Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...

2 files changed, 217 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
new file mode 100644
index 000000000000..c2a3525ecb4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt
@@ -0,0 +1,162 @@
+* Clock bindings for Freescale i.MX25
+
+Required properties:
+- compatible: Should be "fsl,imx25-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX25
+clocks and IDs.
+
+	Clock			ID
+	---------------------------
+	dummy			0
+	osc			1
+	mpll			2
+	upll			3
+	mpll_cpu_3_4		4
+	cpu_sel			5
+	cpu			6
+	ahb			7
+	usb_div			8
+	ipg			9
+	per0_sel		10
+	per1_sel		11
+	per2_sel		12
+	per3_sel		13
+	per4_sel		14
+	per5_sel		15
+	per6_sel		16
+	per7_sel		17
+	per8_sel		18
+	per9_sel		19
+	per10_sel		20
+	per11_sel		21
+	per12_sel		22
+	per13_sel		23
+	per14_sel		24
+	per15_sel		25
+	per0			26
+	per1			27
+	per2			28
+	per3			29
+	per4			30
+	per5			31
+	per6			32
+	per7			33
+	per8			34
+	per9			35
+	per10			36
+	per11			37
+	per12			38
+	per13			39
+	per14			40
+	per15			41
+	csi_ipg_per		42
+	epit_ipg_per		43
+	esai_ipg_per		44
+	esdhc1_ipg_per		45
+	esdhc2_ipg_per		46
+	gpt_ipg_per		47
+	i2c_ipg_per		48
+	lcdc_ipg_per		49
+	nfc_ipg_per		50
+	owire_ipg_per		51
+	pwm_ipg_per		52
+	sim1_ipg_per		53
+	sim2_ipg_per		54
+	ssi1_ipg_per		55
+	ssi2_ipg_per		56
+	uart_ipg_per		57
+	ata_ahb			58
+	reserved		59
+	csi_ahb			60
+	emi_ahb			61
+	esai_ahb		62
+	esdhc1_ahb		63
+	esdhc2_ahb		64
+	fec_ahb			65
+	lcdc_ahb		66
+	rtic_ahb		67
+	sdma_ahb		68
+	slcdc_ahb		69
+	usbotg_ahb		70
+	reserved		71
+	reserved		72
+	reserved		73
+	reserved		74
+	can1_ipg		75
+	can2_ipg		76
+	csi_ipg			77
+	cspi1_ipg		78
+	cspi2_ipg		79
+	cspi3_ipg		80
+	dryice_ipg		81
+	ect_ipg			82
+	epit1_ipg		83
+	epit2_ipg		84
+	reserved		85
+	esdhc1_ipg		86
+	esdhc2_ipg		87
+	fec_ipg			88
+	reserved		89
+	reserved		90
+	reserved		91
+	gpt1_ipg		92
+	gpt2_ipg		93
+	gpt3_ipg		94
+	gpt4_ipg		95
+	reserved		96
+	reserved		97
+	reserved		98
+	iim_ipg			99
+	reserved		100
+	reserved		101
+	kpp_ipg			102
+	lcdc_ipg		103
+	reserved		104
+	pwm1_ipg		105
+	pwm2_ipg		106
+	pwm3_ipg		107
+	pwm4_ipg		108
+	rngb_ipg		109
+	reserved		110
+	scc_ipg			111
+	sdma_ipg		112
+	sim1_ipg		113
+	sim2_ipg		114
+	slcdc_ipg		115
+	spba_ipg		116
+	ssi1_ipg		117
+	ssi2_ipg		118
+	tsc_ipg			119
+	uart1_ipg		120
+	uart2_ipg		121
+	uart3_ipg		122
+	uart4_ipg		123
+	uart5_ipg		124
+	reserved		125
+	wdt_ipg			126
+
+Examples:
+
+clks: ccm@53f80000 {
+	compatible = "fsl,imx25-ccm";
+	reg = <0x53f80000 0x4000>;
+	interrupts = <31>;
+	clock-output-names = ...
+			"uart_ipg",
+			"uart_serial",
+			...;
+};
+
+uart1: serial@43f90000 {
+	compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+	reg = <0x43f90000 0x4000>;
+	interrupts = <45>;
+	clocks = <&clks 79>, <&clks 50>;
+	clock-names = "ipg", "per";
+	status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt
new file mode 100644
index 000000000000..23ae1db1bc13
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
@@ -0,0 +1,55 @@
+Device Tree Clock bindings for the Zynq 7000 EPP
+
+The Zynq EPP has several different clk providers, each with there own bindings.
+The purpose of this document is to document their usage.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+See Chapter 25 of Zynq TRM for more information about Zynq clocks.
+
+== PLLs ==
+
+Used to describe the ARM_PLL, DDR_PLL, and IO_PLL.
+
+Required properties:
+- #clock-cells : shall be 0 (only one clock is output from this node)
+- compatible : "xlnx,zynq-pll"
+- reg : pair of u32 values, which are the address offsets within the SLCR
+        of the relevant PLL_CTRL register and PLL_CFG register respectively
+- clocks : phandle for parent clock.  should be the phandle for ps_clk
+
+Optional properties:
+- clock-output-names : name of the output clock
+
+Example:
+	armpll: armpll {
+		#clock-cells = <0>;
+		compatible = "xlnx,zynq-pll";
+		clocks = <&ps_clk>;
+		reg = <0x100 0x110>;
+		clock-output-names = "armpll";
+	};
+
+== Peripheral clocks ==
+
+Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks.
+
+Required properties:
+- #clock-cells : shall be 1
+- compatible : "xlnx,zynq-periph-clock"
+- reg : a single u32 value, describing the offset within the SLCR where
+        the CLK_CTRL register is found for this peripheral
+- clocks : phandle for parent clocks.  should hold phandles for
+           the IO_PLL, ARM_PLL, and DDR_PLL in order
+- clock-output-names : names of the output clock(s).  For peripherals that have
+                       two output clocks (for example, the UART), two clocks
+                       should be listed.
+
+Example:
+	uart_clk: uart_clk {
+		#clock-cells = <1>;
+		compatible = "xlnx,zynq-periph-clock";
+		clocks = <&iopll &armpll &ddrpll>;
+		reg = <0x154>;
+		clock-output-names = "uart0_ref_clk",
+				     "uart1_ref_clk";
+	};