Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "The timer and timekeeping departement delivers:

  Core:

   - The consolidation of the VDSO code into a generic library including
     the conversion of x86 and ARM64. Conversion of ARM and MIPS are en
     route through the relevant maintainer trees and should end up in
     5.4.

     This gets rid of the unnecessary different copies of the same code
     and brings all architectures on the same level of VDSO
     functionality.

   - Make the NTP user space interface more robust by restricting the
     TAI offset to prevent undefined behaviour. Includes a selftest.

   - Validate user input in the compat settimeofday() syscall to catch
     invalid values which would be turned into valid values by a
     multiplication overflow

   - Consolidate the time accessors

   - Small fixes, improvements and cleanups all over the place

  Drivers:

   - Support for the NXP system counter, TI davinci timer

   - Move the Microsoft HyperV clocksource/events code into the
     drivers/clocksource directory so it can be shared between x86 and
     ARM64.

   - Overhaul of the Tegra driver

   - Delay timer support for IXP4xx

   - Small fixes, improvements and cleanups as usual"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  time: Validate user input in compat_settimeofday()
  timer: Document TIMER_PINNED
  clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic
  clocksource/drivers: Make Hyper-V clocksource ISA agnostic
  MAINTAINERS: Fix Andy's surname and the directory entries of VDSO
  hrtimer: Use a bullet for the returns bullet list
  arm64: vdso: Fix compilation with clang older than 8
  arm64: compat: Fix __arch_get_hw_counter() implementation
  arm64: Fix __arch_get_hw_counter() implementation
  lib/vdso: Make delta calculation work correctly
  MAINTAINERS: Add entry for the generic VDSO library
  arm64: compat: No need for pre-ARMv7 barriers on an ARMv8 system
  arm64: vdso: Remove unnecessary asm-offsets.c definitions
  vdso: Remove superfluous #ifdef __KERNEL__ in vdso/datapage.h
  clocksource/drivers/davinci: Add support for clocksource
  clocksource/drivers/davinci: Add support for clockevents
  clocksource/drivers/tegra: Set up maximum-ticks limit properly
  clocksource/drivers/tegra: Cycles can't be 0
  clocksource/drivers/tegra: Restore base address before cleanup
  clocksource/drivers/tegra: Add verbose definition for 1MHz constant
  ...

1 files changed, 3 insertions, 88 deletions

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 1608050e9df9..0e033ef11a9f 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -17,64 +17,13 @@
 #include <linux/version.h>
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
-#include <linux/clockchips.h>
 #include <linux/hyperv.h>
 #include <linux/slab.h>
 #include <linux/cpuhotplug.h>
-
-#ifdef CONFIG_HYPERV_TSCPAGE
-
-static struct ms_hyperv_tsc_page *tsc_pg;
-
-struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
-{
-	return tsc_pg;
-}
-EXPORT_SYMBOL_GPL(hv_get_tsc_page);
-
-static u64 read_hv_clock_tsc(struct clocksource *arg)
-{
-	u64 current_tick = hv_read_tsc_page(tsc_pg);
-
-	if (current_tick == U64_MAX)
-		rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
-
-	return current_tick;
-}
-
-static struct clocksource hyperv_cs_tsc = {
-		.name		= "hyperv_clocksource_tsc_page",
-		.rating		= 400,
-		.read		= read_hv_clock_tsc,
-		.mask		= CLOCKSOURCE_MASK(64),
-		.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-#endif
-
-static u64 read_hv_clock_msr(struct clocksource *arg)
-{
-	u64 current_tick;
-	/*
-	 * Read the partition counter to get the current tick count. This count
-	 * is set to 0 when the partition is created and is incremented in
-	 * 100 nanosecond units.
-	 */
-	rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
-	return current_tick;
-}
-
-static struct clocksource hyperv_cs_msr = {
-	.name		= "hyperv_clocksource_msr",
-	.rating		= 400,
-	.read		= read_hv_clock_msr,
-	.mask		= CLOCKSOURCE_MASK(64),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
+#include <clocksource/hyperv_timer.h>
 
 void *hv_hypercall_pg;
 EXPORT_SYMBOL_GPL(hv_hypercall_pg);
-struct clocksource *hyperv_cs;
-EXPORT_SYMBOL_GPL(hyperv_cs);
 
 u32 *hv_vp_index;
 EXPORT_SYMBOL_GPL(hv_vp_index);
@@ -343,42 +292,8 @@ void __init hyperv_init(void)
 
 	x86_init.pci.arch_init = hv_pci_init;
 
-	/*
-	 * Register Hyper-V specific clocksource.
-	 */
-#ifdef CONFIG_HYPERV_TSCPAGE
-	if (ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE) {
-		union hv_x64_msr_hypercall_contents tsc_msr;
-
-		tsc_pg = __vmalloc(PAGE_SIZE, GFP_KERNEL, PAGE_KERNEL);
-		if (!tsc_pg)
-			goto register_msr_cs;
-
-		hyperv_cs = &hyperv_cs_tsc;
-
-		rdmsrl(HV_X64_MSR_REFERENCE_TSC, tsc_msr.as_uint64);
-
-		tsc_msr.enable = 1;
-		tsc_msr.guest_physical_address = vmalloc_to_pfn(tsc_pg);
-
-		wrmsrl(HV_X64_MSR_REFERENCE_TSC, tsc_msr.as_uint64);
-
-		hyperv_cs_tsc.archdata.vclock_mode = VCLOCK_HVCLOCK;
-
-		clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
-		return;
-	}
-register_msr_cs:
-#endif
-	/*
-	 * For 32 bit guests just use the MSR based mechanism for reading
-	 * the partition counter.
-	 */
-
-	hyperv_cs = &hyperv_cs_msr;
-	if (ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE)
-		clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
-
+	/* Register Hyper-V specific clocksource */
+	hv_init_clocksource();
 	return;
 
 remove_cpuhp_state: