Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in this update:

   - perf updates from Will Deacon:

     The main changes are callchain stability fixes from Jean Pihet and
     event mapping and PMU name rework from Mark Rutland

     The latter is preparatory work for enabling some code re-use with
     arm64 in the future.

   - updates for nommu from Uwe Kleine-König:

     Two different fixes for the same problem making some ARM nommu
     configurations not boot since 3.6-rc1.  The problem is that
     user_addr_max returned the biggest available RAM address which
     makes some copy_from_user variants fail to read from XIP memory.

   - deprecate legacy OMAP DMA API, in preparation for it's removal.

     The popular drivers have been converted over, leaving a very small
     number of rarely used drivers, which hopefully can be converted
     during the next cycle with a bit more visibility (and hopefully
     people popping out of the woodwork to help test)

   - more tweaks for BE systems, particularly with the kernel image
     format.  In connection with this, I've cleaned up the way we
     generate the linker script for the decompressor.

   - removal of hard-coded assumptions of the kernel stack size, making
     everywhere depend on the value of THREAD_SIZE_ORDER.

   - MCPM updates from Nicolas Pitre.

   - Make it easier for proper CPU part number checks (which should
     always include the vendor field).

   - Assembly code optimisation - use the "bx" instruction when
     returning from a function on ARMv6+ rather than "mov pc, reg".

   - Save the last kernel misaligned fault location and report it via
     the procfs alignment file.

   - Clean up the way we create the initial stack frame, which is a
     repeated pattern in several different locations.

   - Support for 8-byte get_user(), needed for some DRM implementations.

   - mcs locking from Will Deacon.

   - Save and restore a few more Cortex-A9 registers (for errata
     workarounds)

   - Fix various aspects of the SWP emulation, and the ELF hwcap for the
     SWP instruction.

   - Update LPAE logic for pte_write and pmd_write to make it more
     correct.

   - Support for Broadcom Brahma15 CPU cores.

   - ARM assembly crypto updates from Ard Biesheuvel"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (53 commits)
  ARM: add comments to the early page table remap code
  ARM: 8122/1: smp_scu: enable SCU standby support
  ARM: 8121/1: smp_scu: use macro for SCU enable bit
  ARM: 8120/1: crypto: sha512: add ARM NEON implementation
  ARM: 8119/1: crypto: sha1: add ARM NEON implementation
  ARM: 8118/1: crypto: sha1/make use of common SHA-1 structures
  ARM: 8113/1: remove remaining definitions of PLAT_PHYS_OFFSET from <mach/memory.h>
  ARM: 8111/1: Enable erratum 798181 for Broadcom Brahma-B15
  ARM: 8110/1: do CPU-specific init for Broadcom Brahma15 cores
  ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE
  ARM: 8108/1: mm: Introduce {pte,pmd}_isset and {pte,pmd}_isclear
  ARM: hwcap: disable HWCAP_SWP if the CPU advertises it has exclusives
  ARM: SWP emulation: only initialise on ARMv7 CPUs
  ARM: SWP emulation: always enable when SMP is enabled
  ARM: 8103/1: save/restore Cortex-A9 CP15 registers on suspend/resume
  ARM: 8098/1: mcs lock: implement wfe-based polling for MCS locking
  ARM: 8091/2: add get_user() support for 8 byte types
  ARM: 8097/1: unistd.h: relocate comments back to place
  ARM: 8096/1: Describe required sort order for textofs-y (TEXT_OFFSET)
  ARM: 8090/1: add revision info for PL310 errata 588369 and 727915
  ...

1 files changed, 8 insertions, 8 deletions

diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index c45319c8f1d9..8008a0461cf5 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -38,7 +38,7 @@
 ENTRY(cpu_sa110_proc_init)
 	mov	r0, #0
 	mcr	p15, 0, r0, c15, c1, 2		@ Enable clock switching
-	mov	pc, lr
+	ret	lr
 
 /*
  * cpu_sa110_proc_fin()
@@ -50,7 +50,7 @@ ENTRY(cpu_sa110_proc_fin)
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
+	ret	lr
 
 /*
  * cpu_sa110_reset(loc)
@@ -74,7 +74,7 @@ ENTRY(cpu_sa110_reset)
 	bic	ip, ip, #0x000f			@ ............wcam
 	bic	ip, ip, #0x1100			@ ...i...s........
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
+	ret	r0
 ENDPROC(cpu_sa110_reset)
 	.popsection
 
@@ -103,7 +103,7 @@ ENTRY(cpu_sa110_do_idle)
 	mov	r0, r0				@ safety
 	mov	r0, r0				@ safety
 	mcr	p15, 0, r0, c15, c1, 2		@ enable clock switching
-	mov	pc, lr
+	ret	lr
 
 /* ================================= CACHE ================================ */
 
@@ -121,7 +121,7 @@ ENTRY(cpu_sa110_dcache_clean_area)
 	add	r0, r0, #DCACHELINESIZE
 	subs	r1, r1, #DCACHELINESIZE
 	bhi	1b
-	mov	pc, lr
+	ret	lr
 
 /* =============================== PageTable ============================== */
 
@@ -141,7 +141,7 @@ ENTRY(cpu_sa110_switch_mm)
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
 	ldr	pc, [sp], #4
 #else
-	mov	pc, lr
+	ret	lr
 #endif
 
 /*
@@ -157,7 +157,7 @@ ENTRY(cpu_sa110_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 #endif
-	mov	pc, lr
+	ret	lr
 
 	.type	__sa110_setup, #function
 __sa110_setup:
@@ -173,7 +173,7 @@ __sa110_setup:
 	mrc	p15, 0, r0, c1, c0		@ get control register v4
 	bic	r0, r0, r5
 	orr	r0, r0, r6
-	mov	pc, lr
+	ret	lr
 	.size	__sa110_setup, . - __sa110_setup
 
 	/*