Merge remote-tracking branch 'sunxi/sunxi/for-next'

44 files changed, 1252 insertions, 373 deletions

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 460ef27b1008..47d2e902ced4 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -21,6 +21,7 @@ Required properties :
 		- "allwinner,sun50i-a64-r-ccu"
 		- "allwinner,sun50i-h5-ccu"
 		- "allwinner,sun50i-h6-ccu"
+		- "allwinner,sun50i-h6-r-ccu"
 		- "nextthing,gr8-ccu"
 
 - reg: Must contain the registers base address and length
@@ -35,7 +36,7 @@ Required properties :
 For the main CCU on H6, one more clock is needed:
 - "iosc": the SoC's internal frequency oscillator
 
-For the PRCM CCUs on A83T/H3/A64, two more clocks are needed:
+For the PRCM CCUs on A83T/H3/A64/H6, two more clocks are needed:
 - "pll-periph": the SoC's peripheral PLL from the main CCU
 - "iosc": the SoC's internal frequency oscillator
 
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
index d69543701d5d..e319fe5e205a 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@@ -4,6 +4,7 @@ Required properties:
 - compatible: Should be one of the following:
   "allwinner,sun4i-a10-sid"
   "allwinner,sun7i-a20-sid"
+  "allwinner,sun8i-a83t-sid"
   "allwinner,sun8i-h3-sid"
   "allwinner,sun50i-a64-sid"
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7424351eb248..ec2024ea8b1e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -997,8 +997,9 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a83t-bananapi-m3.dtb \
 	sun8i-a83t-cubietruck-plus.dtb \
 	sun8i-a83t-tbs-a711.dtb \
-	sun8i-h2-plus-orangepi-r1.dtb \
 	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
 	sun8i-h2-plus-orangepi-zero.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
 	sun8i-h3-beelink-x2.dtb \
@@ -1015,6 +1016,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h3-orangepi-plus.dtb \
 	sun8i-h3-orangepi-plus2e.dtb \
 	sun8i-r16-bananapi-m2m.dtb \
+	sun8i-r16-nintendo-nes-classic.dtb \
+	sun8i-r16-nintendo-super-nes-classic.dtb \
 	sun8i-r16-parrot.dtb \
 	sun8i-r40-bananapi-m2-ultra.dtb \
 	sun8i-v3s-licheepi-zero.dtb \
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 77e8436beed4..3a1c6b45c9a1 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -76,7 +76,7 @@
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
 			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
 				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
-				 <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
 				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
 				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
 			status = "disabled";
@@ -88,7 +88,7 @@
 			allwinner,pipeline = "de_fe0-de_be0-lcd0";
 			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
 				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
-				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
 				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
 			status = "disabled";
 		};
@@ -99,7 +99,7 @@
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
 			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
 				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
-				 <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
 				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
 				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
index eae8e267b9ef..3d7b5c848fef 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -172,8 +172,7 @@
 	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 971f9be699a7..44f3cad3de75 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -198,6 +198,8 @@
 			clock-names = "ahb", "mod";
 			resets = <&ccu RST_BUS_NAND>;
 			reset-names = "ahb";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -315,6 +317,37 @@
 				bias-pull-up;
 			};
 
+			nand_pins: nand-pins {
+				pins = "PC0", "PC1", "PC2", "PC5",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14", "PC15";
+				function = "nand0";
+			};
+
+			nand_pins_cs0: nand-pins-cs0 {
+				pins = "PC4";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_pins_cs1: nand-pins-cs1 {
+				pins = "PC3";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_pins_rb0: nand-pins-rb0 {
+				pins = "PC6";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_pins_rb1: nand-pins-rb1 {
+				pins = "PC7";
+				function = "nand0";
+				bias-pull-up;
+			};
+
 			pwm0_pins: pwm0 {
 				pins = "PH0";
 				function = "pwm0";
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index a21f2ed07a52..8d278ee001e9 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -236,6 +236,11 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <1>;
+
+					tcon0_out_dsi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&dsi_in_tcon0>;
+					};
 				};
 			};
 		};
@@ -280,6 +285,45 @@
 			#io-channel-cells = <0>;
 		};
 
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun6i-a31-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_SCLK>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					dsi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_dsi>;
+					};
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		fe0: display-frontend@1e00000 {
 			compatible = "allwinner,sun8i-a33-display-frontend";
 			reg = <0x01e00000 0x20000>;
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 568307639be8..2be23d600957 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -66,6 +66,8 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <0>;
 		};
 
@@ -73,6 +75,8 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <1>;
 		};
 
@@ -80,6 +84,8 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <2>;
 		};
 
@@ -87,6 +93,8 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <3>;
 		};
 
@@ -96,6 +104,8 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <0x100>;
 		};
 
@@ -103,6 +113,8 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <0x101>;
 		};
 
@@ -110,6 +122,8 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <0x102>;
 		};
 
@@ -117,6 +131,8 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <0x103>;
 		};
 	};
@@ -349,6 +365,44 @@
 			};
 		};
 
+		cpucfg@1700000 {
+			compatible = "allwinner,sun8i-a83t-cpucfg";
+			reg = <0x01700000 0x400>;
+		};
+
+		cci@1790000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01790000 0x10000>;
+			ranges = <0x0 0x01790000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		syscon: syscon@1c00000 {
 			compatible = "allwinner,sun8i-a83t-system-controller",
 				"syscon";
@@ -492,6 +546,11 @@
 			#size-cells = <0>;
 		};
 
+		sid: eeprom@1c14000 {
+			compatible = "allwinner,sun8i-a83t-sid";
+			reg = <0x1c14000 0x400>;
+		};
+
 		usb_otg: usb@1c19000 {
 			compatible = "allwinner,sun8i-a83t-musb",
 				     "allwinner,sun8i-a33-musb";
@@ -928,6 +987,11 @@
 			#reset-cells = <1>;
 		};
 
+		r_cpucfg@1f01c00 {
+			compatible = "allwinner,sun8i-a83t-r-cpucfg";
+			reg = <0x1f01c00 0x400>;
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-a83t-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
new file mode 100644
index 000000000000..4db0d4bb65eb
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H2+";
+	compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus";
+};
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index 0bc031fe4c56..84cd9c061227 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -89,6 +89,23 @@
 		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
 	};
 
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <1>;
+		states = <1100000 0
+			  1300000 1>;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
@@ -96,6 +113,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &ehci0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
index b20a710da7bc..a8b2f0f1c11d 100644
--- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
@@ -6,213 +6,9 @@
 
 /dts-v1/;
 #include "sun8i-h3.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sunxi-libretech-all-h3-cc.dtsi"
 
 / {
 	model = "Libre Computer Board ALL-H3-CC H3";
 	compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
-
-	aliases {
-		ethernet0 = &emac;
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&hdmi_out_con>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pwr_led {
-			label = "librecomputer:green:pwr";
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
-			default-state = "on";
-		};
-
-		status_led {
-			label = "librecomputer:blue:status";
-			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "power";
-			linux,code = <KEY_POWER>;
-			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-		};
-	};
-
-	reg_vcc1v2: vcc1v2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v2";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_vcc5v0>;
-		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
-		enable-active-high;
-	};
-
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&reg_vcc5v0>;
-	};
-
-	/* This represents the board's 5V input */
-	reg_vcc5v0: vcc5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_vcc_dram: vcc-dram {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc-dram";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_vcc5v0>;
-		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
-		enable-active-high;
-	};
-
-	reg_vcc_io: vcc-io {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc-io";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_vcc3v3>;
-		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
-	};
-
-	reg_vdd_cpux: vdd-cpux {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-cpux";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_vcc5v0>;
-		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
-		enable-active-high;
-	};
-};
-
-&codec {
-	allwinner,audio-routing =
-		"Line Out", "LINEOUT",
-		"MIC1", "Mic",
-		"Mic",  "MBIAS";
-	status = "okay";
-};
-
-&de {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&ehci2 {
-	status = "okay";
-};
-
-&ehci3 {
-	status = "okay";
-};
-
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_out {
-	hdmi_out_con: endpoint {
-		remote-endpoint = <&hdmi_con_in>;
-	};
-};
-
-&ir {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
-	status = "okay";
-};
-
-&mmc0 {
-	vmmc-supply = <&reg_vcc_io>;
-	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&ohci2 {
-	status = "okay";
-};
-
-&ohci3 {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	/* VBUS on USB ports are always on */
-	usb0_vbus-supply = <&reg_vcc5v0>;
-	usb1_vbus-supply = <&reg_vcc5v0>;
-	usb2_vbus-supply = <&reg_vcc5v0>;
-	usb3_vbus-supply = <&reg_vcc5v0>;
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 3328fe583c9b..245fd658defb 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -99,6 +99,27 @@
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0x0
+			  1300000 0x1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
 };
 
 &de {
@@ -117,6 +138,7 @@
 	phy-handle = <&int_mii_phy>;
 	phy-mode = "mii";
 	allwinner,leds-active-low;
+	status = "okay";
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 10da8ed7db81..41d57c76f290 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -43,32 +43,62 @@
 #include "sunxi-h3-h5.dtsi"
 
 / {
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000 1040000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp@816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp@1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
new file mode 100644
index 000000000000..fc0658cfa319
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com> */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Nintendo NES Classic Edition";
+	compatible = "nintendo,nes-classic", "allwinner,sun8i-r16",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	/*
+	 * UART0 is available on two ports: PB and PF, both are accessible.
+	 * PF can also be used for the SD card so PB is preferred.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&nfc {
+	status = "okay";
+
+	/* 2Gb Macronix MX30LF2G18AC (3V) */
+	nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	/* VBUS is always on because it is wired to the power supply */
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts
new file mode 100644
index 000000000000..80761d7904ec
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2018 Miquèl RAYNAL <miquel.raynal@bootlin.com> */
+
+/dts-v1/;
+#include "sun8i-r16-nintendo-nes-classic.dts"
+
+/ {
+	model = "Nintendo SuperNES Classic Edition";
+	compatible = "nintendo,super-nes-classic", "nintendo,nes-classic",
+		     "allwinner,sun8i-r16", "allwinner,sun8i-a33";
+};
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index a26d72c3f9b5..35859d8f3267 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -87,6 +87,11 @@
 	};
 };
 
+&ehci1 {
+	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -170,3 +175,8 @@
 	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 1be1a02d6df2..c3bff1105e5d 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -822,6 +822,19 @@
 			status = "disabled";
 		};
 
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&r_ccu CLK_APB0_I2C>;
+			resets = <&r_ccu RST_APB0_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-h3-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
@@ -837,6 +850,11 @@
 				pins = "PL11";
 				function = "s_cir_rx";
 			};
+
+			r_i2c_pins: r-i2c {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
new file mode 100644
index 000000000000..f7ffdd6658a2
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "librecomputer:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		};
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	/* VBUS on USB ports are always on */
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	usb3_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 70b4a14ed993..1e9f7af8f70f 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
+obj-$(CONFIG_SMP)		+= secure_cntvoff.o
 obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
 obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 CFLAGS_REMOVE_mcpm_entry.o	= -pg
diff --git a/arch/arm/common/secure_cntvoff.S b/arch/arm/common/secure_cntvoff.S
new file mode 100644
index 000000000000..53fc7bdb6c2e
--- /dev/null
+++ b/arch/arm/common/secure_cntvoff.S
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * Initialization of CNTVOFF register from secure mode
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ENTRY(secure_cntvoff_init)
+	.arch	armv7-a
+	/*
+	 * CNTVOFF has to be initialized either from non-secure Hypervisor
+	 * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
+	 * then it should be handled by the secure code. The CPU must implement
+	 * the virtualization extensions.
+	 */
+	cps	#MON_MODE
+	mrc	p15, 0, r1, c1, c1, 0		/* Get Secure Config */
+	orr	r0, r1, #1
+	mcr	p15, 0, r0, c1, c1, 0		/* Set Non Secure bit */
+	isb
+	mov	r0, #0
+	mcrr	p15, 4, r0, r0, c14		/* CNTVOFF = 0 */
+	isb
+	mcr	p15, 0, r1, c1, c1, 0		/* Set Secure bit */
+	isb
+	cps	#SVC_MODE
+	ret	lr
+ENDPROC(secure_cntvoff_init)
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index cb546425da8a..e7632f536633 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -2,9 +2,6 @@
 #ifndef __ASM_ARM_CPUTYPE_H
 #define __ASM_ARM_CPUTYPE_H
 
-#include <linux/stringify.h>
-#include <linux/kernel.h>
-
 #define CPUID_ID	0
 #define CPUID_CACHETYPE	1
 #define CPUID_TCM	2
@@ -98,6 +95,11 @@
 /* Qualcomm implemented cores */
 #define ARM_CPU_PART_SCORPION		0x510002d0
 
+#ifndef __ASSEMBLY__
+
+#include <linux/stringify.h>
+#include <linux/kernel.h>
+
 extern unsigned int processor_id;
 
 #ifdef CONFIG_CPU_CP15
@@ -326,4 +328,6 @@ static inline int __attribute_const__ cpuid_feature_extract_field(u32 features,
 #define cpuid_feature_extract(reg, field) \
 	cpuid_feature_extract_field(read_cpuid_ext(reg), field)
 
+#endif /* __ASSEMBLY__ */
+
 #endif
diff --git a/arch/arm/include/asm/secure_cntvoff.h b/arch/arm/include/asm/secure_cntvoff.h
new file mode 100644
index 000000000000..1f93aee1f630
--- /dev/null
+++ b/arch/arm/include/asm/secure_cntvoff.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASMARM_ARCH_CNTVOFF_H
+#define __ASMARM_ARCH_CNTVOFF_H
+
+extern void secure_cntvoff_init(void);
+
+#endif
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 43c1ac696274..2109f123bdfb 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -2,7 +2,6 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
-extern void shmobile_init_cntvoff(void);
 extern void shmobile_init_delay(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
diff --git a/arch/arm/mach-shmobile/headsmp-apmu.S b/arch/arm/mach-shmobile/headsmp-apmu.S
index 5672b5849401..d49ab194766a 100644
--- a/arch/arm/mach-shmobile/headsmp-apmu.S
+++ b/arch/arm/mach-shmobile/headsmp-apmu.S
@@ -11,29 +11,9 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-ENTRY(shmobile_init_cntvoff)
-	/*
-	 * CNTVOFF has to be initialized either from non-secure Hypervisor
-	 * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
-	 * then it should be handled by the secure code
-	 */
-	cps	#MON_MODE
-	mrc	p15, 0, r1, c1, c1, 0		/* Get Secure Config */
-	orr	r0, r1, #1
-	mcr	p15, 0, r0, c1, c1, 0		/* Set Non Secure bit */
-	instr_sync
-	mov	r0, #0
-	mcrr	p15, 4, r0, r0, c14		/* CNTVOFF = 0 */
-	instr_sync
-	mcr	p15, 0, r1, c1, c1, 0		/* Set Secure bit */
-	instr_sync
-	cps	#SVC_MODE
-	ret	lr
-ENDPROC(shmobile_init_cntvoff)
-
 #ifdef CONFIG_SMP
 ENTRY(shmobile_boot_apmu)
-	bl	shmobile_init_cntvoff
+	bl	secure_cntvoff_init
 	b	secondary_startup
 ENDPROC(shmobile_boot_apmu)
 #endif
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 80de6be912e1..88fdc1801d90 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -26,6 +26,7 @@
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
+#include <asm/secure_cntvoff.h>
 #include "common.h"
 #include "rcar-gen2.h"
 
@@ -70,7 +71,7 @@ void __init rcar_gen2_timer_init(void)
 	void __iomem *base;
 	u32 freq;
 
-	shmobile_init_cntvoff();
+	secure_cntvoff_init();
 
 	if (of_machine_is_compatible("renesas,r8a7745") ||
 	    of_machine_is_compatible("renesas,r8a77470") ||
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index ce53ceaf4cc5..d9c8ecf88ec6 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -51,7 +51,7 @@ config MACH_SUN9I
 config ARCH_SUNXI_MC_SMP
 	bool
 	depends on SMP
-	default MACH_SUN9I
+	default MACH_SUN9I || MACH_SUN8I
 	select ARM_CCI400_PORT_CTRL
 	select ARM_CPU_SUSPEND
 
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 7de9cc286d53..71429aa85143 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -1,5 +1,5 @@
 CFLAGS_mc_smp.o	+= -march=armv7-a
 
 obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
-obj-$(CONFIG_ARCH_SUNXI_MC_SMP) += mc_smp.o
+obj-$(CONFIG_ARCH_SUNXI_MC_SMP) += mc_smp.o headsmp.o
 obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-sunxi/headsmp.S b/arch/arm/mach-sunxi/headsmp.S
new file mode 100644
index 000000000000..32d76be98541
--- /dev/null
+++ b/arch/arm/mach-sunxi/headsmp.S
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2018 Chen-Yu Tsai
+ * Copyright (c) 2018 Bootlin
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ * Mylène Josserand <mylene.josserand@bootlin.com>
+ *
+ * SMP support for sunxi based systems with Cortex A7/A15
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cputype.h>
+
+ENTRY(sunxi_mc_smp_cluster_cache_enable)
+	.arch	armv7-a
+	/*
+	 * Enable cluster-level coherency, in preparation for turning on the MMU.
+	 *
+	 * Also enable regional clock gating and L2 data latency settings for
+	 * Cortex-A15. These settings are from the vendor kernel.
+	 */
+	mrc	p15, 0, r1, c0, c0, 0
+	movw	r2, #(ARM_CPU_PART_MASK & 0xffff)
+	movt	r2, #(ARM_CPU_PART_MASK >> 16)
+	and	r1, r1, r2
+	movw	r2, #(ARM_CPU_PART_CORTEX_A15 & 0xffff)
+	movt	r2, #(ARM_CPU_PART_CORTEX_A15 >> 16)
+	cmp	r1, r2
+	bne	not_a15
+
+	/* The following is Cortex-A15 specific */
+
+	/* ACTLR2: Enable CPU regional clock gates */
+	mrc p15, 1, r1, c15, c0, 4
+	orr r1, r1, #(0x1 << 31)
+	mcr p15, 1, r1, c15, c0, 4
+
+	/* L2ACTLR */
+	mrc p15, 1, r1, c15, c0, 0
+	/* Enable L2, GIC, and Timer regional clock gates */
+	orr r1, r1, #(0x1 << 26)
+	/* Disable clean/evict from being pushed to external */
+	orr r1, r1, #(0x1<<3)
+	mcr p15, 1, r1, c15, c0, 0
+
+	/* L2CTRL: L2 data RAM latency */
+	mrc p15, 1, r1, c9, c0, 2
+	bic r1, r1, #(0x7 << 0)
+	orr r1, r1, #(0x3 << 0)
+	mcr p15, 1, r1, c9, c0, 2
+
+	/* End of Cortex-A15 specific setup */
+	not_a15:
+
+	/* Get value of sunxi_mc_smp_first_comer */
+	adr	r1, first
+	ldr	r0, [r1]
+	ldr	r0, [r1, r0]
+
+	/* Skip cci_enable_port_for_self if not first comer */
+	cmp	r0, #0
+	bxeq	lr
+	b	cci_enable_port_for_self
+
+	.align 2
+	first: .word sunxi_mc_smp_first_comer - .
+ENDPROC(sunxi_mc_smp_cluster_cache_enable)
+
+ENTRY(sunxi_mc_smp_secondary_startup)
+	bl	sunxi_mc_smp_cluster_cache_enable
+	bl	secure_cntvoff_init
+	b	secondary_startup
+ENDPROC(sunxi_mc_smp_secondary_startup)
+
+ENTRY(sunxi_mc_smp_resume)
+	bl	sunxi_mc_smp_cluster_cache_enable
+	b	cpu_resume
+ENDPROC(sunxi_mc_smp_resume)
diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c
index c0246ec54a0a..b4037b603897 100644
--- a/arch/arm/mach-sunxi/mc_smp.c
+++ b/arch/arm/mach-sunxi/mc_smp.c
@@ -55,22 +55,35 @@
 #define CPUCFG_CX_RST_CTRL_L2_RST	BIT(8)
 #define CPUCFG_CX_RST_CTRL_CX_RST(n)	BIT(4 + (n))
 #define CPUCFG_CX_RST_CTRL_CORE_RST(n)	BIT(n)
+#define CPUCFG_CX_RST_CTRL_CORE_RST_ALL	(0xf << 0)
 
 #define PRCM_CPU_PO_RST_CTRL(c)		(0x4 + 0x4 * (c))
 #define PRCM_CPU_PO_RST_CTRL_CORE(n)	BIT(n)
 #define PRCM_CPU_PO_RST_CTRL_CORE_ALL	0xf
 #define PRCM_PWROFF_GATING_REG(c)	(0x100 + 0x4 * (c))
-#define PRCM_PWROFF_GATING_REG_CLUSTER	BIT(4)
+/* The power off register for clusters are different from a80 and a83t */
+#define PRCM_PWROFF_GATING_REG_CLUSTER_SUN8I	BIT(0)
+#define PRCM_PWROFF_GATING_REG_CLUSTER_SUN9I	BIT(4)
 #define PRCM_PWROFF_GATING_REG_CORE(n)	BIT(n)
 #define PRCM_PWR_SWITCH_REG(c, cpu)	(0x140 + 0x10 * (c) + 0x4 * (cpu))
 #define PRCM_CPU_SOFT_ENTRY_REG		0x164
 
+/* R_CPUCFG registers, specific to sun8i-a83t */
+#define R_CPUCFG_CLUSTER_PO_RST_CTRL(c)	(0x30 + (c) * 0x4)
+#define R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(n)	BIT(n)
+#define R_CPUCFG_CPU_SOFT_ENTRY_REG		0x01a4
+
 #define CPU0_SUPPORT_HOTPLUG_MAGIC0	0xFA50392F
 #define CPU0_SUPPORT_HOTPLUG_MAGIC1	0x790DCA3A
 
 static void __iomem *cpucfg_base;
 static void __iomem *prcm_base;
 static void __iomem *sram_b_smp_base;
+static void __iomem *r_cpucfg_base;
+
+extern void sunxi_mc_smp_secondary_startup(void);
+extern void sunxi_mc_smp_resume(void);
+static bool is_a83t;
 
 static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster)
 {
@@ -157,6 +170,16 @@ static int sunxi_cpu_powerup(unsigned int cpu, unsigned int cluster)
 	reg &= ~PRCM_CPU_PO_RST_CTRL_CORE(cpu);
 	writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
 
+	if (is_a83t) {
+		/* assert cpu power-on reset */
+		reg  = readl(r_cpucfg_base +
+			     R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+		reg &= ~(R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(cpu));
+		writel(reg, r_cpucfg_base +
+		       R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+		udelay(10);
+	}
+
 	/* Cortex-A7: hold L1 reset disable signal low */
 	if (!sunxi_core_is_cortex_a15(cpu, cluster)) {
 		reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG0(cluster));
@@ -180,17 +203,38 @@ static int sunxi_cpu_powerup(unsigned int cpu, unsigned int cluster)
 	/* open power switch */
 	sunxi_cpu_power_switch_set(cpu, cluster, true);
 
+	/* Handle A83T bit swap */
+	if (is_a83t) {
+		if (cpu == 0)
+			cpu = 4;
+	}
+
 	/* clear processor power gate */
 	reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
 	reg &= ~PRCM_PWROFF_GATING_REG_CORE(cpu);
 	writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
 	udelay(20);
 
+	/* Handle A83T bit swap */
+	if (is_a83t) {
+		if (cpu == 4)
+			cpu = 0;
+	}
+
 	/* de-assert processor power-on reset */
 	reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
 	reg |= PRCM_CPU_PO_RST_CTRL_CORE(cpu);
 	writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
 
+	if (is_a83t) {
+		reg  = readl(r_cpucfg_base +
+			     R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+		reg |= R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(cpu);
+		writel(reg, r_cpucfg_base +
+		       R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+		udelay(10);
+	}
+
 	/* de-assert all processor resets */
 	reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
 	reg |= CPUCFG_CX_RST_CTRL_DBG_RST(cpu);
@@ -212,6 +256,14 @@ static int sunxi_cluster_powerup(unsigned int cluster)
 	if (cluster >= SUNXI_NR_CLUSTERS)
 		return -EINVAL;
 
+	/* For A83T, assert cluster cores resets */
+	if (is_a83t) {
+		reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+		reg &= ~CPUCFG_CX_RST_CTRL_CORE_RST_ALL;   /* Core Reset    */
+		writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+		udelay(10);
+	}
+
 	/* assert ACINACTM */
 	reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
 	reg |= CPUCFG_CX_CTRL_REG1_ACINACTM;
@@ -222,6 +274,16 @@ static int sunxi_cluster_powerup(unsigned int cluster)
 	reg &= ~PRCM_CPU_PO_RST_CTRL_CORE_ALL;
 	writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
 
+	/* assert cluster cores resets */
+	if (is_a83t) {
+		reg  = readl(r_cpucfg_base +
+			     R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+		reg &= ~CPUCFG_CX_RST_CTRL_CORE_RST_ALL;
+		writel(reg, r_cpucfg_base +
+		       R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+		udelay(10);
+	}
+
 	/* assert cluster resets */
 	reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
 	reg &= ~CPUCFG_CX_RST_CTRL_DBG_SOC_RST;
@@ -252,7 +314,10 @@ static int sunxi_cluster_powerup(unsigned int cluster)
 
 	/* clear cluster power gate */
 	reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
-	reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER;
+	if (is_a83t)
+		reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER_SUN8I;
+	else
+		reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER_SUN9I;
 	writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
 	udelay(20);
 
@@ -300,74 +365,7 @@ static void sunxi_cluster_cache_disable_without_axi(void)
 }
 
 static int sunxi_mc_smp_cpu_table[SUNXI_NR_CLUSTERS][SUNXI_CPUS_PER_CLUSTER];
-static int sunxi_mc_smp_first_comer;
-
-/*
- * Enable cluster-level coherency, in preparation for turning on the MMU.
- *
- * Also enable regional clock gating and L2 data latency settings for
- * Cortex-A15. These settings are from the vendor kernel.
- */
-static void __naked sunxi_mc_smp_cluster_cache_enable(void)
-{
-	asm volatile (
-		"mrc	p15, 0, r1, c0, c0, 0\n"
-		"movw	r2, #" __stringify(ARM_CPU_PART_MASK & 0xffff) "\n"
-		"movt	r2, #" __stringify(ARM_CPU_PART_MASK >> 16) "\n"
-		"and	r1, r1, r2\n"
-		"movw	r2, #" __stringify(ARM_CPU_PART_CORTEX_A15 & 0xffff) "\n"
-		"movt	r2, #" __stringify(ARM_CPU_PART_CORTEX_A15 >> 16) "\n"
-		"cmp	r1, r2\n"
-		"bne	not_a15\n"
-
-		/* The following is Cortex-A15 specific */
-
-		/* ACTLR2: Enable CPU regional clock gates */
-		"mrc p15, 1, r1, c15, c0, 4\n"
-		"orr r1, r1, #(0x1<<31)\n"
-		"mcr p15, 1, r1, c15, c0, 4\n"
-
-		/* L2ACTLR */
-		"mrc p15, 1, r1, c15, c0, 0\n"
-		/* Enable L2, GIC, and Timer regional clock gates */
-		"orr r1, r1, #(0x1<<26)\n"
-		/* Disable clean/evict from being pushed to external */
-		"orr r1, r1, #(0x1<<3)\n"
-		"mcr p15, 1, r1, c15, c0, 0\n"
-
-		/* L2CTRL: L2 data RAM latency */
-		"mrc p15, 1, r1, c9, c0, 2\n"
-		"bic r1, r1, #(0x7<<0)\n"
-		"orr r1, r1, #(0x3<<0)\n"
-		"mcr p15, 1, r1, c9, c0, 2\n"
-
-		/* End of Cortex-A15 specific setup */
-		"not_a15:\n"
-
-		/* Get value of sunxi_mc_smp_first_comer */
-		"adr	r1, first\n"
-		"ldr	r0, [r1]\n"
-		"ldr	r0, [r1, r0]\n"
-
-		/* Skip cci_enable_port_for_self if not first comer */
-		"cmp	r0, #0\n"
-		"bxeq	lr\n"
-		"b	cci_enable_port_for_self\n"
-
-		".align 2\n"
-		"first: .word sunxi_mc_smp_first_comer - .\n"
-	);
-}
-
-static void __naked sunxi_mc_smp_secondary_startup(void)
-{
-	asm volatile(
-		"bl	sunxi_mc_smp_cluster_cache_enable\n"
-		"b	secondary_startup"
-		/* Let compiler know about sunxi_mc_smp_cluster_cache_enable */
-		:: "i" (sunxi_mc_smp_cluster_cache_enable)
-	);
-}
+int sunxi_mc_smp_first_comer;
 
 static DEFINE_SPINLOCK(boot_lock);
 
@@ -516,7 +514,10 @@ static int sunxi_cluster_powerdown(unsigned int cluster)
 	/* gate cluster power */
 	pr_debug("%s: gate cluster power\n", __func__);
 	reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
-	reg |= PRCM_PWROFF_GATING_REG_CLUSTER;
+	if (is_a83t)
+		reg |= PRCM_PWROFF_GATING_REG_CLUSTER_SUN8I;
+	else
+		reg |= PRCM_PWROFF_GATING_REG_CLUSTER_SUN9I;
 	writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
 	udelay(20);
 
@@ -598,8 +599,12 @@ out:
 	return !ret;
 }
 
-static bool sunxi_mc_smp_cpu_can_disable(unsigned int __unused)
+static bool sunxi_mc_smp_cpu_can_disable(unsigned int cpu)
 {
+	/* CPU0 hotplug not handled for sun8i-a83t */
+	if (is_a83t)
+		if (cpu == 0)
+			return false;
 	return true;
 }
 #endif
@@ -637,16 +642,6 @@ static bool __init sunxi_mc_smp_cpu_table_init(void)
  */
 typedef typeof(cpu_reset) phys_reset_t;
 
-static void __init __naked sunxi_mc_smp_resume(void)
-{
-	asm volatile(
-		"bl	sunxi_mc_smp_cluster_cache_enable\n"
-		"b	cpu_resume"
-		/* Let compiler know about sunxi_mc_smp_cluster_cache_enable */
-		:: "i" (sunxi_mc_smp_cluster_cache_enable)
-	);
-}
-
 static int __init nocache_trampoline(unsigned long __unused)
 {
 	phys_reset_t phys_reset;
@@ -692,12 +687,14 @@ struct sunxi_mc_smp_nodes {
 	struct device_node *prcm_node;
 	struct device_node *cpucfg_node;
 	struct device_node *sram_node;
+	struct device_node *r_cpucfg_node;
 };
 
 /* This structure holds SoC-specific bits tied to an enable-method string. */
 struct sunxi_mc_smp_data {
 	const char *enable_method;
 	int (*get_smp_nodes)(struct sunxi_mc_smp_nodes *nodes);
+	bool is_a83t;
 };
 
 static void __init sunxi_mc_smp_put_nodes(struct sunxi_mc_smp_nodes *nodes)
@@ -705,6 +702,7 @@ static void __init sunxi_mc_smp_put_nodes(struct sunxi_mc_smp_nodes *nodes)
 	of_node_put(nodes->prcm_node);
 	of_node_put(nodes->cpucfg_node);
 	of_node_put(nodes->sram_node);
+	of_node_put(nodes->r_cpucfg_node);
 	memset(nodes, 0, sizeof(*nodes));
 }
 
@@ -734,11 +732,42 @@ static int __init sun9i_a80_get_smp_nodes(struct sunxi_mc_smp_nodes *nodes)
 	return 0;
 }
 
+static int __init sun8i_a83t_get_smp_nodes(struct sunxi_mc_smp_nodes *nodes)
+{
+	nodes->prcm_node = of_find_compatible_node(NULL, NULL,
+						   "allwinner,sun8i-a83t-r-ccu");
+	if (!nodes->prcm_node) {
+		pr_err("%s: PRCM not available\n", __func__);
+		return -ENODEV;
+	}
+
+	nodes->cpucfg_node = of_find_compatible_node(NULL, NULL,
+						     "allwinner,sun8i-a83t-cpucfg");
+	if (!nodes->cpucfg_node) {
+		pr_err("%s: CPUCFG not available\n", __func__);
+		return -ENODEV;
+	}
+
+	nodes->r_cpucfg_node = of_find_compatible_node(NULL, NULL,
+						       "allwinner,sun8i-a83t-r-cpucfg");
+	if (!nodes->r_cpucfg_node) {
+		pr_err("%s: RCPUCFG not available\n", __func__);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static const struct sunxi_mc_smp_data sunxi_mc_smp_data[] __initconst = {
 	{
 		.enable_method	= "allwinner,sun9i-a80-smp",
 		.get_smp_nodes	= sun9i_a80_get_smp_nodes,
 	},
+	{
+		.enable_method	= "allwinner,sun8i-a83t-smp",
+		.get_smp_nodes	= sun8i_a83t_get_smp_nodes,
+		.is_a83t	= true,
+	},
 };
 
 static int __init sunxi_mc_smp_init(void)
@@ -746,6 +775,7 @@ static int __init sunxi_mc_smp_init(void)
 	struct sunxi_mc_smp_nodes nodes = { 0 };
 	struct device_node *node;
 	struct resource res;
+	void __iomem *addr;
 	int i, ret;
 
 	/*
@@ -771,6 +801,8 @@ static int __init sunxi_mc_smp_init(void)
 			break;
 	}
 
+	is_a83t = sunxi_mc_smp_data[i].is_a83t;
+
 	of_node_put(node);
 	if (ret)
 		return -ENODEV;
@@ -808,12 +840,23 @@ static int __init sunxi_mc_smp_init(void)
 		goto err_unmap_prcm;
 	}
 
-	sram_b_smp_base = of_io_request_and_map(nodes.sram_node, 0,
-						"sunxi-mc-smp");
-	if (IS_ERR(sram_b_smp_base)) {
-		ret = PTR_ERR(sram_b_smp_base);
-		pr_err("%s: failed to map secure SRAM\n", __func__);
-		goto err_unmap_release_cpucfg;
+	if (is_a83t) {
+		r_cpucfg_base = of_io_request_and_map(nodes.r_cpucfg_node,
+						      0, "sunxi-mc-smp");
+		if (IS_ERR(r_cpucfg_base)) {
+			ret = PTR_ERR(r_cpucfg_base);
+			pr_err("%s: failed to map R-CPUCFG registers\n",
+			       __func__);
+			goto err_unmap_release_cpucfg;
+		}
+	} else {
+		sram_b_smp_base = of_io_request_and_map(nodes.sram_node, 0,
+							"sunxi-mc-smp");
+		if (IS_ERR(sram_b_smp_base)) {
+			ret = PTR_ERR(sram_b_smp_base);
+			pr_err("%s: failed to map secure SRAM\n", __func__);
+			goto err_unmap_release_cpucfg;
+		}
 	}
 
 	/* Configure CCI-400 for boot cluster */
@@ -821,15 +864,18 @@ static int __init sunxi_mc_smp_init(void)
 	if (ret) {
 		pr_err("%s: failed to configure boot cluster: %d\n",
 		       __func__, ret);
-		goto err_unmap_release_secure_sram;
+		goto err_unmap_release_sram_rcpucfg;
 	}
 
 	/* We don't need the device nodes anymore */
 	sunxi_mc_smp_put_nodes(&nodes);
 
 	/* Set the hardware entry point address */
-	writel(__pa_symbol(sunxi_mc_smp_secondary_startup),
-	       prcm_base + PRCM_CPU_SOFT_ENTRY_REG);
+	if (is_a83t)
+		addr = r_cpucfg_base + R_CPUCFG_CPU_SOFT_ENTRY_REG;
+	else
+		addr = prcm_base + PRCM_CPU_SOFT_ENTRY_REG;
+	writel(__pa_symbol(sunxi_mc_smp_secondary_startup), addr);
 
 	/* Actually enable multi cluster SMP */
 	smp_set_ops(&sunxi_mc_smp_smp_ops);
@@ -838,9 +884,14 @@ static int __init sunxi_mc_smp_init(void)
 
 	return 0;
 
-err_unmap_release_secure_sram:
-	iounmap(sram_b_smp_base);
-	of_address_to_resource(nodes.sram_node, 0, &res);
+err_unmap_release_sram_rcpucfg:
+	if (is_a83t) {
+		iounmap(r_cpucfg_base);
+		of_address_to_resource(nodes.r_cpucfg_node, 0, &res);
+	} else {
+		iounmap(sram_b_smp_base);
+		of_address_to_resource(nodes.sram_node, 0, &res);
+	}
 	release_mem_region(res.start, resource_size(&res));
 err_unmap_release_cpucfg:
 	iounmap(cpucfg_base);
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 5e9602ce1573..de4b0e932f22 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
+#include <asm/secure_cntvoff.h>
 
 static const char * const sunxi_board_dt_compat[] = {
 	"allwinner,sun4i-a10",
@@ -62,7 +63,6 @@ MACHINE_END
 static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a23",
 	"allwinner,sun8i-a33",
-	"allwinner,sun8i-a83t",
 	"allwinner,sun8i-h2-plus",
 	"allwinner,sun8i-h3",
 	"allwinner,sun8i-r40",
@@ -75,6 +75,24 @@ DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family")
 	.dt_compat	= sun8i_board_dt_compat,
 MACHINE_END
 
+static void __init sun8i_a83t_cntvoff_init(void)
+{
+#ifdef CONFIG_SMP
+	secure_cntvoff_init();
+#endif
+}
+
+static const char * const sun8i_a83t_cntvoff_board_dt_compat[] = {
+	"allwinner,sun8i-a83t",
+	NULL,
+};
+
+DT_MACHINE_START(SUN8I_A83T_CNTVOFF_DT, "Allwinner A83t board")
+	.init_early	= sun8i_a83t_cntvoff_init,
+	.init_time	= sun6i_timer_init,
+	.dt_compat	= sun8i_a83t_cntvoff_board_dt_compat,
+MACHINE_END
+
 static const char * const sun9i_board_dt_compat[] = {
 	"allwinner,sun9i-a80",
 	NULL,
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 8bebe7da5ed9..c31f90a49481 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -6,10 +6,11 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
index ff8af52743ff..e5eae8bafc42 100644
--- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -146,5 +146,10 @@
 			regulator-max-microvolt = <3000000>;
 			regulator-name = "rtc-ldo";
 		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 2250dec9974c..0716b1441187 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -86,6 +86,10 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -155,6 +159,10 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };
@@ -167,6 +175,7 @@
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
 	};
 };
 
@@ -254,6 +263,11 @@
 	regulator-name = "vcc-wifi-io";
 };
 
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
 &reg_eldo1 {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
@@ -294,6 +308,13 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
new file mode 100644
index 000000000000..95e113ce8699
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-libretech-all-h3-cc.dtsi>
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H5";
+	compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index e237c05cfdb4..62d646baac3c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -47,7 +47,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			device_type = "cpu";
 			reg = <0>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index d36de5eb81f3..b6f2d6b2ecae 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -22,6 +22,16 @@
 	};
 };
 
+&r_i2c {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 56563150d61a..c72da8cd9ef5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -4,6 +4,8 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -115,7 +117,7 @@
 				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 26>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -134,8 +136,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 70>;
-			resets = <&ccu 21>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
@@ -145,8 +147,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 71>;
-			resets = <&ccu 22>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
 
@@ -156,8 +158,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 72>;
-			resets = <&ccu 23>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
 
@@ -167,9 +169,59 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 73>;
-			resets = <&ccu 24>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
 			status = "disabled";
 		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-h6-r-ccu";
+			reg = <0x07010000 0x400>;
+			clocks = <&osc24M>, <&osc32k>, <&iosc>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@7021000 {
+			compatible = "allwinner,sun50i-h6-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x07021000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-h6-r-pinctrl";
+			reg = <0x07022000 0x400>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu 2>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pins: r-i2c {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+		};
+
+		r_i2c: i2c@7081400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu 8>;
+			resets = <&r_ccu 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 };
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index de6d06ac790b..23a7fdcfc4e0 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -94,7 +94,7 @@ obj-$(CONFIG_ARCH_SPRD)			+= sprd/
 obj-$(CONFIG_ARCH_STI)			+= st/
 obj-$(CONFIG_ARCH_STRATIX10)		+= socfpga/
 obj-$(CONFIG_ARCH_SUNXI)		+= sunxi/
-obj-$(CONFIG_ARCH_SUNXI)		+= sunxi-ng/
+obj-$(CONFIG_SUNXI_CCU)			+= sunxi-ng/
 obj-$(CONFIG_ARCH_TEGRA)		+= tegra/
 obj-y					+= ti/
 obj-$(CONFIG_CLK_UNIPHIER)		+= uniphier/
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 79dfd296c3d1..826674d090fd 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -16,6 +16,11 @@ config SUN50I_H6_CCU
 	default ARM64 && ARCH_SUNXI
 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
+config SUN50I_H6_R_CCU
+	bool "Support for the Allwinner H6 PRCM CCU"
+	default ARM64 && ARCH_SUNXI
+	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+
 config SUN4I_A10_CCU
 	bool "Support for the Allwinner A10/A20 CCU"
 	default MACH_SUN4I
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 128a40ee5c5e..49454700f2e5 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -1,28 +1,29 @@
 # SPDX-License-Identifier: GPL-2.0
 # Common objects
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_common.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_mmc_timing.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_reset.o
+obj-y				+= ccu_common.o
+obj-y				+= ccu_mmc_timing.o
+obj-y				+= ccu_reset.o
 
 # Base clock types
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_div.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_frac.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_gate.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_mux.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_mult.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_phase.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_sdm.o
+obj-y				+= ccu_div.o
+obj-y				+= ccu_frac.o
+obj-y				+= ccu_gate.o
+obj-y				+= ccu_mux.o
+obj-y				+= ccu_mult.o
+obj-y				+= ccu_phase.o
+obj-y				+= ccu_sdm.o
 
 # Multi-factor clocks
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_nk.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_nkm.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_nkmp.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_nm.o
-lib-$(CONFIG_SUNXI_CCU)		+= ccu_mp.o
+obj-y				+= ccu_nk.o
+obj-y				+= ccu_nkm.o
+obj-y				+= ccu_nkmp.o
+obj-y				+= ccu_nm.o
+obj-y				+= ccu_mp.o
 
 # SoC support
 obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
 obj-$(CONFIG_SUN50I_H6_CCU)	+= ccu-sun50i-h6.o
+obj-$(CONFIG_SUN50I_H6_R_CCU)	+= ccu-sun50i-h6-r.o
 obj-$(CONFIG_SUN4I_A10_CCU)	+= ccu-sun4i-a10.o
 obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
 obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
@@ -37,12 +38,3 @@ obj-$(CONFIG_SUN8I_R40_CCU)	+= ccu-sun8i-r40.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80-de.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80-usb.o
-
-# The lib-y file goals is supposed to work only in arch/*/lib or lib/. In our
-# case, we want to use that goal, but even though lib.a will be properly
-# generated, it will not be linked in, eventually resulting in a linker error
-# for missing symbols.
-#
-# We can work around that by explicitly adding lib.a to the obj-y goal. This is
-# an undocumented behaviour, but works well for now.
-obj-$(CONFIG_SUNXI_CCU)		+= lib.a
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
new file mode 100644
index 000000000000..27554eaf6929
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-h6-r.h"
+
+/*
+ * Information about AR100 and AHB/APB clocks in R_CCU are gathered from
+ * clock definitions in the BSP source code.
+ */
+
+static const char * const ar100_r_apb2_parents[] = { "osc24M", "osc32k",
+					     "pll-periph0", "iosc" };
+static const struct ccu_mux_var_prediv ar100_r_apb2_predivs[] = {
+	{ .index = 2, .shift = 0, .width = 5 },
+};
+
+static struct ccu_div ar100_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 24,
+		.width	= 2,
+
+		.var_predivs	= ar100_r_apb2_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ar100_r_apb2_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x000,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ar100",
+						      ar100_r_apb2_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static CLK_FIXED_FACTOR(r_ahb_clk, "r-ahb", "ar100", 1, 1, 0);
+
+static struct ccu_div r_apb1_clk = {
+	.div		= _SUNXI_CCU_DIV(0, 2),
+
+	.common		= {
+		.reg		= 0x00c,
+		.hw.init	= CLK_HW_INIT("r-apb1",
+					      "r-ahb",
+					      &ccu_div_ops,
+					      0),
+	},
+};
+
+static struct ccu_div r_apb2_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 24,
+		.width	= 2,
+
+		.var_predivs	= ar100_r_apb2_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ar100_r_apb2_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x010,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("r-apb2",
+						      ar100_r_apb2_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+/*
+ * Information about the gate/resets are gathered from the clock header file
+ * in the BSP source code, although most of them are unused. The existence
+ * of the hardware block is verified with "3.1 Memory Mapping" chapter in
+ * "Allwinner H6 V200 User Manual V1.1"; and the parent APB buses are verified
+ * with "3.3.2.1 System Bus Tree" chapter inthe same document.
+ */
+static SUNXI_CCU_GATE(r_apb1_timer_clk,	"r-apb1-timer",	"r-apb1",
+		      0x11c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb1_twd_clk,	"r-apb1-twd",	"r-apb1",
+		      0x12c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb1_pwm_clk,	"r-apb1-pwm",	"r-apb1",
+		      0x13c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb2_uart_clk,	"r-apb2-uart",	"r-apb2",
+		      0x18c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb2_i2c_clk,	"r-apb2-i2c",	"r-apb2",
+		      0x19c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb1_ir_clk,	"r-apb1-ir",	"r-apb1",
+		      0x1cc, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb1_w1_clk,	"r-apb1-w1",	"r-apb1",
+		      0x1cc, BIT(0), 0);
+
+/* Information of IR(RX) mod clock is gathered from BSP source code */
+static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir",
+				  r_mod0_default_parents, 0x1c0,
+				  0, 5,		/* M */
+				  8, 2,		/* P */
+				  24, 1,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/*
+ * BSP didn't use the 1-wire function at all now, and the information about
+ * this mod clock is guessed from the IR mod clock above. The existence of
+ * this mod clock is proven by BSP clock header, and the dividers are verified
+ * by contents in the 1-wire related chapter of the User Manual.
+ */
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(w1_clk, "w1",
+				  r_mod0_default_parents, 0x1e0,
+				  0, 5,		/* M */
+				  8, 2,		/* P */
+				  24, 1,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static struct ccu_common *sun50i_h6_r_ccu_clks[] = {
+	&ar100_clk.common,
+	&r_apb1_clk.common,
+	&r_apb2_clk.common,
+	&r_apb1_timer_clk.common,
+	&r_apb1_twd_clk.common,
+	&r_apb1_pwm_clk.common,
+	&r_apb2_uart_clk.common,
+	&r_apb2_i2c_clk.common,
+	&r_apb1_ir_clk.common,
+	&r_apb1_w1_clk.common,
+	&ir_clk.common,
+	&w1_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = {
+	.hws	= {
+		[CLK_AR100]		= &ar100_clk.common.hw,
+		[CLK_R_AHB]		= &r_ahb_clk.hw,
+		[CLK_R_APB1]		= &r_apb1_clk.common.hw,
+		[CLK_R_APB2]		= &r_apb2_clk.common.hw,
+		[CLK_R_APB1_TIMER]	= &r_apb1_timer_clk.common.hw,
+		[CLK_R_APB1_TWD]	= &r_apb1_twd_clk.common.hw,
+		[CLK_R_APB1_PWM]	= &r_apb1_pwm_clk.common.hw,
+		[CLK_R_APB2_UART]	= &r_apb2_uart_clk.common.hw,
+		[CLK_R_APB2_I2C]	= &r_apb2_i2c_clk.common.hw,
+		[CLK_R_APB1_IR]		= &r_apb1_ir_clk.common.hw,
+		[CLK_R_APB1_W1]		= &r_apb1_w1_clk.common.hw,
+		[CLK_IR]		= &ir_clk.common.hw,
+		[CLK_W1]		= &w1_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = {
+	[RST_R_APB1_TIMER]	=  { 0x11c, BIT(16) },
+	[RST_R_APB1_TWD]	=  { 0x12c, BIT(16) },
+	[RST_R_APB1_PWM]	=  { 0x13c, BIT(16) },
+	[RST_R_APB2_UART]	=  { 0x18c, BIT(16) },
+	[RST_R_APB2_I2C]	=  { 0x19c, BIT(16) },
+	[RST_R_APB1_IR]		=  { 0x1cc, BIT(16) },
+	[RST_R_APB1_W1]		=  { 0x1ec, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = {
+	.ccu_clks	= sun50i_h6_r_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_h6_r_ccu_clks),
+
+	.hw_clks	= &sun50i_h6_r_hw_clks,
+
+	.resets		= sun50i_h6_r_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_h6_r_ccu_resets),
+};
+
+static void __init sunxi_r_ccu_init(struct device_node *node,
+				    const struct sunxi_ccu_desc *desc)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%pOF: Could not map the clock registers\n", node);
+		return;
+	}
+
+	sunxi_ccu_probe(node, reg, desc);
+}
+
+static void __init sun50i_h6_r_ccu_setup(struct device_node *node)
+{
+	sunxi_r_ccu_init(node, &sun50i_h6_r_ccu_desc);
+}
+CLK_OF_DECLARE(sun50i_h6_r_ccu, "allwinner,sun50i-h6-r-ccu",
+	       sun50i_h6_r_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
new file mode 100644
index 000000000000..782117dc0b28
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ */
+
+#ifndef _CCU_SUN50I_H6_R_H
+#define _CCU_SUN50I_H6_R_H
+
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+
+/* AHB/APB bus clocks are not exported except APB1 for R_PIO */
+#define CLK_R_AHB	1
+
+#define CLK_R_APB2	3
+
+#define CLK_NUMBER	(CLK_W1 + 1)
+
+#endif /* _CCU_SUN50I_H6_R_H */
diff --git a/include/dt-bindings/clock/sun50i-h6-r-ccu.h b/include/dt-bindings/clock/sun50i-h6-r-ccu.h
new file mode 100644
index 000000000000..76136132a13e
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-h6-r-ccu.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_
+#define _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_
+
+#define CLK_AR100		0
+
+#define CLK_R_APB1		2
+
+#define CLK_R_APB1_TIMER	4
+#define CLK_R_APB1_TWD		5
+#define CLK_R_APB1_PWM		6
+#define CLK_R_APB2_UART		7
+#define CLK_R_APB2_I2C		8
+#define CLK_R_APB1_IR		9
+#define CLK_R_APB1_W1		10
+
+#define CLK_IR			11
+#define CLK_W1			12
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun50i-h6-r-ccu.h b/include/dt-bindings/reset/sun50i-h6-r-ccu.h
new file mode 100644
index 000000000000..01c84dba49a4
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-h6-r-ccu.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_
+#define _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_
+
+#define RST_R_APB1_TIMER	0
+#define RST_R_APB1_TWD		1
+#define RST_R_APB1_PWM		2
+#define RST_R_APB2_UART		3
+#define RST_R_APB2_I2C		4
+#define RST_R_APB1_IR		5
+#define RST_R_APB1_W1		6
+
+#endif /* _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_ */