Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.6:

UAPI Changes:
- Add support for DMA-BUF HEAPS.

Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.

Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.

Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com

17 files changed, 1778 insertions, 871 deletions

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 34362976cd6f..ccc698c44f58 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -16,16 +16,6 @@ config DRM_PANEL_BRIDGE
 menu "Display Interface Bridges"
 	depends on DRM && DRM_BRIDGE
 
-config DRM_ANALOGIX_ANX78XX
-	tristate "Analogix ANX78XX bridge"
-	select DRM_KMS_HELPER
-	select REGMAP_I2C
-	---help---
-	  ANX78XX is an ultra-low power Full-HD SlimPort transmitter
-	  designed for portable devices. The ANX78XX transforms
-	  the HDMI output of an application processor to MyDP
-	  or DisplayPort.
-
 config DRM_CDNS_DSI
 	tristate "Cadence DPI/DSI bridge"
 	select DRM_KMS_HELPER
@@ -60,10 +50,10 @@ config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
 	select DRM_KMS_HELPER
 	select DRM_PANEL
 	---help---
-          This is a driver for the display bridges of
-          GE B850v3 that convert dual channel LVDS
-          to DP++. This is used with the i.MX6 imx-ldb
-          driver. You are likely to say N here.
+	  This is a driver for the display bridges of
+	  GE B850v3 that convert dual channel LVDS
+	  to DP++. This is used with the i.MX6 imx-ldb
+	  driver. You are likely to say N here.
 
 config DRM_NXP_PTN3460
 	tristate "NXP PTN3460 DP/LVDS bridge"
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 4934fcf5a6f8..a6c7dd7727ea 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
 obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
 obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o
 obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o
@@ -12,8 +11,9 @@ obj-$(CONFIG_DRM_SII9234) += sii9234.o
 obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
 obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o
 obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
-obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
 obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
 obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o
 obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
+
+obj-y += analogix/
 obj-y += synopsys/
diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix-anx78xx.h
deleted file mode 100644
index 55d6c2109740..000000000000
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.h
+++ /dev/null
@@ -1,703 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
- */
-
-#ifndef __ANX78xx_H
-#define __ANX78xx_H
-
-/***************************************************************/
-/* Register definitions for RX_PO                              */
-/***************************************************************/
-
-/*
- * System Control and Status
- */
-
-/* Software Reset Register 1 */
-#define SP_SOFTWARE_RESET1_REG		0x11
-#define SP_VIDEO_RST			BIT(4)
-#define SP_HDCP_MAN_RST			BIT(2)
-#define SP_TMDS_RST			BIT(1)
-#define SP_SW_MAN_RST			BIT(0)
-
-/* System Status Register */
-#define SP_SYSTEM_STATUS_REG		0x14
-#define SP_TMDS_CLOCK_DET		BIT(1)
-#define SP_TMDS_DE_DET			BIT(0)
-
-/* HDMI Status Register */
-#define SP_HDMI_STATUS_REG		0x15
-#define SP_HDMI_AUD_LAYOUT		BIT(3)
-#define SP_HDMI_DET			BIT(0)
-#  define SP_DVI_MODE			0
-#  define SP_HDMI_MODE			1
-
-/* HDMI Mute Control Register */
-#define SP_HDMI_MUTE_CTRL_REG		0x16
-#define SP_AUD_MUTE			BIT(1)
-#define SP_VID_MUTE			BIT(0)
-
-/* System Power Down Register 1 */
-#define SP_SYSTEM_POWER_DOWN1_REG	0x18
-#define SP_PWDN_CTRL			BIT(0)
-
-/*
- * Audio and Video Auto Control
- */
-
-/* Auto Audio and Video Control register */
-#define SP_AUDVID_CTRL_REG		0x20
-#define SP_AVC_OE			BIT(7)
-#define SP_AAC_OE			BIT(6)
-#define SP_AVC_EN			BIT(1)
-#define SP_AAC_EN			BIT(0)
-
-/* Audio Exception Enable Registers */
-#define SP_AUD_EXCEPTION_ENABLE_BASE	(0x24 - 1)
-/* Bits for Audio Exception Enable Register 3 */
-#define SP_AEC_EN21			BIT(5)
-
-/*
- * Interrupt
- */
-
-/* Interrupt Status Register 1 */
-#define SP_INT_STATUS1_REG		0x31
-/* Bits for Interrupt Status Register 1 */
-#define SP_HDMI_DVI			BIT(7)
-#define SP_CKDT_CHG			BIT(6)
-#define SP_SCDT_CHG			BIT(5)
-#define SP_PCLK_CHG			BIT(4)
-#define SP_PLL_UNLOCK			BIT(3)
-#define SP_CABLE_PLUG_CHG		BIT(2)
-#define SP_SET_MUTE			BIT(1)
-#define SP_SW_INTR			BIT(0)
-/* Bits for Interrupt Status Register 2 */
-#define SP_HDCP_ERR			BIT(5)
-#define SP_AUDIO_SAMPLE_CHG		BIT(0)	/* undocumented */
-/* Bits for Interrupt Status Register 3 */
-#define SP_AUD_MODE_CHG			BIT(0)
-/* Bits for Interrupt Status Register 5 */
-#define SP_AUDIO_RCV			BIT(0)
-/* Bits for Interrupt Status Register 6 */
-#define SP_INT_STATUS6_REG		0x36
-#define SP_CTS_RCV			BIT(7)
-#define SP_NEW_AUD_PKT			BIT(4)
-#define SP_NEW_AVI_PKT			BIT(1)
-#define SP_NEW_CP_PKT			BIT(0)
-/* Bits for Interrupt Status Register 7 */
-#define SP_NO_VSI			BIT(7)
-#define SP_NEW_VS			BIT(4)
-
-/* Interrupt Mask 1 Status Registers */
-#define SP_INT_MASK1_REG		0x41
-
-/* HDMI US TIMER Control Register */
-#define SP_HDMI_US_TIMER_CTRL_REG	0x49
-#define SP_MS_TIMER_MARGIN_10_8_MASK	0x07
-
-/*
- * TMDS Control
- */
-
-/* TMDS Control Registers */
-#define SP_TMDS_CTRL_BASE		(0x50 - 1)
-/* Bits for TMDS Control Register 7 */
-#define SP_PD_RT			BIT(0)
-
-/*
- * Video Control
- */
-
-/* Video Status Register */
-#define SP_VIDEO_STATUS_REG		0x70
-#define SP_COLOR_DEPTH_MASK		0xf0
-#define SP_COLOR_DEPTH_SHIFT		4
-#  define SP_COLOR_DEPTH_MODE_LEGACY	0x00
-#  define SP_COLOR_DEPTH_MODE_24BIT	0x04
-#  define SP_COLOR_DEPTH_MODE_30BIT	0x05
-#  define SP_COLOR_DEPTH_MODE_36BIT	0x06
-#  define SP_COLOR_DEPTH_MODE_48BIT	0x07
-
-/* Video Data Range Control Register */
-#define SP_VID_DATA_RANGE_CTRL_REG	0x83
-#define SP_R2Y_INPUT_LIMIT		BIT(1)
-
-/* Pixel Clock High Resolution Counter Registers */
-#define SP_PCLK_HIGHRES_CNT_BASE	(0x8c - 1)
-
-/*
- * Audio Control
- */
-
-/* Number of Audio Channels Status Registers */
-#define SP_AUD_CH_STATUS_REG_NUM	6
-
-/* Audio IN S/PDIF Channel Status Registers */
-#define SP_AUD_SPDIF_CH_STATUS_BASE	0xc7
-
-/* Audio IN S/PDIF Channel Status Register 4 */
-#define SP_FS_FREQ_MASK			0x0f
-#  define SP_FS_FREQ_44100HZ		0x00
-#  define SP_FS_FREQ_48000HZ		0x02
-#  define SP_FS_FREQ_32000HZ		0x03
-#  define SP_FS_FREQ_88200HZ		0x08
-#  define SP_FS_FREQ_96000HZ		0x0a
-#  define SP_FS_FREQ_176400HZ		0x0c
-#  define SP_FS_FREQ_192000HZ		0x0e
-
-/*
- * Micellaneous Control Block
- */
-
-/* CHIP Control Register */
-#define SP_CHIP_CTRL_REG		0xe3
-#define SP_MAN_HDMI5V_DET		BIT(3)
-#define SP_PLLLOCK_CKDT_EN		BIT(2)
-#define SP_ANALOG_CKDT_EN		BIT(1)
-#define SP_DIGITAL_CKDT_EN		BIT(0)
-
-/* Packet Receiving Status Register */
-#define SP_PACKET_RECEIVING_STATUS_REG	0xf3
-#define SP_AVI_RCVD			BIT(5)
-#define SP_VSI_RCVD			BIT(1)
-
-/***************************************************************/
-/* Register definitions for RX_P1                              */
-/***************************************************************/
-
-/* HDCP BCAPS Shadow Register */
-#define SP_HDCP_BCAPS_SHADOW_REG	0x2a
-#define SP_BCAPS_REPEATER		BIT(5)
-
-/* HDCP Status Register */
-#define SP_RX_HDCP_STATUS_REG		0x3f
-#define SP_AUTH_EN			BIT(4)
-
-/*
- * InfoFrame and Control Packet Registers
- */
-
-/* AVI InfoFrame packet checksum */
-#define SP_AVI_INFOFRAME_CHECKSUM	0xa3
-
-/* AVI InfoFrame Registers */
-#define SP_AVI_INFOFRAME_DATA_BASE	0xa4
-
-#define SP_AVI_COLOR_F_MASK		0x60
-#define SP_AVI_COLOR_F_SHIFT		5
-
-/* Audio InfoFrame Registers */
-#define SP_AUD_INFOFRAME_DATA_BASE	0xc4
-#define SP_AUD_INFOFRAME_LAYOUT_MASK	0x0f
-
-/* MPEG/HDMI Vendor Specific InfoFrame Packet type code */
-#define SP_MPEG_VS_INFOFRAME_TYPE_REG	0xe0
-
-/* MPEG/HDMI Vendor Specific InfoFrame Packet length */
-#define SP_MPEG_VS_INFOFRAME_LEN_REG	0xe2
-
-/* MPEG/HDMI Vendor Specific InfoFrame Packet version number */
-#define SP_MPEG_VS_INFOFRAME_VER_REG	0xe1
-
-/* MPEG/HDMI Vendor Specific InfoFrame Packet content */
-#define SP_MPEG_VS_INFOFRAME_DATA_BASE	0xe4
-
-/* General Control Packet Register */
-#define SP_GENERAL_CTRL_PACKET_REG	0x9f
-#define SP_CLEAR_AVMUTE			BIT(4)
-#define SP_SET_AVMUTE			BIT(0)
-
-/***************************************************************/
-/* Register definitions for TX_P0                              */
-/***************************************************************/
-
-/* HDCP Status Register */
-#define SP_TX_HDCP_STATUS_REG		0x00
-#define SP_AUTH_FAIL			BIT(5)
-#define SP_AUTHEN_PASS			BIT(1)
-
-/* HDCP Control Register 0 */
-#define SP_HDCP_CTRL0_REG		0x01
-#define SP_RX_REPEATER			BIT(6)
-#define SP_RE_AUTH			BIT(5)
-#define SP_SW_AUTH_OK			BIT(4)
-#define SP_HARD_AUTH_EN			BIT(3)
-#define SP_HDCP_ENC_EN			BIT(2)
-#define SP_BKSV_SRM_PASS		BIT(1)
-#define SP_KSVLIST_VLD			BIT(0)
-/* HDCP Function Enabled */
-#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
-
-/* HDCP Receiver BSTATUS Register 0 */
-#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
-/* HDCP Receiver BSTATUS Register 1 */
-#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
-
-/* HDCP Embedded "Blue Screen" Content Registers */
-#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
-#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
-#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
-
-/* HDCP Wait R0 Timing Register */
-#define SP_HDCP_WAIT_R0_TIME_REG	0x40
-
-/* HDCP Link Integrity Check Timer Register */
-#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
-
-/* HDCP Repeater Ready Wait Timer Register */
-#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
-
-/* HDCP Auto Timer Register */
-#define SP_HDCP_AUTO_TIMER_REG		0x51
-
-/* HDCP Key Status Register */
-#define SP_HDCP_KEY_STATUS_REG		0x5e
-
-/* HDCP Key Command Register */
-#define SP_HDCP_KEY_COMMAND_REG		0x5f
-#define SP_DISABLE_SYNC_HDCP		BIT(2)
-
-/* OTP Memory Key Protection Registers */
-#define SP_OTP_KEY_PROTECT1_REG		0x60
-#define SP_OTP_KEY_PROTECT2_REG		0x61
-#define SP_OTP_KEY_PROTECT3_REG		0x62
-#define SP_OTP_PSW1			0xa2
-#define SP_OTP_PSW2			0x7e
-#define SP_OTP_PSW3			0xc6
-
-/* DP System Control Registers */
-#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
-/* Bits for DP System Control Register 2 */
-#define SP_CHA_STA			BIT(2)
-/* Bits for DP System Control Register 3 */
-#define SP_HPD_STATUS			BIT(6)
-#define SP_STRM_VALID			BIT(2)
-/* Bits for DP System Control Register 4 */
-#define SP_ENHANCED_MODE		BIT(3)
-
-/* DP Video Control Register */
-#define SP_DP_VIDEO_CTRL_REG		0x84
-#define SP_COLOR_F_MASK			0x06
-#define SP_COLOR_F_SHIFT		1
-#define SP_BPC_MASK			0xe0
-#define SP_BPC_SHIFT			5
-#  define SP_BPC_6BITS			0x00
-#  define SP_BPC_8BITS			0x01
-#  define SP_BPC_10BITS			0x02
-#  define SP_BPC_12BITS			0x03
-
-/* DP Audio Control Register */
-#define SP_DP_AUDIO_CTRL_REG		0x87
-#define SP_AUD_EN			BIT(0)
-
-/* 10us Pulse Generate Timer Registers */
-#define SP_I2C_GEN_10US_TIMER0_REG	0x88
-#define SP_I2C_GEN_10US_TIMER1_REG	0x89
-
-/* Packet Send Control Register */
-#define SP_PACKET_SEND_CTRL_REG		0x90
-#define SP_AUD_IF_UP			BIT(7)
-#define SP_AVI_IF_UD			BIT(6)
-#define SP_MPEG_IF_UD			BIT(5)
-#define SP_SPD_IF_UD			BIT(4)
-#define SP_AUD_IF_EN			BIT(3)
-#define SP_AVI_IF_EN			BIT(2)
-#define SP_MPEG_IF_EN			BIT(1)
-#define SP_SPD_IF_EN			BIT(0)
-
-/* DP HDCP Control Register */
-#define SP_DP_HDCP_CTRL_REG		0x92
-#define SP_AUTO_EN			BIT(7)
-#define SP_AUTO_START			BIT(5)
-#define SP_LINK_POLLING			BIT(1)
-
-/* DP Main Link Bandwidth Setting Register */
-#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
-#define SP_LINK_BW_SET_MASK		0x1f
-#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
-
-/* DP Training Pattern Set Register */
-#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
-
-/* DP Lane 0 Link Training Control Register */
-#define SP_DP_LANE0_LT_CTRL_REG		0xa3
-#define SP_TX_SW_SET_MASK		0x1b
-#define SP_MAX_PRE_REACH		BIT(5)
-#define SP_MAX_DRIVE_REACH		BIT(4)
-#define SP_PRE_EMP_LEVEL1		BIT(3)
-#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
-
-/* DP Link Training Control Register */
-#define SP_DP_LT_CTRL_REG		0xa8
-#define SP_LT_ERROR_TYPE_MASK		0x70
-#  define SP_LT_NO_ERROR		0x00
-#  define SP_LT_AUX_WRITE_ERROR		0x01
-#  define SP_LT_MAX_DRIVE_REACHED	0x02
-#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
-#  define SP_LT_LOOP_SAME_5_TIME	0x04
-#  define SP_LT_CR_FAIL_IN_EQ		0x05
-#  define SP_LT_EQ_LOOP_5_TIME		0x06
-#define SP_LT_EN			BIT(0)
-
-/* DP CEP Training Control Registers */
-#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
-#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
-
-/* DP Debug Register 1 */
-#define SP_DP_DEBUG1_REG		0xb0
-#define SP_DEBUG_PLL_LOCK		BIT(4)
-#define SP_POLLING_EN			BIT(1)
-
-/* DP Polling Control Register */
-#define SP_DP_POLLING_CTRL_REG		0xb4
-#define SP_AUTO_POLLING_DISABLE		BIT(0)
-
-/* DP Link Debug Control Register */
-#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
-#define SP_M_VID_DEBUG			BIT(5)
-#define SP_NEW_PRBS7			BIT(4)
-#define SP_INSERT_ER			BIT(1)
-#define SP_PRBS31_EN			BIT(0)
-
-/* AUX Misc control Register */
-#define SP_AUX_MISC_CTRL_REG		0xbf
-
-/* DP PLL control Register */
-#define SP_DP_PLL_CTRL_REG		0xc7
-#define SP_PLL_RST			BIT(6)
-
-/* DP Analog Power Down Register */
-#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
-#define SP_CH0_PD			BIT(0)
-
-/* DP Misc Control Register */
-#define SP_DP_MISC_CTRL_REG		0xcd
-#define SP_EQ_TRAINING_LOOP		BIT(6)
-
-/* DP Extra I2C Device Address Register */
-#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
-#define SP_I2C_STRETCH_DISABLE		BIT(7)
-
-#define SP_I2C_EXTRA_ADDR		0x50
-
-/* DP Downspread Control Register 1 */
-#define SP_DP_DOWNSPREAD_CTRL1_REG	0xd0
-
-/* DP M Value Calculation Control Register */
-#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
-#define SP_M_GEN_CLK_SEL		BIT(0)
-
-/* AUX Channel Access Status Register */
-#define SP_AUX_CH_STATUS_REG		0xe0
-#define SP_AUX_STATUS			0x0f
-
-/* AUX Channel DEFER Control Register */
-#define SP_AUX_DEFER_CTRL_REG		0xe2
-#define SP_DEFER_CTRL_EN		BIT(7)
-
-/* DP Buffer Data Count Register */
-#define SP_BUF_DATA_COUNT_REG		0xe4
-#define SP_BUF_DATA_COUNT_MASK		0x1f
-#define SP_BUF_CLR			BIT(7)
-
-/* DP AUX Channel Control Register 1 */
-#define SP_DP_AUX_CH_CTRL1_REG		0xe5
-#define SP_AUX_TX_COMM_MASK		0x0f
-#define SP_AUX_LENGTH_MASK		0xf0
-#define SP_AUX_LENGTH_SHIFT		4
-
-/* DP AUX CH Address Register 0 */
-#define SP_AUX_ADDR_7_0_REG		0xe6
-
-/* DP AUX CH Address Register 1 */
-#define SP_AUX_ADDR_15_8_REG		0xe7
-
-/* DP AUX CH Address Register 2 */
-#define SP_AUX_ADDR_19_16_REG		0xe8
-#define SP_AUX_ADDR_19_16_MASK		0x0f
-
-/* DP AUX Channel Control Register 2 */
-#define SP_DP_AUX_CH_CTRL2_REG		0xe9
-#define SP_AUX_SEL_RXCM			BIT(6)
-#define SP_AUX_CHSEL			BIT(3)
-#define SP_AUX_PN_INV			BIT(2)
-#define SP_ADDR_ONLY			BIT(1)
-#define SP_AUX_EN			BIT(0)
-
-/* DP Video Stream Control InfoFrame Register */
-#define SP_DP_3D_VSC_CTRL_REG		0xea
-#define SP_INFO_FRAME_VSC_EN		BIT(0)
-
-/* DP Video Stream Data Byte 1 Register */
-#define SP_DP_VSC_DB1_REG		0xeb
-
-/* DP AUX Channel Control Register 3 */
-#define SP_DP_AUX_CH_CTRL3_REG		0xec
-#define SP_WAIT_COUNTER_7_0_MASK	0xff
-
-/* DP AUX Channel Control Register 4 */
-#define SP_DP_AUX_CH_CTRL4_REG		0xed
-
-/* DP AUX Buffer Data Registers */
-#define SP_DP_BUF_DATA0_REG		0xf0
-
-/***************************************************************/
-/* Register definitions for TX_P2                              */
-/***************************************************************/
-
-/*
- * Core Register Definitions
- */
-
-/* Device ID Low Byte Register */
-#define SP_DEVICE_IDL_REG		0x02
-
-/* Device ID High Byte Register */
-#define SP_DEVICE_IDH_REG		0x03
-
-/* Device version register */
-#define SP_DEVICE_VERSION_REG		0x04
-
-/* Power Down Control Register */
-#define SP_POWERDOWN_CTRL_REG		0x05
-#define SP_REGISTER_PD			BIT(7)
-#define SP_HDCP_PD			BIT(5)
-#define SP_AUDIO_PD			BIT(4)
-#define SP_VIDEO_PD			BIT(3)
-#define SP_LINK_PD			BIT(2)
-#define SP_TOTAL_PD			BIT(1)
-
-/* Reset Control Register 1 */
-#define SP_RESET_CTRL1_REG		0x06
-#define SP_MISC_RST			BIT(7)
-#define SP_VIDCAP_RST			BIT(6)
-#define SP_VIDFIF_RST			BIT(5)
-#define SP_AUDFIF_RST			BIT(4)
-#define SP_AUDCAP_RST			BIT(3)
-#define SP_HDCP_RST			BIT(2)
-#define SP_SW_RST			BIT(1)
-#define SP_HW_RST			BIT(0)
-
-/* Reset Control Register 2 */
-#define SP_RESET_CTRL2_REG		0x07
-#define SP_AUX_RST			BIT(2)
-#define SP_SERDES_FIFO_RST		BIT(1)
-#define SP_I2C_REG_RST			BIT(0)
-
-/* Video Control Register 1 */
-#define SP_VID_CTRL1_REG		0x08
-#define SP_VIDEO_EN			BIT(7)
-#define SP_VIDEO_MUTE			BIT(2)
-#define SP_DE_GEN			BIT(1)
-#define SP_DEMUX			BIT(0)
-
-/* Video Control Register 2 */
-#define SP_VID_CTRL2_REG		0x09
-#define SP_IN_COLOR_F_MASK		0x03
-#define SP_IN_YC_BIT_SEL		BIT(2)
-#define SP_IN_BPC_MASK			0x70
-#define SP_IN_BPC_SHIFT			4
-#  define SP_IN_BPC_12BIT		0x03
-#  define SP_IN_BPC_10BIT		0x02
-#  define SP_IN_BPC_8BIT		0x01
-#  define SP_IN_BPC_6BIT		0x00
-#define SP_IN_D_RANGE			BIT(7)
-
-/* Video Control Register 3 */
-#define SP_VID_CTRL3_REG		0x0a
-#define SP_HPD_OUT			BIT(6)
-
-/* Video Control Register 5 */
-#define SP_VID_CTRL5_REG		0x0c
-#define SP_CSC_STD_SEL			BIT(7)
-#define SP_XVYCC_RNG_LMT		BIT(6)
-#define SP_RANGE_Y2R			BIT(5)
-#define SP_CSPACE_Y2R			BIT(4)
-#define SP_RGB_RNG_LMT			BIT(3)
-#define SP_Y_RNG_LMT			BIT(2)
-#define SP_RANGE_R2Y			BIT(1)
-#define SP_CSPACE_R2Y			BIT(0)
-
-/* Video Control Register 6 */
-#define SP_VID_CTRL6_REG		0x0d
-#define SP_TEST_PATTERN_EN		BIT(7)
-#define SP_VIDEO_PROCESS_EN		BIT(6)
-#define SP_VID_US_MODE			BIT(3)
-#define SP_VID_DS_MODE			BIT(2)
-#define SP_UP_SAMPLE			BIT(1)
-#define SP_DOWN_SAMPLE			BIT(0)
-
-/* Video Control Register 8 */
-#define SP_VID_CTRL8_REG		0x0f
-#define SP_VID_VRES_TH			BIT(0)
-
-/* Total Line Status Low Byte Register */
-#define SP_TOTAL_LINE_STAL_REG		0x24
-
-/* Total Line Status High Byte Register */
-#define SP_TOTAL_LINE_STAH_REG		0x25
-
-/* Active Line Status Low Byte Register */
-#define SP_ACT_LINE_STAL_REG		0x26
-
-/* Active Line Status High Byte Register */
-#define SP_ACT_LINE_STAH_REG		0x27
-
-/* Vertical Front Porch Status Register */
-#define SP_V_F_PORCH_STA_REG		0x28
-
-/* Vertical SYNC Width Status Register */
-#define SP_V_SYNC_STA_REG		0x29
-
-/* Vertical Back Porch Status Register */
-#define SP_V_B_PORCH_STA_REG		0x2a
-
-/* Total Pixel Status Low Byte Register */
-#define SP_TOTAL_PIXEL_STAL_REG		0x2b
-
-/* Total Pixel Status High Byte Register */
-#define SP_TOTAL_PIXEL_STAH_REG		0x2c
-
-/* Active Pixel Status Low Byte Register */
-#define SP_ACT_PIXEL_STAL_REG		0x2d
-
-/* Active Pixel Status High Byte Register */
-#define SP_ACT_PIXEL_STAH_REG		0x2e
-
-/* Horizontal Front Porch Status Low Byte Register */
-#define SP_H_F_PORCH_STAL_REG		0x2f
-
-/* Horizontal Front Porch Statys High Byte Register */
-#define SP_H_F_PORCH_STAH_REG		0x30
-
-/* Horizontal SYNC Width Status Low Byte Register */
-#define SP_H_SYNC_STAL_REG		0x31
-
-/* Horizontal SYNC Width Status High Byte Register */
-#define SP_H_SYNC_STAH_REG		0x32
-
-/* Horizontal Back Porch Status Low Byte Register */
-#define SP_H_B_PORCH_STAL_REG		0x33
-
-/* Horizontal Back Porch Status High Byte Register */
-#define SP_H_B_PORCH_STAH_REG		0x34
-
-/* InfoFrame AVI Packet DB1 Register */
-#define SP_INFOFRAME_AVI_DB1_REG	0x70
-
-/* Bit Control Specific Register */
-#define SP_BIT_CTRL_SPECIFIC_REG	0x80
-#define SP_BIT_CTRL_SELECT_SHIFT	1
-#define SP_ENABLE_BIT_CTRL		BIT(0)
-
-/* InfoFrame Audio Packet DB1 Register */
-#define SP_INFOFRAME_AUD_DB1_REG	0x83
-
-/* InfoFrame MPEG Packet DB1 Register */
-#define SP_INFOFRAME_MPEG_DB1_REG	0xb0
-
-/* Audio Channel Status Registers */
-#define SP_AUD_CH_STATUS_BASE		0xd0
-
-/* Audio Channel Num Register 5 */
-#define SP_I2S_CHANNEL_NUM_MASK		0xe0
-#  define SP_I2S_CH_NUM_1		(0x00 << 5)
-#  define SP_I2S_CH_NUM_2		(0x01 << 5)
-#  define SP_I2S_CH_NUM_3		(0x02 << 5)
-#  define SP_I2S_CH_NUM_4		(0x03 << 5)
-#  define SP_I2S_CH_NUM_5		(0x04 << 5)
-#  define SP_I2S_CH_NUM_6		(0x05 << 5)
-#  define SP_I2S_CH_NUM_7		(0x06 << 5)
-#  define SP_I2S_CH_NUM_8		(0x07 << 5)
-#define SP_EXT_VUCP			BIT(2)
-#define SP_VBIT				BIT(1)
-#define SP_AUDIO_LAYOUT			BIT(0)
-
-/* Analog Debug Register 2 */
-#define SP_ANALOG_DEBUG2_REG		0xdd
-#define SP_FORCE_SW_OFF_BYPASS		0x20
-#define SP_XTAL_FRQ			0x1c
-#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
-#  define SP_XTAL_FRQ_24M		(0x01 << 2)
-#  define SP_XTAL_FRQ_25M		(0x02 << 2)
-#  define SP_XTAL_FRQ_26M		(0x03 << 2)
-#  define SP_XTAL_FRQ_27M		(0x04 << 2)
-#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
-#  define SP_XTAL_FRQ_52M		(0x06 << 2)
-#define SP_POWERON_TIME_1P5MS		0x03
-
-/* Analog Control 0 Register */
-#define SP_ANALOG_CTRL0_REG		0xe1
-
-/* Common Interrupt Status Register 1 */
-#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
-#define SP_PLL_LOCK_CHG			0x40
-
-/* Common Interrupt Status Register 2 */
-#define SP_COMMON_INT_STATUS2		0xf2
-#define SP_HDCP_AUTH_CHG		BIT(1)
-#define SP_HDCP_AUTH_DONE		BIT(0)
-
-#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
-
-/* Common Interrupt Status Register 4 */
-#define SP_COMMON_INT_STATUS4_REG	0xf4
-#define SP_HPD_IRQ			BIT(6)
-#define SP_HPD_ESYNC_ERR		BIT(4)
-#define SP_HPD_CHG			BIT(2)
-#define SP_HPD_LOST			BIT(1)
-#define SP_HPD_PLUG			BIT(0)
-
-/* DP Interrupt Status Register */
-#define SP_DP_INT_STATUS1_REG		0xf7
-#define SP_TRAINING_FINISH		BIT(5)
-#define SP_POLLING_ERR			BIT(4)
-
-/* Common Interrupt Mask Register */
-#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
-
-#define SP_COMMON_INT_MASK4_REG		0xfb
-
-/* DP Interrupts Mask Register */
-#define SP_DP_INT_MASK1_REG		0xfe
-
-/* Interrupt Control Register */
-#define SP_INT_CTRL_REG			0xff
-
-/***************************************************************/
-/* Register definitions for TX_P1                              */
-/***************************************************************/
-
-/* DP TX Link Training Control Register */
-#define SP_DP_TX_LT_CTRL0_REG		0x30
-
-/* PD 1.2 Lint Training 80bit Pattern Register */
-#define SP_DP_LT_80BIT_PATTERN0_REG	0x80
-#define SP_DP_LT_80BIT_PATTERN_REG_NUM	10
-
-/* Audio Interface Control Register 0 */
-#define SP_AUD_INTERFACE_CTRL0_REG	0x5f
-#define SP_AUD_INTERFACE_DISABLE	0x80
-
-/* Audio Interface Control Register 2 */
-#define SP_AUD_INTERFACE_CTRL2_REG	0x60
-#define SP_M_AUD_ADJUST_ST		0x04
-
-/* Audio Interface Control Register 3 */
-#define SP_AUD_INTERFACE_CTRL3_REG	0x62
-
-/* Audio Interface Control Register 4 */
-#define SP_AUD_INTERFACE_CTRL4_REG	0x67
-
-/* Audio Interface Control Register 5 */
-#define SP_AUD_INTERFACE_CTRL5_REG	0x68
-
-/* Audio Interface Control Register 6 */
-#define SP_AUD_INTERFACE_CTRL6_REG	0x69
-
-/* Firmware Version Register */
-#define SP_FW_VER_REG			0xb7
-
-#endif
diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
index e930ff9b5cd4..e1fa7d820373 100644
--- a/drivers/gpu/drm/bridge/analogix/Kconfig
+++ b/drivers/gpu/drm/bridge/analogix/Kconfig
@@ -1,4 +1,27 @@
 # SPDX-License-Identifier: GPL-2.0-only
+config DRM_ANALOGIX_ANX6345
+	tristate "Analogix ANX6345 bridge"
+	depends on OF
+	select DRM_ANALOGIX_DP
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  ANX6345 is an ultra-low Full-HD DisplayPort/eDP
+	  transmitter designed for portable devices. The
+	  ANX6345 transforms the LVTTL RGB output of an
+	  application processor to eDP or DisplayPort.
+
+config DRM_ANALOGIX_ANX78XX
+	tristate "Analogix ANX78XX bridge"
+	select DRM_ANALOGIX_DP
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  ANX78XX is an ultra-low power Full-HD SlimPort transmitter
+	  designed for portable devices. The ANX78XX transforms
+	  the HDMI output of an application processor to MyDP
+	  or DisplayPort.
+
 config DRM_ANALOGIX_DP
 	tristate
 	depends on DRM
diff --git a/drivers/gpu/drm/bridge/analogix/Makefile b/drivers/gpu/drm/bridge/analogix/Makefile
index fdbf3fd2f087..97669b374098 100644
--- a/drivers/gpu/drm/bridge/analogix/Makefile
+++ b/drivers/gpu/drm/bridge/analogix/Makefile
@@ -1,3 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
-analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o
+analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o analogix-i2c-dptx.o
+obj-$(CONFIG_DRM_ANALOGIX_ANX6345) += analogix-anx6345.o
+obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
new file mode 100644
index 000000000000..9917ce0d86a0
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
@@ -0,0 +1,817 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ * Copyright(c) 2017, Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include "analogix-i2c-dptx.h"
+#include "analogix-i2c-txcommon.h"
+
+#define POLL_DELAY		50000 /* us */
+#define POLL_TIMEOUT		5000000 /* us */
+
+#define I2C_IDX_DPTX		0
+#define I2C_IDX_TXCOM		1
+
+static const u8 anx6345_i2c_addresses[] = {
+	[I2C_IDX_DPTX]	= 0x70,
+	[I2C_IDX_TXCOM]	= 0x72,
+};
+#define I2C_NUM_ADDRESSES	ARRAY_SIZE(anx6345_i2c_addresses)
+
+struct anx6345 {
+	struct drm_dp_aux aux;
+	struct drm_bridge bridge;
+	struct i2c_client *client;
+	struct edid *edid;
+	struct drm_connector connector;
+	struct drm_panel *panel;
+	struct regulator *dvdd12;
+	struct regulator *dvdd25;
+	struct gpio_desc *gpiod_reset;
+	struct mutex lock;	/* protect EDID access */
+
+	/* I2C Slave addresses of ANX6345 are mapped as DPTX and SYS */
+	struct i2c_client *i2c_clients[I2C_NUM_ADDRESSES];
+	struct regmap *map[I2C_NUM_ADDRESSES];
+
+	u16 chipid;
+	u8 dpcd[DP_RECEIVER_CAP_SIZE];
+
+	bool powered;
+};
+
+static inline struct anx6345 *connector_to_anx6345(struct drm_connector *c)
+{
+	return container_of(c, struct anx6345, connector);
+}
+
+static inline struct anx6345 *bridge_to_anx6345(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct anx6345, bridge);
+}
+
+static int anx6345_set_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, mask);
+}
+
+static int anx6345_clear_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, 0);
+}
+
+static ssize_t anx6345_aux_transfer(struct drm_dp_aux *aux,
+				    struct drm_dp_aux_msg *msg)
+{
+	struct anx6345 *anx6345 = container_of(aux, struct anx6345, aux);
+
+	return anx_dp_aux_transfer(anx6345->map[I2C_IDX_DPTX], msg);
+}
+
+static int anx6345_dp_link_training(struct anx6345 *anx6345)
+{
+	unsigned int value;
+	u8 dp_bw, dpcd[2];
+	int err;
+
+	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+				 SP_POWERDOWN_CTRL_REG,
+				 SP_TOTAL_PD);
+	if (err)
+		return err;
+
+	err = drm_dp_dpcd_readb(&anx6345->aux, DP_MAX_LINK_RATE, &dp_bw);
+	if (err < 0)
+		return err;
+
+	switch (dp_bw) {
+	case DP_LINK_BW_1_62:
+	case DP_LINK_BW_2_7:
+		break;
+
+	default:
+		DRM_DEBUG_KMS("DP bandwidth (%#02x) not supported\n", dp_bw);
+		return -EINVAL;
+	}
+
+	err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
+			       SP_VIDEO_MUTE);
+	if (err)
+		return err;
+
+	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+				 SP_VID_CTRL1_REG, SP_VIDEO_EN);
+	if (err)
+		return err;
+
+	/* Get DPCD info */
+	err = drm_dp_dpcd_read(&anx6345->aux, DP_DPCD_REV,
+			       &anx6345->dpcd, DP_RECEIVER_CAP_SIZE);
+	if (err < 0) {
+		DRM_ERROR("Failed to read DPCD: %d\n", err);
+		return err;
+	}
+
+	/* Clear channel x SERDES power down */
+	err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX],
+				 SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
+	if (err)
+		return err;
+
+	/*
+	 * Power up the sink (DP_SET_POWER register is only available on DPCD
+	 * v1.1 and later).
+	 */
+	if (anx6345->dpcd[DP_DPCD_REV] >= 0x11) {
+		err = drm_dp_dpcd_readb(&anx6345->aux, DP_SET_POWER, &dpcd[0]);
+		if (err < 0) {
+			DRM_ERROR("Failed to read DP_SET_POWER register: %d\n",
+				  err);
+			return err;
+		}
+
+		dpcd[0] &= ~DP_SET_POWER_MASK;
+		dpcd[0] |= DP_SET_POWER_D0;
+
+		err = drm_dp_dpcd_writeb(&anx6345->aux, DP_SET_POWER, dpcd[0]);
+		if (err < 0) {
+			DRM_ERROR("Failed to power up DisplayPort link: %d\n",
+				  err);
+			return err;
+		}
+
+		/*
+		 * According to the DP 1.1 specification, a "Sink Device must
+		 * exit the power saving state within 1 ms" (Section 2.5.3.1,
+		 * Table 5-52, "Sink Control Field" (register 0x600).
+		 */
+		usleep_range(1000, 2000);
+	}
+
+	/* Possibly enable downspread on the sink */
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+			   SP_DP_DOWNSPREAD_CTRL1_REG, 0);
+	if (err)
+		return err;
+
+	if (anx6345->dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) {
+		DRM_DEBUG("Enable downspread on the sink\n");
+		/* 4000PPM */
+		err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+				   SP_DP_DOWNSPREAD_CTRL1_REG, 8);
+		if (err)
+			return err;
+
+		err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL,
+					 DP_SPREAD_AMP_0_5);
+		if (err < 0)
+			return err;
+	} else {
+		err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL, 0);
+		if (err < 0)
+			return err;
+	}
+
+	/* Set the lane count and the link rate on the sink */
+	if (drm_dp_enhanced_frame_cap(anx6345->dpcd))
+		err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
+				       SP_DP_SYSTEM_CTRL_BASE + 4,
+				       SP_ENHANCED_MODE);
+	else
+		err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX],
+					 SP_DP_SYSTEM_CTRL_BASE + 4,
+					 SP_ENHANCED_MODE);
+	if (err)
+		return err;
+
+	dpcd[0] = drm_dp_max_link_rate(anx6345->dpcd);
+	dpcd[0] = drm_dp_link_rate_to_bw_code(dpcd[0]);
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+			   SP_DP_MAIN_LINK_BW_SET_REG, dpcd[0]);
+	if (err)
+		return err;
+
+	dpcd[1] = drm_dp_max_lane_count(anx6345->dpcd);
+
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+			   SP_DP_LANE_COUNT_SET_REG, dpcd[1]);
+	if (err)
+		return err;
+
+	if (drm_dp_enhanced_frame_cap(anx6345->dpcd))
+		dpcd[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+
+	err = drm_dp_dpcd_write(&anx6345->aux, DP_LINK_BW_SET, dpcd,
+				sizeof(dpcd));
+
+	if (err < 0) {
+		DRM_ERROR("Failed to configure link: %d\n", err);
+		return err;
+	}
+
+	/* Start training on the source */
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_LT_CTRL_REG,
+			   SP_LT_EN);
+	if (err)
+		return err;
+
+	return regmap_read_poll_timeout(anx6345->map[I2C_IDX_DPTX],
+				       SP_DP_LT_CTRL_REG,
+				       value, !(value & SP_DP_LT_INPROGRESS),
+				       POLL_DELAY, POLL_TIMEOUT);
+}
+
+static int anx6345_tx_initialization(struct anx6345 *anx6345)
+{
+	int err, i;
+
+	/* FIXME: colordepth is hardcoded for now */
+	err = regmap_write(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL2_REG,
+			   SP_IN_BPC_6BIT << SP_IN_BPC_SHIFT);
+	if (err)
+		return err;
+
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_PLL_CTRL_REG, 0);
+	if (err)
+		return err;
+
+	err = regmap_write(anx6345->map[I2C_IDX_TXCOM],
+			   SP_ANALOG_DEBUG1_REG, 0);
+	if (err)
+		return err;
+
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+			   SP_DP_LINK_DEBUG_CTRL_REG,
+			   SP_NEW_PRBS7 | SP_M_VID_DEBUG);
+	if (err)
+		return err;
+
+	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+			   SP_DP_ANALOG_POWER_DOWN_REG, 0);
+	if (err)
+		return err;
+
+	/* Force HPD */
+	err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
+			       SP_DP_SYSTEM_CTRL_BASE + 3,
+			       SP_HPD_FORCE | SP_HPD_CTRL);
+	if (err)
+		return err;
+
+	for (i = 0; i < 4; i++) {
+		/* 4 lanes */
+		err = regmap_write(anx6345->map[I2C_IDX_DPTX],
+				   SP_DP_LANE0_LT_CTRL_REG + i, 0);
+		if (err)
+			return err;
+	}
+
+	/* Reset AUX */
+	err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM],
+			       SP_RESET_CTRL2_REG, SP_AUX_RST);
+	if (err)
+		return err;
+
+	return anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+				 SP_RESET_CTRL2_REG, SP_AUX_RST);
+}
+
+static void anx6345_poweron(struct anx6345 *anx6345)
+{
+	int err;
+
+	/* Ensure reset is asserted before starting power on sequence */
+	gpiod_set_value_cansleep(anx6345->gpiod_reset, 1);
+	usleep_range(1000, 2000);
+
+	err = regulator_enable(anx6345->dvdd12);
+	if (err) {
+		DRM_ERROR("Failed to enable dvdd12 regulator: %d\n",
+			  err);
+		return;
+	}
+
+	/* T1 - delay between VDD12 and VDD25 should be 0-2ms */
+	usleep_range(1000, 2000);
+
+	err = regulator_enable(anx6345->dvdd25);
+	if (err) {
+		DRM_ERROR("Failed to enable dvdd25 regulator: %d\n",
+			  err);
+		return;
+	}
+
+	/* T2 - delay between RESETN and all power rail stable,
+	 * should be 2-5ms
+	 */
+	usleep_range(2000, 5000);
+
+	gpiod_set_value_cansleep(anx6345->gpiod_reset, 0);
+
+	/* Power on registers module */
+	anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
+			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+	anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
+			   SP_REGISTER_PD | SP_TOTAL_PD);
+
+	if (anx6345->panel)
+		drm_panel_prepare(anx6345->panel);
+
+	anx6345->powered = true;
+}
+
+static void anx6345_poweroff(struct anx6345 *anx6345)
+{
+	int err;
+
+	gpiod_set_value_cansleep(anx6345->gpiod_reset, 1);
+	usleep_range(1000, 2000);
+
+	if (anx6345->panel)
+		drm_panel_unprepare(anx6345->panel);
+
+	err = regulator_disable(anx6345->dvdd25);
+	if (err) {
+		DRM_ERROR("Failed to disable dvdd25 regulator: %d\n",
+			  err);
+		return;
+	}
+
+	usleep_range(5000, 10000);
+
+	err = regulator_disable(anx6345->dvdd12);
+	if (err) {
+		DRM_ERROR("Failed to disable dvdd12 regulator: %d\n",
+			  err);
+		return;
+	}
+
+	usleep_range(1000, 2000);
+
+	anx6345->powered = false;
+}
+
+static int anx6345_start(struct anx6345 *anx6345)
+{
+	int err;
+
+	if (!anx6345->powered)
+		anx6345_poweron(anx6345);
+
+	/* Power on needed modules */
+	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
+				SP_POWERDOWN_CTRL_REG,
+				SP_VIDEO_PD | SP_LINK_PD);
+
+	err = anx6345_tx_initialization(anx6345);
+	if (err) {
+		DRM_ERROR("Failed eDP transmitter initialization: %d\n", err);
+		anx6345_poweroff(anx6345);
+		return err;
+	}
+
+	err = anx6345_dp_link_training(anx6345);
+	if (err) {
+		DRM_ERROR("Failed link training: %d\n", err);
+		anx6345_poweroff(anx6345);
+		return err;
+	}
+
+	/*
+	 * This delay seems to help keep the hardware in a good state. Without
+	 * it, there are times where it fails silently.
+	 */
+	usleep_range(10000, 15000);
+
+	return 0;
+}
+
+static int anx6345_config_dp_output(struct anx6345 *anx6345)
+{
+	int err;
+
+	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
+				 SP_VIDEO_MUTE);
+	if (err)
+		return err;
+
+	/* Enable DP output */
+	err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
+			       SP_VIDEO_EN);
+	if (err)
+		return err;
+
+	/* Force stream valid */
+	return anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
+			       SP_DP_SYSTEM_CTRL_BASE + 3,
+			       SP_STRM_FORCE | SP_STRM_CTRL);
+}
+
+static int anx6345_get_downstream_info(struct anx6345 *anx6345)
+{
+	u8 value;
+	int err;
+
+	err = drm_dp_dpcd_readb(&anx6345->aux, DP_SINK_COUNT, &value);
+	if (err < 0) {
+		DRM_ERROR("Get sink count failed %d\n", err);
+		return err;
+	}
+
+	if (!DP_GET_SINK_COUNT(value)) {
+		DRM_ERROR("Downstream disconnected\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int anx6345_get_modes(struct drm_connector *connector)
+{
+	struct anx6345 *anx6345 = connector_to_anx6345(connector);
+	int err, num_modes = 0;
+	bool power_off = false;
+
+	mutex_lock(&anx6345->lock);
+
+	if (!anx6345->edid) {
+		if (!anx6345->powered) {
+			anx6345_poweron(anx6345);
+			power_off = true;
+		}
+
+		err = anx6345_get_downstream_info(anx6345);
+		if (err) {
+			DRM_ERROR("Failed to get downstream info: %d\n", err);
+			goto unlock;
+		}
+
+		anx6345->edid = drm_get_edid(connector, &anx6345->aux.ddc);
+		if (!anx6345->edid)
+			DRM_ERROR("Failed to read EDID from panel\n");
+
+		err = drm_connector_update_edid_property(connector,
+							 anx6345->edid);
+		if (err) {
+			DRM_ERROR("Failed to update EDID property: %d\n", err);
+			goto unlock;
+		}
+	}
+
+	num_modes += drm_add_edid_modes(connector, anx6345->edid);
+
+unlock:
+	if (power_off)
+		anx6345_poweroff(anx6345);
+
+	mutex_unlock(&anx6345->lock);
+
+	if (!num_modes && anx6345->panel)
+		num_modes += drm_panel_get_modes(anx6345->panel, connector);
+
+	return num_modes;
+}
+
+static const struct drm_connector_helper_funcs anx6345_connector_helper_funcs = {
+	.get_modes = anx6345_get_modes,
+};
+
+static void
+anx6345_connector_destroy(struct drm_connector *connector)
+{
+	struct anx6345 *anx6345 = connector_to_anx6345(connector);
+
+	if (anx6345->panel)
+		drm_panel_detach(anx6345->panel);
+	drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs anx6345_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = anx6345_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int anx6345_bridge_attach(struct drm_bridge *bridge)
+{
+	struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
+	int err;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	/* Register aux channel */
+	anx6345->aux.name = "DP-AUX";
+	anx6345->aux.dev = &anx6345->client->dev;
+	anx6345->aux.transfer = anx6345_aux_transfer;
+
+	err = drm_dp_aux_register(&anx6345->aux);
+	if (err < 0) {
+		DRM_ERROR("Failed to register aux channel: %d\n", err);
+		return err;
+	}
+
+	err = drm_connector_init(bridge->dev, &anx6345->connector,
+				 &anx6345_connector_funcs,
+				 DRM_MODE_CONNECTOR_eDP);
+	if (err) {
+		DRM_ERROR("Failed to initialize connector: %d\n", err);
+		return err;
+	}
+
+	drm_connector_helper_add(&anx6345->connector,
+				 &anx6345_connector_helper_funcs);
+
+	err = drm_connector_register(&anx6345->connector);
+	if (err) {
+		DRM_ERROR("Failed to register connector: %d\n", err);
+		return err;
+	}
+
+	anx6345->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	err = drm_connector_attach_encoder(&anx6345->connector,
+					   bridge->encoder);
+	if (err) {
+		DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
+		return err;
+	}
+
+	if (anx6345->panel) {
+		err = drm_panel_attach(anx6345->panel, &anx6345->connector);
+		if (err) {
+			DRM_ERROR("Failed to attach panel: %d\n", err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static enum drm_mode_status
+anx6345_bridge_mode_valid(struct drm_bridge *bridge,
+			  const struct drm_display_mode *mode)
+{
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	/* Max 1200p at 5.4 Ghz, one lane */
+	if (mode->clock > 154000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void anx6345_bridge_disable(struct drm_bridge *bridge)
+{
+	struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
+
+	/* Power off all modules except configuration registers access */
+	anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
+			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+	if (anx6345->panel)
+		drm_panel_disable(anx6345->panel);
+
+	if (anx6345->powered)
+		anx6345_poweroff(anx6345);
+}
+
+static void anx6345_bridge_enable(struct drm_bridge *bridge)
+{
+	struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
+	int err;
+
+	if (anx6345->panel)
+		drm_panel_enable(anx6345->panel);
+
+	err = anx6345_start(anx6345);
+	if (err) {
+		DRM_ERROR("Failed to initialize: %d\n", err);
+		return;
+	}
+
+	err = anx6345_config_dp_output(anx6345);
+	if (err)
+		DRM_ERROR("Failed to enable DP output: %d\n", err);
+}
+
+static const struct drm_bridge_funcs anx6345_bridge_funcs = {
+	.attach = anx6345_bridge_attach,
+	.mode_valid = anx6345_bridge_mode_valid,
+	.disable = anx6345_bridge_disable,
+	.enable = anx6345_bridge_enable,
+};
+
+static void unregister_i2c_dummy_clients(struct anx6345 *anx6345)
+{
+	unsigned int i;
+
+	for (i = 1; i < ARRAY_SIZE(anx6345->i2c_clients); i++)
+		if (anx6345->i2c_clients[i] &&
+		    anx6345->i2c_clients[i]->addr != anx6345->client->addr)
+			i2c_unregister_device(anx6345->i2c_clients[i]);
+}
+
+static const struct regmap_config anx6345_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xff,
+	.cache_type = REGCACHE_NONE,
+};
+
+static const u16 anx6345_chipid_list[] = {
+	0x6345,
+};
+
+static bool anx6345_get_chip_id(struct anx6345 *anx6345)
+{
+	unsigned int i, idl, idh, version;
+
+	if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDL_REG, &idl))
+		return false;
+
+	if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDH_REG, &idh))
+		return false;
+
+	anx6345->chipid = (u8)idl | ((u8)idh << 8);
+
+	if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_VERSION_REG,
+			&version))
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(anx6345_chipid_list); i++) {
+		if (anx6345->chipid == anx6345_chipid_list[i]) {
+			DRM_INFO("Found ANX%x (ver. %d) eDP Transmitter\n",
+				 anx6345->chipid, version);
+			return true;
+		}
+	}
+
+	DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n",
+		  anx6345->chipid, version);
+
+	return false;
+}
+
+static int anx6345_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct anx6345 *anx6345;
+	struct device *dev;
+	int i, err;
+
+	anx6345 = devm_kzalloc(&client->dev, sizeof(*anx6345), GFP_KERNEL);
+	if (!anx6345)
+		return -ENOMEM;
+
+	mutex_init(&anx6345->lock);
+
+	anx6345->bridge.of_node = client->dev.of_node;
+
+	anx6345->client = client;
+	i2c_set_clientdata(client, anx6345);
+
+	dev = &anx6345->client->dev;
+
+	err = drm_of_find_panel_or_bridge(client->dev.of_node, 1, 0,
+					  &anx6345->panel, NULL);
+	if (err == -EPROBE_DEFER)
+		return err;
+
+	if (err)
+		DRM_DEBUG("No panel found\n");
+
+	/* 1.2V digital core power regulator  */
+	anx6345->dvdd12 = devm_regulator_get(dev, "dvdd12-supply");
+	if (IS_ERR(anx6345->dvdd12)) {
+		DRM_ERROR("dvdd12-supply not found\n");
+		return PTR_ERR(anx6345->dvdd12);
+	}
+
+	/* 2.5V digital core power regulator  */
+	anx6345->dvdd25 = devm_regulator_get(dev, "dvdd25-supply");
+	if (IS_ERR(anx6345->dvdd25)) {
+		DRM_ERROR("dvdd25-supply not found\n");
+		return PTR_ERR(anx6345->dvdd25);
+	}
+
+	/* GPIO for chip reset */
+	anx6345->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(anx6345->gpiod_reset)) {
+		DRM_ERROR("Reset gpio not found\n");
+		return PTR_ERR(anx6345->gpiod_reset);
+	}
+
+	/* Map slave addresses of ANX6345 */
+	for (i = 0; i < I2C_NUM_ADDRESSES; i++) {
+		if (anx6345_i2c_addresses[i] >> 1 != client->addr)
+			anx6345->i2c_clients[i] = i2c_new_dummy(client->adapter,
+						anx6345_i2c_addresses[i] >> 1);
+		else
+			anx6345->i2c_clients[i] = client;
+
+		if (!anx6345->i2c_clients[i]) {
+			err = -ENOMEM;
+			DRM_ERROR("Failed to reserve I2C bus %02x\n",
+				  anx6345_i2c_addresses[i]);
+			goto err_unregister_i2c;
+		}
+
+		anx6345->map[i] = devm_regmap_init_i2c(anx6345->i2c_clients[i],
+						       &anx6345_regmap_config);
+		if (IS_ERR(anx6345->map[i])) {
+			err = PTR_ERR(anx6345->map[i]);
+			DRM_ERROR("Failed regmap initialization %02x\n",
+				  anx6345_i2c_addresses[i]);
+			goto err_unregister_i2c;
+		}
+	}
+
+	/* Look for supported chip ID */
+	anx6345_poweron(anx6345);
+	if (anx6345_get_chip_id(anx6345)) {
+		anx6345->bridge.funcs = &anx6345_bridge_funcs;
+		drm_bridge_add(&anx6345->bridge);
+
+		return 0;
+	} else {
+		anx6345_poweroff(anx6345);
+		err = -ENODEV;
+	}
+
+err_unregister_i2c:
+	unregister_i2c_dummy_clients(anx6345);
+	return err;
+}
+
+static int anx6345_i2c_remove(struct i2c_client *client)
+{
+	struct anx6345 *anx6345 = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&anx6345->bridge);
+
+	unregister_i2c_dummy_clients(anx6345);
+
+	kfree(anx6345->edid);
+
+	mutex_destroy(&anx6345->lock);
+
+	return 0;
+}
+
+static const struct i2c_device_id anx6345_id[] = {
+	{ "anx6345", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, anx6345_id);
+
+static const struct of_device_id anx6345_match_table[] = {
+	{ .compatible = "analogix,anx6345", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, anx6345_match_table);
+
+static struct i2c_driver anx6345_driver = {
+	.driver = {
+		   .name = "anx6345",
+		   .of_match_table = of_match_ptr(anx6345_match_table),
+		  },
+	.probe = anx6345_i2c_probe,
+	.remove = anx6345_i2c_remove,
+	.id_table = anx6345_id,
+};
+module_i2c_driver(anx6345_driver);
+
+MODULE_DESCRIPTION("ANX6345 eDP Transmitter driver");
+MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
index 274989f96a91..41867be03751 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
@@ -36,8 +36,6 @@
 #define I2C_IDX_RX_P1		4
 
 #define XTAL_CLK		270 /* 27M */
-#define AUX_CH_BUFFER_SIZE	16
-#define AUX_WAIT_TIMEOUT_MS	15
 
 static const u8 anx7808_i2c_addresses[] = {
 	[I2C_IDX_TX_P0] = 0x78,
@@ -107,153 +105,11 @@ static int anx78xx_clear_bits(struct regmap *map, u8 reg, u8 mask)
 	return regmap_update_bits(map, reg, mask, 0);
 }
 
-static bool anx78xx_aux_op_finished(struct anx78xx *anx78xx)
-{
-	unsigned int value;
-	int err;
-
-	err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG,
-			  &value);
-	if (err < 0)
-		return false;
-
-	return (value & SP_AUX_EN) == 0;
-}
-
-static int anx78xx_aux_wait(struct anx78xx *anx78xx)
-{
-	unsigned long timeout;
-	unsigned int status;
-	int err;
-
-	timeout = jiffies + msecs_to_jiffies(AUX_WAIT_TIMEOUT_MS) + 1;
-
-	while (!anx78xx_aux_op_finished(anx78xx)) {
-		if (time_after(jiffies, timeout)) {
-			if (!anx78xx_aux_op_finished(anx78xx)) {
-				DRM_ERROR("Timed out waiting AUX to finish\n");
-				return -ETIMEDOUT;
-			}
-
-			break;
-		}
-
-		usleep_range(1000, 2000);
-	}
-
-	/* Read the AUX channel access status */
-	err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_CH_STATUS_REG,
-			  &status);
-	if (err < 0) {
-		DRM_ERROR("Failed to read from AUX channel: %d\n", err);
-		return err;
-	}
-
-	if (status & SP_AUX_STATUS) {
-		DRM_ERROR("Failed to wait for AUX channel (status: %02x)\n",
-			  status);
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-static int anx78xx_aux_address(struct anx78xx *anx78xx, unsigned int addr)
-{
-	int err;
-
-	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_7_0_REG,
-			   addr & 0xff);
-	if (err)
-		return err;
-
-	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_15_8_REG,
-			   (addr & 0xff00) >> 8);
-	if (err)
-		return err;
-
-	/*
-	 * DP AUX CH Address Register #2, only update bits[3:0]
-	 * [7:4] RESERVED
-	 * [3:0] AUX_ADDR[19:16], Register control AUX CH address.
-	 */
-	err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
-				 SP_AUX_ADDR_19_16_REG,
-				 SP_AUX_ADDR_19_16_MASK,
-				 (addr & 0xf0000) >> 16);
-
-	if (err)
-		return err;
-
-	return 0;
-}
-
 static ssize_t anx78xx_aux_transfer(struct drm_dp_aux *aux,
 				    struct drm_dp_aux_msg *msg)
 {
 	struct anx78xx *anx78xx = container_of(aux, struct anx78xx, aux);
-	u8 ctrl1 = msg->request;
-	u8 ctrl2 = SP_AUX_EN;
-	u8 *buffer = msg->buffer;
-	int err;
-
-	/* The DP AUX transmit and receive buffer has 16 bytes. */
-	if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE))
-		return -E2BIG;
-
-	/* Zero-sized messages specify address-only transactions. */
-	if (msg->size < 1)
-		ctrl2 |= SP_ADDR_ONLY;
-	else	/* For non-zero-sized set the length field. */
-		ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
-
-	if ((msg->request & DP_AUX_I2C_READ) == 0) {
-		/* When WRITE | MOT write values to data buffer */
-		err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P0],
-					SP_DP_BUF_DATA0_REG, buffer,
-					msg->size);
-		if (err)
-			return err;
-	}
-
-	/* Write address and request */
-	err = anx78xx_aux_address(anx78xx, msg->address);
-	if (err)
-		return err;
-
-	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL1_REG,
-			   ctrl1);
-	if (err)
-		return err;
-
-	/* Start transaction */
-	err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
-				 SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY |
-				 SP_AUX_EN, ctrl2);
-	if (err)
-		return err;
-
-	err = anx78xx_aux_wait(anx78xx);
-	if (err)
-		return err;
-
-	msg->reply = DP_AUX_I2C_REPLY_ACK;
-
-	if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) {
-		/* Read values from data buffer */
-		err = regmap_bulk_read(anx78xx->map[I2C_IDX_TX_P0],
-				       SP_DP_BUF_DATA0_REG, buffer,
-				       msg->size);
-		if (err)
-			return err;
-	}
-
-	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
-				 SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY);
-	if (err)
-		return err;
-
-	return msg->size;
+	return anx_dp_aux_transfer(anx78xx->map[I2C_IDX_TX_P0], msg);
 }
 
 static int anx78xx_set_hpd(struct anx78xx *anx78xx)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
new file mode 100644
index 000000000000..db2a2725acb2
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
+ */
+
+#ifndef __ANX78xx_H
+#define __ANX78xx_H
+
+#include "analogix-i2c-dptx.h"
+#include "analogix-i2c-txcommon.h"
+
+/***************************************************************/
+/* Register definitions for RX_PO                              */
+/***************************************************************/
+
+/*
+ * System Control and Status
+ */
+
+/* Software Reset Register 1 */
+#define SP_SOFTWARE_RESET1_REG		0x11
+#define SP_VIDEO_RST			BIT(4)
+#define SP_HDCP_MAN_RST			BIT(2)
+#define SP_TMDS_RST			BIT(1)
+#define SP_SW_MAN_RST			BIT(0)
+
+/* System Status Register */
+#define SP_SYSTEM_STATUS_REG		0x14
+#define SP_TMDS_CLOCK_DET		BIT(1)
+#define SP_TMDS_DE_DET			BIT(0)
+
+/* HDMI Status Register */
+#define SP_HDMI_STATUS_REG		0x15
+#define SP_HDMI_AUD_LAYOUT		BIT(3)
+#define SP_HDMI_DET			BIT(0)
+#  define SP_DVI_MODE			0
+#  define SP_HDMI_MODE			1
+
+/* HDMI Mute Control Register */
+#define SP_HDMI_MUTE_CTRL_REG		0x16
+#define SP_AUD_MUTE			BIT(1)
+#define SP_VID_MUTE			BIT(0)
+
+/* System Power Down Register 1 */
+#define SP_SYSTEM_POWER_DOWN1_REG	0x18
+#define SP_PWDN_CTRL			BIT(0)
+
+/*
+ * Audio and Video Auto Control
+ */
+
+/* Auto Audio and Video Control register */
+#define SP_AUDVID_CTRL_REG		0x20
+#define SP_AVC_OE			BIT(7)
+#define SP_AAC_OE			BIT(6)
+#define SP_AVC_EN			BIT(1)
+#define SP_AAC_EN			BIT(0)
+
+/* Audio Exception Enable Registers */
+#define SP_AUD_EXCEPTION_ENABLE_BASE	(0x24 - 1)
+/* Bits for Audio Exception Enable Register 3 */
+#define SP_AEC_EN21			BIT(5)
+
+/*
+ * Interrupt
+ */
+
+/* Interrupt Status Register 1 */
+#define SP_INT_STATUS1_REG		0x31
+/* Bits for Interrupt Status Register 1 */
+#define SP_HDMI_DVI			BIT(7)
+#define SP_CKDT_CHG			BIT(6)
+#define SP_SCDT_CHG			BIT(5)
+#define SP_PCLK_CHG			BIT(4)
+#define SP_PLL_UNLOCK			BIT(3)
+#define SP_CABLE_PLUG_CHG		BIT(2)
+#define SP_SET_MUTE			BIT(1)
+#define SP_SW_INTR			BIT(0)
+/* Bits for Interrupt Status Register 2 */
+#define SP_HDCP_ERR			BIT(5)
+#define SP_AUDIO_SAMPLE_CHG		BIT(0)	/* undocumented */
+/* Bits for Interrupt Status Register 3 */
+#define SP_AUD_MODE_CHG			BIT(0)
+/* Bits for Interrupt Status Register 5 */
+#define SP_AUDIO_RCV			BIT(0)
+/* Bits for Interrupt Status Register 6 */
+#define SP_INT_STATUS6_REG		0x36
+#define SP_CTS_RCV			BIT(7)
+#define SP_NEW_AUD_PKT			BIT(4)
+#define SP_NEW_AVI_PKT			BIT(1)
+#define SP_NEW_CP_PKT			BIT(0)
+/* Bits for Interrupt Status Register 7 */
+#define SP_NO_VSI			BIT(7)
+#define SP_NEW_VS			BIT(4)
+
+/* Interrupt Mask 1 Status Registers */
+#define SP_INT_MASK1_REG		0x41
+
+/* HDMI US TIMER Control Register */
+#define SP_HDMI_US_TIMER_CTRL_REG	0x49
+#define SP_MS_TIMER_MARGIN_10_8_MASK	0x07
+
+/*
+ * TMDS Control
+ */
+
+/* TMDS Control Registers */
+#define SP_TMDS_CTRL_BASE		(0x50 - 1)
+/* Bits for TMDS Control Register 7 */
+#define SP_PD_RT			BIT(0)
+
+/*
+ * Video Control
+ */
+
+/* Video Status Register */
+#define SP_VIDEO_STATUS_REG		0x70
+#define SP_COLOR_DEPTH_MASK		0xf0
+#define SP_COLOR_DEPTH_SHIFT		4
+#  define SP_COLOR_DEPTH_MODE_LEGACY	0x00
+#  define SP_COLOR_DEPTH_MODE_24BIT	0x04
+#  define SP_COLOR_DEPTH_MODE_30BIT	0x05
+#  define SP_COLOR_DEPTH_MODE_36BIT	0x06
+#  define SP_COLOR_DEPTH_MODE_48BIT	0x07
+
+/* Video Data Range Control Register */
+#define SP_VID_DATA_RANGE_CTRL_REG	0x83
+#define SP_R2Y_INPUT_LIMIT		BIT(1)
+
+/* Pixel Clock High Resolution Counter Registers */
+#define SP_PCLK_HIGHRES_CNT_BASE	(0x8c - 1)
+
+/*
+ * Audio Control
+ */
+
+/* Number of Audio Channels Status Registers */
+#define SP_AUD_CH_STATUS_REG_NUM	6
+
+/* Audio IN S/PDIF Channel Status Registers */
+#define SP_AUD_SPDIF_CH_STATUS_BASE	0xc7
+
+/* Audio IN S/PDIF Channel Status Register 4 */
+#define SP_FS_FREQ_MASK			0x0f
+#  define SP_FS_FREQ_44100HZ		0x00
+#  define SP_FS_FREQ_48000HZ		0x02
+#  define SP_FS_FREQ_32000HZ		0x03
+#  define SP_FS_FREQ_88200HZ		0x08
+#  define SP_FS_FREQ_96000HZ		0x0a
+#  define SP_FS_FREQ_176400HZ		0x0c
+#  define SP_FS_FREQ_192000HZ		0x0e
+
+/*
+ * Micellaneous Control Block
+ */
+
+/* CHIP Control Register */
+#define SP_CHIP_CTRL_REG		0xe3
+#define SP_MAN_HDMI5V_DET		BIT(3)
+#define SP_PLLLOCK_CKDT_EN		BIT(2)
+#define SP_ANALOG_CKDT_EN		BIT(1)
+#define SP_DIGITAL_CKDT_EN		BIT(0)
+
+/* Packet Receiving Status Register */
+#define SP_PACKET_RECEIVING_STATUS_REG	0xf3
+#define SP_AVI_RCVD			BIT(5)
+#define SP_VSI_RCVD			BIT(1)
+
+/***************************************************************/
+/* Register definitions for RX_P1                              */
+/***************************************************************/
+
+/* HDCP BCAPS Shadow Register */
+#define SP_HDCP_BCAPS_SHADOW_REG	0x2a
+#define SP_BCAPS_REPEATER		BIT(5)
+
+/* HDCP Status Register */
+#define SP_RX_HDCP_STATUS_REG		0x3f
+#define SP_AUTH_EN			BIT(4)
+
+/*
+ * InfoFrame and Control Packet Registers
+ */
+
+/* AVI InfoFrame packet checksum */
+#define SP_AVI_INFOFRAME_CHECKSUM	0xa3
+
+/* AVI InfoFrame Registers */
+#define SP_AVI_INFOFRAME_DATA_BASE	0xa4
+
+#define SP_AVI_COLOR_F_MASK		0x60
+#define SP_AVI_COLOR_F_SHIFT		5
+
+/* Audio InfoFrame Registers */
+#define SP_AUD_INFOFRAME_DATA_BASE	0xc4
+#define SP_AUD_INFOFRAME_LAYOUT_MASK	0x0f
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet type code */
+#define SP_MPEG_VS_INFOFRAME_TYPE_REG	0xe0
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet length */
+#define SP_MPEG_VS_INFOFRAME_LEN_REG	0xe2
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet version number */
+#define SP_MPEG_VS_INFOFRAME_VER_REG	0xe1
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet content */
+#define SP_MPEG_VS_INFOFRAME_DATA_BASE	0xe4
+
+/* General Control Packet Register */
+#define SP_GENERAL_CTRL_PACKET_REG	0x9f
+#define SP_CLEAR_AVMUTE			BIT(4)
+#define SP_SET_AVMUTE			BIT(0)
+
+/***************************************************************/
+/* Register definitions for TX_P1                              */
+/***************************************************************/
+
+/* DP TX Link Training Control Register */
+#define SP_DP_TX_LT_CTRL0_REG		0x30
+
+/* PD 1.2 Lint Training 80bit Pattern Register */
+#define SP_DP_LT_80BIT_PATTERN0_REG	0x80
+#define SP_DP_LT_80BIT_PATTERN_REG_NUM	10
+
+/* Audio Interface Control Register 0 */
+#define SP_AUD_INTERFACE_CTRL0_REG	0x5f
+#define SP_AUD_INTERFACE_DISABLE	0x80
+
+/* Audio Interface Control Register 2 */
+#define SP_AUD_INTERFACE_CTRL2_REG	0x60
+#define SP_M_AUD_ADJUST_ST		0x04
+
+/* Audio Interface Control Register 3 */
+#define SP_AUD_INTERFACE_CTRL3_REG	0x62
+
+/* Audio Interface Control Register 4 */
+#define SP_AUD_INTERFACE_CTRL4_REG	0x67
+
+/* Audio Interface Control Register 5 */
+#define SP_AUD_INTERFACE_CTRL5_REG	0x68
+
+/* Audio Interface Control Register 6 */
+#define SP_AUD_INTERFACE_CTRL6_REG	0x69
+
+/* Firmware Version Register */
+#define SP_FW_VER_REG			0xb7
+
+#endif
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
new file mode 100644
index 000000000000..fe40bab21530
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ */
+#include <linux/regmap.h>
+
+#include <drm/drm.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_print.h>
+
+#include "analogix-i2c-dptx.h"
+
+#define AUX_WAIT_TIMEOUT_MS	15
+#define AUX_CH_BUFFER_SIZE	16
+
+static int anx_i2c_dp_clear_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, 0);
+}
+
+static bool anx_dp_aux_op_finished(struct regmap *map_dptx)
+{
+	unsigned int value;
+	int err;
+
+	err = regmap_read(map_dptx, SP_DP_AUX_CH_CTRL2_REG, &value);
+	if (err < 0)
+		return false;
+
+	return (value & SP_AUX_EN) == 0;
+}
+
+static int anx_dp_aux_wait(struct regmap *map_dptx)
+{
+	unsigned long timeout;
+	unsigned int status;
+	int err;
+
+	timeout = jiffies + msecs_to_jiffies(AUX_WAIT_TIMEOUT_MS) + 1;
+
+	while (!anx_dp_aux_op_finished(map_dptx)) {
+		if (time_after(jiffies, timeout)) {
+			if (!anx_dp_aux_op_finished(map_dptx)) {
+				DRM_ERROR("Timed out waiting AUX to finish\n");
+				return -ETIMEDOUT;
+			}
+
+			break;
+		}
+
+		usleep_range(1000, 2000);
+	}
+
+	/* Read the AUX channel access status */
+	err = regmap_read(map_dptx, SP_AUX_CH_STATUS_REG, &status);
+	if (err < 0) {
+		DRM_ERROR("Failed to read from AUX channel: %d\n", err);
+		return err;
+	}
+
+	if (status & SP_AUX_STATUS) {
+		DRM_ERROR("Failed to wait for AUX channel (status: %02x)\n",
+			  status);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int anx_dp_aux_address(struct regmap *map_dptx, unsigned int addr)
+{
+	int err;
+
+	err = regmap_write(map_dptx, SP_AUX_ADDR_7_0_REG, addr & 0xff);
+	if (err)
+		return err;
+
+	err = regmap_write(map_dptx, SP_AUX_ADDR_15_8_REG,
+			   (addr & 0xff00) >> 8);
+	if (err)
+		return err;
+
+	/*
+	 * DP AUX CH Address Register #2, only update bits[3:0]
+	 * [7:4] RESERVED
+	 * [3:0] AUX_ADDR[19:16], Register control AUX CH address.
+	 */
+	err = regmap_update_bits(map_dptx, SP_AUX_ADDR_19_16_REG,
+				 SP_AUX_ADDR_19_16_MASK,
+				 (addr & 0xf0000) >> 16);
+
+	if (err)
+		return err;
+
+	return 0;
+}
+
+ssize_t anx_dp_aux_transfer(struct regmap *map_dptx,
+				struct drm_dp_aux_msg *msg)
+{
+	u8 ctrl1 = msg->request;
+	u8 ctrl2 = SP_AUX_EN;
+	u8 *buffer = msg->buffer;
+	int err;
+
+	/* The DP AUX transmit and receive buffer has 16 bytes. */
+	if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE))
+		return -E2BIG;
+
+	/* Zero-sized messages specify address-only transactions. */
+	if (msg->size < 1)
+		ctrl2 |= SP_ADDR_ONLY;
+	else	/* For non-zero-sized set the length field. */
+		ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
+
+	if ((msg->size > 0) && ((msg->request & DP_AUX_I2C_READ) == 0)) {
+		/* When WRITE | MOT write values to data buffer */
+		err = regmap_bulk_write(map_dptx,
+					SP_DP_BUF_DATA0_REG, buffer,
+					msg->size);
+		if (err)
+			return err;
+	}
+
+	/* Write address and request */
+	err = anx_dp_aux_address(map_dptx, msg->address);
+	if (err)
+		return err;
+
+	err = regmap_write(map_dptx, SP_DP_AUX_CH_CTRL1_REG, ctrl1);
+	if (err)
+		return err;
+
+	/* Start transaction */
+	err = regmap_update_bits(map_dptx, SP_DP_AUX_CH_CTRL2_REG,
+				 SP_ADDR_ONLY | SP_AUX_EN, ctrl2);
+	if (err)
+		return err;
+
+	err = anx_dp_aux_wait(map_dptx);
+	if (err)
+		return err;
+
+	msg->reply = DP_AUX_I2C_REPLY_ACK;
+
+	if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) {
+		/* Read values from data buffer */
+		err = regmap_bulk_read(map_dptx,
+				       SP_DP_BUF_DATA0_REG, buffer,
+				       msg->size);
+		if (err)
+			return err;
+	}
+
+	err = anx_i2c_dp_clear_bits(map_dptx, SP_DP_AUX_CH_CTRL2_REG,
+				    SP_ADDR_ONLY);
+	if (err)
+		return err;
+
+	return msg->size;
+}
+EXPORT_SYMBOL_GPL(anx_dp_aux_transfer);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
new file mode 100644
index 000000000000..663c4bea6e70
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
@@ -0,0 +1,256 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ */
+#ifndef _ANALOGIX_I2C_DPTX_H_
+#define _ANALOGIX_I2C_DPTX_H_
+
+/***************************************************************/
+/* Register definitions for TX_P0                              */
+/***************************************************************/
+
+/* HDCP Status Register */
+#define SP_TX_HDCP_STATUS_REG		0x00
+#define SP_AUTH_FAIL			BIT(5)
+#define SP_AUTHEN_PASS			BIT(1)
+
+/* HDCP Control Register 0 */
+#define SP_HDCP_CTRL0_REG		0x01
+#define SP_RX_REPEATER			BIT(6)
+#define SP_RE_AUTH			BIT(5)
+#define SP_SW_AUTH_OK			BIT(4)
+#define SP_HARD_AUTH_EN			BIT(3)
+#define SP_HDCP_ENC_EN			BIT(2)
+#define SP_BKSV_SRM_PASS		BIT(1)
+#define SP_KSVLIST_VLD			BIT(0)
+/* HDCP Function Enabled */
+#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+/* HDCP Receiver BSTATUS Register 0 */
+#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
+/* HDCP Receiver BSTATUS Register 1 */
+#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
+
+/* HDCP Embedded "Blue Screen" Content Registers */
+#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
+#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
+#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
+
+/* HDCP Wait R0 Timing Register */
+#define SP_HDCP_WAIT_R0_TIME_REG	0x40
+
+/* HDCP Link Integrity Check Timer Register */
+#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
+
+/* HDCP Repeater Ready Wait Timer Register */
+#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
+
+/* HDCP Auto Timer Register */
+#define SP_HDCP_AUTO_TIMER_REG		0x51
+
+/* HDCP Key Status Register */
+#define SP_HDCP_KEY_STATUS_REG		0x5e
+
+/* HDCP Key Command Register */
+#define SP_HDCP_KEY_COMMAND_REG		0x5f
+#define SP_DISABLE_SYNC_HDCP		BIT(2)
+
+/* OTP Memory Key Protection Registers */
+#define SP_OTP_KEY_PROTECT1_REG		0x60
+#define SP_OTP_KEY_PROTECT2_REG		0x61
+#define SP_OTP_KEY_PROTECT3_REG		0x62
+#define SP_OTP_PSW1			0xa2
+#define SP_OTP_PSW2			0x7e
+#define SP_OTP_PSW3			0xc6
+
+/* DP System Control Registers */
+#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
+/* Bits for DP System Control Register 2 */
+#define SP_CHA_STA			BIT(2)
+/* Bits for DP System Control Register 3 */
+#define SP_HPD_STATUS			BIT(6)
+#define SP_HPD_FORCE			BIT(5)
+#define SP_HPD_CTRL			BIT(4)
+#define SP_STRM_VALID			BIT(2)
+#define SP_STRM_FORCE			BIT(1)
+#define SP_STRM_CTRL			BIT(0)
+/* Bits for DP System Control Register 4 */
+#define SP_ENHANCED_MODE		BIT(3)
+
+/* DP Video Control Register */
+#define SP_DP_VIDEO_CTRL_REG		0x84
+#define SP_COLOR_F_MASK			0x06
+#define SP_COLOR_F_SHIFT		1
+#define SP_BPC_MASK			0xe0
+#define SP_BPC_SHIFT			5
+#  define SP_BPC_6BITS			0x00
+#  define SP_BPC_8BITS			0x01
+#  define SP_BPC_10BITS			0x02
+#  define SP_BPC_12BITS			0x03
+
+/* DP Audio Control Register */
+#define SP_DP_AUDIO_CTRL_REG		0x87
+#define SP_AUD_EN			BIT(0)
+
+/* 10us Pulse Generate Timer Registers */
+#define SP_I2C_GEN_10US_TIMER0_REG	0x88
+#define SP_I2C_GEN_10US_TIMER1_REG	0x89
+
+/* Packet Send Control Register */
+#define SP_PACKET_SEND_CTRL_REG		0x90
+#define SP_AUD_IF_UP			BIT(7)
+#define SP_AVI_IF_UD			BIT(6)
+#define SP_MPEG_IF_UD			BIT(5)
+#define SP_SPD_IF_UD			BIT(4)
+#define SP_AUD_IF_EN			BIT(3)
+#define SP_AVI_IF_EN			BIT(2)
+#define SP_MPEG_IF_EN			BIT(1)
+#define SP_SPD_IF_EN			BIT(0)
+
+/* DP HDCP Control Register */
+#define SP_DP_HDCP_CTRL_REG		0x92
+#define SP_AUTO_EN			BIT(7)
+#define SP_AUTO_START			BIT(5)
+#define SP_LINK_POLLING			BIT(1)
+
+/* DP Main Link Bandwidth Setting Register */
+#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
+#define SP_LINK_BW_SET_MASK		0x1f
+#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
+
+/* DP Lane Count Setting Register */
+#define SP_DP_LANE_COUNT_SET_REG	0xa1
+
+/* DP Training Pattern Set Register */
+#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
+
+/* DP Lane 0 Link Training Control Register */
+#define SP_DP_LANE0_LT_CTRL_REG		0xa3
+#define SP_TX_SW_SET_MASK		0x1b
+#define SP_MAX_PRE_REACH		BIT(5)
+#define SP_MAX_DRIVE_REACH		BIT(4)
+#define SP_PRE_EMP_LEVEL1		BIT(3)
+#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
+
+/* DP Link Training Control Register */
+#define SP_DP_LT_CTRL_REG		0xa8
+#define SP_DP_LT_INPROGRESS		0x80
+#define SP_LT_ERROR_TYPE_MASK		0x70
+#  define SP_LT_NO_ERROR		0x00
+#  define SP_LT_AUX_WRITE_ERROR		0x01
+#  define SP_LT_MAX_DRIVE_REACHED	0x02
+#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
+#  define SP_LT_LOOP_SAME_5_TIME	0x04
+#  define SP_LT_CR_FAIL_IN_EQ		0x05
+#  define SP_LT_EQ_LOOP_5_TIME		0x06
+#define SP_LT_EN			BIT(0)
+
+/* DP CEP Training Control Registers */
+#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
+#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
+
+/* DP Debug Register 1 */
+#define SP_DP_DEBUG1_REG		0xb0
+#define SP_DEBUG_PLL_LOCK		BIT(4)
+#define SP_POLLING_EN			BIT(1)
+
+/* DP Polling Control Register */
+#define SP_DP_POLLING_CTRL_REG		0xb4
+#define SP_AUTO_POLLING_DISABLE		BIT(0)
+
+/* DP Link Debug Control Register */
+#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
+#define SP_M_VID_DEBUG			BIT(5)
+#define SP_NEW_PRBS7			BIT(4)
+#define SP_INSERT_ER			BIT(1)
+#define SP_PRBS31_EN			BIT(0)
+
+/* AUX Misc control Register */
+#define SP_AUX_MISC_CTRL_REG		0xbf
+
+/* DP PLL control Register */
+#define SP_DP_PLL_CTRL_REG		0xc7
+#define SP_PLL_RST			BIT(6)
+
+/* DP Analog Power Down Register */
+#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
+#define SP_CH0_PD			BIT(0)
+
+/* DP Misc Control Register */
+#define SP_DP_MISC_CTRL_REG		0xcd
+#define SP_EQ_TRAINING_LOOP		BIT(6)
+
+/* DP Extra I2C Device Address Register */
+#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
+#define SP_I2C_STRETCH_DISABLE		BIT(7)
+
+#define SP_I2C_EXTRA_ADDR		0x50
+
+/* DP Downspread Control Register 1 */
+#define SP_DP_DOWNSPREAD_CTRL1_REG	0xd0
+
+/* DP M Value Calculation Control Register */
+#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
+#define SP_M_GEN_CLK_SEL		BIT(0)
+
+/* AUX Channel Access Status Register */
+#define SP_AUX_CH_STATUS_REG		0xe0
+#define SP_AUX_STATUS			0x0f
+
+/* AUX Channel DEFER Control Register */
+#define SP_AUX_DEFER_CTRL_REG		0xe2
+#define SP_DEFER_CTRL_EN		BIT(7)
+
+/* DP Buffer Data Count Register */
+#define SP_BUF_DATA_COUNT_REG		0xe4
+#define SP_BUF_DATA_COUNT_MASK		0x1f
+#define SP_BUF_CLR			BIT(7)
+
+/* DP AUX Channel Control Register 1 */
+#define SP_DP_AUX_CH_CTRL1_REG		0xe5
+#define SP_AUX_TX_COMM_MASK		0x0f
+#define SP_AUX_LENGTH_MASK		0xf0
+#define SP_AUX_LENGTH_SHIFT		4
+
+/* DP AUX CH Address Register 0 */
+#define SP_AUX_ADDR_7_0_REG		0xe6
+
+/* DP AUX CH Address Register 1 */
+#define SP_AUX_ADDR_15_8_REG		0xe7
+
+/* DP AUX CH Address Register 2 */
+#define SP_AUX_ADDR_19_16_REG		0xe8
+#define SP_AUX_ADDR_19_16_MASK		0x0f
+
+/* DP AUX Channel Control Register 2 */
+#define SP_DP_AUX_CH_CTRL2_REG		0xe9
+#define SP_AUX_SEL_RXCM			BIT(6)
+#define SP_AUX_CHSEL			BIT(3)
+#define SP_AUX_PN_INV			BIT(2)
+#define SP_ADDR_ONLY			BIT(1)
+#define SP_AUX_EN			BIT(0)
+
+/* DP Video Stream Control InfoFrame Register */
+#define SP_DP_3D_VSC_CTRL_REG		0xea
+#define SP_INFO_FRAME_VSC_EN		BIT(0)
+
+/* DP Video Stream Data Byte 1 Register */
+#define SP_DP_VSC_DB1_REG		0xeb
+
+/* DP AUX Channel Control Register 3 */
+#define SP_DP_AUX_CH_CTRL3_REG		0xec
+#define SP_WAIT_COUNTER_7_0_MASK	0xff
+
+/* DP AUX Channel Control Register 4 */
+#define SP_DP_AUX_CH_CTRL4_REG		0xed
+
+/* DP AUX Buffer Data Registers */
+#define SP_DP_BUF_DATA0_REG		0xf0
+
+ssize_t anx_dp_aux_transfer(struct regmap *map_dptx,
+				struct drm_dp_aux_msg *msg);
+
+#endif
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
new file mode 100644
index 000000000000..3c843497d835
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
@@ -0,0 +1,234 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
+ */
+#ifndef _ANALOGIX_I2C_TXCOMMON_H_
+#define _ANALOGIX_I2C_TXCOMMON_H_
+
+/***************************************************************/
+/* Register definitions for TX_P2                              */
+/***************************************************************/
+
+/*
+ * Core Register Definitions
+ */
+
+/* Device ID Low Byte Register */
+#define SP_DEVICE_IDL_REG		0x02
+
+/* Device ID High Byte Register */
+#define SP_DEVICE_IDH_REG		0x03
+
+/* Device version register */
+#define SP_DEVICE_VERSION_REG		0x04
+
+/* Power Down Control Register */
+#define SP_POWERDOWN_CTRL_REG		0x05
+#define SP_REGISTER_PD			BIT(7)
+#define SP_HDCP_PD			BIT(5)
+#define SP_AUDIO_PD			BIT(4)
+#define SP_VIDEO_PD			BIT(3)
+#define SP_LINK_PD			BIT(2)
+#define SP_TOTAL_PD			BIT(1)
+
+/* Reset Control Register 1 */
+#define SP_RESET_CTRL1_REG		0x06
+#define SP_MISC_RST			BIT(7)
+#define SP_VIDCAP_RST			BIT(6)
+#define SP_VIDFIF_RST			BIT(5)
+#define SP_AUDFIF_RST			BIT(4)
+#define SP_AUDCAP_RST			BIT(3)
+#define SP_HDCP_RST			BIT(2)
+#define SP_SW_RST			BIT(1)
+#define SP_HW_RST			BIT(0)
+
+/* Reset Control Register 2 */
+#define SP_RESET_CTRL2_REG		0x07
+#define SP_AUX_RST			BIT(2)
+#define SP_SERDES_FIFO_RST		BIT(1)
+#define SP_I2C_REG_RST			BIT(0)
+
+/* Video Control Register 1 */
+#define SP_VID_CTRL1_REG		0x08
+#define SP_VIDEO_EN			BIT(7)
+#define SP_VIDEO_MUTE			BIT(2)
+#define SP_DE_GEN			BIT(1)
+#define SP_DEMUX			BIT(0)
+
+/* Video Control Register 2 */
+#define SP_VID_CTRL2_REG		0x09
+#define SP_IN_COLOR_F_MASK		0x03
+#define SP_IN_YC_BIT_SEL		BIT(2)
+#define SP_IN_BPC_MASK			0x70
+#define SP_IN_BPC_SHIFT			4
+#  define SP_IN_BPC_12BIT		0x03
+#  define SP_IN_BPC_10BIT		0x02
+#  define SP_IN_BPC_8BIT		0x01
+#  define SP_IN_BPC_6BIT		0x00
+#define SP_IN_D_RANGE			BIT(7)
+
+/* Video Control Register 3 */
+#define SP_VID_CTRL3_REG		0x0a
+#define SP_HPD_OUT			BIT(6)
+
+/* Video Control Register 5 */
+#define SP_VID_CTRL5_REG		0x0c
+#define SP_CSC_STD_SEL			BIT(7)
+#define SP_XVYCC_RNG_LMT		BIT(6)
+#define SP_RANGE_Y2R			BIT(5)
+#define SP_CSPACE_Y2R			BIT(4)
+#define SP_RGB_RNG_LMT			BIT(3)
+#define SP_Y_RNG_LMT			BIT(2)
+#define SP_RANGE_R2Y			BIT(1)
+#define SP_CSPACE_R2Y			BIT(0)
+
+/* Video Control Register 6 */
+#define SP_VID_CTRL6_REG		0x0d
+#define SP_TEST_PATTERN_EN		BIT(7)
+#define SP_VIDEO_PROCESS_EN		BIT(6)
+#define SP_VID_US_MODE			BIT(3)
+#define SP_VID_DS_MODE			BIT(2)
+#define SP_UP_SAMPLE			BIT(1)
+#define SP_DOWN_SAMPLE			BIT(0)
+
+/* Video Control Register 8 */
+#define SP_VID_CTRL8_REG		0x0f
+#define SP_VID_VRES_TH			BIT(0)
+
+/* Total Line Status Low Byte Register */
+#define SP_TOTAL_LINE_STAL_REG		0x24
+
+/* Total Line Status High Byte Register */
+#define SP_TOTAL_LINE_STAH_REG		0x25
+
+/* Active Line Status Low Byte Register */
+#define SP_ACT_LINE_STAL_REG		0x26
+
+/* Active Line Status High Byte Register */
+#define SP_ACT_LINE_STAH_REG		0x27
+
+/* Vertical Front Porch Status Register */
+#define SP_V_F_PORCH_STA_REG		0x28
+
+/* Vertical SYNC Width Status Register */
+#define SP_V_SYNC_STA_REG		0x29
+
+/* Vertical Back Porch Status Register */
+#define SP_V_B_PORCH_STA_REG		0x2a
+
+/* Total Pixel Status Low Byte Register */
+#define SP_TOTAL_PIXEL_STAL_REG		0x2b
+
+/* Total Pixel Status High Byte Register */
+#define SP_TOTAL_PIXEL_STAH_REG		0x2c
+
+/* Active Pixel Status Low Byte Register */
+#define SP_ACT_PIXEL_STAL_REG		0x2d
+
+/* Active Pixel Status High Byte Register */
+#define SP_ACT_PIXEL_STAH_REG		0x2e
+
+/* Horizontal Front Porch Status Low Byte Register */
+#define SP_H_F_PORCH_STAL_REG		0x2f
+
+/* Horizontal Front Porch Statys High Byte Register */
+#define SP_H_F_PORCH_STAH_REG		0x30
+
+/* Horizontal SYNC Width Status Low Byte Register */
+#define SP_H_SYNC_STAL_REG		0x31
+
+/* Horizontal SYNC Width Status High Byte Register */
+#define SP_H_SYNC_STAH_REG		0x32
+
+/* Horizontal Back Porch Status Low Byte Register */
+#define SP_H_B_PORCH_STAL_REG		0x33
+
+/* Horizontal Back Porch Status High Byte Register */
+#define SP_H_B_PORCH_STAH_REG		0x34
+
+/* InfoFrame AVI Packet DB1 Register */
+#define SP_INFOFRAME_AVI_DB1_REG	0x70
+
+/* Bit Control Specific Register */
+#define SP_BIT_CTRL_SPECIFIC_REG	0x80
+#define SP_BIT_CTRL_SELECT_SHIFT	1
+#define SP_ENABLE_BIT_CTRL		BIT(0)
+
+/* InfoFrame Audio Packet DB1 Register */
+#define SP_INFOFRAME_AUD_DB1_REG	0x83
+
+/* InfoFrame MPEG Packet DB1 Register */
+#define SP_INFOFRAME_MPEG_DB1_REG	0xb0
+
+/* Audio Channel Status Registers */
+#define SP_AUD_CH_STATUS_BASE		0xd0
+
+/* Audio Channel Num Register 5 */
+#define SP_I2S_CHANNEL_NUM_MASK		0xe0
+#  define SP_I2S_CH_NUM_1		(0x00 << 5)
+#  define SP_I2S_CH_NUM_2		(0x01 << 5)
+#  define SP_I2S_CH_NUM_3		(0x02 << 5)
+#  define SP_I2S_CH_NUM_4		(0x03 << 5)
+#  define SP_I2S_CH_NUM_5		(0x04 << 5)
+#  define SP_I2S_CH_NUM_6		(0x05 << 5)
+#  define SP_I2S_CH_NUM_7		(0x06 << 5)
+#  define SP_I2S_CH_NUM_8		(0x07 << 5)
+#define SP_EXT_VUCP			BIT(2)
+#define SP_VBIT				BIT(1)
+#define SP_AUDIO_LAYOUT			BIT(0)
+
+/* Analog Debug Register 1 */
+#define SP_ANALOG_DEBUG1_REG		0xdc
+
+/* Analog Debug Register 2 */
+#define SP_ANALOG_DEBUG2_REG		0xdd
+#define SP_FORCE_SW_OFF_BYPASS		0x20
+#define SP_XTAL_FRQ			0x1c
+#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
+#  define SP_XTAL_FRQ_24M		(0x01 << 2)
+#  define SP_XTAL_FRQ_25M		(0x02 << 2)
+#  define SP_XTAL_FRQ_26M		(0x03 << 2)
+#  define SP_XTAL_FRQ_27M		(0x04 << 2)
+#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
+#  define SP_XTAL_FRQ_52M		(0x06 << 2)
+#define SP_POWERON_TIME_1P5MS		0x03
+
+/* Analog Control 0 Register */
+#define SP_ANALOG_CTRL0_REG		0xe1
+
+/* Common Interrupt Status Register 1 */
+#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
+#define SP_PLL_LOCK_CHG			0x40
+
+/* Common Interrupt Status Register 2 */
+#define SP_COMMON_INT_STATUS2		0xf2
+#define SP_HDCP_AUTH_CHG		BIT(1)
+#define SP_HDCP_AUTH_DONE		BIT(0)
+
+#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
+
+/* Common Interrupt Status Register 4 */
+#define SP_COMMON_INT_STATUS4_REG	0xf4
+#define SP_HPD_IRQ			BIT(6)
+#define SP_HPD_ESYNC_ERR		BIT(4)
+#define SP_HPD_CHG			BIT(2)
+#define SP_HPD_LOST			BIT(1)
+#define SP_HPD_PLUG			BIT(0)
+
+/* DP Interrupt Status Register */
+#define SP_DP_INT_STATUS1_REG		0xf7
+#define SP_TRAINING_FINISH		BIT(5)
+#define SP_POLLING_ERR			BIT(4)
+
+/* Common Interrupt Mask Register */
+#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
+
+#define SP_COMMON_INT_MASK4_REG		0xfb
+
+/* DP Interrupts Mask Register */
+#define SP_DP_INT_MASK1_REG		0xfe
+
+/* Interrupt Control Register */
+#define SP_INT_CTRL_REG			0xff
+
+#endif /* _ANALOGIX_I2C_TXCOMMON_H_ */
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index bb411fe52ae8..6effe532f820 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1111,7 +1111,7 @@ static int analogix_dp_get_modes(struct drm_connector *connector)
 	int ret, num_modes = 0;
 
 	if (dp->plat_data->panel) {
-		num_modes += drm_panel_get_modes(dp->plat_data->panel);
+		num_modes += drm_panel_get_modes(dp->plat_data->panel, connector);
 	} else {
 		ret = analogix_dp_prepare_panel(dp, true, false);
 		if (ret) {
diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c
index f4e293e7cf64..f66777e24968 100644
--- a/drivers/gpu/drm/bridge/panel.c
+++ b/drivers/gpu/drm/bridge/panel.c
@@ -37,7 +37,7 @@ static int panel_bridge_connector_get_modes(struct drm_connector *connector)
 	struct panel_bridge *panel_bridge =
 		drm_connector_to_panel_bridge(connector);
 
-	return drm_panel_get_modes(panel_bridge->panel);
+	return drm_panel_get_modes(panel_bridge->panel, connector);
 }
 
 static const struct drm_connector_helper_funcs
@@ -289,3 +289,21 @@ struct drm_bridge *devm_drm_panel_bridge_add_typed(struct device *dev,
 	return bridge;
 }
 EXPORT_SYMBOL(devm_drm_panel_bridge_add_typed);
+
+/**
+ * drm_panel_bridge_connector - return the connector for the panel bridge
+ *
+ * drm_panel_bridge creates the connector.
+ * This function gives external access to the connector.
+ *
+ * Returns: Pointer to drm_connector
+ */
+struct drm_connector *drm_panel_bridge_connector(struct drm_bridge *bridge)
+{
+	struct panel_bridge *panel_bridge;
+
+	panel_bridge = drm_bridge_to_panel_bridge(bridge);
+
+	return &panel_bridge->connector;
+}
+EXPORT_SYMBOL(drm_panel_bridge_connector);
diff --git a/drivers/gpu/drm/bridge/parade-ps8622.c b/drivers/gpu/drm/bridge/parade-ps8622.c
index b7a72dfdcac3..10c47c008b40 100644
--- a/drivers/gpu/drm/bridge/parade-ps8622.c
+++ b/drivers/gpu/drm/bridge/parade-ps8622.c
@@ -461,7 +461,7 @@ static int ps8622_get_modes(struct drm_connector *connector)
 
 	ps8622 = connector_to_ps8622(connector);
 
-	return drm_panel_get_modes(ps8622->panel);
+	return drm_panel_get_modes(ps8622->panel, connector);
 }
 
 static const struct drm_connector_helper_funcs ps8622_connector_helper_funcs = {
diff --git a/drivers/gpu/drm/bridge/tc358764.c b/drivers/gpu/drm/bridge/tc358764.c
index db298f550a5a..96207fcfde19 100644
--- a/drivers/gpu/drm/bridge/tc358764.c
+++ b/drivers/gpu/drm/bridge/tc358764.c
@@ -282,7 +282,7 @@ static int tc358764_get_modes(struct drm_connector *connector)
 {
 	struct tc358764 *ctx = connector_to_tc358764(connector);
 
-	return drm_panel_get_modes(ctx->panel);
+	return drm_panel_get_modes(ctx->panel, connector);
 }
 
 static const
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 8029478ffebb..3709e5ace724 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1346,7 +1346,7 @@ static int tc_connector_get_modes(struct drm_connector *connector)
 		return 0;
 	}
 
-	count = drm_panel_get_modes(tc->panel);
+	count = drm_panel_get_modes(tc->panel, connector);
 	if (count > 0)
 		return count;
 
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 43abf01ebd4c..9a2dd986afa5 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -206,7 +206,7 @@ static int ti_sn_bridge_connector_get_modes(struct drm_connector *connector)
 {
 	struct ti_sn_bridge *pdata = connector_to_ti_sn_bridge(connector);
 
-	return drm_panel_get_modes(pdata->panel);
+	return drm_panel_get_modes(pdata->panel, connector);
 }
 
 static enum drm_mode_status