diff options
| author | Manuel Lauss <manuel.lauss@googlemail.com> | 2011-11-10 12:06:21 +0000 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2011-12-07 22:02:06 +0000 |
| commit | 7c4b24da07d99b5473de7cc7ba3f67d85b889bc0 (patch) | |
| tree | ec1369de73ee0e682c07377b933706600a6725ff /arch/mips/alchemy/devboards/pb1100/board_setup.c | |
| parent | 8e026910fcd46c3cfcdf5cff7ebba013bb8ec85c (diff) | |
| download | linux-next-7c4b24da07d99b5473de7cc7ba3f67d85b889bc0.tar.gz | |
MIPS: Alchemy: merge devboard code into single per-board files.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2884/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/alchemy/devboards/pb1100/board_setup.c')
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1100/board_setup.c | 127 |
1 files changed, 0 insertions, 127 deletions
diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c deleted file mode 100644 index d108fd573aaf..000000000000 --- a/arch/mips/alchemy/devboards/pb1100/board_setup.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * Copyright 2002, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/interrupt.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-db1x00/bcsr.h> - -#include <prom.h> - - -const char *get_system_type(void) -{ - return "Alchemy Pb1100"; -} - -void __init board_setup(void) -{ - volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; - - bcsr_init(DB1000_BCSR_PHYS_ADDR, - DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); - - /* Set AUX clock to 12 MHz * 8 = 96 MHz */ - au_writel(8, SYS_AUXPLL); - alchemy_gpio1_input_enable(); - udelay(100); - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - { - u32 pin_func, sys_freqctrl, sys_clksrc; - - /* Configure pins GPIO[14:9] as GPIO */ - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; - - /* Zero and disable FREQ2 */ - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* Zero and disable USBH/USBD/IrDA clock */ - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); - au_writel(sys_clksrc, SYS_CLKSRC); - - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); - - /* FREQ2 = aux / 2 = 48 MHz */ - sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | - SYS_FC_FE2 | SYS_FC_FS2; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* - * Route 48 MHz FREQ2 into USBH/USBD/IrDA - */ - sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT; - au_writel(sys_clksrc, SYS_CLKSRC); - - /* Setup the static bus controller */ - au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ - au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ - au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ - - /* - * Get USB Functionality pin state (device vs host drive pins). - */ - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB; - /* 2nd USB port is USB host. */ - pin_func |= SYS_PF_USB; - au_writel(pin_func, SYS_PINFUNC); - } -#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ - - /* Enable sys bus clock divider when IDLE state or no bus activity. */ - au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); - - /* Enable the RTC if not already enabled. */ - if (!(readb(base + 0x28) & 0x20)) { - writeb(readb(base + 0x28) | 0x20, base + 0x28); - au_sync(); - } - /* Put the clock in BCD mode. */ - if (readb(base + 0x2C) & 0x4) { /* reg B */ - writeb(readb(base + 0x2c) & ~0x4, base + 0x2c); - au_sync(); - } -} - -static int __init pb1100_init_irq(void) -{ - irq_set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */ - irq_set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */ - irq_set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */ - irq_set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */ - - return 0; -} -arch_initcall(pb1100_init_irq); |