ti,omap4-aes"; ti,hwmods = "aes1"; @@ -629,4 +444,5 @@ }; #include "omap4-l4.dtsi" +#include "omap4-l4-abe.dtsi" #include "omap44xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 61a06f6add3c..2dc3e1950c96 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -667,14 +667,16 @@ }; }; -&mcpdm { +&mcpdm_module { + /* Module on the SoC needs external clock from the PMIC */ pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; +&mcpdm { clocks = <&twl6040>; clock-names = "pdmclk"; - - status = "okay"; }; &mcbsp1 { diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi new file mode 100644 index 000000000000..dc9d0532f4cf --- /dev/null +++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi @@ -0,0 +1,447 @@ +&l4_abe { /* 0x40100000 */ + compatible = "ti,omap5-l4-abe", "simple-bus"; + reg = <0x40100000 0x400>, + <0x40100400 0x400>; + reg-names = "la", "ap"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ + <0x49000000 0x49000000 0x100000>; + segment@0 { /* 0x40100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = + /* CPU to L4 ABE mapping */ + <0x00000000 0x00000000 0x000400>, /* ap 0 */ + <0x00000400 0x00000400 0x000400>, /* ap 1 */ + <0x00022000 0x00022000 0x001000>, /* ap 2 */ + <0x00023000 0x00023000 0x001000>, /* ap 3 */ + <0x00024000 0x00024000 0x001000>, /* ap 4 */ + <0x00025000 0x00025000 0x001000>, /* ap 5 */ + <0x00026000 0x00026000 0x001000>, /* ap 6 */ + <0x00027000 0x00027000 0x001000>, /* ap 7 */ + <0x00028000 0x00028000 0x001000>, /* ap 8 */ + <0x00029000 0x00029000 0x001000>, /* ap 9 */ + <0x0002a000 0x0002a000 0x001000>, /* ap 10 */ + <0x0002b000 0x0002b000 0x001000>, /* ap 11 */ + <0x0002e000 0x0002e000 0x001000>, /* ap 12 */ + <0x0002f000 0x0002f000 0x001000>, /* ap 13 */ + <0x00030000 0x00030000 0x001000>, /* ap 14 */ + <0x00031000 0x00031000 0x001000>, /* ap 15 */ + <0x00032000 0x00032000 0x001000>, /* ap 16 */ + <0x00033000 0x00033000 0x001000>, /* ap 17 */ + <0x00038000 0x00038000 0x001000>, /* ap 18 */ + <0x00039000 0x00039000 0x001000>, /* ap 19 */ + <0x0003a000 0x0003a000 0x001000>, /* ap 20 */ + <0x0003b000 0x0003b000 0x001000>, /* ap 21 */ + <0x0003c000 0x0003c000 0x001000>, /* ap 22 */ + <0x0003d000 0x0003d000 0x001000>, /* ap 23 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 24 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 25 */ + <0x00080000 0x00080000 0x010000>, /* ap 26 */ + <0x00080000 0x00080000 0x001000>, /* ap 27 */ + <0x000a0000 0x000a0000 0x010000>, /* ap 28 */ + <0x000a0000 0x000a0000 0x001000>, /* ap 29 */ + <0x000c0000 0x000c0000 0x010000>, /* ap 30 */ + <0x000c0000 0x000c0000 0x001000>, /* ap 31 */ + <0x000f1000 0x000f1000 0x001000>, /* ap 32 */ + <0x000f2000 0x000f2000 0x001000>, /* ap 33 */ + + /* L3 to L4 ABE mapping */ + <0x49000000 0x49000000 0x000400>, /* ap 0 */ + <0x49000400 0x49000400 0x000400>, /* ap 1 */ + <0x49022000 0x49022000 0x001000>, /* ap 2 */ + <0x49023000 0x49023000 0x001000>, /* ap 3 */ + <0x49024000 0x49024000 0x001000>, /* ap 4 */ + <0x49025000 0x49025000 0x001000>, /* ap 5 */ + <0x49026000 0x49026000 0x001000>, /* ap 6 */ + <0x49027000 0x49027000 0x001000>, /* ap 7 */ + <0x49028000 0x49028000 0x001000>, /* ap 8 */ + <0x49029000 0x49029000 0x001000>, /* ap 9 */ + <0x4902a000 0x4902a000 0x001000>, /* ap 10 */ + <0x4902b000 0x4902b000 0x001000>, /* ap 11 */ + <0x4902e000 0x4902e000 0x001000>, /* ap 12 */ + <0x4902f000 0x4902f000 0x001000>, /* ap 13 */ + <0x49030000 0x49030000 0x001000>, /* ap 14 */ + <0x49031000 0x49031000 0x001000>, /* ap 15 */ + <0x49032000 0x49032000 0x001000>, /* ap 16 */ + <0x49033000 0x49033000 0x001000>, /* ap 17 */ + <0x49038000 0x49038000 0x001000>, /* ap 18 */ + <0x49039000 0x49039000 0x001000>, /* ap 19 */ + <0x4903a000 0x4903a000 0x001000>, /* ap 20 */ + <0x4903b000 0x4903b000 0x001000>, /* ap 21 */ + <0x4903c000 0x4903c000 0x001000>, /* ap 22 */ + <0x4903d000 0x4903d000 0x001000>, /* ap 23 */ + <0x4903e000 0x4903e000 0x001000>, /* ap 24 */ + <0x4903f000 0x4903f000 0x001000>, /* ap 25 */ + <0x49080000 0x49080000 0x010000>, /* ap 26 */ + <0x49080000 0x49080000 0x001000>, /* ap 27 */ + <0x490a0000 0x490a0000 0x010000>, /* ap 28 */ + <0x490a0000 0x490a0000 0x001000>, /* ap 29 */ + <0x490c0000 0x490c0000 0x010000>, /* ap 30 */ + <0x490c0000 0x490c0000 0x001000>, /* ap 31 */ + <0x490f1000 0x490f1000 0x001000>, /* ap 32 */ + <0x490f2000 0x490f2000 0x001000>; /* ap 33 */ + + target-module@22000 { /* 0x40122000, ap 2 02.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp1"; + reg = <0x2208c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCBSP1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x22000 0x1000>, + <0x49022000 0x49022000 0x1000>; + + mcbsp1: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@24000 { /* 0x40124000, ap 4 04.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp2"; + reg = <0x2408c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCBSP2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>, + <0x49024000 0x49024000 0x1000>; + + mcbsp2: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@26000 { /* 0x40126000, ap 6 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp3"; + reg = <0x2608c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCBSP3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>, + <0x49026000 0x49026000 0x1000>; + + mcbsp3: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@28000 { /* 0x40128000, ap 8 08.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>, + <0x49028000 0x49028000 0x1000>; + }; + + target-module@2a000 { /* 0x4012a000, ap 10 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>, + <0x4902a000 0x4902a000 0x1000>; + }; + + target-module@2e000 { /* 0x4012e000, ap 12 0c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "dmic"; + reg = <0x2e000 0x4>, + <0x2e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_DMIC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>, + <0x4902e000 0x4902e000 0x1000>; + + dmic: dmic@0 { + compatible = "ti,omap4-dmic"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 67>; + dma-names = "up_link"; + status = "disabled"; + }; + }; + + target-module@30000 { /* 0x40130000, ap 14 0e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x1000>, + <0x49030000 0x49030000 0x1000>; + }; + + mcpdm_module: target-module@32000 { /* 0x40132000, ap 16 10.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcpdm"; + reg = <0x32000 0x4>, + <0x32010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_MCPDM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>, + <0x49032000 0x49032000 0x1000>; + + /* Must be only enabled for boards with pdmclk wired */ + status = "disabled"; + + mcpdm: mcpdm@0 { + compatible = "ti,omap4-mcpdm"; + reg = <0x0 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; + }; + }; + + target-module@38000 { /* 0x40138000, ap 18 12.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer5"; + reg = <0x38000 0x4>, + <0x38010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x38000 0x1000>, + <0x49038000 0x49038000 0x1000>; + + timer5: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x49038000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + ti,timer-pwm; + }; + }; + + target-module@3a000 { /* 0x4013a000, ap 20 14.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer6"; + reg = <0x3a000 0x4>, + <0x3a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3a000 0x1000>, + <0x4903a000 0x4903a000 0x1000>; + + timer6: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x4903a000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + ti,timer-pwm; + }; + }; + + target-module@3c000 { /* 0x4013c000, ap 22 16.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer7"; + reg = <0x3c000 0x4>, + <0x3c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3c000 0x1000>, + <0x4903c000 0x4903c000 0x1000>; + + timer7: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x4903c000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + }; + }; + + target-module@3e000 { /* 0x4013e000, ap 24 18.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer8"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>, + <0x4903e000 0x4903e000 0x1000>; + + timer8: timer@0 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x80>, + <0x4903e000 0x80>; + clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-dsp; + ti,timer-pwm; + }; + }; + + target-module@80000 { /* 0x40180000, ap 26 1a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>, + <0x49080000 0x49080000 0x10000>; + }; + + target-module@a0000 { /* 0x401a0000, ap 28 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa0000 0x10000>, + <0x490a0000 0x490a0000 0x10000>; + }; + + target-module@c0000 { /* 0x401c0000, ap 30 1e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc0000 0x10000>, + <0x490c0000 0x490c0000 0x10000>; + }; + + target-module@f1000 { /* 0x401f1000, ap 32 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf1000 0x1000>, + <0x490f1000 0x490f1000 0x1000>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 2fefaafdf901..4b40e4748649 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -161,6 +161,9 @@ l4_per: interconnect@48000000 { }; + l4_abe: interconnect@40100000 { + }; + ocmcram: ocmcram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x20000>; /* 128k */ @@ -202,115 +205,6 @@ ti,iommu-bus-err-back; }; - mcpdm: mcpdm@40132000 { - compatible = "ti,omap4-mcpdm"; - reg = <0x40132000 0x7f>, /* MPU private access */ - <0x49032000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mcpdm"; - dmas = <&sdma 65>, - <&sdma 66>; - dma-names = "up_link", "dn_link"; - status = "disabled"; - }; - - dmic: dmic@4012e000 { - compatible = "ti,omap4-dmic"; - reg = <0x4012e000 0x7f>, /* MPU private access */ - <0x4902e000 0x7f>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dmic"; - dmas = <&sdma 67>; - dma-names = "up_link"; - status = "disabled"; - }; - - mcbsp1: mcbsp@40122000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40122000 0xff>, /* MPU private access */ - <0x49022000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp1"; - dmas = <&sdma 33>, - <&sdma 34>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - mcbsp2: mcbsp@40124000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40124000 0xff>, /* MPU private access */ - <0x49024000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp2"; - dmas = <&sdma 17>, - <&sdma 18>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - mcbsp3: mcbsp@40126000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x40126000 0xff>, /* MPU private access */ - <0x49026000 0xff>; /* L3 Interconnect */ - reg-names = "mpu", "dma"; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; - dmas = <&sdma 19>, - <&sdma 20>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - timer5: timer@40138000 { - compatible = "ti,omap5430-timer"; - reg = <0x40138000 0x80>, - <0x49038000 0x80>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer5"; - ti,timer-dsp; - ti,timer-pwm; - }; - - timer6: timer@4013a000 { - compatible = "ti,omap5430-timer"; - reg = <0x4013a000 0x80>, - <0x4903a000 0x80>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer6"; - ti,timer-dsp; - ti,timer-pwm; - }; - - timer7: timer@4013c000 { - compatible = "ti,omap5430-timer"; - reg = <0x4013c000 0x80>, - <0x4903c000 0x80>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer7"; - ti,timer-dsp; - }; - - timer8: timer@4013e000 { - compatible = "ti,omap5430-timer"; - reg = <0x4013e000 0x80>, - <0x4903e000 0x80>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer8"; - ti,timer-dsp; - ti,timer-pwm; - }; - dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; @@ -517,3 +411,6 @@ &core_thermal { coefficients = <0 2000>; }; + +#include "omap5-l4-abe.dtsi" +#include "omap54xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index bd6907db615b..65975df6a8c3 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -714,6 +714,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-controller; + gpio-ranges = <&pm8921_gpio 0 0 44>; #gpio-cells = <2>; }; @@ -1302,8 +1303,9 @@ <0x04700300 0x200>, <0x04700500 0x5c>; reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator"; - clock-names = "iface_clk"; - clocks = <&mmcc DSI_M_AHB_CLK>; + clock-names = "iface_clk", "ref"; + clocks = <&mmcc DSI_M_AHB_CLK>, + <&cxo_board>; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 9e75f97770ce..1008dfbcb972 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -400,8 +400,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 - 0x82000000 0 0x40300000 0x40300000 0 0x400000>; + ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, + <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 02afc6a42005..356e9535f7a6 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -326,6 +326,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-controller; + gpio-ranges = <&pmicgpio 0 0 6>; #gpio-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 65a994f0e09b..ec5cbc468bd3 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -295,6 +295,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-controller; + gpio-ranges = <&pm8058_gpio 0 0 44>; #gpio-cells = <2>; }; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index 8f5ea7add20f..ea1ca166165c 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -31,6 +31,7 @@ compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pma8084_gpios 0 0 22>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index 8ee44a100e9a..ff24301dc1be 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -34,12 +34,23 @@ }; leds { - status = "okay"; compatible = "gpio-leds"; led0 { gpios = <&port7 1 GPIO_ACTIVE_LOW>; }; + + led1 { + gpios = <&io_expander1 0 GPIO_ACTIVE_LOW>; + }; + + led2 { + gpios = <&io_expander1 1 GPIO_ACTIVE_LOW>; + }; + + led3 { + gpios = <&io_expander1 2 GPIO_ACTIVE_LOW>; + }; }; }; @@ -47,6 +58,34 @@ clock-frequency = <13330000>; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + + clock-frequency = <400000>; + + io_expander1: gpio@20 { + compatible = "onnn,cat9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + io_expander2: gpio@21 { + compatible = "onnn,cat9554"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "renesas,r1ex24016", "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &usb_x1_clk { clock-frequency = <48000000>; }; @@ -56,6 +95,11 @@ }; &pinctrl { + /* RIIC ch3 (Port Expander, EEPROM (MAC Addr), Audio Codec) */ + i2c3_pins: i2c3 { + pinmux = <RZA1_PINMUX(1, 6, 1)>, /* RIIC3SCL */ + <RZA1_PINMUX(1, 7, 1)>; /* RIIC3SDA */ + }; /* Serial Console */ scif2_pins: serial2 { diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index d530f451467e..f70f4a3e5c43 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -166,6 +166,33 @@ }; &bsc { + flash@0 { + compatible = "cfi-flash", "mtd-rom"; + reg = <0x0 0x08000000>; + bank-width = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "uboot-env"; + reg = <0x00040000 0x00040000>; + read-only; + }; + partition@80000 { + label = "flash"; + reg = <0x00080000 0x07f80000>; + }; + }; + }; + ethernet@8000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x08000000 0x1000>; diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts index 77d18242ef59..2840eb0d6fd4 100644 --- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts @@ -22,6 +22,17 @@ stdout-path = "serial1:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + memory@40000000 { device_type = "memory"; reg = <0 0x40000000 0 0x20000000>; @@ -80,10 +91,42 @@ status = "okay"; }; +&du { + pinctrl-0 = <&du0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; +}; + +&ehci1 { + status = "okay"; +}; + &extal_clk { clock-frequency = <20000000>; }; +&gpio2 { + interrupt-fixup { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; + line-name = "hdmi-hpd-int"; + input; + }; +}; + +&hsusb0 { + status = "okay"; +}; + &i2c3 { pinctrl-0 = <&i2c3_pins>; pinctrl-names = "default"; @@ -97,12 +140,60 @@ }; }; +&i2c4 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <100000>; + + hdmi@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + interrupt-parent = <&gpio2>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + bridge_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&ohci1 { + status = "okay"; +}; + &pfc { avb_pins: avb { groups = "avb_mdio", "avb_gmii_tx_rx"; function = "avb"; }; + du0_pins: du0 { + groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out"; + function = "du0"; + }; + + i2c4_pins: i2c4 { + groups = "i2c4_e"; + function = "i2c4"; + }; + i2c3_pins: i2c3 { groups = "i2c3_c"; function = "i2c3"; @@ -135,6 +226,16 @@ function = "sdhi2"; power-source = <1800>; }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; }; &qspi0 { @@ -195,3 +296,25 @@ sd-uhs-sdr50; status = "okay"; }; + +&usb2_phy0 { + status = "okay"; +}; + +&usb2_phy1 { + status = "okay"; +}; + +&usbphy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usbphy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index f4e232bf9d03..56cb10b42ed9 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -325,6 +325,77 @@ status = "disabled"; }; + hsusb0: hsusb@e6590000 { + compatible = "renesas,usbhs-r8a77470", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac00 0>, <&usb_dmac00 1>, + <&usb_dmac10 0>, <&usb_dmac10 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + }; + + usbphy0: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a77470", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + }; + + hsusb1: hsusb@e6598000 { + compatible = "renesas,usbhs-r8a77470", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6598000 0 0x100>; + interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 706>; + dmas = <&usb_dmac01 0>, <&usb_dmac01 1>, + <&usb_dmac11 0>, <&usb_dmac11 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <4>; + /* We need to turn on usbphy0 to make usbphy1 to work */ + phys = <&usb1 1>; + phy-names = "usb"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 706>; + status = "disabled"; + }; + + usbphy1: usb-phy@e6598100 { + compatible = "renesas,usb-phy-r8a77470", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6598100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 706>; + clock-names = "usbhs"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 706>; + status = "disabled"; + + usb1: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + }; + usb_dmac00: dma-controller@e65a0000 { compatible = "renesas,r8a77470-usb-dmac", "renesas,usb-dmac"; @@ -588,6 +659,216 @@ status = "disabled"; }; + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a77470", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a77470", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a77470", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 0x60>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 713>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a77470", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a77470", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb0 0>, <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb0 0>, <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a77470"; + reg = <0 0xee080200 0 0x700>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; + }; + + ohci1: usb@ee0c0000 { + compatible = "generic-ohci"; + reg = <0 0xee0c0000 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 705>; + phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>; + phy-names = "usb"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 705>; + status = "disabled"; + }; + + ehci1: usb@ee0c0100 { + compatible = "generic-ehci"; + reg = <0 0xee0c0100 0 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 705>; + phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 705>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@ee0c0200 { + compatible = "renesas,usb2-phy-r8a77470"; + reg = <0 0xee0c0200 0 0x700>; + clocks = <&cpg CPG_MOD 705>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 705>; + #phy-cells = <0>; + status = "disabled"; + }; + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a77470", "renesas,rcar-gen2-sdhi"; @@ -643,6 +924,38 @@ resets = <&cpg 408>; }; + du: display@feb00000 { + compatible = "renesas,du-r8a77470"; + reg = <0 0xfeb00000 0 0x40000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb0: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_rgb1: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + prr: chipid@ff000044 { compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index cecb22924ec4..0b49956069fc 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -25,7 +25,7 @@ }; chosen { - bootargs = "ignore_loglevel ip=dhcp root=/dev/nfs rw"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index abc14e7a4c93..d4bee1ec9044 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "ignore_loglevel root=/dev/nfs ip=on"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index f92301290b02..b6fa80c3b07e 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -308,6 +308,26 @@ }; }; +&iic3 { + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; +}; + &du { pinctrl-0 = <&du0_pins &du1_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 8e9eb4b704d3..38fb43d11b27 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -22,6 +22,7 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &iic3; spi0 = &qspi; spi1 = &msiof0; spi2 = &msiof1; @@ -444,6 +445,23 @@ status = "disabled"; }; + iic3: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7792", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7792", "renesas,rcar-dmac"; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index ef7e2a837df6..0ab3d8d57f6d 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -199,6 +199,22 @@ }; }; +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&usbphy { + status = "okay"; +}; + &du { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; @@ -293,6 +309,16 @@ function = "sdhi1"; power-source = <1800>; }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; }; &cmt0 { @@ -377,6 +403,27 @@ pinctrl-names = "i2c-exio4"; }; +&i2c7 { + status = "okay"; + clock-frequency = <100000>; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; +}; + &vin0 { status = "okay"; pinctrl-0 = <&vin0_pins>; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 0173eb11ec28..fb3cf005cc90 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -368,31 +368,31 @@ &pinctrl { leds { led_ctl: led-ctl { - rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>; }; }; sdio { bt_wake_h: bt-wake-h { - rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_default>; }; }; sdmmc { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sleep { global_pwroff: global-pwroff { - rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 59c90863b0e7..0290ea4edd32 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -551,71 +551,71 @@ pwm0 { pwm0_pin: pwm0-pin { - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { - rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>; }; }; pwm2 { pwm2_pin: pwm2-pin { - rockchip,pins = <0 1 2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>; }; }; pwm3 { pwm3_pin: pwm3-pin { - rockchip,pins = <0 27 1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>; }; }; sdmmc { sdmmc_clk: sdmmc-clk { - rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>; }; sdmmc_cd: sdmmc-cd { - rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>; }; sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>; }; sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>, - <1 19 RK_FUNC_1 &pcfg_pull_default>, - <1 20 RK_FUNC_1 &pcfg_pull_default>, - <1 21 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>, + <1 RK_PC3 1 &pcfg_pull_default>, + <1 RK_PC4 1 &pcfg_pull_default>, + <1 RK_PC5 1 &pcfg_pull_default>; }; }; sdio { sdio_bus1: sdio-bus1 { - rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>; }; sdio_bus4: sdio-bus4 { - rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>, - <0 12 RK_FUNC_1 &pcfg_pull_default>, - <0 13 RK_FUNC_1 &pcfg_pull_default>, - <0 14 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>, + <0 RK_PB4 1 &pcfg_pull_default>, + <0 RK_PB5 1 &pcfg_pull_default>, + <0 RK_PB6 1 &pcfg_pull_default>; }; sdio_cmd: sdio-cmd { - rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PB0 1 &pcfg_pull_default>; }; sdio_clk: sdio-clk { - rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none>; }; }; @@ -625,135 +625,135 @@ * We also have external pulls, so disable the internal ones. */ emmc_clk: emmc-clk { - rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PA1 2 &pcfg_pull_default>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>, - <1 25 RK_FUNC_2 &pcfg_pull_default>, - <1 26 RK_FUNC_2 &pcfg_pull_default>, - <1 27 RK_FUNC_2 &pcfg_pull_default>, - <1 28 RK_FUNC_2 &pcfg_pull_default>, - <1 29 RK_FUNC_2 &pcfg_pull_default>, - <1 30 RK_FUNC_2 &pcfg_pull_default>, - <1 31 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>, + <1 RK_PD1 2 &pcfg_pull_default>, + <1 RK_PD2 2 &pcfg_pull_default>, + <1 RK_PD3 2 &pcfg_pull_default>, + <1 RK_PD4 2 &pcfg_pull_default>, + <1 RK_PD5 2 &pcfg_pull_default>, + <1 RK_PD6 2 &pcfg_pull_default>, + <1 RK_PD7 2 &pcfg_pull_default>; }; }; emac { emac_xfer: emac-xfer { - rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */ - <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */ - <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */ - <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */ - <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */ - <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */ - <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */ - <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */ + rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */ + <2 RK_PB5 1 &pcfg_pull_default>, /* tx_en */ + <2 RK_PB6 1 &pcfg_pull_default>, /* mac_clk */ + <2 RK_PB7 1 &pcfg_pull_default>, /* rx_err */ + <2 RK_PC0 1 &pcfg_pull_default>, /* rxd1 */ + <2 RK_PC1 1 &pcfg_pull_default>, /* rxd0 */ + <2 RK_PC2 1 &pcfg_pull_default>, /* txd1 */ + <2 RK_PC3 1 &pcfg_pull_default>; /* txd0 */ }; emac_mdio: emac-mdio { - rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */ - <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */ + rockchip,pins = <2 RK_PB4 1 &pcfg_pull_default>, /* mac_md */ + <2 RK_PD1 1 &pcfg_pull_default>; /* mac_mdclk */ }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, - <0 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>, + <0 RK_PA1 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, - <0 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>, + <0 RK_PA3 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>, - <2 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>, + <2 RK_PC5 1 &pcfg_pull_none>; }; }; i2s { i2s_bus: i2s-bus { - rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>, - <1 1 RK_FUNC_1 &pcfg_pull_default>, - <1 2 RK_FUNC_1 &pcfg_pull_default>, - <1 3 RK_FUNC_1 &pcfg_pull_default>, - <1 4 RK_FUNC_1 &pcfg_pull_default>, - <1 5 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>, + <1 RK_PA1 1 &pcfg_pull_default>, + <1 RK_PA2 1 &pcfg_pull_default>, + <1 RK_PA3 1 &pcfg_pull_default>, + <1 RK_PA4 1 &pcfg_pull_default>, + <1 RK_PA5 1 &pcfg_pull_default>; }; }; hdmi { hdmi_ctl: hdmi-ctl { - rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>, - <1 9 RK_FUNC_1 &pcfg_pull_none>, - <1 10 RK_FUNC_1 &pcfg_pull_none>, - <1 11 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, + <1 RK_PB1 1 &pcfg_pull_none>, + <1 RK_PB2 1 &pcfg_pull_none>, + <1 RK_PB3 1 &pcfg_pull_none>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>, - <0 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>, + <0 RK_PC1 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PC2 1 &pcfg_pull_default>; }; uart0_rts: uart0-rts { - rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>, - <2 23 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC6 1 &pcfg_pull_default>, + <2 RK_PC7 1 &pcfg_pull_none>; }; /* no rts / cts for uart1 */ }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>, - <1 19 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>, + <1 RK_PC3 2 &pcfg_pull_none>; }; /* no rts / cts for uart2 */ }; spi-pins { spi_txd:spi-txd { - rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>; + rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>; }; spi_rxd:spi-rxd { - rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>; + rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>; }; spi_clk:spi-clk { - rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>; }; spi_cs0:spi-cs0 { - rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>; + rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>; }; spi_cs1:spi-cs1 { - rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>; + rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>; }; }; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index ce525b956ae5..7e01f6406a86 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -168,7 +168,7 @@ &pinctrl { lan8720a { phy_int: phy-int { - rockchip,pins = <RK_GPIO1 26 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 9d2216d71f70..365eff621113 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -30,6 +30,17 @@ }; }; + hdmi_con { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + vcc_io: vcc-io { compatible = "regulator-fixed"; regulator-name = "vcc_io"; @@ -91,6 +102,20 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_in_vop1 { + status = "disabled"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { bus-width = <4>; cap-mmc-highspeed; @@ -111,25 +136,25 @@ &pinctrl { usb-host { host_drv: host-drv { - rockchip,pins = <RK_GPIO0 6 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>; }; }; usb-otg { otg_drv: otg-drv { - rockchip,pins = <RK_GPIO0 5 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>; }; }; sdmmc { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <RK_GPIO3 7 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>; }; }; sdio { wifi_pwr: wifi-pwr { - rockchip,pins = <RK_GPIO3 24 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; @@ -150,6 +175,10 @@ status = "okay"; }; +&vop0 { + status = "okay"; +}; + &wdt { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 949fa800582d..f9db6bb9fa11 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -322,71 +322,71 @@ ak8963 { comp_int: comp-int { - rockchip,pins = <4 17 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_default>; }; }; emac { rmii_rst: rmii-rst { - rockchip,pins = <1 30 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_output_high>; }; }; ir { ir_int: ir-int { - rockchip,pins = <6 1 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <6 RK_PA1 RK_FUNC_GPIO &pcfg_pull_default>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <6 2 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <6 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>; }; }; mma8452 { gsensor_int: gsensor-int { - rockchip,pins = <4 16 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_default>; }; }; mmc { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <3 7 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>; }; }; usb_host { host_drv: host-drv { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>; }; hub_rst: hub-rst { - rockchip,pins = <1 31 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_output_high>; }; sata_pwr: sata-pwr { - rockchip,pins = <4 22 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_default>; }; sata_reset: sata-reset { - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>; }; }; usb_otg { otg_drv: otg-drv { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>; }; }; tps { pmic_int: pmic-int { - rockchip,pins = <6 4 RK_FUNC_GPIO &pcfg_pull_default>; + rockchip,pins = <6 RK_PA4 RK_FUNC_GPIO &pcfg_pull_default>; }; pwr_hold: pwr-hold { - rockchip,pins = <6 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <6 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; }; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 653127a377fa..3d1b02f45ffd 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -80,6 +80,11 @@ vop0_out: port { #address-cells = <1>; #size-cells = <0>; + + vop0_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop0>; + }; }; }; @@ -101,6 +106,49 @@ vop1_out: port { #address-cells = <1>; #size-cells = <0>; + + vop1_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop1>; + }; + }; + }; + + hdmi: hdmi@10116000 { + compatible = "rockchip,rk3066-hdmi"; + reg = <0x10116000 0x2000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HDMI>; + clock-names = "hclk"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>; + power-domains = <&power RK3066_PD_VIO>; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in_vop0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop0_out_hdmi>; + }; + + hdmi_in_vop1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vop1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; }; }; @@ -343,33 +391,33 @@ emac { emac_xfer: emac-xfer { - rockchip,pins = <RK_GPIO1 16 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */ - <RK_GPIO1 17 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */ - <RK_GPIO1 18 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */ - <RK_GPIO1 19 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */ - <RK_GPIO1 20 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */ - <RK_GPIO1 21 RK_FUNC_2 &pcfg_pull_none>, /* crs_dvalid */ - <RK_GPIO1 22 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */ - <RK_GPIO1 23 RK_FUNC_2 &pcfg_pull_none>; /* rxd0 */ + rockchip,pins = <1 RK_PC0 2 &pcfg_pull_none>, /* mac_clk */ + <1 RK_PC1 2 &pcfg_pull_none>, /* tx_en */ + <1 RK_PC2 2 &pcfg_pull_none>, /* txd1 */ + <1 RK_PC3 2 &pcfg_pull_none>, /* txd0 */ + <1 RK_PC4 2 &pcfg_pull_none>, /* rx_err */ + <1 RK_PC5 2 &pcfg_pull_none>, /* crs_dvalid */ + <1 RK_PC6 2 &pcfg_pull_none>, /* rxd1 */ + <1 RK_PC7 2 &pcfg_pull_none>; /* rxd0 */ }; emac_mdio: emac-mdio { - rockchip,pins = <RK_GPIO1 24 RK_FUNC_2 &pcfg_pull_none>, /* mac_md */ - <RK_GPIO1 25 RK_FUNC_2 &pcfg_pull_none>; /* mac_mdclk */ + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_none>, /* mac_md */ + <1 RK_PD1 2 &pcfg_pull_none>; /* mac_mdclk */ }; }; emmc { emmc_clk: emmc-clk { - rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <3 RK_PD7 2 &pcfg_pull_default>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <4 RK_PB1 2 &pcfg_pull_default>; }; emmc_rst: emmc-rst { - rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <4 RK_PB2 2 &pcfg_pull_default>; }; /* @@ -380,245 +428,256 @@ */ }; + hdmi { + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>; + }; + + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>, + <0 RK_PA2 1 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD4 1 &pcfg_pull_none>, + <2 RK_PD5 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD6 1 &pcfg_pull_none>, + <2 RK_PD7 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA0 1 &pcfg_pull_none>, + <3 RK_PA1 1 &pcfg_pull_none>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>, - <RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA2 2 &pcfg_pull_none>, + <3 RK_PA3 2 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { - rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>, + <3 RK_PA5 1 &pcfg_pull_none>; }; }; pwm0 { pwm0_out: pwm0-out { - rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>; }; }; pwm1 { pwm1_out: pwm1-out { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>; }; }; pwm2 { pwm2_out: pwm2-out { - rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>; }; }; pwm3 { pwm3_out: pwm3-out { - rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>; }; }; spi0 { spi0_clk: spi0-clk { - rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA5 2 &pcfg_pull_default>; }; spi0_cs0: spi0-cs0 { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA4 2 &pcfg_pull_default>; }; spi0_tx: spi0-tx { - rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA7 2 &pcfg_pull_default>; }; spi0_rx: spi0-rx { - rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA6 2 &pcfg_pull_default>; }; spi0_cs1: spi0-cs1 { - rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <4 RK_PB7 1 &pcfg_pull_default>; }; }; spi1 { spi1_clk: spi1-clk { - rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PC3 2 &pcfg_pull_default>; }; spi1_cs0: spi1-cs0 { - rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PC4 2 &pcfg_pull_default>; }; spi1_rx: spi1-rx { - rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PC6 2 &pcfg_pull_default>; }; spi1_tx: spi1-tx { - rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PC5 2 &pcfg_pull_default>; }; spi1_cs1: spi1-cs1 { - rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>; + rockchip,pins = <2 RK_PC7 2 &pcfg_pull_default>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>, + <1 RK_PA1 1 &pcfg_pull_default>; }; uart0_cts: uart0-cts { - rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA2 1 &pcfg_pull_default>; }; uart0_rts: uart0-rts { - rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA3 1 &pcfg_pull_default>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA4 1 &pcfg_pull_default>, + <1 RK_PA5 1 &pcfg_pull_default>; }; uart1_cts: uart1-cts { - rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_default>; }; uart1_rts: uart1-rts { - rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>; }; }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>, + <1 RK_PB1 1 &pcfg_pull_default>; }; /* no rts / cts for uart2 */ }; uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PD3 1 &pcfg_pull_default>, + <3 RK_PD4 1 &pcfg_pull_default>; }; uart3_cts: uart3-cts { - rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PD5 1 &pcfg_pull_default>; }; uart3_rts: uart3-rts { - rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PD6 1 &pcfg_pull_default>; }; }; sd0 { sd0_clk: sd0-clk { - rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB0 1 &pcfg_pull_default>; }; sd0_cmd: sd0-cmd { - rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB1 1 &pcfg_pull_default>; }; sd0_cd: sd0-cd { - rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB6 1 &pcfg_pull_default>; }; sd0_wp: sd0-wp { - rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB7 1 &pcfg_pull_default>; }; sd0_bus1: sd0-bus-width1 { - rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB2 1 &pcfg_pull_default>; }; sd0_bus4: sd0-bus-width4 { - rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PB2 1 &pcfg_pull_default>, + <3 RK_PB3 1 &pcfg_pull_default>, + <3 RK_PB4 1 &pcfg_pull_default>, + <3 RK_PB5 1 &pcfg_pull_default>; }; }; sd1 { sd1_clk: sd1-clk { - rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC5 1 &pcfg_pull_default>; }; sd1_cmd: sd1-cmd { - rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC0 1 &pcfg_pull_default>; }; sd1_cd: sd1-cd { - rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_default>; }; sd1_wp: sd1-wp { - rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC7 1 &pcfg_pull_default>; }; sd1_bus1: sd1-bus-width1 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC1 1 &pcfg_pull_default>; }; sd1_bus4: sd1-bus-width4 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <3 RK_PC1 1 &pcfg_pull_default>, + <3 RK_PC2 1 &pcfg_pull_default>, + <3 RK_PC3 1 &pcfg_pull_default>, + <3 RK_PC4 1 &pcfg_pull_default>; }; }; i2s0 { i2s0_bus: i2s0-bus { - rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PA7 1 &pcfg_pull_default>, + <0 RK_PB0 1 &pcfg_pull_default>, + <0 RK_PB1 1 &pcfg_pull_default>, + <0 RK_PB2 1 &pcfg_pull_default>, + <0 RK_PB3 1 &pcfg_pull_default>, + <0 RK_PB4 1 &pcfg_pull_default>, + <0 RK_PB5 1 &pcfg_pull_default>, + <0 RK_PB6 1 &pcfg_pull_default>, + <0 RK_PB7 1 &pcfg_pull_default>; }; }; i2s1 { i2s1_bus: i2s1-bus { - rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>, + <0 RK_PC1 1 &pcfg_pull_default>, + <0 RK_PC2 1 &pcfg_pull_default>, + <0 RK_PC3 1 &pcfg_pull_default>, + <0 RK_PC4 1 &pcfg_pull_default>, + <0 RK_PC5 1 &pcfg_pull_default>; }; }; i2s2 { i2s2_bus: i2s2-bus { - rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>; + rockchip,pins = <0 RK_PD0 1 &pcfg_pull_default>, + <0 RK_PD1 1 &pcfg_pull_default>, + <0 RK_PD2 1 &pcfg_pull_default>, + <0 RK_PD3 1 &pcfg_pull_default>, + <0 RK_PD4 1 &pcfg_pull_default>, + <0 RK_PD5 1 &pcfg_pull_default>; }; }; }; diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index c0eaa9c5490b..c32e1d441cf7 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -247,10 +247,10 @@ usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 94bc81c24049..c9a7f5409960 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -307,40 +307,40 @@ act8846 { act8846_dvs0_ctl: act8846-dvs0-ctl { - rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>; }; }; hym8563 { rtc_int: rtc-int { - rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; lan8720a { phy_int: phy-int { - rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; ir-receiver { ir_recv_pin: ir-recv-pin { - rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sd0 { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 3ed49898f4b2..10ede65d90f3 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -315,15 +315,15 @@ emmc { emmc_clk: emmc-clk { - rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD0 2 &pcfg_pull_none>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PD2 2 &pcfg_pull_up>; }; emmc_rst: emmc-rst { - rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD3 2 &pcfg_pull_none>; }; /* @@ -336,291 +336,291 @@ emac { emac_xfer: emac-xfer { - rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */ - <RK_GPIO3 17 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */ - <RK_GPIO3 18 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */ - <RK_GPIO3 19 RK_FUNC_2 &pcfg_pull_none>, /* rxd0 */ - <RK_GPIO3 20 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */ - <RK_GPIO3 21 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */ - <RK_GPIO3 22 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */ - <RK_GPIO3 23 RK_FUNC_2 &pcfg_pull_none>; /* crs_dvalid */ + rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none>, /* tx_en */ + <3 RK_PC1 2 &pcfg_pull_none>, /* txd1 */ + <3 RK_PC2 2 &pcfg_pull_none>, /* txd0 */ + <3 RK_PC3 2 &pcfg_pull_none>, /* rxd0 */ + <3 RK_PC4 2 &pcfg_pull_none>, /* rxd1 */ + <3 RK_PC5 2 &pcfg_pull_none>, /* mac_clk */ + <3 RK_PC6 2 &pcfg_pull_none>, /* rx_err */ + <3 RK_PC7 2 &pcfg_pull_none>; /* crs_dvalid */ }; emac_mdio: emac-mdio { - rockchip,pins = <RK_GPIO3 24 RK_FUNC_2 &pcfg_pull_none>, - <RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD0 2 &pcfg_pull_none>, + <3 RK_PD1 2 &pcfg_pull_none>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 25 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>, + <1 RK_PD1 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <RK_GPIO1 26 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 27 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD2 1 &pcfg_pull_none>, + <1 RK_PD3 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <RK_GPIO1 28 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 29 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>, + <1 RK_PD5 1 &pcfg_pull_none>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <RK_GPIO3 14 RK_FUNC_2 &pcfg_pull_none>, - <RK_GPIO3 15 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PB6 2 &pcfg_pull_none>, + <3 RK_PB7 2 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { - rockchip,pins = <RK_GPIO1 30 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 31 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD6 1 &pcfg_pull_none>, + <1 RK_PD7 1 &pcfg_pull_none>; }; }; lcdc1 { lcdc1_dclk: lcdc1-dclk { - rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_none>; }; lcdc1_den: lcdc1-den { - rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none>; }; lcdc1_hsync: lcdc1-hsync { - rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>; }; lcdc1_vsync: lcdc1-vsync { - rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>; }; lcdc1_rgb24: ldcd1-rgb24 { - rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>, - <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>, + <2 RK_PA1 1 &pcfg_pull_none>, + <2 RK_PA2 1 &pcfg_pull_none>, + <2 RK_PA3 1 &pcfg_pull_none>, + <2 RK_PA4 1 &pcfg_pull_none>, + <2 RK_PA5 1 &pcfg_pull_none>, + <2 RK_PA6 1 &pcfg_pull_none>, + <2 RK_PA7 1 &pcfg_pull_none>, + <2 RK_PB0 1 &pcfg_pull_none>, + <2 RK_PB1 1 &pcfg_pull_none>, + <2 RK_PB2 1 &pcfg_pull_none>, + <2 RK_PB3 1 &pcfg_pull_none>, + <2 RK_PB4 1 &pcfg_pull_none>, + <2 RK_PB5 1 &pcfg_pull_none>, + <2 RK_PB6 1 &pcfg_pull_none>, + <2 RK_PB7 1 &pcfg_pull_none>, + <2 RK_PC0 1 &pcfg_pull_none>, + <2 RK_PC1 1 &pcfg_pull_none>, + <2 RK_PC2 1 &pcfg_pull_none>, + <2 RK_PC3 1 &pcfg_pull_none>, + <2 RK_PC4 1 &pcfg_pull_none>, + <2 RK_PC5 1 &pcfg_pull_none>, + <2 RK_PC6 1 &pcfg_pull_none>, + <2 RK_PC7 1 &pcfg_pull_none>; }; }; pwm0 { pwm0_out: pwm0-out { - rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>; }; }; pwm1 { pwm1_out: pwm1-out { - rockchip,pins = <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD4 1 &pcfg_pull_none>; }; }; pwm2 { pwm2_out: pwm2-out { - rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD5 1 &pcfg_pull_none>; }; }; pwm3 { pwm3_out: pwm3-out { - rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD6 1 &pcfg_pull_none>; }; }; spi0 { spi0_clk: spi0-clk { - rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PA6 2 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { - rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PA7 2 &pcfg_pull_up>; }; spi0_tx: spi0-tx { - rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PA5 2 &pcfg_pull_up>; }; spi0_rx: spi0-rx { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PA4 2 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { - rockchip,pins = <RK_GPIO1 15 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <1 RK_PB7 1 &pcfg_pull_up>; }; }; spi1 { spi1_clk: spi1-clk { - rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PD6 1 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { - rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PD7 1 &pcfg_pull_up>; }; spi1_rx: spi1-rx { - rockchip,pins = <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PD4 1 &pcfg_pull_up>; }; spi1_tx: spi1-tx { - rockchip,pins = <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PD5 1 &pcfg_pull_up>; }; spi1_cs1: spi1-cs1 { - rockchip,pins = <RK_GPIO1 14 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PB6 2 &pcfg_pull_up>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up>, + <1 RK_PA1 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA2 1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { - rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA3 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up>, + <1 RK_PA5 1 &pcfg_pull_none>; }; uart1_cts: uart1-cts { - rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>; }; uart1_rts: uart1-rts { - rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA7 1 &pcfg_pull_none>; }; }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_up>, + <1 RK_PB1 1 &pcfg_pull_none>; }; /* no rts / cts for uart2 */ }; uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB2 1 &pcfg_pull_up>, + <1 RK_PB3 1 &pcfg_pull_none>; }; uart3_cts: uart3-cts { - rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB4 1 &pcfg_pull_none>; }; uart3_rts: uart3-rts { - rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB5 1 &pcfg_pull_none>; }; }; sd0 { sd0_clk: sd0-clk { - rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA2 1 &pcfg_pull_none>; }; sd0_cmd: sd0-cmd { - rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>; }; sd0_cd: sd0-cd { - rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PB0 1 &pcfg_pull_none>; }; sd0_wp: sd0-wp { - rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PB1 1 &pcfg_pull_none>; }; sd0_pwr: sd0-pwr { - rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none>; }; sd0_bus1: sd0-bus-width1 { - rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>; }; sd0_bus4: sd0-bus-width4 { - rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>, + <3 RK_PA5 1 &pcfg_pull_none>, + <3 RK_PA6 1 &pcfg_pull_none>, + <3 RK_PA7 1 &pcfg_pull_none>; }; }; sd1 { sd1_clk: sd1-clk { - rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC5 1 &pcfg_pull_none>; }; sd1_cmd: sd1-cmd { - rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC0 1 &pcfg_pull_none>; }; sd1_cd: sd1-cd { - rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>; }; sd1_wp: sd1-wp { - rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC7 1 &pcfg_pull_none>; }; sd1_bus1: sd1-bus-width1 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC1 1 &pcfg_pull_none>; }; sd1_bus4: sd1-bus-width4 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC1 1 &pcfg_pull_none>, + <3 RK_PC2 1 &pcfg_pull_none>, + <3 RK_PC3 1 &pcfg_pull_none>, + <3 RK_PC4 1 &pcfg_pull_none>; }; }; i2s0 { i2s0_bus: i2s0-bus { - rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>, + <1 RK_PC1 1 &pcfg_pull_none>, + <1 RK_PC2 1 &pcfg_pull_none>, + <1 RK_PC3 1 &pcfg_pull_none>, + <1 RK_PC4 1 &pcfg_pull_none>, + <1 RK_PC5 1 &pcfg_pull_none>; }; }; spdif { spdif_tx: spdif-tx { - rockchip,pins = <RK_GPIO1 14 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB6 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 29f19076dceb..da102fff96a2 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -865,228 +865,228 @@ emmc { emmc_clk: emmc-clk { - rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA7 2 &pcfg_pull_none>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC6 2 &pcfg_pull_none>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>, - <1 25 RK_FUNC_2 &pcfg_pull_none>, - <1 26 RK_FUNC_2 &pcfg_pull_none>, - <1 27 RK_FUNC_2 &pcfg_pull_none>, - <1 28 RK_FUNC_2 &pcfg_pull_none>, - <1 29 RK_FUNC_2 &pcfg_pull_none>, - <1 30 RK_FUNC_2 &pcfg_pull_none>, - <1 31 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_none>, + <1 RK_PD1 2 &pcfg_pull_none>, + <1 RK_PD2 2 &pcfg_pull_none>, + <1 RK_PD3 2 &pcfg_pull_none>, + <1 RK_PD4 2 &pcfg_pull_none>, + <1 RK_PD5 2 &pcfg_pull_none>, + <1 RK_PD6 2 &pcfg_pull_none>, + <1 RK_PD7 2 &pcfg_pull_none>; }; }; gmac { rgmii_pins: rgmii-pins { - rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>, - <2 12 RK_FUNC_1 &pcfg_pull_none>, - <2 25 RK_FUNC_1 &pcfg_pull_none>, - <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 22 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 23 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 9 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 17 RK_FUNC_1 &pcfg_pull_none>, - <2 16 RK_FUNC_1 &pcfg_pull_none>, - <2 21 RK_FUNC_2 &pcfg_pull_none>, - <2 20 RK_FUNC_2 &pcfg_pull_none>, - <2 11 RK_FUNC_1 &pcfg_pull_none>, - <2 8 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none>, + <2 RK_PB4 1 &pcfg_pull_none>, + <2 RK_PD1 1 &pcfg_pull_none>, + <2 RK_PC3 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC2 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC6 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC7 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PB1 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PB5 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC1 1 &pcfg_pull_none>, + <2 RK_PC0 1 &pcfg_pull_none>, + <2 RK_PC5 2 &pcfg_pull_none>, + <2 RK_PC4 2 &pcfg_pull_none>, + <2 RK_PB3 1 &pcfg_pull_none>, + <2 RK_PB0 1 &pcfg_pull_none>; }; rmii_pins: rmii-pins { - rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>, - <2 12 RK_FUNC_1 &pcfg_pull_none>, - <2 25 RK_FUNC_1 &pcfg_pull_none>, - <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, - <2 17 RK_FUNC_1 &pcfg_pull_none>, - <2 16 RK_FUNC_1 &pcfg_pull_none>, - <2 8 RK_FUNC_1 &pcfg_pull_none>, - <2 15 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none>, + <2 RK_PB4 1 &pcfg_pull_none>, + <2 RK_PD1 1 &pcfg_pull_none>, + <2 RK_PC3 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC2 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PB5 1 &pcfg_pull_none_drv_12ma>, + <2 RK_PC1 1 &pcfg_pull_none>, + <2 RK_PC0 1 &pcfg_pull_none>, + <2 RK_PB0 1 &pcfg_pull_none>, + <2 RK_PB7 1 &pcfg_pull_none>; }; phy_pins: phy-pins { - rockchip,pins = <2 14 RK_FUNC_2 &pcfg_pull_none>, - <2 8 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <2 RK_PB6 2 &pcfg_pull_none>, + <2 RK_PB0 2 &pcfg_pull_none>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, - <0 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>, + <0 RK_PA1 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, - <0 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>, + <0 RK_PA3 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>, - <2 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>, + <2 RK_PC5 1 &pcfg_pull_none>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, - <0 7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>, + <0 RK_PA7 1 &pcfg_pull_none>; }; }; spi-0 { spi0_clk: spi0-clk { - rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { - rockchip,pins = <0 14 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB6 2 &pcfg_pull_up>; }; spi0_tx: spi0-tx { - rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB3 2 &pcfg_pull_up>; }; spi0_rx: spi0-rx { - rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB5 2 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { - rockchip,pins = <1 12 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <1 RK_PB4 1 &pcfg_pull_up>; }; }; spi-1 { spi1_clk: spi1-clk { - rockchip,pins = <0 23 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { - rockchip,pins = <2 2 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA2 2 &pcfg_pull_up>; }; spi1_rx: spi1-rx { - rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA0 2 &pcfg_pull_up>; }; spi1_tx: spi1-tx { - rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA1 2 &pcfg_pull_up>; }; spi1_cs1: spi1-cs1 { - rockchip,pins = <2 3 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA3 2 &pcfg_pull_up>; }; }; i2s1 { i2s1_bus: i2s1-bus { - rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>, - <0 9 RK_FUNC_1 &pcfg_pull_none>, - <0 11 RK_FUNC_1 &pcfg_pull_none>, - <0 12 RK_FUNC_1 &pcfg_pull_none>, - <0 13 RK_FUNC_1 &pcfg_pull_none>, - <0 14 RK_FUNC_1 &pcfg_pull_none>, - <1 2 RK_FUNC_2 &pcfg_pull_none>, - <1 4 RK_FUNC_2 &pcfg_pull_none>, - <1 5 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 1 &pcfg_pull_none>, + <0 RK_PB1 1 &pcfg_pull_none>, + <0 RK_PB3 1 &pcfg_pull_none>, + <0 RK_PB4 1 &pcfg_pull_none>, + <0 RK_PB5 1 &pcfg_pull_none>, + <0 RK_PB6 1 &pcfg_pull_none>, + <1 RK_PA2 2 &pcfg_pull_none>, + <1 RK_PA4 2 &pcfg_pull_none>, + <1 RK_PA5 2 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { - rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC5 1 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { - rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>; }; }; pwm2 { pwm2_pin: pwm2-pin { - rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB4 2 &pcfg_pull_none>; }; }; pwm3 { pwm3_pin: pwm3-pin { - rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>; }; }; spdif { spdif_tx: spdif-tx { - rockchip,pins = <3 31 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD7 2 &pcfg_pull_none>; }; }; tsadc { otp_gpio: otp-gpio { - rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; otp_out: otp-out { - rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD0 2 &pcfg_pull_none>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>, - <2 27 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>, + <2 RK_PD3 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD5 1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { - rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC1 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>, - <1 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>, + <1 RK_PB2 1 &pcfg_pull_none>; }; uart1_cts: uart1-cts { - rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>; }; uart1_rts: uart1-rts { - rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB3 1 &pcfg_pull_none>; }; }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, - <1 19 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>, + <1 RK_PC3 2 &pcfg_pull_none>; }; uart21_xfer: uart21-xfer { - rockchip,pins = <1 10 RK_FUNC_2 &pcfg_pull_up>, - <1 9 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB2 2 &pcfg_pull_up>, + <1 RK_PB1 2 &pcfg_pull_none>; }; uart2_cts: uart2-cts { - rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD1 1 &pcfg_pull_none>; }; uart2_rts: uart2-rts { - rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD0 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 6592c809e2a5..80080767c365 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -175,13 +175,13 @@ &pinctrl { lcd { lcd_en: lcd-en { - rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wifi { wifi_pwr: wifi-pwr { - rockchip,pins = <7 9 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 97e4d552ff0f..820440715302 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -314,25 +314,25 @@ backlight { bl_en: bl-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buttons { pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; lcd { lcd_cs: lcd-cs { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; @@ -342,34 +342,34 @@ * high-speed mode on EVB board so bump up to 8ma. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; eth_phy { eth_phy_pwr: eth-phy-pwr { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts index 29af26e6d442..4847cf902a15 100644 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ b/arch/arm/boot/dts/rk3288-fennec.dts @@ -278,27 +278,27 @@ gmac { phy_int: phy-int { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_pmeb: phy-pmeb { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usbphy { host_drv: host-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 0f3c29d7fbab..135e8832141f 100644 --- a/arch/arm/boot/dts/rk3288-firefly-beta.dts +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts @@ -18,13 +18,13 @@ &pinctrl { act8846 { pmic_vsel: pmic-vsel { - rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>; }; }; ir { ir_int: ir-int { - rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index f57f286a93c3..61435d8ee37b 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -224,25 +224,25 @@ act8846 { pwr_hold: pwr-hold { - rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>; }; pmic_vsel: pmic-vsel { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_output_low>; }; }; gmac { phy_int: phy-int { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_pmeb: phy-pmeb { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 3a646c5f4fcf..1574383fd2dc 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -306,39 +306,39 @@ &pinctrl { ir { ir_int: ir-int { - rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; dvp { dvp_pwr: dvp-pwr { - rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; cif_pwr: cif-pwr { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; hym8563 { rtc_int: rtc-int { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { power_led: power-led { - rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; work_led: work-led { - rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -348,44 +348,44 @@ * high-speed mode on firefly board so bump up to 12ma. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio { wifi_enable: wifi-enable { - rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_host { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; usbhub_rst: usbhub-rst { - rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; }; }; usb_otg { otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts index 556ab42dd81c..313459dab2e4 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dts +++ b/arch/arm/boot/dts/rk3288-firefly.dts @@ -18,13 +18,13 @@ &pinctrl { act8846 { pmic_vsel: pmic-vsel { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_output_low>; }; }; ir { ir_int: ir-int { - rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index a6ff7eac4aa8..5e0a19004e46 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -392,49 +392,49 @@ act8846 { pwr_hold: pwr-hold { - rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>; }; }; dvp { dvp_pwr: dvp-pwr { - rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; gmac { phy_int: phy-int { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_pmeb: phy-pmeb { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; hym8563 { rtc_int: rtc-int { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { power_led: power-led { - rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; work_led: work-led { - rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -444,38 +444,38 @@ * high-speed mode on firefly board so bump up to 12ma. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_host { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; usbhub_rst: usbhub-rst { - rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; }; }; usb_otg { otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index fb7365b604bb..c41d012c8850 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -296,29 +296,29 @@ act8846 { pmic_int: pmic-int { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; pmic_sleep: pmic-sleep { - rockchip,pins = <0 0 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_output_low>; }; pmic_vsel: pmic-vsel { - rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>; }; }; gmac { phy_int: phy-int { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_pmeb: phy-pmeb { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; @@ -328,28 +328,28 @@ * high-speed mode on firefly board so bump up to 12ma. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_host { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts index 7077c3403483..1e33859de484 100644 --- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts +++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts @@ -160,15 +160,15 @@ buttons { user_button_pins: user-button-pins { /* button 1 */ - rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_pull_up>, + rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, /* button 2 */ - <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; rv4162 { i2c_rtc_int: i2c-rtc-int { - rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <5 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; @@ -178,44 +178,44 @@ * high-speed mode on pcm-947 board so bump up to 12 mA. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; touchscreen { ts_irq_pin: ts-irq-pin { - rockchip,pins = <5 15 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <5 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_host { host0_vbus_drv: host0-vbus-drv { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; host1_vbus_drv: host1-vbus-drv { - rockchip,pins = <2 0 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_otg { otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi index c218dd54c9b5..77a47b9b756d 100644 --- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -342,49 +342,49 @@ * We also have external pulls, so disable the internal ones. */ emmc_clk: emmc-clk { - rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_12ma>; + rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_12ma>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_12ma>; + rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_12ma>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 1 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 2 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 3 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 4 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 5 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 6 RK_FUNC_2 &pcfg_pull_none_12ma>, - <3 7 RK_FUNC_2 &pcfg_pull_none_12ma>; + rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_12ma>, + <3 RK_PA1 2 &pcfg_pull_none_12ma>, + <3 RK_PA2 2 &pcfg_pull_none_12ma>, + <3 RK_PA3 2 &pcfg_pull_none_12ma>, + <3 RK_PA4 2 &pcfg_pull_none_12ma>, + <3 RK_PA5 2 &pcfg_pull_none_12ma>, + <3 RK_PA6 2 &pcfg_pull_none_12ma>, + <3 RK_PA7 2 &pcfg_pull_none_12ma>; }; }; gmac { phy_int: phy-int { - rockchip,pins = <4 2 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; leds { user_led: user-led { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; /* Pin for switching state between sleep and non-sleep state */ pmic_sleep: pmic-sleep { - rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 28972fb4e221..a6ffc381abaa 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -265,39 +265,39 @@ act8846 { pmic_vsel: pmic-vsel { - rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>; }; pwr_hold: pwr-hold { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_output_high>; }; }; buttons { pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; ir { ir_int: ir-int { - rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 32e1ab336662..9f9e2bfd1295 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -231,13 +231,13 @@ emmc { emmc_reset: emmc-reset { - rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; gmac { phy_rst: phy-rst { - rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 5b7e1c9e92e1..cdcdc921ee09 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -204,53 +204,53 @@ &pinctrl { ir { ir_int: ir-int { - rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; headphone { hp_det: hp-det { - rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; }; phone_ctl: phone-ctl { - rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sata { sata_pwr_en: sata-pwr-en { - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdmmc { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio { wifi_enable: wifi-enable { - rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts index d97da89bcd51..970e13859198 100644 --- a/arch/arm/boot/dts/rk3288-tinker-s.dts +++ b/arch/arm/boot/dts/rk3288-tinker-s.dts @@ -23,3 +23,8 @@ mmc-ddr-1_8v; status = "okay"; }; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec_c0>; +}; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index ef653c3209bc..293576869546 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -5,6 +5,7 @@ #include "rk3288.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/clock/rockchip,rk808.h> / { chosen { @@ -61,6 +62,16 @@ }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 RK808_CLKOUT1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + reset-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_LOW>, + <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -338,6 +349,7 @@ status = "okay"; sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; }; &pinctrl { @@ -352,68 +364,75 @@ backlight { bl_en: bl-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buttons { pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; eth_phy { eth_phy_pwr: eth-phy-pwr { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \ + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO \ &pcfg_pull_up>; }; dvs_1: dvs-1 { - rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \ + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO \ &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \ + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO \ &pcfg_pull_down>; }; }; sdmmc { sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 \ + rockchip,pins = <6 RK_PC4 1 \ &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; pwr_3g: pwr-3g { - rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio { + wifi_enable: wifi-enable { + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; @@ -440,6 +459,24 @@ vqmmc-supply = <&vccio_sd>; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_18>; + status = "okay"; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index eaf921694e68..445270aa136e 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -73,7 +73,7 @@ &pinctrl { codec { hp_det: hp-det { - rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <6 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; /* @@ -82,17 +82,17 @@ * we've got a ts3a227e chip but the driver requires it. */ int_codec: int-codec { - rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <6 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>; }; mic_det: mic-det { - rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <6 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; headset { ts3a227e_int_l: ts3a227e-int-l { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts index 5c94a33d695d..406146cbff29 100644 --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -42,23 +42,23 @@ &pinctrl { hdmi { vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; usb-host { usb2_pwr_en: usb2-pwr-en { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index b54746df3661..fbef34578100 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -176,8 +176,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; + regulator-off-in-suspend; }; }; }; @@ -229,6 +228,8 @@ &pinctrl { pinctrl-0 = < /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff &global_pwroff /* Wake only */ @@ -236,6 +237,8 @@ >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff &global_pwroff /* Sleep only */ @@ -244,51 +247,51 @@ backlight { bl_en: bl-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buttons { ap_lid_int_l: ap-lid-int-l { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; charger { ac_present_ap: ac-present-ap { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; cros-ec { ec_int: ec-int { - rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; suspend { suspend_l_wake: suspend-l-wake { - rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>; + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; }; suspend_l_sleep: suspend-l-sleep { - rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_high>; }; }; trackpad { trackpad_int: trackpad-int { - rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb-host { host1_pwr_en: host1-pwr-en { - rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; usbotg_pwren_h: usbotg-pwren-h { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index 9d6814c7f285..e248f55ee8d2 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -138,39 +138,39 @@ &pinctrl { backlight { bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buck-5v { drv_5v: drv-5v { - rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; hdmi { vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; lcd { lcd_enable_h: lcd-en { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index 2ba89895c33a..b1613af83d5d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -11,7 +11,10 @@ / { model = "Google Jerry"; - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", + compatible = "google,veyron-jerry-rev15", "google,veyron-jerry-rev14", + "google,veyron-jerry-rev13", "google,veyron-jerry-rev12", + "google,veyron-jerry-rev11", "google,veyron-jerry-rev10", + "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", "google,veyron-jerry-rev3", "google,veyron-jerry", "google,veyron", "rockchip,rk3288"; @@ -61,7 +64,9 @@ &rk808 { pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; regulators { mic_vcc: LDO_REG2 { @@ -101,39 +106,39 @@ &pinctrl { backlight { bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buck-5v { drv_5v: drv-5v { - rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; hdmi { vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; lcd { lcd_enable_h: lcd-en { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index d889ab3c8235..e852594417b5 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -186,17 +186,17 @@ &pinctrl { hdmi { power_hdmi_on: power-hdmi-on { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-mighty.dts b/arch/arm/boot/dts/rk3288-veyron-mighty.dts new file mode 100644 index 000000000000..27fbc07476d2 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-mighty.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron Mighty Rev 1+ board device tree source + * + * Copyright 2015 Google, Inc + */ + +/dts-v1/; + +#include "rk3288-veyron-jaq.dts" + +/ { + model = "Google Mighty"; + compatible = "google,veyron-mighty-rev5", "google,veyron-mighty-rev4", + "google,veyron-mighty-rev3", "google,veyron-mighty-rev2", + "google,veyron-mighty-rev1", "google,veyron-mighty", + "google,veyron", "rockchip,rk3288"; +}; + +&sdmmc { + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + &sdmmc_wp_gpio &sdmmc_bus4>; + wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + + /delete-property/ disable-wp; +}; + +&pinctrl { + sdmmc { + sdmmc_wp_gpio: sdmmc-wp-gpio { + rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index f95d0c5fcf71..468a1818545d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -191,65 +191,65 @@ &pinctrl { backlight { bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buck-5v { drv_5v: drv-5v { - rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buttons { volum_down_l: volum-down-l { - rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <5 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; }; volum_up_l: volum-up-l { - rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <5 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; hdmi { vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; lcd { lcd_enable_h: lcd-en { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; prochot { gpio_prochot: gpio-prochot { - rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; touchscreen { touch_int: touch-int { - rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; touch_rst: touch-rst { - rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 2950aadf49f0..9645be7b3d8c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -55,19 +55,19 @@ &pinctrl { buttons { pwr_key_h: pwr-key-h { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; emmc { emmc_reset: emmc-reset { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; sdmmc { sdmmc_wp_gpio: sdmmc-wp-gpio { - rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index a4570444cc79..fe950f9863e8 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -16,18 +16,18 @@ * We also have external pulls, so disable the internal ones. */ sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_none_drv_8ma>, + <6 RK_PC1 1 &pcfg_pull_none_drv_8ma>, + <6 RK_PC2 1 &pcfg_pull_none_drv_8ma>, + <6 RK_PC3 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_none_drv_8ma>; }; /* @@ -37,12 +37,12 @@ * think there's a card inserted */ sdmmc_cd_disabled: sdmmc-cd-disabled { - rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <6 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; /* This is where we actually hook up CD */ sdmmc_cd_gpio: sdmmc-cd-gpio { - rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index e16421d80d22..2ac8748a3a0c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -104,39 +104,39 @@ &pinctrl { backlight { bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buck-5v { drv_5v: drv-5v { - rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; hdmi { vcc50_hdmi_en: vcc50-hdmi-en { - rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; lcd { lcd_enable_h: lcd-en { - rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { dvs_1: dvs-1 { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; }; dvs_2: dvs-2 { - rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 192dbc089ade..1252522392c7 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -60,12 +60,19 @@ pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>; /* - * On the module itself this is one of these (depending - * on the actual card populated): + * Depending on the actual card populated GPIO4 D4 and D5 + * correspond to one of these signals on the module: + * + * D4: * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) + * + * D5: + * - BT_I2S_WS_BT_RFDISABLE_L + * - No connect */ - reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>, + <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>; }; vcc_5v: vcc-5v { @@ -93,6 +100,23 @@ regulator-boot-on; vin-supply = <&vcc_5v>; }; + + vdd_logic: vdd-logic { + compatible = "pwm-regulator"; + regulator-name = "vdd_logic"; + + pwms = <&pwm1 0 1994 0>; + pwm-supply = <&vcc33_sys>; + + pwm-dutycycle-range = <0x7b 0>; + pwm-dutycycle-unit = <0x94>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <4000>; + }; }; &cpu0 { @@ -193,8 +217,7 @@ regulator-max-microvolt = <1250000>; regulator-ramp-delay = <6001>; regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; + regulator-off-in-suspend; }; }; @@ -376,10 +399,6 @@ &uart0 { status = "okay"; - /* We need to go faster than 24MHz, so adjust clock parents / rates */ - assigned-clocks = <&cru SCLK_UART0>; - assigned-clock-rates = <48000000>; - /* Pins don't include flow control by default; add that in */ pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; @@ -431,10 +450,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = < /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff &global_pwroff >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff &global_pwroff >; @@ -458,13 +481,13 @@ buttons { pwr_key_l: pwr-key-l { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; emmc { emmc_reset: emmc-reset { - rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; /* @@ -472,51 +495,51 @@ * We also have external pulls, so disable the internal ones. */ emmc_clk: emmc-clk { - rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_drv_8ma>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_drv_8ma>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, - <3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA1 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA2 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA3 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA4 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA5 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA6 2 &pcfg_pull_none_drv_8ma>, + <3 RK_PA7 2 &pcfg_pull_none_drv_8ma>; }; }; pmic { pmic_int_l: pmic-int-l { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; reboot { ap_warm_reset_h: ap-warm-reset-h { - rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; recovery-switch { rec_mode_l: rec-mode-l { - rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; sdio0 { wifi_enable_h: wifienable-h { - rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; /* NOTE: mislabelled on schematic; should be bt_enable_h */ bt_enable_l: bt-enable-l { - rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; /* @@ -524,30 +547,30 @@ * We also have external pulls, so disable the internal ones. */ sdio0_bus4: sdio0-bus4 { - rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, - <4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <4 RK_PC4 1 &pcfg_pull_none_drv_8ma>, + <4 RK_PC5 1 &pcfg_pull_none_drv_8ma>, + <4 RK_PC6 1 &pcfg_pull_none_drv_8ma>, + <4 RK_PC7 1 &pcfg_pull_none_drv_8ma>; }; sdio0_cmd: sdio0-cmd { - rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <4 RK_PD0 1 &pcfg_pull_none_drv_8ma>; }; sdio0_clk: sdio0-clk { - rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>; }; }; tpm { tpm_int_h: tpm-int-h { - rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; write-protect { fw_wp_ap: fw-wp-ap { - rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index 40b232eb5011..ba06e9f97ddc 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -448,13 +448,13 @@ pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb_host { phy_pwr_en: phy-pwr-en { - rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; }; usb2_pwr_en: usb2-pwr-en { @@ -464,7 +464,7 @@ usb_otg { otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 8ce3dd2264b1..aa017abf4f42 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -64,6 +64,7 @@ #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; + dynamic-power-coefficient = <370>; }; cpu1: cpu@501 { device_type = "cpu"; @@ -74,6 +75,7 @@ #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; + dynamic-power-coefficient = <370>; }; cpu2: cpu@502 { device_type = "cpu"; @@ -84,6 +86,7 @@ #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; + dynamic-power-coefficient = <370>; }; cpu3: cpu@503 { device_type = "cpu"; @@ -94,6 +97,7 @@ #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; + dynamic-power-coefficient = <370>; }; }; @@ -569,6 +573,7 @@ pinctrl-1 = <&otp_out>; pinctrl-2 = <&otp_gpio>; #thermal-sensor-cells = <1>; + rockchip,grf = <&grf>; rockchip,hw-tshut-temp = <95000>; status = "disabled"; }; @@ -1383,19 +1388,6 @@ reg = <0x0 0xffaf0080 0x0 0x20>; }; - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - interrupt-controller; - #interrupt-cells = <3>; - #address-cells = <0>; - - reg = <0x0 0xffc01000 0x0 0x1000>, - <0x0 0xffc02000 0x0 0x2000>, - <0x0 0xffc04000 0x0 0x2000>, - <0x0 0xffc06000 0x0 0x2000>; - interrupts = <GIC_PPI 9 0xf04>; - }; - efuse: efuse@ffb40000 { compatible = "rockchip,rk3288-efuse"; reg = <0x0 0xffb40000 0x0 0x20>; @@ -1409,6 +1401,19 @@ }; }; + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x0 0xffc01000 0x0 0x1000>, + <0x0 0xffc02000 0x0 0x2000>, + <0x0 0xffc04000 0x0 0x2000>, + <0x0 0xffc06000 0x0 0x2000>; + interrupts = <GIC_PPI 9 0xf04>; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3288-pinctrl"; rockchip,grf = <&grf>; @@ -1536,16 +1541,16 @@ hdmi { hdmi_cec_c0: hdmi-cec-c0 { - rockchip,pins = <7 RK_PC0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>; }; hdmi_cec_c7: hdmi-cec-c7 { - rockchip,pins = <7 RK_PC7 RK_FUNC_4 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC7 4 &pcfg_pull_none>; }; hdmi_ddc: hdmi-ddc { - rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>, - <7 20 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>, + <7 RK_PC4 2 &pcfg_pull_none>; }; }; @@ -1568,421 +1573,421 @@ sleep { global_pwroff: global-pwroff { - rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>; }; ddrio_pwroff: ddrio-pwroff { - rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>; }; ddr0_retention: ddr0-retention { - rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PA2 1 &pcfg_pull_up>; }; ddr1_retention: ddr1-retention { - rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>; }; }; edp { edp_hpd: edp-hpd { - rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; + rockchip,pins = <7 RK_PB3 2 &pcfg_pull_down>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>, - <0 16 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>, + <0 RK_PC0 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>, - <8 5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <8 RK_PA4 1 &pcfg_pull_none>, + <8 RK_PA5 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>, - <6 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <6 RK_PB1 1 &pcfg_pull_none>, + <6 RK_PB2 1 &pcfg_pull_none>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>, - <2 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>, + <2 RK_PC1 1 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { - rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>, - <7 18 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC1 1 &pcfg_pull_none>, + <7 RK_PC2 1 &pcfg_pull_none>; }; }; i2c5 { i2c5_xfer: i2c5-xfer { - rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>, - <7 20 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC3 1 &pcfg_pull_none>, + <7 RK_PC4 1 &pcfg_pull_none>; }; }; i2s0 { i2s0_bus: i2s0-bus { - rockchip,pins = <6 0 RK_FUNC_1 &pcfg_pull_none>, - <6 1 RK_FUNC_1 &pcfg_pull_none>, - <6 2 RK_FUNC_1 &pcfg_pull_none>, - <6 3 RK_FUNC_1 &pcfg_pull_none>, - <6 4 RK_FUNC_1 &pcfg_pull_none>, - <6 8 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <6 RK_PA0 1 &pcfg_pull_none>, + <6 RK_PA1 1 &pcfg_pull_none>, + <6 RK_PA2 1 &pcfg_pull_none>, + <6 RK_PA3 1 &pcfg_pull_none>, + <6 RK_PA4 1 &pcfg_pull_none>, + <6 RK_PB0 1 &pcfg_pull_none>; }; }; lcdc { lcdc_ctl: lcdc-ctl { - rockchip,pins = <1 24 RK_FUNC_1 &pcfg_pull_none>, - <1 25 RK_FUNC_1 &pcfg_pull_none>, - <1 26 RK_FUNC_1 &pcfg_pull_none>, - <1 27 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>, + <1 RK_PD1 1 &pcfg_pull_none>, + <1 RK_PD2 1 &pcfg_pull_none>, + <1 RK_PD3 1 &pcfg_pull_none>; }; }; sdmmc { sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up>; }; sdmmc_cd: sdmmc-cd { - rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <6 RK_PC6 1 &pcfg_pull_up>; }; sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>; }; sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>, - <6 17 RK_FUNC_1 &pcfg_pull_up>, - <6 18 RK_FUNC_1 &pcfg_pull_up>, - <6 19 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>, + <6 RK_PC1 1 &pcfg_pull_up>, + <6 RK_PC2 1 &pcfg_pull_up>, + <6 RK_PC3 1 &pcfg_pull_up>; }; }; sdio0 { sdio0_bus1: sdio0-bus1 { - rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>; }; sdio0_bus4: sdio0-bus4 { - rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>, - <4 21 RK_FUNC_1 &pcfg_pull_up>, - <4 22 RK_FUNC_1 &pcfg_pull_up>, - <4 23 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>, + <4 RK_PC5 1 &pcfg_pull_up>, + <4 RK_PC6 1 &pcfg_pull_up>, + <4 RK_PC7 1 &pcfg_pull_up>; }; sdio0_cmd: sdio0-cmd { - rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD0 1 &pcfg_pull_up>; }; sdio0_clk: sdio0-clk { - rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none>; }; sdio0_cd: sdio0-cd { - rockchip,pins = <4 26 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD2 1 &pcfg_pull_up>; }; sdio0_wp: sdio0-wp { - rockchip,pins = <4 27 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD3 1 &pcfg_pull_up>; }; sdio0_pwr: sdio0-pwr { - rockchip,pins = <4 28 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD4 1 &pcfg_pull_up>; }; sdio0_bkpwr: sdio0-bkpwr { - rockchip,pins = <4 29 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD5 1 &pcfg_pull_up>; }; sdio0_int: sdio0-int { - rockchip,pins = <4 30 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PD6 1 &pcfg_pull_up>; }; }; sdio1 { sdio1_bus1: sdio1-bus1 { - rockchip,pins = <3 24 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>; }; sdio1_bus4: sdio1-bus4 { - rockchip,pins = <3 24 4 &pcfg_pull_up>, - <3 25 4 &pcfg_pull_up>, - <3 26 4 &pcfg_pull_up>, - <3 27 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>, + <3 RK_PD1 4 &pcfg_pull_up>, + <3 RK_PD2 4 &pcfg_pull_up>, + <3 RK_PD3 4 &pcfg_pull_up>; }; sdio1_cd: sdio1-cd { - rockchip,pins = <3 28 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD4 4 &pcfg_pull_up>; }; sdio1_wp: sdio1-wp { - rockchip,pins = <3 29 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD5 4 &pcfg_pull_up>; }; sdio1_bkpwr: sdio1-bkpwr { - rockchip,pins = <3 30 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD6 4 &pcfg_pull_up>; }; sdio1_int: sdio1-int { - rockchip,pins = <3 31 4 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD7 4 &pcfg_pull_up>; }; sdio1_cmd: sdio1-cmd { - rockchip,pins = <4 6 4 &pcfg_pull_up>; + rockchip,pins = <4 RK_PA6 4 &pcfg_pull_up>; }; sdio1_clk: sdio1-clk { - rockchip,pins = <4 7 4 &pcfg_pull_none>; + rockchip,pins = <4 RK_PA7 4 &pcfg_pull_none>; }; sdio1_pwr: sdio1-pwr { - rockchip,pins = <4 9 4 &pcfg_pull_up>; + rockchip,pins = <4 RK_PB1 4 &pcfg_pull_up>; }; }; emmc { emmc_clk: emmc-clk { - rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PC0 2 &pcfg_pull_up>; }; emmc_pwr: emmc-pwr { - rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PB1 2 &pcfg_pull_up>; }; emmc_bus1: emmc-bus1 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>; }; emmc_bus4: emmc-bus4 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>, - <3 1 RK_FUNC_2 &pcfg_pull_up>, - <3 2 RK_FUNC_2 &pcfg_pull_up>, - <3 3 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>, + <3 RK_PA1 2 &pcfg_pull_up>, + <3 RK_PA2 2 &pcfg_pull_up>, + <3 RK_PA3 2 &pcfg_pull_up>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>, - <3 1 RK_FUNC_2 &pcfg_pull_up>, - <3 2 RK_FUNC_2 &pcfg_pull_up>, - <3 3 RK_FUNC_2 &pcfg_pull_up>, - <3 4 RK_FUNC_2 &pcfg_pull_up>, - <3 5 RK_FUNC_2 &pcfg_pull_up>, - <3 6 RK_FUNC_2 &pcfg_pull_up>, - <3 7 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>, + <3 RK_PA1 2 &pcfg_pull_up>, + <3 RK_PA2 2 &pcfg_pull_up>, + <3 RK_PA3 2 &pcfg_pull_up>, + <3 RK_PA4 2 &pcfg_pull_up>, + <3 RK_PA5 2 &pcfg_pull_up>, + <3 RK_PA6 2 &pcfg_pull_up>, + <3 RK_PA7 2 &pcfg_pull_up>; }; }; spi0 { spi0_clk: spi0-clk { - rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB4 1 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { - rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB5 1 &pcfg_pull_up>; }; spi0_tx: spi0-tx { - rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB6 1 &pcfg_pull_up>; }; spi0_rx: spi0-rx { - rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB7 1 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { - rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PC0 1 &pcfg_pull_up>; }; }; spi1 { spi1_clk: spi1-clk { - rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <7 RK_PB4 2 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { - rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <7 RK_PB5 2 &pcfg_pull_up>; }; spi1_rx: spi1-rx { - rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <7 RK_PB6 2 &pcfg_pull_up>; }; spi1_tx: spi1-tx { - rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <7 RK_PB7 2 &pcfg_pull_up>; }; }; spi2 { spi2_cs1: spi2-cs1 { - rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <8 RK_PA3 1 &pcfg_pull_up>; }; spi2_clk: spi2-clk { - rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <8 RK_PA6 1 &pcfg_pull_up>; }; spi2_cs0: spi2-cs0 { - rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <8 RK_PA7 1 &pcfg_pull_up>; }; spi2_rx: spi2-rx { - rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <8 RK_PB0 1 &pcfg_pull_up>; }; spi2_tx: spi2-tx { - rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <8 RK_PB1 1 &pcfg_pull_up>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>, - <4 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <4 RK_PC0 1 &pcfg_pull_up>, + <4 RK_PC1 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <4 RK_PC2 1 &pcfg_pull_up>; }; uart0_rts: uart0-rts { - rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <4 RK_PC3 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>, - <5 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <5 RK_PB0 1 &pcfg_pull_up>, + <5 RK_PB1 1 &pcfg_pull_none>; }; uart1_cts: uart1-cts { - rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB2 1 &pcfg_pull_up>; }; uart1_rts: uart1-rts { - rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <5 RK_PB3 1 &pcfg_pull_none>; }; }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>, - <7 23 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC6 1 &pcfg_pull_up>, + <7 RK_PC7 1 &pcfg_pull_none>; }; /* no rts / cts for uart2 */ }; uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>, - <7 8 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PA7 1 &pcfg_pull_up>, + <7 RK_PB0 1 &pcfg_pull_none>; }; uart3_cts: uart3-cts { - rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <7 RK_PB1 1 &pcfg_pull_up>; }; uart3_rts: uart3-rts { - rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PB2 1 &pcfg_pull_none>; }; }; uart4 { uart4_xfer: uart4-xfer { - rockchip,pins = <5 15 3 &pcfg_pull_up>, - <5 14 3 &pcfg_pull_none>; + rockchip,pins = <5 RK_PB7 3 &pcfg_pull_up>, + <5 RK_PB6 3 &pcfg_pull_none>; }; uart4_cts: uart4-cts { - rockchip,pins = <5 12 3 &pcfg_pull_up>; + rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>; }; uart4_rts: uart4-rts { - rockchip,pins = <5 13 3 &pcfg_pull_none>; + rockchip,pins = <5 RK_PB5 3 &pcfg_pull_none>; }; }; tsadc { otp_gpio: otp-gpio { - rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; otp_out: otp-out { - rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB2 1 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { - rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PA0 1 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { - rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 RK_PA1 1 &pcfg_pull_none>; }; }; pwm2 { pwm2_pin: pwm2-pin { - rockchip,pins = <7 22 3 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC6 3 &pcfg_pull_none>; }; }; pwm3 { pwm3_pin: pwm3-pin { - rockchip,pins = <7 23 3 &pcfg_pull_none>; + rockchip,pins = <7 RK_PC7 3 &pcfg_pull_none>; }; }; gmac { rgmii_pins: rgmii-pins { - rockchip,pins = <3 30 3 &pcfg_pull_none>, - <3 31 3 &pcfg_pull_none>, - <3 26 3 &pcfg_pull_none>, - <3 27 3 &pcfg_pull_none>, - <3 28 3 &pcfg_pull_none_12ma>, - <3 29 3 &pcfg_pull_none_12ma>, - <3 24 3 &pcfg_pull_none_12ma>, - <3 25 3 &pcfg_pull_none_12ma>, - <4 0 3 &pcfg_pull_none>, - <4 5 3 &pcfg_pull_none>, - <4 6 3 &pcfg_pull_none>, - <4 9 3 &pcfg_pull_none_12ma>, - <4 4 3 &pcfg_pull_none_12ma>, - <4 1 3 &pcfg_pull_none>, - <4 3 3 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>, + <3 RK_PD7 3 &pcfg_pull_none>, + <3 RK_PD2 3 &pcfg_pull_none>, + <3 RK_PD3 3 &pcfg_pull_none>, + <3 RK_PD4 3 &pcfg_pull_none_12ma>, + <3 RK_PD5 3 &pcfg_pull_none_12ma>, + <3 RK_PD0 3 &pcfg_pull_none_12ma>, + <3 RK_PD1 3 &pcfg_pull_none_12ma>, + <4 RK_PA0 3 &pcfg_pull_none>, + <4 RK_PA5 3 &pcfg_pull_none>, + <4 RK_PA6 3 &pcfg_pull_none>, + <4 RK_PB1 3 &pcfg_pull_none_12ma>, + <4 RK_PA4 3 &pcfg_pull_none_12ma>, + <4 RK_PA1 3 &pcfg_pull_none>, + <4 RK_PA3 3 &pcfg_pull_none>; }; rmii_pins: rmii-pins { - rockchip,pins = <3 30 3 &pcfg_pull_none>, - <3 31 3 &pcfg_pull_none>, - <3 28 3 &pcfg_pull_none>, - <3 29 3 &pcfg_pull_none>, - <4 0 3 &pcfg_pull_none>, - <4 5 3 &pcfg_pull_none>, - <4 4 3 &pcfg_pull_none>, - <4 1 3 &pcfg_pull_none>, - <4 2 3 &pcfg_pull_none>, - <4 3 3 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>, + <3 RK_PD7 3 &pcfg_pull_none>, + <3 RK_PD4 3 &pcfg_pull_none>, + <3 RK_PD5 3 &pcfg_pull_none>, + <4 RK_PA0 3 &pcfg_pull_none>, + <4 RK_PA5 3 &pcfg_pull_none>, + <4 RK_PA4 3 &pcfg_pull_none>, + <4 RK_PA1 3 &pcfg_pull_none>, + <4 RK_PA2 3 &pcfg_pull_none>, + <4 RK_PA3 3 &pcfg_pull_none>; }; }; spdif { spdif_tx: spdif-tx { - rockchip,pins = <RK_GPIO6 11 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <6 RK_PB3 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts index 1c4507b66fdd..b1db924710c8 100644 --- a/arch/arm/boot/dts/rv1108-elgin-r1.dts +++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts @@ -37,7 +37,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; no-sd; no-sdio; non-removable; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index f47ac86d2852..5876690ee09e 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -682,58 +682,58 @@ emmc { emmc_bus8: emmc-bus8 { - rockchip,pins = <2 RK_PA0 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA1 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA2 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA3 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA5 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA6 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <2 RK_PA7 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PA0 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA1 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA2 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA3 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA4 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA5 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA6 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA7 2 &pcfg_pull_up_drv_8ma>; }; emmc_clk: emmc-clk { - rockchip,pins = <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none_drv_8ma>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <2 RK_PB4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PB4 2 &pcfg_pull_up_drv_8ma>; }; }; gmac { rmii_pins: rmii-pins { - rockchip,pins = <1 RK_PC5 RK_FUNC_2 &pcfg_pull_none>, - <1 RK_PC3 RK_FUNC_2 &pcfg_pull_none>, - <1 RK_PC4 RK_FUNC_2 &pcfg_pull_none>, - <1 RK_PB2 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, - <1 RK_PB3 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, - <1 RK_PB4 RK_FUNC_3 &pcfg_pull_none_drv_12ma>, - <1 RK_PB5 RK_FUNC_3 &pcfg_pull_none>, - <1 RK_PB6 RK_FUNC_3 &pcfg_pull_none>, - <1 RK_PB7 RK_FUNC_3 &pcfg_pull_none>, - <1 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>, + <1 RK_PC3 2 &pcfg_pull_none>, + <1 RK_PC4 2 &pcfg_pull_none>, + <1 RK_PB2 3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB3 3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB4 3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB5 3 &pcfg_pull_none>, + <1 RK_PB6 3 &pcfg_pull_none>, + <1 RK_PB7 3 &pcfg_pull_none>, + <1 RK_PC2 3 &pcfg_pull_none>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 RK_PB1 RK_FUNC_1 &pcfg_pull_none_smt>, - <0 RK_PB2 RK_FUNC_1 &pcfg_pull_none_smt>; + rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none_smt>, + <0 RK_PB2 1 &pcfg_pull_none_smt>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PD3 1 &pcfg_pull_up>, + <2 RK_PD4 1 &pcfg_pull_up>; }; }; i2c2m1 { i2c2m1_xfer: i2c2m1-xfer { - rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>, - <0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC2 2 &pcfg_pull_none>, + <0 RK_PC6 3 &pcfg_pull_none>; }; i2c2m1_gpio: i2c2m1-gpio { @@ -744,8 +744,8 @@ i2c2m05v { i2c2m05v_xfer: i2c2m05v-xfer { - rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>, - <1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD5 2 &pcfg_pull_none>, + <1 RK_PD4 2 &pcfg_pull_none>; }; i2c2m05v_gpio: i2c2m05v-gpio { @@ -756,123 +756,123 @@ i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, - <0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB6 1 &pcfg_pull_none>, + <0 RK_PC4 2 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { - rockchip,pins = <0 RK_PC5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC5 1 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { - rockchip,pins = <0 RK_PC4 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>; }; }; pwm2 { pwm2_pin: pwm2-pin { - rockchip,pins = <0 RK_PC6 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC6 1 &pcfg_pull_none>; }; }; pwm3 { pwm3_pin: pwm3-pin { - rockchip,pins = <0 RK_PC0 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC0 1 &pcfg_pull_none>; }; }; pwm4 { pwm4_pin: pwm4-pin { - rockchip,pins = <1 RK_PC1 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC1 3 &pcfg_pull_none>; }; }; pwm5 { pwm5_pin: pwm5-pin { - rockchip,pins = <1 RK_PA7 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA7 2 &pcfg_pull_none>; }; }; pwm6 { pwm6_pin: pwm6-pin { - rockchip,pins = <1 RK_PB0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB0 2 &pcfg_pull_none>; }; }; pwm7 { pwm7_pin: pwm7-pin { - rockchip,pins = <1 RK_PB1 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <1 RK_PB1 2 &pcfg_pull_none>; }; }; sdmmc { sdmmc_clk: sdmmc-clk { - rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>; + rockchip,pins = <3 RK_PC4 1 &pcfg_pull_none_drv_4ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + rockchip,pins = <3 RK_PC5 1 &pcfg_pull_up_drv_4ma>; }; sdmmc_cd: sdmmc-cd { - rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_up_drv_4ma>; }; sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>; }; sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, - <3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, - <3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, - <3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC2 1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC1 1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC0 1 &pcfg_pull_up_drv_4ma>; }; }; spim0 { spim0_clk: spim0-clk { - rockchip,pins = <1 RK_PD0 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_up>; }; spim0_cs0: spim0-cs0 { - rockchip,pins = <1 RK_PD1 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD1 2 &pcfg_pull_up>; }; spim0_tx: spim0-tx { - rockchip,pins = <1 RK_PD3 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>; }; spim0_rx: spim0-rx { - rockchip,pins = <1 RK_PD2 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>; }; }; spim1 { spim1_clk: spim1-clk { - rockchip,pins = <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>; }; spim1_cs0: spim1-cs0 { - rockchip,pins = <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 1 &pcfg_pull_up>; }; spim1_rx: spim1-rx { - rockchip,pins = <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB0 1 &pcfg_pull_up>; }; spim1_tx: spim1-tx { - rockchip,pins = <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <0 RK_PA7 1 &pcfg_pull_up>; }; }; tsadc { otp_out: otp-out { - rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>; }; otp_gpio: otp-gpio { @@ -882,16 +882,16 @@ uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>, - <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>, + <3 RK_PA5 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { - rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>; }; uart0_rts_gpio: uart0-rts-gpio { @@ -901,40 +901,40 @@ uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, - <1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD3 1 &pcfg_pull_up>, + <1 RK_PD2 1 &pcfg_pull_none>; }; uart1_cts: uart1-cts { - rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>; }; uart1_rts: uart1-rts { - rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>; }; }; uart2m0 { uart2m0_xfer: uart2m0-xfer { - rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 1 &pcfg_pull_up>, + <2 RK_PD1 1 &pcfg_pull_none>; }; }; uart2m1 { uart2m1_xfer: uart2m1-xfer { - rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>, - <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up>, + <3 RK_PC2 2 &pcfg_pull_none>; }; }; uart2_5v { uart2_5v_cts: uart2_5v-cts { - rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>; }; uart2_5v_rts: uart2_5v-rts { - rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PD5 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index eb6d1926c0d6..fbbd93707404 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -376,7 +376,7 @@ vdd_core-supply = <&ldo14_reg>; clock-frequency = <16000000>; - clocks = <&clock_cam 0>; + clocks = <&camera 0>; clock-names = "mclk"; nreset-gpios = <&gpb 2 0>; nstby-gpios = <&gpb 0 0>; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index a44d5eb56bed..2ad642f51fd9 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -585,12 +585,10 @@ clock-names = "sclk_cam0", "sclk_cam1"; #address-cells = <1>; #size-cells = <1>; + #clock-cells = <1>; + clock-output-names = "cam_a_clkout", "cam_b_clkout"; ranges; - clock_cam: clock-controller { - #clock-cells = <1>; - }; - csis0: csis@fa600000 { compatible = "samsung,s5pv210-csis"; reg = <0xfa600000 0x4000>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index d159ee42ef29..2e2c1a7b1d1d 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC * * Copyright (C) 2015 Atmel, * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/dma/at91.h> @@ -688,13 +651,13 @@ ranges = <0 0xf8044000 0x1420>; }; - rstc@f8048000 { + reset_controller: rstc@f8048000 { compatible = "atmel,sama5d3-rstc"; reg = <0xf8048000 0x10>; clocks = <&clk32k>; }; - shdwc@f8048010 { + shutdown_controller: shdwc@f8048010 { compatible = "atmel,sama5d2-shdwc"; reg = <0xf8048010 0x10>; clocks = <&clk32k>; @@ -710,7 +673,7 @@ clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>; }; - watchdog@f8048040 { + watchdog: watchdog@f8048040 { compatible = "atmel,sama5d4-wdt"; reg = <0xf8048040 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/sama5d36ek_cmp.dts b/arch/arm/boot/dts/sama5d36ek_cmp.dts index b632143844e5..66695b9a3e77 100644 --- a/arch/arm/boot/dts/sama5d36ek_cmp.dts +++ b/arch/arm/boot/dts/sama5d36ek_cmp.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board * * Copyright (C) 2016 Atmel, - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "sama5d36.dtsi" diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi index a02f59021364..9d2563602cbe 100644 --- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module * * Copyright (C) 2016 Atmel, - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi index 97e171db5970..8a6916a69da4 100644 --- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board * * Copyright (C) 2016 Atmel, - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "sama5d3xcm_cmp.dtsi" diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 6c1e41f94549..6ab27a7b388d 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC * * Copyright (C) 2014 Atmel, * 2014 Nicolas Ferre <nicolas.ferre@atmel.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/at91.h> diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts index df2bab1624d4..64dc0799f3d7 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts @@ -9,6 +9,7 @@ &mmc { status = "okay"; cap-sd-highspeed; + cap-mmc-highspeed; broken-cd; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index e6ed7c0354a2..81fabf031eff 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1196,21 +1196,73 @@ status = "disabled"; }; + gpu@a0300000 { + /* + * This block is referred to as "Smart Graphics Adapter SGA500" + * in documentation but is in practice a pretty straight-forward + * MALI-400 GPU block. + */ + compatible = "stericsson,db8500-mali", "arm,mali-400"; + reg = <0xa0300000 0x10000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "combined"; + clocks = <&prcmu_clk PRCMU_ACLK>, <&prcmu_clk PRCMU_SGACLK>; + clock-names = "bus", "core"; + mali-supply = <&db8500_sga_reg>; + power-domains = <&pm_domains DOMAIN_VAPE>; + }; + mcde@a0350000 { - compatible = "stericsson,mcde"; - reg = <0xa0350000 0x1000>, /* MCDE */ - <0xa0351000 0x1000>, /* DSI link 1 */ - <0xa0352000 0x1000>, /* DSI link 2 */ - <0xa0353000 0x1000>; /* DSI link 3 */ + compatible = "ste,mcde"; + reg = <0xa0350000 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + epod-supply = <&db8500_b2r2_mcde_reg>; + vana-supply = <&ab8500_ldo_ana_reg>; clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */ <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */ - <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */ - <&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */ - <&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */ - <&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */ - <&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */ - <&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */ + <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */ + clock-names = "mcde", "lcd", "hdmi"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + dsi0: dsi@a0351000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0351000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; + clock-names = "hs", "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; + dsi1: dsi@a0352000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0352000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; + clock-names = "hs", "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; + dsi2: dsi@a0353000 { + compatible = "ste,mcde-dsi"; + reg = <0xa0353000 0x1000>; + vana-supply = <&ab8500_ldo_ana_reg>; + /* This DSI port only has the Low Power / Energy Save clock */ + clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>; + clock-names = "lp"; + #address-cells = <1>; + #size-cells = <0>; + }; }; cryp@a03cb000 { diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 35e944d8b5c4..eeaea21f5eca 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -190,5 +190,18 @@ }; }; }; + + mcde@a0350000 { + status = "okay"; + + dsi@a0351000 { + panel { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 0e7d77d719d7..76868444caa4 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -274,5 +274,18 @@ }; }; }; + + mcde@a0350000 { + status = "okay"; + + dsi@a0351000 { + panel { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 588b6ef94e93..4a4954492ed1 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -80,6 +80,19 @@ }; soc { + romem: nvmem@1fff7800 { + compatible = "st,stm32f4-otp"; + reg = <0x1fff7800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ts_cal1: calib@22c { + reg = <0x22c 0x2>; + }; + ts_cal2: calib@22e { + reg = <0x22e 0x2>; + }; + }; + timer2: timer@40000000 { compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 3c7216844a9b..6f1d0ac8c31c 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -102,6 +102,10 @@ }; }; +&rcc { + compatible = "st,stm32f769-rcc", "st,stm32f746-rcc", "st,stm32-rcc"; +}; + &cec { pinctrl-0 = <&cec_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi index 980b2769caf9..e44e7baa3f17 100644 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -188,6 +188,74 @@ }; }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins2{ + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + usart1_pins: usart1@0 { pins1 { pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */ diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 5cac79ebebb1..c065266ee377 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -339,6 +339,20 @@ dma-requests = <32>; }; + sdmmc1: sdmmc@52007000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x52007000 0x1000>; + interrupts = <49>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC1_CK>; + clock-names = "apb_pclk"; + resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + }; + exti: interrupt-controller@58000000 { compatible = "st,stm32h7-exti"; interrupt-controller; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts index dd06c8f3d09a..3acd2e9c434e 100644 --- a/arch/arm/boot/dts/stm32h743i-disco.dts +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -61,6 +61,14 @@ aliases { serial0 = &usart2; }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; &clk_hse { @@ -84,6 +92,18 @@ }; }; +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + &usart2 { pinctrl-0 = <&usart2_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index ebc3f0933f5c..ab78ad532375 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -70,13 +70,20 @@ regulator-always-on; }; + v2v9_sd: regulator-v2v9_sd { + compatible = "regulator-fixed"; + regulator-name = "v2v9_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + usbotg_hs_phy: usb-phy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; clocks = <&rcc USB1ULPI_CK>; clock-names = "main_clk"; }; - }; &adc_12 { @@ -122,6 +129,20 @@ }; }; +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&v2v9_sd>; + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 9ec4694e93a7..85c417d9983b 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -157,6 +157,27 @@ }; }; + cec_pins_sleep_a: cec-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ + }; + }; + + cec_pins_b: cec-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF5)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_b: cec-sleep-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ @@ -213,6 +234,13 @@ }; }; + i2c1_pins_sleep_a: i2c1-1 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + i2c2_pins_a: i2c2-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ @@ -223,6 +251,13 @@ }; }; + i2c2_pins_sleep_a: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + i2c5_pins_a: i2c5-0 { pins { pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ @@ -233,6 +268,152 @@ }; }; + i2c5_pins_sleep_a: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ + + }; + }; + + ltdc_pins_a: ltdc-a-0 { + pins { + pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_a: ltdc-a-1 { + pins { + pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */ + }; + }; + + ltdc_pins_b: ltdc-b-0 { + pins { + pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_b: ltdc-b-1 { + pins { + pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */ + }; + }; + m_can1_pins_a: m-can1-0 { pins1 { pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ @@ -325,6 +506,87 @@ }; }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins2{ + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + + spdifrx_pins_a: spdifrx-0 { + pins { + pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ + bias-disable; + }; + }; + + spdifrx_sleep_pins_a: spdifrx-1 { + pins { + pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ @@ -371,6 +633,13 @@ }; }; + i2c4_pins_sleep_a: i2c4-1 { + pins { + pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ + }; + }; + spi1_pins_a: spi1-0 { pins1 { pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts new file mode 100644 index 000000000000..098dbfb06b61 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c.dtsi" +#include "stm32mp157-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; + compatible = "st,stm32mp157a-dk1", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@c0000000 { + reg = <0xc0000000 0x20000000>; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +&cec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cec_pins_b>; + pinctrl-1 = <&cec_pins_sleep_b>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts new file mode 100644 index 000000000000..20ea601a546d --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157a-dk1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; + compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; + + reg18: reg18 { + compatible = "regulator-fixed"; + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + phy-dsi-supply = <®18>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_ep1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; + power-supply = <&v3v3>; + status = "okay"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +<dc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep1_out: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index d66edb0c66cd..62a8c78e7e2e 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -7,6 +7,8 @@ #include "stm32mp157c.dtsi" #include "stm32mp157-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> / { model = "STMicroelectronics STM32MP157C eval daughter"; @@ -41,12 +43,17 @@ regulator-always-on; }; - vdd_usb: vdd-usb { - compatible = "regulator-fixed"; - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + sd_switch: regulator-sd_switch { + compatible = "regulator-gpio"; + regulator-name = "sd_switch"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; regulator-always-on; + + gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 2900000 0x0>; }; }; @@ -60,6 +67,149 @@ i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&ipcc { + status = "okay"; }; &iwdg2 { @@ -75,6 +225,21 @@ status = "okay"; }; +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + vqmmc-supply = <&sd_switch>; + status = "okay"; +}; + &timers6 { status = "okay"; /* spare dmas for other usage */ diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index f8bbfff5950b..2afeee65c3ea 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -379,6 +379,19 @@ status = "disabled"; }; + spdifrx: audio-controller@4000d000 { + compatible = "st,stm32h7-spdifrx"; + #sound-dai-cells = <0>; + reg = <0x4000d000 0x400>; + clocks = <&rcc SPDIF_K>; + clock-names = "kclk"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 93 0x400 0x01>, + <&dmamux1 94 0x400 0x01>; + dma-names = "rx", "rx-ctrl"; + status = "disabled"; + }; + usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; @@ -886,6 +899,21 @@ status = "disabled"; }; + ipcc: mailbox@4c001000 { + compatible = "st,stm32mp1-ipcc"; + #mbox-cells = <1>; + reg = <0x4c001000 0x400>; + st,proc-id = <0>; + interrupts-extended = + <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <&exti 61 1>; + interrupt-names = "rx", "tx", "wakeup"; + clocks = <&rcc IPCC>; + wakeup-source; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -903,6 +931,7 @@ syscfg: syscon@50020000 { compatible = "st,stm32mp157-syscfg", "syscon"; reg = <0x50020000 0x400>; + clocks = <&rcc SYSCFG>; }; lptimer2: timer@50021000 { @@ -1050,6 +1079,20 @@ status = "disabled"; }; + sdmmc1: sdmmc@58005000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x58005000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC1_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC1_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + }; + crc1: crc@58009000 { compatible = "st,stm32f7-crc"; reg = <0x58009000 0x400>; @@ -1199,6 +1242,19 @@ status = "disabled"; }; + bsec: nvmem@5c005000 { + compatible = "st,stm32mp15-bsec"; + reg = <0x5c005000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ts_cal1: calib@5c { + reg = <0x5c 0x2>; + }; + ts_cal2: calib@5e { + reg = <0x5e 0x2>; + }; + }; + i2c6: i2c@5c009000 { compatible = "st,stm32f7-i2c"; reg = <0x5c009000 0x400>; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index cf7b392dff31..74262988881c 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -131,20 +131,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -165,10 +151,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 197a1f2b75ff..7306c65df88a 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -184,12 +184,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; }; ®_ahci_5v { @@ -254,9 +248,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index 896e27a08727..8ee3ff42bd55 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -158,20 +158,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -223,10 +209,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index f63767cddd8e..bf2044bac42f 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -86,20 +86,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -121,10 +107,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index 26d0c1d6a02b..ca878384e902 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -164,20 +164,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -233,10 +219,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 71c27ea0b53e..76016f2ca29d 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -150,20 +150,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -209,10 +195,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 2f0d966f39ad..0a562b2cc5bc 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -61,8 +61,6 @@ gpio-keys { compatible = "gpio-keys-polled"; - pinctrl-names = "default"; - pinctrl-0 = <&key_pins_inet9f>; poll-interval = <20>; left-joystick-left { @@ -70,7 +68,7 @@ linux,code = <ABS_X>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */ + gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */ }; left-joystick-right { @@ -78,7 +76,7 @@ linux,code = <ABS_X>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */ + gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */ }; left-joystick-up { @@ -86,7 +84,7 @@ linux,code = <ABS_Y>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ + gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */ }; left-joystick-down { @@ -94,7 +92,7 @@ linux,code = <ABS_Y>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ + gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */ }; right-joystick-left { @@ -102,7 +100,7 @@ linux,code = <ABS_Z>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */ + gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */ }; right-joystick-right { @@ -110,7 +108,7 @@ linux,code = <ABS_Z>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */ + gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */ }; right-joystick-up { @@ -118,7 +116,7 @@ linux,code = <ABS_RZ>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */ + gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */ }; right-joystick-down { @@ -126,7 +124,7 @@ linux,code = <ABS_RZ>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ + gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */ }; dpad-left { @@ -134,7 +132,7 @@ linux,code = <ABS_HAT0X>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */ + gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */ }; dpad-right { @@ -142,7 +140,7 @@ linux,code = <ABS_HAT0X>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */ + gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */ }; dpad-up { @@ -150,7 +148,7 @@ linux,code = <ABS_HAT0Y>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */ + gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */ }; dpad-down { @@ -158,55 +156,55 @@ linux,code = <ABS_HAT0Y>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */ + gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */ }; x { label = "Button X"; linux,code = <BTN_X>; - gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */ + gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */ }; y { label = "Button Y"; linux,code = <BTN_Y>; - gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */ + gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */ }; a { label = "Button A"; linux,code = <BTN_A>; - gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ + gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */ }; b { label = "Button B"; linux,code = <BTN_B>; - gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */ + gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */ }; select { label = "Select Button"; linux,code = <BTN_SELECT>; - gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */ + gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */ }; start { label = "Start Button"; linux,code = <BTN_START>; - gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */ + gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */ }; top-left { label = "Top Left Button"; linux,code = <BTN_TL>; - gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ + gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */ }; top-right { label = "Top Right Button"; linux,code = <BTN_TR>; - gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */ + gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */ }; }; }; @@ -306,30 +304,6 @@ status = "okay"; }; -&pio { - key_pins_inet9f: key-pins { - pins = "PA0", "PA1", "PA3", "PA4", - "PA5", "PA6", "PA8", "PA9", - "PA11", "PA12", "PA13", - "PA14", "PA15", "PA16", "PA17", - "PH22", "PH23", "PH24", "PH25", "PH26"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -375,10 +349,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 0dbf69576512..58ad2ad9041f 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -148,14 +148,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_usb1_vbus { status = "okay"; }; @@ -183,9 +175,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index b74a61496537..a8e537fd4bd6 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -186,18 +186,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -229,10 +217,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index d82a604f3d9c..0f1e781069e9 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -154,14 +154,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -201,9 +193,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */ status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index 84b25be1ac94..24a3d23e1952 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -146,20 +146,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -211,10 +197,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 73c3ac42095f..e88daa4ef1af 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -267,7 +267,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; @@ -342,6 +342,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 14>; ports { @@ -391,6 +392,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 15>; ports { @@ -494,13 +496,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; @@ -517,7 +520,6 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -527,7 +529,6 @@ interrupts = <64>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -607,7 +608,6 @@ interrupts = <40>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -617,7 +617,6 @@ interrupts = <65>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index c88f08984483..8af0eae2ddc1 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -119,12 +119,6 @@ }; &pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG12"; - function = "gpio_in"; - bias-pull-up; - }; - led_pins_t004: led-pin { pins = "PB2"; function = "gpio_out"; @@ -149,9 +143,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 262c2ffbdcfa..5340b4164df2 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -218,12 +218,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG12"; - function = "gpio_in"; - bias-pull-up; - }; }; ®_usb0_vbus { @@ -271,9 +265,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index f3cede9beb63..a23bf24792ec 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -127,20 +127,6 @@ status = "okay"; }; -&pio { - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -195,10 +181,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 9369f7453beb..9b9f2a574851 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -124,14 +124,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -182,9 +174,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts index ca8f3fd1ddfe..ba8d75b3c716 100644 --- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -206,9 +206,8 @@ }; &usbphy { - pinctrl-names = "default"; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_vcc5v0>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 943868e495bc..5df398d77238 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -109,18 +109,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_usb0_vbus { @@ -145,10 +133,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 9409c232d48a..39101228a755 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -74,8 +74,6 @@ bridge { compatible = "dumb-vga-dac"; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; @@ -204,18 +202,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_usb0_vbus { @@ -253,10 +239,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts index 7257f39b31ce..fde559a8b61e 100644 --- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts +++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts @@ -53,16 +53,9 @@ power-supply = <®_vcc3v3>; enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */ backlight = <&backlight>; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&tcon0_out_lcd>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index 732873cbeedc..be486d28d04f 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -58,13 +58,11 @@ /delete-property/stdout-path; }; - i2c_lcd: i2c-gpio { + i2c_lcd: i2c { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_lcd_pins>; - gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */ - <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */ + sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ + scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */ i2c-gpio,delay-us = <5>; }; }; @@ -94,14 +92,6 @@ }; }; -&pio { - i2c_lcd_pins: i2c-lcd-pin { - pins = "PG10", "PG12"; - function = "gpio_out"; - bias-pull-up; - }; -}; - ®_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ }; diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts index 3f70b8c53132..a32cde3e32eb 100644 --- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts @@ -133,8 +133,6 @@ status = "okay"; nand@0 { - #address-cells = <2>; - #size-cells = <2>; reg = <0>; allwinner,rb = <0>; nand-ecc-mode = "hw"; @@ -233,7 +231,7 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_vcc5v0>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 86e46aa59134..d003b895a696 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -325,8 +325,8 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index f4298facf9dc..4bf4943d4eb7 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -84,9 +84,7 @@ onewire { compatible = "w1-gpio"; - gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ - pinctrl-names = "default"; - pinctrl-0 = <&chip_w1_pin>; + gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */ }; }; @@ -173,14 +171,6 @@ status = "okay"; }; -&pio { - chip_w1_pin: chip-w1-pin { - pins = "PD2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; @@ -279,7 +269,7 @@ &usbphy { status = "okay"; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_vcc5v0>; diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 5b1f0e198eb6..1a9926d71410 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -132,20 +132,6 @@ status = "okay"; }; -&pio { - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -198,10 +184,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 5497d985c54a..2fb438c4fe9d 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -127,6 +127,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + dma-ranges; ranges; system-control@1c00000 { @@ -181,6 +182,14 @@ }; }; + mbus: dram-controller@1c01000 { + compatible = "allwinner,sun5i-a13-mbus"; + reg = <0x01c01000 0x1000>; + clocks = <&ccu 99>; + dma-ranges = <0x00000000 0x40000000 0x20000000>; + #interconnect-cells = <1>; + }; + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; @@ -189,7 +198,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; @@ -238,11 +247,8 @@ status = "disabled"; port { - #address-cells = <1>; - #size-cells = <0>; - tve0_in_tcon0: endpoint@0 { - reg = <0>; + tve0_in_tcon0: endpoint { remote-endpoint = <&tcon0_out_tve0>; }; }; @@ -278,6 +284,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; status = "disabled"; ports { @@ -285,12 +292,9 @@ #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_be0: endpoint@0 { - reg = <0>; + tcon0_in_be0: endpoint { remote-endpoint = <&be0_out_tcon0>; }; }; @@ -365,13 +369,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>; reg-names = "phy_ctrl", "pmu1"; clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb_phy"; @@ -386,7 +391,6 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -396,7 +400,6 @@ interrupts = <40>; clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -501,18 +504,18 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2-8bit-pins { + mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", "PC13", - "PC14", "PC15"; + "PC10", "PC11"; function = "mmc2"; drive-strength = <30>; bias-pull-up; }; - mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11"; + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; function = "mmc2"; drive-strength = <30>; bias-pull-up; @@ -536,6 +539,11 @@ function = "nand0"; }; + pwm0_pin: pwm0-pin { + pins = "PB2"; + function = "pwm"; + }; + spi2_pe_pins: spi2-pe-pins { pins = "PE1", "PE2", "PE3"; function = "spi2"; @@ -575,11 +583,6 @@ pins = "PG11", "PG12"; function = "uart3"; }; - - pwm0_pin: pwm0-pin { - pins = "PB2"; - function = "pwm"; - }; }; timer@1c20c00 { @@ -727,6 +730,8 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_DE_FE>; + interconnects = <&mbus 19>; + interconnect-names = "dma-mem"; status = "disabled"; ports { @@ -734,12 +739,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_be0: endpoint@0 { - reg = <0>; + fe0_out_be0: endpoint { remote-endpoint = <&be0_in_fe0>; }; }; @@ -755,6 +757,8 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_DE_BE>; + interconnects = <&mbus 18>; + interconnect-names = "dma-mem"; status = "disabled"; assigned-clocks = <&ccu CLK_DE_BE>; @@ -765,23 +769,17 @@ #size-cells = <0>; be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - be0_in_fe0: endpoint@0 { - reg = <0>; + be0_in_fe0: endpoint { remote-endpoint = <&fe0_out_be0>; }; }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_tcon0: endpoint@0 { - reg = <0>; + be0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_be0>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 0b7bedf85fb9..c3d56dc93513 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -63,10 +63,8 @@ i2c_lcd: i2c { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_lcd_pins>; - gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */ - <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */ + sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */ + scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */ i2c-gpio,delay-us = <5>; }; }; @@ -113,14 +111,6 @@ status = "okay"; }; -&pio { - i2c_lcd_pins: i2c-lcd-pins { - pins = "PA23", "PA24"; - function = "gpio_out"; - bias-pull-up; - }; -}; - ®_usb2_vbus { gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index e17a65b3561e..09832b4e8fc8 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -86,31 +86,23 @@ vga-dac { compatible = "dumb-vga-dac"; vdd-supply = <®_vga_3v3>; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - vga_dac_in: endpoint@0 { - reg = <0>; + vga_dac_in: endpoint { remote-endpoint = <&tcon0_out_vga>; }; }; port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - vga_dac_out: endpoint@0 { - reg = <0>; + vga_dac_out: endpoint { remote-endpoint = <&vga_con_in>; }; }; @@ -335,8 +327,8 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ - usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index 0832ac5ae3ec..091eb2ac53b3 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -157,7 +157,6 @@ &spdif { pinctrl-names = "default"; pinctrl-0 = <&spdif_tx_pin>; - spdif-out = "okay"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 13304b8c5139..c04efad81bbc 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -292,6 +292,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; @@ -340,6 +341,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; @@ -491,8 +493,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -508,6 +508,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -542,7 +543,6 @@ clocks = <&ccu CLK_AHB1_EHCI0>; resets = <&ccu RST_AHB1_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -553,7 +553,6 @@ clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_AHB1_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -564,7 +563,6 @@ clocks = <&ccu CLK_AHB1_EHCI1>; resets = <&ccu RST_AHB1_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -575,7 +573,6 @@ clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_AHB1_OHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -1029,7 +1026,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -1229,12 +1226,9 @@ }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -1259,12 +1253,9 @@ #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; @@ -1380,7 +1371,6 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #size-cells = <0>; #gpio-cells = <3>; s_ir_rx_pin: s-ir-rx-pin { diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 60b355f7184c..bc3170a0b8b5 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -260,7 +260,7 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 86143de21c22..7de2abd541c1 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -73,14 +73,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PA15"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &p2wi { status = "okay"; @@ -173,9 +165,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 81bc85d398c1..4df921632f7a 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -246,12 +246,6 @@ "SPI-MISO", "SPI-CE1", "", "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", "", "", "", "", "", "", "", ""; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; }; #include "axp209.dtsi" @@ -329,9 +323,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 200685b0b1cb..08e5a5abf8cc 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -173,14 +173,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { status = "okay"; }; @@ -236,9 +228,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index f91e1bee44e8..3e170cfac86a 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -229,14 +229,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp209.dtsi" &ac_power_supply { @@ -322,9 +314,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts index 823aabce0462..c34a83f666c7 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts @@ -314,8 +314,8 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 5e411194bf62..e40dd47df8ce 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -174,18 +174,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -217,10 +205,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 4e1c590eb098..95c6f8949076 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -174,23 +174,17 @@ }; &pio { + vcc-pa-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pe-supply = <®_ldo3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_ldo4>; + led_pins_olinuxinolime: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -267,10 +261,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 840ae1194a66..0dcba070444a 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -252,18 +252,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; #include "axp209.dtsi" @@ -355,10 +343,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 15881081cac4..9628041bb3a3 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -176,14 +176,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -239,9 +231,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index d64de2e73a9f..7b3532665c28 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -135,14 +135,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -198,9 +190,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 538ea15fa32f..173b676436e9 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -168,14 +168,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; @@ -226,9 +218,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index a72ed4318d04..14a88aa16a97 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -168,14 +168,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -226,9 +218,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index ffade253d129..6a66b0432dfa 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -156,14 +156,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -223,9 +215,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index c27e56091fb1..f8475a39777b 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -145,14 +145,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -206,9 +198,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 641a8fa6d428..9ad8e445b240 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -333,7 +333,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; @@ -406,6 +406,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 14>; ports { @@ -455,6 +456,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 15>; ports { @@ -586,13 +588,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun7i-a20-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; @@ -609,7 +612,6 @@ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -619,7 +621,6 @@ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -702,7 +703,6 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -712,7 +712,6 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -751,21 +750,31 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + /omit-if-no-ref/ + can_pa_pins: can-pa-pins { + pins = "PA16", "PA17"; + function = "can"; + }; + + /omit-if-no-ref/ can_ph_pins: can-ph-pins { pins = "PH20", "PH21"; function = "can"; }; + /omit-if-no-ref/ clk_out_a_pin: clk-out-a-pin { pins = "PI12"; function = "clk_out_a"; }; + /omit-if-no-ref/ clk_out_b_pin: clk-out-b-pin { pins = "PI13"; function = "clk_out_b"; }; + /omit-if-no-ref/ emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -775,6 +784,17 @@ function = "emac"; }; + /omit-if-no-ref/ + emac_ph_pins: emac-ph-pins { + pins = "PH8", "PH9", "PH10", "PH11", + "PH14", "PH15", "PH16", "PH17", + "PH18", "PH19", "PH20", "PH21", + "PH22", "PH23", "PH24", "PH25", + "PH26"; + function = "emac"; + }; + + /omit-if-no-ref/ gmac_mii_pins: gmac-mii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -784,6 +804,7 @@ function = "gmac"; }; + /omit-if-no-ref/ gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -798,46 +819,55 @@ drive-strength = <40>; }; + /omit-if-no-ref/ i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; + /omit-if-no-ref/ i2c1_pins: i2c1-pins { pins = "PB18", "PB19"; function = "i2c1"; }; + /omit-if-no-ref/ i2c2_pins: i2c2-pins { pins = "PB20", "PB21"; function = "i2c2"; }; + /omit-if-no-ref/ i2c3_pins: i2c3-pins { pins = "PI0", "PI1"; function = "i2c3"; }; + /omit-if-no-ref/ ir0_rx_pin: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; + /omit-if-no-ref/ ir0_tx_pin: ir0-tx-pin { pins = "PB3"; function = "ir0"; }; + /omit-if-no-ref/ ir1_rx_pin: ir1-rx-pin { pins = "PB23"; function = "ir1"; }; + /omit-if-no-ref/ ir1_tx_pin: ir1-tx-pin { pins = "PB22"; function = "ir1"; }; + /omit-if-no-ref/ mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -846,6 +876,7 @@ bias-pull-up; }; + /omit-if-no-ref/ mmc2_pins: mmc2-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; @@ -854,6 +885,7 @@ bias-pull-up; }; + /omit-if-no-ref/ mmc3_pins: mmc3-pins { pins = "PI4", "PI5", "PI6", "PI7", "PI8", "PI9"; @@ -862,127 +894,206 @@ bias-pull-up; }; + /omit-if-no-ref/ ps2_0_pins: ps2-0-pins { pins = "PI20", "PI21"; function = "ps2"; }; + /omit-if-no-ref/ ps2_1_ph_pins: ps2-1-ph-pins { pins = "PH12", "PH13"; function = "ps2"; }; + /omit-if-no-ref/ pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; + /omit-if-no-ref/ pwm1_pin: pwm1-pin { pins = "PI3"; function = "pwm"; }; + /omit-if-no-ref/ spdif_tx_pin: spdif-tx-pin { pins = "PB13"; function = "spdif"; bias-pull-up; }; + /omit-if-no-ref/ spi0_pi_pins: spi0-pi-pins { pins = "PI11", "PI12", "PI13"; function = "spi0"; }; + /omit-if-no-ref/ spi0_cs0_pi_pin: spi0-cs0-pi-pin { pins = "PI10"; function = "spi0"; }; + /omit-if-no-ref/ spi0_cs1_pi_pin: spi0-cs1-pi-pin { pins = "PI14"; function = "spi0"; }; + /omit-if-no-ref/ spi1_pi_pins: spi1-pi-pins { pins = "PI17", "PI18", "PI19"; function = "spi1"; }; + /omit-if-no-ref/ spi1_cs0_pi_pin: spi1-cs0-pi-pin { pins = "PI16"; function = "spi1"; }; + /omit-if-no-ref/ spi2_pb_pins: spi2-pb-pins { pins = "PB15", "PB16", "PB17"; function = "spi2"; }; + /omit-if-no-ref/ spi2_cs0_pb_pin: spi2-cs0-pb-pin { pins = "PB14"; function = "spi2"; }; + /omit-if-no-ref/ spi2_pc_pins: spi2-pc-pins { pins = "PC20", "PC21", "PC22"; function = "spi2"; }; + /omit-if-no-ref/ spi2_cs0_pc_pin: spi2-cs0-pc-pin { pins = "PC19"; function = "spi2"; }; + /omit-if-no-ref/ uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; + /omit-if-no-ref/ + uart0_pf_pins: uart0-pf-pins { + pins = "PF2", "PF4"; + function = "uart0"; + }; + + /omit-if-no-ref/ + uart1_pa_pins: uart1-pa-pins { + pins = "PA10", "PA11"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins { + pins = "PA12", "PA13"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart2_pa_pins: uart2-pa-pins { + pins = "PA2", "PA3"; + function = "uart2"; + }; + + /omit-if-no-ref/ + uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins { + pins = "PA0", "PA1"; + function = "uart2"; + }; + + /omit-if-no-ref/ uart2_pi_pins: uart2-pi-pins { pins = "PI18", "PI19"; function = "uart2"; }; + /omit-if-no-ref/ uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins { pins = "PI16", "PI17"; function = "uart2"; }; + /omit-if-no-ref/ uart3_pg_pins: uart3-pg-pins { pins = "PG6", "PG7"; function = "uart3"; }; + /omit-if-no-ref/ uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { pins = "PG8", "PG9"; function = "uart3"; }; + /omit-if-no-ref/ uart3_ph_pins: uart3-ph-pins { pins = "PH0", "PH1"; function = "uart3"; }; + /omit-if-no-ref/ + uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins { + pins = "PH2", "PH3"; + function = "uart3"; + }; + + /omit-if-no-ref/ uart4_pg_pins: uart4-pg-pins { pins = "PG10", "PG11"; function = "uart4"; }; + /omit-if-no-ref/ uart4_ph_pins: uart4-ph-pins { pins = "PH4", "PH5"; function = "uart4"; }; + /omit-if-no-ref/ + uart5_ph_pins: uart5-ph-pins { + pins = "PH6", "PH7"; + function = "uart5"; + }; + + /omit-if-no-ref/ uart5_pi_pins: uart5-pi-pins { pins = "PI10", "PI11"; function = "uart5"; }; + /omit-if-no-ref/ + uart6_pa_pins: uart6-pa-pins { + pins = "PA12", "PA13"; + function = "uart6"; + }; + + /omit-if-no-ref/ uart6_pi_pins: uart6-pi-pins { pins = "PI12", "PI13"; function = "uart6"; }; + /omit-if-no-ref/ + uart7_pa_pins: uart7-pa-pins { + pins = "PA14", "PA15"; + function = "uart7"; + }; + + /omit-if-no-ref/ uart7_pi_pins: uart7-pi-pins { pins = "PI20", "PI21"; function = "uart7"; @@ -1341,7 +1452,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 43fe215e83ea..af2fa694a467 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -161,14 +161,18 @@ #dma-cells = <1>; }; - nfc: nand@1c03000 { - compatible = "allwinner,sun4i-a10-nand"; + nfc: nand-controller@1c03000 { + compatible = "allwinner,sun8i-a23-nand-controller"; reg = <0x01c03000 0x1000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; resets = <&ccu RST_BUS_NAND>; reset-names = "ahb"; + dmas = <&dma 5>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -183,6 +187,7 @@ clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_LCD>; reset-names = "lcd"; status = "disabled"; @@ -192,19 +197,14 @@ #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_drc0: endpoint@0 { - reg = <0>; + tcon0_in_drc0: endpoint { remote-endpoint = <&drc0_out_tcon0>; }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -279,6 +279,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -306,7 +307,6 @@ clocks = <&ccu CLK_BUS_EHCI>; resets = <&ccu RST_BUS_EHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -317,7 +317,6 @@ clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>; resets = <&ccu RST_BUS_OHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -396,25 +395,25 @@ function = "nand0"; }; - nand_pins_cs0: nand-pins-cs0 { + nand_cs0_pin: nand-cs0-pin { pins = "PC4"; function = "nand0"; bias-pull-up; }; - nand_pins_cs1: nand-pins-cs1 { + nand_cs1_pin: nand-cs1-pin { pins = "PC3"; function = "nand0"; bias-pull-up; }; - nand_pins_rb0: nand-pins-rb0 { + nand_rb0_pin: nand-rb0-pin { pins = "PC6"; function = "nand0"; bias-pull-up; }; - nand_pins_rb1: nand-pins-rb1 { + nand_rb1_pin: nand-rb1-pin { pins = "PC7"; function = "nand0"; bias-pull-up; @@ -602,7 +601,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -627,12 +626,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_be0: endpoint@0 { - reg = <0>; + fe0_out_be0: endpoint { remote-endpoint = <&be0_in_fe0>; }; }; @@ -654,23 +650,17 @@ #size-cells = <0>; be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - be0_in_fe0: endpoint@0 { - reg = <0>; + be0_in_fe0: endpoint { remote-endpoint = <&fe0_out_be0>; }; }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -694,23 +684,17 @@ #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc0_out_tcon0: endpoint@0 { - reg = <0>; + drc0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_drc0>; }; }; @@ -799,6 +783,20 @@ status = "disabled"; }; + r_i2c: i2c@1f02400 { + compatible = "allwinner,sun8i-a23-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01f02400 0x400>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins>; + clocks = <&apb0_gates 6>; + resets = <&apb0_rst 6>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -811,6 +809,12 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + r_i2c_pins: r-i2c-pins { + pins = "PL0", "PL1"; + function = "s_i2c"; + bias-pull-up; + }; + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts index d4dab7c28398..5659c63d7d77 100644 --- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -65,3 +65,9 @@ &panel { compatible = "bananapi,s070wv20-ct16", "simple-panel"; }; + +&tcon0_out { + tcon0_out_lcd: endpoint { + remote-endpoint = <&panel_input>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts index b0bc2360f8c4..9c5750c25613 100644 --- a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts @@ -48,3 +48,10 @@ model = "Q8 A33 Tablet"; compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; }; + +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index f3667268adde..785798e3a104 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -63,16 +63,9 @@ panel { compatible = "netron-dy,e231732"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&tcon0_out_panel>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 1111a6498102..1532a0e59af4 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -265,19 +265,12 @@ phys = <&dphy>; phy-names = "dphy"; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - dsi_in_tcon0: endpoint { - remote-endpoint = <&tcon0_out_dsi>; - }; + port { + dsi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi>; }; }; }; @@ -420,6 +413,9 @@ }; &tcon0_out { + #address-cells = <1>; + #size-cells = <0>; + tcon0_out_dsi: endpoint@1 { reg = <1>; remote-endpoint = <&dsi_in_tcon0>; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 838be7b3715f..9d34eabba121 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -389,7 +389,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index fcbec3d7ccd7..ea299d3d84d0 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -420,7 +420,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 98e8cea26dbe..66d078053d5f 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -46,6 +46,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/input/input.h> / { model = "TBS A711 Tablet"; @@ -98,6 +99,13 @@ }; }; + reg_gps: reg-gps { + compatible = "regulator-fixed"; + regulator-name = "gps"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + reg_vbat: reg-vbat { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -156,6 +164,18 @@ status = "okay"; }; +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */ + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; pinctrl-names = "default"; @@ -200,6 +220,25 @@ status = "okay"; }; +&r_lradc { + vref-supply = <®_aldo2>; + status = "okay"; + + button@210 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <210000>; + }; + + button@410 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <410000>; + }; +}; + &r_rsb { status = "okay"; @@ -391,8 +430,7 @@ }; &tcon0_out { - tcon0_out_lcd: endpoint@0 { - reg = <0>; + tcon0_out_lcd: endpoint { remote-endpoint = <&panel_input>; }; }; @@ -407,7 +445,34 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm20702a1"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vbat>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + max-speed = <1500000>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pb_pins>; status = "okay"; + + gnss { + compatible = "u-blox,neo-6m"; + + v-bckp-supply = <®_rtc_ldo>; + vcc-supply = <®_gps>; + current-speed = <9600>; + }; }; &usb_otg { @@ -418,7 +483,7 @@ &usbphy { usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ usb0_vbus-supply = <®_drivevbus>; - usb1_vbus_supply = <®_vmain>; - usb2_vbus_supply = <®_vmain>; + usb1_vbus-supply = <®_vmain>; + usb2_vbus-supply = <®_vmain>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index b099d2fbb5cd..392b0cabbf0d 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -61,79 +61,91 @@ #size-cells = <0>; cpu0: cpu@0 { - clocks = <&ccu CLK_C0CPUX>; - clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0>; + #cooling-cells = <2>; }; cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <1>; + #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <2>; + #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <3>; + #cooling-cells = <2>; }; cpu100: cpu@100 { - clocks = <&ccu CLK_C1CPUX>; - clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x100>; + #cooling-cells = <2>; }; cpu@101 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x101>; + #cooling-cells = <2>; }; cpu@102 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x102>; + #cooling-cells = <2>; }; cpu@103 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x103>; + #cooling-cells = <2>; }; }; @@ -333,6 +345,11 @@ reg = <0>; remote-endpoint = <&tcon0_in_mixer0>; }; + + mixer0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_mixer0>; + }; }; }; }; @@ -351,9 +368,17 @@ #size-cells = <0>; mixer1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; - mixer1_out_tcon1: endpoint { + mixer1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer1>; + }; + + mixer1_out_tcon1: endpoint@1 { + reg = <1>; remote-endpoint = <&tcon1_in_mixer1>; }; }; @@ -420,6 +445,7 @@ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; @@ -436,11 +462,14 @@ reg = <0>; remote-endpoint = <&mixer0_out_tcon0>; }; + + tcon0_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon0>; + }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -460,9 +489,17 @@ #size-cells = <0>; tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - tcon1_in_mixer1: endpoint { + tcon1_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon1>; + }; + + tcon1_in_mixer1: endpoint@1 { + reg = <1>; remote-endpoint = <&mixer1_out_tcon1>; }; }; @@ -557,6 +594,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -594,7 +632,6 @@ clocks = <&ccu CLK_BUS_EHCI0>; resets = <&ccu RST_BUS_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -606,7 +643,6 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -618,7 +654,6 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -671,6 +706,12 @@ function = "i2c1"; }; + /omit-if-no-ref/ + i2c2_pe_pins: i2c2-pe-pins { + pins = "PE14", "PE15"; + function = "i2c2"; + }; + i2c2_ph_pins: i2c2-ph-pins { pins = "PH4", "PH5"; function = "i2c2"; @@ -742,6 +783,12 @@ pins = "PG8", "PG9"; function = "uart1"; }; + + /omit-if-no-ref/ + uart2_pb_pins: uart2-pb-pins { + pins = "PB0", "PB1"; + function = "uart2"; + }; }; timer@1c20c00 { @@ -847,6 +894,39 @@ status = "disabled"; }; + uart2: serial@1c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@1c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@1c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun8i-a83t-i2c", "allwinner,sun6i-a31-i2c"; @@ -907,7 +987,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -998,6 +1078,13 @@ status = "disabled"; }; + r_lradc: lradc@1f03c00 { + compatible = "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01f03c00 0x100>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 1db2541135a7..78a37a47185a 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -28,7 +28,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pwr_led { label = "bananapi-m2-zero:red:pwr"; @@ -39,7 +38,6 @@ gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; sw4 { label = "power"; @@ -67,8 +65,9 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -115,14 +114,27 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; + }; &usb_otg { diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 84cd9c061227..4970eda2877e 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -178,7 +178,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 25540b7694d5..6277f13f3eb3 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -142,7 +142,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -193,13 +193,13 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts index 2c952eacfef5..ff0a7a952e0c 100644 --- a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts +++ b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts @@ -84,15 +84,14 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; @@ -120,7 +119,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts index 4ec94d72f021..4ba533b0340f 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts @@ -64,7 +64,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; @@ -121,7 +120,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts index 9412668bb888..69243dcb30a6 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts @@ -93,7 +93,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts index 6246d3eff39d..07867a0d569b 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts @@ -105,7 +105,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index f110ee382239..4df29a65316d 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -59,8 +59,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_npi>, <&leds_r_npi>; status { label = "nanopi:blue:status"; @@ -78,8 +76,6 @@ r_gpio_keys { compatible = "gpio-keys"; input-name = "k1"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_npi>; k1 { label = "k1"; @@ -104,28 +100,9 @@ status = "okay"; }; -&pio { - leds_npi: led_pins { - pins = "PA10"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_npi: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_npi: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index f1fc6bdca8be..597c425d08ec 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -75,8 +75,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; status_led { label = "orangepi:red:status"; @@ -92,8 +90,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw2 { label = "sw2"; @@ -110,8 +106,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_orangepi>; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */ }; }; @@ -152,7 +146,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -179,30 +173,6 @@ }; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3", "PL4"; - function = "gpio_in"; - }; - - wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin { - pins = "PL7"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -210,7 +180,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index 476ae8e387ca..6f9c97add54e 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -91,8 +89,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -126,7 +122,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -160,28 +156,9 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 245fd658defb..840849169bed 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -73,8 +73,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -90,8 +88,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -166,25 +162,6 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - ®_usb0_vbus { gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ status = "okay"; @@ -192,7 +169,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 46240334128f..5aff8ecc66cb 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -73,8 +73,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -90,8 +88,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -152,7 +148,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -179,13 +175,6 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - &r_i2c { status = "okay"; @@ -210,18 +199,6 @@ }; }; -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - ®_usb0_vbus { gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ status = "okay"; @@ -229,7 +206,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index ac8438c2cff1..97f497854e05 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -63,8 +63,6 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_pin_a>; regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -116,13 +114,6 @@ bias-pull-up; }; -&pio { - usb3_vbus_pin_a: usb3_vbus_pin { - pins = "PG11"; - function = "gpio_out"; - }; -}; - &r_i2c { status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts index c834048c325e..b8f46e2802fd 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -79,7 +79,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ post-power-on-delay-ms = <200>; }; @@ -135,6 +134,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts b/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts new file mode 100644 index 000000000000..4738f3a9efe4 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Bootlin + * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "RerVision H3-DVK"; + compatible = "rervision,h3-dvk", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 959d265e7254..e37c30e811d3 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -231,3 +231,7 @@ &rtc { compatible = "allwinner,sun8i-h3-rtc"; }; + +&sid { + compatible = "allwinner,sun8i-h3-sid"; +}; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 53104f4ccacc..3d9a1524e17e 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -54,16 +54,9 @@ backlight = <&backlight>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ power-supply = <®_dc1sw>; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&tcon0_out_lcd>; }; }; @@ -120,13 +113,6 @@ status = "okay"; }; -&tcon0_out { - tcon0_out_lcd: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; -}; - &usbphy { usb1_vbus-supply = <®_dldo1>; }; diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts index 32cf1ab33aab..246dec5846a4 100644 --- a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts +++ b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts @@ -34,8 +34,6 @@ /* 2Gb Macronix MX30LF2G18AC (3V) */ nand@0 { - #address-cells = <1>; - #size-cells = <1>; reg = <0>; allwinner,rb = <0>; nand-ecc-mode = "hw"; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 316998e9ec5d..4f48eec6b2ef 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -158,14 +158,6 @@ status = "okay"; }; -&pio { - usb0_id_det: usb0-id-detect-pin { - pins = "PD10"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_rsb { status = "okay"; @@ -314,10 +306,8 @@ &usbphy { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_det>; usb0_vbus-supply = <®_drivevbus>; - usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */ + usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_usb1_vbus>; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 06b685869f52..bb856e53b806 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -273,7 +273,6 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -285,7 +284,6 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -296,7 +294,6 @@ clocks = <&ccu CLK_BUS_EHCI2>; resets = <&ccu RST_BUS_EHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -308,7 +305,6 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -562,9 +558,7 @@ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; resets = <&ccu RST_BUS_SATA>; - resets-name = "ahci"; - #address-cells = <1>; - #size-cells = <0>; + reset-names = "ahci"; status = "disabled"; }; @@ -614,12 +608,9 @@ #size-cells = <0>; tcon_top_mixer0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon_top_mixer0_in_mixer0: endpoint@0 { - reg = <0>; + tcon_top_mixer0_in_mixer0: endpoint { remote-endpoint = <&mixer0_out_tcon_top>; }; }; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 189e479eb95a..b3d8b8f056cd 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -86,14 +86,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH8"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_rsb { status = "okay"; @@ -224,9 +216,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + usb0_id_det-gpios = <&pio 7 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH8 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts index 99c8cf7bb86c..2e4587d26ce5 100644 --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts @@ -96,6 +96,6 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 21e1806ca509..df72b1719c34 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -129,12 +129,9 @@ #size-cells = <0>; mixer0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - mixer0_out_tcon0: endpoint@0 { - reg = <0>; + mixer0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_mixer0>; }; }; @@ -150,6 +147,7 @@ clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>; reset-names = "lcd"; status = "disabled"; @@ -159,12 +157,9 @@ #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_mixer0: endpoint@0 { - reg = <0>; + tcon0_in_mixer0: endpoint { remote-endpoint = <&mixer0_out_tcon0>; }; }; @@ -419,7 +414,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x1000>, <0x01c84000 0x2000>, diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts index bf97f6244c23..f05cabd34b8e 100644 --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -105,6 +105,24 @@ #include "axp22x.dtsi" +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pg_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + ®_aldo3 { regulator-always-on; regulator-min-microvolt = <2700000>; @@ -152,24 +170,6 @@ regulator-name = "vcc-wifi"; }; -&mmc0 { - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ - status = "okay"; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pg_pins>; - vmmc-supply = <®_dldo2>; - vqmmc-supply = <®_dldo1>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; -}; - &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 28c034928d67..18156ffa3ce9 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -89,31 +89,23 @@ vga-dac { compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac"; vdd-supply = <®_dcdc1>; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - vga_dac_in: endpoint@0 { - reg = <0>; + vga_dac_in: endpoint { remote-endpoint = <&tcon0_out_vga>; }; }; port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - vga_dac_out: endpoint@0 { - reg = <0>; + vga_dac_out: endpoint { remote-endpoint = <&vga_con_in>; }; }; @@ -502,8 +494,7 @@ }; &tcon0_out { - tcon0_out_vga: endpoint@0 { - reg = <0>; + tcon0_out_vga: endpoint { remote-endpoint = <&vga_dac_in>; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 864715ec3cb0..2ed28d9e2787 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -82,7 +82,7 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; + regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -91,7 +91,7 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; + regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 6fb292e0b662..0c1eec9000e3 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -289,7 +289,7 @@ status = "disabled"; }; - soc { + soc@20000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -342,7 +342,6 @@ clocks = <&usb_clocks CLK_BUS_HCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; - phy-names = "usb"; status = "disabled"; }; @@ -354,7 +353,6 @@ <&usb_clocks CLK_USB_OHCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; - phy-names = "usb"; status = "disabled"; }; @@ -376,7 +374,6 @@ clocks = <&usb_clocks CLK_BUS_HCI1>; resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; - phy-names = "usb"; status = "disabled"; }; @@ -406,7 +403,6 @@ clocks = <&usb_clocks CLK_BUS_HCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; - phy-names = "usb"; status = "disabled"; }; @@ -418,7 +414,6 @@ <&usb_clocks CLK_USB_OHCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; - phy-names = "usb"; status = "disabled"; }; @@ -527,7 +522,7 @@ }; gic: interrupt-controller@1c41000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c41000 0x1000>, <0x01c42000 0x2000>, <0x01c44000 0x2000>, @@ -596,12 +591,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_deu0: endpoint@0 { - reg = <0>; + fe0_out_deu0: endpoint { remote-endpoint = <&deu0_in_fe0>; }; }; @@ -623,12 +615,9 @@ #size-cells = <0>; fe1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe1_out_deu1: endpoint@0 { - reg = <0>; + fe1_out_deu1: endpoint { remote-endpoint = <&deu1_in_fe1>; }; }; @@ -666,12 +655,9 @@ }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -709,12 +695,9 @@ }; be1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be1_out_drc1: endpoint@0 { - reg = <0>; + be1_out_drc1: endpoint { remote-endpoint = <&drc1_in_be1>; }; }; @@ -738,12 +721,9 @@ #size-cells = <0>; deu0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - deu0_in_fe0: endpoint@0 { - reg = <0>; + deu0_in_fe0: endpoint { remote-endpoint = <&fe0_out_deu0>; }; }; @@ -783,12 +763,9 @@ #size-cells = <0>; deu1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - deu1_in_fe1: endpoint@0 { - reg = <0>; + deu1_in_fe1: endpoint { remote-endpoint = <&fe1_out_deu1>; }; }; @@ -828,23 +805,17 @@ #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc0_out_tcon0: endpoint@0 { - reg = <0>; + drc0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_drc0>; }; }; @@ -868,23 +839,17 @@ #size-cells = <0>; drc1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc1_in_be1: endpoint@0 { - reg = <0>; + drc1_in_be1: endpoint { remote-endpoint = <&be1_out_drc1>; }; }; drc1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc1_out_tcon1: endpoint@0 { - reg = <0>; + drc1_out_tcon1: endpoint { remote-endpoint = <&tcon1_in_drc1>; }; }; @@ -900,25 +865,21 @@ resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>; reset-names = "lcd", "edp"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_drc0: endpoint@0 { - reg = <0>; + tcon0_in_drc0: endpoint { remote-endpoint = <&drc0_out_tcon0>; }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -938,19 +899,14 @@ #size-cells = <0>; tcon1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon1_in_drc1: endpoint@0 { - reg = <0>; + tcon1_in_drc1: endpoint { remote-endpoint = <&drc1_out_tcon1>; }; }; tcon1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -997,15 +953,13 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #size-cells = <0>; #gpio-cells = <3>; gmac_rgmii_pins: gmac-rgmii-pins { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA4", "PA5", "PA7", "PA8", - "PA9", "PA10", "PA12", "PA13", - "PA15", "PA16", "PA17"; - allwinner,function = "gmac"; + pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", + "PA7", "PA8", "PA9", "PA10", "PA12", + "PA13", "PA15", "PA16", "PA17"; + function = "gmac"; /* * data lines in RGMII mode use DDR mode * and need a higher signal drive strength diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index 3bed375b9c03..39263e74fbb5 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -69,7 +69,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pwr_led { label = "bananapi-m2-plus:red:pwr"; @@ -80,7 +79,6 @@ gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; sw4 { label = "power"; @@ -101,7 +99,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ clocks = <&rtc 1>; clock-names = "ext_clock"; @@ -153,7 +150,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -210,7 +207,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index d74a6cbbfdf4..84977d4eb97a 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -227,6 +227,11 @@ #size-cells = <0>; }; + sid: eeprom@1c14000 { + /* compatible is in per SoC .dtsi file */ + reg = <0x1c14000 0x400>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x400>; @@ -237,6 +242,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -298,7 +304,6 @@ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -310,7 +315,6 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -321,7 +325,6 @@ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -333,7 +336,6 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -344,7 +346,6 @@ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; - phy-names = "usb"; status = "disabled"; }; @@ -356,7 +357,6 @@ <&ccu CLK_USB_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; - phy-names = "usb"; status = "disabled"; }; @@ -381,14 +381,14 @@ interrupt-controller; #interrupt-cells = <3>; - csi_pins: csi { + csi_pins: csi-pins { pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11"; function = "csi"; }; - emac_rgmii_pins: emac0 { + emac_rgmii_pins: emac-rgmii-pins { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD7", "PD8", "PD9", "PD10", "PD12", "PD13", "PD15", "PD16", "PD17"; @@ -396,22 +396,22 @@ drive-strength = <40>; }; - i2c0_pins: i2c0 { + i2c0_pins: i2c0-pins { pins = "PA11", "PA12"; function = "i2c0"; }; - i2c1_pins: i2c1 { + i2c1_pins: i2c1-pins { pins = "PA18", "PA19"; function = "i2c1"; }; - i2c2_pins: i2c2 { + i2c2_pins: i2c2-pins { pins = "PE12", "PE13"; function = "i2c2"; }; - mmc0_pins: mmc0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -419,7 +419,7 @@ bias-pull-up; }; - mmc1_pins: mmc1 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -427,7 +427,7 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -437,47 +437,47 @@ bias-pull-up; }; - spdif_tx_pins_a: spdif { + spdif_tx_pin: spdif-tx-pin { pins = "PA17"; function = "spdif"; }; - spi0_pins: spi0 { + spi0_pins: spi0-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; }; - spi1_pins: spi1 { + spi1_pins: spi1-pins { pins = "PA15", "PA16", "PA14", "PA13"; function = "spi1"; }; - uart0_pins_a: uart0 { + uart0_pa_pins: uart0-pa-pins { pins = "PA4", "PA5"; function = "uart0"; }; - uart1_pins: uart1 { + uart1_pins: uart1-pins { pins = "PG6", "PG7"; function = "uart1"; }; - uart1_rts_cts_pins: uart1_rts_cts { + uart1_rts_cts_pins: uart1-rts-cts-pins { pins = "PG8", "PG9"; function = "uart1"; }; - uart2_pins: uart2 { + uart2_pins: uart2-pins { pins = "PA0", "PA1"; function = "uart2"; }; - uart3_pins: uart3 { + uart3_pins: uart3-pins { pins = "PA13", "PA14"; function = "uart3"; }; - uart3_rts_cts_pins: uart3_rts_cts { + uart3_rts_cts_pins: uart3-rts-cts-pins { pins = "PA15", "PA16"; function = "uart3"; }; @@ -855,12 +855,12 @@ interrupt-controller; #interrupt-cells = <3>; - ir_pins_a: ir { + r_ir_rx_pin: r-ir-rx-pin { pins = "PL11"; function = "s_cir_rx"; }; - r_i2c_pins: r-i2c { + r_i2c_pins: r-i2c-pins { pins = "PL0", "PL1"; function = "s_i2c"; }; diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi index 1eadc132390c..19b3b23cfaa8 100644 --- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi @@ -167,7 +167,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -205,7 +205,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi index ca2c3a557895..d18eaf4a4a3a 100644 --- a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi @@ -1,42 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Copyright 2016 Toradex AG + * Copyright 2016-2019 Toradex AG * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index eaee10ef6512..ceb3f6388c7d 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Copyright 2016-2018 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2019 Toradex AG */ /dts-v1/; diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts index 7961eb4bd803..826b776fbe6f 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2016-2018 Toradex AG */ diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index 367eb8c86098..0462ed2dd8b8 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2016-2018 Toradex AG */ @@ -17,6 +17,7 @@ pcie@1003000 { status = "okay"; + avddio-pex-supply = <®_1v05_vdd>; avdd-pex-pll-supply = <®_1v05_vdd>; avdd-pll-erefe-supply = <®_1v05_avdd>; @@ -1796,6 +1797,7 @@ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; + avddio-pex-supply = <®_1v05_vdd>; avdd-pll-erefe-supply = <®_1v05_avdd>; avdd-pll-utmip-supply = <®_1v8_vddio>; @@ -1807,6 +1809,11 @@ }; padctl@7009f000 { + avdd-pll-utmip-supply = <®_1v8_vddio>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + avdd-pex-pll-supply = <®_1v05_vdd>; + hvdd-pex-pll-e-supply = <®_module_3v3>; + pads { usb2 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 13c93cd507d8..d1e8593ef0d9 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Copyright 2016-2018 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2019 Toradex AG */ #include "tegra124.dtsi" @@ -1837,6 +1801,11 @@ }; padctl@7009f000 { + avdd-pll-utmip-supply = <®_1v8_vddio>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + avdd-pex-pll-supply = <®_1v05_vdd>; + hvdd-pex-pll-e-supply = <®_module_3v3>; + pads { usb2 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 33bbb1c5285d..d5fd642f8b77 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1721,6 +1721,11 @@ padctl@7009f000 { status = "okay"; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + pads { usb2 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index a1acd872bcf2..3b10f475037f 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -414,6 +414,11 @@ padctl@7009f000 { status = "okay"; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + pads { usb2 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 4882b61fb680..5d5e6e18bc7b 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -921,6 +921,11 @@ }; padctl@7009f000 { + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + pads { usb2 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index d2b553f76719..e074258d4518 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -370,6 +370,17 @@ reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */ }; + actmon@6000c800 { + compatible = "nvidia,tegra30-actmon"; + reg = <0x6000c800 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_ACTMON>, + <&tegra_car TEGRA30_CLK_EMC>; + clock-names = "actmon", "emc"; + resets = <&tegra_car TEGRA30_CLK_ACTMON>; + reset-names = "actmon"; + }; + gpio: gpio@6000d000 { compatible = "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 445c7dc306b2..9466913693ac 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -29,35 +29,30 @@ label = "zii:green:debug1"; gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; - max-brightness = <1>; }; led-fail { label = "zii:red:fail"; gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; default-state = "off"; - max-brightness = <1>; }; led-status { label = "zii:green:status"; gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; default-state = "off"; - max-brightness = <1>; }; led-debug-a { label = "zii:green:debug_a"; gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; default-state = "off"; - max-brightness = <1>; }; led-debug-b { label = "zii:green:debug_b"; gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; default-state = "off"; - max-brightness = <1>; }; }; @@ -92,9 +87,14 @@ bus-num = <1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dspi1>; - status = "okay"; - - m25p128@0 { + /* + * Some CFU1s come with SPI-NOR chip DNPed, so we leave this + * node disabled by default and rely on bootloader to enable + * it when appropriate. + */ + status = "disabled"; + + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p128", "jedec,spi-nor"; @@ -212,7 +212,7 @@ pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; - pca9554@22 { + io-expander@22 { compatible = "nxp,pca9554"; reg = <0x22>; gpio-controller; @@ -223,19 +223,23 @@ reg = <0x48>; }; - at24c04@52 { + eeprom@52 { compatible = "atmel,24c04"; reg = <0x52>; label = "nvm"; }; - at24c04@54 { + eeprom@54 { compatible = "atmel,24c04"; reg = <0x54>; label = "nameplate"; }; }; +&snvsrtc { + status = "disabled"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index bd79e00bf615..48086c5e8549 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -1,45 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2015, 2016 Zodiac Inflight Innovations - * - * Based on an original 'vf610-twr.dts' which is Copyright 2015, - * Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -334,11 +295,11 @@ gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH + cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW &gpio1 8 GPIO_ACTIVE_HIGH>; num-chipselects = <2>; - m25p128@0 { + flash@0 { compatible = "m25p128", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -367,7 +328,7 @@ pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; - gpio5: pca9554@20 { + gpio5: io-expander@20 { compatible = "nxp,pca9554"; reg = <0x20>; gpio-controller; @@ -375,7 +336,7 @@ }; - gpio6: pca9554@22 { + gpio6: io-expander@22 { compatible = "nxp,pca9554"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pca9554_22>; @@ -408,7 +369,7 @@ #size-cells = <0>; reg = <0>; - sfp1: at24c04@50 { + sfp1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; }; @@ -419,7 +380,7 @@ #size-cells = <0>; reg = <1>; - sfp2: at24c04@50 { + sfp2: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; }; @@ -430,7 +391,7 @@ #size-cells = <0>; reg = <2>; - sfp3: at24c04@50 { + sfp3: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; }; @@ -441,7 +402,7 @@ #size-cells = <0>; reg = <3>; - sfp4: at24c04@50 { + sfp4: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 6f4a5602cefd..778e02c000d1 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -1,45 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2015, 2016 Zodiac Inflight Innovations - * - * Based on an original 'vf610-twr.dts' which is Copyright 2015, - * Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -277,7 +238,7 @@ status = "okay"; spi-num-chipselects = <2>; - m25p128@0 { + flash@0 { compatible = "m25p128", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -313,7 +274,7 @@ * P1 - WE2_CMD * P2 - WE2_CLK */ - gpio5: pca9557@18 { + gpio5: io-expander@18 { compatible = "nxp,pca9557"; reg = <0x18>; gpio-controller; @@ -361,7 +322,7 @@ * IO0 - WE1_CLK * IO1 - WE1_CMD */ - gpio7: pca9554@22 { + gpio7: io-expander@22 { compatible = "nxp,pca9554"; reg = <0x22>; gpio-controller; @@ -371,7 +332,7 @@ }; &i2c1 { - at24mac602@50 { + eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; read-only; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 19eb4a849efb..0507e6dcbb21 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -138,7 +138,7 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; pinctrl-1 = <&pinctrl_i2c0_gpio>; - scl-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -147,12 +147,12 @@ reg = <0x48>; }; - at24c04@50 { + eeprom@50 { compatible = "atmel,24c04"; reg = <0x50>; }; - at24c04@52 { + eeprom@52 { compatible = "atmel,24c04"; reg = <0x52>; }; diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index de6dfa57bec5..d7019e89f588 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -505,14 +505,14 @@ pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; - gpio5: pca9554@20 { + gpio5: io-expander@20 { compatible = "nxp,pca9554"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; }; - gpio6: pca9554@22 { + gpio6: io-expander@22 { compatible = "nxp,pca9554"; reg = <0x22>; gpio-controller; @@ -524,12 +524,12 @@ reg = <0x48>; }; - at24c04@50 { + eeprom@50 { compatible = "atmel,24c04"; reg = <0x50>; }; - at24c04@52 { + eeprom@52 { compatible = "atmel,24c04"; reg = <0x52>; }; @@ -577,7 +577,7 @@ reg = <0x4f>; }; - gpio7: pca9555@23 { + gpio7: io-expander@23 { compatible = "nxp,pca9555"; gpio-controller; #gpio-cells = <2>; @@ -671,6 +671,10 @@ }; }; +&snvsrtc { + status = "disabled"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts new file mode 100644 index 000000000000..9dde83ccb9d1 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Device tree file for ZII's SPB4 board + * + * SPB - Seat Power Box + * + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SPB4 Board"; + compatible = "zii,vf610spb4", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + no-sdio; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; + reg = <0>; + eeprom-length = <65536>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_1"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_1000_3"; + }; + + port@4 { + reg = <4>; + label = "eth_cu_1000_4"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_5"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_6"; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + io-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "nameplate"; + }; + + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&snvsrtc { + status = "disabled"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&wdoga5 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x31c2 + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + VF610_PAD_PTA30__UART3_TX 0x21a2 + VF610_PAD_PTA31__UART3_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts index 2b10672fadbd..847c5858fea1 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -37,7 +37,6 @@ label = "zii:green:debug1"; gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; - max-brightness = <1>; }; }; @@ -211,6 +210,10 @@ }; }; +&snvsrtc { + status = "disabled"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index 0d9fe5ac83a3..453fce80f858 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -37,7 +37,6 @@ label = "zii:green:debug1"; gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; - max-brightness = <1>; }; }; @@ -70,7 +69,7 @@ */ status = "disabled"; - m25p128@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p128", "jedec,spi-nor"; @@ -195,7 +194,7 @@ pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; - gpio6: pca9505@22 { + gpio6: io-expander@22 { compatible = "nxp,pca9554"; reg = <0x22>; gpio-controller; @@ -207,18 +206,22 @@ reg = <0x48>; }; - at24c04@50 { + eeprom@50 { compatible = "atmel,24c04"; reg = <0x50>; label = "nameplate"; }; - at24c04@52 { + eeprom@52 { compatible = "atmel,24c04"; reg = <0x52>; }; }; +&snvsrtc { + status = "disabled"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -250,6 +253,10 @@ }; }; +&wdoga5 { + status = "disabled"; +}; + &iomuxc { pinctrl_dspi1: dspi1grp { fsl,pins = < diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index d635edfb6ff2..c95c54284da2 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -9,7 +9,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_EXYNOS3=y -CONFIG_EXYNOS5420_MCPM=y CONFIG_SMP=y CONFIG_BIG_LITTLE=y CONFIG_NR_CPUS=8 diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index b7b1cd00a294..6b748f214eae 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -5,10 +5,6 @@ CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_CMDLINE_PARTITION=y CONFIG_ARCH_VIRT=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_ARTPEC=y @@ -33,7 +29,6 @@ CONFIG_MACH_BERLIN_BG2CD=y CONFIG_MACH_BERLIN_BG2Q=y CONFIG_ARCH_DIGICOLOR=y CONFIG_ARCH_EXYNOS=y -CONFIG_EXYNOS5420_MCPM=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_HISI=y CONFIG_ARCH_HI3xxx=y @@ -48,8 +43,8 @@ CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y CONFIG_SOC_IMX6SX=y CONFIG_SOC_IMX6UL=y -CONFIG_SOC_IMX7D=y CONFIG_SOC_LS1021A=y +CONFIG_SOC_IMX7D=y CONFIG_SOC_VF610=y CONFIG_ARCH_KEYSTONE=y CONFIG_ARCH_MEDIATEK=y @@ -76,24 +71,6 @@ CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_RENESAS=y -CONFIG_ARCH_EMEV2=y -CONFIG_ARCH_R7S72100=y -CONFIG_ARCH_R7S9210=y -CONFIG_ARCH_R8A73A4=y -CONFIG_ARCH_R8A7740=y -CONFIG_ARCH_R8A7743=y -CONFIG_ARCH_R8A7744=y -CONFIG_ARCH_R8A7745=y -CONFIG_ARCH_R8A77470=y -CONFIG_ARCH_R8A7778=y -CONFIG_ARCH_R8A7779=y -CONFIG_ARCH_R8A7790=y -CONFIG_ARCH_R8A7791=y -CONFIG_ARCH_R8A7792=y -CONFIG_ARCH_R8A7793=y -CONFIG_ARCH_R8A7794=y -CONFIG_ARCH_R9A06G032=y -CONFIG_ARCH_SH73A0=y CONFIG_ARCH_SOCFPGA=y CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR13XX=y @@ -109,16 +86,6 @@ CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VEXPRESS_TC2_PM=y CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MVEBU=y -CONFIG_PCI_TEGRA=y -CONFIG_PCI_RCAR_GEN2=y -CONFIG_PCIE_RCAR=y -CONFIG_PCI_DRA7XX_EP=y -CONFIG_PCI_KEYSTONE=y -CONFIG_PCI_ENDPOINT=y -CONFIG_PCI_ENDPOINT_CONFIGFS=y -CONFIG_PCI_EPF_TEST=m CONFIG_SMP=y CONFIG_NR_CPUS=16 CONFIG_SECCOMP=y @@ -141,6 +108,29 @@ CONFIG_ARM_CPUIDLE=y CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_KERNEL_MODE_NEON=y +CONFIG_RASPBERRYPI_FIRMWARE=y +CONFIG_TRUSTED_FOUNDATIONS=y +CONFIG_BCM47XX_NVRAM=y +CONFIG_BCM47XX_SPROM=y +CONFIG_EFI_VARS=m +CONFIG_EFI_CAPSULE_LOADER=m +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA1_ARM_CE=m +CONFIG_CRYPTO_SHA2_ARM_CE=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +CONFIG_CRYPTO_AES_ARM_CE=m +CONFIG_CRYPTO_GHASH_ARM_CE=m +CONFIG_CRYPTO_CRC32_ARM_CE=m +CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_GCC_PLUGINS=y +CONFIG_GCC_PLUGIN_STRUCTLEAK=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_CMDLINE_PARTITION=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -175,14 +165,27 @@ CONFIG_MAC80211=m CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MVEBU=y +CONFIG_PCI_TEGRA=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PCIE_RCAR=y +CONFIG_PCI_DRA7XX_EP=y +CONFIG_PCI_KEYSTONE=y +CONFIG_PCI_ENDPOINT=y +CONFIG_PCI_ENDPOINT_CONFIGFS=y +CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_M25P80=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_DENALI_DT=y @@ -195,7 +198,6 @@ CONFIG_MTD_NAND_BRCMNAND=y CONFIG_MTD_NAND_VF610_NFC=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y -CONFIG_SPI_FSL_QUADSPI=m CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y @@ -230,7 +232,6 @@ CONFIG_VIRTIO_NET=y CONFIG_B53_SPI_DRIVER=m CONFIG_B53_MDIO_DRIVER=m CONFIG_B53_MMAP_DRIVER=m -CONFIG_B53_SRAB_DRIVER=m CONFIG_NET_DSA_BCM_SF2=m CONFIG_SUN4I_EMAC=y CONFIG_BCMGENET=m @@ -259,7 +260,6 @@ CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y -CONFIG_REALTEK_PHY=y CONFIG_ROCKCHIP_PHY=y CONFIG_SMSC_PHY=y CONFIG_USB_PEGASUS=y @@ -288,6 +288,7 @@ CONFIG_MOUSE_ELAN_I2C=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADC=m CONFIG_TOUCHSCREEN_ATMEL_MXT=m +CONFIG_TOUCHSCREEN_ELAN=m CONFIG_TOUCHSCREEN_MMS114=m CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_TOUCHSCREEN_ST1232=m @@ -299,6 +300,7 @@ CONFIG_INPUT_MAX8997_HAPTIC=m CONFIG_INPUT_CPCAP_PWRBUTTON=m CONFIG_INPUT_AXP20X_PEK=m CONFIG_INPUT_ADXL34X=m +CONFIG_INPUT_STPMIC1_ONKEY=y CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -349,6 +351,8 @@ CONFIG_SERIAL_DEV_BUS=y CONFIG_VIRTIO_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_ST=y +CONFIG_TCG_TPM=m +CONFIG_TCG_TIS_I2C_INFINEON=m CONFIG_I2C_CHARDEV=y CONFIG_I2C_ARB_GPIO_CHALLENGE=m CONFIG_I2C_MUX_PCA954x=y @@ -386,6 +390,7 @@ CONFIG_SPI_BCM2835=y CONFIG_SPI_BCM2835AUX=y CONFIG_SPI_CADENCE=y CONFIG_SPI_DAVINCI=y +CONFIG_SPI_FSL_QUADSPI=m CONFIG_SPI_GPIO=m CONFIG_SPI_FSL_DSPI=m CONFIG_SPI_OMAP24XX=y @@ -444,9 +449,11 @@ CONFIG_POWER_RESET_RMOBILE=y CONFIG_BATTERY_ACT8945A=y CONFIG_BATTERY_CPCAP=m CONFIG_BATTERY_SBS=y +CONFIG_BATTERY_BQ27XXX=m CONFIG_AXP20X_POWER=m CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m +CONFIG_CHARGER_GPIO=m CONFIG_CHARGER_CPCAP=m CONFIG_CHARGER_MAX14577=m CONFIG_CHARGER_MAX77693=m @@ -486,6 +493,7 @@ CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_RENESAS_WDT=m +CONFIG_STPMIC1_WATCHDOG=y CONFIG_BCM47XX_WDT=y CONFIG_BCM2835_WDT=y CONFIG_BCM_KONA_WDT=y @@ -505,6 +513,7 @@ CONFIG_MFD_AXP20X_RSB=y CONFIG_MFD_CROS_EC=m CONFIG_CROS_EC_I2C=m CONFIG_CROS_EC_SPI=m +CONFIG_MFD_CROS_EC_CHARDEV=m CONFIG_MFD_DA9063=m CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77686=y @@ -527,6 +536,7 @@ CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_MFD_STM32_LPTIMER=m +CONFIG_MFD_STPMIC1=y CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_ACT8945A=y CONFIG_REGULATOR_ANATOP=y @@ -559,6 +569,7 @@ CONFIG_REGULATOR_RN5T618=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_STM32_VREFBUF=m +CONFIG_REGULATOR_STPMIC1=y CONFIG_REGULATOR_TI_ABB=y CONFIG_REGULATOR_TPS51632=y CONFIG_REGULATOR_TPS62360=y @@ -579,8 +590,6 @@ CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_STM32_DCMI=m -CONFIG_SOC_CAMERA=m -CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m CONFIG_VIDEO_S5P_FIMC=m CONFIG_VIDEO_S5P_MIPI_CSIS=m @@ -626,10 +635,12 @@ CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_SUN4I=m CONFIG_DRM_FSL_DCU=m CONFIG_DRM_TEGRA=y -CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m -CONFIG_DRM_PANEL_RAYDIUM_RM68200=m +CONFIG_DRM_STM=m +CONFIG_DRM_STM_DSI=m CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_SAMSUNG_LD9040=m +CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m +CONFIG_DRM_PANEL_RAYDIUM_RM68200=m CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m CONFIG_DRM_DUMB_VGA_DAC=m @@ -641,8 +652,6 @@ CONFIG_DRM_TOSHIBA_TC358764=m CONFIG_DRM_I2C_ADV7511=m CONFIG_DRM_I2C_ADV7511_AUDIO=y CONFIG_DRM_STI=m -CONFIG_DRM_STM=m -CONFIG_DRM_STM_DSI=m CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m CONFIG_DRM_MXSFB=m @@ -701,7 +710,6 @@ CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_SPDIF=m CONFIG_SND_SOC_STI_SAS=m CONFIG_SND_SOC_WM8978=m -CONFIG_SND_SIMPLE_SCU_CARD=m CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y @@ -877,7 +885,6 @@ CONFIG_UNIPHIER_MDMAC=y CONFIG_XILINX_DMA=y CONFIG_QCOM_BAM_DMA=y CONFIG_DW_DMAC=y -CONFIG_SH_DMAE=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=m CONFIG_VIRTIO_PCI=y @@ -910,6 +917,24 @@ CONFIG_QCOM_GSBI=y CONFIG_QCOM_PM=y CONFIG_QCOM_SMD_RPM=m CONFIG_QCOM_WCNSS_CTRL=m +CONFIG_ARCH_EMEV2=y +CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R7S9210=y +CONFIG_ARCH_R8A73A4=y +CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7743=y +CONFIG_ARCH_R8A7744=y +CONFIG_ARCH_R8A7745=y +CONFIG_ARCH_R8A77470=y +CONFIG_ARCH_R8A7778=y +CONFIG_ARCH_R8A7779=y +CONFIG_ARCH_R8A7790=y +CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7792=y +CONFIG_ARCH_R8A7793=y +CONFIG_ARCH_R8A7794=y +CONFIG_ARCH_R9A06G032=y +CONFIG_ARCH_SH73A0=y CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y @@ -925,6 +950,7 @@ CONFIG_AT91_SAMA5D2_ADC=m CONFIG_BERLIN2_ADC=m CONFIG_CPCAP_ADC=m CONFIG_EXYNOS_ADC=m +CONFIG_MESON_SARADC=m CONFIG_STM32_ADC_CORE=m CONFIG_STM32_ADC=m CONFIG_STM32_DFSDM_ADC=m @@ -932,8 +958,12 @@ CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y CONFIG_STM32_LPTIMER_CNT=m CONFIG_STM32_DAC=m +CONFIG_ROCKCHIP_SARADC=m +CONFIG_IIO_CROS_EC_SENSORS_CORE=m +CONFIG_IIO_CROS_EC_SENSORS=m CONFIG_MPU3050_I2C=y CONFIG_CM36651=m +CONFIG_IIO_CROS_EC_LIGHT_PROX=m CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y CONFIG_AK8975=y @@ -969,24 +999,21 @@ CONFIG_PHY_RCAR_GEN2=m CONFIG_PHY_ROCKCHIP_DP=m CONFIG_PHY_ROCKCHIP_USB=y CONFIG_PHY_SAMSUNG_USB2=m +CONFIG_PHY_UNIPHIER_USB2=y +CONFIG_PHY_UNIPHIER_USB3=y CONFIG_PHY_MIPHY28LP=y CONFIG_PHY_STIH407_USB=y CONFIG_PHY_STM32_USBPHYC=y CONFIG_PHY_TEGRA_XUSB=y CONFIG_PHY_DM816X_USB=m -CONFIG_PHY_UNIPHIER_USB3=y -CONFIG_PHY_UNIPHIER_USB2=y CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y CONFIG_TWL4030_USB=m +CONFIG_MESON_MX_EFUSE=m +CONFIG_ROCKCHIP_EFUSE=m CONFIG_NVMEM_IMX_OCOTP=y CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_VF610_OCOTP=y -CONFIG_RASPBERRYPI_FIRMWARE=y -CONFIG_BCM47XX_NVRAM=y -CONFIG_BCM47XX_SPROM=y -CONFIG_EFI_VARS=m -CONFIG_EFI_CAPSULE_LOADER=m CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -1008,8 +1035,6 @@ CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m @@ -1023,16 +1048,6 @@ CONFIG_CRYPTO_DEV_ATMEL_TDES=m CONFIG_CRYPTO_DEV_ATMEL_SHA=m CONFIG_CRYPTO_DEV_SUN4I_SS=m CONFIG_CRYPTO_DEV_ROCKCHIP=m -CONFIG_ARM_CRYPTO=y -CONFIG_CRYPTO_SHA1_ARM_NEON=m -CONFIG_CRYPTO_SHA1_ARM_CE=m -CONFIG_CRYPTO_SHA2_ARM_CE=m -CONFIG_CRYPTO_SHA512_ARM=m -CONFIG_CRYPTO_AES_ARM=m -CONFIG_CRYPTO_AES_ARM_BS=m -CONFIG_CRYPTO_AES_ARM_CE=m -CONFIG_CRYPTO_GHASH_ARM_CE=m -CONFIG_CRYPTO_CRC32_ARM_CE=m -CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_GCC_PLUGINS=y -CONFIG_GCC_PLUGIN_STRUCTLEAK=y +CONFIG_CMA_SIZE_MBYTES=64 +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 4c50b5337cf6..c1854751c99a 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -50,7 +50,8 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set -CONFIG_CFG80211=y +CONFIG_CFG80211=m +CONFIG_MAC80211=m CONFIG_RFKILL=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -72,6 +73,8 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=m CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_ATL1C=y @@ -85,6 +88,7 @@ CONFIG_SLIP_MODE_SLIP6=y CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_WCN36XX=m CONFIG_BRCMFMAC=m CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -94,6 +98,8 @@ CONFIG_KEYBOARD_PMIC8XXX=y CONFIG_INPUT_JOYSTICK=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y +CONFIG_INPUT_MSM_VIBRATOR=m +CONFIG_INPUT_PM8941_PWRKEY=m CONFIG_INPUT_PM8XXX_VIBRATOR=y CONFIG_INPUT_PMIC8XXX_PWRKEY=y CONFIG_INPUT_UINPUT=y @@ -127,6 +133,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y CONFIG_CHARGER_QCOM_SMBB=y +CONFIG_CHARGER_BQ24190=m CONFIG_THERMAL=y CONFIG_QCOM_TSENS=y CONFIG_MFD_PM8XXX=y @@ -226,7 +233,11 @@ CONFIG_IIO=y CONFIG_IIO_BUFFER_CB=y CONFIG_IIO_SW_TRIGGER=y CONFIG_KXSD9=y +CONFIG_QCOM_SPMI_IADC=m +CONFIG_QCOM_SPMI_VADC=m CONFIG_MPU3050_I2C=y +CONFIG_INV_MPU6050_I2C=m +CONFIG_TSL2772=m CONFIG_AK8975=y CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_BMP280=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 9b0efac101ab..eb02ba9ec6e6 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -43,11 +43,13 @@ CONFIG_PCI_RCAR_GEN2=y CONFIG_PCIE_RCAR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=64 CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_EEPROM_AT24=y @@ -123,7 +125,6 @@ CONFIG_VIDEO_ADV7604=y CONFIG_VIDEO_ML86V7667=y CONFIG_DRM=y CONFIG_DRM_RCAR_DU=y -CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_DUMB_VGA_DAC=y CONFIG_DRM_SII902X=y CONFIG_DRM_I2C_ADV7511=y @@ -141,12 +142,13 @@ CONFIG_SND_SOC_RCAR=y CONFIG_SND_SOC_AK4642=y CONFIG_SND_SOC_SGTL5000=y CONFIG_SND_SOC_WM8978=y -CONFIG_SND_SIMPLE_SCU_CARD=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PLATFORM=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_R8A66597_HCD=y CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_GADGET=y @@ -197,6 +199,7 @@ CONFIG_PWM_RENESAS_TPU=y CONFIG_RESET_CONTROLLER=y CONFIG_GENERIC_PHY=y CONFIG_PHY_RCAR_GEN2=y +CONFIG_PHY_RCAR_GEN3_USB2=y # CONFIG_DNOTIFY is not set CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y @@ -209,6 +212,8 @@ CONFIG_NFS_V4_1=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_KERNEL=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index c7b99ebf5fcf..8f5c6a5b444c 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y @@ -14,23 +15,9 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y -CONFIG_PCI_TEGRA=y CONFIG_SMP=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_CMA=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_KEXEC=y @@ -40,6 +27,13 @@ CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_TRUSTED_FOUNDATIONS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -73,10 +67,12 @@ CONFIG_MAC80211=y CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=y +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MSI=y +CONFIG_PCI_TEGRA=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=64 CONFIG_TEGRA_GMI=y CONFIG_MTD=y CONFIG_MTD_M25P80=y @@ -152,7 +148,6 @@ CONFIG_WATCHDOG=y CONFIG_TEGRA_WATCHDOG=y CONFIG_MFD_AS3722=y CONFIG_MFD_CROS_EC=y -CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y CONFIG_MFD_STMPE=y CONFIG_MFD_PALMAS=y @@ -180,6 +175,7 @@ CONFIG_DRM_NOUVEAU=m CONFIG_DRM_TEGRA=y CONFIG_DRM_PANEL_SIMPLE=y # CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -288,6 +284,10 @@ CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRC_CCITT=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y @@ -300,5 +300,3 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRC_CCITT=y diff --git a/arch/arm/firmware/Kconfig b/arch/arm/firmware/Kconfig deleted file mode 100644 index ad396af68e47..000000000000 --- a/arch/arm/firmware/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ -config ARCH_SUPPORTS_FIRMWARE - bool - -config ARCH_SUPPORTS_TRUSTED_FOUNDATIONS - bool - select ARCH_SUPPORTS_FIRMWARE - -menu "Firmware options" - depends on ARCH_SUPPORTS_FIRMWARE - -config TRUSTED_FOUNDATIONS - bool "Trusted Foundations secure monitor support" - depends on ARCH_SUPPORTS_TRUSTED_FOUNDATIONS - default y - help - Some devices (including most Tegra-based consumer devices on the - market) are booted with the Trusted Foundations secure monitor - active, requiring some core operations to be performed by the secure - monitor instead of the kernel. - - This option allows the kernel to invoke the secure monitor whenever - required on devices using Trusted Foundations. See - arch/arm/include/asm/trusted_foundations.h or the - tlm,trusted-foundations device tree binding documentation for details - on how to use it. - - Say n if you don't know what this is about. - -endmenu diff --git a/arch/arm/firmware/Makefile b/arch/arm/firmware/Makefile deleted file mode 100644 index 6e41336b0bc4..000000000000 --- a/arch/arm/firmware/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o - -# tf_generic_smc() fails to build with -fsanitize-coverage=trace-pc -KCOV_INSTRUMENT := n diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h index 34c1d96ef46d..6698272bbcbf 100644 --- a/arch/arm/include/asm/firmware.h +++ b/arch/arm/include/asm/firmware.h @@ -24,7 +24,7 @@ struct firmware_ops { /* * Inform the firmware we intend to enter CPU idle mode */ - int (*prepare_idle)(void); + int (*prepare_idle)(unsigned long mode); /* * Enters CPU idle mode */ diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index ff097ecfa451..51a892702e27 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -29,6 +29,7 @@ #include <linux/platform_data/spi-davinci.h> #include <linux/platform_data/usb-davinci.h> #include <linux/platform_data/ti-aemif.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/nvmem-provider.h> @@ -53,14 +54,50 @@ static const short da830_evm_usb11_pins[] = { -1 }; -static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = { +static struct regulator_consumer_supply da830_evm_usb_supplies[] = { + REGULATOR_SUPPLY("vbus", NULL), +}; + +static struct regulator_init_data da830_evm_usb_vbus_data = { + .consumer_supplies = da830_evm_usb_supplies, + .num_consumer_supplies = ARRAY_SIZE(da830_evm_usb_supplies), +}; + +static struct fixed_voltage_config da830_evm_usb_vbus = { + .supply_name = "vbus", + .microvolts = 33000000, + .init_data = &da830_evm_usb_vbus_data, +}; + +static struct platform_device da830_evm_usb_vbus_device = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &da830_evm_usb_vbus, + }, +}; + +static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = { .dev_id = "ohci-da8xx", .table = { - GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0), GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0), + { } }, }; +static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0), + { } + }, +}; + +static struct gpiod_lookup_table *da830_evm_usb_gpio_lookups[] = { + &da830_evm_usb_oc_gpio_lookup, + &da830_evm_usb_vbus_gpio_lookup, +}; + static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = { /* TPS2065 switch @ 5V */ .potpgt = (3 + 1) / 2, /* 3 ms max */ @@ -75,6 +112,9 @@ static __init void da830_evm_usb_init(void) pr_warn("%s: USB PHY CLK registration failed: %d\n", __func__, ret); + gpiod_add_lookup_tables(da830_evm_usb_gpio_lookups, + ARRAY_SIZE(da830_evm_usb_gpio_lookups)); + ret = da8xx_register_usb_phy(); if (ret) pr_warn("%s: USB PHY registration failed: %d\n", @@ -100,7 +140,11 @@ static __init void da830_evm_usb_init(void) return; } - gpiod_add_lookup_table(&da830_evm_usb_gpio_lookup); + ret = platform_device_register(&da830_evm_usb_vbus_device); + if (ret) { + pr_warn("%s: Unable to register the vbus supply\n", __func__); + return; + } ret = da8xx_register_usb11(&da830_evm_usb11_pdata); if (ret) @@ -156,6 +200,7 @@ static struct gpiod_lookup_table mmc_gpios_table = { GPIO_ACTIVE_LOW), GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_LOW), + { } }, }; diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1fdc9283a8c5..4ee65a8a3b80 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -784,6 +784,7 @@ static struct gpiod_lookup_table mmc_gpios_table = { GPIO_ACTIVE_LOW), GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_HIGH), + { } }, }; diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 64d81fc86f14..5113273fda69 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -121,6 +121,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = { GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + { } }, }; diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index de15f782816e..9d87d4e440ea 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -663,6 +663,7 @@ static struct gpiod_lookup_table i2c_recovery_gpiod_table = { GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + { } }, }; diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 0896af2bed24..db177a6a7e48 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -21,6 +21,7 @@ #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> #include <linux/platform_data/ti-aemif.h> +#include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <asm/mach-types.h> @@ -298,14 +299,50 @@ static const short da850_hawk_usb11_pins[] = { -1 }; -static struct gpiod_lookup_table hawk_usb_gpio_lookup = { +static struct regulator_consumer_supply hawk_usb_supplies[] = { + REGULATOR_SUPPLY("vbus", NULL), +}; + +static struct regulator_init_data hawk_usb_vbus_data = { + .consumer_supplies = hawk_usb_supplies, + .num_consumer_supplies = ARRAY_SIZE(hawk_usb_supplies), +}; + +static struct fixed_voltage_config hawk_usb_vbus = { + .supply_name = "vbus", + .microvolts = 3300000, + .init_data = &hawk_usb_vbus_data, +}; + +static struct platform_device hawk_usb_vbus_device = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &hawk_usb_vbus, + }, +}; + +static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = { .dev_id = "ohci-da8xx", .table = { - GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0), GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0), + { } }, }; +static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0), + { } + }, +}; + +static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = { + &hawk_usb_oc_gpio_lookup, + &hawk_usb_vbus_gpio_lookup, +}; + static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = { /* TPS2087 switch @ 5V */ .potpgt = (3 + 1) / 2, /* 3 ms max */ @@ -326,12 +363,19 @@ static __init void omapl138_hawk_usb_init(void) pr_warn("%s: USB PHY CLK registration failed: %d\n", __func__, ret); + gpiod_add_lookup_tables(hawk_usb_gpio_lookups, + ARRAY_SIZE(hawk_usb_gpio_lookups)); + ret = da8xx_register_usb_phy(); if (ret) pr_warn("%s: USB PHY registration failed: %d\n", __func__, ret); - gpiod_add_lookup_table(&hawk_usb_gpio_lookup); + ret = platform_device_register(&hawk_usb_vbus_device); + if (ret) { + pr_warn("%s: Unable to register the vbus supply\n", __func__); + return; + } ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata); if (ret) diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index bda6c3a5c923..5d3a3e302012 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -15,7 +15,7 @@ #include <linux/platform_device.h> #include <linux/sizes.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index d2eee707d27f..b9f523d9dc8c 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -20,8 +20,9 @@ #include <linux/io.h> #include <linux/spinlock.h> #include <linux/clkdev.h> +#include <linux/soc/cirrus/ep93xx.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/div64.h> diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 706515faee06..cc1382f879af 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -39,11 +39,13 @@ #include <linux/usb/ohci_pdriver.h> #include <linux/random.h> -#include <mach/hardware.h> +#include "hardware.h" #include <linux/platform_data/video-ep93xx.h> #include <linux/platform_data/keypad-ep93xx.h> #include <linux/platform_data/spi-ep93xx.h> -#include <mach/gpio-ep93xx.h> +#include <linux/soc/cirrus/ep93xx.h> + +#include "gpio-ep93xx.h" #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -123,7 +125,7 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) /** * ep93xx_chip_revision() - returns the EP93xx chip revision * - * See <mach/platform.h> for more information. + * See "platform.h" for more information. */ unsigned int ep93xx_chip_revision(void) { diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c index 88a4c9b089a5..821427107b11 100644 --- a/arch/arm/mach-ep93xx/dma.c +++ b/arch/arm/mach-ep93xx/dma.c @@ -26,7 +26,7 @@ #include <linux/platform_device.h> #include <linux/platform_data/dma-ep93xx.h> -#include <mach/hardware.h> +#include "hardware.h" #include "soc.h" diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 34e18e9556d9..c8c47122cf1d 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -33,10 +33,10 @@ #include <sound/cs4271.h> -#include <mach/hardware.h> +#include "hardware.h" #include <linux/platform_data/video-ep93xx.h> #include <linux/platform_data/spi-ep93xx.h> -#include <mach/gpio-ep93xx.h> +#include "gpio-ep93xx.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index 0cca5b183309..ac48e3476587 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -15,7 +15,7 @@ #include <linux/platform_device.h> #include <linux/sizes.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h index 242af4a401ea..242af4a401ea 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h +++ b/arch/arm/mach-ep93xx/gpio-ep93xx.h diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/hardware.h index 8938906e780a..e7d850e04782 100644 --- a/arch/arm/mach-ep93xx/include/mach/hardware.h +++ b/arch/arm/mach-ep93xx/hardware.h @@ -6,7 +6,7 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include <mach/platform.h> +#include "platform.h" /* * The EP93xx has two external crystal oscillators. To generate the diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 373583c29825..c7f64e4ff6c7 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -16,7 +16,7 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/hardware.h> +#include "hardware.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/platform.h index 6c41c794bed5..b4045a186239 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/platform.h @@ -5,6 +5,7 @@ #ifndef __ASSEMBLY__ +#include <linux/platform_data/eth-ep93xx.h> #include <linux/reboot.h> struct device; @@ -15,23 +16,9 @@ struct ep93xxfb_mach_info; struct ep93xx_keypad_platform_data; struct ep93xx_spi_info; -struct ep93xx_eth_data -{ - unsigned char dev_addr[6]; - unsigned char phy_id; -}; - void ep93xx_map_io(void); void ep93xx_init_irq(void); -#define EP93XX_CHIP_REV_D0 3 -#define EP93XX_CHIP_REV_D1 4 -#define EP93XX_CHIP_REV_E0 5 -#define EP93XX_CHIP_REV_E1 6 -#define EP93XX_CHIP_REV_E2 7 - -unsigned int ep93xx_chip_revision(void); - void ep93xx_register_flash(unsigned int width, resource_size_t start, resource_size_t size); @@ -41,19 +28,11 @@ void ep93xx_register_spi(struct ep93xx_spi_info *info, struct spi_board_info *devices, int num); void ep93xx_register_fb(struct ep93xxfb_mach_info *data); void ep93xx_register_pwm(int pwm0, int pwm1); -int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); -void ep93xx_pwm_release_gpio(struct platform_device *pdev); void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); -int ep93xx_keypad_acquire_gpio(struct platform_device *pdev); -void ep93xx_keypad_release_gpio(struct platform_device *pdev); void ep93xx_register_i2s(void); -int ep93xx_i2s_acquire(void); -void ep93xx_i2s_release(void); void ep93xx_register_ac97(void); void ep93xx_register_ide(void); void ep93xx_register_adc(void); -int ep93xx_ide_acquire_gpio(struct platform_device *pdev); -void ep93xx_ide_release_gpio(struct platform_device *pdev); struct device *ep93xx_init_devices(void); extern void ep93xx_timer_init(void); diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index f0f38c0dba52..5a3c32fa7ace 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -27,8 +27,8 @@ #include <linux/gpio.h> #include <linux/gpio/machine.h> -#include <mach/hardware.h> -#include <mach/gpio-ep93xx.h> +#include "hardware.h" +#include "gpio-ep93xx.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index cf0cb58b3454..f8f89551dbed 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -25,9 +25,9 @@ #include <linux/mtd/platnand.h> -#include <mach/hardware.h> +#include "hardware.h" #include <linux/platform_data/video-ep93xx.h> -#include <mach/gpio-ep93xx.h> +#include "gpio-ep93xx.h" #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index a3a20c83c6b8..e9f369067293 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -24,8 +24,8 @@ #include <linux/platform_data/spi-ep93xx.h> #include <linux/gpio/machine.h> -#include <mach/gpio-ep93xx.h> -#include <mach/hardware.h> +#include "gpio-ep93xx.h" +#include "hardware.h" #include <mach/irqs.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index f95a644769e4..d44db6d67f35 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -31,10 +31,10 @@ #include <sound/cs4271.h> -#include <mach/hardware.h> +#include "hardware.h" #include <linux/platform_data/video-ep93xx.h> #include <linux/platform_data/spi-ep93xx.h> -#include <mach/gpio-ep93xx.h> +#include "gpio-ep93xx.h" #include <asm/mach-types.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index b40963cf91c7..1c518b8ee520 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -106,21 +106,15 @@ config SOC_EXYNOS5420 bool "SAMSUNG EXYNOS5420" default y depends on ARCH_EXYNOS5 + select MCPM if SMP + select ARM_CCI400_PORT_CTRL + select ARM_CPU_SUSPEND config SOC_EXYNOS5800 bool "SAMSUNG EXYNOS5800" default y depends on SOC_EXYNOS5420 -config EXYNOS5420_MCPM - bool "Exynos5420 Multi-Cluster PM support" - depends on MCPM && SOC_EXYNOS5420 - select ARM_CCI400_PORT_CTRL - select ARM_CPU_SUSPEND - help - This is needed to provide CPU and cluster power management - on Exynos5420 implementing big.LITTLE. - config EXYNOS_CPU_SUSPEND bool select ARM_CPU_SUSPEND diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index cd00c82a1add..264dbaa89c3d 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -18,5 +18,5 @@ plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec) -obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o +obj-$(CONFIG_MCPM) += mcpm-exynos.o CFLAGS_mcpm-exynos.o += -march=armv7-a diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 1b8699e94098..c93356a8d662 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -91,6 +91,7 @@ extern u32 cp15_save_power; extern void __iomem *sysram_ns_base_addr; extern void __iomem *sysram_base_addr; +extern phys_addr_t sysram_base_phys; extern void __iomem *pmu_base_addr; void exynos_sysram_init(void); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 865dcc4c3181..9aa483366ebc 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -33,6 +33,7 @@ static struct platform_device exynos_cpuidle = { }; void __iomem *sysram_base_addr __ro_after_init; +phys_addr_t sysram_base_phys __ro_after_init; void __iomem *sysram_ns_base_addr __ro_after_init; void __init exynos_sysram_init(void) @@ -43,6 +44,8 @@ void __init exynos_sysram_init(void) if (!of_device_is_available(node)) continue; sysram_base_addr = of_iomap(node, 0); + sysram_base_phys = of_translate_address(node, + of_get_address(node, 0, NULL, NULL)); break; } diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index d602e3bf3f96..2eaf2dbb8e81 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -196,6 +196,7 @@ bool __init exynos_secure_firmware_available(void) return false; addr = of_get_address(nd, 0, NULL, NULL); + of_node_put(nd); if (!addr) { pr_err("%s: No address specified.\n", __func__); return false; diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index 72bc035bedbe..9a681b421ae1 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -75,14 +75,25 @@ static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster) */ if (cluster && cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) { + unsigned int timeout = 16; + /* * Before we reset the Little cores, we should wait * the SPARE2 register is set to 1 because the init * codes of the iROM will set the register after * initialization. */ - while (!pmu_raw_readl(S5P_PMU_SPARE2)) + while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) { + timeout--; udelay(10); + } + + if (timeout == 0) { + pr_err("cpu %u cluster %u powerup failed\n", + cpu, cluster); + exynos_cpu_power_down(cpunr); + return -ETIMEDOUT; + } pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu), EXYNOS_SWRESET); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index abcac6164233..0cbbae8bf1f8 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -214,13 +214,20 @@ static inline void __iomem *cpu_boot_reg(int cpu) */ void exynos_core_restart(u32 core_id) { + unsigned int timeout = 16; u32 val; if (!of_machine_is_compatible("samsung,exynos3250")) return; - while (!pmu_raw_readl(S5P_PMU_SPARE2)) + while (timeout && !pmu_raw_readl(S5P_PMU_SPARE2)) { + timeout--; udelay(10); + } + if (timeout == 0) { + pr_err("cpu core %u restart failed\n", core_id); + return; + } udelay(10); val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id)); diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h index f355185d4239..98832e50852d 100644 --- a/arch/arm/mach-exynos/smc.h +++ b/arch/arm/mach-exynos/smc.h @@ -25,6 +25,13 @@ #define SMC_CMD_L2X0INVALL (-24) #define SMC_CMD_L2X0DEBUG (-25) +/* For Accessing CP15/SFR (General) */ +#define SMC_CMD_REG (-101) + +/* defines for SMC_CMD_REG */ +#define SMC_REG_CLASS_SFR_W (0x1 << 30) +#define SMC_REG_ID_SFR_W(addr) (SMC_REG_CLASS_SFR_W | ((addr) >> 2)) + #ifndef __ASSEMBLY__ extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3); diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 0850505ac78b..be122af0de8f 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -31,6 +31,7 @@ #include <asm/suspend.h> #include "common.h" +#include "smc.h" #define REG_TABLE_END (-1U) @@ -62,6 +63,8 @@ struct exynos_pm_state { int cpu_state; unsigned int pmu_spare3; void __iomem *sysram_base; + phys_addr_t sysram_phys; + bool secure_firmware; }; static const struct exynos_pm_data *pm_data __ro_after_init; @@ -265,9 +268,7 @@ static int exynos5420_cpu_suspend(unsigned long arg) unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE); - - if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) { + if (IS_ENABLED(CONFIG_MCPM)) { mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume); mcpm_cpu_suspend(); } @@ -341,11 +342,16 @@ static void exynos5420_pm_prepare(void) */ pm_state.cpu_state = readl_relaxed(pm_state.sysram_base + EXYNOS5420_CPU_STATE); + writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE); + if (pm_state.secure_firmware) + exynos_smc(SMC_CMD_REG, SMC_REG_ID_SFR_W(pm_state.sysram_phys + + EXYNOS5420_CPU_STATE), + 0, 0); exynos_pm_enter_sleep_mode(); /* ensure at least INFORM0 has the resume address */ - if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) + if (IS_ENABLED(CONFIG_MCPM)) pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0); tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0)); @@ -444,8 +450,27 @@ early_wakeup: static void exynos5420_prepare_pm_resume(void) { - if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) + unsigned int mpidr, cluster; + + mpidr = read_cpuid_mpidr(); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + if (IS_ENABLED(CONFIG_MCPM)) WARN_ON(mcpm_cpu_powered_up()); + + if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) { + /* + * When system is resumed on the LITTLE/KFC core (cluster 1), + * the DSCR is not properly updated until the power is turned + * on also for the cluster 0. Enable it for a while to + * propagate the SPNIDEN and SPIDEN signals from Secure JTAG + * block and avoid undefined instruction issue on CP14 reset. + */ + pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_COMMON_CONFIGURATION(0)); + pmu_raw_writel(0, + EXYNOS_COMMON_CONFIGURATION(0)); + } } static void exynos5420_pm_resume(void) @@ -460,6 +485,11 @@ static void exynos5420_pm_resume(void) /* Restore the sysram cpu state register */ writel_relaxed(pm_state.cpu_state, pm_state.sysram_base + EXYNOS5420_CPU_STATE); + if (pm_state.secure_firmware) + exynos_smc(SMC_CMD_REG, + SMC_REG_ID_SFR_W(pm_state.sysram_phys + + EXYNOS5420_CPU_STATE), + EXYNOS_AFTR_MAGIC, 0); pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION); @@ -639,8 +669,10 @@ void __init exynos_pm_init(void) if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) { pr_warn("Outdated DT detected, suspend/resume will NOT work\n"); + of_node_put(np); return; } + of_node_put(np); pm_data = (const struct exynos_pm_data *) match->data; @@ -659,8 +691,11 @@ void __init exynos_pm_init(void) * Applicable as of now only to Exynos542x. If booted under secure * firmware, the non-secure region of sysram should be used. */ - if (exynos_secure_firmware_available()) + if (exynos_secure_firmware_available()) { + pm_state.sysram_phys = sysram_base_phys; pm_state.sysram_base = sysram_ns_base_addr; - else + pm_state.secure_firmware = true; + } else { pm_state.sysram_base = sysram_base_addr; + } } diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index e67e0b2d4ce0..e527532f6931 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -354,9 +354,11 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) * * Note that IRQ #32 is GIC SPI #0. */ - imx_gpc_hwirq_unmask(0); + if (mode != WAIT_CLOCKED) + imx_gpc_hwirq_unmask(0); writel_relaxed(val, ccm_base + CLPCR); - imx_gpc_hwirq_mask(0); + if (mode != WAIT_CLOCKED) + imx_gpc_hwirq_mask(0); return 0; } diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index fea008123eb1..83afb80d38a8 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -4,6 +4,20 @@ menu "Intel IXP4xx Implementation Options" comment "IXP4xx Platforms" +config MACH_IXP4XX_OF + bool + prompt "Devce Tree IXP4xx boards" + default y + select ARM_APPENDED_DTB # Old Redboot bootloaders deployed + select I2C + select I2C_IOP3XX + select PCI + select SERIAL_OF_PLATFORM + select TIMER_OF + select USE_OF + help + Say 'Y' here to support Device Tree-based IXP4xx platforms. + config MACH_NSLU2 bool prompt "Linksys NSLU2" @@ -222,19 +236,6 @@ config IXP4XX_INDIRECT_PCI need to use the indirect method instead. If you don't know what you need, leave this option unselected. -config IXP4XX_QMGR - tristate "IXP4xx Queue Manager support" - help - This driver supports IXP4xx built-in hardware queue manager - and is automatically selected by Ethernet and HSS drivers. - -config IXP4XX_NPE - tristate "IXP4xx Network Processor Engine support" - select FW_LOADER - help - This driver supports IXP4xx built-in network coprocessors - and is automatically selected by Ethernet and HSS drivers. - endmenu endif diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index f09994500a34..1fa4e6605782 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -6,6 +6,9 @@ obj-pci-y := obj-pci-n := +# Device tree platform +obj-pci-$(CONFIG_MACH_IXP4XX_OF) += ixp4xx-of.o + obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o @@ -40,5 +43,3 @@ obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o -obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o -obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c index 548c7d43ade6..9c834f0f4231 100644 --- a/arch/arm/mach-ixp4xx/avila-pci.c +++ b/arch/arm/mach-ixp4xx/avila-pci.c @@ -27,6 +27,8 @@ #include <mach/hardware.h> #include <asm/mach-types.h> +#include "irqs.h" + #define AVILA_MAX_DEV 4 #define LOFT_MAX_DEV 6 #define IRQ_LINES 4 diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 44cbbce6bda6..1981b33109cb 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -28,6 +28,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + #define AVILA_SDA_PIN 7 #define AVILA_SCL_PIN 6 diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 846e033c56fa..cc5f15679d29 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -22,41 +22,30 @@ #include <linux/serial_core.h> #include <linux/interrupt.h> #include <linux/bitops.h> -#include <linux/time.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> #include <linux/io.h> #include <linux/export.h> -#include <linux/gpio/driver.h> #include <linux/cpu.h> #include <linux/pci.h> #include <linux/sched_clock.h> +#include <linux/bitops.h> +#include <linux/irqchip/irq-ixp4xx.h> +#include <linux/platform_data/timer-ixp4xx.h> #include <mach/udc.h> #include <mach/hardware.h> #include <mach/io.h> #include <linux/uaccess.h> #include <asm/pgtable.h> #include <asm/page.h> +#include <asm/exception.h> #include <asm/irq.h> #include <asm/system_misc.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#define IXP4XX_TIMER_FREQ 66666000 - -/* - * The timer register doesn't allow to specify the two least significant bits of - * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is - * the best value with the two least significant bits unset. - */ -#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \ - (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \ - (IXP4XX_OST_RELOAD_MASK + 1) +#include "irqs.h" -static void __init ixp4xx_clocksource_init(void); -static void __init ixp4xx_clockevent_init(void); -static struct clock_event_device clockevent_ixp4xx; +#define IXP4XX_TIMER_FREQ 66666000 /************************************************************************* * IXP4xx chipset I/O mapping @@ -77,11 +66,6 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE - }, { /* Queue Manager */ - .virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS), - .length = IXP4XX_QMGR_REGION_SIZE, - .type = MT_DEVICE }, }; @@ -90,258 +74,23 @@ void __init ixp4xx_map_io(void) iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc)); } -/* - * GPIO-functions - */ -/* - * The following converted to the real HW bits the gpio_line_config - */ -/* GPIO pin types */ -#define IXP4XX_GPIO_OUT 0x1 -#define IXP4XX_GPIO_IN 0x2 - -/* GPIO signal types */ -#define IXP4XX_GPIO_LOW 0 -#define IXP4XX_GPIO_HIGH 1 - -/* GPIO Clocks */ -#define IXP4XX_GPIO_CLK_0 14 -#define IXP4XX_GPIO_CLK_1 15 - -static void gpio_line_config(u8 line, u32 direction) -{ - if (direction == IXP4XX_GPIO_IN) - *IXP4XX_GPIO_GPOER |= (1 << line); - else - *IXP4XX_GPIO_GPOER &= ~(1 << line); -} - -static void gpio_line_get(u8 line, int *value) -{ - *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1; -} - -static void gpio_line_set(u8 line, int value) -{ - if (value == IXP4XX_GPIO_HIGH) - *IXP4XX_GPIO_GPOUTR |= (1 << line); - else if (value == IXP4XX_GPIO_LOW) - *IXP4XX_GPIO_GPOUTR &= ~(1 << line); -} - -/************************************************************************* - * IXP4xx chipset IRQ handling - * - * TODO: GPIO IRQs should be marked invalid until the user of the IRQ - * (be it PCI or something else) configures that GPIO line - * as an IRQ. - **************************************************************************/ -enum ixp4xx_irq_type { - IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE -}; - -/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */ -static unsigned long long ixp4xx_irq_edge = 0; - -/* - * IRQ -> GPIO mapping table - */ -static signed char irq2gpio[32] = { - -1, -1, -1, -1, -1, -1, 0, 1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, 2, 3, 4, 5, 6, - 7, 8, 9, 10, 11, 12, -1, -1, -}; - -static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -{ - int irq; - - for (irq = 0; irq < 32; irq++) { - if (irq2gpio[irq] == gpio) - return irq; - } - return -EINVAL; -} - -static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type) -{ - int line = irq2gpio[d->irq]; - u32 int_style; - enum ixp4xx_irq_type irq_type; - volatile u32 *int_reg; - - /* - * Only for GPIO IRQs - */ - if (line < 0) - return -EINVAL; - - switch (type){ - case IRQ_TYPE_EDGE_BOTH: - int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; - irq_type = IXP4XX_IRQ_EDGE; - break; - case IRQ_TYPE_EDGE_RISING: - int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; - irq_type = IXP4XX_IRQ_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; - irq_type = IXP4XX_IRQ_EDGE; - break; - case IRQ_TYPE_LEVEL_HIGH: - int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; - irq_type = IXP4XX_IRQ_LEVEL; - break; - case IRQ_TYPE_LEVEL_LOW: - int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; - irq_type = IXP4XX_IRQ_LEVEL; - break; - default: - return -EINVAL; - } - - if (irq_type == IXP4XX_IRQ_EDGE) - ixp4xx_irq_edge |= (1 << d->irq); - else - ixp4xx_irq_edge &= ~(1 << d->irq); - - if (line >= 8) { /* pins 8-15 */ - line -= 8; - int_reg = IXP4XX_GPIO_GPIT2R; - } else { /* pins 0-7 */ - int_reg = IXP4XX_GPIO_GPIT1R; - } - - /* Clear the style for the appropriate pin */ - *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << - (line * IXP4XX_GPIO_STYLE_SIZE)); - - *IXP4XX_GPIO_GPISR = (1 << line); - - /* Set the new style */ - *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); - - /* Configure the line as an input */ - gpio_line_config(irq2gpio[d->irq], IXP4XX_GPIO_IN); - - return 0; -} - -static void ixp4xx_irq_mask(struct irq_data *d) -{ - if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32) - *IXP4XX_ICMR2 &= ~(1 << (d->irq - 32)); - else - *IXP4XX_ICMR &= ~(1 << d->irq); -} - -static void ixp4xx_irq_ack(struct irq_data *d) -{ - int line = (d->irq < 32) ? irq2gpio[d->irq] : -1; - - if (line >= 0) - *IXP4XX_GPIO_GPISR = (1 << line); -} - -/* - * Level triggered interrupts on GPIO lines can only be cleared when the - * interrupt condition disappears. - */ -static void ixp4xx_irq_unmask(struct irq_data *d) -{ - if (!(ixp4xx_irq_edge & (1 << d->irq))) - ixp4xx_irq_ack(d); - - if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32) - *IXP4XX_ICMR2 |= (1 << (d->irq - 32)); - else - *IXP4XX_ICMR |= (1 << d->irq); -} - -static struct irq_chip ixp4xx_irq_chip = { - .name = "IXP4xx", - .irq_ack = ixp4xx_irq_ack, - .irq_mask = ixp4xx_irq_mask, - .irq_unmask = ixp4xx_irq_unmask, - .irq_set_type = ixp4xx_set_irq_type, -}; - void __init ixp4xx_init_irq(void) { - int i = 0; - /* * ixp4xx does not implement the XScale PWRMODE register * so it must not call cpu_do_idle(). */ cpu_idle_poll_ctrl(true); - /* Route all sources to IRQ instead of FIQ */ - *IXP4XX_ICLR = 0x0; - - /* Disable all interrupt */ - *IXP4XX_ICMR = 0x0; - - if (cpu_is_ixp46x() || cpu_is_ixp43x()) { - /* Route upper 32 sources to IRQ instead of FIQ */ - *IXP4XX_ICLR2 = 0x00; - - /* Disable upper 32 interrupts */ - *IXP4XX_ICMR2 = 0x00; - } - - /* Default to all level triggered */ - for(i = 0; i < NR_IRQS; i++) { - irq_set_chip_and_handler(i, &ixp4xx_irq_chip, - handle_level_irq); - irq_clear_status_flags(i, IRQ_NOREQUEST); - } + ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS, + (cpu_is_ixp46x() || cpu_is_ixp43x())); } - -/************************************************************************* - * IXP4xx timer tick - * We use OS timer1 on the CPU for the timer tick and the timestamp - * counter as a source of real clock ticks to account for missed jiffies. - *************************************************************************/ - -static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - /* Clear Pending Interrupt by writing '1' to it */ - *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction ixp4xx_timer_irq = { - .name = "timer1", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = ixp4xx_timer_interrupt, - .dev_id = &clockevent_ixp4xx, -}; - void __init ixp4xx_timer_init(void) { - /* Reset/disable counter */ - *IXP4XX_OSRT1 = 0; - - /* Clear Pending Interrupt by writing '1' to it */ - *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; - - /* Reset time-stamp counter */ - *IXP4XX_OSTS = 0; - - /* Connect the interrupt handler and enable the interrupt */ - setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq); - - ixp4xx_clocksource_init(); - ixp4xx_clockevent_init(); + return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS, + IRQ_IXP4XX_TIMER1, + IXP4XX_TIMER_FREQ); } static struct pxa2xx_udc_mach_info ixp4xx_udc_info; @@ -364,6 +113,24 @@ static struct resource ixp4xx_udc_resources[] = { }, }; +static struct resource ixp4xx_gpio_resource[] = { + { + .start = IXP4XX_GPIO_BASE_PHYS, + .end = IXP4XX_GPIO_BASE_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ixp4xx_gpio_device = { + .name = "ixp4xx-gpio", + .id = -1, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ixp4xx_gpio_resource, + .num_resources = ARRAY_SIZE(ixp4xx_gpio_resource), +}; + /* * USB device controller. The IXP4xx uses the same controller as PXA25X, * so we just use the same device. @@ -378,7 +145,61 @@ static struct platform_device ixp4xx_udc_device = { }, }; +static struct resource ixp4xx_npe_resources[] = { + { + .start = IXP4XX_NPEA_BASE_PHYS, + .end = IXP4XX_NPEA_BASE_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_NPEB_BASE_PHYS, + .end = IXP4XX_NPEB_BASE_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_NPEC_BASE_PHYS, + .end = IXP4XX_NPEC_BASE_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, + +}; + +static struct platform_device ixp4xx_npe_device = { + .name = "ixp4xx-npe", + .id = -1, + .num_resources = ARRAY_SIZE(ixp4xx_npe_resources), + .resource = ixp4xx_npe_resources, +}; + +static struct resource ixp4xx_qmgr_resources[] = { + { + .start = IXP4XX_QMGR_BASE_PHYS, + .end = IXP4XX_QMGR_BASE_PHYS + 0x3fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_IXP4XX_QM1, + .end = IRQ_IXP4XX_QM1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_IXP4XX_QM2, + .end = IRQ_IXP4XX_QM2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ixp4xx_qmgr_device = { + .name = "ixp4xx-qmgr", + .id = -1, + .num_resources = ARRAY_SIZE(ixp4xx_qmgr_resources), + .resource = ixp4xx_qmgr_resources, +}; + static struct platform_device *ixp4xx_devices[] __initdata = { + &ixp4xx_npe_device, + &ixp4xx_qmgr_device, + &ixp4xx_gpio_device, &ixp4xx_udc_device, }; @@ -413,56 +234,12 @@ static struct platform_device *ixp46x_devices[] __initdata = { unsigned long ixp4xx_exp_bus_size; EXPORT_SYMBOL(ixp4xx_exp_bus_size); -static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -{ - gpio_line_config(gpio, IXP4XX_GPIO_IN); - - return 0; -} - -static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, - int level) -{ - gpio_line_set(gpio, level); - gpio_line_config(gpio, IXP4XX_GPIO_OUT); - - return 0; -} - -static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio) -{ - int value; - - gpio_line_get(gpio, &value); - - return value; -} - -static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, - int value) -{ - gpio_line_set(gpio, value); -} - -static struct gpio_chip ixp4xx_gpio_chip = { - .label = "IXP4XX_GPIO_CHIP", - .direction_input = ixp4xx_gpio_direction_input, - .direction_output = ixp4xx_gpio_direction_output, - .get = ixp4xx_gpio_get_value, - .set = ixp4xx_gpio_set_value, - .to_irq = ixp4xx_gpio_to_irq, - .base = 0, - .ngpio = 16, -}; - void __init ixp4xx_sys_init(void) { ixp4xx_exp_bus_size = SZ_16M; platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); - gpiochip_add_data(&ixp4xx_gpio_chip, NULL); - if (cpu_is_ixp46x()) { int region; @@ -481,103 +258,8 @@ void __init ixp4xx_sys_init(void) ixp4xx_exp_bus_size >> 20); } -/* - * sched_clock() - */ -static u64 notrace ixp4xx_read_sched_clock(void) -{ - return *IXP4XX_OSTS; -} - -/* - * clocksource - */ - -static u64 ixp4xx_clocksource_read(struct clocksource *c) -{ - return *IXP4XX_OSTS; -} - unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); -static void __init ixp4xx_clocksource_init(void) -{ - sched_clock_register(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq); - - clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32, - ixp4xx_clocksource_read); -} - -/* - * clockevents - */ -static int ixp4xx_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; - - *IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts; - - return 0; -} - -static int ixp4xx_shutdown(struct clock_event_device *evt) -{ - unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; - unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; - - opts &= ~IXP4XX_OST_ENABLE; - *IXP4XX_OSRT1 = osrt | opts; - return 0; -} - -static int ixp4xx_set_oneshot(struct clock_event_device *evt) -{ - unsigned long opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT; - unsigned long osrt = 0; - - /* period set by 'set next_event' */ - *IXP4XX_OSRT1 = osrt | opts; - return 0; -} - -static int ixp4xx_set_periodic(struct clock_event_device *evt) -{ - unsigned long opts = IXP4XX_OST_ENABLE; - unsigned long osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK; - - *IXP4XX_OSRT1 = osrt | opts; - return 0; -} - -static int ixp4xx_resume(struct clock_event_device *evt) -{ - unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; - unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; - - opts |= IXP4XX_OST_ENABLE; - *IXP4XX_OSRT1 = osrt | opts; - return 0; -} - -static struct clock_event_device clockevent_ixp4xx = { - .name = "ixp4xx timer1", - .features = CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_state_shutdown = ixp4xx_shutdown, - .set_state_periodic = ixp4xx_set_periodic, - .set_state_oneshot = ixp4xx_set_oneshot, - .tick_resume = ixp4xx_resume, - .set_next_event = ixp4xx_set_next_event, -}; - -static void __init ixp4xx_clockevent_init(void) -{ - clockevent_ixp4xx.cpumask = cpumask_of(0); - clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ, - 0xf, 0xfffffffe); -} void ixp4xx_restart(enum reboot_mode mode, const char *cmd) { diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index 5d14ce2aee6d..a16c35d2bb96 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -23,6 +23,8 @@ #include <asm/irq.h> #include <asm/mach/pci.h> +#include "irqs.h" + #define SLOT0_DEVID 14 #define SLOT1_DEVID 15 diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 7e40fe70933b..7ca43ca2816d 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -25,6 +25,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + #define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3) #define COYOTE_IDE_BASE_VIRT 0xFFFE1000 #define COYOTE_IDE_REGION_SIZE 0x1000 diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c index 8dca76937723..6899023bd1b7 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-pci.c +++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -22,6 +22,8 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> +#include "irqs.h" + #define MAX_DEV 4 #define IRQ_LINES 3 diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 397190f3a8da..4d4c62fced71 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -35,6 +35,8 @@ #include <asm/mach/flash.h> #include <asm/mach/time.h> +#include "irqs.h" + #define DSMG600_SDA_PIN 5 #define DSMG600_SCL_PIN 4 @@ -268,9 +270,6 @@ static void __init dsmg600_init(void) { ixp4xx_sys_init(); - /* Make sure that GPIO14 and GPIO15 are not used as clocks */ - *IXP4XX_GPIO_GPCLKR = 0; - dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); dsmg600_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c index fd4a8625b4ae..6c08bb9d9807 100644 --- a/arch/arm/mach-ixp4xx/fsg-pci.c +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -22,6 +22,8 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> +#include "irqs.h" + #define MAX_DEV 3 #define IRQ_LINES 3 diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index f0a152e365b1..648932d8d7a8 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -29,6 +29,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + #define FSG_SDA_PIN 12 #define FSG_SCL_PIN 13 diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c index d9d6cc089707..903c75330b76 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-pci.c +++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c @@ -27,6 +27,8 @@ #include <asm/mach/pci.h> +#include "irqs.h" + void __init gateway7001_pci_preinit(void) { irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index 1be6faf6da9a..678e7dfff0e5 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -28,6 +28,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + static struct flash_platform_data gateway7001_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 551d114c9e14..1223d160448f 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -30,6 +30,8 @@ #include <mach/hardware.h> #include <asm/mach/pci.h> +#include "irqs.h" + #define SLOT0_DEVID 0 #define SLOT1_DEVID 1 #define INTA 10 /* slot 1 has INTA and INTB crossed */ diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 16a12994fb53..5dbdde8e2338 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -36,6 +36,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + /* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch and operate as an SPI type interface. The details of the interface are available on Kendin/Micrel's web site. */ diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S deleted file mode 100644 index 79adf83e2c3d..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for IXP4xx-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <mach/hardware.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET) - ldr \irqstat, [\irqstat] @ get interrupts - cmp \irqstat, #0 - beq 1001f @ upper IRQ? - clz \irqnr, \irqstat - mov \base, #31 - sub \irqnr, \base, \irqnr - b 1002f @ lower IRQ being - @ handled - -1001: - /* - * IXP465/IXP435 has an upper IRQ status register - */ -#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) - ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET) - ldr \irqstat, [\irqstat] @ get upper interrupts - mov \irqnr, #63 - clz \irqstat, \irqstat - cmp \irqstat, #32 - subne \irqnr, \irqnr, \irqstat -#endif -1002: - .endm - - diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h deleted file mode 100644 index 7e6d4cce7c27..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/irqs.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/irqs.h - * - * IRQ definitions for IXP4XX based systems - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _ARCH_IXP4XX_IRQS_H_ -#define _ARCH_IXP4XX_IRQS_H_ - -#define IRQ_IXP4XX_NPEA 0 -#define IRQ_IXP4XX_NPEB 1 -#define IRQ_IXP4XX_NPEC 2 -#define IRQ_IXP4XX_QM1 3 -#define IRQ_IXP4XX_QM2 4 -#define IRQ_IXP4XX_TIMER1 5 -#define IRQ_IXP4XX_GPIO0 6 -#define IRQ_IXP4XX_GPIO1 7 -#define IRQ_IXP4XX_PCI_INT 8 -#define IRQ_IXP4XX_PCI_DMA1 9 -#define IRQ_IXP4XX_PCI_DMA2 10 -#define IRQ_IXP4XX_TIMER2 11 -#define IRQ_IXP4XX_USB 12 -#define IRQ_IXP4XX_UART2 13 -#define IRQ_IXP4XX_TIMESTAMP 14 -#define IRQ_IXP4XX_UART1 15 -#define IRQ_IXP4XX_WDOG 16 -#define IRQ_IXP4XX_AHB_PMU 17 -#define IRQ_IXP4XX_XSCALE_PMU 18 -#define IRQ_IXP4XX_GPIO2 19 -#define IRQ_IXP4XX_GPIO3 20 -#define IRQ_IXP4XX_GPIO4 21 -#define IRQ_IXP4XX_GPIO5 22 -#define IRQ_IXP4XX_GPIO6 23 -#define IRQ_IXP4XX_GPIO7 24 -#define IRQ_IXP4XX_GPIO8 25 -#define IRQ_IXP4XX_GPIO9 26 -#define IRQ_IXP4XX_GPIO10 27 -#define IRQ_IXP4XX_GPIO11 28 -#define IRQ_IXP4XX_GPIO12 29 -#define IRQ_IXP4XX_SW_INT1 30 -#define IRQ_IXP4XX_SW_INT2 31 -#define IRQ_IXP4XX_USB_HOST 32 -#define IRQ_IXP4XX_I2C 33 -#define IRQ_IXP4XX_SSP 34 -#define IRQ_IXP4XX_TSYNC 35 -#define IRQ_IXP4XX_EAU_DONE 36 -#define IRQ_IXP4XX_SHA_DONE 37 -#define IRQ_IXP4XX_SWCP_PE 58 -#define IRQ_IXP4XX_QM_PE 60 -#define IRQ_IXP4XX_MCU_ECC 61 -#define IRQ_IXP4XX_EXP_PE 62 - -#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n) -#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n) - -/* - * Only first 32 sources are valid if running on IXP42x systems - */ -#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) -#define NR_IRQS 64 -#else -#define NR_IRQS 32 -#endif - -#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU) - -#endif diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index b7ddd27419c2..588b76651085 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -43,8 +43,6 @@ * Queue Manager */ #define IXP4XX_QMGR_BASE_PHYS 0x60000000 -#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000) -#define IXP4XX_QMGR_REGION_SIZE 0x00004000 /* * Peripheral space, including debug UART. Must be section-aligned so that @@ -132,9 +130,6 @@ #define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000) #define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000) #define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000) -#define IXP4XX_NPEA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000) -#define IXP4XX_NPEB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000) -#define IXP4XX_NPEC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000) #define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000) #define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000) #define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000) @@ -148,95 +143,6 @@ #define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000) /* - * Constants to make it easy to access Interrupt Controller registers - */ -#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */ -#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */ -#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */ -#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */ -#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */ -#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */ -#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */ -#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */ - -/* - * IXP465-only - */ -#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */ -#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */ -#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */ -#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */ -#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */ -#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */ - - -/* - * Interrupt Controller Register Definitions. - */ - -#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x))) - -#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET) -#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET) -#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET) -#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET) -#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET) -#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET) -#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) -#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET) -#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET) -#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET) -#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET) -#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET) -#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET) -#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET) - -/* - * Constants to make it easy to access GPIO registers - */ -#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00 -#define IXP4XX_GPIO_GPOER_OFFSET 0x04 -#define IXP4XX_GPIO_GPINR_OFFSET 0x08 -#define IXP4XX_GPIO_GPISR_OFFSET 0x0C -#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10 -#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14 -#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18 -#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C - -/* - * GPIO Register Definitions. - * [Only perform 32bit reads/writes] - */ -#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x))) - -#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET) -#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET) -#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET) -#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET) -#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET) -#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET) -#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET) -#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET) - -/* - * GPIO register bit definitions - */ - -/* Interrupt styles - */ -#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0 -#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1 -#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2 -#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3 -#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4 - -/* - * Mask used to clear interrupt styles - */ -#define IXP4XX_GPIO_STYLE_CLEAR 0x7 -#define IXP4XX_GPIO_STYLE_SIZE 3 - -/* * Constants to make it easy to access Timer Control/Status registers */ #define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */ diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h deleted file mode 100644 index 4de8da536dbb..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - */ - -#ifndef IXP4XX_QMGR_H -#define IXP4XX_QMGR_H - -#include <linux/io.h> -#include <linux/kernel.h> - -#define DEBUG_QMGR 0 - -#define HALF_QUEUES 32 -#define QUEUES 64 -#define MAX_QUEUE_LENGTH 4 /* in dwords */ - -#define QUEUE_STAT1_EMPTY 1 /* queue status bits */ -#define QUEUE_STAT1_NEARLY_EMPTY 2 -#define QUEUE_STAT1_NEARLY_FULL 4 -#define QUEUE_STAT1_FULL 8 -#define QUEUE_STAT2_UNDERFLOW 1 -#define QUEUE_STAT2_OVERFLOW 2 - -#define QUEUE_WATERMARK_0_ENTRIES 0 -#define QUEUE_WATERMARK_1_ENTRY 1 -#define QUEUE_WATERMARK_2_ENTRIES 2 -#define QUEUE_WATERMARK_4_ENTRIES 3 -#define QUEUE_WATERMARK_8_ENTRIES 4 -#define QUEUE_WATERMARK_16_ENTRIES 5 -#define QUEUE_WATERMARK_32_ENTRIES 6 -#define QUEUE_WATERMARK_64_ENTRIES 7 - -/* queue interrupt request conditions */ -#define QUEUE_IRQ_SRC_EMPTY 0 -#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1 -#define QUEUE_IRQ_SRC_NEARLY_FULL 2 -#define QUEUE_IRQ_SRC_FULL 3 -#define QUEUE_IRQ_SRC_NOT_EMPTY 4 -#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5 -#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6 -#define QUEUE_IRQ_SRC_NOT_FULL 7 - -struct qmgr_regs { - u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */ - u32 stat1[4]; /* 0x400 - 0x40F */ - u32 stat2[2]; /* 0x410 - 0x417 */ - u32 statne_h; /* 0x418 - queue nearly empty */ - u32 statf_h; /* 0x41C - queue full */ - u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */ - u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */ - u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */ - u32 reserved[1776]; - u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */ -}; - -void qmgr_set_irq(unsigned int queue, int src, - void (*handler)(void *pdev), void *pdev); -void qmgr_enable_irq(unsigned int queue); -void qmgr_disable_irq(unsigned int queue); - -/* request_ and release_queue() must be called from non-IRQ context */ - -#if DEBUG_QMGR -extern char qmgr_queue_descs[QUEUES][32]; - -int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, - unsigned int nearly_empty_watermark, - unsigned int nearly_full_watermark, - const char *desc_format, const char* name); -#else -int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, - unsigned int nearly_empty_watermark, - unsigned int nearly_full_watermark); -#define qmgr_request_queue(queue, len, nearly_empty_watermark, \ - nearly_full_watermark, desc_format, name) \ - __qmgr_request_queue(queue, len, nearly_empty_watermark, \ - nearly_full_watermark) -#endif - -void qmgr_release_queue(unsigned int queue); - - -static inline void qmgr_put_entry(unsigned int queue, u32 val) -{ - struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; -#if DEBUG_QMGR - BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ - - printk(KERN_DEBUG "Queue %s(%i) put %X\n", - qmgr_queue_descs[queue], queue, val); -#endif - __raw_writel(val, &qmgr_regs->acc[queue][0]); -} - -static inline u32 qmgr_get_entry(unsigned int queue) -{ - u32 val; - const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; - val = __raw_readl(&qmgr_regs->acc[queue][0]); -#if DEBUG_QMGR - BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ - - printk(KERN_DEBUG "Queue %s(%i) get %X\n", - qmgr_queue_descs[queue], queue, val); -#endif - return val; -} - -static inline int __qmgr_get_stat1(unsigned int queue) -{ - const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; - return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) - >> ((queue & 7) << 2)) & 0xF; -} - -static inline int __qmgr_get_stat2(unsigned int queue) -{ - const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; - BUG_ON(queue >= HALF_QUEUES); - return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) - >> ((queue & 0xF) << 1)) & 0x3; -} - -/** - * qmgr_stat_empty() - checks if a hardware queue is empty - * @queue: queue number - * - * Returns non-zero value if the queue is empty. - */ -static inline int qmgr_stat_empty(unsigned int queue) -{ - BUG_ON(queue >= HALF_QUEUES); - return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY; -} - -/** - * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark - * @queue: queue number - * - * Returns non-zero value if the queue is below low watermark. - */ -static inline int qmgr_stat_below_low_watermark(unsigned int queue) -{ - const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; - if (queue >= HALF_QUEUES) - return (__raw_readl(&qmgr_regs->statne_h) >> - (queue - HALF_QUEUES)) & 0x01; - return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY; -} - -/** - * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark - * @queue: queue number - * - * Returns non-zero value if the queue is above high watermark - */ -static inline int qmgr_stat_above_high_watermark(unsigned int queue) -{ - BUG_ON(queue >= HALF_QUEUES); - return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL; -} - -/** - * qmgr_stat_full() - checks if a hardware queue is full - * @queue: queue number - * - * Returns non-zero value if the queue is full. - */ -static inline int qmgr_stat_full(unsigned int queue) -{ - const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; - if (queue >= HALF_QUEUES) - return (__raw_readl(&qmgr_regs->statf_h) >> - (queue - HALF_QUEUES)) & 0x01; - return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL; -} - -/** - * qmgr_stat_underflow() - checks if a hardware queue experienced underflow - * @queue: queue number - * - * Returns non-zero value if the queue experienced underflow. - */ -static inline int qmgr_stat_underflow(unsigned int queue) -{ - return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW; -} - -/** - * qmgr_stat_overflow() - checks if a hardware queue experienced overflow - * @queue: queue number - * - * Returns non-zero value if the queue experienced overflow. - */ -static inline int qmgr_stat_overflow(unsigned int queue) -{ - return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW; -} - -#endif diff --git a/arch/arm/mach-ixp4xx/irqs.h b/arch/arm/mach-ixp4xx/irqs.h new file mode 100644 index 000000000000..6b7f220cf9e0 --- /dev/null +++ b/arch/arm/mach-ixp4xx/irqs.h @@ -0,0 +1,68 @@ +/* + * arch/arm/mach-ixp4xx/include/mach/irqs.h + * + * IRQ definitions for IXP4XX based systems + * + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _ARCH_IXP4XX_IRQS_H_ +#define _ARCH_IXP4XX_IRQS_H_ + +#define IRQ_IXP4XX_BASE 16 + +#define IRQ_IXP4XX_NPEA (IRQ_IXP4XX_BASE + 0) +#define IRQ_IXP4XX_NPEB (IRQ_IXP4XX_BASE + 1) +#define IRQ_IXP4XX_NPEC (IRQ_IXP4XX_BASE + 2) +#define IRQ_IXP4XX_QM1 (IRQ_IXP4XX_BASE + 3) +#define IRQ_IXP4XX_QM2 (IRQ_IXP4XX_BASE + 4) +#define IRQ_IXP4XX_TIMER1 (IRQ_IXP4XX_BASE + 5) +#define IRQ_IXP4XX_GPIO0 (IRQ_IXP4XX_BASE + 6) +#define IRQ_IXP4XX_GPIO1 (IRQ_IXP4XX_BASE + 7) +#define IRQ_IXP4XX_PCI_INT (IRQ_IXP4XX_BASE + 8) +#define IRQ_IXP4XX_PCI_DMA1 (IRQ_IXP4XX_BASE + 9) +#define IRQ_IXP4XX_PCI_DMA2 (IRQ_IXP4XX_BASE + 10) +#define IRQ_IXP4XX_TIMER2 (IRQ_IXP4XX_BASE + 11) +#define IRQ_IXP4XX_USB (IRQ_IXP4XX_BASE + 12) +#define IRQ_IXP4XX_UART2 (IRQ_IXP4XX_BASE + 13) +#define IRQ_IXP4XX_TIMESTAMP (IRQ_IXP4XX_BASE + 14) +#define IRQ_IXP4XX_UART1 (IRQ_IXP4XX_BASE + 15) +#define IRQ_IXP4XX_WDOG (IRQ_IXP4XX_BASE + 16) +#define IRQ_IXP4XX_AHB_PMU (IRQ_IXP4XX_BASE + 17) +#define IRQ_IXP4XX_XSCALE_PMU (IRQ_IXP4XX_BASE + 18) +#define IRQ_IXP4XX_GPIO2 (IRQ_IXP4XX_BASE + 19) +#define IRQ_IXP4XX_GPIO3 (IRQ_IXP4XX_BASE + 20) +#define IRQ_IXP4XX_GPIO4 (IRQ_IXP4XX_BASE + 21) +#define IRQ_IXP4XX_GPIO5 (IRQ_IXP4XX_BASE + 22) +#define IRQ_IXP4XX_GPIO6 (IRQ_IXP4XX_BASE + 23) +#define IRQ_IXP4XX_GPIO7 (IRQ_IXP4XX_BASE + 24) +#define IRQ_IXP4XX_GPIO8 (IRQ_IXP4XX_BASE + 25) +#define IRQ_IXP4XX_GPIO9 (IRQ_IXP4XX_BASE + 26) +#define IRQ_IXP4XX_GPIO10 (IRQ_IXP4XX_BASE + 27) +#define IRQ_IXP4XX_GPIO11 (IRQ_IXP4XX_BASE + 28) +#define IRQ_IXP4XX_GPIO12 (IRQ_IXP4XX_BASE + 29) +#define IRQ_IXP4XX_SW_INT1 (IRQ_IXP4XX_BASE + 30) +#define IRQ_IXP4XX_SW_INT2 (IRQ_IXP4XX_BASE + 31) +#define IRQ_IXP4XX_USB_HOST (IRQ_IXP4XX_BASE + 32) +#define IRQ_IXP4XX_I2C (IRQ_IXP4XX_BASE + 33) +#define IRQ_IXP4XX_SSP (IRQ_IXP4XX_BASE + 34) +#define IRQ_IXP4XX_TSYNC (IRQ_IXP4XX_BASE + 35) +#define IRQ_IXP4XX_EAU_DONE (IRQ_IXP4XX_BASE + 36) +#define IRQ_IXP4XX_SHA_DONE (IRQ_IXP4XX_BASE + 37) +#define IRQ_IXP4XX_SWCP_PE (IRQ_IXP4XX_BASE + 58) +#define IRQ_IXP4XX_QM_PE (IRQ_IXP4XX_BASE + 60) +#define IRQ_IXP4XX_MCU_ECC (IRQ_IXP4XX_BASE + 61) +#define IRQ_IXP4XX_EXP_PE (IRQ_IXP4XX_BASE + 62) + +#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n) +#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n) + +#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU) + +#endif diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index 318424dd3c50..c1340465b2ea 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -24,6 +24,8 @@ #include <mach/hardware.h> #include <asm/mach-types.h> +#include "irqs.h" + #define MAX_DEV 4 #define IRQ_LINES 4 diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 57d7df79d838..6f0f7ed18ea8 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -32,6 +32,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + #define IXDP425_SDA_PIN 7 #define IXDP425_SCL_PIN 6 diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index 1f8717ba13dc..ac0e9bc6eb4d 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -23,6 +23,8 @@ #include <asm/mach/pci.h> +#include "irqs.h" + void __init ixdpg425_pci_preinit(void) { irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c new file mode 100644 index 000000000000..7449b8319c8a --- /dev/null +++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IXP4xx Device Tree boot support + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/ixp4xx-regs.h> + +static struct map_desc ixp4xx_of_io_desc[] __initdata = { + /* + * This is needed for runtime system configuration checks, + * such as reading if hardware so-and-so is present. This + * could eventually be converted into a syscon once all boards + * are converted to device tree. + */ + { + .virtual = IXP4XX_EXP_CFG_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#ifdef CONFIG_DEBUG_UART_8250 + /* This is needed for LL-debug/earlyprintk/debug-macro.S */ + { + .virtual = CONFIG_DEBUG_UART_VIRT, + .pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#endif +}; + +static void __init ixp4xx_of_map_io(void) +{ + iotable_init(ixp4xx_of_io_desc, ARRAY_SIZE(ixp4xx_of_io_desc)); +} + +/* + * We handle 4 differen SoC families. These compatible strings are enough + * to provide the core so that different boards can add their more detailed + * specifics. + */ +static const char *ixp4xx_of_board_compat[] = { + "intel,ixp42x", + "intel,ixp43x", + "intel,ixp45x", + "intel,ixp46x", + NULL, +}; + +DT_MACHINE_START(IXP4XX_DT, "IXP4xx (Device Tree)") + .map_io = ixp4xx_of_map_io, + .dt_compat = ixp4xx_of_board_compat, +MACHINE_END diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c index 8f0eba0a6800..925ef805f966 100644 --- a/arch/arm/mach-ixp4xx/nas100d-pci.c +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -21,6 +21,8 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> +#include "irqs.h" + #define MAX_DEV 3 #define IRQ_LINES 3 diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 4138d6aa4c52..c142cfa8c5d6 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -34,6 +34,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + #define NAS100D_SDA_PIN 5 #define NAS100D_SCL_PIN 6 @@ -279,9 +281,6 @@ static void __init nas100d_init(void) ixp4xx_sys_init(); - /* gpio 14 and 15 are _not_ clocks */ - *IXP4XX_GPIO_GPCLKR = 0; - nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); nas100d_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index 032defe111aa..d69ee4066d20 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -21,6 +21,8 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> +#include "irqs.h" + #define MAX_DEV 3 #define IRQ_LINES 3 diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 341b263482ef..ee1877fcfafe 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -32,6 +32,8 @@ #include <asm/mach/flash.h> #include <asm/mach/time.h> +#include "irqs.h" + #define NSLU2_SDA_PIN 7 #define NSLU2_SCL_PIN 6 @@ -125,10 +127,18 @@ static struct platform_device nslu2_i2c_gpio = { }, }; +static struct resource nslu2_beeper_resources[] = { + { + .start = IRQ_IXP4XX_TIMER2, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device nslu2_beeper = { .name = "ixp4xx-beeper", .id = NSLU2_GPIO_BUZZ, - .num_resources = 0, + .resource = nslu2_beeper_resources, + .num_resources = ARRAY_SIZE(nslu2_beeper_resources), }; static struct resource nslu2_uart_resources[] = { diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c index c92e5b82af36..cf83f7e24179 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-pci.c +++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c @@ -27,6 +27,8 @@ #include <asm/mach/pci.h> +#include "irqs.h" + void __init wg302v2_pci_preinit(void) { irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index 90b3c604e8b6..8711e299229b 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -29,6 +29,8 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include "irqs.h" + static struct flash_platform_data wg302v2_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index b3be60a8e467..66701bf43248 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Platform support for LPC32xx SoC * @@ -5,44 +6,14 @@ * * Copyright (C) 2012 Roland Stigge <stigge@antcom.de> * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> #include <linux/amba/pl08x.h> -#include <linux/amba/mmci.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/clk.h> -#include <linux/mtd/lpc32xx_slc.h> #include <linux/mtd/lpc32xx_mlc.h> +#include <linux/mtd/lpc32xx_slc.h> +#include <linux/of_platform.h> -#include <asm/setup.h> -#include <asm/mach-types.h> #include <asm/mach/arch.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include <mach/board.h> #include "common.h" static struct pl08x_channel_data pl08x_slave_channels[] = { @@ -90,8 +61,6 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = { }; static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL), - OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL), OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd), OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash", &lpc32xx_slc_data), @@ -104,11 +73,6 @@ static void __init lpc3250_machine_init(void) { lpc32xx_serial_init(); - /* Test clock needed for UDA1380 initial init */ - __raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC | - LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN, - LPC32XX_CLKPWR_TEST_CLK_SEL); - of_platform_default_populate(NULL, lpc32xx_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 129455e822e4..6316da3623b3 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -336,6 +336,15 @@ static inline void omap5_secondary_hyp_startup(void) } #endif +#ifdef CONFIG_SOC_DRA7XX +extern int dra7xx_pciess_reset(struct omap_hwmod *oh); +#else +static inline int dra7xx_pciess_reset(struct omap_hwmod *oh) +{ + return 0; +} +#endif + void pdata_quirks_init(const struct of_device_id *); void omap_auxdata_legacy_init(struct device *dev); void omap_pcs_legacy_init(int irq, void (*rearm)(void)); diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index 37ff25ee3d89..1d8efc303daf 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -53,15 +53,10 @@ int omap_i2c_reset(struct omap_hwmod *oh) u16 i2c_con; int c = 0; - if (oh->class->rev == OMAP_I2C_IP_VERSION_2) { - i2c_con = OMAP4_I2C_CON_OFFSET; - } else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) { + if (soc_is_omap24xx() || soc_is_omap34xx() || soc_is_am35xx()) i2c_con = OMAP2_I2C_CON_OFFSET; - } else { - WARN(1, "Cannot reset I2C block %s: unsupported revision\n", - oh->name); - return -EINVAL; - } + else + i2c_con = OMAP4_I2C_CON_OFFSET; /* Disable I2C */ v = omap_hwmod_read(oh, i2c_con); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index bb8e0bb7ef5d..5e69c8caa1db 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -411,14 +411,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) static void __init __maybe_unused omap_hwmod_init_postsetup(void) { - u8 postsetup_state; + u8 postsetup_state = _HWMOD_STATE_DEFAULT; /* Set the default postsetup state for all hwmods */ -#ifdef CONFIG_PM - postsetup_state = _HWMOD_STATE_IDLE; -#else - postsetup_state = _HWMOD_STATE_ENABLED; -#endif omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state); } diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h index 9145a6f720fc..7f4e053c3434 100644 --- a/arch/arm/mach-omap2/mmc.h +++ b/arch/arm/mach-omap2/mmc.h @@ -7,7 +7,15 @@ #define OMAP4_MMC_REG_OFFSET 0x100 struct omap_hwmod; + +#ifdef CONFIG_SOC_OMAP2420 int omap_msdi_reset(struct omap_hwmod *oh); +#else +static inline int omap_msdi_reset(struct omap_hwmod *oh) +{ + return 0; +} +#endif /* called from board-specific card detection service routine */ extern void omap_mmc_notify_cover_event(struct device *dev, int slot, diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 17558be4bf0a..7dcbe1736f7e 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -436,13 +436,13 @@ static int irq_notifier(struct notifier_block *self, unsigned long cmd, void *v) { switch (cmd) { case CPU_CLUSTER_PM_ENTER: - if (omap_type() == OMAP2_DEVICE_TYPE_GP) + if (omap_type() == OMAP2_DEVICE_TYPE_GP || soc_is_am43xx()) irq_save_context(); else irq_save_secure_context(); break; case CPU_CLUSTER_PM_EXIT: - if (omap_type() == OMAP2_DEVICE_TYPE_GP) + if (omap_type() == OMAP2_DEVICE_TYPE_GP || soc_is_am43xx()) irq_restore_context(); break; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index baadddf9aad4..405ac24def05 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -155,6 +155,8 @@ #include "soc.h" #include "common.h" #include "clockdomain.h" +#include "hdq1w.h" +#include "mmc.h" #include "powerdomain.h" #include "cm2xxx.h" #include "cm3xxx.h" @@ -165,6 +167,7 @@ #include "prm33xx.h" #include "prminst44xx.h" #include "pm.h" +#include "wd_timer.h" /* Name of the OMAP hwmod for the MPU */ #define MPU_INITIATOR_NAME "mpu" @@ -205,6 +208,20 @@ struct clkctrl_provider { static LIST_HEAD(clkctrl_providers); /** + * struct omap_hwmod_reset - IP specific reset functions + * @match: string to match against the module name + * @len: number of characters to match + * @reset: IP specific reset function + * + * Used only in cases where struct omap_hwmod is dynamically allocated. + */ +struct omap_hwmod_reset { + const char *match; + int len; + int (*reset)(struct omap_hwmod *oh); +}; + +/** * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations * @enable_module: function to enable a module (via MODULEMODE) * @disable_module: function to disable a module (via MODULEMODE) @@ -235,6 +252,7 @@ static struct omap_hwmod_soc_ops soc_ops; /* omap_hwmod_list contains all registered struct omap_hwmods */ static LIST_HEAD(omap_hwmod_list); +static DEFINE_MUTEX(list_lock); /* mpu_oh: used to add/remove MPU initiator from sleepdep list */ static struct omap_hwmod *mpu_oh; @@ -2465,7 +2483,7 @@ static void _setup_iclk_autoidle(struct omap_hwmod *oh) */ static int _setup_reset(struct omap_hwmod *oh) { - int r; + int r = 0; if (oh->_state != _HWMOD_STATE_INITIALIZED) return -EINVAL; @@ -2624,7 +2642,7 @@ static int _setup(struct omap_hwmod *oh, void *data) * that the copy process would be relatively complex due to the large number * of substructures. */ -static int __init _register(struct omap_hwmod *oh) +static int _register(struct omap_hwmod *oh) { if (!oh || !oh->name || !oh->class || !oh->class->name || (oh->_state != _HWMOD_STATE_UNKNOWN)) @@ -2663,7 +2681,7 @@ static int __init _register(struct omap_hwmod *oh) * locking in this code. Changes to this assumption will require * additional locking. Returns 0. */ -static int __init _add_link(struct omap_hwmod_ocp_if *oi) +static int _add_link(struct omap_hwmod_ocp_if *oi) { pr_debug("omap_hwmod: %s -> %s: adding link\n", oi->master->name, oi->slave->name); @@ -3241,9 +3259,10 @@ static int omap_hwmod_init_regbits(struct device *dev, * @sysc_offs: sysc register offset * @syss_offs: syss register offset */ -int omap_hwmod_init_reg_offs(struct device *dev, - const struct ti_sysc_module_data *data, - s32 *rev_offs, s32 *sysc_offs, s32 *syss_offs) +static int omap_hwmod_init_reg_offs(struct device *dev, + const struct ti_sysc_module_data *data, + s32 *rev_offs, s32 *sysc_offs, + s32 *syss_offs) { *rev_offs = -ENODEV; *sysc_offs = 0; @@ -3267,9 +3286,9 @@ int omap_hwmod_init_reg_offs(struct device *dev, * @data: module data * @sysc_flags: module configuration */ -int omap_hwmod_init_sysc_flags(struct device *dev, - const struct ti_sysc_module_data *data, - u32 *sysc_flags) +static int omap_hwmod_init_sysc_flags(struct device *dev, + const struct ti_sysc_module_data *data, + u32 *sysc_flags) { *sysc_flags = 0; @@ -3341,9 +3360,9 @@ int omap_hwmod_init_sysc_flags(struct device *dev, * @data: module data * @idlemodes: module supported idle modes */ -int omap_hwmod_init_idlemodes(struct device *dev, - const struct ti_sysc_module_data *data, - u32 *idlemodes) +static int omap_hwmod_init_idlemodes(struct device *dev, + const struct ti_sysc_module_data *data, + u32 *idlemodes) { *idlemodes = 0; @@ -3434,14 +3453,18 @@ static int omap_hwmod_check_module(struct device *dev, * * Note that the allocations here cannot use devm as ti-sysc can rebind. */ -int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, - const struct ti_sysc_module_data *data, - struct sysc_regbits *sysc_fields, - s32 rev_offs, s32 sysc_offs, s32 syss_offs, - u32 sysc_flags, u32 idlemodes) +static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, + const struct ti_sysc_module_data *data, + struct sysc_regbits *sysc_fields, + s32 rev_offs, s32 sysc_offs, + s32 syss_offs, u32 sysc_flags, + u32 idlemodes) { struct omap_hwmod_class_sysconfig *sysc; - struct omap_hwmod_class *class; + struct omap_hwmod_class *class = NULL; + struct omap_hwmod_ocp_if *oi = NULL; + struct clockdomain *clkdm = NULL; + struct clk *clk = NULL; void __iomem *regs = NULL; unsigned long flags; @@ -3465,26 +3488,128 @@ int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, } /* - * We need new oh->class as the other devices in the same class + * We may need a new oh->class as the other devices in the same class * may not yet have ioremapped their registers. */ - class = kmemdup(oh->class, sizeof(*oh->class), GFP_KERNEL); - if (!class) - return -ENOMEM; + if (oh->class->name && strcmp(oh->class->name, data->name)) { + class = kmemdup(oh->class, sizeof(*oh->class), GFP_KERNEL); + if (!class) + return -ENOMEM; + } - class->sysc = sysc; + if (list_empty(&oh->slave_ports)) { + oi = kcalloc(1, sizeof(*oi), GFP_KERNEL); + if (!oi) + return -ENOMEM; + + /* + * Note that we assume interconnect interface clocks will be + * managed by the interconnect driver for OCPIF_SWSUP_IDLE case + * on omap24xx and omap3. + */ + oi->slave = oh; + oi->user = OCP_USER_MPU | OCP_USER_SDMA; + } + + if (!oh->_clk) { + struct clk_hw_omap *hwclk; + + clk = of_clk_get_by_name(dev->of_node, "fck"); + if (!IS_ERR(clk)) + clk_prepare(clk); + else + clk = NULL; + + /* + * Populate clockdomain based on dts clock. It is needed for + * clkdm_deny_idle() and clkdm_allow_idle() until we have have + * interconnect driver and reset driver capable of blocking + * clockdomain idle during reset, enable and idle. + */ + if (clk) { + hwclk = to_clk_hw_omap(__clk_get_hw(clk)); + if (hwclk && hwclk->clkdm_name) + clkdm = clkdm_lookup(hwclk->clkdm_name); + } + + /* + * Note that we assume interconnect driver manages the clocks + * and do not need to populate oh->_clk for dynamically + * allocated modules. + */ + clk_unprepare(clk); + clk_put(clk); + } spin_lock_irqsave(&oh->_lock, flags); if (regs) oh->_mpu_rt_va = regs; - oh->class = class; + if (class) + oh->class = class; + oh->class->sysc = sysc; + if (oi) + _add_link(oi); + if (clkdm) + oh->clkdm = clkdm; oh->_state = _HWMOD_STATE_INITIALIZED; + oh->_postsetup_state = _HWMOD_STATE_DEFAULT; _setup(oh, NULL); spin_unlock_irqrestore(&oh->_lock, flags); return 0; } +static const struct omap_hwmod_reset omap24xx_reset_quirks[] = { + { .match = "msdi", .len = 4, .reset = omap_msdi_reset, }, +}; + +static const struct omap_hwmod_reset dra7_reset_quirks[] = { + { .match = "pcie", .len = 4, .reset = dra7xx_pciess_reset, }, +}; + +static const struct omap_hwmod_reset omap_reset_quirks[] = { + { .match = "dss", .len = 3, .reset = omap_dss_reset, }, + { .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, }, + { .match = "i2c", .len = 3, .reset = omap_i2c_reset, }, + { .match = "wd_timer", .len = 8, .reset = omap2_wd_timer_reset, }, +}; + +static void +omap_hwmod_init_reset_quirk(struct device *dev, struct omap_hwmod *oh, + const struct ti_sysc_module_data *data, + const struct omap_hwmod_reset *quirks, + int quirks_sz) +{ + const struct omap_hwmod_reset *quirk; + int i; + + for (i = 0; i < quirks_sz; i++) { + quirk = &quirks[i]; + if (!strncmp(data->name, quirk->match, quirk->len)) { + oh->class->reset = quirk->reset; + + return; + } + } +} + +static void +omap_hwmod_init_reset_quirks(struct device *dev, struct omap_hwmod *oh, + const struct ti_sysc_module_data *data) +{ + if (soc_is_omap24xx()) + omap_hwmod_init_reset_quirk(dev, oh, data, + omap24xx_reset_quirks, + ARRAY_SIZE(omap24xx_reset_quirks)); + + if (soc_is_dra7xx()) + omap_hwmod_init_reset_quirk(dev, oh, data, dra7_reset_quirks, + ARRAY_SIZE(dra7_reset_quirks)); + + omap_hwmod_init_reset_quirk(dev, oh, data, omap_reset_quirks, + ARRAY_SIZE(omap_reset_quirks)); +} + /** * omap_hwmod_init_module - initialize new module * @dev: struct device @@ -3505,8 +3630,31 @@ int omap_hwmod_init_module(struct device *dev, return -EINVAL; oh = _lookup(data->name); - if (!oh) - return -ENODEV; + if (!oh) { + oh = kzalloc(sizeof(*oh), GFP_KERNEL); + if (!oh) + return -ENOMEM; + + oh->name = data->name; + oh->_state = _HWMOD_STATE_UNKNOWN; + lockdep_register_key(&oh->hwmod_key); + + /* Unused, can be handled by PRM driver handling resets */ + oh->prcm.omap4.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT; + + oh->class = kzalloc(sizeof(*oh->class), GFP_KERNEL); + if (!oh->class) { + kfree(oh); + return -ENOMEM; + } + + omap_hwmod_init_reset_quirks(dev, oh, data); + + oh->class->name = data->name; + mutex_lock(&list_lock); + error = _register(oh); + mutex_unlock(&list_lock); + } cookie->data = oh; @@ -3527,10 +3675,20 @@ int omap_hwmod_init_module(struct device *dev, if (error) return error; + if (data->cfg->quirks & SYSC_QUIRK_NO_IDLE) + oh->flags |= HWMOD_NO_IDLE; if (data->cfg->quirks & SYSC_QUIRK_NO_IDLE_ON_INIT) oh->flags |= HWMOD_INIT_NO_IDLE; if (data->cfg->quirks & SYSC_QUIRK_NO_RESET_ON_INIT) oh->flags |= HWMOD_INIT_NO_RESET; + if (data->cfg->quirks & SYSC_QUIRK_USE_CLOCKACT) + oh->flags |= HWMOD_SET_DEFAULT_CLOCKACT; + if (data->cfg->quirks & SYSC_QUIRK_SWSUP_SIDLE) + oh->flags |= HWMOD_SWSUP_SIDLE; + if (data->cfg->quirks & SYSC_QUIRK_SWSUP_SIDLE_ACT) + oh->flags |= HWMOD_SWSUP_SIDLE_ACT; + if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY) + oh->flags |= HWMOD_SWSUP_MSTANDBY; error = omap_hwmod_check_module(dev, oh, data, sysc_fields, rev_offs, sysc_offs, syss_offs, diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index b70cdc21f8a2..fca9e072154b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -493,11 +493,16 @@ struct omap_hwmod_omap4_prcm { #define _HWMOD_STATE_IDLE 5 #define _HWMOD_STATE_DISABLED 6 +#ifdef CONFIG_PM +#define _HWMOD_STATE_DEFAULT _HWMOD_STATE_IDLE +#else +#define _HWMOD_STATE_DEFAULT _HWMOD_STATE_ENABLED +#endif + /** * struct omap_hwmod_class - the type of an IP block * @name: name of the hwmod_class * @sysc: device SYSCONFIG/SYSSTATUS register data - * @rev: revision of the IP class * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown * @reset: ptr to fn to be executed in place of the standard hwmod reset fn * @enable_preprogram: ptr to fn to be executed during device enable @@ -523,7 +528,6 @@ struct omap_hwmod_omap4_prcm { struct omap_hwmod_class { const char *name; struct omap_hwmod_class_sysconfig *sysc; - u32 rev; int (*pre_shutdown)(struct omap_hwmod *oh); int (*reset)(struct omap_hwmod *oh); int (*enable_preprogram)(struct omap_hwmod *oh); diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index d684fac8f592..8122c8d4b69a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -91,7 +91,6 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = { static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_1, .reset = &omap_i2c_reset, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index abef9f6f9bf5..f27cb60bde77 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -68,7 +68,6 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = { static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_1, .reset = &omap_i2c_reset, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 5345919a81f8..ed5f39d948de 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -96,7 +96,6 @@ static struct omap_hwmod_class_sysconfig omap2xxx_gpio_sysc = { struct omap_hwmod_class omap2xxx_gpio_hwmod_class = { .name = "gpio", .sysc = &omap2xxx_gpio_sysc, - .rev = 0, }; /* system dma */ diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index 6f81d7a4fec1..aaa6092426ea 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -30,24 +30,16 @@ extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx; extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc; extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan0; extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan1; -extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio1; -extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio2; -extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio3; extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio; extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2; extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc; -extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2; -extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3; extern struct omap_hwmod_ocp_if am33xx_l4_per__mailbox; extern struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1; -extern struct omap_hwmod_ocp_if am33xx_l3_s__mmc2; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0; extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1; extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2; @@ -60,11 +52,6 @@ extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc; extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0; extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1; extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart2; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart3; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart4; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart5; -extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart6; extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc; extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0; extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0; @@ -93,19 +80,10 @@ extern struct omap_hwmod am33xx_elm_hwmod; extern struct omap_hwmod am33xx_epwmss0_hwmod; extern struct omap_hwmod am33xx_epwmss1_hwmod; extern struct omap_hwmod am33xx_epwmss2_hwmod; -extern struct omap_hwmod am33xx_gpio1_hwmod; -extern struct omap_hwmod am33xx_gpio2_hwmod; -extern struct omap_hwmod am33xx_gpio3_hwmod; extern struct omap_hwmod am33xx_gpmc_hwmod; -extern struct omap_hwmod am33xx_i2c1_hwmod; -extern struct omap_hwmod am33xx_i2c2_hwmod; -extern struct omap_hwmod am33xx_i2c3_hwmod; extern struct omap_hwmod am33xx_mailbox_hwmod; extern struct omap_hwmod am33xx_mcasp0_hwmod; extern struct omap_hwmod am33xx_mcasp1_hwmod; -extern struct omap_hwmod am33xx_mmc0_hwmod; -extern struct omap_hwmod am33xx_mmc1_hwmod; -extern struct omap_hwmod am33xx_mmc2_hwmod; extern struct omap_hwmod am33xx_rtc_hwmod; extern struct omap_hwmod am33xx_spi0_hwmod; extern struct omap_hwmod am33xx_spi1_hwmod; @@ -121,19 +99,12 @@ extern struct omap_hwmod am33xx_tpcc_hwmod; extern struct omap_hwmod am33xx_tptc0_hwmod; extern struct omap_hwmod am33xx_tptc1_hwmod; extern struct omap_hwmod am33xx_tptc2_hwmod; -extern struct omap_hwmod am33xx_uart1_hwmod; -extern struct omap_hwmod am33xx_uart2_hwmod; -extern struct omap_hwmod am33xx_uart3_hwmod; -extern struct omap_hwmod am33xx_uart4_hwmod; -extern struct omap_hwmod am33xx_uart5_hwmod; -extern struct omap_hwmod am33xx_uart6_hwmod; extern struct omap_hwmod am33xx_wd_timer1_hwmod; extern struct omap_hwmod_class am33xx_emif_hwmod_class; extern struct omap_hwmod_class am33xx_l4_hwmod_class; extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class; extern struct omap_hwmod_class am33xx_control_hwmod_class; -extern struct omap_hwmod_class am33xx_gpio_hwmod_class; extern struct omap_hwmod_class am33xx_timer_hwmod_class; extern struct omap_hwmod_class am33xx_epwmss_hwmod_class; extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index e0001232bb4f..47a0e301b193 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -122,30 +122,6 @@ struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4 per/ls -> GPIO2 */ -struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_gpio1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 per/ls -> gpio3 */ -struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_gpio2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 per/ls -> gpio4 */ -struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_gpio3_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = { .master = &am33xx_cpgmac0_hwmod, .slave = &am33xx_mdio_hwmod, @@ -188,21 +164,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { .user = OCP_USER_MPU, }; -/* i2c2 */ -struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_i2c2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_i2c3_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l4 ls -> mailbox */ struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = { .master = &am33xx_l4_ls_hwmod, @@ -235,30 +196,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = { .user = OCP_USER_MPU, }; -/* l4 ls -> mmc0 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mmc0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> mmc1 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_mmc1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l3 s -> mmc2 */ -struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = { - .master = &am33xx_l3_s_hwmod, - .slave = &am33xx_mmc2_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU, -}; - /* l4 ls -> mcspi0 */ struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = { .master = &am33xx_l4_ls_hwmod, @@ -355,46 +292,6 @@ struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = { .user = OCP_USER_MPU, }; -/* l4 ls -> uart2 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart3 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart3_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart4 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart4_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart5 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart5_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -/* l4 ls -> uart6 */ -struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am33xx_uart6_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l3 main -> ocmc */ struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = { .master = &am33xx_l3_main_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 9ded7bf972e7..4c3543bae562 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -16,9 +16,7 @@ #include <linux/types.h> -#include <linux/platform_data/hsmmc-omap.h> #include "omap_hwmod.h" -#include "i2c.h" #include "wd_timer.h" #include "cm33xx.h" #include "prm33xx.h" @@ -534,7 +532,6 @@ static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = { struct omap_hwmod_class am33xx_gpio_hwmod_class = { .name = "gpio", .sysc = &am33xx_gpio_sysc, - .rev = 2, }; /* gpio1 */ @@ -627,68 +624,6 @@ struct omap_hwmod am33xx_gpmc_hwmod = { }, }; -/* 'i2c' class */ -static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0010, - .syss_offs = 0x0090, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class i2c_class = { - .name = "i2c", - .sysc = &am33xx_i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_2, - .reset = &omap_i2c_reset, -}; - -/* i2c1 */ -struct omap_hwmod am33xx_i2c1_hwmod = { - .name = "i2c1", - .class = &i2c_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "dpll_per_m2_div4_wkupdm_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c1 */ -struct omap_hwmod am33xx_i2c2_hwmod = { - .name = "i2c2", - .class = &i2c_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c3 */ -struct omap_hwmod am33xx_i2c3_hwmod = { - .name = "i2c3", - .class = &i2c_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* * 'mailbox' class * mailbox module allowing communication between the on-chip processors using a @@ -762,76 +697,6 @@ struct omap_hwmod am33xx_mcasp1_hwmod = { }, }; -/* 'mmc' class */ -static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = { - .rev_offs = 0x2fc, - .sysc_offs = 0x110, - .syss_offs = 0x114, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am33xx_mmc_hwmod_class = { - .name = "mmc", - .sysc = &am33xx_mmc_sysc, -}; - -/* mmc0 */ -static struct omap_hsmmc_dev_attr am33xx_mmc0_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -struct omap_hwmod am33xx_mmc0_hwmod = { - .name = "mmc1", - .class = &am33xx_mmc_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "mmc_clk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &am33xx_mmc0_dev_attr, -}; - -/* mmc1 */ -static struct omap_hsmmc_dev_attr am33xx_mmc1_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -struct omap_hwmod am33xx_mmc1_hwmod = { - .name = "mmc2", - .class = &am33xx_mmc_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "mmc_clk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &am33xx_mmc1_dev_attr, -}; - -/* mmc2 */ -static struct omap_hsmmc_dev_attr am33xx_mmc2_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; -struct omap_hwmod am33xx_mmc2_hwmod = { - .name = "mmc3", - .class = &am33xx_mmc_hwmod_class, - .clkdm_name = "l3s_clkdm", - .main_clk = "mmc_clk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &am33xx_mmc2_dev_attr, -}; - /* * 'rtc' class * rtc subsystem @@ -1132,102 +997,6 @@ struct omap_hwmod am33xx_tptc2_hwmod = { }, }; -/* 'uart' class */ -static struct omap_hwmod_class_sysconfig uart_sysc = { - .rev_offs = 0x50, - .sysc_offs = 0x54, - .syss_offs = 0x58, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class uart_class = { - .name = "uart", - .sysc = &uart_sysc, -}; - -struct omap_hwmod am33xx_uart1_hwmod = { - .name = "uart1", - .class = &uart_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_wkupdm_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -struct omap_hwmod am33xx_uart2_hwmod = { - .name = "uart2", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart3 */ -struct omap_hwmod am33xx_uart3_hwmod = { - .name = "uart3", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -struct omap_hwmod am33xx_uart4_hwmod = { - .name = "uart4", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -struct omap_hwmod am33xx_uart5_hwmod = { - .name = "uart5", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -struct omap_hwmod am33xx_uart6_hwmod = { - .name = "uart6", - .class = &uart_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "dpll_per_m2_div4_ck", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* 'wd_timer' class */ static struct omap_hwmod_class_sysconfig wdt_sysc = { .rev_offs = 0x0, @@ -1265,11 +1034,6 @@ struct omap_hwmod am33xx_wd_timer1_hwmod = { static void omap_hwmod_am33xx_clkctrl(void) { - CLKCTRL(am33xx_uart2_hwmod, AM33XX_CM_PER_UART1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart3_hwmod, AM33XX_CM_PER_UART2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart4_hwmod, AM33XX_CM_PER_UART3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart5_hwmod, AM33XX_CM_PER_UART4_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart6_hwmod, AM33XX_CM_PER_UART5_CLKCTRL_OFFSET); CLKCTRL(am33xx_dcan0_hwmod, AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET); CLKCTRL(am33xx_dcan1_hwmod, AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET); CLKCTRL(am33xx_elm_hwmod, AM33XX_CM_PER_ELM_CLKCTRL_OFFSET); @@ -1279,13 +1043,9 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_gpio1_hwmod, AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpio2_hwmod, AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpio3_hwmod, AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c2_hwmod, AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c3_hwmod, AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET); CLKCTRL(am33xx_mailbox_hwmod, AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_mcasp0_hwmod, AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET); CLKCTRL(am33xx_mcasp1_hwmod, AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc0_hwmod, AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc1_hwmod, AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi0_hwmod, AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi1_hwmod, AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spinlock_hwmod, AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET); @@ -1299,13 +1059,10 @@ static void omap_hwmod_am33xx_clkctrl(void) AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex1_hwmod, AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart1_hwmod, AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer1_hwmod, AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET); CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET); PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); @@ -1340,11 +1097,6 @@ void omap_hwmod_am33xx_reg(void) static void omap_hwmod_am43xx_clkctrl(void) { - CLKCTRL(am33xx_uart2_hwmod, AM43XX_CM_PER_UART1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart3_hwmod, AM43XX_CM_PER_UART2_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart4_hwmod, AM43XX_CM_PER_UART3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart5_hwmod, AM43XX_CM_PER_UART4_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart6_hwmod, AM43XX_CM_PER_UART5_CLKCTRL_OFFSET); CLKCTRL(am33xx_dcan0_hwmod, AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET); CLKCTRL(am33xx_dcan1_hwmod, AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET); CLKCTRL(am33xx_elm_hwmod, AM43XX_CM_PER_ELM_CLKCTRL_OFFSET); @@ -1354,13 +1106,9 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_gpio1_hwmod, AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpio2_hwmod, AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpio3_hwmod, AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c2_hwmod, AM43XX_CM_PER_I2C1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c3_hwmod, AM43XX_CM_PER_I2C2_CLKCTRL_OFFSET); CLKCTRL(am33xx_mailbox_hwmod, AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_mcasp0_hwmod, AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET); CLKCTRL(am33xx_mcasp1_hwmod, AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc0_hwmod, AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc1_hwmod, AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi0_hwmod, AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET); CLKCTRL(am33xx_spi1_hwmod, AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET); CLKCTRL(am33xx_spinlock_hwmod, AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET); @@ -1374,12 +1122,9 @@ static void omap_hwmod_am43xx_clkctrl(void) AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET); CLKCTRL(am33xx_smartreflex1_hwmod, AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_uart1_hwmod, AM43XX_CM_WKUP_UART0_CLKCTRL_OFFSET); CLKCTRL(am33xx_timer1_hwmod, AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_i2c1_hwmod, AM43XX_CM_WKUP_I2C0_CLKCTRL_OFFSET); CLKCTRL(am33xx_wd_timer1_hwmod, AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET); - CLKCTRL(am33xx_mmc2_hwmod, AM43XX_CM_PER_MMC2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index c9483bc06228..c965af275e34 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -14,8 +14,6 @@ * GNU General Public License for more details. */ -#include <linux/platform_data/i2c-omap.h> - #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" @@ -23,7 +21,6 @@ #include "cm33xx.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" -#include "i2c.h" #include "wd_timer.h" #include "omap_hwmod_33xx_43xx_common_data.h" @@ -230,27 +227,6 @@ static struct omap_hwmod am33xx_control_hwmod = { }, }; -/* gpio0 */ -static struct omap_hwmod_opt_clk gpio0_opt_clks[] = { - { .role = "dbclk", .clk = "gpio0_dbclk" }, -}; - -static struct omap_hwmod am33xx_gpio0_hwmod = { - .name = "gpio1", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "dpll_core_m4_div2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio0_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio0_opt_clks), -}; - /* lcdc */ static struct omap_hwmod_class_sysconfig lcdc_sysc = { .rev_offs = 0x0, @@ -388,22 +364,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = { .user = OCP_USER_MPU, }; -/* L4 WKUP -> I2C1 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__i2c1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_i2c1_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU, -}; - -/* L4 WKUP -> GPIO1 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__gpio0 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_gpio0_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* L4 WKUP -> ADC_TSC */ static struct omap_hwmod_ocp_if am33xx_l4_wkup__adc_tsc = { .master = &am33xx_l4_wkup_hwmod, @@ -434,14 +394,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = { .user = OCP_USER_MPU, }; -/* l4 wkup -> uart1 */ -static struct omap_hwmod_ocp_if am33xx_l4_wkup__uart1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_uart1_hwmod, - .clk = "dpll_core_m4_div2_ck", - .user = OCP_USER_MPU, -}; - /* l4 wkup -> wd_timer1 */ static struct omap_hwmod_ocp_if am33xx_l4_wkup__wd_timer1 = { .master = &am33xx_l4_wkup_hwmod, @@ -479,27 +431,16 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__control, &am33xx_l4_wkup__smartreflex0, &am33xx_l4_wkup__smartreflex1, - &am33xx_l4_wkup__uart1, &am33xx_l4_wkup__timer1, &am33xx_l4_wkup__rtc, - &am33xx_l4_wkup__i2c1, - &am33xx_l4_wkup__gpio0, &am33xx_l4_wkup__adc_tsc, &am33xx_l4_wkup__wd_timer1, &am33xx_l4_hs__pruss, &am33xx_l4_per__dcan0, &am33xx_l4_per__dcan1, - &am33xx_l4_per__gpio1, - &am33xx_l4_per__gpio2, - &am33xx_l4_per__gpio3, - &am33xx_l4_per__i2c2, - &am33xx_l4_per__i2c3, &am33xx_l4_per__mailbox, &am33xx_l4_ls__mcasp0, &am33xx_l4_ls__mcasp1, - &am33xx_l4_ls__mmc0, - &am33xx_l4_ls__mmc1, - &am33xx_l3_s__mmc2, &am33xx_l4_ls__timer2, &am33xx_l4_ls__timer3, &am33xx_l4_ls__timer4, @@ -507,11 +448,6 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_ls__timer6, &am33xx_l4_ls__timer7, &am33xx_l3_main__tpcc, - &am33xx_l4_ls__uart2, - &am33xx_l4_ls__uart3, - &am33xx_l4_ls__uart4, - &am33xx_l4_ls__uart5, - &am33xx_l4_ls__uart6, &am33xx_l4_ls__spinlock, &am33xx_l4_ls__elm, &am33xx_l4_ls__epwmss0, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 23e6a41a18eb..edff39921bf8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -484,7 +484,6 @@ static struct omap_hwmod am35xx_uart4_hwmod = { static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_1, .reset = &omap_i2c_reset, }; @@ -707,7 +706,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_gpio_sysc = { static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = { .name = "gpio", .sysc = &omap3xxx_gpio_sysc, - .rev = 1, }; /* gpio1 */ @@ -1029,7 +1027,6 @@ static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = { static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = { .name = "smartreflex", .sysc = &omap34xx_sr_sysc, - .rev = 1, }; static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = { @@ -1044,7 +1041,6 @@ static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = { static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = { .name = "smartreflex", .sysc = &omap36xx_sr_sysc, - .rev = 2, }; /* SR1 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index aa271ac5ebac..69571abc14fd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -87,26 +87,6 @@ static struct omap_hwmod am43xx_control_hwmod = { }, }; -static struct omap_hwmod_opt_clk gpio0_opt_clks[] = { - { .role = "dbclk", .clk = "gpio0_dbclk" }, -}; - -static struct omap_hwmod am43xx_gpio0_hwmod = { - .name = "gpio1", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "sys_clkin_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio0_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio0_opt_clks), -}; - static struct omap_hwmod_class_sysconfig am43xx_synctimer_sysc = { .rev_offs = 0x0, .sysc_offs = 0x4, @@ -264,46 +244,6 @@ static struct omap_hwmod am43xx_spi4_hwmod = { }, }; -static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { - { .role = "dbclk", .clk = "gpio4_dbclk" }, -}; - -static struct omap_hwmod am43xx_gpio4_hwmod = { - .name = "gpio5", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_GPIO4_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), -}; - -static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { - { .role = "dbclk", .clk = "gpio5_dbclk" }, -}; - -static struct omap_hwmod am43xx_gpio5_hwmod = { - .name = "gpio6", - .class = &am33xx_gpio_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4ls_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_GPIO5_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = gpio5_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), -}; - static struct omap_hwmod_class am43xx_ocp2scp_hwmod_class = { .name = "ocp2scp", }; @@ -650,20 +590,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_l4_wkup__i2c1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_i2c1_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_wkup__gpio0 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am43xx_gpio0_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if am43xx_l4_wkup__adc_tsc = { .master = &am33xx_l4_wkup_hwmod, .slave = &am43xx_adc_tsc_hwmod, @@ -685,13 +611,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_l4_wkup__uart1 = { - .master = &am33xx_l4_wkup_hwmod, - .slave = &am33xx_uart1_hwmod, - .clk = "sys_clkin_ck", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if am43xx_l4_wkup__wd_timer1 = { .master = &am33xx_l4_wkup_hwmod, .slave = &am33xx_wd_timer1_hwmod, @@ -776,20 +695,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi4 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio4 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_gpio4_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio5 = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_gpio5_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp0 = { .master = &am33xx_l4_ls_hwmod, .slave = &am43xx_ocp2scp0_hwmod, @@ -907,8 +812,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_ls__mcspi2, &am43xx_l4_ls__mcspi3, &am43xx_l4_ls__mcspi4, - &am43xx_l4_ls__gpio4, - &am43xx_l4_ls__gpio5, &am43xx_l3_main__pruss, &am33xx_mpu__l3_main, &am33xx_mpu__prcm, @@ -927,27 +830,16 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_wkup__control, &am43xx_l4_wkup__smartreflex0, &am43xx_l4_wkup__smartreflex1, - &am43xx_l4_wkup__uart1, &am43xx_l4_wkup__timer1, - &am43xx_l4_wkup__i2c1, - &am43xx_l4_wkup__gpio0, &am43xx_l4_wkup__wd_timer1, &am43xx_l4_wkup__adc_tsc, &am43xx_l3_s__qspi, &am33xx_l4_per__dcan0, &am33xx_l4_per__dcan1, - &am33xx_l4_per__gpio1, - &am33xx_l4_per__gpio2, - &am33xx_l4_per__gpio3, - &am33xx_l4_per__i2c2, - &am33xx_l4_per__i2c3, &am33xx_l4_per__mailbox, &am33xx_l4_per__rng, &am33xx_l4_ls__mcasp0, &am33xx_l4_ls__mcasp1, - &am33xx_l4_ls__mmc0, - &am33xx_l4_ls__mmc1, - &am33xx_l3_s__mmc2, &am33xx_l4_ls__timer2, &am33xx_l4_ls__timer3, &am33xx_l4_ls__timer4, @@ -955,11 +847,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_ls__timer6, &am33xx_l4_ls__timer7, &am33xx_l3_main__tpcc, - &am33xx_l4_ls__uart2, - &am33xx_l4_ls__uart3, - &am33xx_l4_ls__uart4, - &am33xx_l4_ls__uart5, - &am33xx_l4_ls__uart6, &am33xx_l4_ls__spinlock, &am33xx_l4_ls__elm, &am33xx_l4_ls__epwmss0, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index a95dbac57a81..b8de550a15b4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -21,9 +21,7 @@ */ #include <linux/io.h> -#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> -#include <linux/platform_data/i2c-omap.h> #include <linux/omap-dma.h> @@ -33,7 +31,6 @@ #include "cm2_44xx.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" -#include "i2c.h" #include "wd_timer.h" /* Base offset for all OMAP4 interrupts external to MPUSS */ @@ -1056,160 +1053,6 @@ static struct omap_hwmod omap44xx_fdif_hwmod = { }; /* - * 'gpio' class - * general purpose io module - */ - -static struct omap_hwmod_class_sysconfig omap44xx_gpio_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0114, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_gpio_hwmod_class = { - .name = "gpio", - .sysc = &omap44xx_gpio_sysc, - .rev = 2, -}; - -/* gpio1 */ -static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { - { .role = "dbclk", .clk = "gpio1_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio1_hwmod = { - .name = "gpio1", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .main_clk = "l4_wkup_clk_mux_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), -}; - -/* gpio2 */ -static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { - { .role = "dbclk", .clk = "gpio2_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio2_hwmod = { - .name = "gpio2", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), -}; - -/* gpio3 */ -static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { - { .role = "dbclk", .clk = "gpio3_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio3_hwmod = { - .name = "gpio3", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), -}; - -/* gpio4 */ -static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { - { .role = "dbclk", .clk = "gpio4_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio4_hwmod = { - .name = "gpio4", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), -}; - -/* gpio5 */ -static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { - { .role = "dbclk", .clk = "gpio5_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio5_hwmod = { - .name = "gpio5", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio5_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), -}; - -/* gpio6 */ -static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { - { .role = "dbclk", .clk = "gpio6_dbclk" }, -}; - -static struct omap_hwmod omap44xx_gpio6_hwmod = { - .name = "gpio6", - .class = &omap44xx_gpio_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio6_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), -}; - -/* * 'gpmc' class * general purpose memory controller */ @@ -1355,94 +1198,6 @@ static struct omap_hwmod omap44xx_hsi_hwmod = { }; /* - * 'i2c' class - * multimaster high-speed i2c controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0010, - .syss_offs = 0x0090, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_i2c_hwmod_class = { - .name = "i2c", - .sysc = &omap44xx_i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_2, - .reset = &omap_i2c_reset, -}; - -/* i2c1 */ -static struct omap_hwmod omap44xx_i2c1_hwmod = { - .name = "i2c1", - .class = &omap44xx_i2c_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c2 */ -static struct omap_hwmod omap44xx_i2c2_hwmod = { - .name = "i2c2", - .class = &omap44xx_i2c_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c3 */ -static struct omap_hwmod omap44xx_i2c3_hwmod = { - .name = "i2c3", - .class = &omap44xx_i2c_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c4 */ -static struct omap_hwmod omap44xx_i2c4_hwmod = { - .name = "i2c4", - .class = &omap44xx_i2c_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'ipu' class * imaging processor unit */ @@ -1819,189 +1574,6 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { }; /* - * 'mcspi' class - * multichannel serial port interface (mcspi) / master/slave synchronous serial - * bus - */ - -static struct omap_hwmod_class_sysconfig omap44xx_mcspi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_mcspi_hwmod_class = { - .name = "mcspi", - .sysc = &omap44xx_mcspi_sysc, -}; - -/* mcspi1 */ -static struct omap_hwmod omap44xx_mcspi1_hwmod = { - .name = "mcspi1", - .class = &omap44xx_mcspi_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi2 */ -static struct omap_hwmod omap44xx_mcspi2_hwmod = { - .name = "mcspi2", - .class = &omap44xx_mcspi_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi3 */ -static struct omap_hwmod omap44xx_mcspi3_hwmod = { - .name = "mcspi3", - .class = &omap44xx_mcspi_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mcspi4 */ -static struct omap_hwmod omap44xx_mcspi4_hwmod = { - .name = "mcspi4", - .class = &omap44xx_mcspi_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'mmc' class - * multimedia card high-speed/sd/sdio (mmc/sd/sdio) host controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_mmc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_mmc_hwmod_class = { - .name = "mmc", - .sysc = &omap44xx_mmc_sysc, -}; - -/* mmc1 */ -static struct omap_hsmmc_dev_attr mmc1_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -static struct omap_hwmod omap44xx_mmc1_hwmod = { - .name = "mmc1", - .class = &omap44xx_mmc_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .main_clk = "hsmmc1_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .dev_attr = &mmc1_dev_attr, -}; - -/* mmc2 */ -static struct omap_hwmod omap44xx_mmc2_hwmod = { - .name = "mmc2", - .class = &omap44xx_mmc_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .main_clk = "hsmmc2_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc3 */ -static struct omap_hwmod omap44xx_mmc3_hwmod = { - .name = "mmc3", - .class = &omap44xx_mmc_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc4 */ -static struct omap_hwmod omap44xx_mmc4_hwmod = { - .name = "mmc4", - .class = &omap44xx_mmc_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc5 */ -static struct omap_hwmod omap44xx_mmc5_hwmod = { - .name = "mmc5", - .class = &omap44xx_mmc_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'mmu' class * The memory management unit performs virtual to physical address translation * for its requestors. @@ -2367,7 +1939,6 @@ static struct omap_hwmod_class_sysconfig omap44xx_smartreflex_sysc = { static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = { .name = "smartreflex", .sysc = &omap44xx_smartreflex_sysc, - .rev = 2, }; /* smartreflex_core */ @@ -2673,92 +2244,6 @@ static struct omap_hwmod omap44xx_timer11_hwmod = { }; /* - * 'uart' class - * universal asynchronous receiver/transmitter (uart) - */ - -static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = { - .rev_offs = 0x0050, - .sysc_offs = 0x0054, - .syss_offs = 0x0058, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_uart_hwmod_class = { - .name = "uart", - .sysc = &omap44xx_uart_sysc, -}; - -/* uart1 */ -static struct omap_hwmod omap44xx_uart1_hwmod = { - .name = "uart1", - .class = &omap44xx_uart_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart2 */ -static struct omap_hwmod omap44xx_uart2_hwmod = { - .name = "uart2", - .class = &omap44xx_uart_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart3 */ -static struct omap_hwmod omap44xx_uart3_hwmod = { - .name = "uart3", - .class = &omap44xx_uart_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart4 */ -static struct omap_hwmod omap44xx_uart4_hwmod = { - .name = "uart4", - .class = &omap44xx_uart_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'usb_host_fs' class * full-speed usb host controller */ @@ -3082,22 +2567,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* mmc1 -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_mmc1__l3_main_1 = { - .master = &omap44xx_mmc1_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mmc2 -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_mmc2__l3_main_1 = { - .master = &omap44xx_mmc2_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* mpu -> l3_main_1 */ static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { .master = &omap44xx_mpu_hwmod, @@ -3554,54 +3023,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__fdif = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> gpio1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_gpio1_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio5 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio5_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio6 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio6_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_2 -> gpmc */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = { .master = &omap44xx_l3_main_2_hwmod, @@ -3634,38 +3055,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> i2c1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_2 -> ipu */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = { .master = &omap44xx_l3_main_2_hwmod, @@ -3770,78 +3159,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> mcspi1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mcspi4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc5 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc5 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc5_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_2 -> ocmc_ram */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = { .master = &omap44xx_l3_main_2_hwmod, @@ -4050,38 +3367,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> uart1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart4_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> usb_host_fs */ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = { .master = &omap44xx_l4_cfg_hwmod, @@ -4164,8 +3449,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_dss__l3_main_1, &omap44xx_l3_main_2__l3_main_1, &omap44xx_l4_cfg__l3_main_1, - &omap44xx_mmc1__l3_main_1, - &omap44xx_mmc2__l3_main_1, &omap44xx_mpu__l3_main_1, &omap44xx_debugss__l3_main_2, &omap44xx_dma_system__l3_main_2, @@ -4222,20 +3505,10 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__dss_venc, &omap44xx_l4_per__elm, &omap44xx_l4_cfg__fdif, - &omap44xx_l4_wkup__gpio1, - &omap44xx_l4_per__gpio2, - &omap44xx_l4_per__gpio3, - &omap44xx_l4_per__gpio4, - &omap44xx_l4_per__gpio5, - &omap44xx_l4_per__gpio6, &omap44xx_l3_main_2__gpmc, &omap44xx_l3_main_2__gpu, &omap44xx_l4_per__hdq1w, &omap44xx_l4_cfg__hsi, - &omap44xx_l4_per__i2c1, - &omap44xx_l4_per__i2c2, - &omap44xx_l4_per__i2c3, - &omap44xx_l4_per__i2c4, &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, /* &omap44xx_iva__sl2if, */ @@ -4249,15 +3522,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__mcbsp3, &omap44xx_l4_per__mcbsp4, &omap44xx_l4_abe__mcpdm, - &omap44xx_l4_per__mcspi1, - &omap44xx_l4_per__mcspi2, - &omap44xx_l4_per__mcspi3, - &omap44xx_l4_per__mcspi4, - &omap44xx_l4_per__mmc1, - &omap44xx_l4_per__mmc2, - &omap44xx_l4_per__mmc3, - &omap44xx_l4_per__mmc4, - &omap44xx_l4_per__mmc5, &omap44xx_l3_main_2__mmu_ipu, &omap44xx_l4_cfg__mmu_dsp, &omap44xx_l3_main_2__ocmc_ram, @@ -4286,10 +3550,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__timer9, &omap44xx_l4_per__timer10, &omap44xx_l4_per__timer11, - &omap44xx_l4_per__uart1, - &omap44xx_l4_per__uart2, - &omap44xx_l4_per__uart3, - &omap44xx_l4_per__uart4, /* &omap44xx_l4_cfg__usb_host_fs, */ &omap44xx_l4_cfg__usb_host_hs, &omap44xx_l4_cfg__usb_otg_hs, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 115473d441cd..29805cc9d74c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -18,9 +18,7 @@ */ #include <linux/io.h> -#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> -#include <linux/platform_data/i2c-omap.h> #include <linux/omap-dma.h> @@ -29,7 +27,6 @@ #include "cm1_54xx.h" #include "cm2_54xx.h" #include "prm54xx.h" -#include "i2c.h" #include "wd_timer.h" /* Base offset for all OMAP5 interrupts external to MPUSS */ @@ -601,308 +598,6 @@ static struct omap_hwmod omap54xx_emif2_hwmod = { }; /* - * 'gpio' class - * general purpose io module - */ - -static struct omap_hwmod_class_sysconfig omap54xx_gpio_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0114, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_gpio_hwmod_class = { - .name = "gpio", - .sysc = &omap54xx_gpio_sysc, - .rev = 2, -}; - -/* gpio1 */ -static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { - { .role = "dbclk", .clk = "gpio1_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio1_hwmod = { - .name = "gpio1", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .main_clk = "wkupaon_iclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), -}; - -/* gpio2 */ -static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { - { .role = "dbclk", .clk = "gpio2_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio2_hwmod = { - .name = "gpio2", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), -}; - -/* gpio3 */ -static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { - { .role = "dbclk", .clk = "gpio3_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio3_hwmod = { - .name = "gpio3", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), -}; - -/* gpio4 */ -static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { - { .role = "dbclk", .clk = "gpio4_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio4_hwmod = { - .name = "gpio4", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), -}; - -/* gpio5 */ -static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { - { .role = "dbclk", .clk = "gpio5_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio5_hwmod = { - .name = "gpio5", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio5_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), -}; - -/* gpio6 */ -static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { - { .role = "dbclk", .clk = "gpio6_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio6_hwmod = { - .name = "gpio6", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO6_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio6_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), -}; - -/* gpio7 */ -static struct omap_hwmod_opt_clk gpio7_opt_clks[] = { - { .role = "dbclk", .clk = "gpio7_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio7_hwmod = { - .name = "gpio7", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO7_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio7_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio7_opt_clks), -}; - -/* gpio8 */ -static struct omap_hwmod_opt_clk gpio8_opt_clks[] = { - { .role = "dbclk", .clk = "gpio8_dbclk" }, -}; - -static struct omap_hwmod omap54xx_gpio8_hwmod = { - .name = "gpio8", - .class = &omap54xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_GPIO8_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio8_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio8_opt_clks), -}; - -/* - * 'i2c' class - * multimaster high-speed i2c controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_i2c_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0010, - .syss_offs = 0x0090, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_i2c_hwmod_class = { - .name = "i2c", - .sysc = &omap54xx_i2c_sysc, - .reset = &omap_i2c_reset, - .rev = OMAP_I2C_IP_VERSION_2, -}; - -/* i2c1 */ -static struct omap_hwmod omap54xx_i2c1_hwmod = { - .name = "i2c1", - .class = &omap54xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_I2C1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_I2C1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c2 */ -static struct omap_hwmod omap54xx_i2c2_hwmod = { - .name = "i2c2", - .class = &omap54xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_I2C2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_I2C2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c3 */ -static struct omap_hwmod omap54xx_i2c3_hwmod = { - .name = "i2c3", - .class = &omap54xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_I2C3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_I2C3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c4 */ -static struct omap_hwmod omap54xx_i2c4_hwmod = { - .name = "i2c4", - .class = &omap54xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_I2C4_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_I2C4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c5 */ -static struct omap_hwmod omap54xx_i2c5_hwmod = { - .name = "i2c5", - .class = &omap54xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_I2C5_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_I2C5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'kbd' class * keyboard controller */ @@ -1185,115 +880,6 @@ static struct omap_hwmod omap54xx_mcspi4_hwmod = { }; /* - * 'mmc' class - * multimedia card high-speed/sd/sdio (mmc/sd/sdio) host controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_mmc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_mmc_hwmod_class = { - .name = "mmc", - .sysc = &omap54xx_mmc_sysc, -}; - -/* mmc1 */ -static struct omap_hwmod_opt_clk mmc1_opt_clks[] = { - { .role = "32khz_clk", .clk = "mmc1_32khz_clk" }, -}; - -/* mmc1 dev_attr */ -static struct omap_hsmmc_dev_attr mmc1_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -static struct omap_hwmod omap54xx_mmc1_hwmod = { - .name = "mmc1", - .class = &omap54xx_mmc_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "mmc1_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INIT_MMC1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mmc1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mmc1_opt_clks), - .dev_attr = &mmc1_dev_attr, -}; - -/* mmc2 */ -static struct omap_hwmod omap54xx_mmc2_hwmod = { - .name = "mmc2", - .class = &omap54xx_mmc_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "mmc2_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INIT_MMC2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc3 */ -static struct omap_hwmod omap54xx_mmc3_hwmod = { - .name = "mmc3", - .class = &omap54xx_mmc_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MMC3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MMC3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc4 */ -static struct omap_hwmod omap54xx_mmc4_hwmod = { - .name = "mmc4", - .class = &omap54xx_mmc_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MMC4_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MMC4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* mmc5 */ -static struct omap_hwmod omap54xx_mmc5_hwmod = { - .name = "mmc5", - .class = &omap54xx_mmc_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_MMC5_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_MMC5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'mmu' class * The memory management unit performs virtual to physical address translation * for its requestors. @@ -1658,124 +1244,6 @@ static struct omap_hwmod omap54xx_timer11_hwmod = { }; /* - * 'uart' class - * universal asynchronous receiver/transmitter (uart) - */ - -static struct omap_hwmod_class_sysconfig omap54xx_uart_sysc = { - .rev_offs = 0x0050, - .sysc_offs = 0x0054, - .syss_offs = 0x0058, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_uart_hwmod_class = { - .name = "uart", - .sysc = &omap54xx_uart_sysc, -}; - -/* uart1 */ -static struct omap_hwmod omap54xx_uart1_hwmod = { - .name = "uart1", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart2 */ -static struct omap_hwmod omap54xx_uart2_hwmod = { - .name = "uart2", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart3 */ -static struct omap_hwmod omap54xx_uart3_hwmod = { - .name = "uart3", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart4 */ -static struct omap_hwmod omap54xx_uart4_hwmod = { - .name = "uart4", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART4_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart5 */ -static struct omap_hwmod omap54xx_uart5_hwmod = { - .name = "uart5", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART5_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart6 */ -static struct omap_hwmod omap54xx_uart6_hwmod = { - .name = "uart6", - .class = &omap54xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .main_clk = "func_48m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_UART6_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_UART6_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'usb_host_hs' class * high-speed multi-port usb host controller */ @@ -2274,110 +1742,6 @@ static struct omap_hwmod_ocp_if omap54xx_mpu__emif2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> gpio1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_wkup__gpio1 = { - .master = &omap54xx_l4_wkup_hwmod, - .slave = &omap54xx_gpio1_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio2 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio3 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio3_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio4 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio4 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio4_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio5 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio5 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio5_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio6 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio6 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio6_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio7 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio7 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio7_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio8 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__gpio8 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_gpio8_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c1 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_i2c1_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c2 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_i2c2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c3 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_i2c3_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c4 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c4 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_i2c4_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> i2c5 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__i2c5 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_i2c5_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_wkup -> kbd */ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__kbd = { .master = &omap54xx_l4_wkup_hwmod, @@ -2458,46 +1822,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_per__mcspi4 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> mmc1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc1 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mmc1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc2 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mmc2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc3 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mmc3_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc4 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc4 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mmc4_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> mmc5 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__mmc5 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_mmc5_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> mpu */ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { .master = &omap54xx_l4_cfg_hwmod, @@ -2610,54 +1934,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_per__timer11 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per -> uart1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart1 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart1_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart2 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart3 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart3_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart4 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart4 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart4_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart5 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart5 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart5_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> uart6 */ -static struct omap_hwmod_ocp_if omap54xx_l4_per__uart6 = { - .master = &omap54xx_l4_per_hwmod, - .slave = &omap54xx_uart6_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> usb_host_hs */ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = { .master = &omap54xx_l4_cfg_hwmod, @@ -2719,19 +1995,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_2__dss_rfbi, &omap54xx_mpu__emif1, &omap54xx_mpu__emif2, - &omap54xx_l4_wkup__gpio1, - &omap54xx_l4_per__gpio2, - &omap54xx_l4_per__gpio3, - &omap54xx_l4_per__gpio4, - &omap54xx_l4_per__gpio5, - &omap54xx_l4_per__gpio6, - &omap54xx_l4_per__gpio7, - &omap54xx_l4_per__gpio8, - &omap54xx_l4_per__i2c1, - &omap54xx_l4_per__i2c2, - &omap54xx_l4_per__i2c3, - &omap54xx_l4_per__i2c4, - &omap54xx_l4_per__i2c5, &omap54xx_l3_main_2__mmu_ipu, &omap54xx_l4_wkup__kbd, &omap54xx_l4_cfg__mailbox, @@ -2743,11 +2006,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_per__mcspi2, &omap54xx_l4_per__mcspi3, &omap54xx_l4_per__mcspi4, - &omap54xx_l4_per__mmc1, - &omap54xx_l4_per__mmc2, - &omap54xx_l4_per__mmc3, - &omap54xx_l4_per__mmc4, - &omap54xx_l4_per__mmc5, &omap54xx_l4_cfg__mpu, &omap54xx_l4_cfg__spinlock, &omap54xx_l4_cfg__ocp2scp1, @@ -2762,12 +2020,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_per__timer9, &omap54xx_l4_per__timer10, &omap54xx_l4_per__timer11, - &omap54xx_l4_per__uart1, - &omap54xx_l4_per__uart2, - &omap54xx_l4_per__uart3, - &omap54xx_l4_per__uart4, - &omap54xx_l4_per__uart5, - &omap54xx_l4_per__uart6, &omap54xx_l4_cfg__usb_host_hs, &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__usb_otg_ss, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index e6c7061a8e73..7e85bd27ce9a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -18,9 +18,7 @@ */ #include <linux/io.h> -#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> -#include <linux/platform_data/i2c-omap.h> #include <linux/omap-dma.h> @@ -29,7 +27,6 @@ #include "cm1_7xx.h" #include "cm2_7xx.h" #include "prm7xx.h" -#include "i2c.h" #include "wd_timer.h" #include "soc.h" @@ -693,7 +690,6 @@ static struct omap_hwmod_class_sysconfig dra7xx_aes_sysc = { static struct omap_hwmod_class dra7xx_aes_hwmod_class = { .name = "aes", .sysc = &dra7xx_aes_sysc, - .rev = 2, }; /* AES1 */ @@ -737,7 +733,6 @@ static struct omap_hwmod_class_sysconfig dra7xx_sha0_sysc = { static struct omap_hwmod_class dra7xx_sha0_hwmod_class = { .name = "sham", .sysc = &dra7xx_sha0_sysc, - .rev = 2, }; struct omap_hwmod dra7xx_sha0_hwmod = { @@ -792,205 +787,6 @@ static struct omap_hwmod dra7xx_elm_hwmod = { }; /* - * 'gpio' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_gpio_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0114, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_gpio_hwmod_class = { - .name = "gpio", - .sysc = &dra7xx_gpio_sysc, - .rev = 2, -}; - -/* gpio1 */ -static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { - { .role = "dbclk", .clk = "gpio1_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio1_hwmod = { - .name = "gpio1", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "wkupaon_iclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), -}; - -/* gpio2 */ -static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { - { .role = "dbclk", .clk = "gpio2_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio2_hwmod = { - .name = "gpio2", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), -}; - -/* gpio3 */ -static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { - { .role = "dbclk", .clk = "gpio3_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio3_hwmod = { - .name = "gpio3", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), -}; - -/* gpio4 */ -static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { - { .role = "dbclk", .clk = "gpio4_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio4_hwmod = { - .name = "gpio4", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), -}; - -/* gpio5 */ -static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { - { .role = "dbclk", .clk = "gpio5_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio5_hwmod = { - .name = "gpio5", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio5_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), -}; - -/* gpio6 */ -static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { - { .role = "dbclk", .clk = "gpio6_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio6_hwmod = { - .name = "gpio6", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO6_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio6_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), -}; - -/* gpio7 */ -static struct omap_hwmod_opt_clk gpio7_opt_clks[] = { - { .role = "dbclk", .clk = "gpio7_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio7_hwmod = { - .name = "gpio7", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO7_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio7_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio7_opt_clks), -}; - -/* gpio8 */ -static struct omap_hwmod_opt_clk gpio8_opt_clks[] = { - { .role = "dbclk", .clk = "gpio8_dbclk" }, -}; - -static struct omap_hwmod dra7xx_gpio8_hwmod = { - .name = "gpio8", - .class = &dra7xx_gpio_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_GPIO8_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = gpio8_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(gpio8_opt_clks), -}; - -/* * 'gpmc' class * */ @@ -1065,110 +861,6 @@ static struct omap_hwmod dra7xx_hdq1w_hwmod = { }; /* - * 'i2c' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_i2c_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0010, - .syss_offs = 0x0090, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_i2c_hwmod_class = { - .name = "i2c", - .sysc = &dra7xx_i2c_sysc, - .reset = &omap_i2c_reset, - .rev = OMAP_I2C_IP_VERSION_2, -}; - -/* i2c1 */ -static struct omap_hwmod dra7xx_i2c1_hwmod = { - .name = "i2c1", - .class = &dra7xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_I2C1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_I2C1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c2 */ -static struct omap_hwmod dra7xx_i2c2_hwmod = { - .name = "i2c2", - .class = &dra7xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_I2C2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_I2C2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c3 */ -static struct omap_hwmod dra7xx_i2c3_hwmod = { - .name = "i2c3", - .class = &dra7xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_I2C3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_I2C3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c4 */ -static struct omap_hwmod dra7xx_i2c4_hwmod = { - .name = "i2c4", - .class = &dra7xx_i2c_hwmod_class, - .clkdm_name = "l4per_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_I2C4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_I2C4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* i2c5 */ -static struct omap_hwmod dra7xx_i2c5_hwmod = { - .name = "i2c5", - .class = &dra7xx_i2c_hwmod_class, - .clkdm_name = "ipu_clkdm", - .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, - .main_clk = "func_96m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_IPU_I2C5_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_IPU_I2C5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* * 'mailbox' class * */ @@ -1632,118 +1324,6 @@ static struct omap_hwmod dra7xx_mcasp8_hwmod = { }; /* - * 'mmc' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_mmc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_mmc_hwmod_class = { - .name = "mmc", - .sysc = &dra7xx_mmc_sysc, -}; - -/* mmc1 */ -static struct omap_hwmod_opt_clk mmc1_opt_clks[] = { - { .role = "clk32k", .clk = "mmc1_clk32k" }, -}; - -/* mmc1 dev_attr */ -static struct omap_hsmmc_dev_attr mmc1_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, -}; - -static struct omap_hwmod dra7xx_mmc1_hwmod = { - .name = "mmc1", - .class = &dra7xx_mmc_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "mmc1_fclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mmc1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mmc1_opt_clks), - .dev_attr = &mmc1_dev_attr, -}; - -/* mmc2 */ -static struct omap_hwmod_opt_clk mmc2_opt_clks[] = { - { .role = "clk32k", .clk = "mmc2_clk32k" }, -}; - -static struct omap_hwmod dra7xx_mmc2_hwmod = { - .name = "mmc2", - .class = &dra7xx_mmc_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "mmc2_fclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_MMC2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mmc2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mmc2_opt_clks), -}; - -/* mmc3 */ -static struct omap_hwmod_opt_clk mmc3_opt_clks[] = { - { .role = "clk32k", .clk = "mmc3_clk32k" }, -}; - -static struct omap_hwmod dra7xx_mmc3_hwmod = { - .name = "mmc3", - .class = &dra7xx_mmc_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "mmc3_gfclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_MMC3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_MMC3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mmc3_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mmc3_opt_clks), -}; - -/* mmc4 */ -static struct omap_hwmod_opt_clk mmc4_opt_clks[] = { - { .role = "clk32k", .clk = "mmc4_clk32k" }, -}; - -static struct omap_hwmod dra7xx_mmc4_hwmod = { - .name = "mmc4", - .class = &dra7xx_mmc_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "mmc4_gfclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_MMC4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_MMC4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = mmc4_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(mmc4_opt_clks), -}; - -/* * 'mpu' class * */ @@ -1832,7 +1412,7 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = { * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset * lines after asserting them. */ -static int dra7xx_pciess_reset(struct omap_hwmod *oh) +int dra7xx_pciess_reset(struct omap_hwmod *oh) { int i; @@ -2019,7 +1599,6 @@ static struct omap_hwmod_class_sysconfig dra7xx_smartreflex_sysc = { static struct omap_hwmod_class dra7xx_smartreflex_hwmod_class = { .name = "smartreflex", .sysc = &dra7xx_smartreflex_sysc, - .rev = 2, }; /* smartreflex_core */ @@ -2375,188 +1954,6 @@ static struct omap_hwmod dra7xx_timer16_hwmod = { }, }; -/* - * 'uart' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_uart_sysc = { - .rev_offs = 0x0050, - .sysc_offs = 0x0054, - .syss_offs = 0x0058, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_uart_hwmod_class = { - .name = "uart", - .sysc = &dra7xx_uart_sysc, -}; - -/* uart1 */ -static struct omap_hwmod dra7xx_uart1_hwmod = { - .name = "uart1", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "uart1_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP2UART1_FLAGS, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_UART1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_UART1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart2 */ -static struct omap_hwmod dra7xx_uart2_hwmod = { - .name = "uart2", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "uart2_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_UART2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_UART2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart3 */ -static struct omap_hwmod dra7xx_uart3_hwmod = { - .name = "uart3", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "uart3_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART3_FLAGS, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_UART3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart4 */ -static struct omap_hwmod dra7xx_uart4_hwmod = { - .name = "uart4", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "uart4_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART4_FLAGS, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_UART4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart5 */ -static struct omap_hwmod dra7xx_uart5_hwmod = { - .name = "uart5", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per_clkdm", - .main_clk = "uart5_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_UART5_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER_UART5_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart6 */ -static struct omap_hwmod dra7xx_uart6_hwmod = { - .name = "uart6", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "ipu_clkdm", - .main_clk = "uart6_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_IPU_UART6_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_IPU_UART6_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart7 */ -static struct omap_hwmod dra7xx_uart7_hwmod = { - .name = "uart7", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per2_clkdm", - .main_clk = "uart7_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER2_UART7_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER2_UART7_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart8 */ -static struct omap_hwmod dra7xx_uart8_hwmod = { - .name = "uart8", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per2_clkdm", - .main_clk = "uart8_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER2_UART8_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER2_UART8_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart9 */ -static struct omap_hwmod dra7xx_uart9_hwmod = { - .name = "uart9", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "l4per2_clkdm", - .main_clk = "uart9_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER2_UART9_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER2_UART9_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* uart10 */ -static struct omap_hwmod dra7xx_uart10_hwmod = { - .name = "uart10", - .class = &dra7xx_uart_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .main_clk = "uart10_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_WKUPAON_UART10_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_WKUPAON_UART10_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* DES (the 'P' (public) device) */ static struct omap_hwmod_class_sysconfig dra7xx_des_sysc = { .rev_offs = 0x0030, @@ -3113,70 +2510,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_wkup -> gpio1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_wkup__gpio1 = { - .master = &dra7xx_l4_wkup_hwmod, - .slave = &dra7xx_gpio1_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio2 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio3 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio4 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio4_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio5 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio5 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio5_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio6 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio6 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio6_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio7 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio7 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio7_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> gpio8 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio8 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_gpio8_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> gpmc */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = { .master = &dra7xx_l3_main_1_hwmod, @@ -3193,46 +2526,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__hdq1w = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per1 -> i2c1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c1 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_i2c1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> i2c2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c2 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_i2c2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> i2c3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c3 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_i2c3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> i2c4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c4 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_i2c4_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> i2c5 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_i2c5_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> mailbox1 */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mailbox1 = { .master = &dra7xx_l4_cfg_hwmod, @@ -3369,38 +2662,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi4 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per1 -> mmc1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc1 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_mmc1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> mmc2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc2 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_mmc2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> mmc3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc3 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_mmc3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> mmc4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc4 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_mmc4_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_cfg -> mpu */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = { .master = &dra7xx_l4_cfg_hwmod, @@ -3633,62 +2894,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer16 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per1 -> uart1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart1 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> uart2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart2 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> uart3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart3 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> uart4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart4 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart4_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> uart5 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart5 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart5_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per1 -> uart6 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart6 = { - .master = &dra7xx_l4_per1_hwmod, - .slave = &dra7xx_uart6_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per2 -> uart7 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart7 = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_uart7_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_per1 -> des */ static struct omap_hwmod_ocp_if dra7xx_l4_per1__des = { .master = &dra7xx_l4_per1_hwmod, @@ -3697,30 +2902,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__des = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per2 -> uart8 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart8 = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_uart8_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per2 -> uart9 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart9 = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_uart9_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> uart10 */ -static struct omap_hwmod_ocp_if dra7xx_l4_wkup__uart10 = { - .master = &dra7xx_l4_wkup_hwmod, - .slave = &dra7xx_uart10_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l4_per1 -> rng */ static struct omap_hwmod_ocp_if dra7xx_l4_per1__rng = { .master = &dra7xx_l4_per1_hwmod, @@ -3866,21 +3047,8 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__aes2, &dra7xx_l3_main_1__sha0, &dra7xx_l4_per1__elm, - &dra7xx_l4_wkup__gpio1, - &dra7xx_l4_per1__gpio2, - &dra7xx_l4_per1__gpio3, - &dra7xx_l4_per1__gpio4, - &dra7xx_l4_per1__gpio5, - &dra7xx_l4_per1__gpio6, - &dra7xx_l4_per1__gpio7, - &dra7xx_l4_per1__gpio8, &dra7xx_l3_main_1__gpmc, &dra7xx_l4_per1__hdq1w, - &dra7xx_l4_per1__i2c1, - &dra7xx_l4_per1__i2c2, - &dra7xx_l4_per1__i2c3, - &dra7xx_l4_per1__i2c4, - &dra7xx_l4_per1__i2c5, &dra7xx_l4_cfg__mailbox1, &dra7xx_l4_per3__mailbox2, &dra7xx_l4_per3__mailbox3, @@ -3898,10 +3066,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per1__mcspi2, &dra7xx_l4_per1__mcspi3, &dra7xx_l4_per1__mcspi4, - &dra7xx_l4_per1__mmc1, - &dra7xx_l4_per1__mmc2, - &dra7xx_l4_per1__mmc3, - &dra7xx_l4_per1__mmc4, &dra7xx_l4_cfg__mpu, &dra7xx_l4_cfg__ocp2scp1, &dra7xx_l4_cfg__ocp2scp3, @@ -3929,16 +3093,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per3__timer14, &dra7xx_l4_per3__timer15, &dra7xx_l4_per3__timer16, - &dra7xx_l4_per1__uart1, - &dra7xx_l4_per1__uart2, - &dra7xx_l4_per1__uart3, - &dra7xx_l4_per1__uart4, - &dra7xx_l4_per1__uart5, - &dra7xx_l4_per1__uart6, - &dra7xx_l4_per2__uart7, - &dra7xx_l4_per2__uart8, - &dra7xx_l4_per2__uart9, - &dra7xx_l4_wkup__uart10, &dra7xx_l4_per1__des, &dra7xx_l4_per3__usb_otg_ss1, &dra7xx_l4_per3__usb_otg_ss2, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index debcd88ab971..83230d9ce5ed 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -484,7 +484,6 @@ static struct omap_hwmod_class_sysconfig dm81xx_gpio_sysc = { static struct omap_hwmod_class dm81xx_gpio_hwmod_class = { .name = "gpio", .sysc = &dm81xx_gpio_sysc, - .rev = 2, }; static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c index 724cf5774a6c..f11442ed3eff 100644 --- a/arch/arm/mach-omap2/pm33xx-core.c +++ b/arch/arm/mach-omap2/pm33xx-core.c @@ -10,6 +10,12 @@ #include <asm/suspend.h> #include <linux/errno.h> #include <linux/platform_data/pm33xx.h> +#include <linux/clk.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/wkup_m3_ipc.h> +#include <linux/of.h> +#include <linux/rtc.h> #include "cm33xx.h" #include "common.h" @@ -38,6 +44,29 @@ static int am43xx_map_scu(void) return 0; } +static int am33xx_check_off_mode_enable(void) +{ + if (enable_off_mode) + pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n"); + + /* off mode not supported on am335x so return 0 always */ + return 0; +} + +static int am43xx_check_off_mode_enable(void) +{ + /* + * Check for am437x-gp-evm which has the right Hardware design to + * support this mode reliably. + */ + if (of_machine_is_compatible("ti,am437x-gp-evm") && enable_off_mode) + return enable_off_mode; + else if (enable_off_mode) + pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n"); + + return 0; +} + static int amx3_common_init(void) { gfx_pwrdm = pwrdm_lookup("gfx_pwrdm"); @@ -51,10 +80,12 @@ static int amx3_common_init(void) /* CEFUSE domain can be turned off post bootup */ cefuse_pwrdm = pwrdm_lookup("cefuse_pwrdm"); - if (cefuse_pwrdm) - omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF); - else + if (!cefuse_pwrdm) pr_err("PM: Failed to get cefuse_pwrdm\n"); + else if (omap_type() != OMAP2_DEVICE_TYPE_GP) + pr_info("PM: Leaving EFUSE power domain active\n"); + else + omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF); return 0; } @@ -139,7 +170,9 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long), scu_power_mode(scu_base, SCU_PM_POWEROFF); ret = cpu_suspend(args, fn); scu_power_mode(scu_base, SCU_PM_NORMAL); - amx3_post_suspend_common(); + + if (!am43xx_check_off_mode_enable()) + amx3_post_suspend_common(); return ret; } @@ -161,10 +194,48 @@ void __iomem *am43xx_get_rtc_base_addr(void) return omap_hwmod_get_mpu_rt_va(rtc_oh); } +static void am43xx_save_context(void) +{ +} + +static void am33xx_save_context(void) +{ + omap_intc_save_context(); +} + +static void am33xx_restore_context(void) +{ + omap_intc_restore_context(); +} + +static void am43xx_restore_context(void) +{ + /* + * HACK: restore dpll_per_clkdcoldo register contents, to avoid + * breaking suspend-resume + */ + writel_relaxed(0x0, AM33XX_L4_WK_IO_ADDRESS(0x44df2e14)); +} + +static void am43xx_prepare_rtc_suspend(void) +{ + omap_hwmod_enable(rtc_oh); +} + +static void am43xx_prepare_rtc_resume(void) +{ + omap_hwmod_idle(rtc_oh); +} + static struct am33xx_pm_platform_data am33xx_ops = { .init = am33xx_suspend_init, .soc_suspend = am33xx_suspend, .get_sram_addrs = amx3_get_sram_addrs, + .save_context = am33xx_save_context, + .restore_context = am33xx_restore_context, + .prepare_rtc_suspend = am43xx_prepare_rtc_suspend, + .prepare_rtc_resume = am43xx_prepare_rtc_resume, + .check_off_mode_enable = am33xx_check_off_mode_enable, .get_rtc_base_addr = am43xx_get_rtc_base_addr, }; @@ -172,6 +243,11 @@ static struct am33xx_pm_platform_data am43xx_ops = { .init = am43xx_suspend_init, .soc_suspend = am43xx_suspend, .get_sram_addrs = amx3_get_sram_addrs, + .save_context = am43xx_save_context, + .restore_context = am43xx_restore_context, + .prepare_rtc_suspend = am43xx_prepare_rtc_suspend, + .prepare_rtc_resume = am43xx_prepare_rtc_resume, + .check_off_mode_enable = am43xx_check_off_mode_enable, .get_rtc_base_addr = am43xx_get_rtc_base_addr, }; diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S index 5b9343b58fc7..0c1031442571 100644 --- a/arch/arm/mach-omap2/sleep43xx.S +++ b/arch/arm/mach-omap2/sleep43xx.S @@ -368,6 +368,9 @@ wait_emif_enable1: mov r1, #AM43XX_EMIF_POWEROFF_DISABLE str r1, [r2, #0x0] + ldr r1, [r9, #EMIF_PM_RUN_HW_LEVELING] + blx r1 + #ifdef CONFIG_CACHE_L2X0 ldr r2, l2_cache_base ldr r0, [r2, #L2X0_CTRL] diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 0854ed9ff379..248f6d9a1bb3 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -119,7 +119,10 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) } sr_data->name = oh->name; - sr_data->ip_type = oh->class->rev; + if (cpu_is_omap343x()) + sr_data->ip_type = 1; + else + sr_data->ip_type = 2; sr_data->senn_mod = 0x1; sr_data->senp_mod = 0x1; diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 51984a40b097..4675d9202000 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -245,6 +245,7 @@ static int __init rockchip_smp_prepare_pmu(void) } pmu_base = of_iomap(node, 0); + of_node_put(node); if (!pmu_base) { pr_err("%s: could not map pmu registers\n", __func__); return -ENOMEM; diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c index 0592534e0b88..065b09e6f1eb 100644 --- a/arch/arm/mach-rockchip/pm.c +++ b/arch/arm/mach-rockchip/pm.c @@ -59,7 +59,7 @@ static inline u32 rk3288_l2_config(void) return l2ctlr; } -static void rk3288_config_bootdata(void) +static void __init rk3288_config_bootdata(void) { rkpm_bootdata_cpusp = rk3288_bootram_phy + (SZ_4K - 8); rkpm_bootdata_cpu_code = __pa_symbol(cpu_resume); @@ -230,7 +230,7 @@ static void rk3288_suspend_finish(void) pr_err("%s: Suspend finish failed\n", __func__); } -static int rk3288_suspend_init(struct device_node *np) +static int __init rk3288_suspend_init(struct device_node *np) { struct device_node *sram_np; struct resource res; diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 76c4855a03bc..937d0a83f8fd 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -328,6 +328,8 @@ static const struct { int num_i2c_devs; const struct spi_board_info *spi_devs; int num_spi_devs; + + struct gpiod_lookup_table *gpiod_table; } gf_mods[] = { { .id = 0x01, .rev = 0xff, .name = "1250-EV1 Springbank" }, { .id = 0x02, .rev = 0xff, .name = "1251-EV1 Jura" }, @@ -362,13 +364,16 @@ static const struct { .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) }, { .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" }, { .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill", - .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) }, + .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs), + .gpiod_table = &wm8994_gpiod_table }, { .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut", .spi_devs = wm5102_reva_spi_devs, - .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs) }, + .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs), + .gpiod_table = &wm5102_reva_gpiod_table }, { .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut", .spi_devs = wm5102_spi_devs, - .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) }, + .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs), + .gpiod_table = &wm5102_gpiod_table }, { .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1", .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) }, }; @@ -408,6 +413,9 @@ static int wlf_gf_module_probe(struct i2c_client *i2c, spi_register_board_info(gf_mods[i].spi_devs, gf_mods[i].num_spi_devs); + + if (gf_mods[i].gpiod_table) + gpiod_add_lookup_table(gf_mods[i].gpiod_table); } else { dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n", id, rev + 1); diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c index 8c2a20591524..e84599dd96f1 100644 --- a/arch/arm/mach-shmobile/pm-rcar-gen2.c +++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c @@ -72,6 +72,7 @@ void __init rcar_gen2_pm_init(void) } error = of_address_to_resource(np, 0, &res); + of_node_put(np); if (error) { pr_err("Failed to get smp-sram address: %d\n", error); return; diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c index dc526ef2e9b3..ee949255ced3 100644 --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * R-Car Generation 2 da9063/da9210 regulator quirk + * R-Car Generation 2 da9063(L)/da9210 regulator quirk * * Certain Gen2 development boards have an da9063 and one or more da9210 * regulators. All of these regulators have their interrupt request lines @@ -65,6 +65,7 @@ static struct i2c_msg da9210_msg = { static const struct of_device_id rcar_gen2_quirk_match[] = { { .compatible = "dlg,da9063", .data = &da9063_msg }, + { .compatible = "dlg,da9063l", .data = &da9063_msg }, { .compatible = "dlg,da9210", .data = &da9210_msg }, {}, }; @@ -147,6 +148,7 @@ static int __init rcar_gen2_regulator_quirk(void) if (!of_machine_is_compatible("renesas,koelsch") && !of_machine_is_compatible("renesas,lager") && + !of_machine_is_compatible("renesas,porter") && !of_machine_is_compatible("renesas,stout") && !of_machine_is_compatible("renesas,gose")) return -ENODEV; @@ -210,7 +212,7 @@ static int __init rcar_gen2_regulator_quirk(void) goto err_free; } - pr_info("IRQ2 is asserted, installing da9063/da9210 regulator quirk\n"); + pr_info("IRQ2 is asserted, installing regulator quirk\n"); bus_register_notifier(&i2c_bus_type, ®ulator_quirk_nb); return 0; diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig index 713c068b953f..651bdf4f9c9e 100644 --- a/arch/arm/mach-stm32/Kconfig +++ b/arch/arm/mach-stm32/Kconfig @@ -4,6 +4,7 @@ menuconfig ARCH_STM32 select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 select ARM_GIC if ARCH_MULTI_V7 select ARM_PSCI if ARCH_MULTI_V7 + select ARM_AMBA select ARCH_HAS_RESET_CONTROLLER select CLKSRC_STM32 select PINCTRL @@ -18,22 +19,18 @@ if ARM_SINGLE_ARMV7M config MACH_STM32F429 bool "STMicroelectronics STM32F429" - select ARM_AMBA default y config MACH_STM32F469 bool "STMicroelectronics STM32F469" - select ARM_AMBA default y config MACH_STM32F746 bool "STMicroelectronics STM32F746" - select ARM_AMBA default y config MACH_STM32F769 bool "STMicroelectronics STM32F769" - select ARM_AMBA default y config MACH_STM32H743 diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c index b4037b603897..239084cf8192 100644 --- a/arch/arm/mach-sunxi/mc_smp.c +++ b/arch/arm/mach-sunxi/mc_smp.c @@ -89,6 +89,7 @@ static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster) { struct device_node *node; int cpu = cluster * SUNXI_CPUS_PER_CLUSTER + core; + bool is_compatible; node = of_cpu_device_node_get(cpu); @@ -107,7 +108,9 @@ static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster) return false; } - return of_device_is_compatible(node, "arm,cortex-a15"); + is_compatible = of_device_is_compatible(node, "arm,cortex-a15"); + of_node_put(node); + return is_compatible; } static int sunxi_cpu_power_switch_set(unsigned int cpu, unsigned int cluster, diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index 8fb5088464db..bdde9ef3aaa9 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -50,6 +50,7 @@ static void __init sun6i_smp_prepare_cpus(unsigned int max_cpus) } prcm_membase = of_iomap(node, 0); + of_node_put(node); if (!prcm_membase) { pr_err("Couldn't map A31 PRCM registers\n"); return; @@ -63,6 +64,7 @@ static void __init sun6i_smp_prepare_cpus(unsigned int max_cpus) } cpucfg_membase = of_iomap(node, 0); + of_node_put(node); if (!cpucfg_membase) pr_err("Couldn't map A31 CPU config registers\n"); @@ -133,6 +135,7 @@ static void __init sun8i_smp_prepare_cpus(unsigned int max_cpus) } prcm_membase = of_iomap(node, 0); + of_node_put(node); if (!prcm_membase) { pr_err("Couldn't map A23 PRCM registers\n"); return; @@ -146,6 +149,7 @@ static void __init sun8i_smp_prepare_cpus(unsigned int max_cpus) } cpucfg_membase = of_iomap(node, 0); + of_node_put(node); if (!cpucfg_membase) pr_err("Couldn't map A23 CPU config registers\n"); diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 7f3b83e0d324..3a06ba263e34 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -2,7 +2,7 @@ menuconfig ARCH_TEGRA bool "NVIDIA Tegra" depends on ARCH_MULTI_V7 - select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS + select ARCH_HAS_RESET_CONTROLLER select ARM_AMBA select ARM_GIC select CLKSRC_MMIO @@ -10,8 +10,8 @@ menuconfig ARCH_TEGRA select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select PINCTRL + select PM select PM_OPP - select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER select SOC_BUS select ZONE_DMA if ARM_LPAE diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c index e3fbcfedf845..43c695d83f03 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -21,6 +21,8 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/firmware/trusted_foundations.h> + #include <asm/cpuidle.h> #include <asm/smp_plat.h> #include <asm/suspend.h> @@ -46,7 +48,7 @@ static int tegra114_idle_power_down(struct cpuidle_device *dev, tegra_set_cpu_in_lp2(); cpu_pm_enter(); - call_firmware_op(prepare_idle); + call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2); /* Do suspend by ourselves if the firmware does not implement it */ if (call_firmware_op(do_idle, 0) == -ENOSYS) diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 3f24addd7972..6620d61b5ec5 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -61,7 +61,8 @@ static struct cpuidle_driver tegra_idle_driver = { .exit_latency = 5000, .target_residency = 10000, .power_usage = 0, - .flags = CPUIDLE_FLAG_COUPLED, + .flags = CPUIDLE_FLAG_COUPLED | + CPUIDLE_FLAG_TIMER_STOP, .name = "powered-down", .desc = "CPU power gated", }, @@ -136,12 +137,8 @@ static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev, if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready()) return false; - tick_broadcast_enter(); - tegra_idle_lp2_last(); - tick_broadcast_exit(); - if (cpu_online(1)) tegra20_wake_cpu1_from_reset(); @@ -153,14 +150,10 @@ static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - tick_broadcast_enter(); - cpu_suspend(0, tegra20_sleep_cpu_secondary_finish); tegra20_cpu_clear_resettable(); - tick_broadcast_exit(); - return true; } #else diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index c1417361e10e..c8fe0447e3a9 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -56,6 +56,7 @@ static struct cpuidle_driver tegra_idle_driver = { .exit_latency = 2000, .target_residency = 2200, .power_usage = 0, + .flags = CPUIDLE_FLAG_TIMER_STOP, .name = "powered-down", .desc = "CPU power gated", }, @@ -76,12 +77,8 @@ static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev, return false; } - tick_broadcast_enter(); - tegra_idle_lp2_last(); - tick_broadcast_exit(); - return true; } @@ -90,14 +87,10 @@ static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - tick_broadcast_enter(); - smp_wmb(); cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); - tick_broadcast_exit(); - return true; } #else diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index 9bc291e76887..9e5b2f869fc8 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -79,24 +79,15 @@ #define TEGRA_PMC_BASE 0x7000E400 #define TEGRA_PMC_SIZE SZ_256 -#define TEGRA_MC_BASE 0x7000F000 -#define TEGRA_MC_SIZE SZ_1K - #define TEGRA_EMC_BASE 0x7000F400 #define TEGRA_EMC_SIZE SZ_1K -#define TEGRA114_MC_BASE 0x70019000 -#define TEGRA114_MC_SIZE SZ_4K - #define TEGRA_EMC0_BASE 0x7001A000 #define TEGRA_EMC0_SIZE SZ_2K #define TEGRA_EMC1_BASE 0x7001A800 #define TEGRA_EMC1_SIZE SZ_2K -#define TEGRA124_MC_BASE 0x70019000 -#define TEGRA124_MC_SIZE SZ_4K - #define TEGRA124_EMC_BASE 0x7001B000 #define TEGRA124_EMC_SIZE SZ_2K diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 1ad5719779b0..1b0ade06f204 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -27,12 +27,15 @@ #include <linux/spinlock.h> #include <linux/suspend.h> +#include <linux/firmware/trusted_foundations.h> + #include <soc/tegra/flowctrl.h> #include <soc/tegra/fuse.h> #include <soc/tegra/pm.h> #include <soc/tegra/pmc.h> #include <asm/cacheflush.h> +#include <asm/firmware.h> #include <asm/idmap.h> #include <asm/proc-fns.h> #include <asm/smp_plat.h> @@ -159,6 +162,28 @@ int tegra_cpu_do_idle(void) static int tegra_sleep_cpu(unsigned long v2p) { + /* + * L2 cache disabling using kernel API only allowed when all + * secondary CPU's are offline. Cache have to be disabled with + * MMU-on if cache maintenance is done via Trusted Foundations + * firmware. Note that CPUIDLE won't ever enter powergate on Tegra30 + * if any of secondary CPU's is online and this is the LP2-idle + * code-path only for Tegra20/30. + */ + if (trusted_foundations_registered()) + outer_disable(); + + /* + * Note that besides of setting up CPU reset vector this firmware + * call may also do the following, depending on the FW version: + * 1) Disable L2. But this doesn't matter since we already + * disabled the L2. + * 2) Disable D-cache. This need to be taken into account in + * particular by the tegra_disable_clean_inv_dcache() which + * shall avoid the re-disable. + */ + call_firmware_op(prepare_idle, TF_PM_MODE_LP2); + setup_mm_for_reboot(); tegra_sleep_cpu_finish(v2p); @@ -197,6 +222,14 @@ void tegra_idle_lp2_last(void) cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + /* + * Resume L2 cache if it wasn't re-enabled early during resume, + * which is the case for Tegra30 that has to re-enable the cache + * via firmware call. In other cases cache is already enabled and + * hence re-enabling is a no-op. This is always a no-op on Tegra114+. + */ + outer_resume(); + restore_cpu_complex(); cpu_cluster_pm_exit(); } @@ -215,6 +248,15 @@ enum tegra_suspend_mode tegra_pm_validate_suspend_mode( static int tegra_sleep_core(unsigned long v2p) { + /* + * Cache have to be disabled with MMU-on if cache maintenance is done + * via Trusted Foundations firmware. This is a no-op on Tegra114+. + */ + if (trusted_foundations_registered()) + outer_disable(); + + call_firmware_op(prepare_idle, TF_PM_MODE_LP1); + setup_mm_for_reboot(); tegra_sleep_core_finish(v2p); @@ -342,6 +384,14 @@ static int tegra_suspend_enter(suspend_state_t state) cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func); + /* + * Resume L2 cache if it wasn't re-enabled early during resume, + * which is the case for Tegra30 that has to re-enable the cache + * via firmware call. In other cases cache is already enabled and + * hence re-enabling is a no-op. + */ + outer_resume(); + switch (mode) { case TEGRA_SUSPEND_LP1: tegra_suspend_exit_lp1(); diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index e22ccf87eded..cd94d7c41fc0 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -20,6 +20,7 @@ #include <soc/tegra/flowctrl.h> #include <soc/tegra/fuse.h> +#include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/cache.h> @@ -29,8 +30,6 @@ #define PMC_SCRATCH41 0x140 -#define RESET_DATA(x) ((TEGRA_RESET_##x)*4) - #ifdef CONFIG_PM_SLEEP /* * tegra_resume @@ -78,6 +77,7 @@ ENTRY(tegra_resume) orr r1, r1, #1 str r1, [r0] #endif + bl tegra_resume_trusted_foundations #ifdef CONFIG_CACHE_L2X0 /* L2 cache resume & re-enable */ @@ -90,6 +90,30 @@ end_ca9_scu_l2_resume: b cpu_resume ENDPROC(tegra_resume) + +/* + * tegra_resume_trusted_foundations + * + * Trusted Foundations firmware initialization. + * + * Doesn't return if firmware presents. + * Corrupted registers: r1, r2 + */ +ENTRY(tegra_resume_trusted_foundations) + /* Check whether Trusted Foundations firmware presents. */ + mov32 r2, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + ldr r1, =__tegra_cpu_reset_handler_data_offset + \ + RESET_DATA(TF_PRESENT) + ldr r1, [r2, r1] + cmp r1, #0 + reteq lr + + .arch_extension sec + /* First call after suspend wakes firmware. No arguments required. */ + smc #0 + + b cpu_resume +ENDPROC(tegra_resume_trusted_foundations) #endif .align L1_CACHE_SHIFT @@ -115,12 +139,19 @@ ENTRY(__tegra_cpu_reset_handler_start) * must be position-independent. */ + .arm .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler) cpsid aif, 0x13 @ SVC mode, interrupts disabled tegra_get_soc_id TEGRA_APB_MISC_BASE, r6 + + adr r12, __tegra_cpu_reset_handler_data + ldr r5, [r12, #RESET_DATA(TF_PRESENT)] + cmp r5, #0 + bne after_errata + #ifdef CONFIG_ARCH_TEGRA_2x_SOC t20_check: cmp r6, #TEGRA20 @@ -155,7 +186,6 @@ after_errata: and r10, r10, #0x3 @ R10 = CPU number mov r11, #1 mov r11, r11, lsl r10 @ R11 = CPU mask - adr r12, __tegra_cpu_reset_handler_data #ifdef CONFIG_SMP /* Does the OS know about this CPU? */ @@ -169,10 +199,9 @@ after_errata: cmp r6, #TEGRA20 bne 1f /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */ - mov32 r5, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET mov r0, #CPU_NOT_RESETTABLE cmp r10, #0 - strbne r0, [r5, #__tegra20_cpu1_resettable_status_offset] + strbne r0, [r12, #RESET_DATA(RESETTABLE_STATUS)] 1: #endif @@ -277,14 +306,13 @@ ENDPROC(__tegra_cpu_reset_handler) .align L1_CACHE_SHIFT .type __tegra_cpu_reset_handler_data, %object .globl __tegra_cpu_reset_handler_data + .globl __tegra_cpu_reset_handler_data_offset + .equ __tegra_cpu_reset_handler_data_offset, \ + . - __tegra_cpu_reset_handler_start __tegra_cpu_reset_handler_data: - .rept TEGRA_RESET_DATA_SIZE - .long 0 + .rept TEGRA_RESET_DATA_SIZE + .long 0 .endr - .globl __tegra20_cpu1_resettable_status_offset - .equ __tegra20_cpu1_resettable_status_offset, \ - . - __tegra_cpu_reset_handler_start - .byte 0 .align L1_CACHE_SHIFT ENTRY(__tegra_cpu_reset_handler_end) diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index dc558892753c..35dc5d419b6f 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -19,6 +19,8 @@ #include <linux/init.h> #include <linux/io.h> +#include <linux/firmware/trusted_foundations.h> + #include <soc/tegra/fuse.h> #include <asm/cacheflush.h> @@ -89,6 +91,8 @@ static void __init tegra_cpu_reset_handler_enable(void) void __init tegra_cpu_reset_handler_init(void) { + __tegra_cpu_reset_handler_data[TEGRA_RESET_TF_PRESENT] = + trusted_foundations_registered(); #ifdef CONFIG_SMP __tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] = diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index 9c479c7925b8..db0e6b3097ab 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -25,7 +25,11 @@ #define TEGRA_RESET_STARTUP_SECONDARY 3 #define TEGRA_RESET_STARTUP_LP2 4 #define TEGRA_RESET_STARTUP_LP1 5 -#define TEGRA_RESET_DATA_SIZE 6 +#define TEGRA_RESET_RESETTABLE_STATUS 6 +#define TEGRA_RESET_TF_PRESENT 7 +#define TEGRA_RESET_DATA_SIZE 8 + +#define RESET_DATA(x) ((TEGRA_RESET_##x)*4) #ifndef __ASSEMBLY__ @@ -49,7 +53,8 @@ void __tegra_cpu_reset_handler_end(void); (u32)__tegra_cpu_reset_handler_start))) #define tegra20_cpu1_resettable_status \ (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ - (u32)__tegra20_cpu1_resettable_status_offset)) + ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_RESETTABLE_STATUS] - \ + (u32)__tegra_cpu_reset_handler_start))) #endif #define tegra_cpu_reset_handler_offset \ diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index dedeebfccc55..50d51d3465f6 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -28,6 +28,7 @@ #include <asm/cache.h> #include "irammap.h" +#include "reset.h" #include "sleep.h" #define EMC_CFG 0xc @@ -53,6 +54,9 @@ #define APB_MISC_XM2CFGCPADCTRL2 0x8e4 #define APB_MISC_XM2CFGDPADCTRL2 0x8e8 +#define __tegra20_cpu1_resettable_status_offset \ + (__tegra_cpu_reset_handler_data_offset + RESET_DATA(RESETTABLE_STATUS)) + .macro pll_enable, rd, r_car_base, pll_base ldr \rd, [\r_car_base, #\pll_base] tst \rd, #(1 << 30) diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index d0b4c486ddbf..7727e005c30e 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -44,8 +44,6 @@ #define EMC_XM2VTTGENPADCTRL 0x310 #define EMC_XM2VTTGENPADCTRL2 0x314 -#define MC_EMEM_ARB_CFG 0x90 - #define PMC_CTRL 0x0 #define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */ @@ -420,22 +418,6 @@ _pll_m_c_x_done: movweq r0, #:lower16:TEGRA124_EMC_BASE movteq r0, #:upper16:TEGRA124_EMC_BASE - cmp r10, #TEGRA30 - moveq r2, #0x20 - movweq r4, #:lower16:TEGRA_MC_BASE - movteq r4, #:upper16:TEGRA_MC_BASE - cmp r10, #TEGRA114 - moveq r2, #0x34 - movweq r4, #:lower16:TEGRA114_MC_BASE - movteq r4, #:upper16:TEGRA114_MC_BASE - cmp r10, #TEGRA124 - moveq r2, #0x20 - movweq r4, #:lower16:TEGRA124_MC_BASE - movteq r4, #:upper16:TEGRA124_MC_BASE - - ldr r1, [r5, r2] @ restore MC_EMEM_ARB_CFG - str r1, [r4, #MC_EMEM_ARB_CFG] - exit_self_refresh: ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL str r1, [r0, #EMC_XM2VTTGENPADCTRL] @@ -564,7 +546,6 @@ tegra30_sdram_pad_address: .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14 .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18 .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c - .word TEGRA_MC_BASE + MC_EMEM_ARB_CFG @0x20 tegra30_sdram_pad_address_end: tegra114_sdram_pad_address: @@ -581,7 +562,6 @@ tegra114_sdram_pad_address: .word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28 .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30 - .word TEGRA114_MC_BASE + MC_EMEM_ARB_CFG @0x34 tegra114_sdram_pad_adress_end: tegra124_sdram_pad_address: @@ -593,7 +573,6 @@ tegra124_sdram_pad_address: .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14 .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18 .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c - .word TEGRA124_MC_BASE + MC_EMEM_ARB_CFG @0x20 tegra124_sdram_pad_address_end: tegra30_sdram_pad_size: diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 5e3496753df1..1735ded5a812 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -49,8 +49,9 @@ ENTRY(tegra_disable_clean_inv_dcache) /* Disable the D-cache */ mrc p15, 0, r2, c1, c0, 0 + tst r2, #CR_C @ see tegra_sleep_cpu() bic r2, r2, #CR_C - mcr p15, 0, r2, c1, c0, 0 + mcrne p15, 0, r2, c1, c0, 0 isb /* Flush the D-cache */ @@ -132,10 +133,13 @@ ENTRY(tegra_shut_off_mmu) #ifdef CONFIG_CACHE_L2X0 /* Disable L2 cache */ check_cpu_part_num 0xc09, r9, r10 - movweq r2, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000) - movteq r2, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000) - moveq r3, #0 - streq r3, [r2, #L2X0_CTRL] + retne r0 + + mov32 r2, TEGRA_ARM_PERIF_BASE + 0x3000 + ldr r3, [r2, #L2X0_CTRL] + tst r3, #L2X0_CTRL_EN @ see tegra_sleep_cpu() + mov r3, #0 + strne r3, [r2, #L2X0_CTRL] #endif ret r0 ENDPROC(tegra_shut_off_mmu) diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index f9587be48235..3e88f67dd521 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -35,15 +35,17 @@ #include <linux/sys_soc.h> #include <linux/usb/tegra_usb_phy.h> +#include <linux/firmware/trusted_foundations.h> + #include <soc/tegra/fuse.h> #include <soc/tegra/pmc.h> +#include <asm/firmware.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach-types.h> #include <asm/setup.h> -#include <asm/trusted_foundations.h> #include "board.h" #include "common.h" @@ -74,6 +76,7 @@ static void __init tegra_init_early(void) { of_register_trusted_foundations(); tegra_cpu_reset_handler_init(); + call_firmware_op(l2x0_init); } static void __init tegra_dt_init_irq(void) diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c index 595b574c2c50..96ec72bd3928 100644 --- a/arch/arm/mach-u300/regulator.c +++ b/arch/arm/mach-u300/regulator.c @@ -130,3 +130,5 @@ static int __init u300_init_boardpower(void) } device_initcall(u300_init_boardpower); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Linus Walleij"); diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index f51919974183..bf25f780c1c9 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -183,18 +183,12 @@ static int pxa_ssp_probe(struct platform_device *pdev) static int pxa_ssp_remove(struct platform_device *pdev) { - struct resource *res; struct ssp_device *ssp; ssp = platform_get_drvdata(pdev); if (ssp == NULL) return -ENODEV; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, resource_size(res)); - - clk_put(ssp->clk); - mutex_lock(&ssp_lock); list_del(&ssp->node); mutex_unlock(&ssp_lock); diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index b5ca9c50876d..0f4d91824e4b 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -7,6 +7,11 @@ config ARCH_ACTIONS help This enables support for the Actions Semiconductor S900 SoC family. +config ARCH_AGILEX + bool "Intel's Agilex SoCFPGA Family" + help + This enables support for Intel's Agilex SoCFPGA Family. + config ARCH_SUNXI bool "Allwinner sunxi 64-bit SoC Family" select ARCH_HAS_RESET_CONTROLLER diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 5bc7533a12c7..f19b762c008d 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -13,6 +13,7 @@ subdir-y += cavium subdir-y += exynos subdir-y += freescale subdir-y += hisilicon +subdir-y += intel subdir-y += lg subdir-y += marvell subdir-y += mediatek diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 0b0917111099..f6db0611cb85 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5205-5inmfd.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb @@ -19,6 +20,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-beelink-gs1.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts index 6cb2b7f0c817..019ae09ea0fd 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -22,6 +22,41 @@ stdout-path = "serial0:115200n8"; }; + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_mclk_pin>; + clocks = <&ccu CLK_CSI_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_aldo1>; + DOVDD-supply = <®_dldo3>; + DVDD-supply = <®_eldo3>; + reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* CSI-RST-R: PE14 */ + powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* CSI-STBY-R: PE15 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; + }; + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rtc 1>; @@ -30,10 +65,40 @@ }; }; +&csi { + status = "okay"; + + port { + csi_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + &ehci0 { status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + sensor@48 { + compatible = "st,stlm75"; + reg = <0x48>; + }; +}; + +&i2c0_pins { + bias-pull-up; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 7793ebb5d2b8..0a56c0c23ba1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -104,7 +104,7 @@ }; &codec_analog { - hpvcc-supply = <®_eldo1>; + cpvdd-supply = <®_eldo1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts new file mode 100644 index 000000000000..6a2154525d1e --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Oceanic Systems (UK) Ltd. + * Copyright (C) 2019 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "sun50i-a64-sopine.dtsi" + +/ { + model = "Oceanic 5205 5inMFD"; + compatible = "oceanic,5205-5inmfd", "allwinner,sun50i-a64"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dc1sw>; + allwinner,tx-delay-ps = <600>; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&ohci0 { + status = "okay"; +}; + +®_dc1sw { + regulator-name = "vcc-phy"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index c0b9cc7a6b3a..b7ac6374b178 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -80,7 +80,7 @@ }; &codec_analog { - hpvcc-supply = <®_eldo1>; + cpvdd-supply = <®_eldo1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index d22736a62481..2b6345db7dc0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -94,7 +94,7 @@ }; &codec_analog { - hpvcc-supply = <®_eldo1>; + cpvdd-supply = <®_eldo1>; status = "okay"; }; @@ -104,7 +104,6 @@ &ehci0 { phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; @@ -151,7 +150,6 @@ &ohci0 { phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index d2651f284aa0..9d20e13f0c02 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -48,7 +48,7 @@ #include <dt-bindings/gpio/gpio.h> &codec_analog { - hpvcc-supply = <®_eldo1>; + cpvdd-supply = <®_eldo1>; }; &mmc0 { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 7b7b14ba58e6..0ec46b969a75 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -21,6 +21,15 @@ serial0 = &uart0; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 0>; + power-supply = <®_dcdc1>; + brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>; + default-brightness-level = <5>; + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ + }; + chosen { stdout-path = "serial0:115200n8"; @@ -131,6 +140,10 @@ status = "okay"; }; +&pwm { + status = "okay"; +}; + &r_rsb { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index e628d063931b..8c5b521e6389 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -217,7 +217,7 @@ #size-cells = <1>; ranges; - de2@1000000 { + bus@1000000 { compatible = "allwinner,sun50i-a64-de2"; reg = <0x1000000 0x400000>; allwinner,sram = <&de2_sram 1>; @@ -251,11 +251,19 @@ #size-cells = <0>; mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; - mixer0_out_tcon0: endpoint { + mixer0_out_tcon0: endpoint@0 { + reg = <0>; remote-endpoint = <&tcon0_in_mixer0>; }; + + mixer0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_mixer0>; + }; }; }; }; @@ -274,9 +282,17 @@ #size-cells = <0>; mixer1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; - mixer1_out_tcon1: endpoint { + mixer1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer1>; + }; + + mixer1_out_tcon1: endpoint@1 { + reg = <1>; remote-endpoint = <&tcon1_in_mixer1>; }; }; @@ -338,6 +354,7 @@ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; @@ -354,6 +371,11 @@ reg = <0>; remote-endpoint = <&mixer0_out_tcon0>; }; + + tcon0_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon0>; + }; }; tcon0_out: port@1 { @@ -379,9 +401,17 @@ #size-cells = <0>; tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - tcon1_in_mixer1: endpoint { + tcon1_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon1>; + }; + + tcon1_in_mixer1: endpoint@1 { + reg = <1>; remote-endpoint = <&mixer1_out_tcon1>; }; }; @@ -467,6 +497,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -522,7 +553,6 @@ resets = <&ccu RST_BUS_OHCI1>, <&ccu RST_BUS_EHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -534,7 +564,6 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -553,7 +582,8 @@ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 58>; + clocks = <&ccu 58>, <&osc24M>, <&rtc 0>; + clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; @@ -565,12 +595,18 @@ function = "csi"; }; - i2c0_pins: i2c0_pins { + /omit-if-no-ref/ + csi_mclk_pin: csi-mclk-pin { + pins = "PE1"; + function = "csi"; + }; + + i2c0_pins: i2c0-pins { pins = "PH0", "PH1"; function = "i2c0"; }; - i2c1_pins: i2c1_pins { + i2c1_pins: i2c1-pins { pins = "PH2", "PH3"; function = "i2c1"; }; @@ -607,19 +643,19 @@ bias-pull-up; }; - pwm_pin: pwm_pin { + pwm_pin: pwm-pin { pins = "PD22"; function = "pwm"; }; - rmii_pins: rmii_pins { + rmii_pins: rmii-pins { pins = "PD10", "PD11", "PD13", "PD14", "PD17", "PD18", "PD19", "PD20", "PD22", "PD23"; function = "emac"; drive-strength = <40>; }; - rgmii_pins: rgmii_pins { + rgmii_pins: rgmii-pins { pins = "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD15", "PD16", "PD17", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23"; @@ -627,17 +663,17 @@ drive-strength = <40>; }; - spdif_tx_pin: spdif { + spdif_tx_pin: spdif-tx-pin { pins = "PH8"; function = "spdif"; }; - spi0_pins: spi0 { + spi0_pins: spi0-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; }; - spi1_pins: spi1 { + spi1_pins: spi1-pins { pins = "PD0", "PD1", "PD2", "PD3"; function = "spi1"; }; @@ -647,12 +683,12 @@ function = "uart0"; }; - uart1_pins: uart1_pins { + uart1_pins: uart1-pins { pins = "PG6", "PG7"; function = "uart1"; }; - uart1_rts_cts_pins: uart1_rts_cts_pins { + uart1_rts_cts_pins: uart1-rts-cts-pins { pins = "PG8", "PG9"; function = "uart1"; }; @@ -730,7 +766,6 @@ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; clock-names = "apb", "mod"; resets = <&ccu RST_BUS_CODEC>; - reset-names = "rst"; dmas = <&dma 15>, <&dma 15>; dma-names = "rx", "tx"; status = "disabled"; @@ -1064,12 +1099,12 @@ function = "s_i2c"; }; - r_pwm_pin: pwm { + r_pwm_pin: r-pwm-pin { pins = "PL10"; function = "s_pwm"; }; - r_rsb_pins: rsb { + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts index 85e7993a74e7..62409afbaf06 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -46,7 +46,6 @@ vdd_cpux: gpio-regulator { compatible = "regulator-gpio"; - pinctrl-names = "default"; regulator-name = "vdd-cpux"; regulator-type = "voltage"; regulator-boot-on; @@ -133,7 +132,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi index e4d50373c8ef..82f4b44d525f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -21,7 +21,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 506e25ba028a..9887948d5c86 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -78,7 +78,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -96,7 +95,6 @@ vdd_cpux: gpio-regulator { compatible = "regulator-gpio"; - pinctrl-names = "default"; regulator-name = "vdd-cpux"; regulator-type = "voltage"; regulator-boot-on; @@ -112,7 +110,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ post-power-on-delay-ms = <200>; }; @@ -191,7 +188,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index cc268a69786c..57a6f45036c1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -142,7 +142,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index 3e0d5a9c096d..e126c1c9f05c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -180,7 +180,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -221,7 +221,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index b75ca4d7d001..d9b3ed257088 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -187,7 +187,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&r_ir_rx_pin>; status = "okay"; }; @@ -224,7 +224,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts index 1238de25a969..db6ea7b58999 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts @@ -127,7 +127,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index 53c8c11620e0..dacf61399527 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -78,7 +78,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ post-power-on-delay-ms = <200>; }; @@ -134,7 +133,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 96acafd3a852..f002a496d7cb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -209,3 +209,7 @@ &rtc { compatible = "allwinner,sun50i-h5-rtc"; }; + +&sid { + compatible = "allwinner,sun50i-h5-sid"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts new file mode 100644 index 000000000000..0dc33c90dd60 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2019 Clément Péron <peron.clem@gmail.com> + */ + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Beelink GS1"; + compatible = "azw,beelink-gs1", "allwinner,sun50i-h6"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "beelink:white:power"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + default-state = "on"; + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC jack */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&ext_rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_aldo2>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mmc0 { + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_cldo1>; + vqmmc-supply = <®_bldo2>; + non-removable; + cap-mmc-hw-reset; + bus-width = <8>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_aldo1>; +}; + +&r_i2c { + status = "okay"; + + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ac200"; + regulator-enable-ramp-delay = <100000>; + }; + + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc25-dram"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-io"; + }; + + reg_bldo3: bldo3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dcxoio"; + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&r_pio { + /* + * PL0 and PL1 are used for PMIC I2C + * don't enable the pl-supply else + * it will fail at boot + * + * vcc-pl-supply = <®_aldo1>; + */ + vcc-pm-supply = <®_aldo1>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usb2otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy { + usb0_vbus-supply = <®_vcc5v>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts new file mode 100644 index 000000000000..17d496990108 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2019 OndÅ™ej Jirman <megous@megous.com> + */ + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi 3"; + compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "orangepi:red:power"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + default-state = "on"; + }; + + status { + label = "orangepi:green:status"; + gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC jack */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdca>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_bldo2>; + vcc-pd-supply = <®_cldo1>; +}; + +&r_i2c { + status = "okay"; + + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl-led-ir"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33-audio-tv-ephy-mac"; + }; + + /* ALDO3 is shorted to CLDO1 */ + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18-dram-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-pc"; + }; + + bldo3 { + /* unused */ + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2"; + }; + + cldo2 { + /* unused */ + }; + + cldo3 { + /* unused */ + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usb2otg { + /* + * This board doesn't have a controllable VBUS even though it + * does have an ID pin. Using it as anything but a USB host is + * unsafe. + */ + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy { + usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */ + usb0_vbus-supply = <®_vcc5v>; + usb3_vbus-supply = <®_vcc5v>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index b2526dac2fcf..62e27948a3fa 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -56,8 +56,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; bus-width = <4>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index bdb8470fc8dc..4802902e128f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -104,8 +104,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; bus-width = <4>; @@ -113,8 +111,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; vmmc-supply = <®_cldo1>; vqmmc-supply = <®_bldo2>; non-removable; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index c9e861a50a63..16c5c3d0fd81 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -101,7 +101,7 @@ #size-cells = <1>; ranges; - display-engine@1000000 { + bus@1000000 { compatible = "allwinner,sun50i-h6-de3", "allwinner,sun50i-a64-de2"; reg = <0x1000000 0x400000>; @@ -146,6 +146,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun50i-h6-video-engine"; + reg = <0x01c0e000 0x2000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_MBUS_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + syscon: syscon@3000000 { compatible = "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"; @@ -192,6 +203,11 @@ #reset-cells = <1>; }; + sid: sid@3006000 { + compatible = "allwinner,sun50i-h6-sid"; + reg = <0x03006000 0x400>; + }; + pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>; @@ -206,7 +222,7 @@ interrupt-controller; #interrupt-cells = <3>; - ext_rgmii_pins: rgmii_pins { + ext_rgmii_pins: rgmii-pins { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD19", "PD20"; @@ -227,6 +243,15 @@ bias-pull-up; }; + /omit-if-no-ref/ + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + mmc2_pins: mmc2-pins { pins = "PC1", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", @@ -236,7 +261,7 @@ bias-pull-up; }; - uart0_ph_pins: uart0-ph { + uart0_ph_pins: uart0-ph-pins { pins = "PH0", "PH1"; function = "uart0"; }; @@ -262,6 +287,8 @@ resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -276,6 +303,8 @@ resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -290,6 +319,8 @@ resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -425,7 +456,6 @@ resets = <&ccu RST_BUS_OHCI3>, <&ccu RST_BUS_EHCI3>; phys = <&usb2phy 3>; - phy-names = "usb"; status = "disabled"; }; @@ -437,7 +467,6 @@ <&ccu CLK_USB_OHCI3>; resets = <&ccu RST_BUS_OHCI3>; phys = <&usb2phy 3>; - phy-names = "usb"; status = "disabled"; }; @@ -614,7 +643,7 @@ interrupt-controller; #interrupt-cells = <3>; - r_i2c_pins: r-i2c { + r_i2c_pins: r-i2c-pins { pins = "PL0", "PL1"; function = "s_i2c"; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 2e3863ee12b3..d037563ad21c 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -107,6 +107,7 @@ &mmc { status = "okay"; cap-sd-highspeed; + cap-mmc-highspeed; broken-cd; bus-width = <4>; }; @@ -159,7 +160,7 @@ #size-cells = <1>; compatible = "n25q00a"; reg = <0>; - spi-max-frequency = <50000000>; + spi-max-frequency = <100000000>; m25p,fast-read; cdns,page-size = <256>; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 0821fed4c074..e129c03ced14 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts new file mode 100644 index 000000000000..34b40587e5ef --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +/ { + compatible = "seirobotics,sei510", "amlogic,g12a"; + model = "SEI Robotics SEI510"; + + aliases { + serial0 = &uart_AO; + }; + + adc_keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-onoff { + label = "On/Off"; + linux,code = <KEY_POWER>; + press-threshold-microvolt = <1700000>; + }; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + /* TEE Reserved Memory */ + bl32_reserved: bl32@5000000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddao_3v3_t: regultor-vddao_3v3_t { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3_T"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vddio_ao1v8: regulator-vddio_ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index c44dbdddf2cf..0e8045b8a915 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "meson-g12a.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> / { compatible = "amlogic,u200", "amlogic,g12a"; @@ -21,9 +23,154 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; }; &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; +&usb { + status = "okay"; + vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; + +&usb2_phy1 { + phy-supply = <&vcc_5v>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index c62d3d5706ff..b3d913f28f12 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "meson-g12a.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> / { compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a"; @@ -21,8 +23,146 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-low; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + }; }; &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index 17c6217f8a84..9f72396ba710 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -3,9 +3,13 @@ * Copyright (c) 2018 Amlogic, Inc. All rights reserved. */ +#include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/g12a-clkc.h> +#include <dt-bindings/clock/g12a-aoclkc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-g12a-reset.h> / { compatible = "amlogic,g12a"; @@ -55,6 +59,14 @@ }; }; + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -70,6 +82,18 @@ reg = <0x0 0x05000000 0x0 0x300000>; no-map; }; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x10000000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; + }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; }; soc { @@ -85,12 +109,177 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; + hdmi_tx: hdmi-tx@0 { + compatible = "amlogic,meson-g12a-dw-hdmi"; + reg = <0x0 0x0 0x0 0x10000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMITX_PHY>, + <&reset RESET_HDMITX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + clock-names = "isfr", "iahb", "venci"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + /* VPU VENC Input */ + hdmi_tx_venc_port: port@0 { + reg = <0>; + + hdmi_tx_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + + /* TMDS Output */ + hdmi_tx_tmds_port: port@1 { + reg = <1>; + }; + }; + periphs: bus@34400 { compatible = "simple-bus"; reg = <0x0 0x34400 0x0 0x400>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; + + periphs_pinctrl: pinctrl@40 { + compatible = "amlogic,meson-g12a-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@40 { + reg = <0x0 0x40 0x0 0x4c>, + <0x0 0xe8 0x0 0x18>, + <0x0 0x120 0x0 0x18>, + <0x0 0x2c0 0x0 0x40>, + <0x0 0x340 0x0 0x1c>; + reg-names = "gpio", + "pull", + "pull-enable", + "mux", + "ds"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 86>; + }; + + cec_ao_a_h_pins: cec_ao_a_h { + mux { + groups = "cec_ao_a_h"; + function = "cec_ao_a_h"; + bias-disable; + }; + }; + + cec_ao_b_h_pins: cec_ao_b_h { + mux { + groups = "cec_ao_b_h"; + function = "cec_ao_b_h"; + bias-disable; + }; + }; + + hdmitx_ddc_pins: hdmitx_ddc { + mux { + groups = "hdmitx_sda", + "hdmitx_sck"; + function = "hdmitx"; + bias-disable; + }; + }; + + hdmitx_hpd_pins: hdmitx_hpd { + mux { + groups = "hdmitx_hpd_in"; + function = "hdmitx"; + bias-disable; + }; + }; + + uart_a_pins: uart-a { + mux { + groups = "uart_a_tx", + "uart_a_rx"; + function = "uart_a"; + bias-disable; + }; + }; + + uart_a_cts_rts_pins: uart-a-cts-rts { + mux { + groups = "uart_a_cts", + "uart_a_rts"; + function = "uart_a"; + bias-disable; + }; + }; + + uart_b_pins: uart-b { + mux { + groups = "uart_b_tx", + "uart_b_rx"; + function = "uart_b"; + bias-disable; + }; + }; + + uart_c_pins: uart-c { + mux { + groups = "uart_c_tx", + "uart_c_rx"; + function = "uart_c"; + bias-disable; + }; + }; + + uart_c_cts_rts_pins: uart-c-cts-rts { + mux { + groups = "uart_c_cts", + "uart_c_rts"; + function = "uart_c"; + bias-disable; + }; + }; + }; + }; + + usb2_phy0: phy@36000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x36000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY20>; + reset-names = "phy"; + #phy-cells = <0>; + }; + + dmc: bus@38000 { + compatible = "simple-bus"; + reg = <0x0 0x38000 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,canvas"; + reg = <0x0 0x48 0x0 0x14>; + }; + }; + + usb2_phy1: phy@3a000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x3a000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY21>; + reset-names = "phy"; + #phy-cells = <0>; }; hiu: bus@3c000 { @@ -113,6 +302,18 @@ }; }; }; + + usb3_pcie_phy: phy@46000 { + compatible = "amlogic,g12a-usb3-pcie-phy"; + reg = <0x0 0x46000 0x0 0x2000>; + clocks = <&clkc CLKID_PCIE_PLL>; + clock-names = "ref_clk"; + resets = <&reset RESET_PCIE_PHY>; + reset-names = "phy"; + assigned-clocks = <&clkc CLKID_PCIE_PLL>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + }; }; aobus: bus@ff800000 { @@ -122,6 +323,128 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + rti: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", + "simple-mfd", "syscon"; + reg = <0x0 0x0 0x0 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-g12a-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; + }; + + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-g12a-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&hhi>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ + }; + + ao_pinctrl: pinctrl@14 { + compatible = "amlogic,meson-g12a-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x14 0x0 0x8>, + <0x0 0x1c 0x0 0x8>, + <0x0 0x24 0x0 0x14>; + reg-names = "mux", + "ds", + "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ao_pinctrl 0 0 15>; + }; + + uart_ao_a_pins: uart-a-ao { + mux { + groups = "uart_ao_a_tx", + "uart_ao_a_rx"; + function = "uart_ao_a"; + bias-disable; + }; + }; + + uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { + mux { + groups = "uart_ao_a_cts", + "uart_ao_a_rts"; + function = "uart_ao_a"; + bias-disable; + }; + }; + }; + }; + + cec_AO: cec@100 { + compatible = "amlogic,meson-gx-ao-cec"; + reg = <0x0 0x00100 0x0 0x14>; + interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_AO CLKID_AO_CEC>; + clock-names = "core"; + status = "disabled"; + }; + + sec_AO: ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; + }; + + cecb_AO: cec@280 { + compatible = "amlogic,meson-g12a-ao-cec"; + reg = <0x0 0x00280 0x0 0x1c>; + interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; + clock-names = "oscin"; + status = "disabled"; + }; + uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; @@ -141,6 +464,46 @@ clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + saradc: adc@9000 { + compatible = "amlogic,meson-g12a-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x9000 0x0 0x48>; + #io-channel-cells = <1>; + interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + status = "disabled"; + }; + }; + + vpu: vpu@ff900000 { + compatible = "amlogic,meson-g12a-vpu"; + reg = <0x0 0xff900000 0x0 0x100000>, + <0x0 0xff63c000 0x0 0x1000>; + reg-names = "vpu", "hhi"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + amlogic,canvas = <&canvas>; + power-domains = <&pwrc_vpu>; + + /* CVBS VDAC output port */ + cvbs_vdac_port: port@0 { + reg = <0>; + }; + + /* HDMI-TX output port */ + hdmi_tx_port: port@1 { + reg = <1>; + + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_tx_in>; + }; + }; }; gic: interrupt-controller@ffc01000 { @@ -163,10 +526,112 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; + reset: reset-controller@1004 { + compatible = "amlogic,meson-g12a-reset", + "amlogic,meson-axg-reset"; + reg = <0x0 0x1004 0x0 0x9c>; + #reset-cells = <1>; + }; + clk_msr: clock-measure@18000 { compatible = "amlogic,meson-g12a-clk-measure"; reg = <0x0 0x18000 0x0 0x10>; }; + + uart_C: serial@22000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x22000 0x0 0x18>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_B: serial@23000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x23000 0x0 0x18>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_A: serial@24000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x24000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + usb: usb@ffe09000 { + status = "disabled"; + compatible = "amlogic,meson-g12a-usb-ctrl"; + reg = <0x0 0xffe09000 0x0 0xa0>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>; + resets = <&reset RESET_USB>; + + dr_mode = "otg"; + + phys = <&usb2_phy0>, <&usb2_phy1>, + <&usb3_pcie_phy PHY_TYPE_USB3>; + phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; + + dwc2: usb@ff400000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0x0 0xff400000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "ddr"; + phys = <&usb2_phy1>; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_u2_susphy_quirk; + snps,quirk-frame-length-adjustment; + }; + }; + + mali: gpu@ffe40000 { + compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; + reg = <0x0 0xffe40000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpu", "mmu", "job"; + clocks = <&clkc CLKID_MALI>; + resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <800000000>, + <0>; /* Do Nothing */ }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts index 9a8a8a7e4b53..b5667f1fb2c8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts @@ -14,6 +14,16 @@ cvbs-connector { status = "disabled"; }; + + leds { + compatible = "gpio-leds"; + + status { + label = "n1:white:status"; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; }; &cvbs_vdac_port { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 8acfd40090d2..25f3b6b14043 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -178,3 +178,7 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index ed3a3d5adf31..7a85a82bf65d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -91,6 +91,33 @@ reset-names = "phy"; status = "okay"; }; + + mali: gpu@c0000 { + compatible = "amlogic,meson-gxm-mali", "arm,mali-t820"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpu", "mmu", "job"; + clocks = <&clkc CLKID_MALI>; + resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>; /* Do Nothing */ + }; }; &clkc_AO { diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts index 6a3255597138..3e8c70778e24 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts +++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts @@ -8,6 +8,28 @@ #include "bm1880.dtsi" +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "sophon-edge-schematics" + * version, 1.0210. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence. This is only for the informational + * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L" + * are the only ones actually used for GPIO. + */ + / { compatible = "bitmain,sophon-edge", "bitmain,bm1880"; model = "Sophon Edge"; @@ -32,19 +54,140 @@ clock-frequency = <500000000>; #clock-cells = <0>; }; + + soc { + gpio0: gpio@50027000 { + porta: gpio-controller@0 { + gpio-line-names = + "GPIO-A", /* GPIO0, LSEC pin 23 */ + "GPIO-C", /* GPIO1, LSEC pin 25 */ + "[GPIO2_PHY0_RST]", /* GPIO2 */ + "GPIO-E", /* GPIO3, LSEC pin 27 */ + "[USB_DET]", /* GPIO4 */ + "[EN_P5V]", /* GPIO5 */ + "[VDDIO_MS1_SEL]", /* GPIO6 */ + "GPIO-G", /* GPIO7, LSEC pin 29 */ + "[BM_TUSB_RST_L]", /* GPIO8 */ + "[EN_P5V_USBHUB]", /* GPIO9 */ + "NC", + "LED_WIFI", /* GPIO11 */ + "LED_BT", /* GPIO12 */ + "[BM_BLM8221_EN_L]", /* GPIO13 */ + "NC", /* GPIO14 */ + "NC", /* GPIO15 */ + "NC", /* GPIO16 */ + "NC", /* GPIO17 */ + "NC", /* GPIO18 */ + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "NC", /* GPIO21 */ + "NC", /* GPIO22 */ + "NC", /* GPIO23 */ + "NC", /* GPIO24 */ + "NC", /* GPIO25 */ + "NC", /* GPIO26 */ + "NC", /* GPIO27 */ + "NC", /* GPIO28 */ + "NC", /* GPIO29 */ + "NC", /* GPIO30 */ + "NC"; /* GPIO31 */ + }; + }; + + gpio1: gpio@50027400 { + portb: gpio-controller@0 { + gpio-line-names = + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "[I2C0_SDA]", /* GPIO34, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO35, LSEC pin 15 */ + "[JTAG0_TDO]", /* GPIO36 */ + "[JTAG0_TCK]", /* GPIO37 */ + "[JTAG0_TDI]", /* GPIO38 */ + "[JTAG0_TMS]", /* GPIO39 */ + "[JTAG0_TRST_X]", /* GPIO40 */ + "[JTAG1_TDO]", /* GPIO41 */ + "[JTAG1_TCK]", /* GPIO42 */ + "[JTAG1_TDI]", /* GPIO43 */ + "[CPU_TX]", /* GPIO44 */ + "[CPU_RX]", /* GPIO45 */ + "[UART1_TXD]", /* GPIO46 */ + "[UART1_RXD]", /* GPIO47 */ + "[UART0_TXD]", /* GPIO48 */ + "[UART0_RXD]", /* GPIO49 */ + "GPIO-I", /* GPIO50, LSEC pin 31 */ + "GPIO-K", /* GPIO51, LSEC pin 33 */ + "USER_LED2", /* GPIO52 */ + "USER_LED1", /* GPIO53 */ + "[UART0_RTS]", /* GPIO54 */ + "[UART0_CTS]", /* GPIO55 */ + "USER_LED4", /* GPIO56, JTAG1_TRST_X */ + "USER_LED3", /* GPIO57, JTAG1_TMS */ + "[I2S0_SCLK]", /* GPIO58 */ + "[I2S0_FS]", /* GPIO59 */ + "[I2S0_SDI]", /* GPIO60 */ + "[I2S0_SDO]", /* GPIO61 */ + "GPIO-B", /* GPIO62, LSEC pin 24 */ + "GPIO-F"; /* GPIO63, I2S1_SCLK, LSEC pin 28 */ + }; + }; + + gpio2: gpio@50027800 { + portc: gpio-controller@0 { + gpio-line-names = + "GPIO-D", /* GPIO64, I2S1_FS, LSEC pin 26 */ + "GPIO-J", /* GPIO65, I2S1_SDI, LSEC pin 32 */ + "GPIO-H", /* GPIO66, I2S1_SDO, LSEC pin 30 */ + "GPIO-L", /* GPIO67, LSEC pin 34 */ + "[SPI0_CS]", /* GPIO68, SPI1_CS, LSEC pin 12 */ + "[SPI0_DIN]", /* GPIO69, SPI1_SDI, LSEC pin 10 */ + "[SPI0_DOUT]", /* GPIO70, SPI1_SDO, LSEC pin 14 */ + "[SPI0_SCLK]"; /* GPIO71, SPI1_SCK, LSEC pin 8 */ + }; + }; + }; +}; + +&pinctrl { + pinctrl_uart0_default: pinctrl-uart0-default { + pinmux { + groups = "uart0_grp"; + function = "uart0"; + }; + }; + + pinctrl_uart1_default: pinctrl-uart1-default { + pinmux { + groups = "uart1_grp"; + function = "uart1"; + }; + }; + + pinctrl_uart2_default: pinctrl-uart2-default { + pinmux { + groups = "uart2_grp"; + function = "uart2"; + }; + }; }; &uart0 { status = "okay"; clocks = <&uart_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; clocks = <&uart_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; &uart2 { status = "okay"; clocks = <&uart_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_default>; }; diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi index 55a4769e0de2..7726fd4c6be6 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi +++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi @@ -80,6 +80,74 @@ #interrupt-cells = <3>; }; + sctrl: system-controller@50010000 { + compatible = "bitmain,bm1880-sctrl", "syscon", + "simple-mfd"; + reg = <0x0 0x50010000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x50010000 0x1000>; + + pinctrl: pinctrl@50 { + compatible = "bitmain,bm1880-pinctrl"; + reg = <0x50 0x4B0>; + }; + }; + + gpio0: gpio@50027000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x0 0x50027000 0x0 0x400>; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio1: gpio@50027400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x0 0x50027400 0x0 0x400>; + + portb: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio2: gpio@50027800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0x0 0x50027800 0x0 0x400>; + + portc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + uart0: serial@58018000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x58018000 0x0 0x2000>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index d88e2f0e179a..d2de16645e10 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -289,6 +289,12 @@ assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; }; +&cmu_mif { + assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>; + assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>; + assigned-clock-rates = <0>, <333000000>; +}; + &cmu_mscl { assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index 3d7e0a782243..dda5d2746a74 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -33,7 +33,8 @@ <&cmu_disp CLK_MOUT_DISP_PLL>, <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, - <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>; + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>, + <&cmu_disp CLK_MOUT_SCLK_DSD_USER>; assigned-clock-parents = <0>, <0>, <&cmu_mif CLK_ACLK_DISP_333>, <&cmu_mif CLK_SCLK_DSIM0_DISP>, @@ -45,7 +46,8 @@ <&cmu_disp CLK_FOUT_DISP_PLL>, <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, - <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>; + <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, + <&cmu_mif CLK_SCLK_DSD_DISP>; assigned-clock-rates = <250000000>, <400000000>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index a04e80327b6e..d29d13f4694f 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -23,6 +23,31 @@ interrupt-parent = <&gic>; + arm_a53_pmu { + compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + arm_a57_pmu { + compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + xxti: clock { + /* XXTI */ + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -237,35 +262,11 @@ #size-cells = <1>; ranges; - arm_a53_pmu { - compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - arm_a57_pmu { - compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; - }; - chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; }; - xxti: xxti { - compatible = "fixed-clock"; - clock-output-names = "oscclk"; - #clock-cells = <0>; - }; - cmu_top: clock-controller@10030000 { compatible = "samsung,exynos5433-cmu-top"; reg = <0x10030000 0x1000>; @@ -559,6 +560,15 @@ <&cmu_top CLK_DIV_ACLK_IMEM_200>; }; + slim_sss: slim-sss@11140000 { + compatible = "samsung,exynos5433-slim-sss"; + reg = <0x11140000 0x1000>; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_imem CLK_ACLK_SLIMSSS>, + <&cmu_imem CLK_PCLK_SLIMSSS>; + }; + pd_gscl: power-domain@105c4000 { compatible = "samsung,exynos5433-pd"; reg = <0x105c4000 0x20>; @@ -848,12 +858,13 @@ <&cmu_disp CLK_ACLK_XIU_DECON1X>, <&cmu_disp CLK_PCLK_SMMU_DECON1X>, <&cmu_disp CLK_SCLK_DECON_VCLK>, - <&cmu_disp CLK_SCLK_DECON_ECLK>; + <&cmu_disp CLK_SCLK_DECON_ECLK>, + <&cmu_disp CLK_SCLK_DSD>; clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x", "pclk_smmu_decon1x", "sclk_decon_vclk", - "sclk_decon_eclk"; + "sclk_decon_eclk", "dsd"; power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, @@ -890,12 +901,13 @@ <&cmu_disp CLK_ACLK_XIU_TV1X>, <&cmu_disp CLK_PCLK_SMMU_TV1X>, <&cmu_disp CLK_SCLK_DECON_TV_VCLK>, - <&cmu_disp CLK_SCLK_DECON_TV_ECLK>; + <&cmu_disp CLK_SCLK_DECON_TV_ECLK>, + <&cmu_disp CLK_SCLK_DSD>; clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x", "pclk_smmu_decon1x", "sclk_decon_vclk", - "sclk_decon_eclk"; + "sclk_decon_eclk", "dsd"; samsung,disp-sysreg = <&syscon_disp>; power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; @@ -1022,11 +1034,12 @@ reg = <0x13c00000 0x1000>; interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; clock-names = "pclk", "aclk", "aclk_xiu", - "aclk_gsclbend"; + "aclk_gsclbend", "gsd"; clocks = <&cmu_gscl CLK_PCLK_GSCL0>, <&cmu_gscl CLK_ACLK_GSCL0>, <&cmu_gscl CLK_ACLK_XIU_GSCLX>, - <&cmu_gscl CLK_ACLK_GSCLBEND_333>; + <&cmu_gscl CLK_ACLK_GSCLBEND_333>, + <&cmu_gscl CLK_ACLK_GSD>; iommus = <&sysmmu_gscl0>; power-domains = <&pd_gscl>; }; @@ -1036,11 +1049,12 @@ reg = <0x13c10000 0x1000>; interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; clock-names = "pclk", "aclk", "aclk_xiu", - "aclk_gsclbend"; + "aclk_gsclbend", "gsd"; clocks = <&cmu_gscl CLK_PCLK_GSCL1>, <&cmu_gscl CLK_ACLK_GSCL1>, <&cmu_gscl CLK_ACLK_XIU_GSCLX>, - <&cmu_gscl CLK_ACLK_GSCLBEND_333>; + <&cmu_gscl CLK_ACLK_GSCLBEND_333>, + <&cmu_gscl CLK_ACLK_GSD>; iommus = <&sysmmu_gscl1>; power-domains = <&pd_gscl>; }; @@ -1050,11 +1064,12 @@ reg = <0x13c20000 0x1000>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; clock-names = "pclk", "aclk", "aclk_xiu", - "aclk_gsclbend"; + "aclk_gsclbend", "gsd"; clocks = <&cmu_gscl CLK_PCLK_GSCL2>, <&cmu_gscl CLK_ACLK_GSCL2>, <&cmu_gscl CLK_ACLK_XIU_GSCLX>, - <&cmu_gscl CLK_ACLK_GSCLBEND_333>; + <&cmu_gscl CLK_ACLK_GSCLBEND_333>, + <&cmu_gscl CLK_ACLK_GSD>; iommus = <&sysmmu_gscl2>; power-domains = <&pd_gscl>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 967558a93d82..077d23478901 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -28,6 +28,23 @@ tmuctrl0 = &tmuctrl_0; }; + arm-pmu { + compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>, + <&cpu_atlas2>, <&cpu_atlas3>; + }; + + fin_pll: clock { + /* XXTI */ + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -77,12 +94,6 @@ reg = <0x10000000 0x100>; }; - fin_pll: xxti { - compatible = "fixed-clock"; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; - gic: interrupt-controller@11001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -469,28 +480,6 @@ status = "disabled"; }; - arm-pmu { - compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>, - <&cpu_atlas2>, <&cpu_atlas3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; - }; - pmu_system_controller: system-controller@105c0000 { compatible = "samsung,exynos7-pmu", "syscon"; reg = <0x105c0000 0x5000>; @@ -635,6 +624,18 @@ }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; }; #include "exynos7-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 13604e558dc1..0bd122f60549 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -20,5 +20,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts index 7c726267ec8f..9927b096d343 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts @@ -87,6 +87,10 @@ status = "okay"; }; +&pcie { + status = "okay"; +}; + &sai2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 1ce0042b2a14..ec6257a5b251 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -475,7 +475,7 @@ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; }; - pcie@3400000 { + pcie: pcie@3400000 { compatible = "fsl,ls1012a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 14c79f4691ea..b359068d9605 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -32,6 +32,49 @@ device_type = "memory"; reg = <0x0 0x80000000 0x1 0x00000000>; }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; }; &duart0 { @@ -89,5 +132,24 @@ reg = <0x57>; }; }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + + sgtl5000: audio-codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + }; + }; }; }; + +&sai1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index f86b054a74ae..f9c272fb0738 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -28,6 +28,49 @@ device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0000000>; }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai4>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; }; &i2c0 { @@ -39,6 +82,22 @@ #address-cells = <1>; #size-cells = <0>; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + sgtl5000: audio-codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + sclk-strength = <3>; + }; + }; + i2c@2 { #address-cells = <1>; #size-cells = <0>; @@ -88,3 +147,7 @@ &enetc_port1 { status = "disabled"; }; + +&sai4 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 2896bbcfa3bb..b04581249f0b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -89,6 +89,11 @@ IRQ_TYPE_LEVEL_LOW)>; }; + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + gic: interrupt-controller@6000000 { compatible= "arm,gic-v3"; #address-cells = <2>; @@ -235,6 +240,21 @@ status = "disabled"; }; + edma0: dma-controller@22c0000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x22c0000 0x0 0x10000>, + <0x0 0x22d0000 0x0 0x10000>, + <0x0 0x22e0000 0x0 0x10000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen 4 1>, + <&clockgen 4 1>; + }; + gpio1: gpio@2300000 { compatible = "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; @@ -277,7 +297,7 @@ sata: sata@3200000 { compatible = "fsl,ls1028a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; + <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 1>; @@ -336,6 +356,48 @@ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; + sai1: audio-controller@f100000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf100000 0x0 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 4>, + <&edma0 1 3>; + status = "disabled"; + }; + + sai2: audio-controller@f110000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf110000 0x0 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 6>, + <&edma0 1 5>; + status = "disabled"; + }; + + sai4: audio-controller@f130000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf130000 0x0 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 10>, + <&edma0 1 9>; + status = "disabled"; + }; + pcie@1f0000000 { /* Integrated Endpoint Root Complex */ compatible = "pci-host-ecam-generic"; reg = <0x01 0xf0000000 0x0 0x100000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 17ca357e854f..4223a2352d45 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -15,7 +15,6 @@ model = "LS1043A RDB Board"; aliases { - crypto = &crypto; serial0 = &duart0; serial1 = &duart1; serial2 = &duart2; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 6fd6116509cc..71d9ed9ff985 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -18,6 +18,7 @@ #size-cells = <2>; aliases { + crypto = &crypto; fman0 = &fman0; ethernet0 = &enet0; ethernet1 = &enet1; @@ -296,7 +297,6 @@ interrupts = <0 99 0x4>; clock-names = "qspi_en", "qspi"; clocks = <&clockgen 4 0>, <&clockgen 4 0>; - big-endian; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index cb7185014d3a..b0ef08b090dd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -215,8 +215,6 @@ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; clock-names = "qspi_en", "qspi"; clocks = <&clockgen 4 1>, <&clockgen 4 1>; - big-endian; - fsl,qspi-has-second-chip; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 99a22abbe725..1a5acf62f23c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -95,6 +95,22 @@ }; }; +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 9df37b159415..c2817b784232 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -128,6 +128,22 @@ }; }; +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index fe87204850b5..125a8cc2c5b3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -33,6 +33,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@1 { @@ -48,6 +49,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@100 { @@ -63,6 +65,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@101 { @@ -78,6 +81,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@200 { @@ -93,6 +97,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@201 { @@ -108,6 +113,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@300 { @@ -123,6 +129,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@301 { @@ -138,6 +145,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@400 { @@ -153,6 +161,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@401 { @@ -168,6 +177,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@500 { @@ -183,6 +193,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@501 { @@ -198,6 +209,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@600 { @@ -213,6 +225,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@601 { @@ -228,6 +241,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@700 { @@ -243,6 +257,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; + cpu-idle-states = <&cpu_pw20>; }; cpu@701 { @@ -258,6 +273,7 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; + cpu-idle-states = <&cpu_pw20>; }; cluster0_l2: l2-cache0 { @@ -323,6 +339,15 @@ cache-sets = <1024>; cache-level = <2>; }; + + cpu_pw20: cpu-pw20 { + compatible = "arm,idle-state"; + idle-state-name = "PW20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; }; gic: interrupt-controller@6000000 { @@ -687,6 +712,50 @@ status = "disabled"; }; + sata0: sata@3200000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata1: sata@3210000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3210000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata2: sata@3220000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3220000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata3: sata@3230000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3230000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + smmu: iommu@5000000 { compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts new file mode 100644 index 000000000000..2d5d89475b76 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mm.dtsi" + +/ { + model = "FSL i.MX8MM EVK board"; + compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status { + label = "status"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + at803x,led-act-blind-workaround; + at803x,eee-okay; + at803x,vddio-1p8v; + }; + }; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi new file mode 100644 index 000000000000..6b407a94c06e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +#include "imx8mm-pinfunc.h" + +/ { + compatible = "fsl,imx8mm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &fec1; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <850000>; + clock-latency-ns = <150000>; + }; + + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock-ext2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock-ext3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock-ext4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ + <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ + clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x3e000000>; + + aips1: bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: watchdog@30280000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>; + status = "disabled"; + }; + + wdog2: watchdog@30290000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>; + status = "disabled"; + }; + + sdma2: dma-controller@302c0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x302c0000 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>, + <&clk IMX8MM_CLK_SDMA2_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + sdma3: dma-controller@302b0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x302b0000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>, + <&clk IMX8MM_CLK_SDMA3_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx8mm-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; + /* For nvmem subnodes */ + #address-cells = <1>; + #size-cells = <1>; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus"; + reg = <0x30360000 0x10000>; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + clk: clock-controller@30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + + src: reset-controller@30390000 { + compatible = "fsl,imx8mm-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + }; + + aips2: bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pwm1: pwm@30660000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM1_ROOT>, + <&clk IMX8MM_CLK_PWM1_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM2_ROOT>, + <&clk IMX8MM_CLK_PWM2_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM3_ROOT>, + <&clk IMX8MM_CLK_PWM3_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM4_ROOT>, + <&clk IMX8MM_CLK_PWM4_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + aips3: bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ecspi1: spi@30820000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, + <&clk IMX8MM_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi2: spi@30830000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, + <&clk IMX8MM_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi3: spi@30840000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, + <&clk IMX8MM_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@30860000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART1_ROOT>, + <&clk IMX8MM_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART3_ROOT>, + <&clk IMX8MM_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART2_ROOT>, + <&clk IMX8MM_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C1_ROOT>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C2_ROOT>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C3_ROOT>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C4_ROOT>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART4_ROOT>, + <&clk IMX8MM_CLK_UART4_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usdhc1: mmc@30b40000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC1_ROOT>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc@30b50000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC2_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc@30b60000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC3_ROOT>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + sdma1: dma-controller@30bd0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>, + <&clk IMX8MM_CLK_SDMA1_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ENET1_ROOT>, + <&clk IMX8MM_CLK_ENET1_ROOT>, + <&clk IMX8MM_CLK_ENET_TIMER>, + <&clk IMX8MM_CLK_ENET_REF>, + <&clk IMX8MM_CLK_ENET_PHY_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>, + <&clk IMX8MM_CLK_ENET_TIMER>, + <&clk IMX8MM_CLK_ENET_REF>, + <&clk IMX8MM_CLK_ENET_TIMER>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, + <&clk IMX8MM_SYS_PLL2_100M>, + <&clk IMX8MM_SYS_PLL2_125M>; + assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + status = "disabled"; + }; + + }; + + aips4: bus@32c00000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbotg1: usb@32e40000 { + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + reg = <0x32e40000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, + <&clk IMX8MM_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, + <&clk IMX8MM_SYS_PLL1_100M>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + status = "disabled"; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbmisc1: usbmisc@32e40200 { + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e40200 0x200>; + }; + + usbotg2: usb@32e50000 { + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + reg = <0x32e50000 0x200>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, + <&clk IMX8MM_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, + <&clk IMX8MM_SYS_PLL1_100M>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + status = "disabled"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbmisc2: usbmisc@32e50200 { + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e50200 0x200>; + }; + + }; + + dma_apbh: dma-controller@33000000 { + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x33000000 0x2000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + }; + + gpmi: nand-controller@33002000{ + compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x33002000 0x2000>, <0x33004000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clk IMX8MM_CLK_NAND_ROOT>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + clock-names = "gpmi_io", "gpmi_bch_apb"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 54737bf1772f..b2038be8bbd7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -21,6 +21,12 @@ reg = <0x00000000 0x40000000 0 0xc0000000>; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + reg_usdhc2_vmmc: regulator-vsd-3v3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; @@ -31,6 +37,63 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + buck2_reg: regulator-buck2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buck2>; + compatible = "regulator-gpio"; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + states = <1000000 0x0 + 900000 0x1>; + }; + + wm8524: audio-codec { + #sound-dai-cells = <0>; + compatible = "wlf,wm8524"; + wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + sound-wm8524 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8524-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,widgets = + "Line", "Left Line Out Jack", + "Line", "Right Line Out Jack"; + simple-audio-card,routing = + "Left Line Out Jack", "LINEVOUTL", + "Right Line Out Jack", "LINEVOUTR"; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + link_codec: simple-audio-card,codec { + sound-dai = <&wm8524>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; }; &fec1 { @@ -52,6 +115,26 @@ }; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; + + wl-reg-on { + gpio-hog; + gpios = <29 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -143,6 +226,22 @@ }; }; +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -203,6 +302,13 @@ }; &iomuxc { + pinctrl_buck2: vddarmgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19 + >; + + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 @@ -230,6 +336,13 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76 + MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28 0x16 + >; + }; + pinctrl_qspi: qspigrp { fsl,pins = < MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 @@ -248,6 +361,16 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xd6 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 @@ -347,4 +470,10 @@ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 >; }; + + pinctrl_wifi_reset: wifiresetgrp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts new file mode 100644 index 000000000000..d2a6da479980 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx8mq-zii-ultra.dtsi" + +/ { + model = "ZII i.MX8MQ Ultra RMB3 Board"; + compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + nor_flash: flash@0 { + compatible = "st,n25q128a13", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c2 { + temp-sense@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; +}; + +&i2c4 { + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <2>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + syna,sensor-type = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + syna,sensor-type = <1>; + }; + }; + + touchscreen@2a { + compatible = "eeti,exc3000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + reg = <0x2a>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + status = "disabled"; + }; +}; + +&usbhub { + swap-dx-lanes = <0>; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts new file mode 100644 index 000000000000..1084d9330403 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx8mq-zii-ultra.dtsi" + +/ { + model = "ZII i.MX8MQ Ultra Zest Board"; + compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq"; +}; + +&i2c4 { + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + reg = <0x4a>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi new file mode 100644 index 000000000000..7a1706f969f0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -0,0 +1,725 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +#include "imx8mq.dtsi" + +/ { + aliases { + mdio-gpio0 = &mdio0; + rtc0 = &ds1341; + }; + + chosen { + stdout-path = &uart1; + }; + + mdio0: bitbang-mdio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio_bitbang>, <&pinctrl_fec1_phy_reset>; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio1 14 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; + }; + + pcie0_refclk: clock-pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie1_refclk: clock-pcie1-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_12p0_main: regulator-12p0-main { + compatible = "regulator-fixed"; + regulator-name = "12V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_5p0_main: regulator-5p0-main { + compatible = "regulator-fixed"; + vin-supply = <®_12p0_main>; + regulator-name = "5V_MAIN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_3p3_main: regulator-3p3-main { + compatible = "regulator-fixed"; + vin-supply = <®_12p0_main>; + regulator-name = "3V3V_MAIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0_user_usb: regulator-5p0-user-usb { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_user_usb>; + vin-supply = <®_5p0_main>; + regulator-name = "5V_USER_USB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 12 GPIO_ACTIVE_LOW>; + startup-delay-us = <1000>; + }; + + reg_usdhc2_vmmc: regulator-vsd-3v3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2>; + compatible = "regulator-fixed"; + vin-supply = <®_3p3_main>; + regulator-name = "3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_arm: regulator-arm { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_arm>; + compatible = "regulator-gpio"; + vin-supply = <®_12p0_main>; + regulator-name = "0V9_ARM"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + states = <1000000 0x0 + 900000 0x1>; + regulator-always-on; + }; +}; + +&A53_0 { + cpu-supply = <®_arm>; +}; + +&A53_1 { + cpu-supply = <®_arm>; +}; + +&A53_2 { + cpu-supply = <®_arm>; +}; + +&A53_3 { + cpu-supply = <®_arm>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + + phy-handle = <&phy0>; + phy-mode = "rmii"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch: switch@0 { + compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_switch_irq>; + pinctrl-names = "default"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "gigabit_proc"; + phy-handle = <&switchphy0>; + }; + + port@1 { + reg = <1>; + label = "netaux"; + phy-handle = <&switchphy1>; + }; + + port@2 { + reg = <2>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@3 { + reg = <3>; + label = "netright"; + phy-handle = <&switchphy3>; + }; + + port@4 { + reg = <4>; + label = "netleft"; + phy-handle = <&switchphy4>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switchphy0: switchphy@0 { + reg = <0>; + interrupt-parent = <&switch>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy1: switchphy@1 { + reg = <1>; + interrupt-parent = <&switch>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy2: switchphy@2 { + reg = <2>; + interrupt-parent = <&switch>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy3: switchphy@3 { + reg = <3>; + interrupt-parent = <&switch>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + }; + + switchphy4: switchphy@4 { + reg = <4>; + interrupt-parent = <&switch>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + }; +}; + +&gpio3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio3_hog>; + + usb-emulation { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "usb-emulation"; + }; + + usb-mode1 { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-mode1"; + }; + + usb-mode2 { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-mode2"; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <975000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1675000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1625000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3625000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + + ds1341: rtc@68 { + compatible = "dallas,ds1341"; + reg = <0x68>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + usbhub: usbhub@2c { + compatible ="microchip,usb2513b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhub>; + reg = <0x2c>; + reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + zii,eeprom-name = "dds-eeprom"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usb3_phy0 { + vbus-supply = <®_5p0_user_usb>; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_5p0_main>; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_AUX>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie1>; + reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_AUX>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&pcie1_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vqmmc-supply = <&sw4_reg>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RX_ER 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + >; + }; + + pinctrl_fec1_phy_reset: fec1phyresetgrp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x11 + >; + }; + + pinctrl_gpio3_hog: gpio3hoggrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x6 + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x6 + MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13 0x6 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f + >; + }; + + pinctrl_mdio_bitbang: bitbangmdiogrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x44 + MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x64 + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B 0x66 + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x6 + >; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B 0x66 + MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x6 + >; + }; + + pinctrl_reg_arm: regarmgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + + pinctrl_reg_usdhc2: regusdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_reg_user_usb: reguserusbgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x6 + >; + }; + + pinctrl_switch_irq: switchgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x96 + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x96 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + >; + }; + + pinctrl_usbhub: usbhubgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x41 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 9155bd4784eb..6d635ba0904c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -6,8 +6,10 @@ #include <dt-bindings/clock/imx8mq-clock.h> #include <dt-bindings/power/imx8mq-power.h> +#include <dt-bindings/reset/imx8mq-reset.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> #include "imx8mq-pinfunc.h" / { @@ -87,32 +89,48 @@ device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MQ_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + #cooling-cells = <2>; }; A53_L2: l2-cache0 { @@ -120,6 +138,24 @@ }; }; + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <900000>; + clock-latency-ns = <150000>; + }; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -132,6 +168,67 @@ method = "smc"; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 1>; + + trips { + gpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + vpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 2>; + + trips { + vpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ @@ -160,6 +257,7 @@ reg = <0x30200000 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -171,6 +269,7 @@ reg = <0x30210000 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -182,6 +281,7 @@ reg = <0x30220000 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -193,6 +293,7 @@ reg = <0x30230000 0x10000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -204,12 +305,65 @@ reg = <0x30240000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; + tmu: tmu@30260000 { + compatible = "fsl,imx8mq-tmu"; + reg = <0x30260000 0x10000>; + interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; + fsl,tmu-calibration = <0x00000000 0x00000023 + 0x00000001 0x00000029 + 0x00000002 0x0000002f + 0x00000003 0x00000035 + 0x00000004 0x0000003d + 0x00000005 0x00000043 + 0x00000006 0x0000004b + 0x00000007 0x00000051 + 0x00000008 0x00000057 + 0x00000009 0x0000005f + 0x0000000a 0x00000067 + 0x0000000b 0x0000006f + + 0x00010000 0x0000001b + 0x00010001 0x00000023 + 0x00010002 0x0000002b + 0x00010003 0x00000033 + 0x00010004 0x0000003b + 0x00010005 0x00000043 + 0x00010006 0x0000004b + 0x00010007 0x00000055 + 0x00010008 0x0000005d + 0x00010009 0x00000067 + 0x0001000a 0x00000070 + + 0x00020000 0x00000017 + 0x00020001 0x00000023 + 0x00020002 0x0000002d + 0x00020003 0x00000037 + 0x00020004 0x00000041 + 0x00020005 0x0000004b + 0x00020006 0x00000057 + 0x00020007 0x00000063 + 0x00020008 0x0000006f + + 0x00030000 0x00000015 + 0x00030001 0x00000021 + 0x00030002 0x0000002d + 0x00030003 0x00000039 + 0x00030004 0x00000045 + 0x00030005 0x00000053 + 0x00030006 0x0000005f + 0x00030007 0x00000071>; + #thermal-sensor-cells = <1>; + }; + wdog1: watchdog@30280000 { compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; @@ -234,16 +388,35 @@ status = "disabled"; }; + sdma2: sdma@302c0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; + reg = <0x302c0000 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>, + <&clk IMX8MQ_CLK_SDMA2_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + iomuxc: iomuxc@30330000 { compatible = "fsl,imx8mq-iomuxc"; reg = <0x30330000 0x10000>; }; iomuxc_gpr: syscon@30340000 { - compatible = "fsl,imx8mq-iomuxc-gpr", "syscon"; + compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; + ocotp: ocotp-ctrl@30350000 { + compatible = "fsl,imx8mq-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; + #address-cells = <1>; + #size-cells = <1>; + }; + anatop: syscon@30360000 { compatible = "fsl,imx8mq-anatop", "syscon"; reg = <0x30360000 0x10000>; @@ -278,6 +451,12 @@ "clk_ext3", "clk_ext4"; }; + src: reset-controller@30390000 { + compatible = "fsl,imx8mq-src", "syscon"; + reg = <0x30390000 0x10000>; + #reset-cells = <1>; + }; + gpc: gpc@303a0000 { compatible = "fsl,imx8mq-gpc"; reg = <0x303a0000 0x10000>; @@ -294,9 +473,25 @@ reg = <IMX8M_POWER_DOMAIN_MIPI>; }; - pgc_pcie1: power-domain@1 { + /* + * As per comment in ATF source code: + * + * PCIE1 and PCIE2 share the + * same reset signal, if we + * power down PCIE2, PCIE1 + * will be held in reset too. + * + * So instead of creating two + * separate power domains for + * PCIE1 and PCIE2 we create a + * link between both and use + * it as a shared PCIE power + * domain. + */ + pgc_pcie: power-domain@1 { #power-domain-cells = <0>; reg = <IMX8M_POWER_DOMAIN_PCIE1>; + power-domains = <&pgc_pcie2>; }; pgc_otg1: power-domain@2 { @@ -478,6 +673,21 @@ status = "disabled"; }; + sai2: sai@308b0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai", + "fsl,imx6sx-sai"; + reg = <0x308b0000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, + <&clk IMX8MQ_CLK_SAI2_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2c1: i2c@30a20000 { compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; reg = <0x30a20000 0x10000>; @@ -575,6 +785,17 @@ status = "disabled"; }; + sdma1: sdma@30bd0000 { + compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>, + <&clk IMX8MQ_CLK_AHB>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + fec1: ethernet@30be0000 { compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x30be0000 0x10000>; @@ -594,6 +815,30 @@ }; }; + gpu: gpu@38000000 { + compatible = "vivante,gc"; + reg = <0x38000000 0x40000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_GPU_ROOT>, + <&clk IMX8MQ_CLK_GPU_SHADER_DIV>, + <&clk IMX8MQ_CLK_GPU_AXI>, + <&clk IMX8MQ_CLK_GPU_AHB>; + clock-names = "core", "shader", "bus", "reg"; + assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>, + <&clk IMX8MQ_CLK_GPU_SHADER_SRC>, + <&clk IMX8MQ_CLK_GPU_AXI>, + <&clk IMX8MQ_CLK_GPU_AHB>, + <&clk IMX8MQ_GPU_PLL_BYPASS>; + assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL_OUT>, + <&clk IMX8MQ_GPU_PLL>; + assigned-clock-rates = <800000000>, <800000000>, + <800000000>, <800000000>, <0>; + power-domains = <&pgc_gpu>; + }; + usb_dwc3_0: usb@38100000 { compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; reg = <0x38100000 0x10000>; @@ -658,6 +903,66 @@ status = "disabled"; }; + + pcie0: pcie@33800000 { + compatible = "fsl,imx8mq-pcie"; + reg = <0x33800000 0x400000>, + <0x1ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */ + 0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + num-viewport = <4>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIEPHY>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + status = "disabled"; + }; + + pcie1: pcie@33c00000 { + compatible = "fsl,imx8mq-pcie"; + reg = <0x33c00000 0x400000>, + <0x27f00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000 /* downstream I/O 64KB */ + 0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + num-viewport = <4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIEPHY2>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + status = "disabled"; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 03aad66545c5..bfdada2db176 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -60,6 +60,82 @@ }; }; +&adma_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9646", "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + reset-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + max7322: gpio@68 { + compatible = "maxim,max7322"; + reg = <0x68>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + pca9557_a: gpio@1a { + compatible = "nxp,pca9557"; + reg = <0x1a>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9557_b: gpio@1d { + compatible = "nxp,pca9557"; + reg = <0x1d>; + gpio-controller; + #gpio-cells = <2>; + }; + + light-sensor@44 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isl29023>; + compatible = "isil,isl29023"; + reg = <0x44>; + interrupt-parent = <&lsio_gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; + }; + }; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -100,6 +176,25 @@ >; }; + pinctrl_ioexp_rst: ioexp_rst_grp { + fsl,pins = < + IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021 + >; + }; + + pinctrl_isl29023: isl29023grp { + fsl,pins = < + IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02 0x00000021 + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + IMX8QXP_USB_SS3_TC1_ADMA_I2C1_SCL 0x06000021 + IMX8QXP_USB_SS3_TC3_ADMA_I2C1_SDA 0x06000021 + >; + }; + pinctrl_lpuart0: lpuart0grp { fsl,pins = < IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 4c3dd95ed488..0683ee2a48ae 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -21,6 +21,7 @@ mmc1 = &usdhc2; mmc2 = &usdhc3; serial0 = &adma_lpuart0; + mu1 = &lsio_mu1; }; cpus { @@ -34,6 +35,9 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_1: cpu@1 { @@ -42,6 +46,9 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_2: cpu@2 { @@ -50,6 +57,9 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_3: cpu@3 { @@ -58,6 +68,9 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A35_L2>; + clocks = <&clk IMX_A35_CLK>; + operating-points-v2 = <&a35_opp_table>; + #cooling-cells = <2>; }; A35_L2: l2-cache0 { @@ -65,6 +78,24 @@ }; }; + a35_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + gic: interrupt-controller@51a00000 { compatible = "arm,gic-v3"; reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ @@ -87,7 +118,8 @@ scu { compatible = "fsl,imx-scu"; mbox-names = "tx0", "tx1", "tx2", "tx3", - "rx0", "rx1", "rx2", "rx3"; + "rx0", "rx1", "rx2", "rx3", + "gip3"; mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 @@ -95,7 +127,8 @@ &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 - &lsio_mu1 1 3>; + &lsio_mu1 1 3 + &lsio_mu1 3 3>; clk: clock-controller { compatible = "fsl,imx8qxp-clk"; @@ -163,6 +196,39 @@ status = "disabled"; }; + adma_lpuart1: serial@5a070000 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x5a070000 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_UART_1>; + status = "disabled"; + }; + + adma_lpuart2: serial@5a080000 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x5a080000 0x1000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_UART_2>; + status = "disabled"; + }; + + adma_lpuart3: serial@5a090000 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x5a090000 0x1000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_UART_3>; + status = "disabled"; + }; + adma_i2c0: i2c@5a800000 { compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x5a800000 0x4000>; @@ -328,7 +394,7 @@ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; reg = <0x5d1b0000 0x10000>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <0>; + #mbox-cells = <2>; status = "disabled"; }; @@ -339,11 +405,19 @@ #mbox-cells = <2>; }; + lsio_mu2: mailbox@5d1d0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1d0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + lsio_mu3: mailbox@5d1e0000 { compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; reg = <0x5d1e0000 0x10000>; interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <0>; + #mbox-cells = <2>; status = "disabled"; }; @@ -351,7 +425,7 @@ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; reg = <0x5d1f0000 0x10000>; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <0>; + #mbox-cells = <2>; status = "disabled"; }; @@ -443,4 +517,9 @@ power-domains = <&pd IMX_SC_R_GPIO_7>; }; }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 2f19e0e5b7cf..aa6a8ad31be2 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -478,6 +478,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf00000 0x0 0x1000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 2 &dma0 3>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>, <&crg_ctrl HI3660_CLK_GATE_UART1>; clock-names = "uartclk", "apb_pclk"; @@ -490,6 +492,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf03000 0x0 0x1000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 4 &dma0 5>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>, <&crg_ctrl HI3660_PCLK>; clock-names = "uartclk", "apb_pclk"; @@ -514,6 +518,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf01000 0x0 0x1000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 6 &dma0 7>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>, <&crg_ctrl HI3660_CLK_GATE_UART4>; clock-names = "uartclk", "apb_pclk"; @@ -526,6 +532,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf05000 0x0 0x1000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 8 &dma0 9>; clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>, <&crg_ctrl HI3660_CLK_GATE_UART5>; clock-names = "uartclk", "apb_pclk"; @@ -552,13 +560,23 @@ #dma-cells = <1>; dma-channels = <16>; dma-requests = <32>; - dma-min-chan = <1>; + dma-channel-mask = <0xfffe>; interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>; dma-no-cci; dma-type = "hi3660_dma"; }; + asp_dmac: dma-controller@e804b000 { + compatible = "hisilicon,hisi-pcm-asp-dma-1.0"; + reg = <0x0 0xe804b000 0x0 0x1000>; + #dma-cells = <1>; + dma-channels = <16>; + dma-requests = <32>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "asp_dma_irq"; + }; + rtc0: rtc@fff04000 { compatible = "arm,pl031", "arm,primecell"; reg = <0x0 0Xfff04000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index c9775b66629f..7dac33d4fd5c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -8,6 +8,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "hi3670.dtsi" #include "hikey970-pinctrl.dtsi" @@ -17,6 +18,8 @@ compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670"; aliases { + mshc1 = &dwmmc1; + mshc2 = &dwmmc2; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -35,6 +38,37 @@ /* expect bootloader to fill in this region */ reg = <0x0 0x0 0x0 0x0>; }; + + sd_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sd_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* GPIO_051_WIFI_EN */ + gpio = <&gpio6 3 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; }; /* @@ -354,6 +388,47 @@ "GPIO_231_HDMI_INT"; }; +&dwmmc1 { + bus-width = <0x4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + cap-sd-highspeed; + disable-wp; + cd-inverted; + cd-gpios = <&gpio25 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_func + &sd_clk_cfg_func + &sd_cfg_func>; + vmmc-supply = <&sd_3v3>; + vqmmc-supply = <&sd_1v8>; + status = "okay"; +}; + +&dwmmc2 { /* WIFI */ + bus-width = <0x4>; + non-removable; + broken-cd; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pmx_func + &sdio_clk_cfg_func + &sdio_cfg_func>; + /* WL_EN */ + vmmc-supply = <&wlan_en>; + status = "ok"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, GPIO_177_WL_WAKEUP_AP */ + interrupt-parent = <&gpio22>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + }; +}; + &uart0 { /* On High speed expansion header */ label = "HS-UART0"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 2ed06e4588b8..2dcffa3ed218 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -151,6 +151,13 @@ #clock-cells = <1>; }; + crg_rst: crg_rst_controller { + compatible = "hisilicon,hi3670-reset", + "hisilicon,hi3660-reset"; + #reset-cells = <2>; + hisi,rst-syscon = <&crg_ctrl>; + }; + pctrl: pctrl@e8a09000 { compatible = "hisilicon,hi3670-pctrl", "syscon"; reg = <0x0 0xe8a09000 0x0 0x1000>; @@ -647,5 +654,60 @@ clocks = <&sctrl HI3670_PCLK_AO_GPIO6>; clock-names = "apb_pclk"; }; + + /* UFS */ + ufs: ufs@ff3c0000 { + compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1"; + /* 0: HCI standard */ + /* 1: UFS SYS CTRL */ + reg = <0x0 0xff3c0000 0x0 0x1000>, + <0x0 0xff3e0000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>, + <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; + clock-names = "ref_clk", "phy_clk"; + freq-table-hz = <0 0>, <0 0>; + /* offset: 0x84; bit: 12 */ + resets = <&crg_rst 0x84 12>; + reset-names = "rst"; + }; + + /* SD */ + dwmmc1: dwmmc1@ff37f000 { + compatible = "hisilicon,hi3670-dw-mshc", + "hisilicon,hi3660-dw-mshc"; + reg = <0x0 0xff37f000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_SD>, + <&crg_ctrl HI3670_HCLK_GATE_SD>; + clock-names = "ciu", "biu"; + clock-frequency = <3200000>; + resets = <&crg_rst 0x94 18>; + reset-names = "reset"; + hisilicon,peripheral-syscon = <&sctrl>; + card-detect-delay = <200>; + status = "disabled"; + }; + + /* SDIO */ + dwmmc2: dwmmc2@fc183000 { + compatible = "hisilicon,hi3670-dw-mshc", + "hisilicon,hi3660-dw-mshc"; + reg = <0x0 0xfc183000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3670_CLK_GATE_SDIO>, + <&crg_ctrl HI3670_HCLK_GATE_SDIO>; + clock-names = "ciu", "biu"; + clock-frequency = <3200000>; + resets = <&crg_rst 0x94 20>; + reset-names = "reset"; + card-detect-delay = <200>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi index 67bb52d43619..d456b0aa6f58 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi @@ -196,6 +196,16 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 10 0>; + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SDIO_CLK */ + 0x004 MUX_M1 /* SDIO_CMD */ + 0x008 MUX_M1 /* SDIO_DATA0 */ + 0x00c MUX_M1 /* SDIO_DATA1 */ + 0x010 MUX_M1 /* SDIO_DATA2 */ + 0x014 MUX_M1 /* SDIO_DATA3 */ + >; + }; }; pmx6: pinmux@fc182800 { @@ -203,6 +213,52 @@ reg = <0x0 0xfc182800 0x0 0x028>; #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; + + sdio_clk_cfg_func: sdio_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SDIO_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA DRIVE6_MASK + >; + }; + + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SDIO_CMD */ + 0x008 0x0 /* SDIO_DATA0 */ + 0x00c 0x0 /* SDIO_DATA1 */ + 0x010 0x0 /* SDIO_DATA2 */ + 0x014 0x0 /* SDIO_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA DRIVE6_MASK + >; + }; }; pmx7: pinmux@ff37e000 { @@ -214,6 +270,17 @@ pinctrl-single,function-mask = <7>; /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 12 0>; + + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SD_CLK */ + 0x004 MUX_M1 /* SD_CMD */ + 0x008 MUX_M1 /* SD_DATA0 */ + 0x00c MUX_M1 /* SD_DATA1 */ + 0x010 MUX_M1 /* SD_DATA2 */ + 0x014 MUX_M1 /* SD_DATA3 */ + >; + }; }; pmx8: pinmux@ff37e800 { @@ -221,6 +288,54 @@ reg = <0x0 0xff37e800 0x0 0x030>; #pinctrl-cells = <1>; pinctrl-single,register-width = <0x20>; + + sd_clk_cfg_func: sd_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SD_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA + DRIVE6_MASK + >; + }; + + sd_cfg_func: sd_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SD_CMD */ + 0x008 0x0 /* SD_DATA0 */ + 0x00c 0x0 /* SD_DATA1 */ + 0x010 0x0 /* SD_DATA2 */ + 0x014 0x0 /* SD_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA + DRIVE6_MASK + >; + }; }; pmx1: pinmux@fff11000 { diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile new file mode 100644 index 000000000000..9606ac85ac70 --- /dev/null +++ b/arch/arm64/boot/dts/intel/Makefile @@ -0,0 +1 @@ +dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi new file mode 100644 index 000000000000..e4ceb3a73c81 --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019, Intel Corporation + */ + +/dts-v1/; +#include <dt-bindings/reset/altr,rst-mgr-s10.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "intel,socfpga-agilex"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x1>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x3>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 120 8>, + <0 121 8>, + <0 122 8>, + <0 123 8>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + interrupt-parent = <&intc>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + intc: intc@fffc1000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0xfffc1000 0x0 0x1000>, + <0x0 0xfffc2000 0x0 0x2000>, + <0x0 0xfffc4000 0x0 0x2000>, + <0x0 0xfffc6000 0x0 0x2000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + device_type = "soc"; + interrupt-parent = <&intc>; + ranges = <0 0 0 0xffffffff>; + + gmac0: ethernet@ff800000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff800000 0x2000>; + interrupts = <0 90 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; + snps,multicast-filter-bins = <256>; + iommus = <&smmu 1>; + status = "disabled"; + }; + + gmac1: ethernet@ff802000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff802000 0x2000>; + interrupts = <0 91 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; + snps,multicast-filter-bins = <256>; + iommus = <&smmu 2>; + status = "disabled"; + }; + + gmac2: ethernet@ff804000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff804000 0x2000>; + interrupts = <0 92 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; + tx-fifo-depth = <16384>; + rx-fifo-depth = <16384>; + snps,multicast-filter-bins = <256>; + iommus = <&smmu 3>; + status = "disabled"; + }; + + gpio0: gpio@ffc03200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xffc03200 0x100>; + resets = <&rst GPIO0_RESET>; + status = "disabled"; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <24>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 110 4>; + }; + }; + + gpio1: gpio@ffc03300 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xffc03300 0x100>; + resets = <&rst GPIO1_RESET>; + status = "disabled"; + + portb: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <24>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 111 4>; + }; + }; + + i2c0: i2c@ffc02800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02800 0x100>; + interrupts = <0 103 4>; + resets = <&rst I2C0_RESET>; + status = "disabled"; + }; + + i2c1: i2c@ffc02900 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02900 0x100>; + interrupts = <0 104 4>; + resets = <&rst I2C1_RESET>; + status = "disabled"; + }; + + i2c2: i2c@ffc02a00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02a00 0x100>; + interrupts = <0 105 4>; + resets = <&rst I2C2_RESET>; + status = "disabled"; + }; + + i2c3: i2c@ffc02b00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02b00 0x100>; + interrupts = <0 106 4>; + resets = <&rst I2C3_RESET>; + status = "disabled"; + }; + + i2c4: i2c@ffc02c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02c00 0x100>; + interrupts = <0 107 4>; + resets = <&rst I2C4_RESET>; + status = "disabled"; + }; + + mmc: dwmmc0@ff808000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "altr,socfpga-dw-mshc"; + reg = <0xff808000 0x1000>; + interrupts = <0 96 4>; + fifo-depth = <0x400>; + resets = <&rst SDMMC_RESET>; + reset-names = "reset"; + iommus = <&smmu 5>; + status = "disabled"; + }; + + ocram: sram@ffe00000 { + compatible = "mmio-sram"; + reg = <0xffe00000 0x40000>; + }; + + pdma: pdma@ffda0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xffda0000 0x1000>; + interrupts = <0 81 4>, + <0 82 4>, + <0 83 4>, + <0 84 4>, + <0 85 4>, + <0 86 4>, + <0 87 4>, + <0 88 4>, + <0 89 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + rst: rstmgr@ffd11000 { + #reset-cells = <1>; + compatible = "altr,stratix10-rst-mgr"; + reg = <0xffd11000 0x100>; + }; + + smmu: iommu@fa000000 { + compatible = "arm,mmu-500", "arm,smmu-v2"; + reg = <0xfa000000 0x40000>; + #global-interrupts = <2>; + #iommu-cells = <1>; + interrupt-parent = <&intc>; + interrupts = <0 128 4>, /* Global Secure Fault */ + <0 129 4>, /* Global Non-secure Fault */ + /* Non-secure Context Interrupts (32) */ + <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>, + <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>, + <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>, + <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>, + <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>, + <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>, + <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>, + <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>; + stream-match-mask = <0x7ff0>; + status = "disabled"; + }; + + spi0: spi@ffda4000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda4000 0x1000>; + interrupts = <0 99 4>; + resets = <&rst SPIM0_RESET>; + reg-io-width = <4>; + num-cs = <4>; + status = "disabled"; + }; + + spi1: spi@ffda5000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda5000 0x1000>; + interrupts = <0 100 4>; + resets = <&rst SPIM1_RESET>; + reg-io-width = <4>; + num-cs = <4>; + status = "disabled"; + }; + + sysmgr: sysmgr@ffd12000 { + compatible = "altr,sys-mgr", "syscon"; + reg = <0xffd12000 0x500>; + }; + + /* Local timer */ + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + timer0: timer0@ffc03000 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 113 4>; + reg = <0xffc03000 0x100>; + }; + + timer1: timer1@ffc03100 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 114 4>; + reg = <0xffc03100 0x100>; + }; + + timer2: timer2@ffd00000 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 115 4>; + reg = <0xffd00000 0x100>; + }; + + timer3: timer3@ffd00100 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 116 4>; + reg = <0xffd00100 0x100>; + }; + + uart0: serial0@ffc02000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02000 0x100>; + interrupts = <0 108 4>; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&rst UART0_RESET>; + status = "disabled"; + }; + + uart1: serial1@ffc02100 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02100 0x100>; + interrupts = <0 109 4>; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&rst UART1_RESET>; + status = "disabled"; + }; + + usbphy0: usbphy@0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "okay"; + }; + + usb0: usb@ffb00000 { + compatible = "snps,dwc2"; + reg = <0xffb00000 0x40000>; + interrupts = <0 93 4>; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; + reset-names = "dwc2", "dwc2-ecc"; + iommus = <&smmu 6>; + status = "disabled"; + }; + + usb1: usb@ffb40000 { + compatible = "snps,dwc2"; + reg = <0xffb40000 0x40000>; + interrupts = <0 94 4>; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; + reset-names = "dwc2", "dwc2-ecc"; + iommus = <&smmu 7>; + status = "disabled"; + }; + + watchdog0: watchdog@ffd00200 { + compatible = "snps,dw-wdt"; + reg = <0xffd00200 0x100>; + interrupts = <0 117 4>; + resets = <&rst WATCHDOG0_RESET>; + status = "disabled"; + }; + + watchdog1: watchdog@ffd00300 { + compatible = "snps,dw-wdt"; + reg = <0xffd00300 0x100>; + interrupts = <0 118 4>; + resets = <&rst WATCHDOG1_RESET>; + status = "disabled"; + }; + + watchdog2: watchdog@ffd00400 { + compatible = "snps,dw-wdt"; + reg = <0xffd00400 0x100>; + interrupts = <0 125 4>; + resets = <&rst WATCHDOG2_RESET>; + status = "disabled"; + }; + + watchdog3: watchdog@ffd00500 { + compatible = "snps,dw-wdt"; + reg = <0xffd00500 0x100>; + interrupts = <0 126 4>; + resets = <&rst WATCHDOG3_RESET>; + status = "disabled"; + }; + + sdr: sdr@f8011100 { + compatible = "altr,sdr-ctl", "syscon"; + reg = <0xf8011100 0xc0>; + }; + + qspi: spi@ff8d2000 { + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff8d2000 0x100>, + <0xff900000 0x100000>; + interrupts = <0 3 4>; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts new file mode 100644 index 000000000000..7814a9e8eb08 --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019, Intel Corporation + */ +#include "socfpga_agilex.dtsi" + +/ { + model = "SoCFPGA Agilex SoCDK"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gmac0 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + + max-frame-size = <9000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <4>; + + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <900>; /* 0ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + }; + }; +}; + +&mmc { + status = "okay"; + cap-sd-highspeed; + broken-cd; + bus-width = <4>; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 2468762283a5..9143aa13ceb1 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -226,6 +226,11 @@ marvell,function = "gpio"; }; + cp0_wlan_disable_pins: wlan-disable-pins { + marvell,pins = "mpp51"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: sdhci-pins { marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", "mpp60", "mpp61"; @@ -235,7 +240,7 @@ &cp0_pcie0 { pinctrl-names = "default"; - pinctrl-0 = <&cp0_pci0_reset_pins>; + pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>; reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -253,6 +258,12 @@ output-low; }; + wlan_disable { + gpio-hog; + gpios = <19 GPIO_ACTIVE_LOW>; + output-low; + }; + lte_disable { gpio-hog; gpios = <21 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index c3c360161c5d..15f1842f6df3 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -178,12 +178,12 @@ cpu2: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a57"; + compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; - clocks = <&infracfg CLK_INFRA_CA57SEL>, + clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster1_opp>; @@ -191,12 +191,12 @@ cpu3: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a57"; + compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; - clocks = <&infracfg CLK_INFRA_CA57SEL>, + clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster1_opp>; @@ -216,6 +216,20 @@ }; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + pmu_a72 { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu2>, <&cpu3>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci"; method = "smc"; @@ -1307,6 +1321,15 @@ "vencpll", "venc_lt_sel", "vdec_bus_clk_src"; + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_VCODECPLL>; + assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>; }; larb1: larb@16010000 { @@ -1372,6 +1395,10 @@ "venc_sel", "venc_lt_sel_src", "venc_lt_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>, + <&topckgen CLK_TOP_UNIVPLL1_D2>; }; vencltsys: clock-controller@19000000 { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h new file mode 100644 index 000000000000..6221cd712718 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h @@ -0,0 +1,1120 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 MediaTek Inc. + * Author: Zhiyong Tao <zhiyong.tao@mediatek.com> + * + */ + +#ifndef __MT8183_PINFUNC_H +#define __MT8183_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define PINMUX_GPIO0__FUNC_MRG_SYNC (MTK_PIN_NO(0) | 1) +#define PINMUX_GPIO0__FUNC_PCM0_SYNC (MTK_PIN_NO(0) | 2) +#define PINMUX_GPIO0__FUNC_TP_GPIO0_AO (MTK_PIN_NO(0) | 3) +#define PINMUX_GPIO0__FUNC_SRCLKENAI0 (MTK_PIN_NO(0) | 4) +#define PINMUX_GPIO0__FUNC_SCP_SPI2_CS (MTK_PIN_NO(0) | 5) +#define PINMUX_GPIO0__FUNC_I2S3_MCK (MTK_PIN_NO(0) | 6) +#define PINMUX_GPIO0__FUNC_SPI2_CSB (MTK_PIN_NO(0) | 7) + +#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define PINMUX_GPIO1__FUNC_MRG_CLK (MTK_PIN_NO(1) | 1) +#define PINMUX_GPIO1__FUNC_PCM0_CLK (MTK_PIN_NO(1) | 2) +#define PINMUX_GPIO1__FUNC_TP_GPIO1_AO (MTK_PIN_NO(1) | 3) +#define PINMUX_GPIO1__FUNC_CLKM3 (MTK_PIN_NO(1) | 4) +#define PINMUX_GPIO1__FUNC_SCP_SPI2_MO (MTK_PIN_NO(1) | 5) +#define PINMUX_GPIO1__FUNC_I2S3_BCK (MTK_PIN_NO(1) | 6) +#define PINMUX_GPIO1__FUNC_SPI2_MO (MTK_PIN_NO(1) | 7) + +#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define PINMUX_GPIO2__FUNC_MRG_DO (MTK_PIN_NO(2) | 1) +#define PINMUX_GPIO2__FUNC_PCM0_DO (MTK_PIN_NO(2) | 2) +#define PINMUX_GPIO2__FUNC_TP_GPIO2_AO (MTK_PIN_NO(2) | 3) +#define PINMUX_GPIO2__FUNC_SCL6 (MTK_PIN_NO(2) | 4) +#define PINMUX_GPIO2__FUNC_SCP_SPI2_CK (MTK_PIN_NO(2) | 5) +#define PINMUX_GPIO2__FUNC_I2S3_LRCK (MTK_PIN_NO(2) | 6) +#define PINMUX_GPIO2__FUNC_SPI2_CLK (MTK_PIN_NO(2) | 7) + +#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define PINMUX_GPIO3__FUNC_MRG_DI (MTK_PIN_NO(3) | 1) +#define PINMUX_GPIO3__FUNC_PCM0_DI (MTK_PIN_NO(3) | 2) +#define PINMUX_GPIO3__FUNC_TP_GPIO3_AO (MTK_PIN_NO(3) | 3) +#define PINMUX_GPIO3__FUNC_SDA6 (MTK_PIN_NO(3) | 4) +#define PINMUX_GPIO3__FUNC_TDM_MCK (MTK_PIN_NO(3) | 5) +#define PINMUX_GPIO3__FUNC_I2S3_DO (MTK_PIN_NO(3) | 6) +#define PINMUX_GPIO3__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(3) | 7) + +#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define PINMUX_GPIO4__FUNC_PWM_B (MTK_PIN_NO(4) | 1) +#define PINMUX_GPIO4__FUNC_I2S0_MCK (MTK_PIN_NO(4) | 2) +#define PINMUX_GPIO4__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(4) | 3) +#define PINMUX_GPIO4__FUNC_MD_URXD1 (MTK_PIN_NO(4) | 4) +#define PINMUX_GPIO4__FUNC_TDM_BCK (MTK_PIN_NO(4) | 5) +#define PINMUX_GPIO4__FUNC_TP_GPIO4_AO (MTK_PIN_NO(4) | 6) +#define PINMUX_GPIO4__FUNC_DAP_MD32_SWD (MTK_PIN_NO(4) | 7) + +#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define PINMUX_GPIO5__FUNC_PWM_C (MTK_PIN_NO(5) | 1) +#define PINMUX_GPIO5__FUNC_I2S0_BCK (MTK_PIN_NO(5) | 2) +#define PINMUX_GPIO5__FUNC_SSPM_URXD_AO (MTK_PIN_NO(5) | 3) +#define PINMUX_GPIO5__FUNC_MD_UTXD1 (MTK_PIN_NO(5) | 4) +#define PINMUX_GPIO5__FUNC_TDM_LRCK (MTK_PIN_NO(5) | 5) +#define PINMUX_GPIO5__FUNC_TP_GPIO5_AO (MTK_PIN_NO(5) | 6) +#define PINMUX_GPIO5__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(5) | 7) + +#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define PINMUX_GPIO6__FUNC_PWM_A (MTK_PIN_NO(6) | 1) +#define PINMUX_GPIO6__FUNC_I2S0_LRCK (MTK_PIN_NO(6) | 2) +#define PINMUX_GPIO6__FUNC_IDDIG (MTK_PIN_NO(6) | 3) +#define PINMUX_GPIO6__FUNC_MD_URXD0 (MTK_PIN_NO(6) | 4) +#define PINMUX_GPIO6__FUNC_TDM_DATA0 (MTK_PIN_NO(6) | 5) +#define PINMUX_GPIO6__FUNC_TP_GPIO6_AO (MTK_PIN_NO(6) | 6) +#define PINMUX_GPIO6__FUNC_CMFLASH (MTK_PIN_NO(6) | 7) + +#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define PINMUX_GPIO7__FUNC_SPI1_B_MI (MTK_PIN_NO(7) | 1) +#define PINMUX_GPIO7__FUNC_I2S0_DI (MTK_PIN_NO(7) | 2) +#define PINMUX_GPIO7__FUNC_USB_DRVVBUS (MTK_PIN_NO(7) | 3) +#define PINMUX_GPIO7__FUNC_MD_UTXD0 (MTK_PIN_NO(7) | 4) +#define PINMUX_GPIO7__FUNC_TDM_DATA1 (MTK_PIN_NO(7) | 5) +#define PINMUX_GPIO7__FUNC_TP_GPIO7_AO (MTK_PIN_NO(7) | 6) +#define PINMUX_GPIO7__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(7) | 7) + +#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define PINMUX_GPIO8__FUNC_SPI1_B_CSB (MTK_PIN_NO(8) | 1) +#define PINMUX_GPIO8__FUNC_ANT_SEL3 (MTK_PIN_NO(8) | 2) +#define PINMUX_GPIO8__FUNC_SCL7 (MTK_PIN_NO(8) | 3) +#define PINMUX_GPIO8__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(8) | 4) +#define PINMUX_GPIO8__FUNC_TDM_DATA2 (MTK_PIN_NO(8) | 5) +#define PINMUX_GPIO8__FUNC_MD_INT0 (MTK_PIN_NO(8) | 6) +#define PINMUX_GPIO8__FUNC_JTRSTN_SEL1 (MTK_PIN_NO(8) | 7) + +#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define PINMUX_GPIO9__FUNC_SPI1_B_MO (MTK_PIN_NO(9) | 1) +#define PINMUX_GPIO9__FUNC_ANT_SEL4 (MTK_PIN_NO(9) | 2) +#define PINMUX_GPIO9__FUNC_CMMCLK2 (MTK_PIN_NO(9) | 3) +#define PINMUX_GPIO9__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(9) | 4) +#define PINMUX_GPIO9__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(9) | 5) +#define PINMUX_GPIO9__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(9) | 6) +#define PINMUX_GPIO9__FUNC_DBG_MON_B10 (MTK_PIN_NO(9) | 7) + +#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define PINMUX_GPIO10__FUNC_SPI1_B_CLK (MTK_PIN_NO(10) | 1) +#define PINMUX_GPIO10__FUNC_ANT_SEL5 (MTK_PIN_NO(10) | 2) +#define PINMUX_GPIO10__FUNC_CMMCLK3 (MTK_PIN_NO(10) | 3) +#define PINMUX_GPIO10__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(10) | 4) +#define PINMUX_GPIO10__FUNC_TDM_DATA3 (MTK_PIN_NO(10) | 5) +#define PINMUX_GPIO10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 6) +#define PINMUX_GPIO10__FUNC_DBG_MON_B11 (MTK_PIN_NO(10) | 7) + +#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define PINMUX_GPIO11__FUNC_TP_URXD1_AO (MTK_PIN_NO(11) | 1) +#define PINMUX_GPIO11__FUNC_IDDIG (MTK_PIN_NO(11) | 2) +#define PINMUX_GPIO11__FUNC_SCL6 (MTK_PIN_NO(11) | 3) +#define PINMUX_GPIO11__FUNC_UCTS1 (MTK_PIN_NO(11) | 4) +#define PINMUX_GPIO11__FUNC_UCTS0 (MTK_PIN_NO(11) | 5) +#define PINMUX_GPIO11__FUNC_SRCLKENAI1 (MTK_PIN_NO(11) | 6) +#define PINMUX_GPIO11__FUNC_I2S5_MCK (MTK_PIN_NO(11) | 7) + +#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define PINMUX_GPIO12__FUNC_TP_UTXD1_AO (MTK_PIN_NO(12) | 1) +#define PINMUX_GPIO12__FUNC_USB_DRVVBUS (MTK_PIN_NO(12) | 2) +#define PINMUX_GPIO12__FUNC_SDA6 (MTK_PIN_NO(12) | 3) +#define PINMUX_GPIO12__FUNC_URTS1 (MTK_PIN_NO(12) | 4) +#define PINMUX_GPIO12__FUNC_URTS0 (MTK_PIN_NO(12) | 5) +#define PINMUX_GPIO12__FUNC_I2S2_DI2 (MTK_PIN_NO(12) | 6) +#define PINMUX_GPIO12__FUNC_I2S5_BCK (MTK_PIN_NO(12) | 7) + +#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define PINMUX_GPIO13__FUNC_DBPI_D0 (MTK_PIN_NO(13) | 1) +#define PINMUX_GPIO13__FUNC_SPI5_MI (MTK_PIN_NO(13) | 2) +#define PINMUX_GPIO13__FUNC_PCM0_SYNC (MTK_PIN_NO(13) | 3) +#define PINMUX_GPIO13__FUNC_MD_URXD0 (MTK_PIN_NO(13) | 4) +#define PINMUX_GPIO13__FUNC_ANT_SEL3 (MTK_PIN_NO(13) | 5) +#define PINMUX_GPIO13__FUNC_I2S0_MCK (MTK_PIN_NO(13) | 6) +#define PINMUX_GPIO13__FUNC_DBG_MON_B15 (MTK_PIN_NO(13) | 7) + +#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define PINMUX_GPIO14__FUNC_DBPI_D1 (MTK_PIN_NO(14) | 1) +#define PINMUX_GPIO14__FUNC_SPI5_CSB (MTK_PIN_NO(14) | 2) +#define PINMUX_GPIO14__FUNC_PCM0_CLK (MTK_PIN_NO(14) | 3) +#define PINMUX_GPIO14__FUNC_MD_UTXD0 (MTK_PIN_NO(14) | 4) +#define PINMUX_GPIO14__FUNC_ANT_SEL4 (MTK_PIN_NO(14) | 5) +#define PINMUX_GPIO14__FUNC_I2S0_BCK (MTK_PIN_NO(14) | 6) +#define PINMUX_GPIO14__FUNC_DBG_MON_B16 (MTK_PIN_NO(14) | 7) + +#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define PINMUX_GPIO15__FUNC_DBPI_D2 (MTK_PIN_NO(15) | 1) +#define PINMUX_GPIO15__FUNC_SPI5_MO (MTK_PIN_NO(15) | 2) +#define PINMUX_GPIO15__FUNC_PCM0_DO (MTK_PIN_NO(15) | 3) +#define PINMUX_GPIO15__FUNC_MD_URXD1 (MTK_PIN_NO(15) | 4) +#define PINMUX_GPIO15__FUNC_ANT_SEL5 (MTK_PIN_NO(15) | 5) +#define PINMUX_GPIO15__FUNC_I2S0_LRCK (MTK_PIN_NO(15) | 6) +#define PINMUX_GPIO15__FUNC_DBG_MON_B17 (MTK_PIN_NO(15) | 7) + +#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define PINMUX_GPIO16__FUNC_DBPI_D3 (MTK_PIN_NO(16) | 1) +#define PINMUX_GPIO16__FUNC_SPI5_CLK (MTK_PIN_NO(16) | 2) +#define PINMUX_GPIO16__FUNC_PCM0_DI (MTK_PIN_NO(16) | 3) +#define PINMUX_GPIO16__FUNC_MD_UTXD1 (MTK_PIN_NO(16) | 4) +#define PINMUX_GPIO16__FUNC_ANT_SEL6 (MTK_PIN_NO(16) | 5) +#define PINMUX_GPIO16__FUNC_I2S0_DI (MTK_PIN_NO(16) | 6) +#define PINMUX_GPIO16__FUNC_DBG_MON_B23 (MTK_PIN_NO(16) | 7) + +#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define PINMUX_GPIO17__FUNC_DBPI_D4 (MTK_PIN_NO(17) | 1) +#define PINMUX_GPIO17__FUNC_SPI4_MI (MTK_PIN_NO(17) | 2) +#define PINMUX_GPIO17__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(17) | 3) +#define PINMUX_GPIO17__FUNC_MD_INT0 (MTK_PIN_NO(17) | 4) +#define PINMUX_GPIO17__FUNC_ANT_SEL7 (MTK_PIN_NO(17) | 5) +#define PINMUX_GPIO17__FUNC_I2S3_MCK (MTK_PIN_NO(17) | 6) +#define PINMUX_GPIO17__FUNC_DBG_MON_A1 (MTK_PIN_NO(17) | 7) + +#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define PINMUX_GPIO18__FUNC_DBPI_D5 (MTK_PIN_NO(18) | 1) +#define PINMUX_GPIO18__FUNC_SPI4_CSB (MTK_PIN_NO(18) | 2) +#define PINMUX_GPIO18__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(18) | 3) +#define PINMUX_GPIO18__FUNC_MD_INT0 (MTK_PIN_NO(18) | 4) +#define PINMUX_GPIO18__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(18) | 5) +#define PINMUX_GPIO18__FUNC_I2S3_BCK (MTK_PIN_NO(18) | 6) +#define PINMUX_GPIO18__FUNC_DBG_MON_A2 (MTK_PIN_NO(18) | 7) + +#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define PINMUX_GPIO19__FUNC_DBPI_D6 (MTK_PIN_NO(19) | 1) +#define PINMUX_GPIO19__FUNC_SPI4_MO (MTK_PIN_NO(19) | 2) +#define PINMUX_GPIO19__FUNC_CONN_MCU_TDO (MTK_PIN_NO(19) | 3) +#define PINMUX_GPIO19__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(19) | 4) +#define PINMUX_GPIO19__FUNC_URXD1 (MTK_PIN_NO(19) | 5) +#define PINMUX_GPIO19__FUNC_I2S3_LRCK (MTK_PIN_NO(19) | 6) +#define PINMUX_GPIO19__FUNC_DBG_MON_A3 (MTK_PIN_NO(19) | 7) + +#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define PINMUX_GPIO20__FUNC_DBPI_D7 (MTK_PIN_NO(20) | 1) +#define PINMUX_GPIO20__FUNC_SPI4_CLK (MTK_PIN_NO(20) | 2) +#define PINMUX_GPIO20__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(20) | 3) +#define PINMUX_GPIO20__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(20) | 4) +#define PINMUX_GPIO20__FUNC_UTXD1 (MTK_PIN_NO(20) | 5) +#define PINMUX_GPIO20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 6) +#define PINMUX_GPIO20__FUNC_DBG_MON_A19 (MTK_PIN_NO(20) | 7) + +#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define PINMUX_GPIO21__FUNC_DBPI_D8 (MTK_PIN_NO(21) | 1) +#define PINMUX_GPIO21__FUNC_SPI3_MI (MTK_PIN_NO(21) | 2) +#define PINMUX_GPIO21__FUNC_CONN_MCU_TMS (MTK_PIN_NO(21) | 3) +#define PINMUX_GPIO21__FUNC_DAP_MD32_SWD (MTK_PIN_NO(21) | 4) +#define PINMUX_GPIO21__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(21) | 5) +#define PINMUX_GPIO21__FUNC_I2S2_MCK (MTK_PIN_NO(21) | 6) +#define PINMUX_GPIO21__FUNC_DBG_MON_B5 (MTK_PIN_NO(21) | 7) + +#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define PINMUX_GPIO22__FUNC_DBPI_D9 (MTK_PIN_NO(22) | 1) +#define PINMUX_GPIO22__FUNC_SPI3_CSB (MTK_PIN_NO(22) | 2) +#define PINMUX_GPIO22__FUNC_CONN_MCU_TCK (MTK_PIN_NO(22) | 3) +#define PINMUX_GPIO22__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(22) | 4) +#define PINMUX_GPIO22__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(22) | 5) +#define PINMUX_GPIO22__FUNC_I2S2_BCK (MTK_PIN_NO(22) | 6) +#define PINMUX_GPIO22__FUNC_DBG_MON_B6 (MTK_PIN_NO(22) | 7) + +#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define PINMUX_GPIO23__FUNC_DBPI_D10 (MTK_PIN_NO(23) | 1) +#define PINMUX_GPIO23__FUNC_SPI3_MO (MTK_PIN_NO(23) | 2) +#define PINMUX_GPIO23__FUNC_CONN_MCU_TDI (MTK_PIN_NO(23) | 3) +#define PINMUX_GPIO23__FUNC_UCTS1 (MTK_PIN_NO(23) | 4) +#define PINMUX_GPIO23__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5) +#define PINMUX_GPIO23__FUNC_I2S2_LRCK (MTK_PIN_NO(23) | 6) +#define PINMUX_GPIO23__FUNC_DBG_MON_B7 (MTK_PIN_NO(23) | 7) + +#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define PINMUX_GPIO24__FUNC_DBPI_D11 (MTK_PIN_NO(24) | 1) +#define PINMUX_GPIO24__FUNC_SPI3_CLK (MTK_PIN_NO(24) | 2) +#define PINMUX_GPIO24__FUNC_SRCLKENAI0 (MTK_PIN_NO(24) | 3) +#define PINMUX_GPIO24__FUNC_URTS1 (MTK_PIN_NO(24) | 4) +#define PINMUX_GPIO24__FUNC_IO_JTAG_TCK (MTK_PIN_NO(24) | 5) +#define PINMUX_GPIO24__FUNC_I2S2_DI (MTK_PIN_NO(24) | 6) +#define PINMUX_GPIO24__FUNC_DBG_MON_B31 (MTK_PIN_NO(24) | 7) + +#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define PINMUX_GPIO25__FUNC_DBPI_HSYNC (MTK_PIN_NO(25) | 1) +#define PINMUX_GPIO25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 2) +#define PINMUX_GPIO25__FUNC_SCL6 (MTK_PIN_NO(25) | 3) +#define PINMUX_GPIO25__FUNC_KPCOL2 (MTK_PIN_NO(25) | 4) +#define PINMUX_GPIO25__FUNC_IO_JTAG_TMS (MTK_PIN_NO(25) | 5) +#define PINMUX_GPIO25__FUNC_I2S1_MCK (MTK_PIN_NO(25) | 6) +#define PINMUX_GPIO25__FUNC_DBG_MON_B0 (MTK_PIN_NO(25) | 7) + +#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define PINMUX_GPIO26__FUNC_DBPI_VSYNC (MTK_PIN_NO(26) | 1) +#define PINMUX_GPIO26__FUNC_ANT_SEL1 (MTK_PIN_NO(26) | 2) +#define PINMUX_GPIO26__FUNC_SDA6 (MTK_PIN_NO(26) | 3) +#define PINMUX_GPIO26__FUNC_KPROW2 (MTK_PIN_NO(26) | 4) +#define PINMUX_GPIO26__FUNC_IO_JTAG_TDI (MTK_PIN_NO(26) | 5) +#define PINMUX_GPIO26__FUNC_I2S1_BCK (MTK_PIN_NO(26) | 6) +#define PINMUX_GPIO26__FUNC_DBG_MON_B1 (MTK_PIN_NO(26) | 7) + +#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define PINMUX_GPIO27__FUNC_DBPI_DE (MTK_PIN_NO(27) | 1) +#define PINMUX_GPIO27__FUNC_ANT_SEL2 (MTK_PIN_NO(27) | 2) +#define PINMUX_GPIO27__FUNC_SCL7 (MTK_PIN_NO(27) | 3) +#define PINMUX_GPIO27__FUNC_DMIC_CLK (MTK_PIN_NO(27) | 4) +#define PINMUX_GPIO27__FUNC_IO_JTAG_TDO (MTK_PIN_NO(27) | 5) +#define PINMUX_GPIO27__FUNC_I2S1_LRCK (MTK_PIN_NO(27) | 6) +#define PINMUX_GPIO27__FUNC_DBG_MON_B9 (MTK_PIN_NO(27) | 7) + +#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define PINMUX_GPIO28__FUNC_DBPI_CK (MTK_PIN_NO(28) | 1) +#define PINMUX_GPIO28__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(28) | 2) +#define PINMUX_GPIO28__FUNC_SDA7 (MTK_PIN_NO(28) | 3) +#define PINMUX_GPIO28__FUNC_DMIC_DAT (MTK_PIN_NO(28) | 4) +#define PINMUX_GPIO28__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(28) | 5) +#define PINMUX_GPIO28__FUNC_I2S1_DO (MTK_PIN_NO(28) | 6) +#define PINMUX_GPIO28__FUNC_DBG_MON_B32 (MTK_PIN_NO(28) | 7) + +#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define PINMUX_GPIO29__FUNC_MSDC1_CLK (MTK_PIN_NO(29) | 1) +#define PINMUX_GPIO29__FUNC_IO_JTAG_TCK (MTK_PIN_NO(29) | 2) +#define PINMUX_GPIO29__FUNC_UDI_TCK (MTK_PIN_NO(29) | 3) +#define PINMUX_GPIO29__FUNC_CONN_DSP_JCK (MTK_PIN_NO(29) | 4) +#define PINMUX_GPIO29__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(29) | 5) +#define PINMUX_GPIO29__FUNC_PCM1_CLK (MTK_PIN_NO(29) | 6) +#define PINMUX_GPIO29__FUNC_DBG_MON_A6 (MTK_PIN_NO(29) | 7) + +#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define PINMUX_GPIO30__FUNC_MSDC1_DAT3 (MTK_PIN_NO(30) | 1) +#define PINMUX_GPIO30__FUNC_DAP_MD32_SWD (MTK_PIN_NO(30) | 2) +#define PINMUX_GPIO30__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(30) | 3) +#define PINMUX_GPIO30__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(30) | 4) +#define PINMUX_GPIO30__FUNC_SSPM_JTAG_TRSTN (MTK_PIN_NO(30) | 5) +#define PINMUX_GPIO30__FUNC_PCM1_DI (MTK_PIN_NO(30) | 6) +#define PINMUX_GPIO30__FUNC_DBG_MON_A7 (MTK_PIN_NO(30) | 7) + +#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define PINMUX_GPIO31__FUNC_MSDC1_CMD (MTK_PIN_NO(31) | 1) +#define PINMUX_GPIO31__FUNC_IO_JTAG_TMS (MTK_PIN_NO(31) | 2) +#define PINMUX_GPIO31__FUNC_UDI_TMS (MTK_PIN_NO(31) | 3) +#define PINMUX_GPIO31__FUNC_CONN_DSP_JMS (MTK_PIN_NO(31) | 4) +#define PINMUX_GPIO31__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(31) | 5) +#define PINMUX_GPIO31__FUNC_PCM1_SYNC (MTK_PIN_NO(31) | 6) +#define PINMUX_GPIO31__FUNC_DBG_MON_A8 (MTK_PIN_NO(31) | 7) + +#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define PINMUX_GPIO32__FUNC_MSDC1_DAT0 (MTK_PIN_NO(32) | 1) +#define PINMUX_GPIO32__FUNC_IO_JTAG_TDI (MTK_PIN_NO(32) | 2) +#define PINMUX_GPIO32__FUNC_UDI_TDI (MTK_PIN_NO(32) | 3) +#define PINMUX_GPIO32__FUNC_CONN_DSP_JDI (MTK_PIN_NO(32) | 4) +#define PINMUX_GPIO32__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(32) | 5) +#define PINMUX_GPIO32__FUNC_PCM1_DO0 (MTK_PIN_NO(32) | 6) +#define PINMUX_GPIO32__FUNC_DBG_MON_A9 (MTK_PIN_NO(32) | 7) + +#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define PINMUX_GPIO33__FUNC_MSDC1_DAT2 (MTK_PIN_NO(33) | 1) +#define PINMUX_GPIO33__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(33) | 2) +#define PINMUX_GPIO33__FUNC_UDI_NTRST (MTK_PIN_NO(33) | 3) +#define PINMUX_GPIO33__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(33) | 4) +#define PINMUX_GPIO33__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(33) | 5) +#define PINMUX_GPIO33__FUNC_PCM1_DO2 (MTK_PIN_NO(33) | 6) +#define PINMUX_GPIO33__FUNC_DBG_MON_A10 (MTK_PIN_NO(33) | 7) + +#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define PINMUX_GPIO34__FUNC_MSDC1_DAT1 (MTK_PIN_NO(34) | 1) +#define PINMUX_GPIO34__FUNC_IO_JTAG_TDO (MTK_PIN_NO(34) | 2) +#define PINMUX_GPIO34__FUNC_UDI_TDO (MTK_PIN_NO(34) | 3) +#define PINMUX_GPIO34__FUNC_CONN_DSP_JDO (MTK_PIN_NO(34) | 4) +#define PINMUX_GPIO34__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(34) | 5) +#define PINMUX_GPIO34__FUNC_PCM1_DO1 (MTK_PIN_NO(34) | 6) +#define PINMUX_GPIO34__FUNC_DBG_MON_A11 (MTK_PIN_NO(34) | 7) + +#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define PINMUX_GPIO35__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(35) | 1) +#define PINMUX_GPIO35__FUNC_CCU_JTAG_TDO (MTK_PIN_NO(35) | 2) +#define PINMUX_GPIO35__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(35) | 3) +#define PINMUX_GPIO35__FUNC_SCP_JTAG_TDO (MTK_PIN_NO(35) | 5) +#define PINMUX_GPIO35__FUNC_CONN_DSP_JMS (MTK_PIN_NO(35) | 6) +#define PINMUX_GPIO35__FUNC_DBG_MON_A28 (MTK_PIN_NO(35) | 7) + +#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define PINMUX_GPIO36__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(36) | 1) +#define PINMUX_GPIO36__FUNC_CCU_JTAG_TMS (MTK_PIN_NO(36) | 2) +#define PINMUX_GPIO36__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(36) | 3) +#define PINMUX_GPIO36__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(36) | 4) +#define PINMUX_GPIO36__FUNC_SCP_JTAG_TMS (MTK_PIN_NO(36) | 5) +#define PINMUX_GPIO36__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(36) | 6) +#define PINMUX_GPIO36__FUNC_DBG_MON_A29 (MTK_PIN_NO(36) | 7) + +#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define PINMUX_GPIO37__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(37) | 1) +#define PINMUX_GPIO37__FUNC_CCU_JTAG_TDI (MTK_PIN_NO(37) | 2) +#define PINMUX_GPIO37__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(37) | 3) +#define PINMUX_GPIO37__FUNC_SCP_JTAG_TDI (MTK_PIN_NO(37) | 5) +#define PINMUX_GPIO37__FUNC_CONN_DSP_JDO (MTK_PIN_NO(37) | 6) +#define PINMUX_GPIO37__FUNC_DBG_MON_A30 (MTK_PIN_NO(37) | 7) + +#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define PINMUX_GPIO38__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(38) | 1) +#define PINMUX_GPIO38__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(38) | 3) +#define PINMUX_GPIO38__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(38) | 4) +#define PINMUX_GPIO38__FUNC_DBG_MON_A20 (MTK_PIN_NO(38) | 7) + +#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define PINMUX_GPIO39__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(39) | 1) +#define PINMUX_GPIO39__FUNC_CCU_JTAG_TCK (MTK_PIN_NO(39) | 2) +#define PINMUX_GPIO39__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(39) | 3) +#define PINMUX_GPIO39__FUNC_SCP_JTAG_TCK (MTK_PIN_NO(39) | 5) +#define PINMUX_GPIO39__FUNC_CONN_DSP_JCK (MTK_PIN_NO(39) | 6) +#define PINMUX_GPIO39__FUNC_DBG_MON_A31 (MTK_PIN_NO(39) | 7) + +#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define PINMUX_GPIO40__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(40) | 1) +#define PINMUX_GPIO40__FUNC_CCU_JTAG_TRST (MTK_PIN_NO(40) | 2) +#define PINMUX_GPIO40__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(40) | 3) +#define PINMUX_GPIO40__FUNC_SCP_JTAG_TRSTN (MTK_PIN_NO(40) | 5) +#define PINMUX_GPIO40__FUNC_CONN_DSP_JDI (MTK_PIN_NO(40) | 6) +#define PINMUX_GPIO40__FUNC_DBG_MON_A32 (MTK_PIN_NO(40) | 7) + +#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define PINMUX_GPIO41__FUNC_IDDIG (MTK_PIN_NO(41) | 1) +#define PINMUX_GPIO41__FUNC_URXD1 (MTK_PIN_NO(41) | 2) +#define PINMUX_GPIO41__FUNC_UCTS0 (MTK_PIN_NO(41) | 3) +#define PINMUX_GPIO41__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(41) | 4) +#define PINMUX_GPIO41__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 5) +#define PINMUX_GPIO41__FUNC_DMIC_CLK (MTK_PIN_NO(41) | 6) + +#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define PINMUX_GPIO42__FUNC_USB_DRVVBUS (MTK_PIN_NO(42) | 1) +#define PINMUX_GPIO42__FUNC_UTXD1 (MTK_PIN_NO(42) | 2) +#define PINMUX_GPIO42__FUNC_URTS0 (MTK_PIN_NO(42) | 3) +#define PINMUX_GPIO42__FUNC_SSPM_URXD_AO (MTK_PIN_NO(42) | 4) +#define PINMUX_GPIO42__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(42) | 5) +#define PINMUX_GPIO42__FUNC_DMIC_DAT (MTK_PIN_NO(42) | 6) + +#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define PINMUX_GPIO43__FUNC_DISP_PWM (MTK_PIN_NO(43) | 1) + +#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define PINMUX_GPIO44__FUNC_DSI_TE (MTK_PIN_NO(44) | 1) + +#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define PINMUX_GPIO45__FUNC_LCM_RST (MTK_PIN_NO(45) | 1) + +#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define PINMUX_GPIO46__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(46) | 1) +#define PINMUX_GPIO46__FUNC_URXD1 (MTK_PIN_NO(46) | 2) +#define PINMUX_GPIO46__FUNC_UCTS1 (MTK_PIN_NO(46) | 3) +#define PINMUX_GPIO46__FUNC_CCU_UTXD_AO (MTK_PIN_NO(46) | 4) +#define PINMUX_GPIO46__FUNC_TP_UCTS1_AO (MTK_PIN_NO(46) | 5) +#define PINMUX_GPIO46__FUNC_IDDIG (MTK_PIN_NO(46) | 6) +#define PINMUX_GPIO46__FUNC_I2S5_LRCK (MTK_PIN_NO(46) | 7) + +#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define PINMUX_GPIO47__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(47) | 1) +#define PINMUX_GPIO47__FUNC_UTXD1 (MTK_PIN_NO(47) | 2) +#define PINMUX_GPIO47__FUNC_URTS1 (MTK_PIN_NO(47) | 3) +#define PINMUX_GPIO47__FUNC_CCU_URXD_AO (MTK_PIN_NO(47) | 4) +#define PINMUX_GPIO47__FUNC_TP_URTS1_AO (MTK_PIN_NO(47) | 5) +#define PINMUX_GPIO47__FUNC_USB_DRVVBUS (MTK_PIN_NO(47) | 6) +#define PINMUX_GPIO47__FUNC_I2S5_DO (MTK_PIN_NO(47) | 7) + +#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define PINMUX_GPIO48__FUNC_SCL5 (MTK_PIN_NO(48) | 1) + +#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define PINMUX_GPIO49__FUNC_SDA5 (MTK_PIN_NO(49) | 1) + +#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define PINMUX_GPIO50__FUNC_SCL3 (MTK_PIN_NO(50) | 1) + +#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define PINMUX_GPIO51__FUNC_SDA3 (MTK_PIN_NO(51) | 1) + +#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define PINMUX_GPIO52__FUNC_BPI_ANT2 (MTK_PIN_NO(52) | 1) + +#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define PINMUX_GPIO53__FUNC_BPI_ANT0 (MTK_PIN_NO(53) | 1) + +#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define PINMUX_GPIO54__FUNC_BPI_OLAT1 (MTK_PIN_NO(54) | 1) + +#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define PINMUX_GPIO55__FUNC_BPI_BUS8 (MTK_PIN_NO(55) | 1) + +#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define PINMUX_GPIO56__FUNC_BPI_BUS9 (MTK_PIN_NO(56) | 1) +#define PINMUX_GPIO56__FUNC_SCL_6306 (MTK_PIN_NO(56) | 2) + +#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define PINMUX_GPIO57__FUNC_BPI_BUS10 (MTK_PIN_NO(57) | 1) +#define PINMUX_GPIO57__FUNC_SDA_6306 (MTK_PIN_NO(57) | 2) + +#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define PINMUX_GPIO58__FUNC_RFIC0_BSI_D2 (MTK_PIN_NO(58) | 1) +#define PINMUX_GPIO58__FUNC_SPM_BSI_D2 (MTK_PIN_NO(58) | 2) +#define PINMUX_GPIO58__FUNC_PWM_B (MTK_PIN_NO(58) | 3) + +#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define PINMUX_GPIO59__FUNC_RFIC0_BSI_D1 (MTK_PIN_NO(59) | 1) +#define PINMUX_GPIO59__FUNC_SPM_BSI_D1 (MTK_PIN_NO(59) | 2) + +#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define PINMUX_GPIO60__FUNC_RFIC0_BSI_D0 (MTK_PIN_NO(60) | 1) +#define PINMUX_GPIO60__FUNC_SPM_BSI_D0 (MTK_PIN_NO(60) | 2) + +#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define PINMUX_GPIO61__FUNC_MIPI1_SDATA (MTK_PIN_NO(61) | 1) + +#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define PINMUX_GPIO62__FUNC_MIPI1_SCLK (MTK_PIN_NO(62) | 1) + +#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define PINMUX_GPIO63__FUNC_MIPI0_SDATA (MTK_PIN_NO(63) | 1) + +#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define PINMUX_GPIO64__FUNC_MIPI0_SCLK (MTK_PIN_NO(64) | 1) + +#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define PINMUX_GPIO65__FUNC_MIPI3_SDATA (MTK_PIN_NO(65) | 1) +#define PINMUX_GPIO65__FUNC_BPI_OLAT2 (MTK_PIN_NO(65) | 2) + +#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define PINMUX_GPIO66__FUNC_MIPI3_SCLK (MTK_PIN_NO(66) | 1) +#define PINMUX_GPIO66__FUNC_BPI_OLAT3 (MTK_PIN_NO(66) | 2) + +#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define PINMUX_GPIO67__FUNC_MIPI2_SDATA (MTK_PIN_NO(67) | 1) + +#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define PINMUX_GPIO68__FUNC_MIPI2_SCLK (MTK_PIN_NO(68) | 1) + +#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define PINMUX_GPIO69__FUNC_BPI_BUS7 (MTK_PIN_NO(69) | 1) + +#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) +#define PINMUX_GPIO70__FUNC_BPI_BUS6 (MTK_PIN_NO(70) | 1) + +#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define PINMUX_GPIO71__FUNC_BPI_BUS5 (MTK_PIN_NO(71) | 1) + +#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define PINMUX_GPIO72__FUNC_BPI_BUS4 (MTK_PIN_NO(72) | 1) + +#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define PINMUX_GPIO73__FUNC_BPI_BUS3 (MTK_PIN_NO(73) | 1) + +#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define PINMUX_GPIO74__FUNC_BPI_BUS2 (MTK_PIN_NO(74) | 1) + +#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define PINMUX_GPIO75__FUNC_BPI_BUS1 (MTK_PIN_NO(75) | 1) + +#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define PINMUX_GPIO76__FUNC_BPI_BUS0 (MTK_PIN_NO(76) | 1) + +#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define PINMUX_GPIO77__FUNC_BPI_ANT1 (MTK_PIN_NO(77) | 1) + +#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define PINMUX_GPIO78__FUNC_BPI_OLAT0 (MTK_PIN_NO(78) | 1) + +#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define PINMUX_GPIO79__FUNC_BPI_PA_VM1 (MTK_PIN_NO(79) | 1) +#define PINMUX_GPIO79__FUNC_MIPI4_SDATA (MTK_PIN_NO(79) | 2) + +#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define PINMUX_GPIO80__FUNC_BPI_PA_VM0 (MTK_PIN_NO(80) | 1) +#define PINMUX_GPIO80__FUNC_MIPI4_SCLK (MTK_PIN_NO(80) | 2) + +#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define PINMUX_GPIO81__FUNC_SDA1 (MTK_PIN_NO(81) | 1) + +#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define PINMUX_GPIO82__FUNC_SDA0 (MTK_PIN_NO(82) | 1) + +#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define PINMUX_GPIO83__FUNC_SCL0 (MTK_PIN_NO(83) | 1) + +#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define PINMUX_GPIO84__FUNC_SCL1 (MTK_PIN_NO(84) | 1) + +#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) +#define PINMUX_GPIO85__FUNC_SPI0_MI (MTK_PIN_NO(85) | 1) +#define PINMUX_GPIO85__FUNC_SCP_SPI0_MI (MTK_PIN_NO(85) | 2) +#define PINMUX_GPIO85__FUNC_CLKM3 (MTK_PIN_NO(85) | 3) +#define PINMUX_GPIO85__FUNC_I2S1_BCK (MTK_PIN_NO(85) | 4) +#define PINMUX_GPIO85__FUNC_MFG_DFD_JTAG_TDO (MTK_PIN_NO(85) | 5) +#define PINMUX_GPIO85__FUNC_DFD_TDO (MTK_PIN_NO(85) | 6) +#define PINMUX_GPIO85__FUNC_JTDO_SEL1 (MTK_PIN_NO(85) | 7) + +#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) +#define PINMUX_GPIO86__FUNC_SPI0_CSB (MTK_PIN_NO(86) | 1) +#define PINMUX_GPIO86__FUNC_SCP_SPI0_CS (MTK_PIN_NO(86) | 2) +#define PINMUX_GPIO86__FUNC_CLKM0 (MTK_PIN_NO(86) | 3) +#define PINMUX_GPIO86__FUNC_I2S1_LRCK (MTK_PIN_NO(86) | 4) +#define PINMUX_GPIO86__FUNC_MFG_DFD_JTAG_TMS (MTK_PIN_NO(86) | 5) +#define PINMUX_GPIO86__FUNC_DFD_TMS (MTK_PIN_NO(86) | 6) +#define PINMUX_GPIO86__FUNC_JTMS_SEL1 (MTK_PIN_NO(86) | 7) + +#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) +#define PINMUX_GPIO87__FUNC_SPI0_MO (MTK_PIN_NO(87) | 1) +#define PINMUX_GPIO87__FUNC_SCP_SPI0_MO (MTK_PIN_NO(87) | 2) +#define PINMUX_GPIO87__FUNC_SDA1 (MTK_PIN_NO(87) | 3) +#define PINMUX_GPIO87__FUNC_I2S1_DO (MTK_PIN_NO(87) | 4) +#define PINMUX_GPIO87__FUNC_MFG_DFD_JTAG_TDI (MTK_PIN_NO(87) | 5) +#define PINMUX_GPIO87__FUNC_DFD_TDI (MTK_PIN_NO(87) | 6) +#define PINMUX_GPIO87__FUNC_JTDI_SEL1 (MTK_PIN_NO(87) | 7) + +#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) +#define PINMUX_GPIO88__FUNC_SPI0_CLK (MTK_PIN_NO(88) | 1) +#define PINMUX_GPIO88__FUNC_SCP_SPI0_CK (MTK_PIN_NO(88) | 2) +#define PINMUX_GPIO88__FUNC_SCL1 (MTK_PIN_NO(88) | 3) +#define PINMUX_GPIO88__FUNC_I2S1_MCK (MTK_PIN_NO(88) | 4) +#define PINMUX_GPIO88__FUNC_MFG_DFD_JTAG_TCK (MTK_PIN_NO(88) | 5) +#define PINMUX_GPIO88__FUNC_DFD_TCK_XI (MTK_PIN_NO(88) | 6) +#define PINMUX_GPIO88__FUNC_JTCK_SEL1 (MTK_PIN_NO(88) | 7) + +#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) +#define PINMUX_GPIO89__FUNC_SRCLKENAI0 (MTK_PIN_NO(89) | 1) +#define PINMUX_GPIO89__FUNC_PWM_C (MTK_PIN_NO(89) | 2) +#define PINMUX_GPIO89__FUNC_I2S5_BCK (MTK_PIN_NO(89) | 3) +#define PINMUX_GPIO89__FUNC_ANT_SEL6 (MTK_PIN_NO(89) | 4) +#define PINMUX_GPIO89__FUNC_SDA8 (MTK_PIN_NO(89) | 5) +#define PINMUX_GPIO89__FUNC_CMVREF0 (MTK_PIN_NO(89) | 6) +#define PINMUX_GPIO89__FUNC_DBG_MON_A21 (MTK_PIN_NO(89) | 7) + +#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) +#define PINMUX_GPIO90__FUNC_PWM_A (MTK_PIN_NO(90) | 1) +#define PINMUX_GPIO90__FUNC_CMMCLK2 (MTK_PIN_NO(90) | 2) +#define PINMUX_GPIO90__FUNC_I2S5_LRCK (MTK_PIN_NO(90) | 3) +#define PINMUX_GPIO90__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(90) | 4) +#define PINMUX_GPIO90__FUNC_SCL8 (MTK_PIN_NO(90) | 5) +#define PINMUX_GPIO90__FUNC_PTA_RXD (MTK_PIN_NO(90) | 6) +#define PINMUX_GPIO90__FUNC_DBG_MON_A22 (MTK_PIN_NO(90) | 7) + +#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) +#define PINMUX_GPIO91__FUNC_KPROW1 (MTK_PIN_NO(91) | 1) +#define PINMUX_GPIO91__FUNC_PWM_B (MTK_PIN_NO(91) | 2) +#define PINMUX_GPIO91__FUNC_I2S5_DO (MTK_PIN_NO(91) | 3) +#define PINMUX_GPIO91__FUNC_ANT_SEL7 (MTK_PIN_NO(91) | 4) +#define PINMUX_GPIO91__FUNC_CMMCLK3 (MTK_PIN_NO(91) | 5) +#define PINMUX_GPIO91__FUNC_PTA_TXD (MTK_PIN_NO(91) | 6) + +#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) +#define PINMUX_GPIO92__FUNC_KPROW0 (MTK_PIN_NO(92) | 1) + +#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) +#define PINMUX_GPIO93__FUNC_KPCOL0 (MTK_PIN_NO(93) | 1) +#define PINMUX_GPIO93__FUNC_DBG_MON_B27 (MTK_PIN_NO(93) | 7) + +#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) +#define PINMUX_GPIO94__FUNC_KPCOL1 (MTK_PIN_NO(94) | 1) +#define PINMUX_GPIO94__FUNC_I2S2_DI2 (MTK_PIN_NO(94) | 2) +#define PINMUX_GPIO94__FUNC_I2S5_MCK (MTK_PIN_NO(94) | 3) +#define PINMUX_GPIO94__FUNC_CMMCLK2 (MTK_PIN_NO(94) | 4) +#define PINMUX_GPIO94__FUNC_SCP_SPI2_MI (MTK_PIN_NO(94) | 5) +#define PINMUX_GPIO94__FUNC_SRCLKENAI1 (MTK_PIN_NO(94) | 6) +#define PINMUX_GPIO94__FUNC_SPI2_MI (MTK_PIN_NO(94) | 7) + +#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) +#define PINMUX_GPIO95__FUNC_URXD0 (MTK_PIN_NO(95) | 1) +#define PINMUX_GPIO95__FUNC_UTXD0 (MTK_PIN_NO(95) | 2) +#define PINMUX_GPIO95__FUNC_MD_URXD0 (MTK_PIN_NO(95) | 3) +#define PINMUX_GPIO95__FUNC_MD_URXD1 (MTK_PIN_NO(95) | 4) +#define PINMUX_GPIO95__FUNC_SSPM_URXD_AO (MTK_PIN_NO(95) | 5) +#define PINMUX_GPIO95__FUNC_CCU_URXD_AO (MTK_PIN_NO(95) | 6) + +#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) +#define PINMUX_GPIO96__FUNC_UTXD0 (MTK_PIN_NO(96) | 1) +#define PINMUX_GPIO96__FUNC_URXD0 (MTK_PIN_NO(96) | 2) +#define PINMUX_GPIO96__FUNC_MD_UTXD0 (MTK_PIN_NO(96) | 3) +#define PINMUX_GPIO96__FUNC_MD_UTXD1 (MTK_PIN_NO(96) | 4) +#define PINMUX_GPIO96__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(96) | 5) +#define PINMUX_GPIO96__FUNC_CCU_UTXD_AO (MTK_PIN_NO(96) | 6) +#define PINMUX_GPIO96__FUNC_DBG_MON_B2 (MTK_PIN_NO(96) | 7) + +#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) +#define PINMUX_GPIO97__FUNC_UCTS0 (MTK_PIN_NO(97) | 1) +#define PINMUX_GPIO97__FUNC_I2S2_MCK (MTK_PIN_NO(97) | 2) +#define PINMUX_GPIO97__FUNC_IDDIG (MTK_PIN_NO(97) | 3) +#define PINMUX_GPIO97__FUNC_CONN_MCU_TDO (MTK_PIN_NO(97) | 4) +#define PINMUX_GPIO97__FUNC_SSPM_JTAG_TDO (MTK_PIN_NO(97) | 5) +#define PINMUX_GPIO97__FUNC_IO_JTAG_TDO (MTK_PIN_NO(97) | 6) +#define PINMUX_GPIO97__FUNC_DBG_MON_B3 (MTK_PIN_NO(97) | 7) + +#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) +#define PINMUX_GPIO98__FUNC_URTS0 (MTK_PIN_NO(98) | 1) +#define PINMUX_GPIO98__FUNC_I2S2_BCK (MTK_PIN_NO(98) | 2) +#define PINMUX_GPIO98__FUNC_USB_DRVVBUS (MTK_PIN_NO(98) | 3) +#define PINMUX_GPIO98__FUNC_CONN_MCU_TMS (MTK_PIN_NO(98) | 4) +#define PINMUX_GPIO98__FUNC_SSPM_JTAG_TMS (MTK_PIN_NO(98) | 5) +#define PINMUX_GPIO98__FUNC_IO_JTAG_TMS (MTK_PIN_NO(98) | 6) +#define PINMUX_GPIO98__FUNC_DBG_MON_B4 (MTK_PIN_NO(98) | 7) + +#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) +#define PINMUX_GPIO99__FUNC_CMMCLK0 (MTK_PIN_NO(99) | 1) +#define PINMUX_GPIO99__FUNC_CONN_MCU_AICE_TMSC (MTK_PIN_NO(99) | 4) +#define PINMUX_GPIO99__FUNC_DBG_MON_B28 (MTK_PIN_NO(99) | 7) + +#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define PINMUX_GPIO100__FUNC_CMMCLK1 (MTK_PIN_NO(100) | 1) +#define PINMUX_GPIO100__FUNC_PWM_C (MTK_PIN_NO(100) | 2) +#define PINMUX_GPIO100__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(100) | 3) +#define PINMUX_GPIO100__FUNC_CONN_MCU_AICE_TCKC (MTK_PIN_NO(100) | 4) +#define PINMUX_GPIO100__FUNC_DBG_MON_B29 (MTK_PIN_NO(100) | 7) + +#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define PINMUX_GPIO101__FUNC_CLKM2 (MTK_PIN_NO(101) | 1) +#define PINMUX_GPIO101__FUNC_I2S2_LRCK (MTK_PIN_NO(101) | 2) +#define PINMUX_GPIO101__FUNC_CMVREF1 (MTK_PIN_NO(101) | 3) +#define PINMUX_GPIO101__FUNC_CONN_MCU_TCK (MTK_PIN_NO(101) | 4) +#define PINMUX_GPIO101__FUNC_SSPM_JTAG_TCK (MTK_PIN_NO(101) | 5) +#define PINMUX_GPIO101__FUNC_IO_JTAG_TCK (MTK_PIN_NO(101) | 6) + +#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define PINMUX_GPIO102__FUNC_CLKM1 (MTK_PIN_NO(102) | 1) +#define PINMUX_GPIO102__FUNC_I2S2_DI (MTK_PIN_NO(102) | 2) +#define PINMUX_GPIO102__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(102) | 3) +#define PINMUX_GPIO102__FUNC_CONN_MCU_TDI (MTK_PIN_NO(102) | 4) +#define PINMUX_GPIO102__FUNC_SSPM_JTAG_TDI (MTK_PIN_NO(102) | 5) +#define PINMUX_GPIO102__FUNC_IO_JTAG_TDI (MTK_PIN_NO(102) | 6) +#define PINMUX_GPIO102__FUNC_DBG_MON_B8 (MTK_PIN_NO(102) | 7) + +#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define PINMUX_GPIO103__FUNC_SCL2 (MTK_PIN_NO(103) | 1) + +#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define PINMUX_GPIO104__FUNC_SDA2 (MTK_PIN_NO(104) | 1) + +#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define PINMUX_GPIO105__FUNC_SCL4 (MTK_PIN_NO(105) | 1) + +#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define PINMUX_GPIO106__FUNC_SDA4 (MTK_PIN_NO(106) | 1) + +#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define PINMUX_GPIO107__FUNC_DMIC_CLK (MTK_PIN_NO(107) | 1) +#define PINMUX_GPIO107__FUNC_ANT_SEL0 (MTK_PIN_NO(107) | 2) +#define PINMUX_GPIO107__FUNC_CLKM0 (MTK_PIN_NO(107) | 3) +#define PINMUX_GPIO107__FUNC_SDA7 (MTK_PIN_NO(107) | 4) +#define PINMUX_GPIO107__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(107) | 5) +#define PINMUX_GPIO107__FUNC_PWM_A (MTK_PIN_NO(107) | 6) +#define PINMUX_GPIO107__FUNC_DBG_MON_B12 (MTK_PIN_NO(107) | 7) + +#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define PINMUX_GPIO108__FUNC_CMMCLK2 (MTK_PIN_NO(108) | 1) +#define PINMUX_GPIO108__FUNC_ANT_SEL1 (MTK_PIN_NO(108) | 2) +#define PINMUX_GPIO108__FUNC_CLKM1 (MTK_PIN_NO(108) | 3) +#define PINMUX_GPIO108__FUNC_SCL8 (MTK_PIN_NO(108) | 4) +#define PINMUX_GPIO108__FUNC_DAP_MD32_SWD (MTK_PIN_NO(108) | 5) +#define PINMUX_GPIO108__FUNC_PWM_B (MTK_PIN_NO(108) | 6) +#define PINMUX_GPIO108__FUNC_DBG_MON_B13 (MTK_PIN_NO(108) | 7) + +#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define PINMUX_GPIO109__FUNC_DMIC_DAT (MTK_PIN_NO(109) | 1) +#define PINMUX_GPIO109__FUNC_ANT_SEL2 (MTK_PIN_NO(109) | 2) +#define PINMUX_GPIO109__FUNC_CLKM2 (MTK_PIN_NO(109) | 3) +#define PINMUX_GPIO109__FUNC_SDA8 (MTK_PIN_NO(109) | 4) +#define PINMUX_GPIO109__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(109) | 5) +#define PINMUX_GPIO109__FUNC_PWM_C (MTK_PIN_NO(109) | 6) +#define PINMUX_GPIO109__FUNC_DBG_MON_B14 (MTK_PIN_NO(109) | 7) + +#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define PINMUX_GPIO110__FUNC_SCL7 (MTK_PIN_NO(110) | 1) +#define PINMUX_GPIO110__FUNC_ANT_SEL0 (MTK_PIN_NO(110) | 2) +#define PINMUX_GPIO110__FUNC_TP_URXD1_AO (MTK_PIN_NO(110) | 3) +#define PINMUX_GPIO110__FUNC_USB_DRVVBUS (MTK_PIN_NO(110) | 4) +#define PINMUX_GPIO110__FUNC_SRCLKENAI1 (MTK_PIN_NO(110) | 5) +#define PINMUX_GPIO110__FUNC_KPCOL2 (MTK_PIN_NO(110) | 6) +#define PINMUX_GPIO110__FUNC_URXD1 (MTK_PIN_NO(110) | 7) + +#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define PINMUX_GPIO111__FUNC_CMMCLK3 (MTK_PIN_NO(111) | 1) +#define PINMUX_GPIO111__FUNC_ANT_SEL1 (MTK_PIN_NO(111) | 2) +#define PINMUX_GPIO111__FUNC_SRCLKENAI0 (MTK_PIN_NO(111) | 3) +#define PINMUX_GPIO111__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(111) | 4) +#define PINMUX_GPIO111__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(111) | 5) +#define PINMUX_GPIO111__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(111) | 7) + +#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define PINMUX_GPIO112__FUNC_SDA7 (MTK_PIN_NO(112) | 1) +#define PINMUX_GPIO112__FUNC_ANT_SEL2 (MTK_PIN_NO(112) | 2) +#define PINMUX_GPIO112__FUNC_TP_UTXD1_AO (MTK_PIN_NO(112) | 3) +#define PINMUX_GPIO112__FUNC_IDDIG (MTK_PIN_NO(112) | 4) +#define PINMUX_GPIO112__FUNC_AGPS_SYNC (MTK_PIN_NO(112) | 5) +#define PINMUX_GPIO112__FUNC_KPROW2 (MTK_PIN_NO(112) | 6) +#define PINMUX_GPIO112__FUNC_UTXD1 (MTK_PIN_NO(112) | 7) + +#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define PINMUX_GPIO113__FUNC_CONN_TOP_CLK (MTK_PIN_NO(113) | 1) +#define PINMUX_GPIO113__FUNC_SCL6 (MTK_PIN_NO(113) | 3) +#define PINMUX_GPIO113__FUNC_AUXIF_CLK0 (MTK_PIN_NO(113) | 4) +#define PINMUX_GPIO113__FUNC_TP_UCTS1_AO (MTK_PIN_NO(113) | 6) + +#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define PINMUX_GPIO114__FUNC_CONN_TOP_DATA (MTK_PIN_NO(114) | 1) +#define PINMUX_GPIO114__FUNC_SDA6 (MTK_PIN_NO(114) | 3) +#define PINMUX_GPIO114__FUNC_AUXIF_ST0 (MTK_PIN_NO(114) | 4) +#define PINMUX_GPIO114__FUNC_TP_URTS1_AO (MTK_PIN_NO(114) | 6) + +#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define PINMUX_GPIO115__FUNC_CONN_BT_CLK (MTK_PIN_NO(115) | 1) +#define PINMUX_GPIO115__FUNC_UTXD1 (MTK_PIN_NO(115) | 2) +#define PINMUX_GPIO115__FUNC_PTA_TXD (MTK_PIN_NO(115) | 3) +#define PINMUX_GPIO115__FUNC_AUXIF_CLK1 (MTK_PIN_NO(115) | 4) +#define PINMUX_GPIO115__FUNC_DAP_MD32_SWD (MTK_PIN_NO(115) | 5) +#define PINMUX_GPIO115__FUNC_TP_UTXD1_AO (MTK_PIN_NO(115) | 6) + +#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define PINMUX_GPIO116__FUNC_CONN_BT_DATA (MTK_PIN_NO(116) | 1) +#define PINMUX_GPIO116__FUNC_IPU_JTAG_TRST (MTK_PIN_NO(116) | 2) +#define PINMUX_GPIO116__FUNC_AUXIF_ST1 (MTK_PIN_NO(116) | 4) +#define PINMUX_GPIO116__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(116) | 5) +#define PINMUX_GPIO116__FUNC_TP_URXD2_AO (MTK_PIN_NO(116) | 6) +#define PINMUX_GPIO116__FUNC_DBG_MON_A0 (MTK_PIN_NO(116) | 7) + +#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define PINMUX_GPIO117__FUNC_CONN_WF_HB0 (MTK_PIN_NO(117) | 1) +#define PINMUX_GPIO117__FUNC_IPU_JTAG_TDO (MTK_PIN_NO(117) | 2) +#define PINMUX_GPIO117__FUNC_TP_UTXD2_AO (MTK_PIN_NO(117) | 6) +#define PINMUX_GPIO117__FUNC_DBG_MON_A4 (MTK_PIN_NO(117) | 7) + +#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define PINMUX_GPIO118__FUNC_CONN_WF_HB1 (MTK_PIN_NO(118) | 1) +#define PINMUX_GPIO118__FUNC_IPU_JTAG_TDI (MTK_PIN_NO(118) | 2) +#define PINMUX_GPIO118__FUNC_SSPM_URXD_AO (MTK_PIN_NO(118) | 5) +#define PINMUX_GPIO118__FUNC_TP_UCTS2_AO (MTK_PIN_NO(118) | 6) +#define PINMUX_GPIO118__FUNC_DBG_MON_A5 (MTK_PIN_NO(118) | 7) + +#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define PINMUX_GPIO119__FUNC_CONN_WF_HB2 (MTK_PIN_NO(119) | 1) +#define PINMUX_GPIO119__FUNC_IPU_JTAG_TCK (MTK_PIN_NO(119) | 2) +#define PINMUX_GPIO119__FUNC_SSPM_UTXD_AO (MTK_PIN_NO(119) | 5) +#define PINMUX_GPIO119__FUNC_TP_URTS2_AO (MTK_PIN_NO(119) | 6) + +#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define PINMUX_GPIO120__FUNC_CONN_WB_PTA (MTK_PIN_NO(120) | 1) +#define PINMUX_GPIO120__FUNC_IPU_JTAG_TMS (MTK_PIN_NO(120) | 2) +#define PINMUX_GPIO120__FUNC_CCU_URXD_AO (MTK_PIN_NO(120) | 5) + +#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define PINMUX_GPIO121__FUNC_CONN_HRST_B (MTK_PIN_NO(121) | 1) +#define PINMUX_GPIO121__FUNC_URXD1 (MTK_PIN_NO(121) | 2) +#define PINMUX_GPIO121__FUNC_PTA_RXD (MTK_PIN_NO(121) | 3) +#define PINMUX_GPIO121__FUNC_CCU_UTXD_AO (MTK_PIN_NO(121) | 5) +#define PINMUX_GPIO121__FUNC_TP_URXD1_AO (MTK_PIN_NO(121) | 6) + +#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define PINMUX_GPIO122__FUNC_MSDC0_CMD (MTK_PIN_NO(122) | 1) +#define PINMUX_GPIO122__FUNC_SSPM_URXD2_AO (MTK_PIN_NO(122) | 2) +#define PINMUX_GPIO122__FUNC_ANT_SEL1 (MTK_PIN_NO(122) | 3) +#define PINMUX_GPIO122__FUNC_DBG_MON_A12 (MTK_PIN_NO(122) | 7) + +#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define PINMUX_GPIO123__FUNC_MSDC0_DAT0 (MTK_PIN_NO(123) | 1) +#define PINMUX_GPIO123__FUNC_ANT_SEL0 (MTK_PIN_NO(123) | 3) +#define PINMUX_GPIO123__FUNC_DBG_MON_A13 (MTK_PIN_NO(123) | 7) + +#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define PINMUX_GPIO124__FUNC_MSDC0_CLK (MTK_PIN_NO(124) | 1) +#define PINMUX_GPIO124__FUNC_DBG_MON_A14 (MTK_PIN_NO(124) | 7) + +#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define PINMUX_GPIO125__FUNC_MSDC0_DAT2 (MTK_PIN_NO(125) | 1) +#define PINMUX_GPIO125__FUNC_MRG_CLK (MTK_PIN_NO(125) | 3) +#define PINMUX_GPIO125__FUNC_DBG_MON_A15 (MTK_PIN_NO(125) | 7) + +#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define PINMUX_GPIO126__FUNC_MSDC0_DAT4 (MTK_PIN_NO(126) | 1) +#define PINMUX_GPIO126__FUNC_ANT_SEL5 (MTK_PIN_NO(126) | 3) +#define PINMUX_GPIO126__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(126) | 6) +#define PINMUX_GPIO126__FUNC_DBG_MON_A16 (MTK_PIN_NO(126) | 7) + +#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) +#define PINMUX_GPIO127__FUNC_MSDC0_DAT6 (MTK_PIN_NO(127) | 1) +#define PINMUX_GPIO127__FUNC_ANT_SEL4 (MTK_PIN_NO(127) | 3) +#define PINMUX_GPIO127__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(127) | 6) +#define PINMUX_GPIO127__FUNC_DBG_MON_A17 (MTK_PIN_NO(127) | 7) + +#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) +#define PINMUX_GPIO128__FUNC_MSDC0_DAT1 (MTK_PIN_NO(128) | 1) +#define PINMUX_GPIO128__FUNC_ANT_SEL2 (MTK_PIN_NO(128) | 3) +#define PINMUX_GPIO128__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(128) | 6) +#define PINMUX_GPIO128__FUNC_DBG_MON_A18 (MTK_PIN_NO(128) | 7) + +#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) +#define PINMUX_GPIO129__FUNC_MSDC0_DAT5 (MTK_PIN_NO(129) | 1) +#define PINMUX_GPIO129__FUNC_ANT_SEL3 (MTK_PIN_NO(129) | 3) +#define PINMUX_GPIO129__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(129) | 6) +#define PINMUX_GPIO129__FUNC_DBG_MON_A23 (MTK_PIN_NO(129) | 7) + +#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) +#define PINMUX_GPIO130__FUNC_MSDC0_DAT7 (MTK_PIN_NO(130) | 1) +#define PINMUX_GPIO130__FUNC_MRG_DO (MTK_PIN_NO(130) | 3) +#define PINMUX_GPIO130__FUNC_DBG_MON_A24 (MTK_PIN_NO(130) | 7) + +#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) +#define PINMUX_GPIO131__FUNC_MSDC0_DSL (MTK_PIN_NO(131) | 1) +#define PINMUX_GPIO131__FUNC_MRG_SYNC (MTK_PIN_NO(131) | 3) +#define PINMUX_GPIO131__FUNC_DBG_MON_A25 (MTK_PIN_NO(131) | 7) + +#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) +#define PINMUX_GPIO132__FUNC_MSDC0_DAT3 (MTK_PIN_NO(132) | 1) +#define PINMUX_GPIO132__FUNC_MRG_DI (MTK_PIN_NO(132) | 3) +#define PINMUX_GPIO132__FUNC_DBG_MON_A26 (MTK_PIN_NO(132) | 7) + +#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) +#define PINMUX_GPIO133__FUNC_MSDC0_RSTB (MTK_PIN_NO(133) | 1) +#define PINMUX_GPIO133__FUNC_AGPS_SYNC (MTK_PIN_NO(133) | 3) +#define PINMUX_GPIO133__FUNC_DBG_MON_A27 (MTK_PIN_NO(133) | 7) + +#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) +#define PINMUX_GPIO134__FUNC_RTC32K_CK (MTK_PIN_NO(134) | 1) + +#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0) +#define PINMUX_GPIO135__FUNC_WATCHDOG (MTK_PIN_NO(135) | 1) + +#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0) +#define PINMUX_GPIO136__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(136) | 1) +#define PINMUX_GPIO136__FUNC_AUD_CLK_MISO (MTK_PIN_NO(136) | 2) +#define PINMUX_GPIO136__FUNC_I2S1_MCK (MTK_PIN_NO(136) | 3) +#define PINMUX_GPIO136__FUNC_UFS_UNIPRO_SCL (MTK_PIN_NO(136) | 6) + +#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0) +#define PINMUX_GPIO137__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(137) | 1) +#define PINMUX_GPIO137__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(137) | 2) +#define PINMUX_GPIO137__FUNC_I2S1_BCK (MTK_PIN_NO(137) | 3) + +#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0) +#define PINMUX_GPIO138__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(138) | 1) +#define PINMUX_GPIO138__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(138) | 2) +#define PINMUX_GPIO138__FUNC_I2S1_LRCK (MTK_PIN_NO(138) | 3) +#define PINMUX_GPIO138__FUNC_DBG_MON_B24 (MTK_PIN_NO(138) | 7) + +#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0) +#define PINMUX_GPIO139__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(139) | 1) +#define PINMUX_GPIO139__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(139) | 2) +#define PINMUX_GPIO139__FUNC_I2S1_DO (MTK_PIN_NO(139) | 3) +#define PINMUX_GPIO139__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(139) | 6) + +#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0) +#define PINMUX_GPIO140__FUNC_AUD_CLK_MISO (MTK_PIN_NO(140) | 1) +#define PINMUX_GPIO140__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(140) | 2) +#define PINMUX_GPIO140__FUNC_I2S0_MCK (MTK_PIN_NO(140) | 3) +#define PINMUX_GPIO140__FUNC_UFS_UNIPRO_SDA (MTK_PIN_NO(140) | 6) + +#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0) +#define PINMUX_GPIO141__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(141) | 1) +#define PINMUX_GPIO141__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(141) | 2) +#define PINMUX_GPIO141__FUNC_I2S0_BCK (MTK_PIN_NO(141) | 3) + +#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0) +#define PINMUX_GPIO142__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(142) | 1) +#define PINMUX_GPIO142__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(142) | 2) +#define PINMUX_GPIO142__FUNC_I2S0_LRCK (MTK_PIN_NO(142) | 3) +#define PINMUX_GPIO142__FUNC_VOW_DAT_MISO (MTK_PIN_NO(142) | 4) +#define PINMUX_GPIO142__FUNC_DBG_MON_B25 (MTK_PIN_NO(142) | 7) + +#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0) +#define PINMUX_GPIO143__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(143) | 1) +#define PINMUX_GPIO143__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(143) | 2) +#define PINMUX_GPIO143__FUNC_I2S0_DI (MTK_PIN_NO(143) | 3) +#define PINMUX_GPIO143__FUNC_VOW_CLK_MISO (MTK_PIN_NO(143) | 4) +#define PINMUX_GPIO143__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(143) | 6) +#define PINMUX_GPIO143__FUNC_DBG_MON_B26 (MTK_PIN_NO(143) | 7) + +#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0) +#define PINMUX_GPIO144__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(144) | 1) +#define PINMUX_GPIO144__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(144) | 2) + +#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0) +#define PINMUX_GPIO145__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(145) | 1) + +#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0) +#define PINMUX_GPIO146__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(146) | 1) +#define PINMUX_GPIO146__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(146) | 2) + +#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0) +#define PINMUX_GPIO147__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(147) | 1) + +#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0) +#define PINMUX_GPIO148__FUNC_SRCLKENA0 (MTK_PIN_NO(148) | 1) + +#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0) +#define PINMUX_GPIO149__FUNC_SRCLKENA1 (MTK_PIN_NO(149) | 1) + +#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0) +#define PINMUX_GPIO150__FUNC_PWM_A (MTK_PIN_NO(150) | 1) +#define PINMUX_GPIO150__FUNC_CMFLASH (MTK_PIN_NO(150) | 2) +#define PINMUX_GPIO150__FUNC_CLKM0 (MTK_PIN_NO(150) | 3) +#define PINMUX_GPIO150__FUNC_DBG_MON_B30 (MTK_PIN_NO(150) | 7) + +#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0) +#define PINMUX_GPIO151__FUNC_PWM_B (MTK_PIN_NO(151) | 1) +#define PINMUX_GPIO151__FUNC_CMVREF0 (MTK_PIN_NO(151) | 2) +#define PINMUX_GPIO151__FUNC_CLKM1 (MTK_PIN_NO(151) | 3) +#define PINMUX_GPIO151__FUNC_DBG_MON_B20 (MTK_PIN_NO(151) | 7) + +#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0) +#define PINMUX_GPIO152__FUNC_PWM_C (MTK_PIN_NO(152) | 1) +#define PINMUX_GPIO152__FUNC_CMFLASH (MTK_PIN_NO(152) | 2) +#define PINMUX_GPIO152__FUNC_CLKM2 (MTK_PIN_NO(152) | 3) +#define PINMUX_GPIO152__FUNC_DBG_MON_B21 (MTK_PIN_NO(152) | 7) + +#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0) +#define PINMUX_GPIO153__FUNC_PWM_A (MTK_PIN_NO(153) | 1) +#define PINMUX_GPIO153__FUNC_CMVREF0 (MTK_PIN_NO(153) | 2) +#define PINMUX_GPIO153__FUNC_CLKM3 (MTK_PIN_NO(153) | 3) +#define PINMUX_GPIO153__FUNC_DBG_MON_B22 (MTK_PIN_NO(153) | 7) + +#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0) +#define PINMUX_GPIO154__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(154) | 1) +#define PINMUX_GPIO154__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(154) | 2) +#define PINMUX_GPIO154__FUNC_DBG_MON_B18 (MTK_PIN_NO(154) | 7) + +#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0) +#define PINMUX_GPIO155__FUNC_ANT_SEL0 (MTK_PIN_NO(155) | 1) +#define PINMUX_GPIO155__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(155) | 2) +#define PINMUX_GPIO155__FUNC_CMVREF1 (MTK_PIN_NO(155) | 3) +#define PINMUX_GPIO155__FUNC_SCP_JTAG_TDI (MTK_PIN_NO(155) | 7) + +#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0) +#define PINMUX_GPIO156__FUNC_ANT_SEL1 (MTK_PIN_NO(156) | 1) +#define PINMUX_GPIO156__FUNC_SRCLKENAI0 (MTK_PIN_NO(156) | 2) +#define PINMUX_GPIO156__FUNC_SCL6 (MTK_PIN_NO(156) | 3) +#define PINMUX_GPIO156__FUNC_KPCOL2 (MTK_PIN_NO(156) | 4) +#define PINMUX_GPIO156__FUNC_IDDIG (MTK_PIN_NO(156) | 5) +#define PINMUX_GPIO156__FUNC_SCP_JTAG_TCK (MTK_PIN_NO(156) | 7) + +#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0) +#define PINMUX_GPIO157__FUNC_ANT_SEL2 (MTK_PIN_NO(157) | 1) +#define PINMUX_GPIO157__FUNC_SRCLKENAI1 (MTK_PIN_NO(157) | 2) +#define PINMUX_GPIO157__FUNC_SDA6 (MTK_PIN_NO(157) | 3) +#define PINMUX_GPIO157__FUNC_KPROW2 (MTK_PIN_NO(157) | 4) +#define PINMUX_GPIO157__FUNC_USB_DRVVBUS (MTK_PIN_NO(157) | 5) +#define PINMUX_GPIO157__FUNC_SCP_JTAG_TRSTN (MTK_PIN_NO(157) | 7) + +#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0) +#define PINMUX_GPIO158__FUNC_ANT_SEL3 (MTK_PIN_NO(158) | 1) + +#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0) +#define PINMUX_GPIO159__FUNC_ANT_SEL4 (MTK_PIN_NO(159) | 1) + +#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0) +#define PINMUX_GPIO160__FUNC_ANT_SEL5 (MTK_PIN_NO(160) | 1) + +#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0) +#define PINMUX_GPIO161__FUNC_SPI1_A_MI (MTK_PIN_NO(161) | 1) +#define PINMUX_GPIO161__FUNC_SCP_SPI1_MI (MTK_PIN_NO(161) | 2) +#define PINMUX_GPIO161__FUNC_IDDIG (MTK_PIN_NO(161) | 3) +#define PINMUX_GPIO161__FUNC_ANT_SEL6 (MTK_PIN_NO(161) | 4) +#define PINMUX_GPIO161__FUNC_KPCOL2 (MTK_PIN_NO(161) | 5) +#define PINMUX_GPIO161__FUNC_PTA_RXD (MTK_PIN_NO(161) | 6) +#define PINMUX_GPIO161__FUNC_DBG_MON_B19 (MTK_PIN_NO(161) | 7) + +#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0) +#define PINMUX_GPIO162__FUNC_SPI1_A_CSB (MTK_PIN_NO(162) | 1) +#define PINMUX_GPIO162__FUNC_SCP_SPI1_CS (MTK_PIN_NO(162) | 2) +#define PINMUX_GPIO162__FUNC_USB_DRVVBUS (MTK_PIN_NO(162) | 3) +#define PINMUX_GPIO162__FUNC_ANT_SEL5 (MTK_PIN_NO(162) | 4) +#define PINMUX_GPIO162__FUNC_KPROW2 (MTK_PIN_NO(162) | 5) +#define PINMUX_GPIO162__FUNC_PTA_TXD (MTK_PIN_NO(162) | 6) + +#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0) +#define PINMUX_GPIO163__FUNC_SPI1_A_MO (MTK_PIN_NO(163) | 1) +#define PINMUX_GPIO163__FUNC_SCP_SPI1_MO (MTK_PIN_NO(163) | 2) +#define PINMUX_GPIO163__FUNC_SDA1 (MTK_PIN_NO(163) | 3) +#define PINMUX_GPIO163__FUNC_ANT_SEL4 (MTK_PIN_NO(163) | 4) +#define PINMUX_GPIO163__FUNC_CMMCLK2 (MTK_PIN_NO(163) | 5) +#define PINMUX_GPIO163__FUNC_DMIC_CLK (MTK_PIN_NO(163) | 6) + +#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0) +#define PINMUX_GPIO164__FUNC_SPI1_A_CLK (MTK_PIN_NO(164) | 1) +#define PINMUX_GPIO164__FUNC_SCP_SPI1_CK (MTK_PIN_NO(164) | 2) +#define PINMUX_GPIO164__FUNC_SCL1 (MTK_PIN_NO(164) | 3) +#define PINMUX_GPIO164__FUNC_ANT_SEL3 (MTK_PIN_NO(164) | 4) +#define PINMUX_GPIO164__FUNC_CMMCLK3 (MTK_PIN_NO(164) | 5) +#define PINMUX_GPIO164__FUNC_DMIC_DAT (MTK_PIN_NO(164) | 6) + +#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0) +#define PINMUX_GPIO165__FUNC_PWM_B (MTK_PIN_NO(165) | 1) +#define PINMUX_GPIO165__FUNC_CMMCLK2 (MTK_PIN_NO(165) | 2) +#define PINMUX_GPIO165__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(165) | 3) +#define PINMUX_GPIO165__FUNC_TDM_MCK_2ND (MTK_PIN_NO(165) | 6) +#define PINMUX_GPIO165__FUNC_SCP_JTAG_TDO (MTK_PIN_NO(165) | 7) + +#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0) +#define PINMUX_GPIO166__FUNC_ANT_SEL6 (MTK_PIN_NO(166) | 1) + +#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0) +#define PINMUX_GPIO167__FUNC_RFIC0_BSI_EN (MTK_PIN_NO(167) | 1) +#define PINMUX_GPIO167__FUNC_SPM_BSI_EN (MTK_PIN_NO(167) | 2) + +#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0) +#define PINMUX_GPIO168__FUNC_RFIC0_BSI_CK (MTK_PIN_NO(168) | 1) +#define PINMUX_GPIO168__FUNC_SPM_BSI_CK (MTK_PIN_NO(168) | 2) + +#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0) +#define PINMUX_GPIO169__FUNC_PWM_C (MTK_PIN_NO(169) | 1) +#define PINMUX_GPIO169__FUNC_CMMCLK3 (MTK_PIN_NO(169) | 2) +#define PINMUX_GPIO169__FUNC_CMVREF1 (MTK_PIN_NO(169) | 3) +#define PINMUX_GPIO169__FUNC_ANT_SEL7 (MTK_PIN_NO(169) | 4) +#define PINMUX_GPIO169__FUNC_AGPS_SYNC (MTK_PIN_NO(169) | 5) +#define PINMUX_GPIO169__FUNC_TDM_BCK_2ND (MTK_PIN_NO(169) | 6) +#define PINMUX_GPIO169__FUNC_SCP_JTAG_TMS (MTK_PIN_NO(169) | 7) + +#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0) +#define PINMUX_GPIO170__FUNC_I2S1_BCK (MTK_PIN_NO(170) | 1) +#define PINMUX_GPIO170__FUNC_I2S3_BCK (MTK_PIN_NO(170) | 2) +#define PINMUX_GPIO170__FUNC_SCL7 (MTK_PIN_NO(170) | 3) +#define PINMUX_GPIO170__FUNC_I2S5_BCK (MTK_PIN_NO(170) | 4) +#define PINMUX_GPIO170__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(170) | 5) +#define PINMUX_GPIO170__FUNC_TDM_LRCK_2ND (MTK_PIN_NO(170) | 6) +#define PINMUX_GPIO170__FUNC_ANT_SEL3 (MTK_PIN_NO(170) | 7) + +#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0) +#define PINMUX_GPIO171__FUNC_I2S1_LRCK (MTK_PIN_NO(171) | 1) +#define PINMUX_GPIO171__FUNC_I2S3_LRCK (MTK_PIN_NO(171) | 2) +#define PINMUX_GPIO171__FUNC_SDA7 (MTK_PIN_NO(171) | 3) +#define PINMUX_GPIO171__FUNC_I2S5_LRCK (MTK_PIN_NO(171) | 4) +#define PINMUX_GPIO171__FUNC_URXD1 (MTK_PIN_NO(171) | 5) +#define PINMUX_GPIO171__FUNC_TDM_DATA0_2ND (MTK_PIN_NO(171) | 6) +#define PINMUX_GPIO171__FUNC_ANT_SEL4 (MTK_PIN_NO(171) | 7) + +#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0) +#define PINMUX_GPIO172__FUNC_I2S1_DO (MTK_PIN_NO(172) | 1) +#define PINMUX_GPIO172__FUNC_I2S3_DO (MTK_PIN_NO(172) | 2) +#define PINMUX_GPIO172__FUNC_SCL8 (MTK_PIN_NO(172) | 3) +#define PINMUX_GPIO172__FUNC_I2S5_DO (MTK_PIN_NO(172) | 4) +#define PINMUX_GPIO172__FUNC_UTXD1 (MTK_PIN_NO(172) | 5) +#define PINMUX_GPIO172__FUNC_TDM_DATA1_2ND (MTK_PIN_NO(172) | 6) +#define PINMUX_GPIO172__FUNC_ANT_SEL5 (MTK_PIN_NO(172) | 7) + +#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0) +#define PINMUX_GPIO173__FUNC_I2S1_MCK (MTK_PIN_NO(173) | 1) +#define PINMUX_GPIO173__FUNC_I2S3_MCK (MTK_PIN_NO(173) | 2) +#define PINMUX_GPIO173__FUNC_SDA8 (MTK_PIN_NO(173) | 3) +#define PINMUX_GPIO173__FUNC_I2S5_MCK (MTK_PIN_NO(173) | 4) +#define PINMUX_GPIO173__FUNC_UCTS0 (MTK_PIN_NO(173) | 5) +#define PINMUX_GPIO173__FUNC_TDM_DATA2_2ND (MTK_PIN_NO(173) | 6) +#define PINMUX_GPIO173__FUNC_ANT_SEL6 (MTK_PIN_NO(173) | 7) + +#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0) +#define PINMUX_GPIO174__FUNC_I2S2_DI (MTK_PIN_NO(174) | 1) +#define PINMUX_GPIO174__FUNC_I2S0_DI (MTK_PIN_NO(174) | 2) +#define PINMUX_GPIO174__FUNC_DVFSRC_EXT_REQ (MTK_PIN_NO(174) | 3) +#define PINMUX_GPIO174__FUNC_I2S2_DI2 (MTK_PIN_NO(174) | 4) +#define PINMUX_GPIO174__FUNC_URTS0 (MTK_PIN_NO(174) | 5) +#define PINMUX_GPIO174__FUNC_TDM_DATA3_2ND (MTK_PIN_NO(174) | 6) +#define PINMUX_GPIO174__FUNC_ANT_SEL7 (MTK_PIN_NO(174) | 7) + +#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0) +#define PINMUX_GPIO175__FUNC_ANT_SEL7 (MTK_PIN_NO(175) | 1) + +#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0) + +#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0) + +#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0) + +#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0) + +#endif /* __MT8183-PINFUNC_H */ diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 6b8ab5568481..bcd018c3162b 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb +dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 31457f32e4d0..75ee6cf1e1b4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -58,6 +58,93 @@ status = "okay"; }; + padctl@3520000 { + status = "okay"; + + avdd-pll-erefeut-supply = <&vdd_1v8_pll>; + avdd-usb-supply = <&vdd_3v3_sys>; + dvdd-pex-supply = <&vdd_pex>; + dvdd-pex-pll-supply = <&vdd_pex>; + hvdd-pex-supply = <&vdd_1v8>; + hvdd-pex-pll-supply = <&vdd_1v8>; + vclamp-usb-supply = <&vdd_1v8>; + vddio-hsic-supply = <&gnd>; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + usb3 { + status = "okay"; + + lanes { + usb3-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "okay"; + mode = "otg"; + + vbus-supply = <&vdd_usb0>; + }; + + usb2-1 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_usb1>; + }; + + usb3-0 { + nvidia,usb2-companion = <1>; + status = "okay"; + }; + }; + }; + + usb@3530000 { + status = "okay"; + + phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@3520000/pads/usb3/lanes/usb3-0}>; + phy-names = "usb2-0", "usb2-1", "usb3-0"; + }; + pcie@10003000 { status = "okay"; @@ -182,5 +269,33 @@ vin-supply = <&vdd_5v0_sys>; }; + + vdd_usb0: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + + regulator-name = "VDD_USB0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb1: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + + regulator-name = "VDD_USB1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 89a2da46efae..64686b033c38 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -268,43 +268,30 @@ regulator-name = "AVDD_DSI_CSI_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; vdd_1v8: sd2 { regulator-name = "VDD_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; vdd_3v3_sys: sd3 { regulator-name = "VDD_3V3_SYS"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; - ldo0 { + vdd_1v8_pll: ldo0 { regulator-name = "VDD_1V8_AP_PLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; ldo2 { regulator-name = "VDDIO_3V3_AOHV"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - /* XXX */ regulator-always-on; regulator-boot-on; }; @@ -331,18 +318,12 @@ regulator-name = "VDD_HDMI_1V05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; vdd_pex: ldo8 { regulator-name = "VDD_PEX_1V05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; }; }; }; @@ -360,10 +341,21 @@ #address-cells = <1>; #size-cells = <0>; - vdd_5v0_sys: regulator@0 { + gnd: regulator@0 { compatible = "regulator-fixed"; reg = <0>; + regulator-name = "GND"; + regulator-min-microvolt = <0>; + regulator-max-microvolt = <0>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "VDD_5V0_SYS"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -371,18 +363,14 @@ regulator-boot-on; }; - vdd_1v8_ap: regulator@1 { + vdd_1v8_ap: regulator@2 { compatible = "regulator-fixed"; - reg = <1>; + reg = <2>; regulator-name = "VDD_1V8_AP"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - /* XXX */ - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 97aeb946ed5e..f0bb6ced4976 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -317,10 +317,11 @@ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>; nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>; nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>; - nvidia,default-tap = <0x5>; - nvidia,default-trim = <0x9>; + nvidia,default-tap = <0x9>; + nvidia,default-trim = <0x5>; nvidia,dqs-trim = <63>; mmc-hs400-1_8v; + supports-cqe; status = "disabled"; }; @@ -340,6 +341,141 @@ status = "disabled"; }; + padctl: padctl@3520000 { + compatible = "nvidia,tegra186-xusb-padctl"; + reg = <0x0 0x03520000 0x0 0x1000>, + <0x0 0x03540000 0x0 0x1000>; + reg-names = "padctl", "ao"; + + resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>; + reset-names = "padctl"; + + status = "disabled"; + + pads { + usb2 { + clocks = <&bpmp TEGRA186_CLK_USB2_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + usb2-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-2 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + clocks = <&bpmp TEGRA186_CLK_HSIC_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + usb3 { + status = "disabled"; + + lanes { + usb3-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-2 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { + status = "disabled"; + }; + + usb2-2 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + usb3-0 { + status = "disabled"; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + }; + }; + + usb@3530000 { + compatible = "nvidia,tegra186-xusb"; + reg = <0x0 0x03530000 0x0 0x8000>, + <0x0 0x03538000 0x0 0x1000>; + reg-names = "hcd", "fpci"; + + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>, + <&bpmp TEGRA186_CLK_XUSB_FALCON>, + <&bpmp TEGRA186_CLK_XUSB_SS>, + <&bpmp TEGRA186_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA186_CLK_CLK_M>, + <&bpmp TEGRA186_CLK_XUSB_FS>, + <&bpmp TEGRA186_CLK_PLLU>, + <&bpmp TEGRA186_CLK_CLK_M>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss", + "xusb_ss_src", "xusb_hs_src", "xusb_fs_src", + "pll_u_480m", "clk_m", "pll_e"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + nvidia,xusb-padctl = <&padctl>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + fuse@3820000 { compatible = "nvidia,tegra186-efuse"; reg = <0x0 0x03820000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 246c1ebbd055..0fd5bd29fbf9 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -256,6 +256,7 @@ interrupt-parent = <&gpio>; interrupts = <TEGRA194_MAIN_GPIO(H, 2) IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&vdd_1v8ls>; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index b62e96945846..73801b48d1d8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -57,8 +57,6 @@ pwms = <&pwm4 0 45334>; cooling-levels = <0 64 128 255>; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 053458a5db55..4dcd0d36189a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -305,6 +305,12 @@ cpu@3 { enable-method = "psci"; }; + + idle-states { + cpu-sleep { + status = "okay"; + }; + }; }; psci { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 9fad0d27278e..5a57396b5948 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -99,4 +99,16 @@ pinctrl-0 = <&dvfs_pwm_active_state>; pinctrl-1 = <&dvfs_pwm_inactive_state>; }; + + aconnect@702c0000 { + status = "okay"; + + dma@702e2000 { + status = "okay"; + }; + + agic@702f9000 { + status = "okay"; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 95e890d8a119..a7dc319214a4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1352,6 +1352,11 @@ padctl@7009f000 { status = "okay"; + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&avdd_1v05_pll>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + pads { usb2 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi index 3ddf173ccc18..88a4b9333d84 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi @@ -1629,6 +1629,12 @@ cpu@3 { enable-method = "psci"; }; + + idle-states { + cpu-sleep { + status = "okay"; + }; + }; }; psci { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts new file mode 100644 index 000000000000..5d0181908f45 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -0,0 +1,650 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/mfd/max77620.h> + +#include "tegra210.dtsi" + +/ { + model = "NVIDIA Jetson Nano Developer Kit"; + compatible = "nvidia,p3450-0000", "nvidia,tegra210"; + + aliases { + ethernet = "/pcie@1003000/pci@2,0/ethernet@0,0"; + rtc0 = "/i2c@7000d000/pmic@3c"; + rtc1 = "/rtc@7000e000"; + serial0 = &uarta; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x1 0x0>; + }; + + pcie@1003000 { + status = "okay"; + + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + hvddio-pex-supply = <&vdd_1v8>; + dvddio-pex-supply = <&vdd_pex_1v05>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + vddio-pex-ctl-supply = <&vdd_1v8>; + + pci@1,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>; + phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3"; + nvidia,num-lanes = <4>; + status = "okay"; + }; + + pci@2,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; + phy-names = "pcie-0"; + status = "okay"; + + ethernet@0,0 { + reg = <0x000000 0 0 0 0>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + }; + + host1x@50000000 { + dpaux@54040000 { + status = "okay"; + }; + + sor@54580000 { + status = "okay"; + + avdd-io-supply = <&avdd_1v05>; + vdd-pll-supply = <&vdd_1v8>; + hdmi-supply = <&vdd_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) + GPIO_ACTIVE_LOW>; + nvidia,xbar-cfg = <0 1 2 3 4>; + }; + }; + + gpu@57000000 { + vdd-supply = <&vdd_gpu>; + status = "okay"; + }; + + /* debug port */ + serial@70006000 { + status = "okay"; + }; + + hdmi_ddc: i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max77620_default>; + + max77620_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + drive-push-pull = <1>; + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-power-down-slot = <7>; + }; + + gpio2 { + pins = "gpio2"; + function = "fps-out"; + drive-open-drain = <1>; + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-power-down-slot = <7>; + }; + + gpio3 { + pins = "gpio3"; + function = "fps-out"; + drive-open-drain = <1>; + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + maxim,active-fps-power-up-slot = <4>; + maxim,active-fps-power-down-slot = <3>; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + }; + + gpio5_6_7 { + pins = "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-push-pull = <1>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,suspend-fps-time-period-us = <5120>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,suspend-fps-time-period-us = <5120>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + }; + }; + + regulators { + in-ldo0-1-supply = <&vdd_pre>; + in-ldo2-supply = <&vdd_3v3_sys>; + in-ldo3-5-supply = <&vdd_1v8>; + in-ldo4-6-supply = <&vdd_5v0_sys>; + in-ldo7-8-supply = <&vdd_pre>; + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + + vdd_soc: sd0 { + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1170000>; + regulator-enable-ramp-delay = <146>; + regulator-disable-ramp-delay = <4080>; + regulator-ramp-delay = <27500>; + regulator-ramp-delay-scale = <300>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + maxim,active-fps-power-up-slot = <1>; + maxim,active-fps-power-down-slot = <6>; + }; + + vdd_ddr: sd1 { + regulator-name = "VDD_DDR_1V1_PMIC"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-enable-ramp-delay = <176>; + regulator-disable-ramp-delay = <145800>; + regulator-ramp-delay = <27500>; + regulator-ramp-delay-scale = <300>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + maxim,active-fps-power-up-slot = <5>; + maxim,active-fps-power-down-slot = <2>; + }; + + vdd_pre: sd2 { + regulator-name = "VDD_PRE_REG_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <176>; + regulator-disable-ramp-delay = <32000>; + regulator-ramp-delay = <27500>; + regulator-ramp-delay-scale = <350>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + maxim,active-fps-power-up-slot = <2>; + maxim,active-fps-power-down-slot = <5>; + }; + + vdd_1v8: sd3 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <242>; + regulator-disable-ramp-delay = <118000>; + regulator-ramp-delay = <27500>; + regulator-ramp-delay-scale = <360>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + maxim,active-fps-power-up-slot = <3>; + maxim,active-fps-power-down-slot = <4>; + }; + + vdd_sys_1v2: ldo0 { + regulator-name = "AVDD_SYS_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <26>; + regulator-disable-ramp-delay = <626>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-power-down-slot = <7>; + }; + + vdd_pex_1v05: ldo1 { + regulator-name = "VDD_PEX_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <22>; + regulator-disable-ramp-delay = <650>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-power-down-slot = <7>; + }; + + vddio_sdmmc: ldo2 { + regulator-name = "VDDIO_SDMMC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <62>; + regulator-disable-ramp-delay = <650>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>; + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-power-down-slot = <7>; + }; + + ldo3 { + status = "disabled"; + }; + + vdd_rtc: ldo4 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <22>; + regulator-disable-ramp-delay = <610>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + regulator-disable-active-discharge; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + maxim,active-fps-power-up-slot = <1>; + maxim,active-fps-power-down-slot = <6>; + }; + + ldo5 { + status = "disabled"; + }; + + ldo6 { + status = "disabled"; + }; + + avdd_1v05_pll: ldo7 { + regulator-name = "AVDD_1V05_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <24>; + regulator-disable-ramp-delay = <2768>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + maxim,active-fps-power-up-slot = <3>; + maxim,active-fps-power-down-slot = <4>; + }; + + avdd_1v05: ldo8 { + regulator-name = "AVDD_SATA_HDMI_DP_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <22>; + regulator-disable-ramp-delay = <1160>; + regulator-ramp-delay = <100000>; + regulator-ramp-delay-scale = <200>; + + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + maxim,active-fps-power-up-slot = <6>; + maxim,active-fps-power-down-slot = <1>; + }; + }; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + }; + + hda@70030000 { + nvidia,model = "jetson-nano-hda"; + + status = "okay"; + }; + + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0"; + + avdd-usb-supply = <&vdd_3v3_sys>; + dvddio-pex-supply = <&vdd_pex_1v05>; + hvddio-pex-supply = <&vdd_1v8>; + /* these really belong to the XUSB pad controller */ + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>; + hvdd-usb-ss-pll-e-supply = <&vdd_1v8>; + + status = "okay"; + }; + + padctl@7009f000 { + status = "okay"; + + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "pcie-x1"; + status = "okay"; + }; + + pcie-1 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-2 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-3 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-4 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-5 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-6 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "okay"; + mode = "otg"; + }; + + usb2-1 { + status = "okay"; + mode = "host"; + }; + + usb2-2 { + status = "okay"; + mode = "host"; + }; + + usb3-0 { + status = "okay"; + nvidia,usb2-companion = <1>; + vbus-supply = <&vdd_hub_3v3>; + }; + }; + }; + + sdhci@700b0000 { + status = "okay"; + bus-width = <4>; + + cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; + + vqmmc-supply = <&vddio_sdmmc>; + vmmc-supply = <&vdd_3v3_sd>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + debounce-interval = <30>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <BTN_1>; + debounce-interval = <30>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + regulator-disable-ramp-delay = <11340>; + regulator-always-on; + regulator-boot-on; + + gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_sd: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + + regulator-name = "VDD_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + + regulator-name = "VDD_HDMI_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_hub_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + + regulator-name = "VDD_HUB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_cpu: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + + regulator-name = "VDD_CPU"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + + gpio = <&pmic 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_gpu: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + + regulator-name = "VDD_GPU"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-enable-ramp-delay = <250>; + + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index a4b8f668a6d4..72c7a04ac1df 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1654,6 +1654,11 @@ padctl@7009f000 { status = "okay"; + avdd-pll-utmip-supply = <&pp1800>; + avdd-pll-uerefe-supply = <&pp1050_avdd>; + dvdd-pex-pll-supply = <&avddio_1v05>; + hvdd-pex-pll-e-supply = <&pp1800>; + pads { usb2 { status = "okay"; @@ -1751,6 +1756,13 @@ cpu@3 { enable-method = "psci"; }; + + idle-states { + cpu-sleep { + arm,psci-suspend-param = <0x00010007>; + status = "okay"; + }; + }; }; gpio-keys { diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 6574396d2257..a550c0a4d572 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -384,14 +384,22 @@ }; timer@60005000 { - compatible = "nvidia,tegra210-timer", "nvidia,tegra20-timer"; + compatible = "nvidia,tegra210-timer"; reg = <0x0 0x60005000 0x0 0x400>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_TIMER>; clock-names = "timer"; }; @@ -1363,24 +1371,51 @@ <&dfll>; clock-names = "cpu_g", "pll_x", "pll_p", "dfll"; clock-latency = <300000>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&L2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <1>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&L2>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <2>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&L2>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <3>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&L2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x40000007>; + entry-latency-us = <100>; + exit-latency-us = <30>; + min-residency-us = <1000>; + wakeup-latency-us = <130>; + idle-state-name = "cpu-sleep"; + status = "disabled"; + }; + }; + + L2: l2-cache { + compatible = "cache"; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi index 6a573875d45a..1c0d06f59d00 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi @@ -62,4 +62,56 @@ bias-disable; }; }; + + hdmi_hpd_active: hdmi_hpd_active { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <16>; + }; + }; + + hdmi_hpd_suspend: hdmi_hpd_suspend { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <2>; + }; + }; + + hdmi_ddc_active: hdmi_ddc_active { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + hdmi_ddc_suspend: hdmi_ddc_suspend { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-down; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi index a6ad3d7fe655..31a3e3311ad5 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi @@ -36,6 +36,14 @@ }; }; + audio_mclk: clk_div1 { + pinconf { + pins = "gpio15"; + function = "func1"; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; + volume_up_gpio: pm8996_gpio2 { pinconf { pins = "gpio2"; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 6d50449fbcdf..943f69912074 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -18,6 +18,8 @@ #include "apq8096-db820c-pmic-pins.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> /* * GPIO name legend: proper name = the GPIO line is used as GPIO @@ -63,6 +65,7 @@ }; clocks { + compatible = "simple-bus"; divclk4: divclk4 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -72,6 +75,15 @@ pinctrl-names = "default"; pinctrl-0 = <&divclk4_pin_a>; }; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 0>; + }; }; soc { @@ -452,6 +464,43 @@ perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; }; }; + + slim_msm: slim@91c0000 { + ngd@1 { + wcd9335: codec@1{ + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + }; + }; + }; + + mdss@900000 { + status = "okay"; + + mdp@901000 { + status = "okay"; + }; + + hdmi-phy@9a0600 { + status = "okay"; + + vddio-supply = <&pm8994_l12>; + vcca-supply = <&pm8994_l28>; + #phy-cells = <0>; + }; + + hdmi-tx@9a0000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&pm8994_l12>; + core-vcc-supply = <&pm8994_s4>; + }; + }; }; @@ -639,3 +688,75 @@ }; }; }; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "DB820c"; + audio-routing = "RX_BIAS", "MCLK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI"; + cpu { + sound-dai = <&q6afedai HDMI_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&hdmi 0>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 0803ca8c02da..423dda996b5d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -180,19 +180,19 @@ }; thermal-zones { - cpu-thermal0 { + cpu0_1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens 4>; trips { - cpu_alert0: trip0 { + cpu0_1_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit0: trip1 { + cpu0_1_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -201,7 +201,7 @@ cooling-maps { map0 { - trip = <&cpu_alert0>; + trip = <&cpu0_1_alert0>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, @@ -210,19 +210,19 @@ }; }; - cpu-thermal1 { + cpu2_3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens 3>; trips { - cpu_alert1: trip0 { + cpu2_3_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit1: trip1 { + cpu2_3_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -231,7 +231,7 @@ cooling-maps { map0 { - trip = <&cpu_alert1>; + trip = <&cpu2_3_alert0>; cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, @@ -247,12 +247,12 @@ thermal-sensors = <&tsens 2>; trips { - gpu_alert: trip0 { + gpu_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - gpu_crit: trip1 { + gpu_crit: gpu_crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -267,18 +267,27 @@ thermal-sensors = <&tsens 1>; trips { - cam_alert: trip0 { + cam_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; - type = "passive"; + type = "hot"; }; - cam_crit: trip1 { - temperature = <95000>; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + modem_alert0: trip-point@0 { + temperature = <85000>; hysteresis = <2000>; - type = "critical"; + type = "hot"; }; }; - }; }; @@ -1015,8 +1024,9 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&gcc GCC_MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "ref"; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi index 131878db9852..fba2229b6236 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi @@ -13,6 +13,49 @@ &msmgpio { + wcd9xxx_intr { + wcd_intr_default: wcd_intr_default{ + mux { + pins = "gpio54"; + function = "gpio"; + }; + + config { + pins = "gpio54"; + drive-strength = <2>; /* 2 mA */ + bias-pull-down; /* pull down */ + input-enable; + }; + }; + }; + + cdc_reset_ctrl { + cdc_reset_sleep: cdc_reset_sleep { + mux { + pins = "gpio64"; + function = "gpio"; + }; + config { + pins = "gpio64"; + drive-strength = <16>; + bias-disable; + output-low; + }; + }; + cdc_reset_active:cdc_reset_active { + mux { + pins = "gpio64"; + function = "gpio"; + }; + config { + pins = "gpio64"; + drive-strength = <16>; + bias-pull-down; + output-high; + }; + }; + }; + blsp1_spi0_default: blsp1_spi0_default { pinmux { function = "blsp_spi1"; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c761269caf80..c4e7fde9d88e 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8996.h> #include <dt-bindings/clock/qcom,mmcc-msm8996.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/soc/qcom,apr.h> / { interrupt-parent = <&intc>; @@ -84,6 +85,12 @@ qcom,client-id = <1>; qcom,vmid = <15>; }; + + zap_shader_region: gpu@8f200000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; + }; }; cpus { @@ -154,20 +161,20 @@ }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 3>; trips { - cpu_alert0: trip0 { + cpu0_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit0: trip1 { + cpu0_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -175,20 +182,20 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 5>; trips { - cpu_alert1: trip0 { + cpu1_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit1: trip1 { + cpu1_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -196,20 +203,20 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 8>; trips { - cpu_alert2: trip0 { + cpu2_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit2: trip1 { + cpu2_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -217,26 +224,176 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens0 10>; trips { - cpu_alert3: trip0 { + cpu3_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit3: trip1 { + cpu3_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; }; }; }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + gpu1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + gpu2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + m4m-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + m4m_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + l3-or-venus-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + l3_or_venus_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cluster0_l2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster1-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cluster1_l2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + camera_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + q6_dsp_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + modemtx_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; }; timer { @@ -796,6 +953,11 @@ reg = <0x24f 0x1>; bits = <1 4>; }; + + gpu_speed_bin: gpu_speed_bin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; }; phy@34000 { @@ -1138,6 +1300,70 @@ }; }; + adreno_smmu: arm,smmu@b40000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0xb40000 0x10000>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + + clocks = <&mmcc GPU_AHB_CLK>, + <&gcc GCC_MMSS_BIMC_GFX_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&mmcc GPU_GDSC>; + + status = "disabled"; + }; + + mdp_smmu: arm,smmu@d00000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0xd00000 0x10000>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + clocks = <&mmcc SMMU_MDP_AHB_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&mmcc MDSS_GDSC>; + + status = "disabled"; + }; + + lpass_q6_smmu: arm,smmu-lpass_q6@1600000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x1600000 0x20000>; + #iommu-cells = <1>; + power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>, + <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; + clock-names = "iface", "bus"; + status = "disabled"; + }; + agnoc@0 { power-domains = <&gcc AGGRE0_NOC_GDSC>; compatible = "simple-pm-bus"; @@ -1303,6 +1529,265 @@ "bus_slave"; }; }; + + slimbam:dma@9184000 + { + compatible = "qcom,bam-v1.7.0"; + qcom,controlled-remotely; + reg = <0x9184000 0x32000>; + num-channels = <31>; + interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,num-ees = <2>; + }; + + slim_msm: slim@91c0000 { + compatible = "qcom,slim-ngd-v1.5.0"; + reg = <0x91c0000 0x2C000>; + reg-names = "ctrl"; + interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&slimbam 3>, <&slimbam 4>, + <&slimbam 5>, <&slimbam 6>; + dma-names = "rx", "tx", "tx2", "rx2"; + #address-cells = <1>; + #size-cells = <0>; + ngd@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + + tasha_ifd: tas-ifd { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1{ + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + compatible = "slim217,1a0"; + reg = <1 0>; + + interrupt-parent = <&msmgpio>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + reset-gpios = <&msmgpio 64 0>; + + slim-ifc-dev = <&tasha_ifd>; + + vdd-buck-supply = <&pm8994_s4>; + vdd-buck-sido-supply = <&pm8994_s4>; + vdd-tx-supply = <&pm8994_s4>; + vdd-rx-supply = <&pm8994_s4>; + vdd-io-supply = <&pm8994_s4>; + + #sound-dai-cells = <1>; + }; + }; + }; + + gpu@b00000 { + compatible = "qcom,adreno-530.2", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0xb00000 0x3f000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc GPU_GX_GFX3D_CLK>, + <&mmcc GPU_AHB_CLK>, + <&mmcc GPU_GX_RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_MMSS_BIMC_GFX_CLK>; + + clock-names = "core", + "iface", + "rbbmtimer", + "mem", + "mem_iface"; + + power-domains = <&mmcc GPU_GDSC>; + iommus = <&adreno_smmu 0>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + qcom,gpu-quirk-two-pass-use-wfi; + qcom,gpu-quirk-fault-detect-mask; + + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp-table { + compatible ="operating-points-v2"; + + /* + * 624Mhz and 560Mhz are only available on speed + * bin (1 << 0). All the rest are available on + * all bins of the hardware + */ + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-supported-hw = <0x01>; + }; + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-supported-hw = <0x01>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-supported-hw = <0xFF>; + }; + opp-401800000 { + opp-hz = /bits/ 64 <401800000>; + opp-supported-hw = <0xFF>; + }; + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-supported-hw = <0xFF>; + }; + opp-214000000 { + opp-hz = /bits/ 64 <214000000>; + opp-supported-hw = <0xFF>; + }; + opp-133000000 { + opp-hz = /bits/ 64 <133000000>; + opp-supported-hw = <0xFF>; + }; + }; + + zap-shader { + memory-region = <&zap_shader_region>; + }; + }; + + mdss: mdss@900000 { + compatible = "qcom,mdss"; + + reg = <0x900000 0x1000>, + <0x9b0000 0x1040>, + <0x9b8000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys", + "vbif_nrt_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&mmcc MDSS_AHB_CLK>; + clock-names = "iface_clk"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@901000 { + compatible = "qcom,mdp5"; + reg = <0x901000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface_clk", + "bus_clk", + "core_clk", + "iommu_clk", + "vsync_clk"; + + iommus = <&mdp_smmu 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf3_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + + hdmi: hdmi-tx@9a0000 { + compatible = "qcom,hdmi-tx-8996"; + reg = <0x009a0000 0x50c>, + <0x00070000 0x6158>, + <0x009e0000 0xfff>; + reg-names = "core_physical", + "qfprom_physical", + "hdcp_physical"; + + interrupt-parent = <&mdss>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>, + <&mmcc MDSS_EXTPCLK_CLK>; + clock-names = + "mdp_core_clk", + "iface_clk", + "core_clk", + "alt_iface_clk", + "extp_clk"; + + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_in: endpoint { + remote-endpoint = <&mdp5_intf3_out>; + }; + }; + }; + }; + + hdmi_phy: hdmi-phy@9a0600 { + #phy-cells = <0>; + compatible = "qcom,hdmi-phy-8996"; + reg = <0x9a0600 0x1c4>, + <0x9a0a00 0x124>, + <0x9a0c00 0x124>, + <0x9a0e00 0x124>, + <0x9a1000 0x124>, + <0x9a1200 0x0c8>; + reg-names = "hdmi_pll", + "hdmi_tx_l0", + "hdmi_tx_l1", + "hdmi_tx_l2", + "hdmi_tx_l3", + "hdmi_phy"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&gcc GCC_HDMI_CLKREF_CLK>; + clock-names = "iface_clk", + "ref_clk"; + }; + }; + }; + + sound: sound { }; adsp-pil { @@ -1331,6 +1816,55 @@ mboxes = <&apcs_glb 8>; qcom,smd-edge = <1>; qcom,remote-pid = <2>; + #address-cells = <1>; + #size-cells = <0>; + apr { + power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + reg = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + q6core { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + }; + + q6afe: q6afe { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + hdmi@1 { + reg = <1>; + }; + }; + }; + + q6asm: q6asm { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #sound-dai-cells = <1>; + iommus = <&lpass_q6_smmu 1>; + }; + }; + + q6adm: q6adm { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index f0901067b043..f09f3e03f708 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -15,44 +15,6 @@ stdout-path = "serial0:115200n8"; }; - thermal-zones { - battery-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 0>; - - trips { - battery_crit: trip0 { - temperature = <60000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - skin-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 5>; - - trips { - skin_alert: trip0 { - temperature = <44000>; - hysteresis = <2000>; - type = "passive"; - }; - - skip_crit: trip1 { - temperature = <70000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -111,6 +73,7 @@ vreg_s4a_1p8: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-allow-set-load; }; vreg_s5a_2p04: s5 { regulator-min-microvolt = <1904000>; @@ -195,6 +158,7 @@ vreg_l20a_2p95: l20 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; + regulator-allow-set-load; }; vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; @@ -221,6 +185,7 @@ vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-allow-set-load; }; vreg_l28_3p0: l28 { regulator-min-microvolt = <3008000>; @@ -267,6 +232,25 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; }; +&ufshc { + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; + vdda-phy-max-microamp = <51400>; + vdda-pll-max-microamp = <14600>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; + &usb3 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 3fd0769fe648..574be78a936e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -78,7 +78,6 @@ compatible = "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; - efficiency = <1024>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "arm,arch-cache"; @@ -97,7 +96,6 @@ compatible = "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; - efficiency = <1024>; next-level-cache = <&L2_0>; L1_I_1: l1-icache { compatible = "arm,arch-cache"; @@ -112,7 +110,6 @@ compatible = "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; - efficiency = <1024>; next-level-cache = <&L2_0>; L1_I_2: l1-icache { compatible = "arm,arch-cache"; @@ -127,7 +124,6 @@ compatible = "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; - efficiency = <1024>; next-level-cache = <&L2_0>; L1_I_3: l1-icache { compatible = "arm,arch-cache"; @@ -142,7 +138,6 @@ compatible = "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; - efficiency = <1536>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "arm,arch-cache"; @@ -161,7 +156,6 @@ compatible = "arm,armv8"; reg = <0x0 0x101>; enable-method = "psci"; - efficiency = <1536>; next-level-cache = <&L2_1>; L1_I_101: l1-icache { compatible = "arm,arch-cache"; @@ -176,7 +170,6 @@ compatible = "arm,armv8"; reg = <0x0 0x102>; enable-method = "psci"; - efficiency = <1536>; next-level-cache = <&L2_1>; L1_I_102: l1-icache { compatible = "arm,arch-cache"; @@ -191,7 +184,6 @@ compatible = "arm,armv8"; reg = <0x0 0x103>; enable-method = "psci"; - efficiency = <1536>; next-level-cache = <&L2_1>; L1_I_103: l1-icache { compatible = "arm,arch-cache"; @@ -346,20 +338,20 @@ }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 6>; + thermal-sensors = <&tsens0 1>; trips { - cpu_alert0: trip0 { + cpu0_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit0: trip1 { + cpu0_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -367,20 +359,20 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 7>; + thermal-sensors = <&tsens0 2>; trips { - cpu_alert1: trip0 { + cpu1_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit1: trip1 { + cpu1_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -388,20 +380,20 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 8>; + thermal-sensors = <&tsens0 3>; trips { - cpu_alert2: trip0 { + cpu2_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit2: trip1 { + cpu2_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -409,20 +401,20 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 9>; + thermal-sensors = <&tsens0 4>; trips { - cpu_alert3: trip0 { + cpu3_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit3: trip1 { + cpu3_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -430,20 +422,20 @@ }; }; - cpu-thermal4 { + cpu4-thermal { polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 10>; + thermal-sensors = <&tsens0 7>; trips { - cpu_alert4: trip0 { + cpu4_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit4: trip1 { + cpu4_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -451,20 +443,20 @@ }; }; - cpu-thermal5 { + cpu5-thermal { polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens0 11>; + thermal-sensors = <&tsens0 8>; trips { - cpu_alert5: trip0 { + cpu5_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit5: trip1 { + cpu5_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -472,20 +464,20 @@ }; }; - cpu-thermal6 { + cpu6-thermal { polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens1 0>; + thermal-sensors = <&tsens0 9>; trips { - cpu_alert6: trip0 { + cpu6_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit6: trip1 { + cpu6_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -493,20 +485,20 @@ }; }; - cpu-thermal7 { + cpu7-thermal { polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens1 1>; + thermal-sensors = <&tsens0 10>; trips { - cpu_alert7: trip0 { + cpu7_alert0: trip-point@0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit7: trip1 { + cpu7_crit: cpu_crit { temperature = <110000>; hysteresis = <2000>; type = "critical"; @@ -514,11 +506,169 @@ }; }; - gpu-thermal { + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + gpu1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + gpu2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + clust0-mhm-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_mhm_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + clust1-mhm-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_mhm_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster1-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cluster1_l2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + modem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + mem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens1 3>; + + trips { + wlan_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_dsp_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + multimedia-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + multimedia_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; }; @@ -590,17 +740,19 @@ cell-index = <0>; }; - tsens0: thermal@10aa000 { + tsens0: thermal@10ab000 { compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10aa000 0x2000>; + reg = <0x10ab000 0x1000>, /* TM */ + <0x10aa000 0x1000>; /* SROT */ - #qcom,sensors = <12>; + #qcom,sensors = <14>; #thermal-sensor-cells = <1>; }; - tsens1: thermal@10ad000 { + tsens1: thermal@10ae000 { compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10ad000 0x2000>; + reg = <0x10ae000 0x1000>, /* TM */ + <0x10ad000 0x1000>; /* SROT */ #qcom,sensors = <8>; #thermal-sensor-cells = <1>; @@ -889,7 +1041,7 @@ blsp2_i2c5: i2c@c1ba000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x0c175000 0x600>; + reg = <0x0c1ba000 0x600>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, @@ -983,6 +1135,75 @@ redistributor-stride = <0x0 0x20000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + + ufshc: ufshc@1da4000 { + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x01da4000 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufsphy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_GDSC>; + #reset-cells = <1>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_LN_BB_CLK1>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_BCR>; + reset-names = "rst"; + }; + + ufsphy: phy@1da7000 { + compatible = "qcom,msm8998-qmp-ufs-phy"; + reg = <0x01da7000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock-names = + "ref", + "ref_aux"; + clocks = + <&gcc GCC_UFS_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_AUX_CLK>; + + reset-names = "ufsphy"; + resets = <&ufshc 0>; + + ufsphy_lanes: lanes@1da7400 { + reg = <0x01da7400 0x128>, + <0x01da7600 0x1fc>, + <0x01da7c00 0x1dc>, + <0x01da7800 0x128>, + <0x01da7a00 0x1fc>; + #phy-cells = <0>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index c0ddf128136c..3f97607d8baa 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -15,6 +15,7 @@ compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8005_gpio 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 43cb5ea14089..d3ca35a940fb 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -58,6 +58,8 @@ compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8998_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; #thermal-sensor-cells = <0>; }; @@ -93,6 +95,7 @@ compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8998_gpio 0 0 26>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index 3aee10e3f921..21e05215abe4 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -14,6 +14,7 @@ compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pmi8994_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 051f57e7d6ac..23f9146a161e 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -13,6 +13,7 @@ compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pmi8998_gpio 0 0 14>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 1bb836d1e8aa..e8e186bc1ea7 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -131,4 +131,15 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; }; + + pms405_1: pms405@1 { + compatible = "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pms405_spmi_regulators: regulators { + compatible = "qcom,pms405-regulators"; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts index 2c14903d808e..937eb4555ffe 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts @@ -7,5 +7,6 @@ / { model = "Qualcomm Technologies, Inc. QCS404 EVB 1000"; - compatible = "qcom,qcs404-evb"; + compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", + "qcom,qcs404"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts index 11269ad3de0d..479ad3ac6c28 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts @@ -3,9 +3,92 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "qcs404-evb.dtsi" / { model = "Qualcomm Technologies, Inc. QCS404 EVB 4000"; - compatible = "qcom,qcs404-evb"; + compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb", + "qcom,qcs404"; +}; + +ðernet { + status = "ok"; + + snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 10000>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&phy1>; + phy-mode = "rgmii"; + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "snps,dwmac-mdio"; + phy1: phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + device_type = "ethernet-phy"; + reg = <0x4>; + }; + }; +}; + +&tlmm { + ethernet_defaults: ethernet-defaults { + int { + pins = "gpio61"; + function = "rgmii_int"; + bias-disable; + drive-strength = <2>; + }; + mdc { + pins = "gpio76"; + function = "rgmii_mdc"; + bias-pull-up; + }; + mdio { + pins = "gpio75"; + function = "rgmii_mdio"; + bias-pull-up; + }; + tx { + pins = "gpio67", "gpio66", "gpio65", "gpio64"; + function = "rgmii_tx"; + bias-pull-up; + drive-strength = <16>; + }; + rx { + pins = "gpio73", "gpio72", "gpio71", "gpio70"; + function = "rgmii_rx"; + bias-disable; + drive-strength = <2>; + }; + tx-ctl { + pins = "gpio68"; + function = "rgmii_ctl"; + bias-pull-up; + drive-strength = <16>; + }; + rx-ctl { + pins = "gpio74"; + function = "rgmii_ctl"; + bias-disable; + drive-strength = <2>; + }; + tx-ck { + pins = "gpio63"; + function = "rgmii_ck"; + bias-pull-up; + drive-strength = <16>; + }; + rx-ck { + pins = "gpio69"; + function = "rgmii_ck"; + bias-disable; + drive-strength = <2>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 50b3589c7f15..2c3127167e3c 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -7,6 +7,7 @@ / { aliases { serial0 = &blsp1_uart2; + serial1 = &blsp1_uart3; }; chosen { @@ -19,6 +20,52 @@ regulator-always-on; regulator-boot-on; }; + + vdd_ch0_3p3: + vdd_esmps3_3p3: vdd-esmps3-3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "eSMPS3_3P3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_l6_1p8>; + vddxo-supply = <&vreg_l5_1p8>; + vddrf-supply = <&vreg_l1_1p3>; + vddch0-supply = <&vdd_ch0_3p3>; + + local-bd-address = [ 02 00 00 00 5a ad ]; + + max-speed = <3200000>; + }; +}; + +&blsp1_dma { + qcom,controlled-remotely; +}; + +&blsp2_dma { + qcom,controlled-remotely; +}; + +&pms405_spmi_regulators { + vdd_s3-supply = <&pms405_s3>; + + pms405_s3: s3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd_apc"; + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1352000>; + }; }; &remoteproc_adsp { @@ -37,18 +84,18 @@ pms405-regulators { compatible = "qcom,rpm-pms405-regulators"; - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-l1-l2-supply = <&vreg_s5_1p35>; - vdd-l3-l8-supply = <&vreg_s5_1p35>; - vdd-l4-supply = <&vreg_s5_1p35>; - vdd-l5-l6-supply = <&vreg_s4_1p8>; - vdd-l7-supply = <&vph_pwr>; - vdd-l9-supply = <&vreg_s5_1p35>; - vdd-l10-l11-l12-l13-supply = <&vph_pwr>; + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_l1_l2-supply = <&vreg_s5_1p35>; + vdd_l3_l8-supply = <&vreg_s5_1p35>; + vdd_l4-supply = <&vreg_s5_1p35>; + vdd_l5_l6-supply = <&vreg_s4_1p8>; + vdd_l7-supply = <&vph_pwr>; + vdd_l9-supply = <&vreg_s5_1p35>; + vdd_l10_l11_l12_l13-supply = <&vph_pwr>; vreg_s4_1p8: s4 { regulator-min-microvolt = <1728000>; @@ -56,8 +103,8 @@ }; vreg_s5_1p35: s5 { - regulator-min-microvolt = <>; - regulator-max-microvolt = <>; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; }; vreg_l1_1p3: l1 { @@ -71,7 +118,7 @@ }; vreg_l3_1p05: l3 { - regulator-min-microvolt = <976000>; + regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1160000>; }; @@ -205,3 +252,21 @@ bias-disable; }; }; + +&blsp1_uart3_default { + cts { + pins = "gpio84"; + bias-disable; + }; + + rts-tx { + pins = "gpio85", "gpio82"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio83"; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index e8fd26633d57..ffedf9640af7 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -435,7 +435,6 @@ clocks = <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; - qcom,controlled-remotely = <1>; qcom,ee = <0>; status = "okay"; }; @@ -479,6 +478,27 @@ status = "okay"; }; + ethernet: ethernet@7a80000 { + compatible = "qcom,qcs404-ethqos"; + reg = <0x07a80000 0x10000>, + <0x07a96000 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_ETH_AXI_CLK>, + <&gcc GCC_ETH_SLAVE_AHB_CLK>, + <&gcc GCC_ETH_PTP_CLK>, + <&gcc GCC_ETH_RGMII_CLK>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + snps,tso; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + wifi: wifi@a000000 { compatible = "qcom,wcn3990-wifi"; reg = <0xa000000 0x800000>; @@ -659,7 +679,6 @@ clocks = <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; - qcom,controlled-remotely = <1>; qcom,ee = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index af8c6a2445a2..02b8357c8ce8 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -48,6 +48,10 @@ }; }; +&adsp_pas { + status = "okay"; +}; + &apps_rsc { pm8998-rpmh-regulators { compatible = "qcom,pm8998-rpmh-regulators"; @@ -344,6 +348,10 @@ }; }; +&cdsp_pas { + status = "okay"; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 5308f1671824..fcb93300ca62 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -11,8 +11,10 @@ #include <dt-bindings/clock/qcom,lpass-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sdm845.h> +#include <dt-bindings/interconnect/qcom,sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -73,29 +75,78 @@ #size-cells = <2>; ranges; - memory@85fc0000 { + hyp_mem: memory@85700000 { + reg = <0 0x85700000 0 0x600000>; + no-map; + }; + + xbl_mem: memory@85e00000 { + reg = <0 0x85e00000 0 0x100000>; + no-map; + }; + + aop_mem: memory@85fc0000 { reg = <0 0x85fc0000 0 0x20000>; no-map; }; - memory@85fe0000 { + aop_cmd_db_mem: memory@85fe0000 { compatible = "qcom,cmd-db"; - reg = <0x0 0x85fe0000 0x0 0x20000>; + reg = <0x0 0x85fe0000 0 0x20000>; no-map; }; smem_mem: memory@86000000 { - reg = <0x0 0x86000000 0x0 0x200000>; + reg = <0x0 0x86000000 0 0x200000>; no-map; }; - memory@86200000 { + tz_mem: memory@86200000 { reg = <0 0x86200000 0 0x2d00000>; no-map; }; - wlan_msa_mem: memory@96700000 { - reg = <0 0x96700000 0 0x100000>; + rmtfs_mem: memory@88f00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x88f00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + qseecom_mem: memory@8ab00000 { + reg = <0 0x8ab00000 0 0x1400000>; + no-map; + }; + + camera_mem: memory@8bf00000 { + reg = <0 0x8bf00000 0 0x500000>; + no-map; + }; + + ipa_fw_mem: memory@8c400000 { + reg = <0 0x8c400000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@8c410000 { + reg = <0 0x8c410000 0 0x5000>; + no-map; + }; + + gpu_mem: memory@8c415000 { + reg = <0 0x8c415000 0 0x2000>; + no-map; + }; + + adsp_mem: memory@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + wlan_msa_mem: memory@8df00000 { + reg = <0 0x8df00000 0 0x100000>; no-map; }; @@ -104,10 +155,30 @@ no-map; }; + venus_mem: memory@95800000 { + reg = <0 0x95800000 0 0x500000>; + no-map; + }; + + cdsp_mem: memory@95d00000 { + reg = <0 0x95d00000 0 0x800000>; + no-map; + }; + mba_region: memory@96500000 { reg = <0 0x96500000 0 0x200000>; no-map; }; + + slpi_mem: memory@96700000 { + reg = <0 0x96700000 0 0x1400000>; + no-map; + }; + + spss_mem: memory@97b00000 { + reg = <0 0x97b00000 0 0x100000>; + no-map; + }; }; cpus { @@ -119,6 +190,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_0>; @@ -136,6 +208,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_100>; @@ -150,6 +223,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x200>; enable-method = "psci"; + capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_200>; @@ -164,6 +238,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x300>; enable-method = "psci"; + capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_300>; @@ -178,6 +253,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x400>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_400>; @@ -192,6 +268,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x500>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_500>; @@ -206,6 +283,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x600>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_600>; @@ -220,6 +298,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x700>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_700>; @@ -228,6 +307,44 @@ next-level-cache = <&L3_0>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; }; pmu { @@ -264,6 +381,64 @@ }; }; + adsp_pas: remoteproc-adsp { + compatible = "qcom,sdm845-adsp-pas"; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + }; + }; + + cdsp_pas: remoteproc-cdsp { + compatible = "qcom,sdm845-cdsp-pas"; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + memory-region = <&cdsp_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>; + label = "turing"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + }; + }; + tcsr_mutex: hwlock { compatible = "qcom,tcsr-mutex"; syscon = <&tcsr_mutex_regs 0 0x1000>; @@ -1033,6 +1208,7 @@ phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_PHY_GDSC>; + #reset-cells = <1>; iommus = <&apps_smmu 0x100 0xf>; @@ -1078,6 +1254,8 @@ clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; status = "disabled"; ufs_mem_phy_lanes: lanes@1d87400 { @@ -1853,8 +2031,9 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; status = "disabled"; }; @@ -1919,8 +2098,9 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; status = "disabled"; }; @@ -2098,43 +2278,43 @@ compatible = "operating-points-v2"; rpmhpd_opp_ret: opp1 { - opp-level = <16>; + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; }; rpmhpd_opp_min_svs: opp2 { - opp-level = <48>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; }; rpmhpd_opp_low_svs: opp3 { - opp-level = <64>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; }; rpmhpd_opp_svs: opp4 { - opp-level = <128>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; }; rpmhpd_opp_svs_l1: opp5 { - opp-level = <192>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; }; rpmhpd_opp_nom: opp6 { - opp-level = <256>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; }; rpmhpd_opp_nom_l1: opp7 { - opp-level = <320>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; }; rpmhpd_opp_nom_l2: opp8 { - opp-level = <336>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; }; rpmhpd_opp_turbo: opp9 { - opp-level = <384>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; }; rpmhpd_opp_turbo_l1: opp10 { - opp-level = <416>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; }; }; }; @@ -2611,5 +2791,210 @@ }; }; }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + gpu1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + gpu2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + q6_modem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + mem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + wlan_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + video_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + modem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi index 14db66755a89..aaefc3ae56d5 100644 --- a/arch/arm64/boot/dts/renesas/cat875.dtsi +++ b/arch/arm64/boot/dts/renesas/cat875.dtsi @@ -30,6 +30,18 @@ }; }; +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &pciec0 { status = "okay"; }; @@ -41,4 +53,14 @@ function = "avb"; }; }; + + can0_pins: can0 { + groups = "can0_data"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data"; + function = "can1"; + }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index ef3cff2dd1b6..de282c4794ed 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -879,8 +879,10 @@ "renesas,rcar-gen3-can"; reg = <0 0xe6c30000 0 0x1000>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 916>, <&can_clk>; - clock-names = "clkp1", "can_clk"; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A774A1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 916>; status = "disabled"; @@ -891,8 +893,10 @@ "renesas,rcar-gen3-can"; reg = <0 0xe6c38000 0 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 915>, <&can_clk>; - clock-names = "clkp1", "can_clk"; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A774A1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 915>; status = "disabled"; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index 96ee0d2c6357..013a48c01211 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -22,6 +22,30 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>; + label = "LED0"; + }; + + led1 { + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + label = "LED1"; + }; + + led2 { + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; + label = "LED2"; + }; + + led3 { + gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; + label = "LED3"; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -52,10 +76,33 @@ }; }; +&ehci0 { + dr_mode = "host"; + status = "okay"; +}; + &extal_clk { clock-frequency = <48000000>; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@32 { + compatible = "epson,rx8571"; + reg = <0x32>; + }; +}; + +&ohci0 { + dr_mode = "host"; + status = "okay"; +}; + &pcie_bus_clk { clock-frequency = <100000000>; }; @@ -66,6 +113,11 @@ }; &pfc { + i2c1_pins: i2c1 { + groups = "i2c1_b"; + function = "i2c1"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -84,6 +136,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; @@ -104,3 +161,8 @@ sd-uhs-sdr104; status = "okay"; }; + +&usb2_phy0 { + renesas,no-otg-pins; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 1ea684af99c4..3f86db199dbf 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -76,7 +76,7 @@ power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -87,7 +87,7 @@ power-domains = <&sysc R8A774C0_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; - clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>; + clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -969,8 +969,10 @@ "renesas,rcar-gen3-can"; reg = <0 0xe6c30000 0 0x1000>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 916>, <&can_clk>; - clock-names = "clkp1", "can_clk"; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A774C0_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 916>; status = "disabled"; @@ -981,13 +983,40 @@ "renesas,rcar-gen3-can"; reg = <0 0xe6c38000 0 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 915>, <&can_clk>; - clock-names = "clkp1", "can_clk"; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A774C0_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 915>; status = "disabled"; }; + canfd: can@e66c0000 { + compatible = "renesas,r8a774c0-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A774C0_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; @@ -1740,8 +1769,7 @@ }; csi40: csi2@feaa0000 { - compatible = "renesas,r8a774c0-csi2", - "renesas,rcar-gen3-csi2"; + compatible = "renesas,r8a774c0-csi2"; reg = <0 0xfeaa0000 0 0x10000>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 716>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index abeac3059383..097538cc4b1f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -462,6 +462,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a7795-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7795-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a7795-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a7795-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7795-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -1836,7 +1906,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index b4f9567cb9f8..2aefa53cb16b 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -68,6 +68,7 @@ ports { /* rsnd_port0 is on salvator-common */ rsnd_port1: port@1 { + reg = <1>; rsnd_endpoint1: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts index 31f12059355e..d58ede18108d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts @@ -68,6 +68,7 @@ ports { /* rsnd_port0 is on salvator-common */ rsnd_port1: port@1 { + reg = <1>; rsnd_endpoint1: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index cdf784899cf8..d5e2f4af83a4 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1775,7 +1775,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -2162,17 +2162,6 @@ dma-names = "rx", "tx"; }; }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - }; - port@1 { - reg = <1>; - }; - }; }; audma0: dma-controller@ec700000 { diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 9763d108e183..2554b1742dbf 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -317,6 +317,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77965-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77965-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77965-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77965-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77965-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -1461,7 +1531,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -1585,56 +1655,267 @@ }; }; + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + rcar_sound,ssi { ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; }; ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; }; ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; }; ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; }; ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; }; ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; }; ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; }; @@ -2166,7 +2447,6 @@ du: display@feb00000 { compatible = "renesas,du-r8a77965"; reg = <0 0xfeb00000 0 0x80000>; - reg-names = "du"; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 4081622d548a..a901a341dcf7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -865,6 +865,7 @@ clocks = <&cpg CPG_MOD 811>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 811>; + renesas,id = <0>; status = "disabled"; ports { @@ -892,6 +893,7 @@ clocks = <&cpg CPG_MOD 810>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; status = "disabled"; + renesas,id = <1>; resets = <&cpg 810>; ports { @@ -919,6 +921,7 @@ clocks = <&cpg CPG_MOD 809>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 809>; + renesas,id = <2>; status = "disabled"; ports { @@ -946,6 +949,7 @@ clocks = <&cpg CPG_MOD 808>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 808>; + renesas,id = <3>; status = "disabled"; ports { @@ -973,6 +977,7 @@ clocks = <&cpg CPG_MOD 807>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 807>; + renesas,id = <4>; status = "disabled"; ports { @@ -1000,6 +1005,7 @@ clocks = <&cpg CPG_MOD 806>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 806>; + renesas,id = <5>; status = "disabled"; ports { @@ -1027,6 +1033,7 @@ clocks = <&cpg CPG_MOD 805>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 805>; + renesas,id = <6>; status = "disabled"; ports { @@ -1054,6 +1061,7 @@ clocks = <&cpg CPG_MOD 804>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 804>; + renesas,id = <7>; status = "disabled"; ports { @@ -1081,6 +1089,7 @@ clocks = <&cpg CPG_MOD 628>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 628>; + renesas,id = <8>; status = "disabled"; }; @@ -1091,6 +1100,7 @@ clocks = <&cpg CPG_MOD 627>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 627>; + renesas,id = <9>; status = "disabled"; }; @@ -1101,6 +1111,7 @@ clocks = <&cpg CPG_MOD 625>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 625>; + renesas,id = <10>; status = "disabled"; }; @@ -1111,6 +1122,7 @@ clocks = <&cpg CPG_MOD 618>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 618>; + renesas,id = <11>; status = "disabled"; }; @@ -1121,6 +1133,7 @@ clocks = <&cpg CPG_MOD 612>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 612>; + renesas,id = <12>; status = "disabled"; }; @@ -1131,6 +1144,7 @@ clocks = <&cpg CPG_MOD 608>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 608>; + renesas,id = <13>; status = "disabled"; }; @@ -1141,6 +1155,7 @@ clocks = <&cpg CPG_MOD 605>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 605>; + renesas,id = <14>; status = "disabled"; }; @@ -1151,6 +1166,7 @@ clocks = <&cpg CPG_MOD 604>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 604>; + renesas,id = <15>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 144c0820cf60..c72772589953 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the ebisu board * @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -337,6 +337,15 @@ &i2c0 { status = "okay"; + io_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + }; + hdmi-encoder@39 { compatible = "adi,adv7511w"; reg = <0x39>; @@ -398,7 +407,7 @@ }; port@a { - reg = <0xa>; + reg = <10>; adv7482_txa: endpoint { clock-lanes = <0>; @@ -440,6 +449,28 @@ }; }; +&i2c_dvfs { + status = "okay"; + + clock-frequency = <400000>; + + pmic: pmic@30 { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + rohm,ddr-backup-power = <0x1>; + rohm,rstbmode-level; + }; +}; + &lvds0 { status = "okay"; @@ -458,6 +489,13 @@ }; &lvds1 { + /* + * Even though the LVDS1 output is not connected, the encoder must be + * enabled to supply a pixel clock to the DU for the DPAD output when + * LVDS0 is in use. + */ + status = "okay"; + clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>; @@ -495,6 +533,11 @@ function = "du"; }; + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + pwm3_pins: pwm3 { groups = "pwm3_b"; function = "pwm3"; @@ -650,6 +693,10 @@ status = "okay"; }; +&vin5 { + status = "okay"; +}; + &xhci0 { pinctrl-0 = <&usb30_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index d2ad665fe2d9..56cb566ffa09 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the R-Car E3 (R8A77990) SoC * @@ -284,6 +284,76 @@ status = "disabled"; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a77990-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a77990-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a77990-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a77990-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77990-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -1656,7 +1726,7 @@ }; csi40: csi2@feaa0000 { - compatible = "renesas,r8a77990-csi2", "renesas,rcar-gen3-csi2"; + compatible = "renesas,r8a77990-csi2"; reg = <0 0xfeaa0000 0 0x10000>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 716>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index db2bed1751b8..a7dc11e36fd9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -168,7 +168,6 @@ pinctrl-names = "default"; renesas,no-ether-link; phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { @@ -179,6 +178,18 @@ }; }; +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &du { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; @@ -356,6 +367,13 @@ }; &lvds1 { + /* + * Even though the LVDS1 output is not connected, the encoder must be + * enabled to supply a pixel clock to the DU for the DPAD output when + * LVDS0 is in use. + */ + status = "okay"; + clocks = <&cpg CPG_MOD 727>, <&x12_clk>, <&extal_clk>; @@ -375,6 +393,16 @@ }; }; + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data_a"; + function = "can1"; + }; + du_pins: du { groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; function = "du"; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index a225c2457274..2dba1328acfa 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -29,6 +29,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { aliases { @@ -86,6 +87,63 @@ }; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW4-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW4-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW4-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW4-4"; + wakeup-source; + debounce-interval = <20>; + }; + key-a { + gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + label = "TSW0"; + wakeup-source; + debounce-interval = <20>; + }; + key-b { + gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_B>; + label = "TSW1"; + wakeup-source; + debounce-interval = <20>; + }; + key-c { + gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_C>; + label = "TSW2"; + wakeup-source; + debounce-interval = <20>; + }; + }; + reg_1p8v: regulator0 { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; @@ -572,6 +630,11 @@ function = "intc_ex"; }; + keys_pins: keys { + pins = "GP_5_17", "GP_5_20", "GP_5_22"; + bias-pull-up; + }; + pwm1_pins: pwm1 { groups = "pwm1_a"; function = "pwm1"; @@ -719,6 +782,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif1 { pinctrl-0 = <&scif1_pins>; pinctrl-names = "default"; @@ -857,11 +925,6 @@ status = "okay"; }; -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - &xhci0 { pinctrl-0 = <&usb30_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 1b28fa72ea0b..5f2687acbf94 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 263d7f3dbc44..6eb7407a84aa 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -145,12 +145,12 @@ soc_slppin_slp: soc_slppin_slp { rockchip,pins = - <0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA4 1 &pcfg_pull_none>; }; soc_slppin_rst: soc_slppin_rst { rockchip,pins = - <0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>; + <0 RK_PA4 2 &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index 8302d86d35c4..49c4b96da3d4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -208,7 +208,7 @@ sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = - <1 18 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index 0e34354b2092..5d499c9086fb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -81,18 +81,55 @@ regulator-always-on; regulator-boot-on; }; + + leds { + compatible = "gpio-leds"; + + power { + label = "firefly:blue:power"; + linux,default-trigger = "heartbeat"; + gpios = <&rk805 1 GPIO_ACTIVE_LOW>; + default-state = "on"; + mode = <0x23>; + }; + + user { + label = "firefly:yellow:user"; + linux,default-trigger = "mmc1"; + gpios = <&rk805 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + mode = <0x05>; + }; + }; }; &cpu0 { cpu-supply = <&vdd_arm>; }; +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + &emmc { bus-width = <8>; cap-mmc-highspeed; + max-frequency = <150000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_emmc>; status = "okay"; }; @@ -113,6 +150,14 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + &i2c1 { status = "okay"; @@ -296,3 +341,11 @@ &usb_host0_ohci { status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 79b4d1d4b5d6..7cfd5ca6cc85 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -64,6 +64,27 @@ regulator-max-microvolt = <5000000>; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + }; + + leds { + compatible = "gpio-leds"; + + power { + gpios = <&rk805 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + }; + + standby { + gpios = <&rk805 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + sound { compatible = "audio-graph-card"; label = "rockchip,rk3328"; @@ -156,6 +177,8 @@ interrupts = <6 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <1>; clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; @@ -217,7 +240,7 @@ }; vcc_18: LDO_REG1 { - regulator-name = "vdd_18"; + regulator-name = "vcc_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -229,7 +252,7 @@ }; vcc18_emmc: LDO_REG2 { - regulator-name = "vcc_18emmc"; + regulator-name = "vcc18_emmc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -280,6 +303,12 @@ }; &pinctrl { + ir { + ir_int: ir-int { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index dabef1a21649..994468671b19 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -657,14 +657,17 @@ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI>, - <&cru SCLK_HDMI_SFC>; + <&cru SCLK_HDMI_SFC>, + <&cru SCLK_RTC32K>; clock-names = "iahb", - "isfr"; + "isfr", + "cec"; phys = <&hdmiphy>; phy-names = "hdmi"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>; rockchip,grf = <&grf>; + #sound-dai-cells = <0>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index e96eb62f362b..1c52f47c43a6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -154,60 +154,60 @@ backlight { bl_en: bl-en { - rockchip,pins = <0 20 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; emmc { emmc_bus8: emmc-bus8 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC3 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC4 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC5 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC6 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC7 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD0 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD1 2 &pcfg_pull_up_drv_8ma>; }; emmc-clk { - rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>; }; emmc-cmd { - rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>; }; emmc_reset: emmc-reset { - rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; sdio { wifi_reg_on: wifi-reg-on { - rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_rst: bt-rst { - rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index 8fa550cbd1a4..1d0778ff217c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -233,23 +233,23 @@ &pinctrl { ir { ir_int: ir-int { - rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_sleep: pmic-sleep { - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; pmic_int: pmic-int { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts index fca8e87d8f52..8251f3c0d0a8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts @@ -113,34 +113,34 @@ haikou_pin_hog: haikou-pin-hog { rockchip,pins = /* LID_BTN */ - <RK_GPIO3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */ - <RK_GPIO0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, + <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */ - <RK_GPIO3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, /* BIOS_DISABLE# */ - <RK_GPIO3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { led_sd_haikou: led-sd-gpio { rockchip,pins = - <RK_GPIO0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdmmc { sdmmc_cd_gpio: sdmmc-cd-gpio { rockchip,pins = - <RK_GPIO2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb_otg { otg_vbus_drv: otg-vbus-drv { rockchip,pins = - <RK_GPIO0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index 1b35d612b660..e17311e09082 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -56,8 +56,6 @@ fan: fan@18 { compatible = "ti,amc6821"; reg = <0x18>; - cooling-min-state = <0>; - cooling-max-state = <9>; #cooling-cells = <2>; }; @@ -274,17 +272,17 @@ leds { led_pins_module: led-module-gpio { rockchip,pins = - <RK_GPIO2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, - <RK_GPIO3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, + <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int_l: pmic-int-l { - rockchip,pins = <RK_GPIO0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; pmic_sleep: pmic-sleep { - rockchip,pins = <RK_GPIO0 RK_PA0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index f5aa3cad67c5..6cc310255da8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -226,73 +226,73 @@ emmc { emmc_bus8: emmc-bus8 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC3 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC4 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC5 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC6 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC7 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD0 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD1 2 &pcfg_pull_up_drv_8ma>; }; emmc-clk { - rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>; }; emmc-cmd { - rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>; }; emmc_reset: emmc-reset { - rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>; }; }; leds { stby_pwren: stby-pwren { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; led_ctl: led-ctl { - rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdmmc { sdmmc_clk: sdmmc-clk { - rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none_drv_8ma>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_cd: sdmmc-cd { - rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>; }; sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>, + <2 RK_PA6 1 &pcfg_pull_up_drv_8ma>, + <2 RK_PA7 1 &pcfg_pull_up_drv_8ma>, + <2 RK_PB0 1 &pcfg_pull_up_drv_8ma>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts index 41edcfd53184..231db0305a03 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -218,17 +218,17 @@ &pinctrl { keys { pwr_key: pwr-key { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_sleep: pmic-sleep { - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; pmic_int: pmic-int { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index d34064c65f10..006a1fb6a816 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -235,64 +235,64 @@ emmc { emmc_bus8: emmc-bus8 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, - <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC3 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC4 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC5 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC6 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PC7 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD0 2 &pcfg_pull_up_drv_8ma>, + <1 RK_PD1 2 &pcfg_pull_up_drv_8ma>; }; emmc-clk { - rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>; }; emmc-cmd { - rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>; }; emmc_reset: emmc-reset { - rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; ir { ir_int: ir-int { - rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; keys { pwr_key: pwr-key { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { stby_pwren: stby-pwren { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; led_ctl: led-ctl { - rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio { wifi_reg_on: wifi-reg-on { - rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_rst: bt-rst { - rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 06e7c31d7d07..fd86188010b2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -881,345 +881,345 @@ emmc { emmc_clk: emmc-clk { - rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>; }; emmc_cmd: emmc-cmd { - rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>; }; emmc_pwr: emmc-pwr { - rockchip,pins = <1 27 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>; }; emmc_bus1: emmc-bus1 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>; }; emmc_bus4: emmc-bus4 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, - <1 19 RK_FUNC_2 &pcfg_pull_up>, - <1 20 RK_FUNC_2 &pcfg_pull_up>, - <1 21 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>, + <1 RK_PC3 2 &pcfg_pull_up>, + <1 RK_PC4 2 &pcfg_pull_up>, + <1 RK_PC5 2 &pcfg_pull_up>; }; emmc_bus8: emmc-bus8 { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>, - <1 19 RK_FUNC_2 &pcfg_pull_up>, - <1 20 RK_FUNC_2 &pcfg_pull_up>, - <1 21 RK_FUNC_2 &pcfg_pull_up>, - <1 22 RK_FUNC_2 &pcfg_pull_up>, - <1 23 RK_FUNC_2 &pcfg_pull_up>, - <1 24 RK_FUNC_2 &pcfg_pull_up>, - <1 25 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>, + <1 RK_PC3 2 &pcfg_pull_up>, + <1 RK_PC4 2 &pcfg_pull_up>, + <1 RK_PC5 2 &pcfg_pull_up>, + <1 RK_PC6 2 &pcfg_pull_up>, + <1 RK_PC7 2 &pcfg_pull_up>, + <1 RK_PD0 2 &pcfg_pull_up>, + <1 RK_PD1 2 &pcfg_pull_up>; }; }; gmac { rgmii_pins: rgmii-pins { - rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>, - <3 24 RK_FUNC_1 &pcfg_pull_none>, - <3 19 RK_FUNC_1 &pcfg_pull_none>, - <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 10 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 14 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 28 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 15 RK_FUNC_1 &pcfg_pull_none>, - <3 16 RK_FUNC_1 &pcfg_pull_none>, - <3 17 RK_FUNC_1 &pcfg_pull_none>, - <3 18 RK_FUNC_1 &pcfg_pull_none>, - <3 25 RK_FUNC_1 &pcfg_pull_none>, - <3 20 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PC3 1 &pcfg_pull_none>, + <3 RK_PB0 1 &pcfg_pull_none_12ma>, + <3 RK_PB1 1 &pcfg_pull_none_12ma>, + <3 RK_PB2 1 &pcfg_pull_none_12ma>, + <3 RK_PB6 1 &pcfg_pull_none_12ma>, + <3 RK_PD4 1 &pcfg_pull_none_12ma>, + <3 RK_PB5 1 &pcfg_pull_none_12ma>, + <3 RK_PB7 1 &pcfg_pull_none>, + <3 RK_PC0 1 &pcfg_pull_none>, + <3 RK_PC1 1 &pcfg_pull_none>, + <3 RK_PC2 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PC4 1 &pcfg_pull_none>; }; rmii_pins: rmii-pins { - rockchip,pins = <3 22 RK_FUNC_1 &pcfg_pull_none>, - <3 24 RK_FUNC_1 &pcfg_pull_none>, - <3 19 RK_FUNC_1 &pcfg_pull_none>, - <3 8 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 9 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 13 RK_FUNC_1 &pcfg_pull_none_12ma>, - <3 15 RK_FUNC_1 &pcfg_pull_none>, - <3 16 RK_FUNC_1 &pcfg_pull_none>, - <3 20 RK_FUNC_1 &pcfg_pull_none>, - <3 21 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>, + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PC3 1 &pcfg_pull_none>, + <3 RK_PB0 1 &pcfg_pull_none_12ma>, + <3 RK_PB1 1 &pcfg_pull_none_12ma>, + <3 RK_PB5 1 &pcfg_pull_none_12ma>, + <3 RK_PB7 1 &pcfg_pull_none>, + <3 RK_PC0 1 &pcfg_pull_none>, + <3 RK_PC4 1 &pcfg_pull_none>, + <3 RK_PC5 1 &pcfg_pull_none>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, - <0 7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>, + <0 RK_PA7 1 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { - rockchip,pins = <2 21 RK_FUNC_1 &pcfg_pull_none>, - <2 22 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>, + <2 RK_PC6 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { - rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_none>, - <3 31 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB1 2 &pcfg_pull_none>, + <3 RK_PD7 2 &pcfg_pull_none>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { - rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>, - <1 17 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>, + <1 RK_PC1 1 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { - rockchip,pins = <3 24 RK_FUNC_2 &pcfg_pull_none>, - <3 25 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD0 2 &pcfg_pull_none>, + <3 RK_PD1 2 &pcfg_pull_none>; }; }; i2c5 { i2c5_xfer: i2c5-xfer { - rockchip,pins = <3 26 RK_FUNC_2 &pcfg_pull_none>, - <3 27 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD2 2 &pcfg_pull_none>, + <3 RK_PD3 2 &pcfg_pull_none>; }; }; i2s { i2s_8ch_bus: i2s-8ch-bus { - rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_none>, - <2 13 RK_FUNC_1 &pcfg_pull_none>, - <2 14 RK_FUNC_1 &pcfg_pull_none>, - <2 15 RK_FUNC_1 &pcfg_pull_none>, - <2 16 RK_FUNC_1 &pcfg_pull_none>, - <2 17 RK_FUNC_1 &pcfg_pull_none>, - <2 18 RK_FUNC_1 &pcfg_pull_none>, - <2 19 RK_FUNC_1 &pcfg_pull_none>, - <2 20 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PB4 1 &pcfg_pull_none>, + <2 RK_PB5 1 &pcfg_pull_none>, + <2 RK_PB6 1 &pcfg_pull_none>, + <2 RK_PB7 1 &pcfg_pull_none>, + <2 RK_PC0 1 &pcfg_pull_none>, + <2 RK_PC1 1 &pcfg_pull_none>, + <2 RK_PC2 1 &pcfg_pull_none>, + <2 RK_PC3 1 &pcfg_pull_none>, + <2 RK_PC4 1 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { - rockchip,pins = <3 8 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PB0 2 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { - rockchip,pins = <0 8 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>; }; }; pwm3 { pwm3_pin: pwm3-pin { - rockchip,pins = <3 29 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD5 3 &pcfg_pull_none>; }; }; sdio0 { sdio0_bus1: sdio0-bus1 { - rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>; }; sdio0_bus4: sdio0-bus4 { - rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>, - <2 29 RK_FUNC_1 &pcfg_pull_up>, - <2 30 RK_FUNC_1 &pcfg_pull_up>, - <2 31 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>, + <2 RK_PD5 1 &pcfg_pull_up>, + <2 RK_PD6 1 &pcfg_pull_up>, + <2 RK_PD7 1 &pcfg_pull_up>; }; sdio0_cmd: sdio0-cmd { - rockchip,pins = <3 0 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA0 1 &pcfg_pull_up>; }; sdio0_clk: sdio0-clk { - rockchip,pins = <3 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none>; }; sdio0_cd: sdio0-cd { - rockchip,pins = <3 2 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA2 1 &pcfg_pull_up>; }; sdio0_wp: sdio0-wp { - rockchip,pins = <3 3 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA3 1 &pcfg_pull_up>; }; sdio0_pwr: sdio0-pwr { - rockchip,pins = <3 4 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA4 1 &pcfg_pull_up>; }; sdio0_bkpwr: sdio0-bkpwr { - rockchip,pins = <3 5 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA5 1 &pcfg_pull_up>; }; sdio0_int: sdio0-int { - rockchip,pins = <3 6 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>; }; }; sdmmc { sdmmc_clk: sdmmc-clk { - rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none>; }; sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>; }; sdmmc_cd: sdmmc-cd { - rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>; }; sdmmc_bus1: sdmmc-bus1 { - rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>; }; sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up>, - <2 6 RK_FUNC_1 &pcfg_pull_up>, - <2 7 RK_FUNC_1 &pcfg_pull_up>, - <2 8 RK_FUNC_1 &pcfg_pull_up>; + rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>, + <2 RK_PA6 1 &pcfg_pull_up>, + <2 RK_PA7 1 &pcfg_pull_up>, + <2 RK_PB0 1 &pcfg_pull_up>; }; }; spdif { spdif_tx: spdif-tx { - rockchip,pins = <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>; }; }; spi0 { spi0_clk: spi0-clk { - rockchip,pins = <1 29 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD5 2 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { - rockchip,pins = <1 24 RK_FUNC_3 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD0 3 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { - rockchip,pins = <1 25 RK_FUNC_3 &pcfg_pull_up>; + rockchip,pins = <1 RK_PD1 3 &pcfg_pull_up>; }; spi0_tx: spi0-tx { - rockchip,pins = <1 23 RK_FUNC_3 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC7 3 &pcfg_pull_up>; }; spi0_rx: spi0-rx { - rockchip,pins = <1 22 RK_FUNC_3 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC6 3 &pcfg_pull_up>; }; }; spi1 { spi1_clk: spi1-clk { - rockchip,pins = <1 14 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PB6 2 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { - rockchip,pins = <1 15 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PB7 2 &pcfg_pull_up>; }; spi1_cs1: spi1-cs1 { - rockchip,pins = <3 28 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <3 RK_PD4 2 &pcfg_pull_up>; }; spi1_rx: spi1-rx { - rockchip,pins = <1 16 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC0 2 &pcfg_pull_up>; }; spi1_tx: spi1-tx { - rockchip,pins = <1 17 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <1 RK_PC1 2 &pcfg_pull_up>; }; }; spi2 { spi2_clk: spi2-clk { - rockchip,pins = <0 12 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB4 2 &pcfg_pull_up>; }; spi2_cs0: spi2-cs0 { - rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB5 2 &pcfg_pull_up>; }; spi2_rx: spi2-rx { - rockchip,pins = <0 10 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB2 2 &pcfg_pull_up>; }; spi2_tx: spi2-tx { - rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>; + rockchip,pins = <0 RK_PB3 2 &pcfg_pull_up>; }; }; tsadc { otp_gpio: otp-gpio { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; otp_out: otp-out { - rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>; }; }; uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>, - <2 25 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up>, + <2 RK_PD1 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { - rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { - rockchip,pins = <2 27 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <0 20 RK_FUNC_3 &pcfg_pull_up>, - <0 21 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC4 3 &pcfg_pull_up>, + <0 RK_PC5 3 &pcfg_pull_none>; }; uart1_cts: uart1-cts { - rockchip,pins = <0 22 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC6 3 &pcfg_pull_none>; }; uart1_rts: uart1-rts { - rockchip,pins = <0 23 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PC7 3 &pcfg_pull_none>; }; }; uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <2 6 RK_FUNC_2 &pcfg_pull_up>, - <2 5 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <2 RK_PA6 2 &pcfg_pull_up>, + <2 RK_PA5 2 &pcfg_pull_none>; }; /* no rts / cts for uart2 */ }; uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = <3 29 RK_FUNC_2 &pcfg_pull_up>, - <3 30 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <3 RK_PD5 2 &pcfg_pull_up>, + <3 RK_PD6 3 &pcfg_pull_none>; }; uart3_cts: uart3-cts { - rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none>; }; uart3_rts: uart3-rts { - rockchip,pins = <3 17 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <3 RK_PC1 2 &pcfg_pull_none>; }; }; uart4 { uart4_xfer: uart4-xfer { - rockchip,pins = <0 27 RK_FUNC_3 &pcfg_pull_up>, - <0 26 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD3 3 &pcfg_pull_up>, + <0 RK_PD2 3 &pcfg_pull_none>; }; uart4_cts: uart4-cts { - rockchip,pins = <0 24 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD0 3 &pcfg_pull_none>; }; uart4_rts: uart4-rts { - rockchip,pins = <0 25 RK_FUNC_3 &pcfg_pull_none>; + rockchip,pins = <0 RK_PD1 3 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 959ddc3c7df5..77008dca45bc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -208,19 +208,19 @@ pmic { pmic_int_l: pmic-int-l { rockchip,pins = - <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; pmic_dvs2: pmic-dvs2 { rockchip,pins = - <1 18 RK_FUNC_GPIO &pcfg_pull_down>; + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; }; usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = - <4 25 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts index 027d428917b8..6b059bd7a04f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts @@ -95,53 +95,53 @@ gmac { rgmii_sleep_pins: rgmii-sleep-pins { rockchip,pins = - <3 15 RK_FUNC_GPIO &pcfg_output_low>; + <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; }; }; pcie { pcie_drv: pcie-drv { rockchip,pins = - <1 24 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb2 { host_vbus_drv: host-vbus-drv { rockchip,pins = - <4 27 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; leds { user_led1: user_led1 { rockchip,pins = - <4 25 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; user_led2: user_led2 { rockchip,pins = - <4 26 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; user_led3: user_led3 { rockchip,pins = - <4 30 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; user_led4: user_led4 { rockchip,pins = - <1 0 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_led: wlan_led { rockchip,pins = - <1 1 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_led: bt_led { rockchip,pins = - <1 4 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index d1cf404b8708..a9f4d6d7d2b7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -73,7 +73,7 @@ &pinctrl { tpm { h1_int_od_l: h1-int-od-l { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 931640e9aed4..7cd6d470c1cb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -365,27 +365,27 @@ ap_i2c_tp: &i2c5 { &pinctrl { discrete-regulators { pp1500_en: pp1500-en { - rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; pp1800_audio_en: pp1800-audio-en { - rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; }; pp3000_en: pp3000-en { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; pp3300_disp_en: pp3300-disp-en { - rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_module_pd_l: wlan-module-pd-l { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -393,10 +393,10 @@ ap_i2c_tp: &i2c5 { &wifi { wifi_perst_l: wifi-perst-l { - rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_host_wake_l: wlan-host-wake-l { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 15e254a77391..3e2272b56eb7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -290,24 +290,24 @@ ap_i2c_dig: &i2c2 { digitizer { /* Has external pullup */ cpu1_dig_irq_l: cpu1-dig-irq-l { - rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; /* Has external pullup */ cpu1_dig_pdct_l: cpu1-dig-pdct-l { - rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; discrete-regulators { cpu3_pen_pwr_en: cpu3-pen-pwr-en { - rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pen { cpu1_pen_eject: cpu1-pen-eject { - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 62ea7d6a7d4a..50dfab51f175 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -455,58 +455,58 @@ camera: &i2c7 { /* PINCTRL OVERRIDES */ &ec_ap_int_l { - rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; }; &ap_fw_wp { - rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; &bl_en { - rockchip,pins = <4 21 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; &bt_host_wake_l { - rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; &ec_ap_int_l { - rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; }; &headset_int_l { - rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; }; &i2s0_8ch_bus { rockchip,pins = - <3 24 RK_FUNC_1 &pcfg_pull_none_6ma>, - <3 25 RK_FUNC_1 &pcfg_pull_none_6ma>, - <3 26 RK_FUNC_1 &pcfg_pull_none_6ma>, - <3 27 RK_FUNC_1 &pcfg_pull_none_6ma>, - <3 31 RK_FUNC_1 &pcfg_pull_none_6ma>, - <4 0 RK_FUNC_1 &pcfg_pull_none_6ma>; + <3 RK_PD0 1 &pcfg_pull_none_6ma>, + <3 RK_PD1 1 &pcfg_pull_none_6ma>, + <3 RK_PD2 1 &pcfg_pull_none_6ma>, + <3 RK_PD3 1 &pcfg_pull_none_6ma>, + <3 RK_PD7 1 &pcfg_pull_none_6ma>, + <4 RK_PA0 1 &pcfg_pull_none_6ma>; }; /* there is no external pull up, so need to set this pin pull up */ &sdmmc_cd_gpio { - rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; }; &sd_pwr_1800_sel { - rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; }; &sdmode_en { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; }; &touch_reset_l { - rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>; }; &touch_int_l { - rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; }; &pinctrl { @@ -523,84 +523,84 @@ camera: &i2c7 { camera { pp1250_cam_en: pp1250-dvdd { - rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; pp2800_cam_en: pp2800-avdd { - rockchip,pins = <2 24 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; ucam_rst: ucam_rst { - rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; wcam_rst: wcam_rst { - rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; digitizer { pen_int_odl: pen-int-odl { - rockchip,pins = <1 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; pen_reset_l: pen-reset-l { - rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; discrete-regulators { display_rst_l: display-rst-l { - rockchip,pins = <4 25 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>; }; ppvarp_lcd_en: ppvarp-lcd-en { - rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; ppvarn_lcd_en: ppvarn-lcd-en { - rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; dmic { dmic_en: dmic-en { - rockchip,pins = <4 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pen { pen_eject_odl: pen-eject-odl { - rockchip,pins = <1 1 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; tpm { h1_int_od_l: h1-int-od-l { - rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; &wifi { bt_en_1v8_l: bt-en-1v8-l { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_pd_1v8_l: wlan-pd-1v8-l { - rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; /* Default pull-up, but just to be clear */ wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; wifi_perst_l: wifi-perst-l { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_host_wake_l: wlan-host-wake-l { - rockchip,pins = <1 3 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index da03fa9c5662..dd5624975c9b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -676,29 +676,29 @@ ap_i2c_audio: &i2c8 { backlight-enable { bl_en: bl-en { - rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; cros-ec { ec_ap_int_l: ec-ap-int-l { - rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; discrete-regulators { sd_io_pwr_en: sd-io-pwr-en { - rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; sd_pwr_1800_sel: sd-pwr-1800-sel { - rockchip,pins = <RK_GPIO2 28 RK_FUNC_GPIO + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; sd_slot_pwr_en: sd-slot-pwr-en { - rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO + rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -706,17 +706,17 @@ ap_i2c_audio: &i2c8 { codec { /* Has external pullup */ headset_int_l: headset-int-l { - rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; }; mic_int: mic-int { - rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; }; }; max98357a { sdmode_en: sdmode-en { - rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -727,7 +727,7 @@ ap_i2c_audio: &i2c8 { * to hack this as gpio, so the EP could be able to * de-assert it along and make ClockPM(CPM) work. */ - rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -738,20 +738,20 @@ ap_i2c_audio: &i2c8 { */ sdmmc_bus4: sdmmc-bus4 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 9 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 10 RK_FUNC_1 &pcfg_pull_none_8ma>, - <4 11 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB0 1 &pcfg_pull_none_8ma>, + <4 RK_PB1 1 &pcfg_pull_none_8ma>, + <4 RK_PB2 1 &pcfg_pull_none_8ma>, + <4 RK_PB3 1 &pcfg_pull_none_8ma>; }; sdmmc_clk: sdmmc-clk { rockchip,pins = - <4 12 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB4 1 &pcfg_pull_none_8ma>; }; sdmmc_cmd: sdmmc-cmd { rockchip,pins = - <4 13 RK_FUNC_1 &pcfg_pull_none_8ma>; + <4 RK_PB5 1 &pcfg_pull_none_8ma>; }; /* @@ -765,12 +765,12 @@ ap_i2c_audio: &i2c8 { */ sdmmc_cd: sdmmc-cd { rockchip,pins = - <0 7 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA7 1 &pcfg_pull_none>; }; /* This is where we actually hook up CD; has external pull */ sdmmc_cd_gpio: sdmmc-cd-gpio { - rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -780,47 +780,47 @@ ap_i2c_audio: &i2c8 { * Pull down SPI1 CLK/CS/RX/TX during suspend, to * prevent leakage. */ - rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>, - <1 10 RK_FUNC_GPIO &pcfg_pull_down>, - <1 7 RK_FUNC_GPIO &pcfg_pull_down>, - <1 8 RK_FUNC_GPIO &pcfg_pull_down>; + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>, + <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; }; }; touchscreen { touch_int_l: touch-int-l { - rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; }; touch_reset_l: touch-reset-l { - rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; trackpad { ap_i2c_tp_pu_en: ap-i2c-tp-pu-en { - rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>; }; trackpad_int_l: trackpad-int-l { - rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; wifi: wifi { wlan_module_reset_l: wlan-module-reset-l { - rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { /* Kevin has an external pull up, but Gru does not */ - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; write-protect { ap_fw_wp: ap-fw-wp { - rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts index 84433cf02be9..2a127985ab17 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts @@ -52,13 +52,80 @@ pinctrl-names = "default"; pinctrl-0 = <&ir_rx>; }; + + fan: pwm-fan { + compatible = "pwm-fan"; + /* + * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels + * work out to 0, ~1200, ~3000, and 5000RPM respectively. + */ + cooling-levels = <0 12 18 255>; + #cooling-cells = <2>; + fan-supply = <&vcc12v0_sys>; + pwms = <&pwm1 0 50000 0>; + }; +}; + +&cpu_thermal { + trips { + cpu_warm: cpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { + trip = <&cpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map3 { + trip = <&cpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&gpu_thermal { + trips { + gpu_warm: gpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + gpu_hot: gpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + cooling-maps { + map1 { + trip = <&gpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map2 { + trip = <&gpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; }; &pinctrl { ir { ir_rx: ir-rx { /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */ - rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts new file mode 100644 index 000000000000..195410b089b9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "rk3399-nanopi4.dtsi" + +/ { + model = "FriendlyARM NanoPi NEO4"; + compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399"; + + vdd_5v: vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_core: vcc5v0-core { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_core"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v>; + }; + + vcc5v0_usb1: vcc5v0-usb1 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb1"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&vcc3v3_sys { + vin-supply = <&vcc5v0_core>; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_usb1>; +}; + +&vbus_typec { + regulator-always-on; + vin-supply = <&vdd_5v>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index d325e117287b..dd16c80d923e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -148,15 +148,28 @@ assigned-clocks = <&cru SCLK_RMII_SRC>; clock_in_out = "input"; pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; + pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; + phy-handle = <&rtl8211e>; phy-mode = "rgmii"; phy-supply = <&vcc3v3_s3>; snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; + snps,reset-delays-us = <0 10000 30000>; snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: phy@1 { + reg = <1>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + }; + }; }; &gpu { @@ -481,6 +494,16 @@ }; }; + phy { + phy_intb: phy-intb { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_rstb: phy-rstb { + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { cpu_b_sleep: cpu-b-sleep { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts new file mode 100644 index 000000000000..0541dfce924d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -0,0 +1,790 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; + +#include "dt-bindings/pwm/pwm.h" +#include "dt-bindings/input/input.h" +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Orange Pi RK3399 Board"; + compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <100000>; + }; + + button-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <300000>; + }; + + back { + label = "Back"; + linux,code = <KEY_BACK>; + press-threshold-microvolt = <985000>; + }; + + menu { + label = "Menu"; + linux,code = <KEY_MENU>; + press-threshold-microvolt = <1314000>; + }; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + linux,input-type = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_btn>; + wakeup-source; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc3v0_sd"; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vbus_typec: vbus-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vbus_typec"; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc3v3_s3>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "rtc_clko_soc", "rtc_clko_wifi"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_3v0>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_tp: LDO_REG2 { + regulator-name = "vcc3v0_tp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-name = "vcc1v8_pmupll"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + ak09911@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + vdd-supply = <&vcc3v3_s3>; + vid-supply = <&vcc3v3_s3>; + }; + + mpu6500@68 { + compatible = "invensense,mpu6500"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int_l>; + vddio-supply = <&vcc3v3_s3>; + }; + + lsm6ds3@6a { + compatible = "st,lsm6ds3"; + reg = <0x6a>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gyr_int_l>; + vdd-supply = <&vcc3v3_s3>; + vddio-supply = <&vcc3v3_s3>; + }; + + cm32181@10 { + compatible = "capella,cm32181"; + reg = <0x10>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&light_int_l>; + vdd-supply = <&vcc3v3_s3>; + }; + + fusb302@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&chg_cc_int_l>; + vbus-supply = <&vbus_typec>; + }; +}; + +&io_domains { + status = "okay"; + bt656-supply = <&vcc_3v0>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_3v0>; +}; + +&pinctrl { + buttons { + pwr_btn: pwr-btn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sd { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = + <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_typec_en: vcc5v0-typec-en { + rockchip,pins = + <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + bluetooth { + bt_reg_on_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + mpu6500 { + gsensor_int_l: gsensor-int-l { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lsm6ds3 { + gyr_int_l: gyr-int-l { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + cm32181 { + light_int_l: light-int-l { + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + fusb302 { + chg_cc_int_l: chg-cc-int-l { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + clock-frequency = <50000000>; + disable-wp; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + clock-frequency = <150000000>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v0_sd>; + vqmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vbus_typec>; + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 1e6a71066c16..d80d6b726820 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -168,27 +168,27 @@ haikou_pin_hog: haikou-pin-hog { rockchip,pins = /* LID_BTN */ - <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */ - <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */ - <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, + <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, /* BIOS_DISABLE# */ - <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { led_sd_haikou: led-sd-gpio { rockchip,pins = - <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb2 { otg_vbus_drv: otg-vbus-drv { rockchip,pins = - <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 0130b9f98c9d..62ea288a1a70 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -146,6 +146,7 @@ &emmc_phy { status = "okay"; + drive-impedance-ohm = <33>; }; &gmac { @@ -369,8 +370,6 @@ fan: fan@18 { compatible = "ti,amc6821"; reg = <0x18>; - cooling-min-state = <0>; - cooling-max-state = <9>; #cooling-cells = <2>; }; @@ -413,10 +412,10 @@ */ &i2s0_2ch_bus { rockchip,pins = - <RK_GPIO3 RK_PD0 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 RK_PD2 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 RK_PD3 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 RK_PD7 RK_FUNC_1 &pcfg_pull_none>; + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>; }; &io_domains { @@ -440,29 +439,29 @@ i2c8 { i2c8_xfer_a: i2c8-xfer { rockchip,pins = - <RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC4 1 &pcfg_pull_up>, + <1 RK_PC5 1 &pcfg_pull_up>; }; }; leds { led_pin_module: led-module-gpio { rockchip,pins = - <RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int_l: pmic-int-l { rockchip,pins = - <RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = - <RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts index 844eac939a97..e030627159c6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts @@ -157,6 +157,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index 2927db4dda9d..c7d48d41e184 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -18,6 +18,15 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + vcc1v8_s0: vcc1v8-s0 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_s0"; @@ -26,12 +35,13 @@ regulator-always-on; }; - vcc_sys: vcc-sys { + vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; + regulator-name = "vcc5v0_sys"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; + vin-supply = <&vcc12v_dcin>; }; vcc3v3_sys: vcc3v3-sys { @@ -40,7 +50,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; }; vcc3v3_pcie: vcc3v3-pcie-regulator { @@ -64,7 +74,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; }; }; @@ -96,6 +106,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; @@ -123,7 +138,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; status = "okay"; regulator-state-mem { @@ -141,7 +156,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; }; @@ -159,16 +174,16 @@ #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; vcc12-supply = <&vcc3v3_sys>; vddio-supply = <&vcc_1v8>; @@ -396,62 +411,62 @@ sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>; + <4 RK_PB0 1 &pcfg_pull_up_8ma>; }; sdmmc_bus4: sdmmc-bus4 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>, - <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>; + <4 RK_PB0 1 &pcfg_pull_up_8ma>, + <4 RK_PB1 1 &pcfg_pull_up_8ma>, + <4 RK_PB2 1 &pcfg_pull_up_8ma>, + <4 RK_PB3 1 &pcfg_pull_up_8ma>; }; sdmmc_clk: sdmmc-clk { rockchip,pins = - <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>; + <4 RK_PB4 1 &pcfg_pull_none_18ma>; }; sdmmc_cmd: sdmmc-cmd { rockchip,pins = - <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>; + <4 RK_PB5 1 &pcfg_pull_up_8ma>; }; }; sdio0 { sdio0_bus4: sdio0-bus4 { rockchip,pins = - <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>; + <2 RK_PC4 1 &pcfg_pull_up_20ma>, + <2 RK_PC5 1 &pcfg_pull_up_20ma>, + <2 RK_PC6 1 &pcfg_pull_up_20ma>, + <2 RK_PC7 1 &pcfg_pull_up_20ma>; }; sdio0_cmd: sdio0-cmd { rockchip,pins = - <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>; + <2 RK_PD0 1 &pcfg_pull_up_20ma>; }; sdio0_clk: sdio0-clk { rockchip,pins = - <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>; + <2 RK_PD1 1 &pcfg_pull_none_20ma>; }; }; pmic { pmic_int_l: pmic-int-l { rockchip,pins = - <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; vsel1_gpio: vsel1-gpio { rockchip,pins = - <1 17 RK_FUNC_GPIO &pcfg_pull_down>; + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; vsel2_gpio: vsel2-gpio { rockchip,pins = - <1 14 RK_FUNC_GPIO &pcfg_pull_down>; + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index 1f2394e0587d..20ec7d1c25d7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -222,6 +222,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &gpu { mali-supply = <&vdd_gpu>; status = "okay"; @@ -504,7 +508,7 @@ status = "okay"; bt656-supply = <&vcc1v8_dvp>; - audio-supply = <&vcca1v8_codec>; + audio-supply = <&vcc_3v0>; sdmmc-supply = <&vcc_sdio>; gpio1830-supply = <&vcc_3v0>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 946d3589575a..04623e52ac5d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -471,7 +471,7 @@ fan { motor_pwr: motor-pwr { rockchip,pins = - <RK_GPIO1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -493,7 +493,7 @@ sd { sdmmc0_pwr_h: sdmmc0-pwr-h { rockchip,pins = - <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index db9d948c0b03..196ac9b78076 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -71,6 +71,7 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; @@ -82,6 +83,7 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; @@ -93,6 +95,7 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; @@ -104,6 +107,7 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; + capacity-dmips-mhz = <485>; clocks = <&cru ARMCLKL>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; @@ -115,6 +119,7 @@ compatible = "arm,cortex-a72"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; clocks = <&cru ARMCLKB>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; @@ -126,6 +131,7 @@ compatible = "arm,cortex-a72"; reg = <0x0 0x101>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; clocks = <&cru ARMCLKB>; #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; @@ -333,6 +339,7 @@ phys = <&emmc_phy>; phy-names = "phy_arasan"; power-domains = <&power RK3399_PD_EMMC>; + disable-cqe-dcmd; status = "disabled"; }; @@ -1450,6 +1457,7 @@ clock-names = "refclk"; #phy-cells = <1>; resets = <&cru SRST_PCIEPHY>; + drive-impedance-ohm = <50>; reset-names = "phy"; status = "disabled"; }; @@ -2045,14 +2053,14 @@ clock { clk_32k: clk-32k { - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; }; }; edp { edp_hpd: edp-hpd { rockchip,pins = - <4 23 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC7 2 &pcfg_pull_none>; }; }; @@ -2060,576 +2068,576 @@ rgmii_pins: rgmii-pins { rockchip,pins = /* mac_txclk */ - <3 17 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PC1 1 &pcfg_pull_none_13ma>, /* mac_rxclk */ - <3 14 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB6 1 &pcfg_pull_none>, /* mac_mdio */ - <3 13 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB5 1 &pcfg_pull_none>, /* mac_txen */ - <3 12 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PB4 1 &pcfg_pull_none_13ma>, /* mac_clk */ - <3 11 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB3 1 &pcfg_pull_none>, /* mac_rxdv */ - <3 9 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB1 1 &pcfg_pull_none>, /* mac_mdc */ - <3 8 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB0 1 &pcfg_pull_none>, /* mac_rxd1 */ - <3 7 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA7 1 &pcfg_pull_none>, /* mac_rxd0 */ - <3 6 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA6 1 &pcfg_pull_none>, /* mac_txd1 */ - <3 5 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA5 1 &pcfg_pull_none_13ma>, /* mac_txd0 */ - <3 4 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA4 1 &pcfg_pull_none_13ma>, /* mac_rxd3 */ - <3 3 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA3 1 &pcfg_pull_none>, /* mac_rxd2 */ - <3 2 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA2 1 &pcfg_pull_none>, /* mac_txd3 */ - <3 1 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA1 1 &pcfg_pull_none_13ma>, /* mac_txd2 */ - <3 0 RK_FUNC_1 &pcfg_pull_none_13ma>; + <3 RK_PA0 1 &pcfg_pull_none_13ma>; }; rmii_pins: rmii-pins { rockchip,pins = /* mac_mdio */ - <3 13 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB5 1 &pcfg_pull_none>, /* mac_txen */ - <3 12 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PB4 1 &pcfg_pull_none_13ma>, /* mac_clk */ - <3 11 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB3 1 &pcfg_pull_none>, /* mac_rxer */ - <3 10 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB2 1 &pcfg_pull_none>, /* mac_rxdv */ - <3 9 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB1 1 &pcfg_pull_none>, /* mac_mdc */ - <3 8 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PB0 1 &pcfg_pull_none>, /* mac_rxd1 */ - <3 7 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA7 1 &pcfg_pull_none>, /* mac_rxd0 */ - <3 6 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PA6 1 &pcfg_pull_none>, /* mac_txd1 */ - <3 5 RK_FUNC_1 &pcfg_pull_none_13ma>, + <3 RK_PA5 1 &pcfg_pull_none_13ma>, /* mac_txd0 */ - <3 4 RK_FUNC_1 &pcfg_pull_none_13ma>; + <3 RK_PA4 1 &pcfg_pull_none_13ma>; }; }; i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = - <1 15 RK_FUNC_2 &pcfg_pull_none>, - <1 16 RK_FUNC_2 &pcfg_pull_none>; + <1 RK_PB7 2 &pcfg_pull_none>, + <1 RK_PC0 2 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { rockchip,pins = - <4 2 RK_FUNC_1 &pcfg_pull_none>, - <4 1 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PA2 1 &pcfg_pull_none>, + <4 RK_PA1 1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { rockchip,pins = - <2 1 RK_FUNC_2 &pcfg_pull_none_12ma>, - <2 0 RK_FUNC_2 &pcfg_pull_none_12ma>; + <2 RK_PA1 2 &pcfg_pull_none_12ma>, + <2 RK_PA0 2 &pcfg_pull_none_12ma>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { rockchip,pins = - <4 17 RK_FUNC_1 &pcfg_pull_none>, - <4 16 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC1 1 &pcfg_pull_none>, + <4 RK_PC0 1 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { rockchip,pins = - <1 12 RK_FUNC_1 &pcfg_pull_none>, - <1 11 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PB4 1 &pcfg_pull_none>, + <1 RK_PB3 1 &pcfg_pull_none>; }; }; i2c5 { i2c5_xfer: i2c5-xfer { rockchip,pins = - <3 11 RK_FUNC_2 &pcfg_pull_none>, - <3 10 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB3 2 &pcfg_pull_none>, + <3 RK_PB2 2 &pcfg_pull_none>; }; }; i2c6 { i2c6_xfer: i2c6-xfer { rockchip,pins = - <2 10 RK_FUNC_2 &pcfg_pull_none>, - <2 9 RK_FUNC_2 &pcfg_pull_none>; + <2 RK_PB2 2 &pcfg_pull_none>, + <2 RK_PB1 2 &pcfg_pull_none>; }; }; i2c7 { i2c7_xfer: i2c7-xfer { rockchip,pins = - <2 8 RK_FUNC_2 &pcfg_pull_none>, - <2 7 RK_FUNC_2 &pcfg_pull_none>; + <2 RK_PB0 2 &pcfg_pull_none>, + <2 RK_PA7 2 &pcfg_pull_none>; }; }; i2c8 { i2c8_xfer: i2c8-xfer { rockchip,pins = - <1 21 RK_FUNC_1 &pcfg_pull_none>, - <1 20 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PC5 1 &pcfg_pull_none>, + <1 RK_PC4 1 &pcfg_pull_none>; }; }; i2s0 { i2s0_2ch_bus: i2s0-2ch-bus { rockchip,pins = - <3 24 RK_FUNC_1 &pcfg_pull_none>, - <3 25 RK_FUNC_1 &pcfg_pull_none>, - <3 26 RK_FUNC_1 &pcfg_pull_none>, - <3 27 RK_FUNC_1 &pcfg_pull_none>, - <3 31 RK_FUNC_1 &pcfg_pull_none>, - <4 0 RK_FUNC_1 &pcfg_pull_none>; + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; }; i2s0_8ch_bus: i2s0-8ch-bus { rockchip,pins = - <3 24 RK_FUNC_1 &pcfg_pull_none>, - <3 25 RK_FUNC_1 &pcfg_pull_none>, - <3 26 RK_FUNC_1 &pcfg_pull_none>, - <3 27 RK_FUNC_1 &pcfg_pull_none>, - <3 28 RK_FUNC_1 &pcfg_pull_none>, - <3 29 RK_FUNC_1 &pcfg_pull_none>, - <3 30 RK_FUNC_1 &pcfg_pull_none>, - <3 31 RK_FUNC_1 &pcfg_pull_none>, - <4 0 RK_FUNC_1 &pcfg_pull_none>; + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD4 1 &pcfg_pull_none>, + <3 RK_PD5 1 &pcfg_pull_none>, + <3 RK_PD6 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>, + <4 RK_PA0 1 &pcfg_pull_none>; }; }; i2s1 { i2s1_2ch_bus: i2s1-2ch-bus { rockchip,pins = - <4 3 RK_FUNC_1 &pcfg_pull_none>, - <4 4 RK_FUNC_1 &pcfg_pull_none>, - <4 5 RK_FUNC_1 &pcfg_pull_none>, - <4 6 RK_FUNC_1 &pcfg_pull_none>, - <4 7 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PA3 1 &pcfg_pull_none>, + <4 RK_PA4 1 &pcfg_pull_none>, + <4 RK_PA5 1 &pcfg_pull_none>, + <4 RK_PA6 1 &pcfg_pull_none>, + <4 RK_PA7 1 &pcfg_pull_none>; }; }; sdio0 { sdio0_bus1: sdio0-bus1 { rockchip,pins = - <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PC4 1 &pcfg_pull_up>; }; sdio0_bus4: sdio0-bus4 { rockchip,pins = - <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PC5 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PC6 RK_FUNC_1 &pcfg_pull_up>, - <2 RK_PC7 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PC4 1 &pcfg_pull_up>, + <2 RK_PC5 1 &pcfg_pull_up>, + <2 RK_PC6 1 &pcfg_pull_up>, + <2 RK_PC7 1 &pcfg_pull_up>; }; sdio0_cmd: sdio0-cmd { rockchip,pins = - <2 RK_PD0 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD0 1 &pcfg_pull_up>; }; sdio0_clk: sdio0-clk { rockchip,pins = - <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PD1 1 &pcfg_pull_none>; }; sdio0_cd: sdio0-cd { rockchip,pins = - <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD2 1 &pcfg_pull_up>; }; sdio0_pwr: sdio0-pwr { rockchip,pins = - <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD3 1 &pcfg_pull_up>; }; sdio0_bkpwr: sdio0-bkpwr { rockchip,pins = - <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PD4 1 &pcfg_pull_up>; }; sdio0_wp: sdio0-wp { rockchip,pins = - <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PA3 1 &pcfg_pull_up>; }; sdio0_int: sdio0-int { rockchip,pins = - <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PA4 1 &pcfg_pull_up>; }; }; sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins = - <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB0 1 &pcfg_pull_up>; }; sdmmc_bus4: sdmmc-bus4 { rockchip,pins = - <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>, - <4 RK_PB1 RK_FUNC_1 &pcfg_pull_up>, - <4 RK_PB2 RK_FUNC_1 &pcfg_pull_up>, - <4 RK_PB3 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB0 1 &pcfg_pull_up>, + <4 RK_PB1 1 &pcfg_pull_up>, + <4 RK_PB2 1 &pcfg_pull_up>, + <4 RK_PB3 1 &pcfg_pull_up>; }; sdmmc_clk: sdmmc-clk { rockchip,pins = - <4 RK_PB4 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PB4 1 &pcfg_pull_none>; }; sdmmc_cmd: sdmmc-cmd { rockchip,pins = - <4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB5 1 &pcfg_pull_up>; }; sdmmc_cd: sdmmc-cd { rockchip,pins = - <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PA7 1 &pcfg_pull_up>; }; sdmmc_wp: sdmmc-wp { rockchip,pins = - <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PB0 1 &pcfg_pull_up>; }; }; sleep { ap_pwroff: ap-pwroff { - rockchip,pins = <1 5 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>; }; ddrio_pwroff: ddrio-pwroff { - rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>; }; }; spdif { spdif_bus: spdif-bus { rockchip,pins = - <4 21 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC5 1 &pcfg_pull_none>; }; spdif_bus_1: spdif-bus-1 { rockchip,pins = - <3 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; + <3 RK_PC0 3 &pcfg_pull_none>; }; }; spi0 { spi0_clk: spi0-clk { rockchip,pins = - <3 6 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA6 2 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { rockchip,pins = - <3 7 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA7 2 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { rockchip,pins = - <3 8 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PB0 2 &pcfg_pull_up>; }; spi0_tx: spi0-tx { rockchip,pins = - <3 5 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA5 2 &pcfg_pull_up>; }; spi0_rx: spi0-rx { rockchip,pins = - <3 4 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA4 2 &pcfg_pull_up>; }; }; spi1 { spi1_clk: spi1-clk { rockchip,pins = - <1 9 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB1 2 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { rockchip,pins = - <1 10 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB2 2 &pcfg_pull_up>; }; spi1_rx: spi1-rx { rockchip,pins = - <1 7 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PA7 2 &pcfg_pull_up>; }; spi1_tx: spi1-tx { rockchip,pins = - <1 8 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB0 2 &pcfg_pull_up>; }; }; spi2 { spi2_clk: spi2-clk { rockchip,pins = - <2 11 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB3 1 &pcfg_pull_up>; }; spi2_cs0: spi2-cs0 { rockchip,pins = - <2 12 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB4 1 &pcfg_pull_up>; }; spi2_rx: spi2-rx { rockchip,pins = - <2 9 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB1 1 &pcfg_pull_up>; }; spi2_tx: spi2-tx { rockchip,pins = - <2 10 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB2 1 &pcfg_pull_up>; }; }; spi3 { spi3_clk: spi3-clk { rockchip,pins = - <1 17 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC1 1 &pcfg_pull_up>; }; spi3_cs0: spi3-cs0 { rockchip,pins = - <1 18 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC2 1 &pcfg_pull_up>; }; spi3_rx: spi3-rx { rockchip,pins = - <1 15 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PB7 1 &pcfg_pull_up>; }; spi3_tx: spi3-tx { rockchip,pins = - <1 16 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC0 1 &pcfg_pull_up>; }; }; spi4 { spi4_clk: spi4-clk { rockchip,pins = - <3 2 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA2 2 &pcfg_pull_up>; }; spi4_cs0: spi4-cs0 { rockchip,pins = - <3 3 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA3 2 &pcfg_pull_up>; }; spi4_rx: spi4-rx { rockchip,pins = - <3 0 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA0 2 &pcfg_pull_up>; }; spi4_tx: spi4-tx { rockchip,pins = - <3 1 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA1 2 &pcfg_pull_up>; }; }; spi5 { spi5_clk: spi5-clk { rockchip,pins = - <2 22 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC6 2 &pcfg_pull_up>; }; spi5_cs0: spi5-cs0 { rockchip,pins = - <2 23 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC7 2 &pcfg_pull_up>; }; spi5_rx: spi5-rx { rockchip,pins = - <2 20 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC4 2 &pcfg_pull_up>; }; spi5_tx: spi5-tx { rockchip,pins = - <2 21 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC5 2 &pcfg_pull_up>; }; }; testclk { test_clkout0: test-clkout0 { rockchip,pins = - <0 0 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA0 1 &pcfg_pull_none>; }; test_clkout1: test-clkout1 { rockchip,pins = - <2 25 RK_FUNC_2 &pcfg_pull_none>; + <2 RK_PD1 2 &pcfg_pull_none>; }; test_clkout2: test-clkout2 { rockchip,pins = - <0 8 RK_FUNC_3 &pcfg_pull_none>; + <0 RK_PB0 3 &pcfg_pull_none>; }; }; tsadc { otp_gpio: otp-gpio { - rockchip,pins = <1 6 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; otp_out: otp-out { - rockchip,pins = <1 6 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>; }; }; uart0 { uart0_xfer: uart0-xfer { rockchip,pins = - <2 16 RK_FUNC_1 &pcfg_pull_up>, - <2 17 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC0 1 &pcfg_pull_up>, + <2 RK_PC1 1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { rockchip,pins = - <2 18 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC2 1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { rockchip,pins = - <2 19 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC3 1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { rockchip,pins = - <3 12 RK_FUNC_2 &pcfg_pull_up>, - <3 13 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB4 2 &pcfg_pull_up>, + <3 RK_PB5 2 &pcfg_pull_none>; }; }; uart2a { uart2a_xfer: uart2a-xfer { rockchip,pins = - <4 8 RK_FUNC_2 &pcfg_pull_up>, - <4 9 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PB0 2 &pcfg_pull_up>, + <4 RK_PB1 2 &pcfg_pull_none>; }; }; uart2b { uart2b_xfer: uart2b-xfer { rockchip,pins = - <4 16 RK_FUNC_2 &pcfg_pull_up>, - <4 17 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC0 2 &pcfg_pull_up>, + <4 RK_PC1 2 &pcfg_pull_none>; }; }; uart2c { uart2c_xfer: uart2c-xfer { rockchip,pins = - <4 19 RK_FUNC_1 &pcfg_pull_up>, - <4 20 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC3 1 &pcfg_pull_up>, + <4 RK_PC4 1 &pcfg_pull_none>; }; }; uart3 { uart3_xfer: uart3-xfer { rockchip,pins = - <3 14 RK_FUNC_2 &pcfg_pull_up>, - <3 15 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB6 2 &pcfg_pull_up>, + <3 RK_PB7 2 &pcfg_pull_none>; }; uart3_cts: uart3-cts { rockchip,pins = - <3 18 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PC0 2 &pcfg_pull_none>; }; uart3_rts: uart3-rts { rockchip,pins = - <3 19 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PC1 2 &pcfg_pull_none>; }; }; uart4 { uart4_xfer: uart4-xfer { rockchip,pins = - <1 7 RK_FUNC_1 &pcfg_pull_up>, - <1 8 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PA7 1 &pcfg_pull_up>, + <1 RK_PB0 1 &pcfg_pull_none>; }; }; uarthdcp { uarthdcp_xfer: uarthdcp-xfer { rockchip,pins = - <4 21 RK_FUNC_2 &pcfg_pull_up>, - <4 22 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC5 2 &pcfg_pull_up>, + <4 RK_PC6 2 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = - <4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC2 1 &pcfg_pull_none>; }; pwm0_pin_pull_down: pwm0-pin-pull-down { rockchip,pins = - <4 RK_PC2 RK_FUNC_1 &pcfg_pull_down>; + <4 RK_PC2 1 &pcfg_pull_down>; }; vop0_pwm_pin: vop0-pwm-pin { rockchip,pins = - <4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC2 2 &pcfg_pull_none>; }; vop1_pwm_pin: vop1-pwm-pin { rockchip,pins = - <4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; + <4 RK_PC2 3 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { rockchip,pins = - <4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC6 1 &pcfg_pull_none>; }; pwm1_pin_pull_down: pwm1-pin-pull-down { rockchip,pins = - <4 RK_PC6 RK_FUNC_1 &pcfg_pull_down>; + <4 RK_PC6 1 &pcfg_pull_down>; }; }; pwm2 { pwm2_pin: pwm2-pin { rockchip,pins = - <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PC3 1 &pcfg_pull_none>; }; pwm2_pin_pull_down: pwm2-pin-pull-down { rockchip,pins = - <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>; + <1 RK_PC3 1 &pcfg_pull_down>; }; }; pwm3a { pwm3a_pin: pwm3a-pin { rockchip,pins = - <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA6 1 &pcfg_pull_none>; }; }; pwm3b { pwm3b_pin: pwm3b-pin { rockchip,pins = - <1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PB6 1 &pcfg_pull_none>; }; }; hdmi { hdmi_i2c_xfer: hdmi-i2c-xfer { rockchip,pins = - <4 RK_PC1 RK_FUNC_3 &pcfg_pull_none>, - <4 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; + <4 RK_PC1 3 &pcfg_pull_none>, + <4 RK_PC0 3 &pcfg_pull_none>; }; hdmi_cec: hdmi-cec { rockchip,pins = - <4 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC7 1 &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index 11cc67184fa9..2421ec71a201 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -89,6 +89,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index cef81671f3ab..2a3b66547c6d 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -110,6 +110,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts index af4d86882a5c..1780ed237daf 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts @@ -21,6 +21,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; /* Cleanup from RevA */ /delete-node/ phy@21; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts index d4ad19a38c93..8f456146409f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -55,6 +55,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 94cf5094df64..93ce7eb81498 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -111,6 +111,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index 460adc378295..8bb0001a026f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -106,6 +106,7 @@ ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; }; }; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 9a8718bbf6ba..f500dab60892 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -29,6 +29,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y +CONFIG_ARCH_AGILEX=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_BCM2835=y @@ -46,15 +47,6 @@ CONFIG_ARCH_MVEBU=y CONFIG_ARCH_MXC=y CONFIG_ARCH_QCOM=y CONFIG_ARCH_RENESAS=y -CONFIG_ARCH_R8A774A1=y -CONFIG_ARCH_R8A774C0=y -CONFIG_ARCH_R8A7795=y -CONFIG_ARCH_R8A7796=y -CONFIG_ARCH_R8A77965=y -CONFIG_ARCH_R8A77970=y -CONFIG_ARCH_R8A77980=y -CONFIG_ARCH_R8A77990=y -CONFIG_ARCH_R8A77995=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SEATTLE=y CONFIG_ARCH_STRATIX10=y @@ -68,25 +60,6 @@ CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_XGENE=y CONFIG_ARCH_ZX=y CONFIG_ARCH_ZYNQMP=y -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_IOV=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_PCI_AARDVARK=y -CONFIG_PCI_TEGRA=y -CONFIG_PCIE_RCAR=y -CONFIG_PCI_HOST_GENERIC=y -CONFIG_PCI_XGENE=y -CONFIG_PCI_HOST_THUNDER_PEM=y -CONFIG_PCI_HOST_THUNDER_ECAM=y -CONFIG_PCIE_ROCKCHIP_HOST=m -CONFIG_PCI_LAYERSCAPE=y -CONFIG_PCI_HISI=y -CONFIG_PCIE_QCOM=y -CONFIG_PCIE_ARMADA_8K=y -CONFIG_PCIE_KIRIN=y -CONFIG_PCIE_HISI_STB=y CONFIG_ARM64_VA_BITS_48=y CONFIG_SCHED_MC=y CONFIG_NUMA=y @@ -112,6 +85,7 @@ CONFIG_ARM_SCPI_CPUFREQ=y CONFIG_ARM_TEGRA186_CPUFREQ=y CONFIG_ARM_SCPI_PROTOCOL=y CONFIG_RASPBERRYPI_FIRMWARE=y +CONFIG_INTEL_STRATIX10_SERVICE=y CONFIG_TI_SCI_PROTOCOL=y CONFIG_EFI_CAPSULE_LOADER=y CONFIG_IMX_SCU=y @@ -196,11 +170,30 @@ CONFIG_MAC80211_LEDS=y CONFIG_RFKILL=m CONFIG_NET_9P=y CONFIG_NET_9P_VIRTIO=y +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_IOV=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +CONFIG_PCI_AARDVARK=y +CONFIG_PCI_TEGRA=y +CONFIG_PCIE_RCAR=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCI_XGENE=y +CONFIG_PCIE_ALTERA=y +CONFIG_PCIE_ALTERA_MSI=y +CONFIG_PCI_HOST_THUNDER_PEM=y +CONFIG_PCI_HOST_THUNDER_ECAM=y +CONFIG_PCIE_ROCKCHIP_HOST=m +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCI_HISI=y +CONFIG_PCIE_QCOM=y +CONFIG_PCIE_ARMADA_8K=y +CONFIG_PCIE_KIRIN=y +CONFIG_PCIE_HISI_STB=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=32 CONFIG_HISILICON_LPC=y CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y @@ -222,10 +215,10 @@ CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_HISI_SAS=y CONFIG_SCSI_HISI_SAS_PCI=y -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PLATFORM=m +CONFIG_SCSI_UFSHCD=y +CONFIG_SCSI_UFSHCD_PLATFORM=y CONFIG_SCSI_UFS_QCOM=m -CONFIG_SCSI_UFS_HISI=m +CONFIG_SCSI_UFS_HISI=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y @@ -364,6 +357,7 @@ CONFIG_SPI=y CONFIG_SPI_ARMADA_3700=y CONFIG_SPI_BCM2835=m CONFIG_SPI_BCM2835AUX=m +CONFIG_SPI_NXP_FLEXSPI=y CONFIG_SPI_MESON_SPICC=m CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_ORION=y @@ -372,7 +366,7 @@ CONFIG_SPI_ROCKCHIP=y CONFIG_SPI_QUP=y CONFIG_SPI_S3C64XX=y CONFIG_SPI_SPIDEV=m -CONFIG_SPI_NXP_FLEXSPI=y +CONFIG_SPI_SUN6I=y CONFIG_SPMI=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_MAX77620=y @@ -387,7 +381,6 @@ CONFIG_PINCTRL_QCS404=y CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_SDM845=y -CONFIG_PINCTRL_MTK_MOORE=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_PL061=y @@ -408,6 +401,7 @@ CONFIG_BATTERY_SBS=m CONFIG_BATTERY_BQ27XXX=y CONFIG_SENSORS_ARM_SCPI=y CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_SENSORS_INA2XX=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y @@ -472,14 +466,14 @@ CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_V4L2_SUBDEV_API=y # CONFIG_DVB_NET is not set -CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_SUN6I_CSI=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m -CONFIG_VIDEO_SUN6I_CSI=m CONFIG_VIDEO_RENESAS_FCP=m CONFIG_VIDEO_RENESAS_VSP1=m CONFIG_DRM=m @@ -498,7 +492,6 @@ CONFIG_ROCKCHIP_DW_HDMI=y CONFIG_ROCKCHIP_DW_MIPI_DSI=y CONFIG_ROCKCHIP_INNO_HDMI=y CONFIG_DRM_RCAR_DU=m -CONFIG_DRM_RCAR_LVDS=m CONFIG_DRM_SUN4I=m CONFIG_DRM_SUN8I_DW_HDMI=m CONFIG_DRM_SUN8I_MIXER=m @@ -513,7 +506,6 @@ CONFIG_DRM_MESON=m CONFIG_DRM_PL111=m CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PWM=m CONFIG_BACKLIGHT_LP855X=m @@ -522,22 +514,24 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_SOUND=y CONFIG_SND=y +CONFIG_SND_HDA_TEGRA=m +CONFIG_SND_HDA_CODEC_HDMI=m CONFIG_SND_SOC=y CONFIG_SND_BCM2835_SOC_I2S=m +CONFIG_SND_MESON_AXG_SOUND_CARD=m CONFIG_SND_SOC_ROCKCHIP=m CONFIG_SND_SOC_ROCKCHIP_SPDIF=m CONFIG_SND_SOC_ROCKCHIP_RT5645=m CONFIG_SND_SOC_RK3399_GRU_SOUND=m -CONFIG_SND_MESON_AXG_SOUND_CARD=m CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_AK4613=m -CONFIG_SND_SOC_PCM3168A_I2C=m -CONFIG_SND_SIMPLE_CARD=m -CONFIG_SND_AUDIO_GRAPH_CARD=m CONFIG_SND_SOC_ES7134=m CONFIG_SND_SOC_ES7241=m +CONFIG_SND_SOC_PCM3168A_I2C=m CONFIG_SND_SOC_TAS571X=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_SND_AUDIO_GRAPH_CARD=m CONFIG_I2C_HID=m CONFIG_USB=y CONFIG_USB_OTG=y @@ -605,6 +599,7 @@ CONFIG_EDAC_GHES=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m +CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_EFI=y @@ -619,6 +614,7 @@ CONFIG_RTC_DRV_XGENE=y CONFIG_DMADEVICES=y CONFIG_DMA_BCM2835=m CONFIG_K3_DMA=y +CONFIG_MV_XOR=y CONFIG_MV_XOR_V2=y CONFIG_PL330_DMA=y CONFIG_TEGRA20_APB_DMA=y @@ -676,7 +672,6 @@ CONFIG_RPMSG_QCOM_GLINK_RPM=y CONFIG_RPMSG_QCOM_GLINK_SMEM=m CONFIG_RPMSG_QCOM_SMD=y CONFIG_RASPBERRYPI_POWER=y -CONFIG_IMX_GPCV2_PM_DOMAINS=y CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GENI_SE=y CONFIG_QCOM_GLINK_SSR=m @@ -685,6 +680,15 @@ CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y +CONFIG_ARCH_R8A774A1=y +CONFIG_ARCH_R8A774C0=y +CONFIG_ARCH_R8A7795=y +CONFIG_ARCH_R8A7796=y +CONFIG_ARCH_R8A77965=y +CONFIG_ARCH_R8A77970=y +CONFIG_ARCH_R8A77980=y +CONFIG_ARCH_R8A77990=y +CONFIG_ARCH_R8A77995=y CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_ARCH_TEGRA_132_SOC=y CONFIG_ARCH_TEGRA_210_SOC=y @@ -740,6 +744,12 @@ CONFIG_QCOM_QFPROM=y CONFIG_ROCKCHIP_EFUSE=y CONFIG_UNIPHIER_EFUSE=y CONFIG_MESON_EFUSE=m +CONFIG_FPGA=y +CONFIG_FPGA_MGR_STRATIX10_SOC=m +CONFIG_FPGA_BRIDGE=m +CONFIG_ALTERA_FREEZE_BRIDGE=m +CONFIG_FPGA_REGION=m +CONFIG_OF_FPGA_REGION=m CONFIG_TEE=y CONFIG_OPTEE=y CONFIG_EXT2_FS=y @@ -770,6 +780,8 @@ CONFIG_NLS_ISO8859_1=y CONFIG_SECURITY=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=32 CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c index cc6d06c1b2c7..db271b705529 100644 --- a/drivers/ata/pata_ep93xx.c +++ b/drivers/ata/pata_ep93xx.c @@ -44,7 +44,7 @@ #include <linux/ktime.h> #include <linux/platform_data/dma-ep93xx.h> -#include <mach/platform.h> +#include <linux/soc/cirrus/ep93xx.h> #define DRV_NAME "ep93xx-ide" #define DRV_VERSION "1.0" diff --git a/drivers/bus/tegra-aconnect.c b/drivers/bus/tegra-aconnect.c index 084ae286fa23..ac58142301f4 100644 --- a/drivers/bus/tegra-aconnect.c +++ b/drivers/bus/tegra-aconnect.c @@ -12,28 +12,38 @@ #include <linux/module.h> #include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/pm_clock.h> #include <linux/pm_runtime.h> +struct tegra_aconnect { + struct clk *ape_clk; + struct clk *apb2ape_clk; +}; + static int tegra_aconnect_probe(struct platform_device *pdev) { - int ret; + struct tegra_aconnect *aconnect; if (!pdev->dev.of_node) return -EINVAL; - ret = pm_clk_create(&pdev->dev); - if (ret) - return ret; + aconnect = devm_kzalloc(&pdev->dev, sizeof(struct tegra_aconnect), + GFP_KERNEL); + if (!aconnect) + return -ENOMEM; - ret = of_pm_clk_add_clk(&pdev->dev, "ape"); - if (ret) - goto clk_destroy; + aconnect->ape_clk = devm_clk_get(&pdev->dev, "ape"); + if (IS_ERR(aconnect->ape_clk)) { + dev_err(&pdev->dev, "Can't retrieve ape clock\n"); + return PTR_ERR(aconnect->ape_clk); + } - ret = of_pm_clk_add_clk(&pdev->dev, "apb2ape"); - if (ret) - goto clk_destroy; + aconnect->apb2ape_clk = devm_clk_get(&pdev->dev, "apb2ape"); + if (IS_ERR(aconnect->apb2ape_clk)) { + dev_err(&pdev->dev, "Can't retrieve apb2ape clock\n"); + return PTR_ERR(aconnect->apb2ape_clk); + } + dev_set_drvdata(&pdev->dev, aconnect); pm_runtime_enable(&pdev->dev); of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); @@ -41,35 +51,51 @@ static int tegra_aconnect_probe(struct platform_device *pdev) dev_info(&pdev->dev, "Tegra ACONNECT bus registered\n"); return 0; - -clk_destroy: - pm_clk_destroy(&pdev->dev); - - return ret; } static int tegra_aconnect_remove(struct platform_device *pdev) { pm_runtime_disable(&pdev->dev); - pm_clk_destroy(&pdev->dev); - return 0; } static int tegra_aconnect_runtime_resume(struct device *dev) { - return pm_clk_resume(dev); + struct tegra_aconnect *aconnect = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(aconnect->ape_clk); + if (ret) { + dev_err(dev, "ape clk_enable failed: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(aconnect->apb2ape_clk); + if (ret) { + clk_disable_unprepare(aconnect->ape_clk); + dev_err(dev, "apb2ape clk_enable failed: %d\n", ret); + return ret; + } + + return 0; } static int tegra_aconnect_runtime_suspend(struct device *dev) { - return pm_clk_suspend(dev); + struct tegra_aconnect *aconnect = dev_get_drvdata(dev); + + clk_disable_unprepare(aconnect->ape_clk); + clk_disable_unprepare(aconnect->apb2ape_clk); + + return 0; } static const struct dev_pm_ops tegra_aconnect_pm_ops = { SET_RUNTIME_PM_OPS(tegra_aconnect_runtime_suspend, tegra_aconnect_runtime_resume, NULL) + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) }; static const struct of_device_id tegra_aconnect_of_match[] = { diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index d299ec79e4c3..308475ed4b32 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -47,7 +47,10 @@ enum sysc_clocks { SYSC_MAX_CLOCKS, }; -static const char * const clock_names[SYSC_ICK + 1] = { "fck", "ick", }; +static const char * const clock_names[SYSC_MAX_CLOCKS] = { + "fck", "ick", "opt0", "opt1", "opt2", "opt3", "opt4", + "opt5", "opt6", "opt7", +}; #define SYSC_IDLEMODE_MASK 3 #define SYSC_CLOCKACTIVITY_MASK 3 @@ -75,6 +78,7 @@ struct sysc { u32 module_size; void __iomem *module_va; int offsets[SYSC_MAX_REGS]; + struct ti_sysc_module_data *mdata; struct clk **clocks; const char **clock_roles; int nr_clocks; @@ -94,7 +98,7 @@ struct sysc { static void sysc_parse_dts_quirks(struct sysc *ddata, struct device_node *np, bool is_child); -void sysc_write(struct sysc *ddata, int offset, u32 value) +static void sysc_write(struct sysc *ddata, int offset, u32 value) { writel_relaxed(value, ddata->module_va + offset); } @@ -128,6 +132,81 @@ static u32 sysc_read_revision(struct sysc *ddata) return sysc_read(ddata, offset); } +static int sysc_add_named_clock_from_child(struct sysc *ddata, + const char *name, + const char *optfck_name) +{ + struct device_node *np = ddata->dev->of_node; + struct device_node *child; + struct clk_lookup *cl; + struct clk *clock; + const char *n; + + if (name) + n = name; + else + n = optfck_name; + + /* Does the clock alias already exist? */ + clock = of_clk_get_by_name(np, n); + if (!IS_ERR(clock)) { + clk_put(clock); + + return 0; + } + + child = of_get_next_available_child(np, NULL); + if (!child) + return -ENODEV; + + clock = devm_get_clk_from_child(ddata->dev, child, name); + if (IS_ERR(clock)) + return PTR_ERR(clock); + + /* + * Use clkdev_add() instead of clkdev_alloc() to avoid the MAX_DEV_ID + * limit for clk_get(). If cl ever needs to be freed, it should be done + * with clkdev_drop(). + */ + cl = kcalloc(1, sizeof(*cl), GFP_KERNEL); + if (!cl) + return -ENOMEM; + + cl->con_id = n; + cl->dev_id = dev_name(ddata->dev); + cl->clk = clock; + clkdev_add(cl); + + clk_put(clock); + + return 0; +} + +static int sysc_init_ext_opt_clock(struct sysc *ddata, const char *name) +{ + const char *optfck_name; + int error, index; + + if (ddata->nr_clocks < SYSC_OPTFCK0) + index = SYSC_OPTFCK0; + else + index = ddata->nr_clocks; + + if (name) + optfck_name = name; + else + optfck_name = clock_names[index]; + + error = sysc_add_named_clock_from_child(ddata, name, optfck_name); + if (error) + return error; + + ddata->clock_roles[index] = optfck_name; + ddata->nr_clocks++; + + return 0; +} + static int sysc_get_one_clock(struct sysc *ddata, const char *name) { int error, i, index = -ENODEV; @@ -199,6 +278,12 @@ static int sysc_get_clocks(struct sysc *ddata) if (ddata->nr_clocks < 1) return 0; + if ((ddata->cfg.quirks & SYSC_QUIRK_EXT_OPT_CLOCK)) { + error = sysc_init_ext_opt_clock(ddata, NULL); + if (error) + return error; + } + if (ddata->nr_clocks > SYSC_MAX_CLOCKS) { dev_err(ddata->dev, "too many clocks for %pOF\n", np); @@ -231,39 +316,125 @@ static int sysc_get_clocks(struct sysc *ddata) return 0; } +static int sysc_enable_main_clocks(struct sysc *ddata) +{ + struct clk *clock; + int i, error; + + if (!ddata->clocks) + return 0; + + for (i = 0; i < SYSC_OPTFCK0; i++) { + clock = ddata->clocks[i]; + + /* Main clocks may not have ick */ + if (IS_ERR_OR_NULL(clock)) + continue; + + error = clk_enable(clock); + if (error) + goto err_disable; + } + + return 0; + +err_disable: + for (i--; i >= 0; i--) { + clock = ddata->clocks[i]; + + /* Main clocks may not have ick */ + if (IS_ERR_OR_NULL(clock)) + continue; + + clk_disable(clock); + } + + return error; +} + +static void sysc_disable_main_clocks(struct sysc *ddata) +{ + struct clk *clock; + int i; + + if (!ddata->clocks) + return; + + for (i = 0; i < SYSC_OPTFCK0; i++) { + clock = ddata->clocks[i]; + if (IS_ERR_OR_NULL(clock)) + continue; + + clk_disable(clock); + } +} + +static int sysc_enable_opt_clocks(struct sysc *ddata) +{ + struct clk *clock; + int i, error; + + if (!ddata->clocks) + return 0; + + for (i = SYSC_OPTFCK0; i < SYSC_MAX_CLOCKS; i++) { + clock = ddata->clocks[i]; + + /* Assume no holes for opt clocks */ + if (IS_ERR_OR_NULL(clock)) + return 0; + + error = clk_enable(clock); + if (error) + goto err_disable; + } + + return 0; + +err_disable: + for (i--; i >= 0; i--) { + clock = ddata->clocks[i]; + if (IS_ERR_OR_NULL(clock)) + continue; + + clk_disable(clock); + } + + return error; +} + +static void sysc_disable_opt_clocks(struct sysc *ddata) +{ + struct clk *clock; + int i; + + if (!ddata->clocks) + return; + + for (i = SYSC_OPTFCK0; i < SYSC_MAX_CLOCKS; i++) { + clock = ddata->clocks[i]; + + /* Assume no holes for opt clocks */ + if (IS_ERR_OR_NULL(clock)) + return; + + clk_disable(clock); + } +} + /** - * sysc_init_resets - reset module on init + * sysc_init_resets - init rstctrl reset line if configured * @ddata: device driver data * - * A module can have both OCP softreset control and external rstctrl. - * If more complicated rstctrl resets are needed, please handle these - * directly from the child device driver and map only the module reset - * for the parent interconnect target module device. - * - * Automatic reset of the module on init can be skipped with the - * "ti,no-reset-on-init" device tree property. + * See sysc_rstctrl_reset_deassert(). */ static int sysc_init_resets(struct sysc *ddata) { - int error; - ddata->rsts = devm_reset_control_array_get_optional_exclusive(ddata->dev); if (IS_ERR(ddata->rsts)) return PTR_ERR(ddata->rsts); - if (ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) - goto deassert; - - error = reset_control_assert(ddata->rsts); - if (error) - return error; - -deassert: - error = reset_control_deassert(ddata->rsts); - if (error) - return error; - return 0; } @@ -622,91 +793,239 @@ static void sysc_show_registers(struct sysc *ddata) buf); } -static int __maybe_unused sysc_runtime_suspend(struct device *dev) +#define SYSC_IDLE_MASK (SYSC_NR_IDLEMODES - 1) + +static int sysc_enable_module(struct device *dev) { - struct ti_sysc_platform_data *pdata; struct sysc *ddata; - int error = 0, i; + const struct sysc_regbits *regbits; + u32 reg, idlemodes, best_mode; ddata = dev_get_drvdata(dev); + if (ddata->offsets[SYSC_SYSCONFIG] == -ENODEV) + return 0; - if (!ddata->enabled) + /* + * TODO: Need to prevent clockdomain autoidle? + * See clkdm_deny_idle() in arch/mach-omap2/omap_hwmod.c + */ + + regbits = ddata->cap->regbits; + reg = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]); + + /* Set SIDLE mode */ + idlemodes = ddata->cfg.sidlemodes; + if (!idlemodes || regbits->sidle_shift < 0) + goto set_midle; + + best_mode = fls(ddata->cfg.sidlemodes) - 1; + if (best_mode > SYSC_IDLE_MASK) { + dev_err(dev, "%s: invalid sidlemode\n", __func__); + return -EINVAL; + } + + reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift); + reg |= best_mode << regbits->sidle_shift; + sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg); + +set_midle: + /* Set MIDLE mode */ + idlemodes = ddata->cfg.midlemodes; + if (!idlemodes || regbits->midle_shift < 0) return 0; - if (ddata->legacy_mode) { - pdata = dev_get_platdata(ddata->dev); - if (!pdata) - return 0; + best_mode = fls(ddata->cfg.midlemodes) - 1; + if (best_mode > SYSC_IDLE_MASK) { + dev_err(dev, "%s: invalid midlemode\n", __func__); + return -EINVAL; + } - if (!pdata->idle_module) - return -ENODEV; + reg &= ~(SYSC_IDLE_MASK << regbits->midle_shift); + reg |= best_mode << regbits->midle_shift; + sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg); - error = pdata->idle_module(dev, &ddata->cookie); - if (error) - dev_err(dev, "%s: could not idle: %i\n", - __func__, error); + return 0; +} + +static int sysc_best_idle_mode(u32 idlemodes, u32 *best_mode) +{ + if (idlemodes & BIT(SYSC_IDLE_SMART_WKUP)) + *best_mode = SYSC_IDLE_SMART_WKUP; + else if (idlemodes & BIT(SYSC_IDLE_SMART)) + *best_mode = SYSC_IDLE_SMART; + else if (idlemodes & SYSC_IDLE_FORCE) + *best_mode = SYSC_IDLE_FORCE; + else + return -EINVAL; + + return 0; +} + +static int sysc_disable_module(struct device *dev) +{ + struct sysc *ddata; + const struct sysc_regbits *regbits; + u32 reg, idlemodes, best_mode; + int ret; - goto idled; + ddata = dev_get_drvdata(dev); + if (ddata->offsets[SYSC_SYSCONFIG] == -ENODEV) + return 0; + + /* + * TODO: Need to prevent clockdomain autoidle? + * See clkdm_deny_idle() in arch/mach-omap2/omap_hwmod.c + */ + + regbits = ddata->cap->regbits; + reg = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]); + + /* Set MIDLE mode */ + idlemodes = ddata->cfg.midlemodes; + if (!idlemodes || regbits->midle_shift < 0) + goto set_sidle; + + ret = sysc_best_idle_mode(idlemodes, &best_mode); + if (ret) { + dev_err(dev, "%s: invalid midlemode\n", __func__); + return ret; } - for (i = 0; i < ddata->nr_clocks; i++) { - if (IS_ERR_OR_NULL(ddata->clocks[i])) - continue; + reg &= ~(SYSC_IDLE_MASK << regbits->midle_shift); + reg |= best_mode << regbits->midle_shift; + sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg); - if (i >= SYSC_OPTFCK0 && !sysc_opt_clks_needed(ddata)) - break; +set_sidle: + /* Set SIDLE mode */ + idlemodes = ddata->cfg.sidlemodes; + if (!idlemodes || regbits->sidle_shift < 0) + return 0; - clk_disable(ddata->clocks[i]); + ret = sysc_best_idle_mode(idlemodes, &best_mode); + if (ret) { + dev_err(dev, "%s: invalid sidlemode\n", __func__); + return ret; } -idled: - ddata->enabled = false; + reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift); + reg |= best_mode << regbits->sidle_shift; + sysc_write(ddata, ddata->offsets[SYSC_SYSCONFIG], reg); - return error; + return 0; } -static int __maybe_unused sysc_runtime_resume(struct device *dev) +static int __maybe_unused sysc_runtime_suspend_legacy(struct device *dev, + struct sysc *ddata) { struct ti_sysc_platform_data *pdata; + int error; + + pdata = dev_get_platdata(ddata->dev); + if (!pdata) + return 0; + + if (!pdata->idle_module) + return -ENODEV; + + error = pdata->idle_module(dev, &ddata->cookie); + if (error) + dev_err(dev, "%s: could not idle: %i\n", + __func__, error); + + return 0; +} + +static int __maybe_unused sysc_runtime_resume_legacy(struct device *dev, + struct sysc *ddata) +{ + struct ti_sysc_platform_data *pdata; + int error; + + pdata = dev_get_platdata(ddata->dev); + if (!pdata) + return 0; + + if (!pdata->enable_module) + return -ENODEV; + + error = pdata->enable_module(dev, &ddata->cookie); + if (error) + dev_err(dev, "%s: could not enable: %i\n", + __func__, error); + + return 0; +} + +static int __maybe_unused sysc_runtime_suspend(struct device *dev) +{ struct sysc *ddata; - int error = 0, i; + int error = 0; ddata = dev_get_drvdata(dev); - if (ddata->enabled) + if (!ddata->enabled) return 0; if (ddata->legacy_mode) { - pdata = dev_get_platdata(ddata->dev); - if (!pdata) - return 0; + error = sysc_runtime_suspend_legacy(dev, ddata); + if (error) + return error; + } else { + error = sysc_disable_module(dev); + if (error) + return error; + } - if (!pdata->enable_module) - return -ENODEV; + sysc_disable_main_clocks(ddata); - error = pdata->enable_module(dev, &ddata->cookie); - if (error) - dev_err(dev, "%s: could not enable: %i\n", - __func__, error); + if (sysc_opt_clks_needed(ddata)) + sysc_disable_opt_clocks(ddata); - goto awake; - } + ddata->enabled = false; - for (i = 0; i < ddata->nr_clocks; i++) { - if (IS_ERR_OR_NULL(ddata->clocks[i])) - continue; + return error; +} - if (i >= SYSC_OPTFCK0 && !sysc_opt_clks_needed(ddata)) - break; +static int __maybe_unused sysc_runtime_resume(struct device *dev) +{ + struct sysc *ddata; + int error = 0; + + ddata = dev_get_drvdata(dev); - error = clk_enable(ddata->clocks[i]); + if (ddata->enabled) + return 0; + + if (sysc_opt_clks_needed(ddata)) { + error = sysc_enable_opt_clocks(ddata); if (error) return error; } -awake: + error = sysc_enable_main_clocks(ddata); + if (error) + goto err_opt_clocks; + + if (ddata->legacy_mode) { + error = sysc_runtime_resume_legacy(dev, ddata); + if (error) + goto err_main_clocks; + } else { + error = sysc_enable_module(dev); + if (error) + goto err_main_clocks; + } + ddata->enabled = true; + return 0; + +err_main_clocks: + sysc_disable_main_clocks(ddata); +err_opt_clocks: + if (sysc_opt_clks_needed(ddata)) + sysc_disable_opt_clocks(ddata); + return error; } @@ -788,12 +1107,17 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffff00ff, 0), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff, - SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), /* Uarts on omap4 and later */ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff, - SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff, - SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), + + /* Quirks that need to be set based on the module address */ + SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -1, 0x50000800, 0xffffffff, + SYSC_QUIRK_EXT_OPT_CLOCK | SYSC_QUIRK_NO_RESET_ON_INIT | + SYSC_QUIRK_SWSUP_SIDLE), #ifdef DEBUG SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0), @@ -805,6 +1129,7 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { 0xffff00f0, 0), SYSC_QUIRK("dcan", 0, 0, -1, -1, 0xffffffff, 0xffffffff, 0), SYSC_QUIRK("dcan", 0, 0, -1, -1, 0x00001401, 0xffffffff, 0), + SYSC_QUIRK("dmic", 0, 0, 0x10, -1, 0x50010000, 0xffffffff, 0), SYSC_QUIRK("dwc3", 0, 0, 0x10, -1, 0x500a0200, 0xffffffff, 0), SYSC_QUIRK("epwmss", 0, 0, 0x4, -1, 0x47400001, 0xffffffff, 0), SYSC_QUIRK("gpu", 0, 0x1fc00, 0x1fc10, -1, 0, 0, 0), @@ -853,6 +1178,42 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { #endif }; +/* + * Early quirks based on module base and register offsets only that are + * needed before the module revision can be read + */ +static void sysc_init_early_quirks(struct sysc *ddata) +{ + const struct sysc_revision_quirk *q; + int i; + + for (i = 0; i < ARRAY_SIZE(sysc_revision_quirks); i++) { + q = &sysc_revision_quirks[i]; + + if (!q->base) + continue; + + if (q->base != ddata->module_pa) + continue; + + if (q->rev_offset >= 0 && + q->rev_offset != ddata->offsets[SYSC_REVISION]) + continue; + + if (q->sysc_offset >= 0 && + q->sysc_offset != ddata->offsets[SYSC_SYSCONFIG]) + continue; + + if (q->syss_offset >= 0 && + q->syss_offset != ddata->offsets[SYSC_SYSSTATUS]) + continue; + + ddata->name = q->name; + ddata->cfg.quirks |= q->quirks; + } +} + +/* Quirks that also consider the revision register value */ static void sysc_init_revision_quirks(struct sysc *ddata) { const struct sysc_revision_quirk *q; @@ -885,6 +1246,55 @@ static void sysc_init_revision_quirks(struct sysc *ddata) } } +/* + * Note that pdata->init_module() typically does a reset first. After + * pdata->init_module() is done, PM runtime can be used for the interconnect + * target module. + */ +static int sysc_legacy_init(struct sysc *ddata) +{ + struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev); + int error; + + if (!ddata->legacy_mode || !pdata || !pdata->init_module) + return 0; + + error = pdata->init_module(ddata->dev, ddata->mdata, &ddata->cookie); + if (error == -EEXIST) + error = 0; + + return error; +} + +/** + * sysc_rstctrl_reset_deassert - deassert rstctrl reset + * @ddata: device driver data + * @reset: reset before deassert + * + * A module can have both OCP softreset control and external rstctrl. + * If more complicated rstctrl resets are needed, please handle these + * directly from the child device driver and map only the module reset + * for the parent interconnect target module device. + * + * Automatic reset of the module on init can be skipped with the + * "ti,no-reset-on-init" device tree property. + */ +static int sysc_rstctrl_reset_deassert(struct sysc *ddata, bool reset) +{ + int error; + + if (!ddata->rsts) + return 0; + + if (reset) { + error = reset_control_assert(ddata->rsts); + if (error) + return error; + } + + return reset_control_deassert(ddata->rsts); +} + static int sysc_reset(struct sysc *ddata) { int offset = ddata->offsets[SYSC_SYSCONFIG]; @@ -915,38 +1325,58 @@ static int sysc_reset(struct sysc *ddata) 100, MAX_MODULE_SOFTRESET_WAIT); } -/* At this point the module is configured enough to read the revision */ +/* + * At this point the module is configured enough to read the revision but + * module may not be completely configured yet to use PM runtime. Enable + * all clocks directly during init to configure the quirks needed for PM + * runtime based on the revision register. + */ static int sysc_init_module(struct sysc *ddata) { - int error; + int error = 0; + bool manage_clocks = true; + bool reset = true; - if (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE_ON_INIT) { - ddata->revision = sysc_read_revision(ddata); - goto rev_quirks; - } + if (ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) + reset = false; - error = pm_runtime_get_sync(ddata->dev); - if (error < 0) { - pm_runtime_put_noidle(ddata->dev); + error = sysc_rstctrl_reset_deassert(ddata, reset); + if (error) + return error; - return 0; - } + if (ddata->cfg.quirks & + (SYSC_QUIRK_NO_IDLE | SYSC_QUIRK_NO_IDLE_ON_INIT)) + manage_clocks = false; - error = sysc_reset(ddata); - if (error) { - dev_err(ddata->dev, "Reset failed with %d\n", error); - pm_runtime_put_sync(ddata->dev); + if (manage_clocks) { + error = sysc_enable_opt_clocks(ddata); + if (error) + return error; - return error; + error = sysc_enable_main_clocks(ddata); + if (error) + goto err_opt_clocks; } ddata->revision = sysc_read_revision(ddata); - pm_runtime_put_sync(ddata->dev); - -rev_quirks: sysc_init_revision_quirks(ddata); - return 0; + error = sysc_legacy_init(ddata); + if (error) + goto err_main_clocks; + + error = sysc_reset(ddata); + if (error) + dev_err(ddata->dev, "Reset failed with %d\n", error); + +err_main_clocks: + if (manage_clocks) + sysc_disable_main_clocks(ddata); +err_opt_clocks: + if (manage_clocks) + sysc_disable_opt_clocks(ddata); + + return error; } static int sysc_init_sysc_mask(struct sysc *ddata) @@ -1208,7 +1638,7 @@ static int sysc_child_resume_noirq(struct device *dev) } #endif -struct dev_pm_domain sysc_child_pm_domain = { +static struct dev_pm_domain sysc_child_pm_domain = { .ops = { SET_RUNTIME_PM_OPS(sysc_child_runtime_suspend, sysc_child_runtime_resume, @@ -1281,6 +1711,8 @@ static const struct sysc_dts_quirk sysc_dts_quirks[] = { .mask = SYSC_QUIRK_NO_IDLE_ON_INIT, }, { .name = "ti,no-reset-on-init", .mask = SYSC_QUIRK_NO_RESET_ON_INIT, }, + { .name = "ti,no-idle", + .mask = SYSC_QUIRK_NO_IDLE, }, }; static void sysc_parse_dts_quirks(struct sysc *ddata, struct device_node *np, @@ -1331,6 +1763,9 @@ static void sysc_unprepare(struct sysc *ddata) { int i; + if (!ddata->clocks) + return; + for (i = 0; i < SYSC_MAX_CLOCKS; i++) { if (!IS_ERR_OR_NULL(ddata->clocks[i])) clk_unprepare(ddata->clocks[i]); @@ -1576,28 +2011,26 @@ static const struct sysc_capabilities sysc_dra7_mcan = { static int sysc_init_pdata(struct sysc *ddata) { struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev); - struct ti_sysc_module_data mdata; - int error = 0; + struct ti_sysc_module_data *mdata; if (!pdata || !ddata->legacy_mode) return 0; - mdata.name = ddata->legacy_mode; - mdata.module_pa = ddata->module_pa; - mdata.module_size = ddata->module_size; - mdata.offsets = ddata->offsets; - mdata.nr_offsets = SYSC_MAX_REGS; - mdata.cap = ddata->cap; - mdata.cfg = &ddata->cfg; + mdata = devm_kzalloc(ddata->dev, sizeof(*mdata), GFP_KERNEL); + if (!mdata) + return -ENOMEM; - if (!pdata->init_module) - return -ENODEV; + mdata->name = ddata->legacy_mode; + mdata->module_pa = ddata->module_pa; + mdata->module_size = ddata->module_size; + mdata->offsets = ddata->offsets; + mdata->nr_offsets = SYSC_MAX_REGS; + mdata->cap = ddata->cap; + mdata->cfg = &ddata->cfg; - error = pdata->init_module(ddata->dev, &mdata, &ddata->cookie); - if (error == -EEXIST) - error = 0; + ddata->mdata = mdata; - return error; + return 0; } static int sysc_init_match(struct sysc *ddata) @@ -1651,10 +2084,6 @@ static int sysc_probe(struct platform_device *pdev) if (error) goto unprepare; - error = sysc_get_clocks(ddata); - if (error) - return error; - error = sysc_map_and_check_registers(ddata); if (error) goto unprepare; @@ -1675,15 +2104,21 @@ static int sysc_probe(struct platform_device *pdev) if (error) goto unprepare; + sysc_init_early_quirks(ddata); + + error = sysc_get_clocks(ddata); + if (error) + return error; + error = sysc_init_resets(ddata); if (error) return error; - pm_runtime_enable(ddata->dev); error = sysc_init_module(ddata); if (error) goto unprepare; + pm_runtime_enable(ddata->dev); error = pm_runtime_get_sync(ddata->dev); if (error < 0) { pm_runtime_put_noidle(ddata->dev); diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c index 8febd2431545..a11f93ecbf34 100644 --- a/drivers/clk/zynqmp/clkc.c +++ b/drivers/clk/zynqmp/clkc.c @@ -739,8 +739,8 @@ static int zynqmp_clock_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; eemi_ops = zynqmp_pm_get_eemi_ops(); - if (!eemi_ops) - return -ENXIO; + if (IS_ERR(eemi_ops)) + return PTR_ERR(eemi_ops); ret = zynqmp_clk_setup(dev->of_node); diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 4b3d143f0f8a..48321488f0fd 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -69,6 +69,13 @@ config FTTMR010_TIMER Enables support for the Faraday Technology timer block FTTMR010. +config IXP4XX_TIMER + bool "Intel XScale IXP4xx timer driver" if COMPILE_TEST + depends on HAS_IOMEM + select CLKSRC_MMIO + help + Enables support for the Intel XScale IXP4xx SoC timer. + config ROCKCHIP_TIMER bool "Rockchip timer driver" if COMPILE_TEST depends on ARM || ARM64 diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index be6e0fbc7489..dba4eff880de 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_OMAP_DM_TIMER) += timer-ti-dm.o obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o +obj-$(CONFIG_IXP4XX_TIMER) += timer-ixp4xx.o obj-$(CONFIG_ROCKCHIP_TIMER) += timer-rockchip.o obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o diff --git a/drivers/clocksource/timer-ixp4xx.c b/drivers/clocksource/timer-ixp4xx.c new file mode 100644 index 000000000000..404445bc11ea --- /dev/null +++ b/drivers/clocksource/timer-ixp4xx.c @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IXP4 timer driver + * Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org> + * + * Based on arch/arm/mach-ixp4xx/common.c + * Copyright 2002 (C) Intel Corporation + * Copyright 2003-2004 (C) MontaVista, Software, Inc. + * Copyright (C) Deepak Saxena <dsaxena@plexity.net> + */ +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/sched_clock.h> +#include <linux/slab.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +/* Goes away with OF conversion */ +#include <linux/platform_data/timer-ixp4xx.h> + +/* + * Constants to make it easy to access Timer Control/Status registers + */ +#define IXP4XX_OSTS_OFFSET 0x00 /* Continuous Timestamp */ +#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */ +#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */ +#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */ +#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */ +#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */ +#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */ +#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */ +#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */ + +/* + * Timer register values and bit definitions + */ +#define IXP4XX_OST_ENABLE 0x00000001 +#define IXP4XX_OST_ONE_SHOT 0x00000002 +/* Low order bits of reload value ignored */ +#define IXP4XX_OST_RELOAD_MASK 0x00000003 +#define IXP4XX_OST_DISABLED 0x00000000 +#define IXP4XX_OSST_TIMER_1_PEND 0x00000001 +#define IXP4XX_OSST_TIMER_2_PEND 0x00000002 +#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004 +#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008 +#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010 + +#define IXP4XX_WDT_KEY 0x0000482E +#define IXP4XX_WDT_RESET_ENABLE 0x00000001 +#define IXP4XX_WDT_IRQ_ENABLE 0x00000002 +#define IXP4XX_WDT_COUNT_ENABLE 0x00000004 + +struct ixp4xx_timer { + void __iomem *base; + unsigned int tick_rate; + u32 latch; + struct clock_event_device clkevt; +#ifdef CONFIG_ARM + struct delay_timer delay_timer; +#endif +}; + +/* + * A local singleton used by sched_clock and delay timer reads, which are + * fast and stateless + */ +static struct ixp4xx_timer *local_ixp4xx_timer; + +static inline struct ixp4xx_timer * +to_ixp4xx_timer(struct clock_event_device *evt) +{ + return container_of(evt, struct ixp4xx_timer, clkevt); +} + +static u64 notrace ixp4xx_read_sched_clock(void) +{ + return __raw_readl(local_ixp4xx_timer->base + IXP4XX_OSTS_OFFSET); +} + +static u64 ixp4xx_clocksource_read(struct clocksource *c) +{ + return __raw_readl(local_ixp4xx_timer->base + IXP4XX_OSTS_OFFSET); +} + +static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id) +{ + struct ixp4xx_timer *tmr = dev_id; + struct clock_event_device *evt = &tmr->clkevt; + + /* Clear Pending Interrupt */ + __raw_writel(IXP4XX_OSST_TIMER_1_PEND, + tmr->base + IXP4XX_OSST_OFFSET); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static int ixp4xx_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct ixp4xx_timer *tmr = to_ixp4xx_timer(evt); + u32 val; + + val = __raw_readl(tmr->base + IXP4XX_OSRT1_OFFSET); + /* Keep enable/oneshot bits */ + val &= IXP4XX_OST_RELOAD_MASK; + __raw_writel((cycles & ~IXP4XX_OST_RELOAD_MASK) | val, + tmr->base + IXP4XX_OSRT1_OFFSET); + + return 0; +} + +static int ixp4xx_shutdown(struct clock_event_device *evt) +{ + struct ixp4xx_timer *tmr = to_ixp4xx_timer(evt); + u32 val; + + val = __raw_readl(tmr->base + IXP4XX_OSRT1_OFFSET); + val &= ~IXP4XX_OST_ENABLE; + __raw_writel(val, tmr->base + IXP4XX_OSRT1_OFFSET); + + return 0; +} + +static int ixp4xx_set_oneshot(struct clock_event_device *evt) +{ + struct ixp4xx_timer *tmr = to_ixp4xx_timer(evt); + + __raw_writel(IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT, + tmr->base + IXP4XX_OSRT1_OFFSET); + + return 0; +} + +static int ixp4xx_set_periodic(struct clock_event_device *evt) +{ + struct ixp4xx_timer *tmr = to_ixp4xx_timer(evt); + u32 val; + + val = tmr->latch & ~IXP4XX_OST_RELOAD_MASK; + val |= IXP4XX_OST_ENABLE; + __raw_writel(val, tmr->base + IXP4XX_OSRT1_OFFSET); + + return 0; +} + +static int ixp4xx_resume(struct clock_event_device *evt) +{ + struct ixp4xx_timer *tmr = to_ixp4xx_timer(evt); + u32 val; + + val = __raw_readl(tmr->base + IXP4XX_OSRT1_OFFSET); + val |= IXP4XX_OST_ENABLE; + __raw_writel(val, tmr->base + IXP4XX_OSRT1_OFFSET); + + return 0; +} + +/* + * IXP4xx timer tick + * We use OS timer1 on the CPU for the timer tick and the timestamp + * counter as a source of real clock ticks to account for missed jiffies. + */ +static __init int ixp4xx_timer_register(void __iomem *base, + int timer_irq, + unsigned int timer_freq) +{ + struct ixp4xx_timer *tmr; + int ret; + + tmr = kzalloc(sizeof(*tmr), GFP_KERNEL); + if (!tmr) + return -ENOMEM; + tmr->base = base; + tmr->tick_rate = timer_freq; + + /* + * The timer register doesn't allow to specify the two least + * significant bits of the timeout value and assumes them being zero. + * So make sure the latch is the best value with the two least + * significant bits unset. + */ + tmr->latch = DIV_ROUND_CLOSEST(timer_freq, + (IXP4XX_OST_RELOAD_MASK + 1) * HZ) + * (IXP4XX_OST_RELOAD_MASK + 1); + + local_ixp4xx_timer = tmr; + + /* Reset/disable counter */ + __raw_writel(0, tmr->base + IXP4XX_OSRT1_OFFSET); + + /* Clear any pending interrupt on timer 1 */ + __raw_writel(IXP4XX_OSST_TIMER_1_PEND, + tmr->base + IXP4XX_OSST_OFFSET); + + /* Reset time-stamp counter */ + __raw_writel(0, tmr->base + IXP4XX_OSTS_OFFSET); + + clocksource_mmio_init(NULL, "OSTS", timer_freq, 200, 32, + ixp4xx_clocksource_read); + + tmr->clkevt.name = "ixp4xx timer1"; + tmr->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + tmr->clkevt.rating = 200; + tmr->clkevt.set_state_shutdown = ixp4xx_shutdown; + tmr->clkevt.set_state_periodic = ixp4xx_set_periodic; + tmr->clkevt.set_state_oneshot = ixp4xx_set_oneshot; + tmr->clkevt.tick_resume = ixp4xx_resume; + tmr->clkevt.set_next_event = ixp4xx_set_next_event; + tmr->clkevt.cpumask = cpumask_of(0); + tmr->clkevt.irq = timer_irq; + ret = request_irq(timer_irq, ixp4xx_timer_interrupt, + IRQF_TIMER, "IXP4XX-TIMER1", tmr); + if (ret) { + pr_crit("no timer IRQ\n"); + return -ENODEV; + } + clockevents_config_and_register(&tmr->clkevt, timer_freq, + 0xf, 0xfffffffe); + +#ifdef CONFIG_ARM + sched_clock_register(ixp4xx_read_sched_clock, 32, timer_freq); +#endif + + return 0; +} + +/** + * ixp4xx_timer_setup() - Timer setup function to be called from boardfiles + * @timerbase: physical base of timer block + * @timer_irq: Linux IRQ number for the timer + * @timer_freq: Fixed frequency of the timer + */ +void __init ixp4xx_timer_setup(resource_size_t timerbase, + int timer_irq, + unsigned int timer_freq) +{ + void __iomem *base; + + base = ioremap(timerbase, 0x100); + if (!base) { + pr_crit("IXP4xx: can't remap timer\n"); + return; + } + ixp4xx_timer_register(base, timer_irq, timer_freq); +} +EXPORT_SYMBOL_GPL(ixp4xx_timer_setup); + +#ifdef CONFIG_OF +static __init int ixp4xx_of_timer_init(struct device_node *np) +{ + void __iomem *base; + int irq; + int ret; + + base = of_iomap(np, 0); + if (!base) { + pr_crit("IXP4xx: can't remap timer\n"); + return -ENODEV; + } + + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) { + pr_err("Can't parse IRQ\n"); + ret = -EINVAL; + goto out_unmap; + } + + /* TODO: get some fixed clocks into the device tree */ + ret = ixp4xx_timer_register(base, irq, 66666000); + if (ret) + goto out_unmap; + return 0; + +out_unmap: + iounmap(base); + return ret; +} +TIMER_OF_DECLARE(ixp4xx, "intel,ixp4xx-timer", ixp4xx_of_timer_init); +#endif diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index 9bbde2f26cac..f5414b6dfb55 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -30,8 +30,8 @@ #include <crypto/authenc.h> #include <crypto/scatterwalk.h> -#include <mach/npe.h> -#include <mach/qmgr.h> +#include <linux/soc/ixp4xx/npe.h> +#include <linux/soc/ixp4xx/qmgr.h> #define MAX_KEYLEN 32 diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 7b655f6156fb..11fda9eb2466 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -253,6 +253,22 @@ config TI_SCI_PROTOCOL This protocol library is used by client drivers to use the features provided by the system controller. +config TRUSTED_FOUNDATIONS + bool "Trusted Foundations secure monitor support" + depends on ARM + help + Some devices (including most early Tegra-based consumer devices on + the market) are booted with the Trusted Foundations secure monitor + active, requiring some core operations to be performed by the secure + monitor instead of the kernel. + + This option allows the kernel to invoke the secure monitor whenever + required on devices using Trusted Foundations. See the functions and + comments in linux/firmware/trusted_foundations.h or the device tree + bindings for "tlm,trusted-foundations" for details on how to use it. + + Choose N if you don't know what this is about. + config HAVE_ARM_SMCCC bool diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 9a3909a22682..3fa0b34eb72f 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SCM_64) += qcom_scm-64.o obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o +obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o obj-$(CONFIG_ARM_SCMI_PROTOCOL) += arm_scmi/ obj-y += psci/ diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index 8f952f2f1a29..b5bc4c7a8fab 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -654,9 +654,7 @@ static int scmi_xfer_info_init(struct scmi_info *sinfo) static int scmi_mailbox_check(struct device_node *np) { - struct of_phandle_args arg; - - return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells", 0, &arg); + return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells", 0, NULL); } static int scmi_mbox_free_channel(int id, void *p, void *data) @@ -798,7 +796,9 @@ static int scmi_probe(struct platform_device *pdev) return -EINVAL; } - desc = of_match_device(scmi_of_match, dev)->data; + desc = of_device_get_match_data(dev); + if (!desc) + return -EINVAL; info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); if (!info) diff --git a/drivers/firmware/imx/Makefile b/drivers/firmware/imx/Makefile index 1b2e15b3c9ca..802c4ad8e8f9 100644 --- a/drivers/firmware/imx/Makefile +++ b/drivers/firmware/imx/Makefile @@ -1,3 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o +obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o obj-$(CONFIG_IMX_SCU_PD) += scu-pd.o diff --git a/drivers/firmware/imx/imx-scu-irq.c b/drivers/firmware/imx/imx-scu-irq.c new file mode 100644 index 000000000000..043833ad3c1a --- /dev/null +++ b/drivers/firmware/imx/imx-scu-irq.c @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + * + * Implementation of the SCU IRQ functions using MU. + * + */ + +#include <dt-bindings/firmware/imx/rsrc.h> +#include <linux/firmware/imx/ipc.h> +#include <linux/mailbox_client.h> + +#define IMX_SC_IRQ_FUNC_ENABLE 1 +#define IMX_SC_IRQ_FUNC_STATUS 2 +#define IMX_SC_IRQ_NUM_GROUP 4 + +static u32 mu_resource_id; + +struct imx_sc_msg_irq_get_status { + struct imx_sc_rpc_msg hdr; + union { + struct { + u16 resource; + u8 group; + u8 reserved; + } __packed req; + struct { + u32 status; + } resp; + } data; +}; + +struct imx_sc_msg_irq_enable { + struct imx_sc_rpc_msg hdr; + u32 mask; + u16 resource; + u8 group; + u8 enable; +} __packed; + +static struct imx_sc_ipc *imx_sc_irq_ipc_handle; +static struct work_struct imx_sc_irq_work; +static ATOMIC_NOTIFIER_HEAD(imx_scu_irq_notifier_chain); + +int imx_scu_irq_register_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_register( + &imx_scu_irq_notifier_chain, nb); +} +EXPORT_SYMBOL(imx_scu_irq_register_notifier); + +int imx_scu_irq_unregister_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister( + &imx_scu_irq_notifier_chain, nb); +} +EXPORT_SYMBOL(imx_scu_irq_unregister_notifier); + +static int imx_scu_irq_notifier_call_chain(unsigned long status, u8 *group) +{ + return atomic_notifier_call_chain(&imx_scu_irq_notifier_chain, + status, (void *)group); +} + +static void imx_scu_irq_work_handler(struct work_struct *work) +{ + struct imx_sc_msg_irq_get_status msg; + struct imx_sc_rpc_msg *hdr = &msg.hdr; + u32 irq_status; + int ret; + u8 i; + + for (i = 0; i < IMX_SC_IRQ_NUM_GROUP; i++) { + hdr->ver = IMX_SC_RPC_VERSION; + hdr->svc = IMX_SC_RPC_SVC_IRQ; + hdr->func = IMX_SC_IRQ_FUNC_STATUS; + hdr->size = 2; + + msg.data.req.resource = mu_resource_id; + msg.data.req.group = i; + + ret = imx_scu_call_rpc(imx_sc_irq_ipc_handle, &msg, true); + if (ret) { + pr_err("get irq group %d status failed, ret %d\n", + i, ret); + return; + } + + irq_status = msg.data.resp.status; + if (!irq_status) + continue; + + imx_scu_irq_notifier_call_chain(irq_status, &i); + } +} + +int imx_scu_irq_group_enable(u8 group, u32 mask, u8 enable) +{ + struct imx_sc_msg_irq_enable msg; + struct imx_sc_rpc_msg *hdr = &msg.hdr; + int ret; + + hdr->ver = IMX_SC_RPC_VERSION; + hdr->svc = IMX_SC_RPC_SVC_IRQ; + hdr->func = IMX_SC_IRQ_FUNC_ENABLE; + hdr->size = 3; + + msg.resource = mu_resource_id; + msg.group = group; + msg.mask = mask; + msg.enable = enable; + + ret = imx_scu_call_rpc(imx_sc_irq_ipc_handle, &msg, true); + if (ret) + pr_err("enable irq failed, group %d, mask %d, ret %d\n", + group, mask, ret); + + return ret; +} +EXPORT_SYMBOL(imx_scu_irq_group_enable); + +static void imx_scu_irq_callback(struct mbox_client *c, void *msg) +{ + schedule_work(&imx_sc_irq_work); +} + +int imx_scu_enable_general_irq_channel(struct device *dev) +{ + struct of_phandle_args spec; + struct mbox_client *cl; + struct mbox_chan *ch; + int ret = 0, i = 0; + + ret = imx_scu_get_handle(&imx_sc_irq_ipc_handle); + if (ret) + return ret; + + cl = devm_kzalloc(dev, sizeof(*cl), GFP_KERNEL); + if (!cl) + return -ENOMEM; + + cl->dev = dev; + cl->rx_callback = imx_scu_irq_callback; + + /* SCU general IRQ uses general interrupt channel 3 */ + ch = mbox_request_channel_byname(cl, "gip3"); + if (IS_ERR(ch)) { + ret = PTR_ERR(ch); + dev_err(dev, "failed to request mbox chan gip3, ret %d\n", ret); + devm_kfree(dev, cl); + return ret; + } + + INIT_WORK(&imx_sc_irq_work, imx_scu_irq_work_handler); + + if (!of_parse_phandle_with_args(dev->of_node, "mboxes", + "#mbox-cells", 0, &spec)) + i = of_alias_get_id(spec.np, "mu"); + + /* use mu1 as general mu irq channel if failed */ + if (i < 0) + i = 1; + + mu_resource_id = IMX_SC_R_MU_0A + i; + + return ret; +} +EXPORT_SYMBOL(imx_scu_enable_general_irq_channel); diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c index 2bb1a19c413f..04a24a863d6e 100644 --- a/drivers/firmware/imx/imx-scu.c +++ b/drivers/firmware/imx/imx-scu.c @@ -10,6 +10,7 @@ #include <linux/err.h> #include <linux/firmware/imx/types.h> #include <linux/firmware/imx/ipc.h> +#include <linux/firmware/imx/sci.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/kernel.h> @@ -246,6 +247,11 @@ static int imx_scu_probe(struct platform_device *pdev) imx_sc_ipc_handle = sc_ipc; + ret = imx_scu_enable_general_irq_channel(dev); + if (ret) + dev_warn(dev, + "failed to enable general irq channel: %d\n", ret); + dev_info(dev, "NXP i.MX SCU Initialized\n"); return devm_of_platform_populate(dev); diff --git a/drivers/firmware/imx/scu-pd.c b/drivers/firmware/imx/scu-pd.c index 39a94c7177fc..480cec69e2c9 100644 --- a/drivers/firmware/imx/scu-pd.c +++ b/drivers/firmware/imx/scu-pd.c @@ -74,7 +74,10 @@ struct imx_sc_pd_range { char *name; u32 rsrc; u8 num; + + /* add domain index */ bool postfix; + u8 start_from; }; struct imx_sc_pd_soc { @@ -84,71 +87,75 @@ struct imx_sc_pd_soc { static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = { /* LSIO SS */ - { "lsio-pwm", IMX_SC_R_PWM_0, 8, 1 }, - { "lsio-gpio", IMX_SC_R_GPIO_0, 8, 1 }, - { "lsio-gpt", IMX_SC_R_GPT_0, 5, 1 }, - { "lsio-kpp", IMX_SC_R_KPP, 1, 0 }, - { "lsio-fspi", IMX_SC_R_FSPI_0, 2, 1 }, - { "lsio-mu", IMX_SC_R_MU_0A, 14, 1 }, + { "pwm", IMX_SC_R_PWM_0, 8, true, 0 }, + { "gpio", IMX_SC_R_GPIO_0, 8, true, 0 }, + { "gpt", IMX_SC_R_GPT_0, 5, true, 0 }, + { "kpp", IMX_SC_R_KPP, 1, false, 0 }, + { "fspi", IMX_SC_R_FSPI_0, 2, true, 0 }, + { "mu", IMX_SC_R_MU_0A, 14, true, 0 }, /* CONN SS */ - { "con-usb", IMX_SC_R_USB_0, 2, 1 }, - { "con-usb0phy", IMX_SC_R_USB_0_PHY, 1, 0 }, - { "con-usb2", IMX_SC_R_USB_2, 1, 0 }, - { "con-usb2phy", IMX_SC_R_USB_2_PHY, 1, 0 }, - { "con-sdhc", IMX_SC_R_SDHC_0, 3, 1 }, - { "con-enet", IMX_SC_R_ENET_0, 2, 1 }, - { "con-nand", IMX_SC_R_NAND, 1, 0 }, - { "con-mlb", IMX_SC_R_MLB_0, 1, 1 }, - - /* Audio DMA SS */ - { "adma-audio-pll0", IMX_SC_R_AUDIO_PLL_0, 1, 0 }, - { "adma-audio-pll1", IMX_SC_R_AUDIO_PLL_1, 1, 0 }, - { "adma-audio-clk-0", IMX_SC_R_AUDIO_CLK_0, 1, 0 }, - { "adma-dma0-ch", IMX_SC_R_DMA_0_CH0, 16, 1 }, - { "adma-dma1-ch", IMX_SC_R_DMA_1_CH0, 16, 1 }, - { "adma-dma2-ch", IMX_SC_R_DMA_2_CH0, 5, 1 }, - { "adma-asrc0", IMX_SC_R_ASRC_0, 1, 0 }, - { "adma-asrc1", IMX_SC_R_ASRC_1, 1, 0 }, - { "adma-esai0", IMX_SC_R_ESAI_0, 1, 0 }, - { "adma-spdif0", IMX_SC_R_SPDIF_0, 1, 0 }, - { "adma-sai", IMX_SC_R_SAI_0, 3, 1 }, - { "adma-amix", IMX_SC_R_AMIX, 1, 0 }, - { "adma-mqs0", IMX_SC_R_MQS_0, 1, 0 }, - { "adma-dsp", IMX_SC_R_DSP, 1, 0 }, - { "adma-dsp-ram", IMX_SC_R_DSP_RAM, 1, 0 }, - { "adma-can", IMX_SC_R_CAN_0, 3, 1 }, - { "adma-ftm", IMX_SC_R_FTM_0, 2, 1 }, - { "adma-lpi2c", IMX_SC_R_I2C_0, 4, 1 }, - { "adma-adc", IMX_SC_R_ADC_0, 1, 1 }, - { "adma-lcd", IMX_SC_R_LCD_0, 1, 1 }, - { "adma-lcd0-pwm", IMX_SC_R_LCD_0_PWM_0, 1, 1 }, - { "adma-lpuart", IMX_SC_R_UART_0, 4, 1 }, - { "adma-lpspi", IMX_SC_R_SPI_0, 4, 1 }, - - /* VPU SS */ - { "vpu", IMX_SC_R_VPU, 1, 0 }, - { "vpu-pid", IMX_SC_R_VPU_PID0, 8, 1 }, - { "vpu-dec0", IMX_SC_R_VPU_DEC_0, 1, 0 }, - { "vpu-enc0", IMX_SC_R_VPU_ENC_0, 1, 0 }, + { "usb", IMX_SC_R_USB_0, 2, true, 0 }, + { "usb0phy", IMX_SC_R_USB_0_PHY, 1, false, 0 }, + { "usb2", IMX_SC_R_USB_2, 1, false, 0 }, + { "usb2phy", IMX_SC_R_USB_2_PHY, 1, false, 0 }, + { "sdhc", IMX_SC_R_SDHC_0, 3, true, 0 }, + { "enet", IMX_SC_R_ENET_0, 2, true, 0 }, + { "nand", IMX_SC_R_NAND, 1, false, 0 }, + { "mlb", IMX_SC_R_MLB_0, 1, true, 0 }, + + /* AUDIO SS */ + { "audio-pll0", IMX_SC_R_AUDIO_PLL_0, 1, false, 0 }, + { "audio-pll1", IMX_SC_R_AUDIO_PLL_1, 1, false, 0 }, + { "audio-clk-0", IMX_SC_R_AUDIO_CLK_0, 1, false, 0 }, + { "dma0-ch", IMX_SC_R_DMA_0_CH0, 16, true, 0 }, + { "dma1-ch", IMX_SC_R_DMA_1_CH0, 16, true, 0 }, + { "dma2-ch", IMX_SC_R_DMA_2_CH0, 5, true, 0 }, + { "asrc0", IMX_SC_R_ASRC_0, 1, false, 0 }, + { "asrc1", IMX_SC_R_ASRC_1, 1, false, 0 }, + { "esai0", IMX_SC_R_ESAI_0, 1, false, 0 }, + { "spdif0", IMX_SC_R_SPDIF_0, 1, false, 0 }, + { "sai", IMX_SC_R_SAI_0, 3, true, 0 }, + { "amix", IMX_SC_R_AMIX, 1, false, 0 }, + { "mqs0", IMX_SC_R_MQS_0, 1, false, 0 }, + { "dsp", IMX_SC_R_DSP, 1, false, 0 }, + { "dsp-ram", IMX_SC_R_DSP_RAM, 1, false, 0 }, + + /* DMA SS */ + { "can", IMX_SC_R_CAN_0, 3, true, 0 }, + { "ftm", IMX_SC_R_FTM_0, 2, true, 0 }, + { "lpi2c", IMX_SC_R_I2C_0, 4, true, 0 }, + { "adc", IMX_SC_R_ADC_0, 1, true, 0 }, + { "lcd", IMX_SC_R_LCD_0, 1, true, 0 }, + { "lcd0-pwm", IMX_SC_R_LCD_0_PWM_0, 1, true, 0 }, + { "lpuart", IMX_SC_R_UART_0, 4, true, 0 }, + { "lpspi", IMX_SC_R_SPI_0, 4, true, 0 }, + + /* VPU SS */ + { "vpu", IMX_SC_R_VPU, 1, false, 0 }, + { "vpu-pid", IMX_SC_R_VPU_PID0, 8, true, 0 }, + { "vpu-dec0", IMX_SC_R_VPU_DEC_0, 1, false, 0 }, + { "vpu-enc0", IMX_SC_R_VPU_ENC_0, 1, false, 0 }, /* GPU SS */ - { "gpu0-pid", IMX_SC_R_GPU_0_PID0, 4, 1 }, + { "gpu0-pid", IMX_SC_R_GPU_0_PID0, 4, true, 0 }, /* HSIO SS */ - { "hsio-pcie-b", IMX_SC_R_PCIE_B, 1, 0 }, - { "hsio-serdes-1", IMX_SC_R_SERDES_1, 1, 0 }, - { "hsio-gpio", IMX_SC_R_HSIO_GPIO, 1, 0 }, + { "pcie-b", IMX_SC_R_PCIE_B, 1, false, 0 }, + { "serdes-1", IMX_SC_R_SERDES_1, 1, false, 0 }, + { "hsio-gpio", IMX_SC_R_HSIO_GPIO, 1, false, 0 }, + + /* MIPI SS */ + { "mipi0", IMX_SC_R_MIPI_0, 1, false, 0 }, + { "mipi0-pwm0", IMX_SC_R_MIPI_0_PWM_0, 1, false, 0 }, + { "mipi0-i2c", IMX_SC_R_MIPI_0_I2C_0, 2, true, 0 }, - /* MIPI/LVDS SS */ - { "mipi0", IMX_SC_R_MIPI_0, 1, 0 }, - { "mipi0-pwm0", IMX_SC_R_MIPI_0_PWM_0, 1, 0 }, - { "mipi0-i2c", IMX_SC_R_MIPI_0_I2C_0, 2, 1 }, - { "lvds0", IMX_SC_R_LVDS_0, 1, 0 }, + /* LVDS SS */ + { "lvds0", IMX_SC_R_LVDS_0, 1, false, 0 }, /* DC SS */ - { "dc0", IMX_SC_R_DC_0, 1, 0 }, - { "dc0-pll", IMX_SC_R_DC_0_PLL_0, 2, 1 }, + { "dc0", IMX_SC_R_DC_0, 1, false, 0 }, + { "dc0-pll", IMX_SC_R_DC_0_PLL_0, 2, true, 0 }, }; static const struct imx_sc_pd_soc imx8qxp_scu_pd = { @@ -236,7 +243,7 @@ imx_scu_add_pm_domain(struct device *dev, int idx, if (pd_ranges->postfix) snprintf(sc_pd->name, sizeof(sc_pd->name), - "%s%i", pd_ranges->name, idx); + "%s%i", pd_ranges->name, pd_ranges->start_from + idx); else snprintf(sc_pd->name, sizeof(sc_pd->name), "%s", pd_ranges->name); diff --git a/arch/arm/firmware/trusted_foundations.c b/drivers/firmware/trusted_foundations.c index 689e6565abfc..fd4999388ff1 100644 --- a/arch/arm/firmware/trusted_foundations.c +++ b/drivers/firmware/trusted_foundations.c @@ -17,8 +17,17 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/of.h> + +#include <linux/firmware/trusted_foundations.h> + #include <asm/firmware.h> -#include <asm/trusted_foundations.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/outercache.h> + +#define TF_CACHE_MAINT 0xfffff100 + +#define TF_CACHE_ENABLE 1 +#define TF_CACHE_DISABLE 2 #define TF_SET_CPU_BOOT_ADDR_SMC 0xfffff200 @@ -60,16 +69,75 @@ static int tf_set_cpu_boot_addr(int cpu, unsigned long boot_addr) return 0; } -static int tf_prepare_idle(void) +static int tf_prepare_idle(unsigned long mode) { - tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S1_NOFLUSH_L2, cpu_boot_addr); + switch (mode) { + case TF_PM_MODE_LP0: + tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S3, cpu_boot_addr); + break; + + case TF_PM_MODE_LP1: + tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S2, cpu_boot_addr); + break; + + case TF_PM_MODE_LP1_NO_MC_CLK: + tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S2_NO_MC_CLK, + cpu_boot_addr); + break; + + case TF_PM_MODE_LP2: + tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S1, cpu_boot_addr); + break; + + case TF_PM_MODE_LP2_NOFLUSH_L2: + tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S1_NOFLUSH_L2, + cpu_boot_addr); + break; + + default: + return -EINVAL; + } return 0; } +#ifdef CONFIG_CACHE_L2X0 +static void tf_cache_write_sec(unsigned long val, unsigned int reg) +{ + u32 l2x0_way_mask = 0xff; + + switch (reg) { + case L2X0_CTRL: + if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_ASSOCIATIVITY_16) + l2x0_way_mask = 0xffff; + + if (val == L2X0_CTRL_EN) + tf_generic_smc(TF_CACHE_MAINT, TF_CACHE_ENABLE, + l2x0_saved_regs.aux_ctrl); + else + tf_generic_smc(TF_CACHE_MAINT, TF_CACHE_DISABLE, + l2x0_way_mask); + break; + + default: + break; + } +} + +static int tf_init_cache(void) +{ + outer_cache.write_sec = tf_cache_write_sec; + + return 0; +} +#endif /* CONFIG_CACHE_L2X0 */ + static const struct firmware_ops trusted_foundations_ops = { .set_cpu_boot_addr = tf_set_cpu_boot_addr, .prepare_idle = tf_prepare_idle, +#ifdef CONFIG_CACHE_L2X0 + .l2x0_init = tf_init_cache, +#endif }; void register_trusted_foundations(struct trusted_foundations_platform_data *pd) @@ -101,3 +169,8 @@ void of_register_trusted_foundations(void) panic("Trusted Foundation: missing version-minor property\n"); register_trusted_foundations(&pdata); } + +bool trusted_foundations_registered(void) +{ + return firmware_ops == &trusted_foundations_ops; +} diff --git a/drivers/firmware/xilinx/zynqmp-debug.c b/drivers/firmware/xilinx/zynqmp-debug.c index 2771df6df379..c6d0724da4db 100644 --- a/drivers/firmware/xilinx/zynqmp-debug.c +++ b/drivers/firmware/xilinx/zynqmp-debug.c @@ -90,9 +90,6 @@ static int process_api_request(u32 pm_id, u64 *pm_api_arg, u32 *pm_api_ret) int ret; struct zynqmp_pm_query_data qdata = {0}; - if (!eemi_ops) - return -ENXIO; - switch (pm_id) { case PM_GET_API_VERSION: ret = eemi_ops->get_api_version(&pm_api_version); @@ -163,21 +160,14 @@ static ssize_t zynqmp_pm_debugfs_api_write(struct file *file, strcpy(debugfs_buf, ""); - if (*off != 0 || len == 0) + if (*off != 0 || len <= 1 || len > PAGE_SIZE - 1) return -EINVAL; - kern_buff = kzalloc(len, GFP_KERNEL); - if (!kern_buff) - return -ENOMEM; - + kern_buff = memdup_user_nul(ptr, len); + if (IS_ERR(kern_buff)) + return PTR_ERR(kern_buff); tmp_buff = kern_buff; - ret = strncpy_from_user(kern_buff, ptr, len); - if (ret < 0) { - ret = -EFAULT; - goto err; - } - /* Read the API name from a user request */ pm_api_req = strsep(&kern_buff, " "); diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index 98f936125643..fd3d83745208 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -24,6 +24,8 @@ #include <linux/firmware/xlnx-zynqmp.h> #include "zynqmp-debug.h" +static const struct zynqmp_eemi_ops *eemi_ops_tbl; + static const struct mfd_cell firmware_devs[] = { { .name = "zynqmp_power_controller", @@ -538,6 +540,49 @@ static int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset, } /** + * zynqmp_pm_fpga_load - Perform the fpga load + * @address: Address to write to + * @size: pl bitstream size + * @flags: Bitstream type + * -XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration + * -XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration + * + * This function provides access to pmufw. To transfer + * the required bitstream into PL. + * + * Return: Returns status, either success or error+reason + */ +static int zynqmp_pm_fpga_load(const u64 address, const u32 size, + const u32 flags) +{ + return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address), + upper_32_bits(address), size, flags, NULL); +} + +/** + * zynqmp_pm_fpga_get_status - Read value from PCAP status register + * @value: Value to read + * + * This function provides access to the pmufw to get the PCAP + * status + * + * Return: Returns status, either success or error+reason + */ +static int zynqmp_pm_fpga_get_status(u32 *value) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + if (!value) + return -EINVAL; + + ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload); + *value = ret_payload[1]; + + return ret; +} + +/** * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller * master has initialized its own power management * @@ -640,6 +685,8 @@ static const struct zynqmp_eemi_ops eemi_ops = { .request_node = zynqmp_pm_request_node, .release_node = zynqmp_pm_release_node, .set_requirement = zynqmp_pm_set_requirement, + .fpga_load = zynqmp_pm_fpga_load, + .fpga_get_status = zynqmp_pm_fpga_get_status, }; /** @@ -649,7 +696,11 @@ static const struct zynqmp_eemi_ops eemi_ops = { */ const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void) { - return &eemi_ops; + if (eemi_ops_tbl) + return eemi_ops_tbl; + else + return ERR_PTR(-EPROBE_DEFER); + } EXPORT_SYMBOL_GPL(zynqmp_pm_get_eemi_ops); @@ -694,6 +745,9 @@ static int zynqmp_firmware_probe(struct platform_device *pdev) pr_info("%s Trustzone version v%d.%d\n", __func__, pm_tz_version >> 16, pm_tz_version & 0xFFFF); + /* Assign eemi_ops_table */ + eemi_ops_tbl = &eemi_ops; + zynqmp_pm_api_debugfs_init(); ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs, diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index c20445b867ae..d892f3efcd76 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -204,4 +204,13 @@ config FPGA_DFL_PCI To compile this as a module, choose M here. +config FPGA_MGR_ZYNQMP_FPGA + tristate "Xilinx ZynqMP FPGA" + depends on ARCH_ZYNQMP || COMPILE_TEST + help + FPGA manager driver support for Xilinx ZynqMP FPGAs. + This driver uses the processor configuration port(PCAP) + to configure the programmable logic(PL) through PS + on ZynqMP SoC. + endif # FPGA diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index c0dd4c82fbdb..312b9371742f 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC) += stratix10-soc.o obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o +obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c new file mode 100644 index 000000000000..f7cbaadf49ab --- /dev/null +++ b/drivers/fpga/zynqmp-fpga.c @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Xilinx, Inc. + */ + +#include <linux/dma-mapping.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/string.h> +#include <linux/firmware/xlnx-zynqmp.h> + +/* Constant Definitions */ +#define IXR_FPGA_DONE_MASK BIT(3) + +/** + * struct zynqmp_fpga_priv - Private data structure + * @dev: Device data structure + * @flags: flags which is used to identify the bitfile type + */ +struct zynqmp_fpga_priv { + struct device *dev; + u32 flags; +}; + +static int zynqmp_fpga_ops_write_init(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t size) +{ + struct zynqmp_fpga_priv *priv; + + priv = mgr->priv; + priv->flags = info->flags; + + return 0; +} + +static int zynqmp_fpga_ops_write(struct fpga_manager *mgr, + const char *buf, size_t size) +{ + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + struct zynqmp_fpga_priv *priv; + dma_addr_t dma_addr; + u32 eemi_flags = 0; + char *kbuf; + int ret; + + if (!eemi_ops || !eemi_ops->fpga_load) + return -ENXIO; + + priv = mgr->priv; + + kbuf = dma_alloc_coherent(priv->dev, size, &dma_addr, GFP_KERNEL); + if (!kbuf) + return -ENOMEM; + + memcpy(kbuf, buf, size); + + wmb(); /* ensure all writes are done before initiate FW call */ + + if (priv->flags & FPGA_MGR_PARTIAL_RECONFIG) + eemi_flags |= XILINX_ZYNQMP_PM_FPGA_PARTIAL; + + ret = eemi_ops->fpga_load(dma_addr, size, eemi_flags); + + dma_free_coherent(priv->dev, size, kbuf, dma_addr); + + return ret; +} + +static int zynqmp_fpga_ops_write_complete(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + return 0; +} + +static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr) +{ + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + u32 status; + + if (!eemi_ops || !eemi_ops->fpga_get_status) + return FPGA_MGR_STATE_UNKNOWN; + + eemi_ops->fpga_get_status(&status); + if (status & IXR_FPGA_DONE_MASK) + return FPGA_MGR_STATE_OPERATING; + + return FPGA_MGR_STATE_UNKNOWN; +} + +static const struct fpga_manager_ops zynqmp_fpga_ops = { + .state = zynqmp_fpga_ops_state, + .write_init = zynqmp_fpga_ops_write_init, + .write = zynqmp_fpga_ops_write, + .write_complete = zynqmp_fpga_ops_write_complete, +}; + +static int zynqmp_fpga_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct zynqmp_fpga_priv *priv; + struct fpga_manager *mgr; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + + mgr = devm_fpga_mgr_create(dev, "Xilinx ZynqMP FPGA Manager", + &zynqmp_fpga_ops, priv); + if (!mgr) + return -ENOMEM; + + platform_set_drvdata(pdev, mgr); + + ret = fpga_mgr_register(mgr); + if (ret) { + dev_err(dev, "unable to register FPGA manager"); + return ret; + } + + return 0; +} + +static int zynqmp_fpga_remove(struct platform_device *pdev) +{ + struct fpga_manager *mgr = platform_get_drvdata(pdev); + + fpga_mgr_unregister(mgr); + + return 0; +} + +static const struct of_device_id zynqmp_fpga_of_match[] = { + { .compatible = "xlnx,zynqmp-pcap-fpga", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, zynqmp_fpga_of_match); + +static struct platform_driver zynqmp_fpga_driver = { + .probe = zynqmp_fpga_probe, + .remove = zynqmp_fpga_remove, + .driver = { + .name = "zynqmp_fpga_manager", + .of_match_table = of_match_ptr(zynqmp_fpga_of_match), + }, +}; + +module_platform_driver(zynqmp_fpga_driver); + +MODULE_AUTHOR("Nava kishore Manne <navam@xilinx.com>"); +MODULE_DESCRIPTION("Xilinx ZynqMp FPGA Manager"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 9370276fe7fe..3d8b29b165c4 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -286,6 +286,19 @@ config GPIO_IOP If unsure, say N. +config GPIO_IXP4XX + bool "Intel IXP4xx GPIO" + depends on ARM # For <asm/mach-types.h> + depends on ARCH_IXP4XX + select GPIO_GENERIC + select IRQ_DOMAIN + select IRQ_DOMAIN_HIERARCHY + help + Say yes here to support the GPIO functionality of a number of Intel + IXP4xx series of chips. + + If unsure, say N. + config GPIO_LOONGSON bool "Loongson-2/3 GPIO support" depends on CPU_LOONGSON2 || CPU_LOONGSON3 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index db8d854f9aea..c4c4d93f6a4e 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_GPIO_HLWD) += gpio-hlwd.o obj-$(CONFIG_HTC_EGPIO) += gpio-htc-egpio.o obj-$(CONFIG_GPIO_ICH) += gpio-ich.o obj-$(CONFIG_GPIO_IOP) += gpio-iop.o +obj-$(CONFIG_GPIO_IXP4XX) += gpio-ixp4xx.o obj-$(CONFIG_GPIO_IT87) += gpio-it87.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o diff --git a/drivers/gpio/gpio-ixp4xx.c b/drivers/gpio/gpio-ixp4xx.c new file mode 100644 index 000000000000..4b1cf7ea858d --- /dev/null +++ b/drivers/gpio/gpio-ixp4xx.c @@ -0,0 +1,474 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// IXP4 GPIO driver +// Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org> +// +// based on previous work and know-how from: +// Deepak Saxena <dsaxena@plexity.net> + +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/irqchip.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/bitops.h> +/* Include that go away with DT transition */ +#include <linux/irqchip/irq-ixp4xx.h> + +#include <asm/mach-types.h> + +#define IXP4XX_REG_GPOUT 0x00 +#define IXP4XX_REG_GPOE 0x04 +#define IXP4XX_REG_GPIN 0x08 +#define IXP4XX_REG_GPIS 0x0C +#define IXP4XX_REG_GPIT1 0x10 +#define IXP4XX_REG_GPIT2 0x14 +#define IXP4XX_REG_GPCLK 0x18 +#define IXP4XX_REG_GPDBSEL 0x1C + +/* + * The hardware uses 3 bits to indicate interrupt "style". + * we clear and set these three bits accordingly. The lower 24 + * bits in two registers (GPIT1 and GPIT2) are used to set up + * the style for 8 lines each for a total of 16 GPIO lines. + */ +#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0 +#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1 +#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2 +#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3 +#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4 +#define IXP4XX_GPIO_STYLE_MASK GENMASK(2, 0) +#define IXP4XX_GPIO_STYLE_SIZE 3 + +/** + * struct ixp4xx_gpio - IXP4 GPIO state container + * @dev: containing device for this instance + * @fwnode: the fwnode for this GPIO chip + * @gc: gpiochip for this instance + * @domain: irqdomain for this chip instance + * @base: remapped I/O-memory base + * @irq_edge: Each bit represents an IRQ: 1: edge-triggered, + * 0: level triggered + */ +struct ixp4xx_gpio { + struct device *dev; + struct fwnode_handle *fwnode; + struct gpio_chip gc; + struct irq_domain *domain; + void __iomem *base; + unsigned long long irq_edge; +}; + +/** + * struct ixp4xx_gpio_map - IXP4 GPIO to parent IRQ map + * @gpio_offset: offset of the IXP4 GPIO line + * @parent_hwirq: hwirq on the parent IRQ controller + */ +struct ixp4xx_gpio_map { + int gpio_offset; + int parent_hwirq; +}; + +/* GPIO lines 0..12 have corresponding IRQs, GPIOs 13..15 have no IRQs */ +const struct ixp4xx_gpio_map ixp4xx_gpiomap[] = { + { .gpio_offset = 0, .parent_hwirq = 6 }, + { .gpio_offset = 1, .parent_hwirq = 7 }, + { .gpio_offset = 2, .parent_hwirq = 19 }, + { .gpio_offset = 3, .parent_hwirq = 20 }, + { .gpio_offset = 4, .parent_hwirq = 21 }, + { .gpio_offset = 5, .parent_hwirq = 22 }, + { .gpio_offset = 6, .parent_hwirq = 23 }, + { .gpio_offset = 7, .parent_hwirq = 24 }, + { .gpio_offset = 8, .parent_hwirq = 25 }, + { .gpio_offset = 9, .parent_hwirq = 26 }, + { .gpio_offset = 10, .parent_hwirq = 27 }, + { .gpio_offset = 11, .parent_hwirq = 28 }, + { .gpio_offset = 12, .parent_hwirq = 29 }, +}; + +static void ixp4xx_gpio_irq_ack(struct irq_data *d) +{ + struct ixp4xx_gpio *g = irq_data_get_irq_chip_data(d); + + __raw_writel(BIT(d->hwirq), g->base + IXP4XX_REG_GPIS); +} + +static void ixp4xx_gpio_irq_unmask(struct irq_data *d) +{ + struct ixp4xx_gpio *g = irq_data_get_irq_chip_data(d); + + /* ACK when unmasking if not edge-triggered */ + if (!(g->irq_edge & BIT(d->hwirq))) + ixp4xx_gpio_irq_ack(d); + + irq_chip_unmask_parent(d); +} + +static int ixp4xx_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct ixp4xx_gpio *g = irq_data_get_irq_chip_data(d); + int line = d->hwirq; + unsigned long flags; + u32 int_style; + u32 int_reg; + u32 val; + + switch (type) { + case IRQ_TYPE_EDGE_BOTH: + irq_set_handler_locked(d, handle_edge_irq); + int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; + g->irq_edge |= BIT(d->hwirq); + break; + case IRQ_TYPE_EDGE_RISING: + irq_set_handler_locked(d, handle_edge_irq); + int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; + g->irq_edge |= BIT(d->hwirq); + break; + case IRQ_TYPE_EDGE_FALLING: + irq_set_handler_locked(d, handle_edge_irq); + int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; + g->irq_edge |= BIT(d->hwirq); + break; + case IRQ_TYPE_LEVEL_HIGH: + irq_set_handler_locked(d, handle_level_irq); + int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; + g->irq_edge &= ~BIT(d->hwirq); + break; + case IRQ_TYPE_LEVEL_LOW: + irq_set_handler_locked(d, handle_level_irq); + int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; + g->irq_edge &= ~BIT(d->hwirq); + break; + default: + return -EINVAL; + } + + if (line >= 8) { + /* pins 8-15 */ + line -= 8; + int_reg = IXP4XX_REG_GPIT2; + } else { + /* pins 0-7 */ + int_reg = IXP4XX_REG_GPIT1; + } + + spin_lock_irqsave(&g->gc.bgpio_lock, flags); + + /* Clear the style for the appropriate pin */ + val = __raw_readl(g->base + int_reg); + val &= ~(IXP4XX_GPIO_STYLE_MASK << (line * IXP4XX_GPIO_STYLE_SIZE)); + __raw_writel(val, g->base + int_reg); + + __raw_writel(BIT(line), g->base + IXP4XX_REG_GPIS); + + /* Set the new style */ + val = __raw_readl(g->base + int_reg); + val |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); + __raw_writel(val, g->base + int_reg); + + /* Force-configure this line as an input */ + val = __raw_readl(g->base + IXP4XX_REG_GPOE); + val |= BIT(d->hwirq); + __raw_writel(val, g->base + IXP4XX_REG_GPOE); + + spin_unlock_irqrestore(&g->gc.bgpio_lock, flags); + + /* This parent only accept level high (asserted) */ + return irq_chip_set_type_parent(d, IRQ_TYPE_LEVEL_HIGH); +} + +static struct irq_chip ixp4xx_gpio_irqchip = { + .name = "IXP4GPIO", + .irq_ack = ixp4xx_gpio_irq_ack, + .irq_mask = irq_chip_mask_parent, + .irq_unmask = ixp4xx_gpio_irq_unmask, + .irq_set_type = ixp4xx_gpio_irq_set_type, +}; + +static int ixp4xx_gpio_to_irq(struct gpio_chip *gc, unsigned int offset) +{ + struct ixp4xx_gpio *g = gpiochip_get_data(gc); + struct irq_fwspec fwspec; + + fwspec.fwnode = g->fwnode; + fwspec.param_count = 2; + fwspec.param[0] = offset; + fwspec.param[1] = IRQ_TYPE_NONE; + + return irq_create_fwspec_mapping(&fwspec); +} + +static int ixp4xx_gpio_irq_domain_translate(struct irq_domain *domain, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) +{ + + /* We support standard DT translation */ + if (is_of_node(fwspec->fwnode) && fwspec->param_count == 2) { + *hwirq = fwspec->param[0]; + *type = fwspec->param[1]; + return 0; + } + + /* This goes away when we transition to DT */ + if (is_fwnode_irqchip(fwspec->fwnode)) { + if (fwspec->param_count != 2) + return -EINVAL; + *hwirq = fwspec->param[0]; + *type = fwspec->param[1]; + WARN_ON(*type == IRQ_TYPE_NONE); + return 0; + } + return -EINVAL; +} + +static int ixp4xx_gpio_irq_domain_alloc(struct irq_domain *d, + unsigned int irq, unsigned int nr_irqs, + void *data) +{ + struct ixp4xx_gpio *g = d->host_data; + irq_hw_number_t hwirq; + unsigned int type = IRQ_TYPE_NONE; + struct irq_fwspec *fwspec = data; + int ret; + int i; + + ret = ixp4xx_gpio_irq_domain_translate(d, fwspec, &hwirq, &type); + if (ret) + return ret; + + dev_dbg(g->dev, "allocate IRQ %d..%d, hwirq %lu..%lu\n", + irq, irq + nr_irqs - 1, + hwirq, hwirq + nr_irqs - 1); + + for (i = 0; i < nr_irqs; i++) { + struct irq_fwspec parent_fwspec; + const struct ixp4xx_gpio_map *map; + int j; + + /* Not all lines support IRQs */ + for (j = 0; j < ARRAY_SIZE(ixp4xx_gpiomap); j++) { + map = &ixp4xx_gpiomap[j]; + if (map->gpio_offset == hwirq) + break; + } + if (j == ARRAY_SIZE(ixp4xx_gpiomap)) { + dev_err(g->dev, "can't look up hwirq %lu\n", hwirq); + return -EINVAL; + } + dev_dbg(g->dev, "found parent hwirq %u\n", map->parent_hwirq); + + /* + * We set handle_bad_irq because the .set_type() should + * always be invoked and set the right type of handler. + */ + irq_domain_set_info(d, + irq + i, + hwirq + i, + &ixp4xx_gpio_irqchip, + g, + handle_bad_irq, + NULL, NULL); + irq_set_probe(irq + i); + + /* + * Create a IRQ fwspec to send up to the parent irqdomain: + * specify the hwirq we address on the parent and tie it + * all together up the chain. + */ + parent_fwspec.fwnode = d->parent->fwnode; + parent_fwspec.param_count = 2; + parent_fwspec.param[0] = map->parent_hwirq; + /* This parent only handles asserted level IRQs */ + parent_fwspec.param[1] = IRQ_TYPE_LEVEL_HIGH; + dev_dbg(g->dev, "alloc_irqs_parent for %d parent hwirq %d\n", + irq + i, map->parent_hwirq); + ret = irq_domain_alloc_irqs_parent(d, irq + i, 1, + &parent_fwspec); + if (ret) + dev_err(g->dev, + "failed to allocate parent hwirq %d for hwirq %lu\n", + map->parent_hwirq, hwirq); + } + + return 0; +} + +static const struct irq_domain_ops ixp4xx_gpio_irqdomain_ops = { + .translate = ixp4xx_gpio_irq_domain_translate, + .alloc = ixp4xx_gpio_irq_domain_alloc, + .free = irq_domain_free_irqs_common, +}; + +static int ixp4xx_gpio_probe(struct platform_device *pdev) +{ + unsigned long flags; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct irq_domain *parent; + struct resource *res; + struct ixp4xx_gpio *g; + int ret; + int i; + + g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL); + if (!g) + return -ENOMEM; + g->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + g->base = devm_ioremap_resource(dev, res); + if (IS_ERR(g->base)) { + dev_err(dev, "ioremap error\n"); + return PTR_ERR(g->base); + } + + /* + * Make sure GPIO 14 and 15 are NOT used as clocks but GPIO on + * specific machines. + */ + if (machine_is_dsmg600() || machine_is_nas100d()) + __raw_writel(0x0, g->base + IXP4XX_REG_GPCLK); + + /* + * This is a very special big-endian ARM issue: when the IXP4xx is + * run in big endian mode, all registers in the machine are switched + * around to the CPU-native endianness. As you see mostly in the + * driver we use __raw_readl()/__raw_writel() to access the registers + * in the appropriate order. With the GPIO library we need to specify + * byte order explicitly, so this flag needs to be set when compiling + * for big endian. + */ +#if defined(CONFIG_CPU_BIG_ENDIAN) + flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER; +#else + flags = 0; +#endif + + /* Populate and register gpio chip */ + ret = bgpio_init(&g->gc, dev, 4, + g->base + IXP4XX_REG_GPIN, + g->base + IXP4XX_REG_GPOUT, + NULL, + NULL, + g->base + IXP4XX_REG_GPOE, + flags); + if (ret) { + dev_err(dev, "unable to init generic GPIO\n"); + return ret; + } + g->gc.to_irq = ixp4xx_gpio_to_irq; + g->gc.ngpio = 16; + g->gc.label = "IXP4XX_GPIO_CHIP"; + /* + * TODO: when we have migrated to device tree and all GPIOs + * are fetched using phandles, set this to -1 to get rid of + * the fixed gpiochip base. + */ + g->gc.base = 0; + g->gc.parent = &pdev->dev; + g->gc.owner = THIS_MODULE; + + ret = devm_gpiochip_add_data(dev, &g->gc, g); + if (ret) { + dev_err(dev, "failed to add SoC gpiochip\n"); + return ret; + } + + /* + * When we convert to device tree we will simply look up the + * parent irqdomain using irq_find_host(parent) as parent comes + * from IRQCHIP_DECLARE(), then use of_node_to_fwnode() to get + * the fwnode. For now we need this boardfile style code. + */ + if (np) { + struct device_node *irq_parent; + + irq_parent = of_irq_find_parent(np); + if (!irq_parent) { + dev_err(dev, "no IRQ parent node\n"); + return -ENODEV; + } + parent = irq_find_host(irq_parent); + if (!parent) { + dev_err(dev, "no IRQ parent domain\n"); + return -ENODEV; + } + g->fwnode = of_node_to_fwnode(np); + } else { + parent = ixp4xx_get_irq_domain(); + g->fwnode = irq_domain_alloc_fwnode(g->base); + if (!g->fwnode) { + dev_err(dev, "no domain base\n"); + return -ENODEV; + } + } + g->domain = irq_domain_create_hierarchy(parent, + IRQ_DOMAIN_FLAG_HIERARCHY, + ARRAY_SIZE(ixp4xx_gpiomap), + g->fwnode, + &ixp4xx_gpio_irqdomain_ops, + g); + if (!g->domain) { + irq_domain_free_fwnode(g->fwnode); + dev_err(dev, "no hierarchical irq domain\n"); + return ret; + } + + /* + * After adding OF support, this is no longer needed: irqs + * will be allocated for the respective fwnodes. + */ + if (!np) { + for (i = 0; i < ARRAY_SIZE(ixp4xx_gpiomap); i++) { + const struct ixp4xx_gpio_map *map = &ixp4xx_gpiomap[i]; + struct irq_fwspec fwspec; + + fwspec.fwnode = g->fwnode; + /* This is the hwirq for the GPIO line side of things */ + fwspec.param[0] = map->gpio_offset; + fwspec.param[1] = IRQ_TYPE_EDGE_RISING; + fwspec.param_count = 2; + ret = __irq_domain_alloc_irqs(g->domain, + -1, /* just pick something */ + 1, + NUMA_NO_NODE, + &fwspec, + false, + NULL); + if (ret < 0) { + irq_domain_free_fwnode(g->fwnode); + dev_err(dev, + "can not allocate irq for GPIO line %d parent hwirq %d in hierarchy domain: %d\n", + map->gpio_offset, map->parent_hwirq, + ret); + return ret; + } + } + } + + platform_set_drvdata(pdev, g); + dev_info(dev, "IXP4 GPIO @%p registered\n", g->base); + + return 0; +} + +static const struct of_device_id ixp4xx_gpio_of_match[] = { + { + .compatible = "intel,ixp4xx-gpio", + }, + {}, +}; + + +static struct platform_driver ixp4xx_gpio_driver = { + .driver = { + .name = "ixp4xx-gpio", + .of_match_table = of_match_ptr(ixp4xx_gpio_of_match), + }, + .probe = ixp4xx_gpio_probe, +}; +builtin_platform_driver(ixp4xx_gpio_driver); diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 1fe039d7326b..82398827b64f 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -205,7 +205,7 @@ config KEYBOARD_LKKBD config KEYBOARD_EP93XX tristate "EP93xx Matrix Keypad support" - depends on ARCH_EP93XX + depends on ARCH_EP93XX || COMPILE_TEST select INPUT_MATRIXKMAP help Say Y here to enable the matrix keypad on the Cirrus EP93XX. diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c index f77b295e0123..575dac52f7b4 100644 --- a/drivers/input/keyboard/ep93xx_keypad.c +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -27,8 +27,7 @@ #include <linux/io.h> #include <linux/input/matrix_keypad.h> #include <linux/slab.h> - -#include <mach/hardware.h> +#include <linux/soc/cirrus/ep93xx.h> #include <linux/platform_data/keypad-ep93xx.h> /* @@ -137,10 +136,7 @@ static void ep93xx_keypad_config(struct ep93xx_keypad *keypad) struct ep93xx_keypad_platform_data *pdata = keypad->pdata; unsigned int val = 0; - if (pdata->flags & EP93XX_KEYPAD_KDIV) - clk_set_rate(keypad->clk, EP93XX_KEYTCHCLK_DIV4); - else - clk_set_rate(keypad->clk, EP93XX_KEYTCHCLK_DIV16); + clk_set_rate(keypad->clk, pdata->clk_rate); if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY) val |= KEY_INIT_DIS3KY; diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c index 1fe149f3def2..4776273fa10b 100644 --- a/drivers/input/misc/ixp4xx-beeper.c +++ b/drivers/input/misc/ixp4xx-beeper.c @@ -30,6 +30,8 @@ MODULE_ALIAS("platform:ixp4xx-beeper"); static DEFINE_SPINLOCK(beep_lock); +static int ixp4xx_timer2_irq; + static void ixp4xx_spkr_control(unsigned int pin, unsigned int count) { unsigned long flags; @@ -90,6 +92,7 @@ static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id) static int ixp4xx_spkr_probe(struct platform_device *dev) { struct input_dev *input_dev; + int irq; int err; input_dev = input_allocate_device(); @@ -110,15 +113,22 @@ static int ixp4xx_spkr_probe(struct platform_device *dev) input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE); input_dev->event = ixp4xx_spkr_event; + irq = platform_get_irq(dev, 0); + if (irq < 0) { + err = irq; + goto err_free_device; + } + err = gpio_request(dev->id, "ixp4-beeper"); if (err) goto err_free_device; - err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt, + err = request_irq(irq, &ixp4xx_spkr_interrupt, IRQF_NO_SUSPEND, "ixp4xx-beeper", (void *) dev->id); if (err) goto err_free_gpio; + ixp4xx_timer2_irq = irq; err = input_register_device(input_dev); if (err) @@ -129,7 +139,7 @@ static int ixp4xx_spkr_probe(struct platform_device *dev) return 0; err_free_irq: - free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id); + free_irq(irq, (void *)dev->id); err_free_gpio: gpio_free(dev->id); err_free_device: @@ -146,10 +156,10 @@ static int ixp4xx_spkr_remove(struct platform_device *dev) input_unregister_device(input_dev); /* turn the speaker off */ - disable_irq(IRQ_IXP4XX_TIMER2); + disable_irq(ixp4xx_timer2_irq); ixp4xx_spkr_control(pin, 0); - free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id); + free_irq(ixp4xx_timer2_irq, (void *)dev->id); gpio_free(dev->id); return 0; @@ -161,7 +171,7 @@ static void ixp4xx_spkr_shutdown(struct platform_device *dev) unsigned int pin = (unsigned int) input_get_drvdata(input_dev); /* turn off the speaker */ - disable_irq(IRQ_IXP4XX_TIMER2); + disable_irq(ixp4xx_timer2_irq); ixp4xx_spkr_control(pin, 0); } diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 5438abb1baba..cf7984991062 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -160,6 +160,12 @@ config IMGPDC_IRQ select GENERIC_IRQ_CHIP select IRQ_DOMAIN +config IXP4XX_IRQ + bool + select IRQ_DOMAIN + select GENERIC_IRQ_MULTI_HANDLER + select SPARSE_IRQ + config MADERA_IRQ tristate diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 85972ae1bd7f..f8c66e958a64 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_ATMEL_AIC5_IRQ) += irq-atmel-aic-common.o irq-atmel-aic5.o obj-$(CONFIG_I8259) += irq-i8259.o obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc.o obj-$(CONFIG_IRQ_MIPS_CPU) += irq-mips-cpu.o +obj-$(CONFIG_IXP4XX_IRQ) += irq-ixp4xx.o obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o obj-$(CONFIG_JCORE_AIC) += irq-jcore-aic.o obj-$(CONFIG_RDA_INTC) += irq-rda-intc.o diff --git a/drivers/irqchip/irq-ixp4xx.c b/drivers/irqchip/irq-ixp4xx.c new file mode 100644 index 000000000000..d576809429ac --- /dev/null +++ b/drivers/irqchip/irq-ixp4xx.c @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * irqchip for the IXP4xx interrupt controller + * Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org> + * + * Based on arch/arm/mach-ixp4xx/common.c + * Copyright 2002 (C) Intel Corporation + * Copyright 2003-2004 (C) MontaVista, Software, Inc. + * Copyright (C) Deepak Saxena <dsaxena@plexity.net> + */ +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/irqchip.h> +#include <linux/irqchip/irq-ixp4xx.h> +#include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/cpu.h> + +#include <asm/exception.h> +#include <asm/mach/irq.h> + +#define IXP4XX_ICPR 0x00 /* Interrupt Status */ +#define IXP4XX_ICMR 0x04 /* Interrupt Enable */ +#define IXP4XX_ICLR 0x08 /* Interrupt IRQ/FIQ Select */ +#define IXP4XX_ICIP 0x0C /* IRQ Status */ +#define IXP4XX_ICFP 0x10 /* FIQ Status */ +#define IXP4XX_ICHR 0x14 /* Interrupt Priority */ +#define IXP4XX_ICIH 0x18 /* IRQ Highest Pri Int */ +#define IXP4XX_ICFH 0x1C /* FIQ Highest Pri Int */ + +/* IXP43x and IXP46x-only */ +#define IXP4XX_ICPR2 0x20 /* Interrupt Status 2 */ +#define IXP4XX_ICMR2 0x24 /* Interrupt Enable 2 */ +#define IXP4XX_ICLR2 0x28 /* Interrupt IRQ/FIQ Select 2 */ +#define IXP4XX_ICIP2 0x2C /* IRQ Status */ +#define IXP4XX_ICFP2 0x30 /* FIQ Status */ +#define IXP4XX_ICEEN 0x34 /* Error High Pri Enable */ + +/** + * struct ixp4xx_irq - state container for the Faraday IRQ controller + * @irqbase: IRQ controller memory base in virtual memory + * @is_356: if this is an IXP43x, IXP45x or IX46x SoC (with 64 IRQs) + * @irqchip: irqchip for this instance + * @domain: IRQ domain for this instance + */ +struct ixp4xx_irq { + void __iomem *irqbase; + bool is_356; + struct irq_chip irqchip; + struct irq_domain *domain; +}; + +/* Local static state container */ +static struct ixp4xx_irq ixirq; + +/* GPIO Clocks */ +#define IXP4XX_GPIO_CLK_0 14 +#define IXP4XX_GPIO_CLK_1 15 + +static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type) +{ + /* All are level active high (asserted) here */ + if (type != IRQ_TYPE_LEVEL_HIGH) + return -EINVAL; + return 0; +} + +static void ixp4xx_irq_mask(struct irq_data *d) +{ + struct ixp4xx_irq *ixi = irq_data_get_irq_chip_data(d); + u32 val; + + if (ixi->is_356 && d->hwirq >= 32) { + val = __raw_readl(ixi->irqbase + IXP4XX_ICMR2); + val &= ~BIT(d->hwirq - 32); + __raw_writel(val, ixi->irqbase + IXP4XX_ICMR2); + } else { + val = __raw_readl(ixi->irqbase + IXP4XX_ICMR); + val &= ~BIT(d->hwirq); + __raw_writel(val, ixi->irqbase + IXP4XX_ICMR); + } +} + +/* + * Level triggered interrupts on GPIO lines can only be cleared when the + * interrupt condition disappears. + */ +static void ixp4xx_irq_unmask(struct irq_data *d) +{ + struct ixp4xx_irq *ixi = irq_data_get_irq_chip_data(d); + u32 val; + + if (ixi->is_356 && d->hwirq >= 32) { + val = __raw_readl(ixi->irqbase + IXP4XX_ICMR2); + val |= BIT(d->hwirq - 32); + __raw_writel(val, ixi->irqbase + IXP4XX_ICMR2); + } else { + val = __raw_readl(ixi->irqbase + IXP4XX_ICMR); + val |= BIT(d->hwirq); + __raw_writel(val, ixi->irqbase + IXP4XX_ICMR); + } +} + +asmlinkage void __exception_irq_entry ixp4xx_handle_irq(struct pt_regs *regs) +{ + struct ixp4xx_irq *ixi = &ixirq; + unsigned long status; + int i; + + status = __raw_readl(ixi->irqbase + IXP4XX_ICIP); + for_each_set_bit(i, &status, 32) + handle_domain_irq(ixi->domain, i, regs); + + /* + * IXP465/IXP435 has an upper IRQ status register + */ + if (ixi->is_356) { + status = __raw_readl(ixi->irqbase + IXP4XX_ICIP2); + for_each_set_bit(i, &status, 32) + handle_domain_irq(ixi->domain, i + 32, regs); + } +} + +static int ixp4xx_irq_domain_translate(struct irq_domain *domain, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) +{ + /* We support standard DT translation */ + if (is_of_node(fwspec->fwnode) && fwspec->param_count == 2) { + *hwirq = fwspec->param[0]; + *type = fwspec->param[1]; + return 0; + } + + if (is_fwnode_irqchip(fwspec->fwnode)) { + if (fwspec->param_count != 2) + return -EINVAL; + *hwirq = fwspec->param[0]; + *type = fwspec->param[1]; + WARN_ON(*type == IRQ_TYPE_NONE); + return 0; + } + + return -EINVAL; +} + +static int ixp4xx_irq_domain_alloc(struct irq_domain *d, + unsigned int irq, unsigned int nr_irqs, + void *data) +{ + struct ixp4xx_irq *ixi = d->host_data; + irq_hw_number_t hwirq; + unsigned int type = IRQ_TYPE_NONE; + struct irq_fwspec *fwspec = data; + int ret; + int i; + + ret = ixp4xx_irq_domain_translate(d, fwspec, &hwirq, &type); + if (ret) + return ret; + + for (i = 0; i < nr_irqs; i++) { + /* + * TODO: after converting IXP4xx to only device tree, set + * handle_bad_irq as default handler and assume all consumers + * call .set_type() as this is provided in the second cell in + * the device tree phandle. + */ + irq_domain_set_info(d, + irq + i, + hwirq + i, + &ixi->irqchip, + ixi, + handle_level_irq, + NULL, NULL); + irq_set_probe(irq + i); + } + + return 0; +} + +/* + * This needs to be a hierarchical irqdomain to work well with the + * GPIO irqchip (which is lower in the hierarchy) + */ +static const struct irq_domain_ops ixp4xx_irqdomain_ops = { + .translate = ixp4xx_irq_domain_translate, + .alloc = ixp4xx_irq_domain_alloc, + .free = irq_domain_free_irqs_common, +}; + +/** + * ixp4xx_get_irq_domain() - retrieve the ixp4xx irq domain + * + * This function will go away when we transition to DT probing. + */ +struct irq_domain *ixp4xx_get_irq_domain(void) +{ + struct ixp4xx_irq *ixi = &ixirq; + + return ixi->domain; +} +EXPORT_SYMBOL_GPL(ixp4xx_get_irq_domain); + +/* + * This is the Linux IRQ to hwirq mapping table. This goes away when + * we have DT support as all IRQ resources are defined in the device + * tree. It will register all the IRQs that are not used by the hierarchical + * GPIO IRQ chip. The "holes" inbetween these IRQs will be requested by + * the GPIO driver using . This is a step-gap solution. + */ +struct ixp4xx_irq_chunk { + int irq; + int hwirq; + int nr_irqs; +}; + +static const struct ixp4xx_irq_chunk ixp4xx_irq_chunks[] = { + { + .irq = 16, + .hwirq = 0, + .nr_irqs = 6, + }, + { + .irq = 24, + .hwirq = 8, + .nr_irqs = 11, + }, + { + .irq = 46, + .hwirq = 30, + .nr_irqs = 2, + }, + /* Only on the 436 variants */ + { + .irq = 48, + .hwirq = 32, + .nr_irqs = 10, + }, +}; + +/** + * ixp4x_irq_setup() - Common setup code for the IXP4xx interrupt controller + * @ixi: State container + * @irqbase: Virtual memory base for the interrupt controller + * @fwnode: Corresponding fwnode abstraction for this controller + * @is_356: if this is an IXP43x, IXP45x or IXP46x SoC variant + */ +static int ixp4xx_irq_setup(struct ixp4xx_irq *ixi, + void __iomem *irqbase, + struct fwnode_handle *fwnode, + bool is_356) +{ + int nr_irqs; + + ixi->irqbase = irqbase; + ixi->is_356 = is_356; + + /* Route all sources to IRQ instead of FIQ */ + __raw_writel(0x0, ixi->irqbase + IXP4XX_ICLR); + + /* Disable all interrupts */ + __raw_writel(0x0, ixi->irqbase + IXP4XX_ICMR); + + if (is_356) { + /* Route upper 32 sources to IRQ instead of FIQ */ + __raw_writel(0x0, ixi->irqbase + IXP4XX_ICLR2); + + /* Disable upper 32 interrupts */ + __raw_writel(0x0, ixi->irqbase + IXP4XX_ICMR2); + + nr_irqs = 64; + } else { + nr_irqs = 32; + } + + ixi->irqchip.name = "IXP4xx"; + ixi->irqchip.irq_mask = ixp4xx_irq_mask; + ixi->irqchip.irq_unmask = ixp4xx_irq_unmask; + ixi->irqchip.irq_set_type = ixp4xx_set_irq_type; + + ixi->domain = irq_domain_create_linear(fwnode, nr_irqs, + &ixp4xx_irqdomain_ops, + ixi); + if (!ixi->domain) { + pr_crit("IXP4XX: can not add primary irqdomain\n"); + return -ENODEV; + } + + set_handle_irq(ixp4xx_handle_irq); + + return 0; +} + +/** + * ixp4xx_irq_init() - Function to initialize the irqchip from boardfiles + * @irqbase: physical base for the irq controller + * @is_356: if this is an IXP43x, IXP45x or IXP46x SoC variant + */ +void __init ixp4xx_irq_init(resource_size_t irqbase, + bool is_356) +{ + struct ixp4xx_irq *ixi = &ixirq; + void __iomem *base; + struct fwnode_handle *fwnode; + struct irq_fwspec fwspec; + int nr_chunks; + int ret; + int i; + + base = ioremap(irqbase, 0x100); + if (!base) { + pr_crit("IXP4XX: could not ioremap interrupt controller\n"); + return; + } + fwnode = irq_domain_alloc_fwnode(base); + if (!fwnode) { + pr_crit("IXP4XX: no domain handle\n"); + return; + } + ret = ixp4xx_irq_setup(ixi, base, fwnode, is_356); + if (ret) { + pr_crit("IXP4XX: failed to set up irqchip\n"); + irq_domain_free_fwnode(fwnode); + } + + nr_chunks = ARRAY_SIZE(ixp4xx_irq_chunks); + if (!is_356) + nr_chunks--; + + /* + * After adding OF support, this is no longer needed: irqs + * will be allocated for the respective fwnodes. + */ + for (i = 0; i < nr_chunks; i++) { + const struct ixp4xx_irq_chunk *chunk = &ixp4xx_irq_chunks[i]; + + pr_info("Allocate Linux IRQs %d..%d HW IRQs %d..%d\n", + chunk->irq, chunk->irq + chunk->nr_irqs - 1, + chunk->hwirq, chunk->hwirq + chunk->nr_irqs - 1); + fwspec.fwnode = fwnode; + fwspec.param[0] = chunk->hwirq; + fwspec.param[1] = IRQ_TYPE_LEVEL_HIGH; + fwspec.param_count = 2; + ret = __irq_domain_alloc_irqs(ixi->domain, + chunk->irq, + chunk->nr_irqs, + NUMA_NO_NODE, + &fwspec, + false, + NULL); + if (ret < 0) { + pr_crit("IXP4XX: can not allocate irqs in hierarchy %d\n", + ret); + return; + } + } +} +EXPORT_SYMBOL_GPL(ixp4xx_irq_init); + +#ifdef CONFIG_OF +int __init ixp4xx_of_init_irq(struct device_node *np, + struct device_node *parent) +{ + struct ixp4xx_irq *ixi = &ixirq; + void __iomem *base; + struct fwnode_handle *fwnode; + bool is_356; + int ret; + + base = of_iomap(np, 0); + if (!base) { + pr_crit("IXP4XX: could not ioremap interrupt controller\n"); + return -ENODEV; + } + fwnode = of_node_to_fwnode(np); + + /* These chip variants have 64 interrupts */ + is_356 = of_device_is_compatible(np, "intel,ixp43x-interrupt") || + of_device_is_compatible(np, "intel,ixp45x-interrupt") || + of_device_is_compatible(np, "intel,ixp46x-interrupt"); + + ret = ixp4xx_irq_setup(ixi, base, fwnode, is_356); + if (ret) + pr_crit("IXP4XX: failed to set up irqchip\n"); + + return ret; +} +IRQCHIP_DECLARE(ixp42x, "intel,ixp42x-interrupt", + ixp4xx_of_init_irq); +IRQCHIP_DECLARE(ixp43x, "intel,ixp43x-interrupt", + ixp4xx_of_init_irq); +IRQCHIP_DECLARE(ixp45x, "intel,ixp45x-interrupt", + ixp4xx_of_init_irq); +IRQCHIP_DECLARE(ixp46x, "intel,ixp46x-interrupt", + ixp4xx_of_init_irq); +#endif diff --git a/drivers/memory/emif.h b/drivers/memory/emif.h index 9e9f8037955d..6b71fadb3cfa 100644 --- a/drivers/memory/emif.h +++ b/drivers/memory/emif.h @@ -537,6 +537,9 @@ #define MCONNID_SHIFT 0 #define MCONNID_MASK (0xff << 0) +/* READ_WRITE_LEVELING_CONTROL */ +#define RDWRLVLFULL_START 0x80000000 + /* DDR_PHY_CTRL_1 - EMIF4D */ #define DLL_SLAVE_DLY_CTRL_SHIFT_4D 4 #define DLL_SLAVE_DLY_CTRL_MASK_4D (0xFF << 4) @@ -598,6 +601,7 @@ extern struct emif_regs_amx3 ti_emif_regs_amx3; void ti_emif_save_context(void); void ti_emif_restore_context(void); +void ti_emif_run_hw_leveling(void); void ti_emif_enter_sr(void); void ti_emif_exit_sr(void); void ti_emif_abort_sr(void); diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c index 0a53598d982f..163b6c69e651 100644 --- a/drivers/memory/tegra/mc.c +++ b/drivers/memory/tegra/mc.c @@ -51,6 +51,9 @@ #define MC_EMEM_ADR_CFG 0x54 #define MC_EMEM_ADR_CFG_EMEM_NUMDEV BIT(0) +#define MC_TIMING_CONTROL 0xfc +#define MC_TIMING_UPDATE BIT(0) + static const struct of_device_id tegra_mc_of_match[] = { #ifdef CONFIG_ARCH_TEGRA_2x_SOC { .compatible = "nvidia,tegra20-mc-gart", .data = &tegra20_mc_soc }, @@ -74,7 +77,7 @@ static const struct of_device_id tegra_mc_of_match[] = { }; MODULE_DEVICE_TABLE(of, tegra_mc_of_match); -static int terga_mc_block_dma_common(struct tegra_mc *mc, +static int tegra_mc_block_dma_common(struct tegra_mc *mc, const struct tegra_mc_reset *rst) { unsigned long flags; @@ -90,13 +93,13 @@ static int terga_mc_block_dma_common(struct tegra_mc *mc, return 0; } -static bool terga_mc_dma_idling_common(struct tegra_mc *mc, +static bool tegra_mc_dma_idling_common(struct tegra_mc *mc, const struct tegra_mc_reset *rst) { return (mc_readl(mc, rst->status) & BIT(rst->bit)) != 0; } -static int terga_mc_unblock_dma_common(struct tegra_mc *mc, +static int tegra_mc_unblock_dma_common(struct tegra_mc *mc, const struct tegra_mc_reset *rst) { unsigned long flags; @@ -112,17 +115,17 @@ static int terga_mc_unblock_dma_common(struct tegra_mc *mc, return 0; } -static int terga_mc_reset_status_common(struct tegra_mc *mc, +static int tegra_mc_reset_status_common(struct tegra_mc *mc, const struct tegra_mc_reset *rst) { return (mc_readl(mc, rst->control) & BIT(rst->bit)) != 0; } -const struct tegra_mc_reset_ops terga_mc_reset_ops_common = { - .block_dma = terga_mc_block_dma_common, - .dma_idling = terga_mc_dma_idling_common, - .unblock_dma = terga_mc_unblock_dma_common, - .reset_status = terga_mc_reset_status_common, +const struct tegra_mc_reset_ops tegra_mc_reset_ops_common = { + .block_dma = tegra_mc_block_dma_common, + .dma_idling = tegra_mc_dma_idling_common, + .unblock_dma = tegra_mc_unblock_dma_common, + .reset_status = tegra_mc_reset_status_common, }; static inline struct tegra_mc *reset_to_mc(struct reset_controller_dev *rcdev) @@ -282,25 +285,28 @@ static int tegra_mc_setup_latency_allowance(struct tegra_mc *mc) u32 value; /* compute the number of MC clock cycles per tick */ - tick = mc->tick * clk_get_rate(mc->clk); + tick = (unsigned long long)mc->tick * clk_get_rate(mc->clk); do_div(tick, NSEC_PER_SEC); - value = readl(mc->regs + MC_EMEM_ARB_CFG); + value = mc_readl(mc, MC_EMEM_ARB_CFG); value &= ~MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK; value |= MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE(tick); - writel(value, mc->regs + MC_EMEM_ARB_CFG); + mc_writel(mc, value, MC_EMEM_ARB_CFG); /* write latency allowance defaults */ for (i = 0; i < mc->soc->num_clients; i++) { const struct tegra_mc_la *la = &mc->soc->clients[i].la; u32 value; - value = readl(mc->regs + la->reg); + value = mc_readl(mc, la->reg); value &= ~(la->mask << la->shift); value |= (la->def & la->mask) << la->shift; - writel(value, mc->regs + la->reg); + mc_writel(mc, value, la->reg); } + /* latch new values */ + mc_writel(mc, MC_TIMING_UPDATE, MC_TIMING_CONTROL); + return 0; } diff --git a/drivers/memory/tegra/mc.h b/drivers/memory/tegra/mc.h index 887a3b07334f..392993955c93 100644 --- a/drivers/memory/tegra/mc.h +++ b/drivers/memory/tegra/mc.h @@ -35,7 +35,7 @@ static inline void mc_writel(struct tegra_mc *mc, u32 value, writel_relaxed(value, mc->regs + offset); } -extern const struct tegra_mc_reset_ops terga_mc_reset_ops_common; +extern const struct tegra_mc_reset_ops tegra_mc_reset_ops_common; #ifdef CONFIG_ARCH_TEGRA_2x_SOC extern const struct tegra_mc_soc tegra20_mc_soc; diff --git a/drivers/memory/tegra/tegra114.c b/drivers/memory/tegra/tegra114.c index 6560a5101322..62305fafd641 100644 --- a/drivers/memory/tegra/tegra114.c +++ b/drivers/memory/tegra/tegra114.c @@ -572,7 +572,7 @@ static const struct tegra_mc_client tegra114_mc_clients[] = { }, }, { .id = 0x34, - .name = "fdcwr2", + .name = "fdcdwr2", .swgroup = TEGRA_SWGROUP_NV, .smmu = { .reg = 0x22c, @@ -975,7 +975,7 @@ const struct tegra_mc_soc tegra114_mc_soc = { .smmu = &tegra114_smmu_soc, .intmask = MC_INT_INVALID_SMMU_PAGE | MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM, - .reset_ops = &terga_mc_reset_ops_common, + .reset_ops = &tegra_mc_reset_ops_common, .resets = tegra114_mc_resets, .num_resets = ARRAY_SIZE(tegra114_mc_resets), }; diff --git a/drivers/memory/tegra/tegra124.c b/drivers/memory/tegra/tegra124.c index b561a1fe7f46..8f8487bda642 100644 --- a/drivers/memory/tegra/tegra124.c +++ b/drivers/memory/tegra/tegra124.c @@ -1074,7 +1074,7 @@ const struct tegra_mc_soc tegra124_mc_soc = { .intmask = MC_INT_DECERR_MTS | MC_INT_SECERR_SEC | MC_INT_DECERR_VPR | MC_INT_INVALID_APB_ASID_UPDATE | MC_INT_INVALID_SMMU_PAGE | MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM, - .reset_ops = &terga_mc_reset_ops_common, + .reset_ops = &tegra_mc_reset_ops_common, .resets = tegra124_mc_resets, .num_resets = ARRAY_SIZE(tegra124_mc_resets), }; @@ -1104,7 +1104,7 @@ const struct tegra_mc_soc tegra132_mc_soc = { .intmask = MC_INT_DECERR_MTS | MC_INT_SECERR_SEC | MC_INT_DECERR_VPR | MC_INT_INVALID_APB_ASID_UPDATE | MC_INT_INVALID_SMMU_PAGE | MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM, - .reset_ops = &terga_mc_reset_ops_common, + .reset_ops = &tegra_mc_reset_ops_common, .resets = tegra124_mc_resets, .num_resets = ARRAY_SIZE(tegra124_mc_resets), }; diff --git a/drivers/memory/tegra/tegra20.c b/drivers/memory/tegra/tegra20.c index 7119e532471c..121237b16add 100644 --- a/drivers/memory/tegra/tegra20.c +++ b/drivers/memory/tegra/tegra20.c @@ -198,7 +198,7 @@ static const struct tegra_mc_reset tegra20_mc_resets[] = { TEGRA20_MC_RESET(VI, 0x100, 0x178, 0x104, 14), }; -static int terga20_mc_hotreset_assert(struct tegra_mc *mc, +static int tegra20_mc_hotreset_assert(struct tegra_mc *mc, const struct tegra_mc_reset *rst) { unsigned long flags; @@ -214,7 +214,7 @@ static int terga20_mc_hotreset_assert(struct tegra_mc *mc, return 0; } -static int terga20_mc_hotreset_deassert(struct tegra_mc *mc, +static int tegra20_mc_hotreset_deassert(struct tegra_mc *mc, const struct tegra_mc_reset *rst) { unsigned long flags; @@ -230,7 +230,7 @@ static int terga20_mc_hotreset_deassert(struct tegra_mc *mc, return 0; } -static int terga20_mc_block_dma(struct tegra_mc *mc, +static int tegra20_mc_block_dma(struct tegra_mc *mc, const struct tegra_mc_reset *rst) { unsigned long flags; @@ -246,19 +246,19 @@ static int terga20_mc_block_dma(struct tegra_mc *mc, return 0; } -static bool terga20_mc_dma_idling(struct tegra_mc *mc, +static bool tegra20_mc_dma_idling(struct tegra_mc *mc, const struct tegra_mc_reset *rst) { return mc_readl(mc, rst->status) == 0; } -static int terga20_mc_reset_status(struct tegra_mc *mc, +static int tegra20_mc_reset_status(struct tegra_mc *mc, const struct tegra_mc_reset *rst) { return (mc_readl(mc, rst->reset) & BIT(rst->bit)) == 0; } -static int terga20_mc_unblock_dma(struct tegra_mc *mc, +static int tegra20_mc_unblock_dma(struct tegra_mc *mc, const struct tegra_mc_reset *rst) { unsigned long flags; @@ -274,13 +274,13 @@ static int terga20_mc_unblock_dma(struct tegra_mc *mc, return 0; } -const struct tegra_mc_reset_ops terga20_mc_reset_ops = { - .hotreset_assert = terga20_mc_hotreset_assert, - .hotreset_deassert = terga20_mc_hotreset_deassert, - .block_dma = terga20_mc_block_dma, - .dma_idling = terga20_mc_dma_idling, - .unblock_dma = terga20_mc_unblock_dma, - .reset_status = terga20_mc_reset_status, +static const struct tegra_mc_reset_ops tegra20_mc_reset_ops = { + .hotreset_assert = tegra20_mc_hotreset_assert, + .hotreset_deassert = tegra20_mc_hotreset_deassert, + .block_dma = tegra20_mc_block_dma, + .dma_idling = tegra20_mc_dma_idling, + .unblock_dma = tegra20_mc_unblock_dma, + .reset_status = tegra20_mc_reset_status, }; const struct tegra_mc_soc tegra20_mc_soc = { @@ -290,7 +290,7 @@ const struct tegra_mc_soc tegra20_mc_soc = { .client_id_mask = 0x3f, .intmask = MC_INT_SECURITY_VIOLATION | MC_INT_INVALID_GART_PAGE | MC_INT_DECERR_EMEM, - .reset_ops = &terga20_mc_reset_ops, + .reset_ops = &tegra20_mc_reset_ops, .resets = tegra20_mc_resets, .num_resets = ARRAY_SIZE(tegra20_mc_resets), }; diff --git a/drivers/memory/tegra/tegra210.c b/drivers/memory/tegra/tegra210.c index d00a77160407..aa22cda637eb 100644 --- a/drivers/memory/tegra/tegra210.c +++ b/drivers/memory/tegra/tegra210.c @@ -1132,7 +1132,7 @@ const struct tegra_mc_soc tegra210_mc_soc = { .intmask = MC_INT_DECERR_MTS | MC_INT_SECERR_SEC | MC_INT_DECERR_VPR | MC_INT_INVALID_APB_ASID_UPDATE | MC_INT_INVALID_SMMU_PAGE | MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM, - .reset_ops = &terga_mc_reset_ops_common, + .reset_ops = &tegra_mc_reset_ops_common, .resets = tegra210_mc_resets, .num_resets = ARRAY_SIZE(tegra210_mc_resets), }; diff --git a/drivers/memory/tegra/tegra30.c b/drivers/memory/tegra/tegra30.c index bee5314ed404..c9af0f682ead 100644 --- a/drivers/memory/tegra/tegra30.c +++ b/drivers/memory/tegra/tegra30.c @@ -726,7 +726,7 @@ static const struct tegra_mc_client tegra30_mc_clients[] = { }, }, { .id = 0x34, - .name = "fdcwr2", + .name = "fdcdwr2", .swgroup = TEGRA_SWGROUP_NV2, .smmu = { .reg = 0x22c, @@ -999,7 +999,7 @@ const struct tegra_mc_soc tegra30_mc_soc = { .smmu = &tegra30_smmu_soc, .intmask = MC_INT_INVALID_SMMU_PAGE | MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM, - .reset_ops = &terga_mc_reset_ops_common, + .reset_ops = &tegra_mc_reset_ops_common, .resets = tegra30_mc_resets, .num_resets = ARRAY_SIZE(tegra30_mc_resets), }; diff --git a/drivers/memory/ti-emif-pm.c b/drivers/memory/ti-emif-pm.c index 2250d03ea17f..ab07aa163138 100644 --- a/drivers/memory/ti-emif-pm.c +++ b/drivers/memory/ti-emif-pm.c @@ -138,6 +138,9 @@ static int ti_emif_alloc_sram(struct device *dev, emif_data->pm_functions.exit_sr = sram_resume_address(emif_data, (unsigned long)ti_emif_exit_sr); + emif_data->pm_functions.run_hw_leveling = + sram_resume_address(emif_data, + (unsigned long)ti_emif_run_hw_leveling); emif_data->pm_data.regs_virt = (struct emif_regs_amx3 *)emif_data->ti_emif_sram_data_virt; diff --git a/drivers/memory/ti-emif-sram-pm.S b/drivers/memory/ti-emif-sram-pm.S index a5369181e5c2..d75ae18efa7d 100644 --- a/drivers/memory/ti-emif-sram-pm.S +++ b/drivers/memory/ti-emif-sram-pm.S @@ -27,6 +27,7 @@ #define EMIF_POWER_MGMT_SELF_REFRESH_MODE_MASK 0x0700 #define EMIF_SDCFG_TYPE_DDR2 0x2 << SDRAM_TYPE_SHIFT +#define EMIF_SDCFG_TYPE_DDR3 0x3 << SDRAM_TYPE_SHIFT #define EMIF_STATUS_READY 0x4 #define AM43XX_EMIF_PHY_CTRL_REG_COUNT 0x120 @@ -245,6 +246,46 @@ emif_skip_restore_extra_regs: ENDPROC(ti_emif_restore_context) /* + * void ti_emif_run_hw_leveling(void) + * + * Used during resume to run hardware leveling again and restore the + * configuration of the EMIF PHY, only for DDR3. + */ +ENTRY(ti_emif_run_hw_leveling) + adr r4, ti_emif_pm_sram_data + ldr r0, [r4, #EMIF_PM_BASE_ADDR_PHYS_OFFSET] + + ldr r3, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL] + orr r3, r3, #RDWRLVLFULL_START + ldr r2, [r0, #EMIF_SDRAM_CONFIG] + and r2, r2, #SDRAM_TYPE_MASK + cmp r2, #EMIF_SDCFG_TYPE_DDR3 + bne skip_hwlvl + + str r3, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL] + + /* + * If EMIF registers are touched during initial stage of HW + * leveling sequence there will be an L3 NOC timeout error issued + * as the EMIF will not respond, which is not fatal, but it is + * avoidable. This small wait loop is enough time for this condition + * to clear, even at worst case of CPU running at max speed of 1Ghz. + */ + mov r2, #0x2000 +1: + subs r2, r2, #0x1 + bne 1b + + /* Bit clears when operation is complete */ +2: ldr r1, [r0, #EMIF_READ_WRITE_LEVELING_CONTROL] + tst r1, #RDWRLVLFULL_START + bne 2b + +skip_hwlvl: + mov pc, lr +ENDPROC(ti_emif_run_hw_leveling) + +/* * void ti_emif_enter_sr(void) * * Programs the EMIF to tell the SDRAM to enter into self-refresh diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 3209ee020b15..a43bd9a9da20 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -504,22 +504,6 @@ config ASPEED_P2A_CTRL ioctl()s, the driver also provides an interface for userspace mappings to a pre-defined region. -config ASPEED_LPC_CTRL - depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON - tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control" - ---help--- - Control Aspeed ast2400/2500 HOST LPC to BMC mappings through - ioctl()s, the driver also provides a read/write interface to a BMC ram - region where the host LPC read/write region can be buffered. - -config ASPEED_LPC_SNOOP - tristate "Aspeed ast2500 HOST LPC snoop support" - depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON - help - Provides a driver to control the LPC snoop interface which - allows the BMC to listen on and save the data written by - the host to an arbitrary LPC I/O port. - config PCI_ENDPOINT_TEST depends on PCI select CRC32 diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index c36239573a5c..a2127e8b0ed6 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -54,8 +54,6 @@ obj-$(CONFIG_GENWQE) += genwqe/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o obj-$(CONFIG_CXL_BASE) += cxl/ -obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o -obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o obj-$(CONFIG_ASPEED_P2A_CTRL) += aspeed-p2a-ctrl.o obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o obj-$(CONFIG_OCXL) += ocxl/ diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index e9a0213b08c4..6238e6951336 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -41,7 +41,7 @@ config CS89x0_PLATFORM config EP93XX_ETH tristate "EP93xx Ethernet support" - depends on ARM && ARCH_EP93XX + depends on (ARM && ARCH_EP93XX) || COMPILE_TEST select MII help This is a driver for the ethernet hardware included in EP93xx CPUs. diff --git a/drivers/net/ethernet/cirrus/ep93xx_eth.c b/drivers/net/ethernet/cirrus/ep93xx_eth.c index 13dfdfca49fc..a6da9873570b 100644 --- a/drivers/net/ethernet/cirrus/ep93xx_eth.c +++ b/drivers/net/ethernet/cirrus/ep93xx_eth.c @@ -25,7 +25,7 @@ #include <linux/io.h> #include <linux/slab.h> -#include <mach/hardware.h> +#include <linux/platform_data/eth-ep93xx.h> #define DRV_MODULE_NAME "ep93xx-eth" #define DRV_MODULE_VERSION "0.1" diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index ed6623a9801e..319db3ece263 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -31,14 +31,15 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/net_tstamp.h> +#include <linux/of.h> #include <linux/phy.h> #include <linux/platform_device.h> #include <linux/ptp_classify.h> #include <linux/slab.h> #include <linux/module.h> #include <mach/ixp46x_ts.h> -#include <mach/npe.h> -#include <mach/qmgr.h> +#include <linux/soc/ixp4xx/npe.h> +#include <linux/soc/ixp4xx/qmgr.h> #define DEBUG_DESC 0 #define DEBUG_RX 0 @@ -1497,6 +1498,15 @@ static struct platform_driver ixp4xx_eth_driver = { static int __init eth_init_module(void) { int err; + + /* + * FIXME: we bail out on device tree boot but this really needs + * to be fixed in a nicer way: this registers the MDIO bus before + * even matching the driver infrastructure, we should only probe + * detected hardware. + */ + if (of_have_populated_dt()) + return -ENODEV; if ((err = ixp4xx_mdio_register())) return err; return platform_driver_register(&ixp4xx_eth_driver); diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 5c60dc60a8e6..46a05b6540b8 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -22,8 +22,8 @@ #include <linux/platform_device.h> #include <linux/poll.h> #include <linux/slab.h> -#include <mach/npe.h> -#include <mach/qmgr.h> +#include <linux/soc/ixp4xx/npe.h> +#include <linux/soc/ixp4xx/qmgr.h> #define DEBUG_DESC 0 #define DEBUG_RX 0 diff --git a/drivers/nvmem/zynqmp_nvmem.c b/drivers/nvmem/zynqmp_nvmem.c index 490c8fcaec80..5893543918c8 100644 --- a/drivers/nvmem/zynqmp_nvmem.c +++ b/drivers/nvmem/zynqmp_nvmem.c @@ -16,6 +16,8 @@ struct zynqmp_nvmem_data { struct nvmem_device *nvmem; }; +static const struct zynqmp_eemi_ops *eemi_ops; + static int zynqmp_nvmem_read(void *context, unsigned int offset, void *val, size_t bytes) { @@ -23,9 +25,7 @@ static int zynqmp_nvmem_read(void *context, unsigned int offset, int idcode, version; struct zynqmp_nvmem_data *priv = context; - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); - - if (!eemi_ops || !eemi_ops->get_chipid) + if (!eemi_ops->get_chipid) return -ENXIO; ret = eemi_ops->get_chipid(&idcode, &version); @@ -61,6 +61,10 @@ static int zynqmp_nvmem_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; + eemi_ops = zynqmp_pm_get_eemi_ops(); + if (IS_ERR(eemi_ops)) + return PTR_ERR(eemi_ops); + priv->dev = dev; econfig.dev = dev; econfig.reg_read = zynqmp_nvmem_read; diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c index bbf10ae02f0e..fa168581e6b8 100644 --- a/drivers/pwm/pwm-ep93xx.c +++ b/drivers/pwm/pwm-ep93xx.c @@ -35,7 +35,7 @@ #include <asm/div64.h> -#include <mach/platform.h> /* for ep93xx_pwm_{acquire,release}_gpio() */ +#include <linux/soc/cirrus/ep93xx.h> /* for ep93xx_pwm_{acquire,release}_gpio() */ #define EP93XX_PWMx_TERM_COUNT 0x00 #define EP93XX_PWMx_DUTY_CYCLE 0x04 diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c index 2ef1f13aa47b..99e75d92dada 100644 --- a/drivers/reset/reset-zynqmp.c +++ b/drivers/reset/reset-zynqmp.c @@ -79,11 +79,11 @@ static int zynqmp_reset_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; - platform_set_drvdata(pdev, priv); - priv->eemi_ops = zynqmp_pm_get_eemi_ops(); - if (!priv->eemi_ops) - return -ENXIO; + if (IS_ERR(priv->eemi_ops)) + return PTR_ERR(priv->eemi_ops); + + platform_set_drvdata(pdev, priv); priv->rcdev.ops = &zynqmp_reset_ops; priv->rcdev.owner = THIS_MODULE; diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 32994b0dd139..a2941c875a06 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -403,15 +403,12 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) static struct omap_rtc *omap_rtc_power_off_rtc; -/* - * omap_rtc_poweroff: RTC-controlled power off - * - * The RTC can be used to control an external PMIC via the pmic_power_en pin, - * which can be configured to transition to OFF on ALARM2 events. - * - * Called with local interrupts disabled. +/** + * omap_rtc_power_off_program: Set the pmic power off sequence. The RTC + * generates pmic_pwr_enable control, which can be used to control an external + * PMIC. */ -static void omap_rtc_power_off(void) +int omap_rtc_power_off_program(struct device *dev) { struct omap_rtc *rtc = omap_rtc_power_off_rtc; struct rtc_time tm; @@ -425,6 +422,9 @@ static void omap_rtc_power_off(void) rtc_writel(rtc, OMAP_RTC_PMIC_REG, val | OMAP_RTC_PMIC_POWER_EN_EN); again: + /* Clear any existing ALARM2 event */ + rtc_writel(rtc, OMAP_RTC_STATUS_REG, OMAP_RTC_STATUS_ALARM2); + /* set alarm one second from now */ omap_rtc_read_time_raw(rtc, &tm); seconds = tm.tm_sec; @@ -461,6 +461,39 @@ again: rtc->type->lock(rtc); + return 0; +} +EXPORT_SYMBOL(omap_rtc_power_off_program); + +/* + * omap_rtc_poweroff: RTC-controlled power off + * + * The RTC can be used to control an external PMIC via the pmic_power_en pin, + * which can be configured to transition to OFF on ALARM2 events. + * + * Notes: + * The one-second alarm offset is the shortest offset possible as the alarm + * registers must be set before the next timer update and the offset + * calculation is too heavy for everything to be done within a single access + * period (~15 us). + * + * Called with local interrupts disabled. + */ +static void omap_rtc_power_off(void) +{ + struct rtc_device *rtc = omap_rtc_power_off_rtc->rtc; + u32 val; + + omap_rtc_power_off_program(rtc->dev.parent); + + /* Set PMIC power enable and EXT_WAKEUP in case PB power on is used */ + omap_rtc_power_off_rtc->type->unlock(omap_rtc_power_off_rtc); + val = rtc_readl(omap_rtc_power_off_rtc, OMAP_RTC_PMIC_REG); + val |= OMAP_RTC_PMIC_POWER_EN_EN | OMAP_RTC_PMIC_EXT_WKUP_POL(0) | + OMAP_RTC_PMIC_EXT_WKUP_EN(0); + rtc_writel(omap_rtc_power_off_rtc, OMAP_RTC_PMIC_REG, val); + omap_rtc_power_off_rtc->type->lock(omap_rtc_power_off_rtc); + /* * Wait for alarm to trigger (within one second) and external PMIC to * power off the system. Add a 500 ms margin for external latencies diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index c07b4a85253f..75bdbb2c5140 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -2,10 +2,12 @@ menu "SOC (System On Chip) specific Drivers" source "drivers/soc/actions/Kconfig" source "drivers/soc/amlogic/Kconfig" +source "drivers/soc/aspeed/Kconfig" source "drivers/soc/atmel/Kconfig" source "drivers/soc/bcm/Kconfig" source "drivers/soc/fsl/Kconfig" source "drivers/soc/imx/Kconfig" +source "drivers/soc/ixp4xx/Kconfig" source "drivers/soc/mediatek/Kconfig" source "drivers/soc/qcom/Kconfig" source "drivers/soc/renesas/Kconfig" diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index 90b686e586c6..ec0e8d6f6e0f 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -4,6 +4,7 @@ # obj-$(CONFIG_ARCH_ACTIONS) += actions/ +obj-$(CONFIG_ARCH_ASPEED) += aspeed/ obj-$(CONFIG_ARCH_AT91) += atmel/ obj-y += bcm/ obj-$(CONFIG_ARCH_DOVE) += dove/ @@ -11,6 +12,7 @@ obj-$(CONFIG_MACH_DOVE) += dove/ obj-y += fsl/ obj-$(CONFIG_ARCH_GEMINI) += gemini/ obj-$(CONFIG_ARCH_MXC) += imx/ +obj-$(CONFIG_ARCH_IXP4XX) += ixp4xx/ obj-$(CONFIG_SOC_XWAY) += lantiq/ obj-y += mediatek/ obj-y += amlogic/ diff --git a/drivers/soc/amlogic/meson-gx-pwrc-vpu.c b/drivers/soc/amlogic/meson-gx-pwrc-vpu.c index 6289965c42e9..511b6856225d 100644 --- a/drivers/soc/amlogic/meson-gx-pwrc-vpu.c +++ b/drivers/soc/amlogic/meson-gx-pwrc-vpu.c @@ -11,6 +11,7 @@ #include <linux/bitfield.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> +#include <linux/of_device.h> #include <linux/reset.h> #include <linux/clk.h> @@ -26,6 +27,7 @@ #define HHI_MEM_PD_REG0 (0x40 << 2) #define HHI_VPU_MEM_PD_REG0 (0x41 << 2) #define HHI_VPU_MEM_PD_REG1 (0x42 << 2) +#define HHI_VPU_MEM_PD_REG2 (0x4d << 2) struct meson_gx_pwrc_vpu { struct generic_pm_domain genpd; @@ -54,12 +56,55 @@ static int meson_gx_pwrc_vpu_power_off(struct generic_pm_domain *genpd) /* Power Down Memories */ for (i = 0; i < 32; i += 2) { regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG0, - 0x2 << i, 0x3 << i); + 0x3 << i, 0x3 << i); udelay(5); } for (i = 0; i < 32; i += 2) { regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG1, - 0x2 << i, 0x3 << i); + 0x3 << i, 0x3 << i); + udelay(5); + } + for (i = 8; i < 16; i++) { + regmap_update_bits(pd->regmap_hhi, HHI_MEM_PD_REG0, + BIT(i), BIT(i)); + udelay(5); + } + udelay(20); + + regmap_update_bits(pd->regmap_ao, AO_RTI_GEN_PWR_SLEEP0, + GEN_PWR_VPU_HDMI, GEN_PWR_VPU_HDMI); + + msleep(20); + + clk_disable_unprepare(pd->vpu_clk); + clk_disable_unprepare(pd->vapb_clk); + + return 0; +} + +static int meson_g12a_pwrc_vpu_power_off(struct generic_pm_domain *genpd) +{ + struct meson_gx_pwrc_vpu *pd = genpd_to_pd(genpd); + int i; + + regmap_update_bits(pd->regmap_ao, AO_RTI_GEN_PWR_SLEEP0, + GEN_PWR_VPU_HDMI_ISO, GEN_PWR_VPU_HDMI_ISO); + udelay(20); + + /* Power Down Memories */ + for (i = 0; i < 32; i += 2) { + regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG0, + 0x3 << i, 0x3 << i); + udelay(5); + } + for (i = 0; i < 32; i += 2) { + regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG1, + 0x3 << i, 0x3 << i); + udelay(5); + } + for (i = 0; i < 32; i += 2) { + regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG2, + 0x3 << i, 0x3 << i); udelay(5); } for (i = 8; i < 16; i++) { @@ -108,13 +153,67 @@ static int meson_gx_pwrc_vpu_power_on(struct generic_pm_domain *genpd) /* Power Up Memories */ for (i = 0; i < 32; i += 2) { regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG0, - 0x2 << i, 0); + 0x3 << i, 0); + udelay(5); + } + + for (i = 0; i < 32; i += 2) { + regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG1, + 0x3 << i, 0); + udelay(5); + } + + for (i = 8; i < 16; i++) { + regmap_update_bits(pd->regmap_hhi, HHI_MEM_PD_REG0, + BIT(i), 0); + udelay(5); + } + udelay(20); + + ret = reset_control_assert(pd->rstc); + if (ret) + return ret; + + regmap_update_bits(pd->regmap_ao, AO_RTI_GEN_PWR_SLEEP0, + GEN_PWR_VPU_HDMI_ISO, 0); + + ret = reset_control_deassert(pd->rstc); + if (ret) + return ret; + + ret = meson_gx_pwrc_vpu_setup_clk(pd); + if (ret) + return ret; + + return 0; +} + +static int meson_g12a_pwrc_vpu_power_on(struct generic_pm_domain *genpd) +{ + struct meson_gx_pwrc_vpu *pd = genpd_to_pd(genpd); + int ret; + int i; + + regmap_update_bits(pd->regmap_ao, AO_RTI_GEN_PWR_SLEEP0, + GEN_PWR_VPU_HDMI, 0); + udelay(20); + + /* Power Up Memories */ + for (i = 0; i < 32; i += 2) { + regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG0, + 0x3 << i, 0); udelay(5); } for (i = 0; i < 32; i += 2) { regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG1, - 0x2 << i, 0); + 0x3 << i, 0); + udelay(5); + } + + for (i = 0; i < 32; i += 2) { + regmap_update_bits(pd->regmap_hhi, HHI_VPU_MEM_PD_REG2, + 0x3 << i, 0); udelay(5); } @@ -160,15 +259,37 @@ static struct meson_gx_pwrc_vpu vpu_hdmi_pd = { }, }; +static struct meson_gx_pwrc_vpu vpu_hdmi_pd_g12a = { + .genpd = { + .name = "vpu_hdmi", + .power_off = meson_g12a_pwrc_vpu_power_off, + .power_on = meson_g12a_pwrc_vpu_power_on, + }, +}; + static int meson_gx_pwrc_vpu_probe(struct platform_device *pdev) { + const struct meson_gx_pwrc_vpu *vpu_pd_match; struct regmap *regmap_ao, *regmap_hhi; + struct meson_gx_pwrc_vpu *vpu_pd; struct reset_control *rstc; struct clk *vpu_clk; struct clk *vapb_clk; bool powered_off; int ret; + vpu_pd_match = of_device_get_match_data(&pdev->dev); + if (!vpu_pd_match) { + dev_err(&pdev->dev, "failed to get match data\n"); + return -ENODEV; + } + + vpu_pd = devm_kzalloc(&pdev->dev, sizeof(*vpu_pd), GFP_KERNEL); + if (!vpu_pd) + return -ENOMEM; + + memcpy(vpu_pd, vpu_pd_match, sizeof(*vpu_pd)); + regmap_ao = syscon_node_to_regmap(of_get_parent(pdev->dev.of_node)); if (IS_ERR(regmap_ao)) { dev_err(&pdev->dev, "failed to get regmap\n"); @@ -201,39 +322,46 @@ static int meson_gx_pwrc_vpu_probe(struct platform_device *pdev) return PTR_ERR(vapb_clk); } - vpu_hdmi_pd.regmap_ao = regmap_ao; - vpu_hdmi_pd.regmap_hhi = regmap_hhi; - vpu_hdmi_pd.rstc = rstc; - vpu_hdmi_pd.vpu_clk = vpu_clk; - vpu_hdmi_pd.vapb_clk = vapb_clk; + vpu_pd->regmap_ao = regmap_ao; + vpu_pd->regmap_hhi = regmap_hhi; + vpu_pd->rstc = rstc; + vpu_pd->vpu_clk = vpu_clk; + vpu_pd->vapb_clk = vapb_clk; + + platform_set_drvdata(pdev, vpu_pd); - powered_off = meson_gx_pwrc_vpu_get_power(&vpu_hdmi_pd); + powered_off = meson_gx_pwrc_vpu_get_power(vpu_pd); /* If already powered, sync the clock states */ if (!powered_off) { - ret = meson_gx_pwrc_vpu_setup_clk(&vpu_hdmi_pd); + ret = meson_gx_pwrc_vpu_setup_clk(vpu_pd); if (ret) return ret; } - pm_genpd_init(&vpu_hdmi_pd.genpd, &pm_domain_always_on_gov, + pm_genpd_init(&vpu_pd->genpd, &pm_domain_always_on_gov, powered_off); return of_genpd_add_provider_simple(pdev->dev.of_node, - &vpu_hdmi_pd.genpd); + &vpu_pd->genpd); } static void meson_gx_pwrc_vpu_shutdown(struct platform_device *pdev) { + struct meson_gx_pwrc_vpu *vpu_pd = platform_get_drvdata(pdev); bool powered_off; - powered_off = meson_gx_pwrc_vpu_get_power(&vpu_hdmi_pd); + powered_off = meson_gx_pwrc_vpu_get_power(vpu_pd); if (!powered_off) - meson_gx_pwrc_vpu_power_off(&vpu_hdmi_pd.genpd); + vpu_pd->genpd.power_off(&vpu_pd->genpd); } static const struct of_device_id meson_gx_pwrc_vpu_match_table[] = { - { .compatible = "amlogic,meson-gx-pwrc-vpu" }, + { .compatible = "amlogic,meson-gx-pwrc-vpu", .data = &vpu_hdmi_pd }, + { + .compatible = "amlogic,meson-g12a-pwrc-vpu", + .data = &vpu_hdmi_pd_g12a + }, { /* sentinel */ } }; diff --git a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c index 37ea0a1c24c8..bca34954518e 100644 --- a/drivers/soc/amlogic/meson-gx-socinfo.c +++ b/drivers/soc/amlogic/meson-gx-socinfo.c @@ -37,26 +37,34 @@ static const struct meson_gx_soc_id { { "AXG", 0x25 }, { "GXLX", 0x26 }, { "TXHD", 0x27 }, + { "G12A", 0x28 }, + { "G12B", 0x29 }, }; static const struct meson_gx_package_id { const char *name; unsigned int major_id; unsigned int pack_id; + unsigned int pack_mask; } soc_packages[] = { - { "S905", 0x1f, 0 }, - { "S905H", 0x1f, 0x13 }, - { "S905M", 0x1f, 0x20 }, - { "S905D", 0x21, 0 }, - { "S905X", 0x21, 0x80 }, - { "S905W", 0x21, 0xa0 }, - { "S905L", 0x21, 0xc0 }, - { "S905M2", 0x21, 0xe0 }, - { "S912", 0x22, 0 }, - { "962X", 0x24, 0x10 }, - { "962E", 0x24, 0x20 }, - { "A113X", 0x25, 0x37 }, - { "A113D", 0x25, 0x22 }, + { "S905", 0x1f, 0, 0x20 }, /* pack_id != 0x20 */ + { "S905H", 0x1f, 0x3, 0xf }, /* pack_id & 0xf == 0x3 */ + { "S905M", 0x1f, 0x20, 0xf0 }, /* pack_id == 0x20 */ + { "S905D", 0x21, 0, 0xf0 }, + { "S905X", 0x21, 0x80, 0xf0 }, + { "S905W", 0x21, 0xa0, 0xf0 }, + { "S905L", 0x21, 0xc0, 0xf0 }, + { "S905M2", 0x21, 0xe0, 0xf0 }, + { "S805X", 0x21, 0x30, 0xf0 }, + { "S805Y", 0x21, 0xb0, 0xf0 }, + { "S912", 0x22, 0, 0x0 }, /* Only S912 is known for GXM */ + { "962X", 0x24, 0x10, 0xf0 }, + { "962E", 0x24, 0x20, 0xf0 }, + { "A113X", 0x25, 0x37, 0xff }, + { "A113D", 0x25, 0x22, 0xff }, + { "S905D2", 0x28, 0x10, 0xf0 }, + { "S905X2", 0x28, 0x40, 0xf0 }, + { "S922X", 0x29, 0x40, 0xf0 }, }; static inline unsigned int socinfo_to_major(u32 socinfo) @@ -81,13 +89,14 @@ static inline unsigned int socinfo_to_misc(u32 socinfo) static const char *socinfo_to_package_id(u32 socinfo) { - unsigned int pack = socinfo_to_pack(socinfo) & 0xf0; + unsigned int pack = socinfo_to_pack(socinfo); unsigned int major = socinfo_to_major(socinfo); int i; for (i = 0 ; i < ARRAY_SIZE(soc_packages) ; ++i) { if (soc_packages[i].major_id == major && - soc_packages[i].pack_id == pack) + soc_packages[i].pack_id == + (pack & soc_packages[i].pack_mask)) return soc_packages[i].name; } @@ -123,8 +132,10 @@ static int __init meson_gx_socinfo_init(void) return -ENODEV; /* check if interface is enabled */ - if (!of_device_is_available(np)) + if (!of_device_is_available(np)) { + of_node_put(np); return -ENODEV; + } /* check if chip-id is available */ if (!of_property_read_bool(np, "amlogic,has-chip-id")) diff --git a/drivers/soc/aspeed/Kconfig b/drivers/soc/aspeed/Kconfig new file mode 100644 index 000000000000..858b5e3f79c9 --- /dev/null +++ b/drivers/soc/aspeed/Kconfig @@ -0,0 +1,20 @@ +menu "Aspeed SoC drivers" + +config ASPEED_LPC_CTRL + depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON + tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control" + ---help--- + Control Aspeed ast2400/2500 HOST LPC to BMC mappings through + ioctl()s, the driver also provides a read/write interface to a BMC ram + region where the host LPC read/write region can be buffered. + +config ASPEED_LPC_SNOOP + tristate "Aspeed ast2500 HOST LPC snoop support" + depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON + help + Provides a driver to control the LPC snoop interface which + allows the BMC to listen on and save the data written by + the host to an arbitrary LPC I/O port. + + +endmenu diff --git a/drivers/soc/aspeed/Makefile b/drivers/soc/aspeed/Makefile new file mode 100644 index 000000000000..cfaa9adc67b5 --- /dev/null +++ b/drivers/soc/aspeed/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o +obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o diff --git a/drivers/misc/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c index a024f8042259..a024f8042259 100644 --- a/drivers/misc/aspeed-lpc-ctrl.c +++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c diff --git a/drivers/misc/aspeed-lpc-snoop.c b/drivers/soc/aspeed/aspeed-lpc-snoop.c index 2feb4347d67f..2feb4347d67f 100644 --- a/drivers/misc/aspeed-lpc-snoop.c +++ b/drivers/soc/aspeed/aspeed-lpc-snoop.c diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index 506a6f3c2b9b..d6b529e06d9a 100644 --- a/drivers/soc/imx/Makefile +++ b/drivers/soc/imx/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o +obj-$(CONFIG_ARCH_MXC) += soc-imx8.o diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c index 7d14a4b4e82a..a8f1e47ce698 100644 --- a/drivers/soc/imx/gpc.c +++ b/drivers/soc/imx/gpc.c @@ -406,7 +406,6 @@ static int imx_gpc_probe(struct platform_device *pdev) const struct imx_gpc_dt_data *of_id_data = of_id->data; struct device_node *pgc_node; struct regmap *regmap; - struct resource *res; void __iomem *base; int ret; @@ -417,8 +416,7 @@ static int imx_gpc_probe(struct platform_device *pdev) !pgc_node) return 0; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(&pdev->dev, res); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c index 176f473127b6..31b8d002d855 100644 --- a/drivers/soc/imx/gpcv2.c +++ b/drivers/soc/imx/gpcv2.c @@ -136,8 +136,8 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd, GPC_PU_PGC_SW_PUP_REQ : GPC_PU_PGC_SW_PDN_REQ; const bool enable_power_control = !on; const bool has_regulator = !IS_ERR(domain->regulator); - unsigned long deadline; int i, ret = 0; + u32 pxx_req; regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING, domain->bits.map, domain->bits.map); @@ -169,30 +169,19 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd, * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait * for PUP_REQ/PDN_REQ bit to be cleared */ - deadline = jiffies + msecs_to_jiffies(1); - while (true) { - u32 pxx_req; - - regmap_read(domain->regmap, offset, &pxx_req); - - if (!(pxx_req & domain->bits.pxx)) - break; - - if (time_after(jiffies, deadline)) { - dev_err(domain->dev, "falied to command PGC\n"); - ret = -ETIMEDOUT; - /* - * If we were in a process of enabling a - * domain and failed we might as well disable - * the regulator we just enabled. And if it - * was the opposite situation and we failed to - * power down -- keep the regulator on - */ - on = !on; - break; - } - - cpu_relax(); + ret = regmap_read_poll_timeout(domain->regmap, offset, pxx_req, + !(pxx_req & domain->bits.pxx), + 0, USEC_PER_MSEC); + if (ret) { + dev_err(domain->dev, "failed to command PGC\n"); + /* + * If we were in a process of enabling a + * domain and failed we might as well disable + * the regulator we just enabled. And if it + * was the opposite situation and we failed to + * power down -- keep the regulator on + */ + on = !on; } if (enable_power_control) @@ -574,7 +563,6 @@ static int imx_gpcv2_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *pgc_np, *np; struct regmap *regmap; - struct resource *res; void __iomem *base; int ret; @@ -584,8 +572,7 @@ static int imx_gpcv2_probe(struct platform_device *pdev) return -EINVAL; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/soc/imx/soc-imx8.c b/drivers/soc/imx/soc-imx8.c new file mode 100644 index 000000000000..fc6429f9170a --- /dev/null +++ b/drivers/soc/imx/soc-imx8.c @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 NXP. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> +#include <linux/platform_device.h> +#include <linux/of.h> + +#define REV_B1 0x21 + +#define IMX8MQ_SW_INFO_B1 0x40 +#define IMX8MQ_SW_MAGIC_B1 0xff0055aa + +struct imx8_soc_data { + char *name; + u32 (*soc_revision)(void); +}; + +static u32 __init imx8mq_soc_revision(void) +{ + struct device_node *np; + void __iomem *ocotp_base; + u32 magic; + u32 rev = 0; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-ocotp"); + if (!np) + goto out; + + ocotp_base = of_iomap(np, 0); + WARN_ON(!ocotp_base); + + magic = readl_relaxed(ocotp_base + IMX8MQ_SW_INFO_B1); + if (magic == IMX8MQ_SW_MAGIC_B1) + rev = REV_B1; + + iounmap(ocotp_base); + +out: + of_node_put(np); + return rev; +} + +static const struct imx8_soc_data imx8mq_soc_data = { + .name = "i.MX8MQ", + .soc_revision = imx8mq_soc_revision, +}; + +static const struct of_device_id imx8_soc_match[] = { + { .compatible = "fsl,imx8mq", .data = &imx8mq_soc_data, }, + { } +}; + +#define imx8_revision(soc_rev) \ + soc_rev ? \ + kasprintf(GFP_KERNEL, "%d.%d", (soc_rev >> 4) & 0xf, soc_rev & 0xf) : \ + "unknown" + +static int __init imx8_soc_init(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct device_node *root; + const struct of_device_id *id; + u32 soc_rev = 0; + const struct imx8_soc_data *data; + int ret; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return -ENODEV; + + soc_dev_attr->family = "Freescale i.MX"; + + root = of_find_node_by_path("/"); + ret = of_property_read_string(root, "model", &soc_dev_attr->machine); + if (ret) + goto free_soc; + + id = of_match_node(imx8_soc_match, root); + if (!id) + goto free_soc; + + of_node_put(root); + + data = id->data; + if (data) { + soc_dev_attr->soc_id = data->name; + if (data->soc_revision) + soc_rev = data->soc_revision(); + } + + soc_dev_attr->revision = imx8_revision(soc_rev); + if (!soc_dev_attr->revision) + goto free_soc; + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) + goto free_rev; + + return 0; + +free_rev: + kfree(soc_dev_attr->revision); +free_soc: + kfree(soc_dev_attr); + of_node_put(root); + return -ENODEV; +} +device_initcall(imx8_soc_init); diff --git a/drivers/soc/ixp4xx/Kconfig b/drivers/soc/ixp4xx/Kconfig new file mode 100644 index 000000000000..de6becdc78a2 --- /dev/null +++ b/drivers/soc/ixp4xx/Kconfig @@ -0,0 +1,16 @@ +menu "IXP4xx SoC drivers" + +config IXP4XX_QMGR + tristate "IXP4xx Queue Manager support" + help + This driver supports IXP4xx built-in hardware queue manager + and is automatically selected by Ethernet and HSS drivers. + +config IXP4XX_NPE + tristate "IXP4xx Network Processor Engine support" + select FW_LOADER + help + This driver supports IXP4xx built-in network coprocessors + and is automatically selected by Ethernet and HSS drivers. + +endmenu diff --git a/drivers/soc/ixp4xx/Makefile b/drivers/soc/ixp4xx/Makefile new file mode 100644 index 000000000000..d20d99e6df65 --- /dev/null +++ b/drivers/soc/ixp4xx/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx-qmgr.o +obj-$(CONFIG_IXP4XX_NPE) += ixp4xx-npe.o diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/drivers/soc/ixp4xx/ixp4xx-npe.c index d4eb09a62863..15979d4376ab 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/drivers/soc/ixp4xx/ixp4xx-npe.c @@ -20,7 +20,9 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> -#include <mach/npe.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/soc/ixp4xx/npe.h> #define DEBUG_MSG 0 #define DEBUG_FW 0 @@ -153,16 +155,10 @@ static struct { static struct npe npe_tab[NPE_COUNT] = { { .id = 0, - .regs = (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT, - .regs_phys = IXP4XX_NPEA_BASE_PHYS, }, { .id = 1, - .regs = (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT, - .regs_phys = IXP4XX_NPEB_BASE_PHYS, }, { .id = 2, - .regs = (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT, - .regs_phys = IXP4XX_NPEC_BASE_PHYS, } }; @@ -682,28 +678,37 @@ void npe_release(struct npe *npe) module_put(THIS_MODULE); } - -static int __init npe_init_module(void) +static int ixp4xx_npe_probe(struct platform_device *pdev) { - int i, found = 0; + struct device *dev = &pdev->dev; + struct resource *res; for (i = 0; i < NPE_COUNT; i++) { struct npe *npe = &npe_tab[i]; + + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (!res) + return -ENODEV; + if (!(ixp4xx_read_feature_bits() & - (IXP4XX_FEATURE_RESET_NPEA << i))) + (IXP4XX_FEATURE_RESET_NPEA << i))) { + dev_info(dev, "NPE%d at 0x%08x-0x%08x not available\n", + i, res->start, res->end); continue; /* NPE already disabled or not present */ - if (!(npe->mem_res = request_mem_region(npe->regs_phys, - REGS_SIZE, - npe_name(npe)))) { - print_npe(KERN_ERR, npe, - "failed to request memory region\n"); - continue; } + npe->regs = devm_ioremap_resource(dev, res); + if (!npe->regs) + return -ENOMEM; - if (npe_reset(npe)) + if (npe_reset(npe)) { + dev_info(dev, "NPE%d at 0x%08x-0x%08x does not reset\n", + i, res->start, res->end); continue; + } npe->valid = 1; + dev_info(dev, "NPE%d at 0x%08x-0x%08x registered\n", + i, res->start, res->end); found++; } @@ -712,19 +717,34 @@ static int __init npe_init_module(void) return 0; } -static void __exit npe_cleanup_module(void) +static int ixp4xx_npe_remove(struct platform_device *pdev) { int i; for (i = 0; i < NPE_COUNT; i++) - if (npe_tab[i].mem_res) { + if (npe_tab[i].regs) { npe_reset(&npe_tab[i]); - release_resource(npe_tab[i].mem_res); } + + return 0; } -module_init(npe_init_module); -module_exit(npe_cleanup_module); +static const struct of_device_id ixp4xx_npe_of_match[] = { + { + .compatible = "intel,ixp4xx-network-processing-engine", + }, + {}, +}; + +static struct platform_driver ixp4xx_npe_driver = { + .driver = { + .name = "ixp4xx-npe", + .of_match_table = of_match_ptr(ixp4xx_npe_of_match), + }, + .probe = ixp4xx_npe_probe, + .remove = ixp4xx_npe_remove, +}; +module_platform_driver(ixp4xx_npe_driver); MODULE_AUTHOR("Krzysztof Halasa"); MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/drivers/soc/ixp4xx/ixp4xx-qmgr.c index 9d1b6b7c394c..13a8a13c9b01 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/drivers/soc/ixp4xx/ixp4xx-qmgr.c @@ -12,10 +12,13 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> -#include <mach/qmgr.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/soc/ixp4xx/qmgr.h> -static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; -static struct resource *mem_res; +static struct qmgr_regs __iomem *qmgr_regs; +static int qmgr_irq_1; +static int qmgr_irq_2; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ static void (*irq_handlers[QUEUES])(void *pdev); @@ -25,6 +28,94 @@ static void *irq_pdevs[QUEUES]; char qmgr_queue_descs[QUEUES][32]; #endif +void qmgr_put_entry(unsigned int queue, u32 val) +{ +#if DEBUG_QMGR + BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ + + printk(KERN_DEBUG "Queue %s(%i) put %X\n", + qmgr_queue_descs[queue], queue, val); +#endif + __raw_writel(val, &qmgr_regs->acc[queue][0]); +} + +u32 qmgr_get_entry(unsigned int queue) +{ + u32 val; + val = __raw_readl(&qmgr_regs->acc[queue][0]); +#if DEBUG_QMGR + BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ + + printk(KERN_DEBUG "Queue %s(%i) get %X\n", + qmgr_queue_descs[queue], queue, val); +#endif + return val; +} + +static int __qmgr_get_stat1(unsigned int queue) +{ + return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) + >> ((queue & 7) << 2)) & 0xF; +} + +static int __qmgr_get_stat2(unsigned int queue) +{ + BUG_ON(queue >= HALF_QUEUES); + return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) + >> ((queue & 0xF) << 1)) & 0x3; +} + +/** + * qmgr_stat_empty() - checks if a hardware queue is empty + * @queue: queue number + * + * Returns non-zero value if the queue is empty. + */ +int qmgr_stat_empty(unsigned int queue) +{ + BUG_ON(queue >= HALF_QUEUES); + return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY; +} + +/** + * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark + * @queue: queue number + * + * Returns non-zero value if the queue is below low watermark. + */ +int qmgr_stat_below_low_watermark(unsigned int queue) +{ + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statne_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY; +} + +/** + * qmgr_stat_full() - checks if a hardware queue is full + * @queue: queue number + * + * Returns non-zero value if the queue is full. + */ +int qmgr_stat_full(unsigned int queue) +{ + if (queue >= HALF_QUEUES) + return (__raw_readl(&qmgr_regs->statf_h) >> + (queue - HALF_QUEUES)) & 0x01; + return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL; +} + +/** + * qmgr_stat_overflow() - checks if a hardware queue experienced overflow + * @queue: queue number + * + * Returns non-zero value if the queue experienced overflow. + */ +int qmgr_stat_overflow(unsigned int queue) +{ + return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW; +} + void qmgr_set_irq(unsigned int queue, int src, void (*handler)(void *pdev), void *pdev) { @@ -95,7 +186,7 @@ static irqreturn_t qmgr_irq2_a0(int irq, void *pdev) static irqreturn_t qmgr_irq(int irq, void *pdev) { - int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1); + int i, half = (irq == qmgr_irq_1 ? 0 : 1); u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]); if (!req_bitmap) @@ -282,16 +373,29 @@ void qmgr_release_queue(unsigned int queue) module_put(THIS_MODULE); } -static int qmgr_init(void) +static int ixp4xx_qmgr_probe(struct platform_device *pdev) { int i, err; irq_handler_t handler1, handler2; + struct device *dev = &pdev->dev; + struct resource *res; + int irq1, irq2; - mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS, - IXP4XX_QMGR_REGION_SIZE, - "IXP4xx Queue Manager"); - if (mem_res == NULL) - return -EBUSY; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + qmgr_regs = devm_ioremap_resource(dev, res); + if (!qmgr_regs) + return -ENOMEM; + + irq1 = platform_get_irq(pdev, 0); + if (irq1 <= 0) + return irq1 ? irq1 : -EINVAL; + qmgr_irq_1 = irq1; + irq2 = platform_get_irq(pdev, 1); + if (irq2 <= 0) + return irq2 ? irq2 : -EINVAL; + qmgr_irq_2 = irq2; /* reset qmgr registers */ for (i = 0; i < 4; i++) { @@ -316,50 +420,62 @@ static int qmgr_init(void) } else handler1 = handler2 = qmgr_irq; - err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager", - NULL); + err = devm_request_irq(dev, irq1, handler1, 0, "IXP4xx Queue Manager", + NULL); if (err) { - printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", - IRQ_IXP4XX_QM1, err); - goto error_irq; + dev_err(dev, "failed to request IRQ%i (%i)\n", + irq1, err); + return err; } - err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager", - NULL); + err = devm_request_irq(dev, irq2, handler2, 0, "IXP4xx Queue Manager", + NULL); if (err) { - printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n", - IRQ_IXP4XX_QM2, err); - goto error_irq2; + dev_err(dev, "failed to request IRQ%i (%i)\n", + irq2, err); + return err; } used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */ spin_lock_init(&qmgr_lock); - printk(KERN_INFO "IXP4xx Queue Manager initialized.\n"); + dev_info(dev, "IXP4xx Queue Manager initialized.\n"); return 0; - -error_irq2: - free_irq(IRQ_IXP4XX_QM1, NULL); -error_irq: - release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); - return err; } -static void qmgr_remove(void) +static int ixp4xx_qmgr_remove(struct platform_device *pdev) { - free_irq(IRQ_IXP4XX_QM1, NULL); - free_irq(IRQ_IXP4XX_QM2, NULL); - synchronize_irq(IRQ_IXP4XX_QM1); - synchronize_irq(IRQ_IXP4XX_QM2); - release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); + synchronize_irq(qmgr_irq_1); + synchronize_irq(qmgr_irq_2); + return 0; } -module_init(qmgr_init); -module_exit(qmgr_remove); +static const struct of_device_id ixp4xx_qmgr_of_match[] = { + { + .compatible = "intel,ixp4xx-ahb-queue-manager", + }, + {}, +}; + +static struct platform_driver ixp4xx_qmgr_driver = { + .driver = { + .name = "ixp4xx-qmgr", + .of_match_table = of_match_ptr(ixp4xx_qmgr_of_match), + }, + .probe = ixp4xx_qmgr_probe, + .remove = ixp4xx_qmgr_remove, +}; +module_platform_driver(ixp4xx_qmgr_driver); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Krzysztof Halasa"); +EXPORT_SYMBOL(qmgr_put_entry); +EXPORT_SYMBOL(qmgr_get_entry); +EXPORT_SYMBOL(qmgr_stat_empty); +EXPORT_SYMBOL(qmgr_stat_below_low_watermark); +EXPORT_SYMBOL(qmgr_stat_full); +EXPORT_SYMBOL(qmgr_stat_overflow); EXPORT_SYMBOL(qmgr_set_irq); EXPORT_SYMBOL(qmgr_enable_irq); EXPORT_SYMBOL(qmgr_disable_irq); diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c index 8236a6c87e19..c4449a163991 100644 --- a/drivers/soc/mediatek/mtk-pmic-wrap.c +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c @@ -381,6 +381,10 @@ enum pwrap_regs { PWRAP_EXT_GPS_AUXADC_RDATA_ADDR, PWRAP_GPSINF_0_STA, PWRAP_GPSINF_1_STA, + + /* MT8516 only regs */ + PWRAP_OP_TYPE, + PWRAP_MSB_FIRST, }; static int mt2701_regs[] = { @@ -852,6 +856,91 @@ static int mt8183_regs[] = { [PWRAP_WACS2_VLDCLR] = 0xC28, }; +static int mt8516_regs[] = { + [PWRAP_MUX_SEL] = 0x0, + [PWRAP_WRAP_EN] = 0x4, + [PWRAP_DIO_EN] = 0x8, + [PWRAP_SIDLY] = 0xc, + [PWRAP_RDDMY] = 0x10, + [PWRAP_SI_CK_CON] = 0x14, + [PWRAP_CSHEXT_WRITE] = 0x18, + [PWRAP_CSHEXT_READ] = 0x1c, + [PWRAP_CSLEXT_START] = 0x20, + [PWRAP_CSLEXT_END] = 0x24, + [PWRAP_STAUPD_PRD] = 0x28, + [PWRAP_STAUPD_GRPEN] = 0x2c, + [PWRAP_STAUPD_MAN_TRIG] = 0x40, + [PWRAP_STAUPD_STA] = 0x44, + [PWRAP_WRAP_STA] = 0x48, + [PWRAP_HARB_INIT] = 0x4c, + [PWRAP_HARB_HPRIO] = 0x50, + [PWRAP_HIPRIO_ARB_EN] = 0x54, + [PWRAP_HARB_STA0] = 0x58, + [PWRAP_HARB_STA1] = 0x5c, + [PWRAP_MAN_EN] = 0x60, + [PWRAP_MAN_CMD] = 0x64, + [PWRAP_MAN_RDATA] = 0x68, + [PWRAP_MAN_VLDCLR] = 0x6c, + [PWRAP_WACS0_EN] = 0x70, + [PWRAP_INIT_DONE0] = 0x74, + [PWRAP_WACS0_CMD] = 0x78, + [PWRAP_WACS0_RDATA] = 0x7c, + [PWRAP_WACS0_VLDCLR] = 0x80, + [PWRAP_WACS1_EN] = 0x84, + [PWRAP_INIT_DONE1] = 0x88, + [PWRAP_WACS1_CMD] = 0x8c, + [PWRAP_WACS1_RDATA] = 0x90, + [PWRAP_WACS1_VLDCLR] = 0x94, + [PWRAP_WACS2_EN] = 0x98, + [PWRAP_INIT_DONE2] = 0x9c, + [PWRAP_WACS2_CMD] = 0xa0, + [PWRAP_WACS2_RDATA] = 0xa4, + [PWRAP_WACS2_VLDCLR] = 0xa8, + [PWRAP_INT_EN] = 0xac, + [PWRAP_INT_FLG_RAW] = 0xb0, + [PWRAP_INT_FLG] = 0xb4, + [PWRAP_INT_CLR] = 0xb8, + [PWRAP_SIG_ADR] = 0xbc, + [PWRAP_SIG_MODE] = 0xc0, + [PWRAP_SIG_VALUE] = 0xc4, + [PWRAP_SIG_ERRVAL] = 0xc8, + [PWRAP_CRC_EN] = 0xcc, + [PWRAP_TIMER_EN] = 0xd0, + [PWRAP_TIMER_STA] = 0xd4, + [PWRAP_WDT_UNIT] = 0xd8, + [PWRAP_WDT_SRC_EN] = 0xdc, + [PWRAP_WDT_FLG] = 0xe0, + [PWRAP_DEBUG_INT_SEL] = 0xe4, + [PWRAP_DVFS_ADR0] = 0xe8, + [PWRAP_DVFS_WDATA0] = 0xec, + [PWRAP_DVFS_ADR1] = 0xf0, + [PWRAP_DVFS_WDATA1] = 0xf4, + [PWRAP_DVFS_ADR2] = 0xf8, + [PWRAP_DVFS_WDATA2] = 0xfc, + [PWRAP_DVFS_ADR3] = 0x100, + [PWRAP_DVFS_WDATA3] = 0x104, + [PWRAP_DVFS_ADR4] = 0x108, + [PWRAP_DVFS_WDATA4] = 0x10c, + [PWRAP_DVFS_ADR5] = 0x110, + [PWRAP_DVFS_WDATA5] = 0x114, + [PWRAP_DVFS_ADR6] = 0x118, + [PWRAP_DVFS_WDATA6] = 0x11c, + [PWRAP_DVFS_ADR7] = 0x120, + [PWRAP_DVFS_WDATA7] = 0x124, + [PWRAP_SPMINF_STA] = 0x128, + [PWRAP_CIPHER_KEY_SEL] = 0x12c, + [PWRAP_CIPHER_IV_SEL] = 0x130, + [PWRAP_CIPHER_EN] = 0x134, + [PWRAP_CIPHER_RDY] = 0x138, + [PWRAP_CIPHER_MODE] = 0x13c, + [PWRAP_CIPHER_SWRST] = 0x140, + [PWRAP_DCM_EN] = 0x144, + [PWRAP_DCM_DBC_PRD] = 0x148, + [PWRAP_SW_RST] = 0x168, + [PWRAP_OP_TYPE] = 0x16c, + [PWRAP_MSB_FIRST] = 0x170, +}; + enum pmic_type { PMIC_MT6323, PMIC_MT6351, @@ -869,6 +958,7 @@ enum pwrap_type { PWRAP_MT8135, PWRAP_MT8173, PWRAP_MT8183, + PWRAP_MT8516, }; struct pmic_wrapper; @@ -1281,7 +1371,7 @@ static bool pwrap_is_pmic_cipher_ready(struct pmic_wrapper *wrp) static int pwrap_init_cipher(struct pmic_wrapper *wrp) { int ret; - u32 rdata; + u32 rdata = 0; pwrap_writel(wrp, 0x1, PWRAP_CIPHER_SWRST); pwrap_writel(wrp, 0x0, PWRAP_CIPHER_SWRST); @@ -1297,6 +1387,7 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp) case PWRAP_MT6765: case PWRAP_MT6797: case PWRAP_MT8173: + case PWRAP_MT8516: pwrap_writel(wrp, 1, PWRAP_CIPHER_EN); break; case PWRAP_MT7622: @@ -1478,7 +1569,8 @@ static int pwrap_init(struct pmic_wrapper *wrp) { int ret; - reset_control_reset(wrp->rstc); + if (wrp->rstc) + reset_control_reset(wrp->rstc); if (wrp->rstc_bridge) reset_control_reset(wrp->rstc_bridge); @@ -1764,6 +1856,18 @@ static const struct pmic_wrapper_type pwrap_mt8183 = { .init_soc_specific = pwrap_mt8183_init_soc_specific, }; +static struct pmic_wrapper_type pwrap_mt8516 = { + .regs = mt8516_regs, + .type = PWRAP_MT8516, + .arb_en_all = 0xff, + .int_en_all = ~(u32)(BIT(31) | BIT(2)), + .spi_w = PWRAP_MAN_CMD_SPI_WRITE, + .wdt_src = PWRAP_WDT_SRC_MASK_ALL, + .caps = PWRAP_CAP_DCM, + .init_reg_clock = pwrap_mt2701_init_reg_clock, + .init_soc_specific = NULL, +}; + static const struct of_device_id of_pwrap_match_tbl[] = { { .compatible = "mediatek,mt2701-pwrap", @@ -1787,6 +1891,9 @@ static const struct of_device_id of_pwrap_match_tbl[] = { .compatible = "mediatek,mt8183-pwrap", .data = &pwrap_mt8183, }, { + .compatible = "mediatek,mt8516-pwrap", + .data = &pwrap_mt8516, + }, { /* sentinel */ } }; diff --git a/drivers/soc/qcom/cmd-db.c b/drivers/soc/qcom/cmd-db.c index c701b3b010f1..f6c3d17b05c7 100644 --- a/drivers/soc/qcom/cmd-db.c +++ b/drivers/soc/qcom/cmd-db.c @@ -248,8 +248,8 @@ static int cmd_db_dev_probe(struct platform_device *pdev) } cmd_db_header = memremap(rmem->base, rmem->size, MEMREMAP_WB); - if (IS_ERR_OR_NULL(cmd_db_header)) { - ret = PTR_ERR(cmd_db_header); + if (!cmd_db_header) { + ret = -ENOMEM; cmd_db_header = NULL; return ret; } diff --git a/drivers/soc/qcom/qmi_interface.c b/drivers/soc/qcom/qmi_interface.c index c239a28e503f..f9e309f0acd3 100644 --- a/drivers/soc/qcom/qmi_interface.c +++ b/drivers/soc/qcom/qmi_interface.c @@ -345,8 +345,7 @@ int qmi_txn_wait(struct qmi_txn *txn, unsigned long timeout) struct qmi_handle *qmi = txn->qmi; int ret; - ret = wait_for_completion_interruptible_timeout(&txn->completion, - timeout); + ret = wait_for_completion_timeout(&txn->completion, timeout); mutex_lock(&qmi->txn_lock); mutex_lock(&txn->lock); @@ -354,9 +353,7 @@ int qmi_txn_wait(struct qmi_txn *txn, unsigned long timeout) mutex_unlock(&txn->lock); mutex_unlock(&qmi->txn_lock); - if (ret < 0) - return ret; - else if (ret == 0) + if (ret == 0) return -ETIMEDOUT; else return txn->result; diff --git a/drivers/soc/qcom/rmtfs_mem.c b/drivers/soc/qcom/rmtfs_mem.c index 7200d762a951..6f5e8be9689c 100644 --- a/drivers/soc/qcom/rmtfs_mem.c +++ b/drivers/soc/qcom/rmtfs_mem.c @@ -137,6 +137,26 @@ static struct class rmtfs_class = { .name = "rmtfs", }; +static int qcom_rmtfs_mem_mmap(struct file *filep, struct vm_area_struct *vma) +{ + struct qcom_rmtfs_mem *rmtfs_mem = filep->private_data; + + if (vma->vm_end - vma->vm_start > rmtfs_mem->size) { + dev_dbg(&rmtfs_mem->dev, + "vm_end[%lu] - vm_start[%lu] [%lu] > mem->size[%pa]\n", + vma->vm_end, vma->vm_start, + (vma->vm_end - vma->vm_start), &rmtfs_mem->size); + return -EINVAL; + } + + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); + return remap_pfn_range(vma, + vma->vm_start, + rmtfs_mem->addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + static const struct file_operations qcom_rmtfs_mem_fops = { .owner = THIS_MODULE, .open = qcom_rmtfs_mem_open, @@ -144,6 +164,7 @@ static const struct file_operations qcom_rmtfs_mem_fops = { .write = qcom_rmtfs_mem_write, .release = qcom_rmtfs_mem_release, .llseek = default_llseek, + .mmap = qcom_rmtfs_mem_mmap, }; static void qcom_rmtfs_mem_release_device(struct device *dev) diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c index 75bd9a83aef0..e278fc11fe5c 100644 --- a/drivers/soc/qcom/rpmh-rsc.c +++ b/drivers/soc/qcom/rpmh-rsc.c @@ -459,7 +459,7 @@ static int find_slots(struct tcs_group *tcs, const struct tcs_request *msg, do { slot = bitmap_find_next_zero_area(tcs->slots, MAX_TCS_SLOTS, i, msg->num_cmds, 0); - if (slot == tcs->num_tcs * tcs->ncpt) + if (slot >= tcs->num_tcs * tcs->ncpt) return -ENOMEM; i += tcs->ncpt; } while (slot + msg->num_cmds - 1 >= i); diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c index 4af96e668a2f..3299cf5365f3 100644 --- a/drivers/soc/renesas/renesas-soc.c +++ b/drivers/soc/renesas/renesas-soc.c @@ -335,6 +335,9 @@ static int __init renesas_soc_init(void) /* R-Car M3-W ES1.1 incorrectly identifies as ES2.0 */ if ((product & 0x7fff) == 0x5210) product ^= 0x11; + /* R-Car M3-W ES1.3 incorrectly identifies as ES2.1 */ + if ((product & 0x7fff) == 0x5211) + product ^= 0x12; if (soc->id && ((product >> 8) & 0xff) != soc->id) { pr_warn("SoC mismatch (product = 0x%x)\n", product); return -ENODEV; diff --git a/drivers/soc/rockchip/grf.c b/drivers/soc/rockchip/grf.c index 96882ffde67e..3b81e1d75a97 100644 --- a/drivers/soc/rockchip/grf.c +++ b/drivers/soc/rockchip/grf.c @@ -66,9 +66,11 @@ static const struct rockchip_grf_info rk3228_grf __initconst = { }; #define RK3288_GRF_SOC_CON0 0x244 +#define RK3288_GRF_SOC_CON2 0x24c static const struct rockchip_grf_value rk3288_defaults[] __initconst = { { "jtag switching", RK3288_GRF_SOC_CON0, HIWORD_UPDATE(0, 1, 12) }, + { "pwm select", RK3288_GRF_SOC_CON2, HIWORD_UPDATE(1, 1, 0) }, }; static const struct rockchip_grf_info rk3288_grf __initconst = { diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index 0df258518693..5648e5c09ef5 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -272,6 +272,14 @@ static const char * const tegra30_reset_sources[] = { "WATCHDOG", "SENSOR", "SW_MAIN", + "LP0" +}; + +static const char * const tegra210_reset_sources[] = { + "POWER_ON_RESET", + "WATCHDOG", + "SENSOR", + "SW_MAIN", "LP0", "AOTAG" }; @@ -656,10 +664,15 @@ static int tegra_genpd_power_on(struct generic_pm_domain *domain) int err; err = tegra_powergate_power_up(pg, true); - if (err) + if (err) { dev_err(dev, "failed to turn on PM domain %s: %d\n", pg->genpd.name, err); + goto out; + } + + reset_control_release(pg->reset); +out: return err; } @@ -669,10 +682,18 @@ static int tegra_genpd_power_off(struct generic_pm_domain *domain) struct device *dev = pg->pmc->dev; int err; + err = reset_control_acquire(pg->reset); + if (err < 0) { + pr_err("failed to acquire resets: %d\n", err); + return err; + } + err = tegra_powergate_power_down(pg); - if (err) + if (err) { dev_err(dev, "failed to turn off PM domain %s: %d\n", pg->genpd.name, err); + reset_control_release(pg->reset); + } return err; } @@ -937,38 +958,53 @@ static int tegra_powergate_of_get_resets(struct tegra_powergate *pg, struct device *dev = pg->pmc->dev; int err; - pg->reset = of_reset_control_array_get_exclusive(np); + pg->reset = of_reset_control_array_get_exclusive_released(np); if (IS_ERR(pg->reset)) { err = PTR_ERR(pg->reset); dev_err(dev, "failed to get device resets: %d\n", err); return err; } - if (off) + err = reset_control_acquire(pg->reset); + if (err < 0) { + pr_err("failed to acquire resets: %d\n", err); + goto out; + } + + if (off) { err = reset_control_assert(pg->reset); - else + } else { err = reset_control_deassert(pg->reset); + if (err < 0) + goto out; - if (err) + reset_control_release(pg->reset); + } + +out: + if (err) { + reset_control_release(pg->reset); reset_control_put(pg->reset); + } return err; } -static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np) +static int tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np) { struct device *dev = pmc->dev; struct tegra_powergate *pg; - int id, err; + int id, err = 0; bool off; pg = kzalloc(sizeof(*pg), GFP_KERNEL); if (!pg) - return; + return -ENOMEM; id = tegra_powergate_lookup(pmc, np->name); if (id < 0) { dev_err(dev, "powergate lookup failed for %pOFn: %d\n", np, id); + err = -ENODEV; goto free_mem; } @@ -1021,7 +1057,7 @@ static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np) dev_dbg(dev, "added PM domain %s\n", pg->genpd.name); - return; + return 0; remove_genpd: pm_genpd_remove(&pg->genpd); @@ -1040,25 +1076,67 @@ set_available: free_mem: kfree(pg); + + return err; } -static void tegra_powergate_init(struct tegra_pmc *pmc, - struct device_node *parent) +static int tegra_powergate_init(struct tegra_pmc *pmc, + struct device_node *parent) { struct device_node *np, *child; - unsigned int i; + int err = 0; + + np = of_get_child_by_name(parent, "powergates"); + if (!np) + return 0; + + for_each_child_of_node(np, child) { + err = tegra_powergate_add(pmc, child); + if (err < 0) { + of_node_put(child); + break; + } + } + + of_node_put(np); + + return err; +} + +static void tegra_powergate_remove(struct generic_pm_domain *genpd) +{ + struct tegra_powergate *pg = to_powergate(genpd); + + reset_control_put(pg->reset); + + while (pg->num_clks--) + clk_put(pg->clks[pg->num_clks]); + + kfree(pg->clks); - /* Create a bitmap of the available and valid partitions */ - for (i = 0; i < pmc->soc->num_powergates; i++) - if (pmc->soc->powergates[i]) - set_bit(i, pmc->powergates_available); + set_bit(pg->id, pmc->powergates_available); + + kfree(pg); +} + +static void tegra_powergate_remove_all(struct device_node *parent) +{ + struct generic_pm_domain *genpd; + struct device_node *np, *child; np = of_get_child_by_name(parent, "powergates"); if (!np) return; - for_each_child_of_node(np, child) - tegra_powergate_add(pmc, child); + for_each_child_of_node(np, child) { + of_genpd_del_provider(child); + + genpd = of_genpd_remove_last(child); + if (IS_ERR(genpd)) + continue; + + tegra_powergate_remove(genpd); + } of_node_put(np); } @@ -1709,13 +1787,16 @@ static int tegra_pmc_pinctrl_init(struct tegra_pmc *pmc) static ssize_t reset_reason_show(struct device *dev, struct device_attribute *attr, char *buf) { - u32 value, rst_src; + u32 value; value = tegra_pmc_readl(pmc, pmc->soc->regs->rst_status); - rst_src = (value & pmc->soc->regs->rst_source_mask) >> - pmc->soc->regs->rst_source_shift; + value &= pmc->soc->regs->rst_source_mask; + value >>= pmc->soc->regs->rst_source_shift; + + if (WARN_ON(value >= pmc->soc->num_reset_sources)) + return sprintf(buf, "%s\n", "UNKNOWN"); - return sprintf(buf, "%s\n", pmc->soc->reset_sources[rst_src]); + return sprintf(buf, "%s\n", pmc->soc->reset_sources[value]); } static DEVICE_ATTR_RO(reset_reason); @@ -1723,13 +1804,16 @@ static DEVICE_ATTR_RO(reset_reason); static ssize_t reset_level_show(struct device *dev, struct device_attribute *attr, char *buf) { - u32 value, rst_lvl; + u32 value; value = tegra_pmc_readl(pmc, pmc->soc->regs->rst_status); - rst_lvl = (value & pmc->soc->regs->rst_level_mask) >> - pmc->soc->regs->rst_level_shift; + value &= pmc->soc->regs->rst_level_mask; + value >>= pmc->soc->regs->rst_level_shift; - return sprintf(buf, "%s\n", pmc->soc->reset_levels[rst_lvl]); + if (WARN_ON(value >= pmc->soc->num_reset_levels)) + return sprintf(buf, "%s\n", "UNKNOWN"); + + return sprintf(buf, "%s\n", pmc->soc->reset_levels[value]); } static DEVICE_ATTR_RO(reset_level); @@ -1999,7 +2083,7 @@ static int tegra_pmc_probe(struct platform_device *pdev) if (IS_ENABLED(CONFIG_DEBUG_FS)) { err = tegra_powergate_debugfs_init(); if (err < 0) - return err; + goto cleanup_sysfs; } err = register_restart_handler(&tegra_pmc_restart_handler); @@ -2013,9 +2097,13 @@ static int tegra_pmc_probe(struct platform_device *pdev) if (err) goto cleanup_restart_handler; + err = tegra_powergate_init(pmc, pdev->dev.of_node); + if (err < 0) + goto cleanup_powergates; + err = tegra_pmc_irq_init(pmc); if (err < 0) - goto cleanup_restart_handler; + goto cleanup_powergates; mutex_lock(&pmc->powergates_lock); iounmap(pmc->base); @@ -2026,10 +2114,15 @@ static int tegra_pmc_probe(struct platform_device *pdev) return 0; +cleanup_powergates: + tegra_powergate_remove_all(pdev->dev.of_node); cleanup_restart_handler: unregister_restart_handler(&tegra_pmc_restart_handler); cleanup_debugfs: debugfs_remove(pmc->debugfs); +cleanup_sysfs: + device_remove_file(&pdev->dev, &dev_attr_reset_reason); + device_remove_file(&pdev->dev, &dev_attr_reset_level); return err; } @@ -2185,7 +2278,7 @@ static const struct tegra_pmc_soc tegra30_pmc_soc = { .init = tegra20_pmc_init, .setup_irq_polarity = tegra20_pmc_setup_irq_polarity, .reset_sources = tegra30_reset_sources, - .num_reset_sources = 5, + .num_reset_sources = ARRAY_SIZE(tegra30_reset_sources), .reset_levels = NULL, .num_reset_levels = 0, }; @@ -2236,7 +2329,7 @@ static const struct tegra_pmc_soc tegra114_pmc_soc = { .init = tegra20_pmc_init, .setup_irq_polarity = tegra20_pmc_setup_irq_polarity, .reset_sources = tegra30_reset_sources, - .num_reset_sources = 5, + .num_reset_sources = ARRAY_SIZE(tegra30_reset_sources), .reset_levels = NULL, .num_reset_levels = 0, }; @@ -2347,7 +2440,7 @@ static const struct tegra_pmc_soc tegra124_pmc_soc = { .init = tegra20_pmc_init, .setup_irq_polarity = tegra20_pmc_setup_irq_polarity, .reset_sources = tegra30_reset_sources, - .num_reset_sources = 5, + .num_reset_sources = ARRAY_SIZE(tegra30_reset_sources), .reset_levels = NULL, .num_reset_levels = 0, }; @@ -2452,8 +2545,8 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = { .regs = &tegra20_pmc_regs, .init = tegra20_pmc_init, .setup_irq_polarity = tegra20_pmc_setup_irq_polarity, - .reset_sources = tegra30_reset_sources, - .num_reset_sources = 5, + .reset_sources = tegra210_reset_sources, + .num_reset_sources = ARRAY_SIZE(tegra210_reset_sources), .reset_levels = NULL, .num_reset_levels = 0, }; @@ -2578,9 +2671,9 @@ static const struct tegra_pmc_soc tegra186_pmc_soc = { .init = NULL, .setup_irq_polarity = tegra186_pmc_setup_irq_polarity, .reset_sources = tegra186_reset_sources, - .num_reset_sources = 14, + .num_reset_sources = ARRAY_SIZE(tegra186_reset_sources), .reset_levels = tegra186_reset_levels, - .num_reset_levels = 3, + .num_reset_levels = ARRAY_SIZE(tegra186_reset_levels), .num_wake_events = ARRAY_SIZE(tegra186_wake_events), .wake_events = tegra186_wake_events, }; @@ -2719,6 +2812,7 @@ static int __init tegra_pmc_early_init(void) const struct of_device_id *match; struct device_node *np; struct resource regs; + unsigned int i; bool invert; mutex_init(&pmc->powergates_lock); @@ -2775,7 +2869,10 @@ static int __init tegra_pmc_early_init(void) if (pmc->soc->maybe_tz_only) pmc->tz_only = tegra_pmc_detect_tz_only(pmc); - tegra_powergate_init(pmc, np); + /* Create a bitmap of the available and valid partitions */ + for (i = 0; i < pmc->soc->num_powergates; i++) + if (pmc->soc->powergates[i]) + set_bit(i, pmc->powergates_available); /* * Invert the interrupt polarity if a PMC device tree node diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig index be4570baad96..57960e92ebe0 100644 --- a/drivers/soc/ti/Kconfig +++ b/drivers/soc/ti/Kconfig @@ -45,11 +45,12 @@ config KEYSTONE_NAVIGATOR_DMA config AMX3_PM tristate "AMx3 Power Management" depends on SOC_AM33XX || SOC_AM43XX - depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM + depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM && RTC_DRV_OMAP help Enable power management on AM335x and AM437x. Required for suspend to mem and standby states on both AM335x and AM437x platforms and for deeper cpuidle - c-states on AM335x. + c-states on AM335x. Also required for rtc and ddr in self-refresh low + power mode on AM437x platforms. config WKUP_M3_IPC tristate "TI AMx3 Wkup-M3 IPC Driver" diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c index d0dab323651f..fc5802ccb1c0 100644 --- a/drivers/soc/ti/pm33xx.c +++ b/drivers/soc/ti/pm33xx.c @@ -6,6 +6,7 @@ * Vaibhav Bedia, Dave Gerlach */ +#include <linux/clk.h> #include <linux/cpu.h> #include <linux/err.h> #include <linux/genalloc.h> @@ -13,9 +14,12 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/nvmem-consumer.h> #include <linux/of.h> #include <linux/platform_data/pm33xx.h> #include <linux/platform_device.h> +#include <linux/rtc.h> +#include <linux/rtc/rtc-omap.h> #include <linux/sizes.h> #include <linux/sram.h> #include <linux/suspend.h> @@ -29,33 +33,162 @@ #define AMX3_PM_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \ (unsigned long)pm_sram->do_wfi) +#define RTC_SCRATCH_RESUME_REG 0 +#define RTC_SCRATCH_MAGIC_REG 1 +#define RTC_REG_BOOT_MAGIC 0x8cd0 /* RTC */ +#define GIC_INT_SET_PENDING_BASE 0x200 +#define AM43XX_GIC_DIST_BASE 0x48241000 + +static u32 rtc_magic_val; + static int (*am33xx_do_wfi_sram)(unsigned long unused); static phys_addr_t am33xx_do_wfi_sram_phys; static struct gen_pool *sram_pool, *sram_pool_data; static unsigned long ocmcram_location, ocmcram_location_data; +static struct rtc_device *omap_rtc; +static void __iomem *gic_dist_base; + static struct am33xx_pm_platform_data *pm_ops; static struct am33xx_pm_sram_addr *pm_sram; static struct device *pm33xx_dev; static struct wkup_m3_ipc *m3_ipc; +#ifdef CONFIG_SUSPEND +static int rtc_only_idle; +static int retrigger_irq; static unsigned long suspend_wfi_flags; +static struct wkup_m3_wakeup_src wakeup_src = {.irq_nr = 0, + .src = "Unknown", +}; + +static struct wkup_m3_wakeup_src rtc_alarm_wakeup = { + .irq_nr = 108, .src = "RTC Alarm", +}; + +static struct wkup_m3_wakeup_src rtc_ext_wakeup = { + .irq_nr = 0, .src = "Ext wakeup", +}; +#endif + static u32 sram_suspend_address(unsigned long addr) { return ((unsigned long)am33xx_do_wfi_sram + AMX3_PM_SRAM_SYMBOL_OFFSET(addr)); } +static int am33xx_push_sram_idle(void) +{ + struct am33xx_pm_ro_sram_data ro_sram_data; + int ret; + u32 table_addr, ro_data_addr; + void *copy_addr; + + ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data; + ro_sram_data.amx3_pm_sram_data_phys = + gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data); + ro_sram_data.rtc_base_virt = pm_ops->get_rtc_base_addr(); + + /* Save physical address to calculate resume offset during pm init */ + am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool, + ocmcram_location); + + am33xx_do_wfi_sram = sram_exec_copy(sram_pool, (void *)ocmcram_location, + pm_sram->do_wfi, + *pm_sram->do_wfi_sz); + if (!am33xx_do_wfi_sram) { + dev_err(pm33xx_dev, + "PM: %s: am33xx_do_wfi copy to sram failed\n", + __func__); + return -ENODEV; + } + + table_addr = + sram_suspend_address((unsigned long)pm_sram->emif_sram_table); + ret = ti_emif_copy_pm_function_table(sram_pool, (void *)table_addr); + if (ret) { + dev_dbg(pm33xx_dev, + "PM: %s: EMIF function copy failed\n", __func__); + return -EPROBE_DEFER; + } + + ro_data_addr = + sram_suspend_address((unsigned long)pm_sram->ro_sram_data); + copy_addr = sram_exec_copy(sram_pool, (void *)ro_data_addr, + &ro_sram_data, + sizeof(ro_sram_data)); + if (!copy_addr) { + dev_err(pm33xx_dev, + "PM: %s: ro_sram_data copy to sram failed\n", + __func__); + return -ENODEV; + } + + return 0; +} + +static int __init am43xx_map_gic(void) +{ + gic_dist_base = ioremap(AM43XX_GIC_DIST_BASE, SZ_4K); + + if (!gic_dist_base) + return -ENOMEM; + + return 0; +} + #ifdef CONFIG_SUSPEND +struct wkup_m3_wakeup_src rtc_wake_src(void) +{ + u32 i; + + i = __raw_readl(pm_ops->get_rtc_base_addr() + 0x44) & 0x40; + + if (i) { + retrigger_irq = rtc_alarm_wakeup.irq_nr; + return rtc_alarm_wakeup; + } + + retrigger_irq = rtc_ext_wakeup.irq_nr; + + return rtc_ext_wakeup; +} + +int am33xx_rtc_only_idle(unsigned long wfi_flags) +{ + omap_rtc_power_off_program(&omap_rtc->dev); + am33xx_do_wfi_sram(wfi_flags); + return 0; +} + static int am33xx_pm_suspend(suspend_state_t suspend_state) { int i, ret = 0; - ret = pm_ops->soc_suspend((unsigned long)suspend_state, - am33xx_do_wfi_sram, suspend_wfi_flags); + if (suspend_state == PM_SUSPEND_MEM && + pm_ops->check_off_mode_enable()) { + pm_ops->prepare_rtc_suspend(); + pm_ops->save_context(); + suspend_wfi_flags |= WFI_FLAG_RTC_ONLY; + clk_save_context(); + ret = pm_ops->soc_suspend(suspend_state, am33xx_rtc_only_idle, + suspend_wfi_flags); + + suspend_wfi_flags &= ~WFI_FLAG_RTC_ONLY; + + if (!ret) { + clk_restore_context(); + pm_ops->restore_context(); + m3_ipc->ops->set_rtc_only(m3_ipc); + am33xx_push_sram_idle(); + } + } else { + ret = pm_ops->soc_suspend(suspend_state, am33xx_do_wfi_sram, + suspend_wfi_flags); + } if (ret) { dev_err(pm33xx_dev, "PM: Kernel suspend failure\n"); @@ -77,8 +210,20 @@ static int am33xx_pm_suspend(suspend_state_t suspend_state) "PM: CM3 returned unknown result = %d\n", i); ret = -1; } + + /* print the wakeup reason */ + if (rtc_only_idle) { + wakeup_src = rtc_wake_src(); + pr_info("PM: Wakeup source %s\n", wakeup_src.src); + } else { + pr_info("PM: Wakeup source %s\n", + m3_ipc->ops->request_wake_src(m3_ipc)); + } } + if (suspend_state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable()) + pm_ops->prepare_rtc_resume(); + return ret; } @@ -101,6 +246,18 @@ static int am33xx_pm_enter(suspend_state_t suspend_state) static int am33xx_pm_begin(suspend_state_t state) { int ret = -EINVAL; + struct nvmem_device *nvmem; + + if (state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable()) { + nvmem = devm_nvmem_device_get(&omap_rtc->dev, + "omap_rtc_scratch0"); + if (nvmem) + nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4, + (void *)&rtc_magic_val); + rtc_only_idle = 1; + } else { + rtc_only_idle = 0; + } switch (state) { case PM_SUSPEND_MEM: @@ -116,7 +273,28 @@ static int am33xx_pm_begin(suspend_state_t state) static void am33xx_pm_end(void) { + u32 val = 0; + struct nvmem_device *nvmem; + + nvmem = devm_nvmem_device_get(&omap_rtc->dev, "omap_rtc_scratch0"); m3_ipc->ops->finish_low_power(m3_ipc); + if (rtc_only_idle) { + if (retrigger_irq) + /* + * 32 bits of Interrupt Set-Pending correspond to 32 + * 32 interrupts. Compute the bit offset of the + * Interrupt and set that particular bit + * Compute the register offset by dividing interrupt + * number by 32 and mutiplying by 4 + */ + writel_relaxed(1 << (retrigger_irq & 31), + gic_dist_base + GIC_INT_SET_PENDING_BASE + + retrigger_irq / 32 * 4); + nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4, + (void *)&val); + } + + rtc_only_idle = 0; } static int am33xx_pm_valid(suspend_state_t state) @@ -219,51 +397,37 @@ mpu_put_node: return ret; } -static int am33xx_push_sram_idle(void) +static int am33xx_pm_rtc_setup(void) { - struct am33xx_pm_ro_sram_data ro_sram_data; - int ret; - u32 table_addr, ro_data_addr; - void *copy_addr; - - ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data; - ro_sram_data.amx3_pm_sram_data_phys = - gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data); - ro_sram_data.rtc_base_virt = pm_ops->get_rtc_base_addr(); + struct device_node *np; + unsigned long val = 0; + struct nvmem_device *nvmem; - /* Save physical address to calculate resume offset during pm init */ - am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool, - ocmcram_location); + np = of_find_node_by_name(NULL, "rtc"); - am33xx_do_wfi_sram = sram_exec_copy(sram_pool, (void *)ocmcram_location, - pm_sram->do_wfi, - *pm_sram->do_wfi_sz); - if (!am33xx_do_wfi_sram) { - dev_err(pm33xx_dev, - "PM: %s: am33xx_do_wfi copy to sram failed\n", - __func__); - return -ENODEV; - } - - table_addr = - sram_suspend_address((unsigned long)pm_sram->emif_sram_table); - ret = ti_emif_copy_pm_function_table(sram_pool, (void *)table_addr); - if (ret) { - dev_dbg(pm33xx_dev, - "PM: %s: EMIF function copy failed\n", __func__); - return -EPROBE_DEFER; - } + if (of_device_is_available(np)) { + omap_rtc = rtc_class_open("rtc0"); + if (!omap_rtc) { + pr_warn("PM: rtc0 not available"); + return -EPROBE_DEFER; + } - ro_data_addr = - sram_suspend_address((unsigned long)pm_sram->ro_sram_data); - copy_addr = sram_exec_copy(sram_pool, (void *)ro_data_addr, - &ro_sram_data, - sizeof(ro_sram_data)); - if (!copy_addr) { - dev_err(pm33xx_dev, - "PM: %s: ro_sram_data copy to sram failed\n", - __func__); - return -ENODEV; + nvmem = devm_nvmem_device_get(&omap_rtc->dev, + "omap_rtc_scratch0"); + if (nvmem) { + nvmem_device_read(nvmem, RTC_SCRATCH_MAGIC_REG * 4, + 4, (void *)&rtc_magic_val); + if ((rtc_magic_val & 0xffff) != RTC_REG_BOOT_MAGIC) + pr_warn("PM: bootloader does not support rtc-only!\n"); + + nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, + 4, (void *)&val); + val = pm_sram->resume_address; + nvmem_device_write(nvmem, RTC_SCRATCH_RESUME_REG * 4, + 4, (void *)&val); + } + } else { + pr_warn("PM: no-rtc available, rtc-only mode disabled.\n"); } return 0; @@ -284,34 +448,42 @@ static int am33xx_pm_probe(struct platform_device *pdev) return -ENODEV; } + ret = am43xx_map_gic(); + if (ret) { + pr_err("PM: Could not ioremap GIC base\n"); + return ret; + } + pm_sram = pm_ops->get_sram_addrs(); if (!pm_sram) { dev_err(dev, "PM: Cannot get PM asm function addresses!!\n"); return -ENODEV; } + m3_ipc = wkup_m3_ipc_get(); + if (!m3_ipc) { + pr_err("PM: Cannot get wkup_m3_ipc handle\n"); + return -EPROBE_DEFER; + } + pm33xx_dev = dev; ret = am33xx_pm_alloc_sram(); if (ret) return ret; - ret = am33xx_push_sram_idle(); + ret = am33xx_pm_rtc_setup(); if (ret) goto err_free_sram; - m3_ipc = wkup_m3_ipc_get(); - if (!m3_ipc) { - dev_dbg(dev, "PM: Cannot get wkup_m3_ipc handle\n"); - ret = -EPROBE_DEFER; + ret = am33xx_push_sram_idle(); + if (ret) goto err_free_sram; - } am33xx_pm_set_ipc_ops(); #ifdef CONFIG_SUSPEND suspend_set_ops(&am33xx_pm_ops); -#endif /* CONFIG_SUSPEND */ /* * For a system suspend we must flush the caches, we want @@ -323,6 +495,7 @@ static int am33xx_pm_probe(struct platform_device *pdev) suspend_wfi_flags |= WFI_FLAG_SELF_REFRESH; suspend_wfi_flags |= WFI_FLAG_SAVE_EMIF; suspend_wfi_flags |= WFI_FLAG_WAKE_M3; +#endif /* CONFIG_SUSPEND */ ret = pm_ops->init(); if (ret) { diff --git a/drivers/soc/xilinx/zynqmp_pm_domains.c b/drivers/soc/xilinx/zynqmp_pm_domains.c index 354d256e6e00..600f57cf0c2e 100644 --- a/drivers/soc/xilinx/zynqmp_pm_domains.c +++ b/drivers/soc/xilinx/zynqmp_pm_domains.c @@ -23,6 +23,8 @@ /* Flag stating if PM nodes mapped to the PM domain has been requested */ #define ZYNQMP_PM_DOMAIN_REQUESTED BIT(0) +static const struct zynqmp_eemi_ops *eemi_ops; + /** * struct zynqmp_pm_domain - Wrapper around struct generic_pm_domain * @gpd: Generic power domain @@ -71,9 +73,8 @@ static int zynqmp_gpd_power_on(struct generic_pm_domain *domain) { int ret; struct zynqmp_pm_domain *pd; - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); - if (!eemi_ops || !eemi_ops->set_requirement) + if (!eemi_ops->set_requirement) return -ENXIO; pd = container_of(domain, struct zynqmp_pm_domain, gpd); @@ -107,9 +108,8 @@ static int zynqmp_gpd_power_off(struct generic_pm_domain *domain) struct zynqmp_pm_domain *pd; u32 capabilities = 0; bool may_wakeup; - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); - if (!eemi_ops || !eemi_ops->set_requirement) + if (!eemi_ops->set_requirement) return -ENXIO; pd = container_of(domain, struct zynqmp_pm_domain, gpd); @@ -160,9 +160,8 @@ static int zynqmp_gpd_attach_dev(struct generic_pm_domain *domain, { int ret; struct zynqmp_pm_domain *pd; - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); - if (!eemi_ops || !eemi_ops->request_node) + if (!eemi_ops->request_node) return -ENXIO; pd = container_of(domain, struct zynqmp_pm_domain, gpd); @@ -197,9 +196,8 @@ static void zynqmp_gpd_detach_dev(struct generic_pm_domain *domain, { int ret; struct zynqmp_pm_domain *pd; - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); - if (!eemi_ops || !eemi_ops->release_node) + if (!eemi_ops->release_node) return; pd = container_of(domain, struct zynqmp_pm_domain, gpd); @@ -266,6 +264,10 @@ static int zynqmp_gpd_probe(struct platform_device *pdev) struct zynqmp_pm_domain *pd; struct device *dev = &pdev->dev; + eemi_ops = zynqmp_pm_get_eemi_ops(); + if (IS_ERR(eemi_ops)) + return PTR_ERR(eemi_ops); + pd = devm_kcalloc(dev, ZYNQMP_NUM_DOMAINS, sizeof(*pd), GFP_KERNEL); if (!pd) return -ENOMEM; diff --git a/drivers/soc/xilinx/zynqmp_power.c b/drivers/soc/xilinx/zynqmp_power.c index 771cb59b9d22..1b9d14411a15 100644 --- a/drivers/soc/xilinx/zynqmp_power.c +++ b/drivers/soc/xilinx/zynqmp_power.c @@ -31,6 +31,7 @@ static const char *const suspend_modes[] = { }; static enum pm_suspend_mode suspend_mode = PM_SUSPEND_MODE_STD; +static const struct zynqmp_eemi_ops *eemi_ops; enum pm_api_cb_id { PM_INIT_SUSPEND_CB = 30, @@ -92,9 +93,8 @@ static ssize_t suspend_mode_store(struct device *dev, const char *buf, size_t count) { int md, ret = -EINVAL; - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); - if (!eemi_ops || !eemi_ops->set_suspend_mode) + if (!eemi_ops->set_suspend_mode) return ret; for (md = PM_SUSPEND_MODE_FIRST; md < ARRAY_SIZE(suspend_modes); md++) @@ -120,9 +120,11 @@ static int zynqmp_pm_probe(struct platform_device *pdev) int ret, irq; u32 pm_api_version; - const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + eemi_ops = zynqmp_pm_get_eemi_ops(); + if (IS_ERR(eemi_ops)) + return PTR_ERR(eemi_ops); - if (!eemi_ops || !eemi_ops->get_api_version || !eemi_ops->init_finalize) + if (!eemi_ops->get_api_version || !eemi_ops->init_finalize) return -ENXIO; eemi_ops->init_finalize(); diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c index 9f83e1b17aa1..9850a0efe85a 100644 --- a/drivers/spi/spi-zynqmp-gqspi.c +++ b/drivers/spi/spi-zynqmp-gqspi.c @@ -14,6 +14,7 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> +#include <linux/firmware/xlnx-zynqmp.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> @@ -138,6 +139,7 @@ #define SPI_AUTOSUSPEND_TIMEOUT 3000 enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA}; +static const struct zynqmp_eemi_ops *eemi_ops; /** * struct zynqmp_qspi - Defines qspi driver instance @@ -1021,6 +1023,10 @@ static int zynqmp_qspi_probe(struct platform_device *pdev) struct resource *res; struct device *dev = &pdev->dev; + eemi_ops = zynqmp_pm_get_eemi_ops(); + if (IS_ERR(eemi_ops)) + return PTR_ERR(eemi_ops); + master = spi_alloc_master(&pdev->dev, sizeof(*xqspi)); if (!master) return -ENOMEM; diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index 0842b6e6af82..48963eab32f5 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -419,9 +419,35 @@ static bool optee_msg_exchange_capabilities(optee_invoke_fn *invoke_fn, return true; } +static struct tee_shm_pool *optee_config_dyn_shm(void) +{ + struct tee_shm_pool_mgr *priv_mgr; + struct tee_shm_pool_mgr *dmabuf_mgr; + void *rc; + + rc = optee_shm_pool_alloc_pages(); + if (IS_ERR(rc)) + return rc; + priv_mgr = rc; + + rc = optee_shm_pool_alloc_pages(); + if (IS_ERR(rc)) { + tee_shm_pool_mgr_destroy(priv_mgr); + return rc; + } + dmabuf_mgr = rc; + + rc = tee_shm_pool_alloc(priv_mgr, dmabuf_mgr); + if (IS_ERR(rc)) { + tee_shm_pool_mgr_destroy(priv_mgr); + tee_shm_pool_mgr_destroy(dmabuf_mgr); + } + + return rc; +} + static struct tee_shm_pool * -optee_config_shm_memremap(optee_invoke_fn *invoke_fn, void **memremaped_shm, - u32 sec_caps) +optee_config_shm_memremap(optee_invoke_fn *invoke_fn, void **memremaped_shm) { union { struct arm_smccc_res smccc; @@ -436,10 +462,11 @@ optee_config_shm_memremap(optee_invoke_fn *invoke_fn, void **memremaped_shm, struct tee_shm_pool_mgr *priv_mgr; struct tee_shm_pool_mgr *dmabuf_mgr; void *rc; + const int sz = OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE; invoke_fn(OPTEE_SMC_GET_SHM_CONFIG, 0, 0, 0, 0, 0, 0, 0, &res.smccc); if (res.result.status != OPTEE_SMC_RETURN_OK) { - pr_info("shm service not available\n"); + pr_err("static shm service not available\n"); return ERR_PTR(-ENOENT); } @@ -465,28 +492,15 @@ optee_config_shm_memremap(optee_invoke_fn *invoke_fn, void **memremaped_shm, } vaddr = (unsigned long)va; - /* - * If OP-TEE can work with unregistered SHM, we will use own pool - * for private shm - */ - if (sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM) { - rc = optee_shm_pool_alloc_pages(); - if (IS_ERR(rc)) - goto err_memunmap; - priv_mgr = rc; - } else { - const size_t sz = OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE; - - rc = tee_shm_pool_mgr_alloc_res_mem(vaddr, paddr, sz, - 3 /* 8 bytes aligned */); - if (IS_ERR(rc)) - goto err_memunmap; - priv_mgr = rc; - - vaddr += sz; - paddr += sz; - size -= sz; - } + rc = tee_shm_pool_mgr_alloc_res_mem(vaddr, paddr, sz, + 3 /* 8 bytes aligned */); + if (IS_ERR(rc)) + goto err_memunmap; + priv_mgr = rc; + + vaddr += sz; + paddr += sz; + size -= sz; rc = tee_shm_pool_mgr_alloc_res_mem(vaddr, paddr, size, PAGE_SHIFT); if (IS_ERR(rc)) @@ -552,7 +566,7 @@ static optee_invoke_fn *get_invoke_func(struct device_node *np) static struct optee *optee_probe(struct device_node *np) { optee_invoke_fn *invoke_fn; - struct tee_shm_pool *pool; + struct tee_shm_pool *pool = ERR_PTR(-EINVAL); struct optee *optee = NULL; void *memremaped_shm = NULL; struct tee_device *teedev; @@ -581,13 +595,17 @@ static struct optee *optee_probe(struct device_node *np) } /* - * We have no other option for shared memory, if secure world - * doesn't have any reserved memory we can use we can't continue. + * Try to use dynamic shared memory if possible */ - if (!(sec_caps & OPTEE_SMC_SEC_CAP_HAVE_RESERVED_SHM)) - return ERR_PTR(-EINVAL); + if (sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM) + pool = optee_config_dyn_shm(); + + /* + * If dynamic shared memory is not available or failed - try static one + */ + if (IS_ERR(pool) && (sec_caps & OPTEE_SMC_SEC_CAP_HAVE_RESERVED_SHM)) + pool = optee_config_shm_memremap(invoke_fn, &memremaped_shm); - pool = optee_config_shm_memremap(invoke_fn, &memremaped_shm, sec_caps); if (IS_ERR(pool)) return (void *)pool; diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index ca8a94f15ac0..38183ac438c6 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -40,8 +40,6 @@ struct da8xx_ohci_hcd { struct phy *usb11_phy; struct regulator *vbus_reg; struct notifier_block nb; - unsigned int reg_enabled; - struct gpio_desc *vbus_gpio; struct gpio_desc *oc_gpio; }; @@ -92,29 +90,21 @@ static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on) struct device *dev = hcd->self.controller; int ret; - if (da8xx_ohci->vbus_gpio) { - gpiod_set_value_cansleep(da8xx_ohci->vbus_gpio, on); - return 0; - } - if (!da8xx_ohci->vbus_reg) return 0; - if (on && !da8xx_ohci->reg_enabled) { + if (on) { ret = regulator_enable(da8xx_ohci->vbus_reg); if (ret) { dev_err(dev, "Failed to enable regulator: %d\n", ret); return ret; } - da8xx_ohci->reg_enabled = 1; - - } else if (!on && da8xx_ohci->reg_enabled) { + } else { ret = regulator_disable(da8xx_ohci->vbus_reg); if (ret) { dev_err(dev, "Failed to disable regulator: %d\n", ret); return ret; } - da8xx_ohci->reg_enabled = 0; } return 0; @@ -124,9 +114,6 @@ static int ohci_da8xx_get_power(struct usb_hcd *hcd) { struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); - if (da8xx_ohci->vbus_gpio) - return gpiod_get_value_cansleep(da8xx_ohci->vbus_gpio); - if (da8xx_ohci->vbus_reg) return regulator_is_enabled(da8xx_ohci->vbus_reg); @@ -159,9 +146,6 @@ static int ohci_da8xx_has_set_power(struct usb_hcd *hcd) { struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); - if (da8xx_ohci->vbus_gpio) - return 1; - if (da8xx_ohci->vbus_reg) return 1; @@ -206,12 +190,18 @@ static int ohci_da8xx_regulator_event(struct notifier_block *nb, return 0; } -static irqreturn_t ohci_da8xx_oc_handler(int irq, void *data) +static irqreturn_t ohci_da8xx_oc_thread(int irq, void *data) { struct da8xx_ohci_hcd *da8xx_ohci = data; + struct device *dev = da8xx_ohci->hcd->self.controller; + int ret; - if (gpiod_get_value(da8xx_ohci->oc_gpio)) - gpiod_set_value(da8xx_ohci->vbus_gpio, 0); + if (gpiod_get_value_cansleep(da8xx_ohci->oc_gpio) && + da8xx_ohci->vbus_reg) { + ret = regulator_disable(da8xx_ohci->vbus_reg); + if (ret) + dev_err(dev, "Failed to disable regulator: %d\n", ret); + } return IRQ_HANDLED; } @@ -424,11 +414,6 @@ static int ohci_da8xx_probe(struct platform_device *pdev) } } - da8xx_ohci->vbus_gpio = devm_gpiod_get_optional(dev, "vbus", - GPIOD_OUT_HIGH); - if (IS_ERR(da8xx_ohci->vbus_gpio)) - goto err; - da8xx_ohci->oc_gpio = devm_gpiod_get_optional(dev, "oc", GPIOD_IN); if (IS_ERR(da8xx_ohci->oc_gpio)) goto err; @@ -438,8 +423,9 @@ static int ohci_da8xx_probe(struct platform_device *pdev) if (oc_irq < 0) goto err; - error = devm_request_irq(dev, oc_irq, ohci_da8xx_oc_handler, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + error = devm_request_threaded_irq(dev, oc_irq, NULL, + ohci_da8xx_oc_thread, IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "OHCI over-current indicator", da8xx_ohci); if (error) goto err; diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c index dd139cda936c..9067998759e3 100644 --- a/drivers/watchdog/ixp4xx_wdt.c +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/fs.h> #include <linux/miscdevice.h> +#include <linux/of.h> #include <linux/watchdog.h> #include <linux/init.h> #include <linux/bitops.h> @@ -176,6 +177,14 @@ static int __init ixp4xx_wdt_init(void) { int ret; + /* + * FIXME: we bail out on device tree boot but this really needs + * to be fixed in a nicer way: this registers the MDIO bus before + * even matching the driver infrastructure, we should only probe + * detected hardware. + */ + if (of_have_populated_dt()) + return -ENODEV; if (!(read_cpuid_id() & 0xf) && !cpu_is_ixp46x()) { pr_err("Rev. A0 IXP42x CPU detected - watchdog disabled\n"); diff --git a/include/dt-bindings/clock/xlnx,zynqmp-clk.h b/include/dt-bindings/clock/xlnx-zynqmp-clk.h index 4aebe6e2049e..cdc4c0b9a374 100644 --- a/include/dt-bindings/clock/xlnx,zynqmp-clk.h +++ b/include/dt-bindings/clock/xlnx-zynqmp-clk.h @@ -54,14 +54,14 @@ #define IOU_SWITCH 42 #define GEM_TSU_REF 43 #define GEM_TSU 44 -#define GEM0_REF 45 -#define GEM1_REF 46 -#define GEM2_REF 47 -#define GEM3_REF 48 -#define GEM0_TX 49 -#define GEM1_TX 50 -#define GEM2_TX 51 -#define GEM3_TX 52 +#define GEM0_TX 45 +#define GEM1_TX 46 +#define GEM2_TX 47 +#define GEM3_TX 48 +#define GEM0_RX 49 +#define GEM1_RX 50 +#define GEM2_RX 51 +#define GEM3_RX 52 #define QSPI_REF 53 #define SDIO0_REF 54 #define SDIO1_REF 55 @@ -112,5 +112,15 @@ #define VPLL_POST_SRC 100 #define CAN0_MIO 101 #define CAN1_MIO 102 +#define ACPU_FULL 103 +#define GEM0_REF 104 +#define GEM1_REF 105 +#define GEM2_REF 106 +#define GEM3_REF 107 +#define GEM0_REF_UNG 108 +#define GEM1_REF_UNG 109 +#define GEM2_REF_UNG 110 +#define GEM3_REF_UNG 111 +#define LPD_WDT 112 #endif diff --git a/include/dt-bindings/firmware/imx/rsrc.h b/include/dt-bindings/firmware/imx/rsrc.h index 4481f2d60d65..4e61f6485097 100644 --- a/include/dt-bindings/firmware/imx/rsrc.h +++ b/include/dt-bindings/firmware/imx/rsrc.h @@ -36,15 +36,11 @@ #define IMX_SC_R_DC_0_BLIT1 20 #define IMX_SC_R_DC_0_BLIT2 21 #define IMX_SC_R_DC_0_BLIT_OUT 22 -#define IMX_SC_R_DC_0_CAPTURE0 23 -#define IMX_SC_R_DC_0_CAPTURE1 24 +#define IMX_SC_R_PERF 23 #define IMX_SC_R_DC_0_WARP 25 -#define IMX_SC_R_DC_0_INTEGRAL0 26 -#define IMX_SC_R_DC_0_INTEGRAL1 27 #define IMX_SC_R_DC_0_VIDEO0 28 #define IMX_SC_R_DC_0_VIDEO1 29 #define IMX_SC_R_DC_0_FRAC0 30 -#define IMX_SC_R_DC_0_FRAC1 31 #define IMX_SC_R_DC_0 32 #define IMX_SC_R_GPU_2_PID0 33 #define IMX_SC_R_DC_0_PLL_0 34 @@ -53,17 +49,11 @@ #define IMX_SC_R_DC_1_BLIT1 37 #define IMX_SC_R_DC_1_BLIT2 38 #define IMX_SC_R_DC_1_BLIT_OUT 39 -#define IMX_SC_R_DC_1_CAPTURE0 40 -#define IMX_SC_R_DC_1_CAPTURE1 41 #define IMX_SC_R_DC_1_WARP 42 -#define IMX_SC_R_DC_1_INTEGRAL0 43 -#define IMX_SC_R_DC_1_INTEGRAL1 44 #define IMX_SC_R_DC_1_VIDEO0 45 #define IMX_SC_R_DC_1_VIDEO1 46 #define IMX_SC_R_DC_1_FRAC0 47 -#define IMX_SC_R_DC_1_FRAC1 48 #define IMX_SC_R_DC_1 49 -#define IMX_SC_R_GPU_3_PID0 50 #define IMX_SC_R_DC_1_PLL_0 51 #define IMX_SC_R_DC_1_PLL_1 52 #define IMX_SC_R_SPI_0 53 @@ -303,8 +293,6 @@ #define IMX_SC_R_M4_0_UART 287 #define IMX_SC_R_M4_0_I2C 288 #define IMX_SC_R_M4_0_INTMUX 289 -#define IMX_SC_R_M4_0_SIM 290 -#define IMX_SC_R_M4_0_WDOG 291 #define IMX_SC_R_M4_0_MU_0B 292 #define IMX_SC_R_M4_0_MU_0A0 293 #define IMX_SC_R_M4_0_MU_0A1 294 @@ -323,8 +311,6 @@ #define IMX_SC_R_M4_1_UART 307 #define IMX_SC_R_M4_1_I2C 308 #define IMX_SC_R_M4_1_INTMUX 309 -#define IMX_SC_R_M4_1_SIM 310 -#define IMX_SC_R_M4_1_WDOG 311 #define IMX_SC_R_M4_1_MU_0B 312 #define IMX_SC_R_M4_1_MU_0A0 313 #define IMX_SC_R_M4_1_MU_0A1 314 @@ -337,7 +323,7 @@ #define IMX_SC_R_IRQSTR_SCU2 321 #define IMX_SC_R_IRQSTR_DSP 322 #define IMX_SC_R_ELCDIF_PLL 323 -#define IMX_SC_R_UNUSED6 324 +#define IMX_SC_R_OCRAM 324 #define IMX_SC_R_AUDIO_PLL_0 325 #define IMX_SC_R_PI_0 326 #define IMX_SC_R_PI_0_PWM_0 327 @@ -554,6 +540,11 @@ #define IMX_SC_R_VPU_MU_3 538 #define IMX_SC_R_VPU_ENC_1 539 #define IMX_SC_R_VPU 540 -#define IMX_SC_R_LAST 541 +#define IMX_SC_R_DMA_5_CH0 541 +#define IMX_SC_R_DMA_5_CH1 542 +#define IMX_SC_R_DMA_5_CH2 543 +#define IMX_SC_R_DMA_5_CH3 544 +#define IMX_SC_R_ATTESTATION 545 +#define IMX_SC_R_LAST 546 #endif /* __DT_BINDINGS_RSCRC_IMX_H */ diff --git a/include/dt-bindings/pinctrl/am33xx.h b/include/dt-bindings/pinctrl/am33xx.h index 7d947a597220..17877e85980b 100644 --- a/include/dt-bindings/pinctrl/am33xx.h +++ b/include/dt-bindings/pinctrl/am33xx.h @@ -40,5 +40,133 @@ #undef PIN_OFF_INPUT_PULLDOWN #undef PIN_OFF_WAKEUPENABLE -#endif +#define AM335X_PIN_OFFSET_MIN 0x0800U + +#define AM335X_PIN_GPMC_AD0 0x800 +#define AM335X_PIN_GPMC_AD1 0x804 +#define AM335X_PIN_GPMC_AD2 0x808 +#define AM335X_PIN_GPMC_AD3 0x80c +#define AM335X_PIN_GPMC_AD4 0x810 +#define AM335X_PIN_GPMC_AD5 0x814 +#define AM335X_PIN_GPMC_AD6 0x818 +#define AM335X_PIN_GPMC_AD7 0x81c +#define AM335X_PIN_GPMC_AD8 0x820 +#define AM335X_PIN_GPMC_AD9 0x824 +#define AM335X_PIN_GPMC_AD10 0x828 +#define AM335X_PIN_GPMC_AD11 0x82c +#define AM335X_PIN_GPMC_AD12 0x830 +#define AM335X_PIN_GPMC_AD13 0x834 +#define AM335X_PIN_GPMC_AD14 0x838 +#define AM335X_PIN_GPMC_AD15 0x83c +#define AM335X_PIN_GPMC_A0 0x840 +#define AM335X_PIN_GPMC_A1 0x844 +#define AM335X_PIN_GPMC_A2 0x848 +#define AM335X_PIN_GPMC_A3 0x84c +#define AM335X_PIN_GPMC_A4 0x850 +#define AM335X_PIN_GPMC_A5 0x854 +#define AM335X_PIN_GPMC_A6 0x858 +#define AM335X_PIN_GPMC_A7 0x85c +#define AM335X_PIN_GPMC_A8 0x860 +#define AM335X_PIN_GPMC_A9 0x864 +#define AM335X_PIN_GPMC_A10 0x868 +#define AM335X_PIN_GPMC_A11 0x86c +#define AM335X_PIN_GPMC_WAIT0 0x870 +#define AM335X_PIN_GPMC_WPN 0x874 +#define AM335X_PIN_GPMC_BEN1 0x878 +#define AM335X_PIN_GPMC_CSN0 0x87c +#define AM335X_PIN_GPMC_CSN1 0x880 +#define AM335X_PIN_GPMC_CSN2 0x884 +#define AM335X_PIN_GPMC_CSN3 0x888 +#define AM335X_PIN_GPMC_CLK 0x88c +#define AM335X_PIN_GPMC_ADVN_ALE 0x890 +#define AM335X_PIN_GPMC_OEN_REN 0x894 +#define AM335X_PIN_GPMC_WEN 0x898 +#define AM335X_PIN_GPMC_BEN0_CLE 0x89c +#define AM335X_PIN_LCD_DATA0 0x8a0 +#define AM335X_PIN_LCD_DATA1 0x8a4 +#define AM335X_PIN_LCD_DATA2 0x8a8 +#define AM335X_PIN_LCD_DATA3 0x8ac +#define AM335X_PIN_LCD_DATA4 0x8b0 +#define AM335X_PIN_LCD_DATA5 0x8b4 +#define AM335X_PIN_LCD_DATA6 0x8b8 +#define AM335X_PIN_LCD_DATA7 0x8bc +#define AM335X_PIN_LCD_DATA8 0x8c0 +#define AM335X_PIN_LCD_DATA9 0x8c4 +#define AM335X_PIN_LCD_DATA10 0x8c8 +#define AM335X_PIN_LCD_DATA11 0x8cc +#define AM335X_PIN_LCD_DATA12 0x8d0 +#define AM335X_PIN_LCD_DATA13 0x8d4 +#define AM335X_PIN_LCD_DATA14 0x8d8 +#define AM335X_PIN_LCD_DATA15 0x8dc +#define AM335X_PIN_LCD_VSYNC 0x8e0 +#define AM335X_PIN_LCD_HSYNC 0x8e4 +#define AM335X_PIN_LCD_PCLK 0x8e8 +#define AM335X_PIN_LCD_AC_BIAS_EN 0x8ec +#define AM335X_PIN_MMC0_DAT3 0x8f0 +#define AM335X_PIN_MMC0_DAT2 0x8f4 +#define AM335X_PIN_MMC0_DAT1 0x8f8 +#define AM335X_PIN_MMC0_DAT0 0x8fc +#define AM335X_PIN_MMC0_CLK 0x900 +#define AM335X_PIN_MMC0_CMD 0x904 +#define AM335X_PIN_MII1_COL 0x908 +#define AM335X_PIN_MII1_CRS 0x90c +#define AM335X_PIN_MII1_RX_ER 0x910 +#define AM335X_PIN_MII1_TX_EN 0x914 +#define AM335X_PIN_MII1_RX_DV 0x918 +#define AM335X_PIN_MII1_TXD3 0x91c +#define AM335X_PIN_MII1_TXD2 0x920 +#define AM335X_PIN_MII1_TXD1 0x924 +#define AM335X_PIN_MII1_TXD0 0x928 +#define AM335X_PIN_MII1_TX_CLK 0x92c +#define AM335X_PIN_MII1_RX_CLK 0x930 +#define AM335X_PIN_MII1_RXD3 0x934 +#define AM335X_PIN_MII1_RXD2 0x938 +#define AM335X_PIN_MII1_RXD1 0x93c +#define AM335X_PIN_MII1_RXD0 0x940 +#define AM335X_PIN_RMII1_REF_CLK 0x944 +#define AM335X_PIN_MDIO 0x948 +#define AM335X_PIN_MDC 0x94c +#define AM335X_PIN_SPI0_SCLK 0x950 +#define AM335X_PIN_SPI0_D0 0x954 +#define AM335X_PIN_SPI0_D1 0x958 +#define AM335X_PIN_SPI0_CS0 0x95c +#define AM335X_PIN_SPI0_CS1 0x960 +#define AM335X_PIN_ECAP0_IN_PWM0_OUT 0x964 +#define AM335X_PIN_UART0_CTSN 0x968 +#define AM335X_PIN_UART0_RTSN 0x96c +#define AM335X_PIN_UART0_RXD 0x970 +#define AM335X_PIN_UART0_TXD 0x974 +#define AM335X_PIN_UART1_CTSN 0x978 +#define AM335X_PIN_UART1_RTSN 0x97c +#define AM335X_PIN_UART1_RXD 0x980 +#define AM335X_PIN_UART1_TXD 0x984 +#define AM335X_PIN_I2C0_SDA 0x988 +#define AM335X_PIN_I2C0_SCL 0x98c +#define AM335X_PIN_MCASP0_ACLKX 0x990 +#define AM335X_PIN_MCASP0_FSX 0x994 +#define AM335X_PIN_MCASP0_AXR0 0x998 +#define AM335X_PIN_MCASP0_AHCLKR 0x99c +#define AM335X_PIN_MCASP0_ACLKR 0x9a0 +#define AM335X_PIN_MCASP0_FSR 0x9a4 +#define AM335X_PIN_MCASP0_AXR1 0x9a8 +#define AM335X_PIN_MCASP0_AHCLKX 0x9ac +#define AM335X_PIN_XDMA_EVENT_INTR0 0x9b0 +#define AM335X_PIN_XDMA_EVENT_INTR1 0x9b4 +#define AM335X_PIN_WARMRSTN 0x9b8 +#define AM335X_PIN_NNMI 0x9c0 +#define AM335X_PIN_TMS 0x9d0 +#define AM335X_PIN_TDI 0x9d4 +#define AM335X_PIN_TDO 0x9d8 +#define AM335X_PIN_TCK 0x9dc +#define AM335X_PIN_TRSTN 0x9e0 +#define AM335X_PIN_EMU0 0x9e4 +#define AM335X_PIN_EMU1 0x9e8 +#define AM335X_PIN_RTC_PWRONRSTN 0x9f8 +#define AM335X_PIN_PMIC_POWER_EN 0x9fc +#define AM335X_PIN_EXT_WAKEUP 0xa00 +#define AM335X_PIN_USB0_DRVVBUS 0xa1c +#define AM335X_PIN_USB1_DRVVBUS 0xa34 +#define AM335X_PIN_OFFSET_MAX 0x0a34U + +#endif diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h index 49b5dea2b388..625718042413 100644 --- a/include/dt-bindings/pinctrl/omap.h +++ b/include/dt-bindings/pinctrl/omap.h @@ -65,6 +65,7 @@ #define DM814X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) #define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) #define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) +#define AM33XX_PADCONF(pa, dir, mux) OMAP_IOPAD_OFFSET((pa), 0x0800) ((dir) | (mux)) /* * Macros to allow using the offset from the padconf physical address diff --git a/include/dt-bindings/power/r8a77965-sysc.h b/include/dt-bindings/power/r8a77965-sysc.h index 05a4b5917314..de82d8a15ea1 100644 --- a/include/dt-bindings/power/r8a77965-sysc.h +++ b/include/dt-bindings/power/r8a77965-sysc.h @@ -21,7 +21,6 @@ #define R8A77965_PD_A3VC 14 #define R8A77965_PD_3DG_A 17 #define R8A77965_PD_3DG_B 18 -#define R8A77965_PD_A3IR 24 #define R8A77965_PD_A2VC1 26 /* Always-on power area */ diff --git a/include/linux/firmware/imx/sci.h b/include/linux/firmware/imx/sci.h index ebc55098faee..17ba4e405129 100644 --- a/include/linux/firmware/imx/sci.h +++ b/include/linux/firmware/imx/sci.h @@ -15,4 +15,9 @@ #include <linux/firmware/imx/svc/misc.h> #include <linux/firmware/imx/svc/pm.h> + +int imx_scu_enable_general_irq_channel(struct device *dev); +int imx_scu_irq_register_notifier(struct notifier_block *nb); +int imx_scu_irq_unregister_notifier(struct notifier_block *nb); +int imx_scu_irq_group_enable(u8 group, u32 mask, u8 enable); #endif /* _SC_SCI_H */ diff --git a/arch/arm/include/asm/trusted_foundations.h b/include/linux/firmware/trusted_foundations.h index 00748350cf72..4064e7c74715 100644 --- a/arch/arm/include/asm/trusted_foundations.h +++ b/include/linux/firmware/trusted_foundations.h @@ -23,14 +23,24 @@ * PSCI standard. */ -#ifndef __ASM_ARM_TRUSTED_FOUNDATIONS_H -#define __ASM_ARM_TRUSTED_FOUNDATIONS_H +#ifndef __FIRMWARE_TRUSTED_FOUNDATIONS_H +#define __FIRMWARE_TRUSTED_FOUNDATIONS_H #include <linux/printk.h> #include <linux/bug.h> #include <linux/of.h> #include <linux/cpu.h> #include <linux/smp.h> +#include <linux/types.h> + +#include <asm/hardware/cache-l2x0.h> +#include <asm/outercache.h> + +#define TF_PM_MODE_LP0 0 +#define TF_PM_MODE_LP1 1 +#define TF_PM_MODE_LP1_NO_MC_CLK 2 +#define TF_PM_MODE_LP2 3 +#define TF_PM_MODE_LP2_NOFLUSH_L2 4 struct trusted_foundations_platform_data { unsigned int version_major; @@ -41,8 +51,12 @@ struct trusted_foundations_platform_data { void register_trusted_foundations(struct trusted_foundations_platform_data *pd); void of_register_trusted_foundations(void); +bool trusted_foundations_registered(void); #else /* CONFIG_TRUSTED_FOUNDATIONS */ +static inline void tf_dummy_write_sec(unsigned long val, unsigned int reg) +{ +} static inline void register_trusted_foundations( struct trusted_foundations_platform_data *pd) @@ -53,6 +67,10 @@ static inline void register_trusted_foundations( */ pr_err("No support for Trusted Foundations, continuing in degraded mode.\n"); pr_err("Secondary processors as well as CPU PM will be disabled.\n"); +#if IS_ENABLED(CONFIG_CACHE_L2X0) + pr_err("L2X0 cache will be kept disabled.\n"); + outer_cache.write_sec = tf_dummy_write_sec; +#endif #if IS_ENABLED(CONFIG_SMP) setup_max_cpus = 0; #endif @@ -68,6 +86,11 @@ static inline void of_register_trusted_foundations(void) if (of_find_compatible_node(NULL, NULL, "tlm,trusted-foundations")) register_trusted_foundations(NULL); } + +static inline bool trusted_foundations_registered(void) +{ + return false; +} #endif /* CONFIG_TRUSTED_FOUNDATIONS */ #endif diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 642dab10f65d..1262ea6a1f4b 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -48,6 +48,14 @@ #define ZYNQMP_PM_CAPABILITY_WAKEUP 0x4U #define ZYNQMP_PM_CAPABILITY_POWER 0x8U +/* + * Firmware FPGA Manager flags + * XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration + * XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration + */ +#define XILINX_ZYNQMP_PM_FPGA_FULL 0x0U +#define XILINX_ZYNQMP_PM_FPGA_PARTIAL BIT(0) + enum pm_api_id { PM_GET_API_VERSION = 1, PM_REQUEST_NODE = 13, @@ -56,6 +64,8 @@ enum pm_api_id { PM_RESET_ASSERT = 17, PM_RESET_GET_STATUS, PM_PM_INIT_FINALIZE = 21, + PM_FPGA_LOAD, + PM_FPGA_GET_STATUS, PM_GET_CHIPID = 24, PM_IOCTL = 34, PM_QUERY_DATA, @@ -258,6 +268,8 @@ struct zynqmp_pm_query_data { struct zynqmp_eemi_ops { int (*get_api_version)(u32 *version); int (*get_chipid)(u32 *idcode, u32 *version); + int (*fpga_load)(const u64 address, const u32 size, const u32 flags); + int (*fpga_get_status)(u32 *value); int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out); int (*clock_enable)(u32 clock_id); int (*clock_disable)(u32 clock_id); @@ -293,7 +305,7 @@ const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void); #else static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void) { - return NULL; + return ERR_PTR(-ENODEV); } #endif diff --git a/include/linux/irqchip/irq-ixp4xx.h b/include/linux/irqchip/irq-ixp4xx.h new file mode 100644 index 000000000000..9395917d6936 --- /dev/null +++ b/include/linux/irqchip/irq-ixp4xx.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __IRQ_IXP4XX_H +#define __IRQ_IXP4XX_H + +#include <linux/ioport.h> +struct irq_domain; + +void ixp4xx_irq_init(resource_size_t irqbase, + bool is_356); +struct irq_domain *ixp4xx_get_irq_domain(void); + +#endif /* __IRQ_IXP4XX_H */ diff --git a/include/linux/platform_data/eth-ep93xx.h b/include/linux/platform_data/eth-ep93xx.h new file mode 100644 index 000000000000..8eef637a804d --- /dev/null +++ b/include/linux/platform_data/eth-ep93xx.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_PLATFORM_DATA_ETH_EP93XX +#define _LINUX_PLATFORM_DATA_ETH_EP93XX + +struct ep93xx_eth_data { + unsigned char dev_addr[6]; + unsigned char phy_id; +}; + +#endif diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h index 0e36818e3680..3054fced8509 100644 --- a/include/linux/platform_data/keypad-ep93xx.h +++ b/include/linux/platform_data/keypad-ep93xx.h @@ -9,8 +9,7 @@ struct matrix_keymap_data; #define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ #define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ #define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ -#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ -#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ +#define EP93XX_KEYPAD_AUTOREPEAT (1<<4) /* enable key autorepeat */ /** * struct ep93xx_keypad_platform_data - platform specific device structure @@ -24,6 +23,7 @@ struct ep93xx_keypad_platform_data { unsigned int debounce; unsigned int prescale; unsigned int flags; + unsigned int clk_rate; }; #define EP93XX_MATRIX_ROWS (8) diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h index fbf5ed73c7cc..dd5971937a64 100644 --- a/include/linux/platform_data/pm33xx.h +++ b/include/linux/platform_data/pm33xx.h @@ -51,6 +51,11 @@ struct am33xx_pm_platform_data { unsigned long args); struct am33xx_pm_sram_addr *(*get_sram_addrs)(void); void __iomem *(*get_rtc_base_addr)(void); + void (*save_context)(void); + void (*restore_context)(void); + void (*prepare_rtc_suspend)(void); + void (*prepare_rtc_resume)(void); + int (*check_off_mode_enable)(void); }; struct am33xx_pm_sram_data { diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 1ea3aab972b4..9256c0305968 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -46,8 +46,13 @@ struct sysc_regbits { s8 emufree_shift; }; -#define SYSC_QUIRK_LEGACY_IDLE BIT(8) -#define SYSC_QUIRK_RESET_STATUS BIT(7) +#define SYSC_QUIRK_SWSUP_MSTANDBY BIT(13) +#define SYSC_QUIRK_SWSUP_SIDLE_ACT BIT(12) +#define SYSC_QUIRK_SWSUP_SIDLE BIT(11) +#define SYSC_QUIRK_EXT_OPT_CLOCK BIT(10) +#define SYSC_QUIRK_LEGACY_IDLE BIT(9) +#define SYSC_QUIRK_RESET_STATUS BIT(8) +#define SYSC_QUIRK_NO_IDLE BIT(7) #define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6) #define SYSC_QUIRK_NO_RESET_ON_INIT BIT(5) #define SYSC_QUIRK_OPT_CLKS_NEEDED BIT(4) diff --git a/include/linux/platform_data/timer-ixp4xx.h b/include/linux/platform_data/timer-ixp4xx.h new file mode 100644 index 000000000000..ee92ae7edaed --- /dev/null +++ b/include/linux/platform_data/timer-ixp4xx.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __TIMER_IXP4XX_H +#define __TIMER_IXP4XX_H + +#include <linux/ioport.h> + +void __init ixp4xx_timer_setup(resource_size_t timerbase, + int timer_irq, + unsigned int timer_freq); + +#endif diff --git a/include/linux/reset.h b/include/linux/reset.h index 95d555c2130a..e7793fc0fa93 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -2,6 +2,8 @@ #ifndef _LINUX_RESET_H_ #define _LINUX_RESET_H_ +#include <linux/err.h> +#include <linux/errno.h> #include <linux/types.h> struct device; diff --git a/include/linux/rtc/rtc-omap.h b/include/linux/rtc/rtc-omap.h new file mode 100644 index 000000000000..9f03a329e63f --- /dev/null +++ b/include/linux/rtc/rtc-omap.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _LINUX_RTCOMAP_H_ +#define _LINUX_RTCOMAP_H_ + +int omap_rtc_power_off_program(struct device *dev); +#endif /* _LINUX_RTCOMAP_H_ */ diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h new file mode 100644 index 000000000000..56fbe2dc59b1 --- /dev/null +++ b/include/linux/soc/cirrus/ep93xx.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _SOC_EP93XX_H +#define _SOC_EP93XX_H + +struct platform_device; + +#define EP93XX_CHIP_REV_D0 3 +#define EP93XX_CHIP_REV_D1 4 +#define EP93XX_CHIP_REV_E0 5 +#define EP93XX_CHIP_REV_E1 6 +#define EP93XX_CHIP_REV_E2 7 + +#ifdef CONFIG_ARCH_EP93XX +int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); +void ep93xx_pwm_release_gpio(struct platform_device *pdev); +int ep93xx_ide_acquire_gpio(struct platform_device *pdev); +void ep93xx_ide_release_gpio(struct platform_device *pdev); +int ep93xx_keypad_acquire_gpio(struct platform_device *pdev); +void ep93xx_keypad_release_gpio(struct platform_device *pdev); +int ep93xx_i2s_acquire(void); +void ep93xx_i2s_release(void); +unsigned int ep93xx_chip_revision(void); + +#else +static inline int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) { return 0; } +static inline void ep93xx_pwm_release_gpio(struct platform_device *pdev) {} +static inline int ep93xx_ide_acquire_gpio(struct platform_device *pdev) { return 0; } +static inline void ep93xx_ide_release_gpio(struct platform_device *pdev) {} +static inline int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) { return 0; } +static inline void ep93xx_keypad_release_gpio(struct platform_device *pdev) {} +static inline int ep93xx_i2s_acquire(void) { return 0; } +static inline void ep93xx_i2s_release(void) {} +static inline unsigned int ep93xx_chip_revision(void) { return 0; } + +#endif + +#endif diff --git a/arch/arm/mach-ixp4xx/include/mach/npe.h b/include/linux/soc/ixp4xx/npe.h index 3a980845e557..2a91f465d456 100644 --- a/arch/arm/mach-ixp4xx/include/mach/npe.h +++ b/include/linux/soc/ixp4xx/npe.h @@ -16,9 +16,7 @@ struct npe_regs { }; struct npe { - struct resource *mem_res; struct npe_regs __iomem *regs; - u32 regs_phys; int id; int valid; }; diff --git a/include/linux/soc/ixp4xx/qmgr.h b/include/linux/soc/ixp4xx/qmgr.h new file mode 100644 index 000000000000..bed8ee94fa57 --- /dev/null +++ b/include/linux/soc/ixp4xx/qmgr.h @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#ifndef IXP4XX_QMGR_H +#define IXP4XX_QMGR_H + +#include <linux/io.h> +#include <linux/kernel.h> + +#define DEBUG_QMGR 0 + +#define HALF_QUEUES 32 +#define QUEUES 64 +#define MAX_QUEUE_LENGTH 4 /* in dwords */ + +#define QUEUE_STAT1_EMPTY 1 /* queue status bits */ +#define QUEUE_STAT1_NEARLY_EMPTY 2 +#define QUEUE_STAT1_NEARLY_FULL 4 +#define QUEUE_STAT1_FULL 8 +#define QUEUE_STAT2_UNDERFLOW 1 +#define QUEUE_STAT2_OVERFLOW 2 + +#define QUEUE_WATERMARK_0_ENTRIES 0 +#define QUEUE_WATERMARK_1_ENTRY 1 +#define QUEUE_WATERMARK_2_ENTRIES 2 +#define QUEUE_WATERMARK_4_ENTRIES 3 +#define QUEUE_WATERMARK_8_ENTRIES 4 +#define QUEUE_WATERMARK_16_ENTRIES 5 +#define QUEUE_WATERMARK_32_ENTRIES 6 +#define QUEUE_WATERMARK_64_ENTRIES 7 + +/* queue interrupt request conditions */ +#define QUEUE_IRQ_SRC_EMPTY 0 +#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1 +#define QUEUE_IRQ_SRC_NEARLY_FULL 2 +#define QUEUE_IRQ_SRC_FULL 3 +#define QUEUE_IRQ_SRC_NOT_EMPTY 4 +#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5 +#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6 +#define QUEUE_IRQ_SRC_NOT_FULL 7 + +struct qmgr_regs { + u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */ + u32 stat1[4]; /* 0x400 - 0x40F */ + u32 stat2[2]; /* 0x410 - 0x417 */ + u32 statne_h; /* 0x418 - queue nearly empty */ + u32 statf_h; /* 0x41C - queue full */ + u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */ + u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */ + u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */ + u32 reserved[1776]; + u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */ +}; + +void qmgr_put_entry(unsigned int queue, u32 val); +u32 qmgr_get_entry(unsigned int queue); +int qmgr_stat_empty(unsigned int queue); +int qmgr_stat_below_low_watermark(unsigned int queue); +int qmgr_stat_full(unsigned int queue); +int qmgr_stat_overflow(unsigned int queue); +void qmgr_release_queue(unsigned int queue); +void qmgr_set_irq(unsigned int queue, int src, + void (*handler)(void *pdev), void *pdev); +void qmgr_enable_irq(unsigned int queue); +void qmgr_disable_irq(unsigned int queue); + +/* request_ and release_queue() must be called from non-IRQ context */ + +#if DEBUG_QMGR +extern char qmgr_queue_descs[QUEUES][32]; + +int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark, + const char *desc_format, const char* name); +#else +int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark); +#define qmgr_request_queue(queue, len, nearly_empty_watermark, \ + nearly_full_watermark, desc_format, name) \ + __qmgr_request_queue(queue, len, nearly_empty_watermark, \ + nearly_full_watermark) +#endif + +#endif diff --git a/include/linux/ti-emif-sram.h b/include/linux/ti-emif-sram.h index 53604b087f2c..2fc854155c27 100644 --- a/include/linux/ti-emif-sram.h +++ b/include/linux/ti-emif-sram.h @@ -55,6 +55,7 @@ struct ti_emif_pm_data { struct ti_emif_pm_functions { u32 save_context; u32 restore_context; + u32 run_hw_leveling; u32 enter_sr; u32 exit_sr; u32 abort_sr; @@ -126,6 +127,8 @@ static inline void ti_emif_asm_offsets(void) offsetof(struct ti_emif_pm_functions, save_context)); DEFINE(EMIF_PM_RESTORE_CONTEXT_OFFSET, offsetof(struct ti_emif_pm_functions, restore_context)); + DEFINE(EMIF_PM_RUN_HW_LEVELING, + offsetof(struct ti_emif_pm_functions, run_hw_leveling)); DEFINE(EMIF_PM_ENTER_SR_OFFSET, offsetof(struct ti_emif_pm_functions, enter_sr)); DEFINE(EMIF_PM_EXIT_SR_OFFSET, diff --git a/sound/soc/cirrus/edb93xx.c b/sound/soc/cirrus/edb93xx.c index 3d011abaa266..f678b4c1514a 100644 --- a/sound/soc/cirrus/edb93xx.c +++ b/sound/soc/cirrus/edb93xx.c @@ -22,11 +22,11 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/module.h> +#include <linux/soc/cirrus/ep93xx.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> static int edb93xx_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) diff --git a/sound/soc/cirrus/ep93xx-ac97.c b/sound/soc/cirrus/ep93xx-ac97.c index cd5a939ad608..c6bc447429af 100644 --- a/sound/soc/cirrus/ep93xx-ac97.c +++ b/sound/soc/cirrus/ep93xx-ac97.c @@ -24,6 +24,7 @@ #include <sound/soc.h> #include <linux/platform_data/dma-ep93xx.h> +#include <linux/soc/cirrus/ep93xx.h> #include "ep93xx-pcm.h" diff --git a/sound/soc/cirrus/ep93xx-i2s.c b/sound/soc/cirrus/ep93xx-i2s.c index 0918c5da575a..beab7c516855 100644 --- a/sound/soc/cirrus/ep93xx-i2s.c +++ b/sound/soc/cirrus/ep93xx-i2s.c @@ -27,9 +27,8 @@ #include <sound/initval.h> #include <sound/soc.h> -#include <mach/hardware.h> -#include <mach/ep93xx-regs.h> #include <linux/platform_data/dma-ep93xx.h> +#include <linux/soc/cirrus/ep93xx.h> #include "ep93xx-pcm.h" diff --git a/sound/soc/cirrus/simone.c b/sound/soc/cirrus/simone.c index 1ec661834e5a..cb850530331b 100644 --- a/sound/soc/cirrus/simone.c +++ b/sound/soc/cirrus/simone.c @@ -13,13 +13,13 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/soc/cirrus/ep93xx.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> static struct snd_soc_dai_link simone_dai = { .name = "AC97", diff --git a/sound/soc/cirrus/snappercl15.c b/sound/soc/cirrus/snappercl15.c index 11ff7b2672b2..dea4909154c8 100644 --- a/sound/soc/cirrus/snappercl15.c +++ b/sound/soc/cirrus/snappercl15.c @@ -13,12 +13,12 @@ #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/soc/cirrus/ep93xx.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include "../codecs/tlv320aic23.h" |