Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

1 files changed, 103 insertions, 2 deletions

diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 4b11202061be..bbccd514d3ec 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -19,6 +19,7 @@
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/mfd/core.h>
+#include <linux/delay.h>
 #include "stmpe.h"
 
 static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
@@ -643,6 +644,88 @@ static struct stmpe_variant_info stmpe1601 = {
 };
 
 /*
+ * STMPE1801
+ */
+static const u8 stmpe1801_regs[] = {
+	[STMPE_IDX_CHIP_ID]	= STMPE1801_REG_CHIP_ID,
+	[STMPE_IDX_ICR_LSB]	= STMPE1801_REG_INT_CTRL_LOW,
+	[STMPE_IDX_IER_LSB]	= STMPE1801_REG_INT_EN_MASK_LOW,
+	[STMPE_IDX_ISR_LSB]	= STMPE1801_REG_INT_STA_LOW,
+	[STMPE_IDX_GPMR_LSB]	= STMPE1801_REG_GPIO_MP_LOW,
+	[STMPE_IDX_GPSR_LSB]	= STMPE1801_REG_GPIO_SET_LOW,
+	[STMPE_IDX_GPCR_LSB]	= STMPE1801_REG_GPIO_CLR_LOW,
+	[STMPE_IDX_GPDR_LSB]	= STMPE1801_REG_GPIO_SET_DIR_LOW,
+	[STMPE_IDX_GPRER_LSB]	= STMPE1801_REG_GPIO_RE_LOW,
+	[STMPE_IDX_GPFER_LSB]	= STMPE1801_REG_GPIO_FE_LOW,
+	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
+	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1801_REG_INT_STA_GPIO_LOW,
+};
+
+static struct stmpe_variant_block stmpe1801_blocks[] = {
+	{
+		.cell	= &stmpe_gpio_cell,
+		.irq	= STMPE1801_IRQ_GPIOC,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+	{
+		.cell	= &stmpe_keypad_cell,
+		.irq	= STMPE1801_IRQ_KEYPAD,
+		.block	= STMPE_BLOCK_KEYPAD,
+	},
+};
+
+static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
+			    bool enable)
+{
+	unsigned int mask = 0;
+	if (blocks & STMPE_BLOCK_GPIO)
+		mask |= STMPE1801_MSK_INT_EN_GPIO;
+
+	if (blocks & STMPE_BLOCK_KEYPAD)
+		mask |= STMPE1801_MSK_INT_EN_KPC;
+
+	return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
+				enable ? mask : 0);
+}
+
+static int stmpe1801_reset(struct stmpe *stmpe)
+{
+	unsigned long timeout;
+	int ret = 0;
+
+	ret = __stmpe_set_bits(stmpe, STMPE1801_REG_SYS_CTRL,
+		STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET);
+	if (ret < 0)
+		return ret;
+
+	timeout = jiffies + msecs_to_jiffies(100);
+	while (time_before(jiffies, timeout)) {
+		ret = __stmpe_reg_read(stmpe, STMPE1801_REG_SYS_CTRL);
+		if (ret < 0)
+			return ret;
+		if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
+			return 0;
+		usleep_range(100, 200);
+	};
+	return -EIO;
+}
+
+static struct stmpe_variant_info stmpe1801 = {
+	.name		= "stmpe1801",
+	.id_val		= STMPE1801_ID,
+	.id_mask	= 0xfff0,
+	.num_gpios	= 18,
+	.af_bits	= 0,
+	.regs		= stmpe1801_regs,
+	.blocks		= stmpe1801_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe1801_blocks),
+	.num_irqs	= STMPE1801_NR_INTERNAL_IRQS,
+	.enable		= stmpe1801_enable,
+	/* stmpe1801 do not have any gpio alternate function */
+	.get_altfunc	= NULL,
+};
+
+/*
  * STMPE24XX
  */
 
@@ -740,6 +823,7 @@ static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
 	[STMPE801]	= &stmpe801,
 	[STMPE811]	= &stmpe811,
 	[STMPE1601]	= &stmpe1601,
+	[STMPE1801]	= &stmpe1801,
 	[STMPE2401]	= &stmpe2401,
 	[STMPE2403]	= &stmpe2403,
 };
@@ -759,7 +843,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 	struct stmpe *stmpe = data;
 	struct stmpe_variant_info *variant = stmpe->variant;
 	int num = DIV_ROUND_UP(variant->num_irqs, 8);
-	u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
+	u8 israddr;
 	u8 isr[num];
 	int ret;
 	int i;
@@ -771,6 +855,11 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 		return IRQ_HANDLED;
 	}
 
+	if (variant->id_val == STMPE1801_ID)
+		israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
+	else
+		israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
+
 	ret = stmpe_block_read(stmpe, israddr, num, isr);
 	if (ret < 0)
 		return IRQ_NONE;
@@ -938,6 +1027,12 @@ static int stmpe_chip_init(struct stmpe *stmpe)
 	if (ret)
 		return ret;
 
+	if (id == STMPE1801_ID)	{
+		ret =  stmpe1801_reset(stmpe);
+		if (ret < 0)
+			return ret;
+	}
+
 	if (stmpe->irq >= 0) {
 		if (id == STMPE801_ID)
 			icr = STMPE801_REG_SYS_CTRL_INT_EN;
@@ -1015,7 +1110,10 @@ void stmpe_of_probe(struct stmpe_platform_data *pdata, struct device_node *np)
 {
 	struct device_node *child;
 
-	pdata->id = -1;
+	pdata->id = of_alias_get_id(np, "stmpe-i2c");
+	if (pdata->id < 0)
+		pdata->id = -1;
+
 	pdata->irq_trigger = IRQF_TRIGGER_NONE;
 
 	of_property_read_u32(np, "st,autosleep-timeout",
@@ -1057,6 +1155,9 @@ int stmpe_probe(struct stmpe_client_info *ci, int partnum)
 			return -ENOMEM;
 
 		stmpe_of_probe(pdata, np);
+
+		if (of_find_property(np, "interrupts", NULL) == NULL)
+			ci->irq = -1;
 	}
 
 	stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);