summaryrefslogtreecommitdiff
path: root/drivers/net/tulip
diff options
context:
space:
mode:
authorAuke Kok <auke-jan.h.kok@intel.com>2007-06-08 15:46:36 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2007-07-11 16:02:10 -0700
commit44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (patch)
tree6e16d3ec80c87490dc743f72da086356f2906ace /drivers/net/tulip
parentb8a3a5214d7cc115f1ca3a3967b7229d97c46f4a (diff)
downloadlinux-next-44c10138fd4bbc4b6d6bff0873c24902f2a9da65.tar.gz
PCI: Change all drivers to use pci_device->revision
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/net/tulip')
-rw-r--r--drivers/net/tulip/de4x5.c8
-rw-r--r--drivers/net/tulip/dmfe.c26
-rw-r--r--drivers/net/tulip/tulip_core.c13
-rw-r--r--drivers/net/tulip/xircom_cb.c5
-rw-r--r--drivers/net/tulip/xircom_tulip_cb.c4
5 files changed, 22 insertions, 34 deletions
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index 42fca26afc50..09902891a6e6 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -2134,7 +2134,7 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
u_short vendor, status;
u_int irq = 0, device;
u_long iobase = 0; /* Clear upper 32 bits in Alphas */
- int i, j, cfrv;
+ int i, j;
struct de4x5_private *lp = netdev_priv(dev);
struct list_head *walk;
@@ -2150,7 +2150,6 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
/* Get the chip configuration revision register */
pb = this_dev->bus->number;
- pci_read_config_dword(this_dev, PCI_REVISION_ID, &cfrv);
/* Set the device number information */
lp->device = PCI_SLOT(this_dev->devfn);
@@ -2158,7 +2157,8 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
/* Set the chipset information */
if (is_DC2114x) {
- device = ((cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
+ device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK
+ ? DC21142 : DC21143);
}
lp->chipset = device;
@@ -2254,7 +2254,7 @@ static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
}
/* Get the chip configuration revision register */
- pci_read_config_dword(pdev, PCI_REVISION_ID, &lp->cfrv);
+ lp->cfrv = pdev->revision;
/* Set the device number information */
lp->device = dev_num;
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 4ed67ff0e81e..dab74feb44bc 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -181,11 +181,12 @@
udelay(5);
#define __CHK_IO_SIZE(pci_id, dev_rev) \
- (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? \
+ (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \
DM9102A_IO_SIZE: DM9102_IO_SIZE)
-#define CHK_IO_SIZE(pci_dev, dev_rev) \
- (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev))
+#define CHK_IO_SIZE(pci_dev) \
+ (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \
+ (pci_dev)->revision))
/* Sten Check */
#define DEVICE net_device
@@ -205,7 +206,7 @@ struct rx_desc {
struct dmfe_board_info {
u32 chip_id; /* Chip vendor/Device ID */
- u32 chip_revision; /* Chip revision */
+ u8 chip_revision; /* Chip revision */
struct DEVICE *next_dev; /* next device */
struct pci_dev *pdev; /* PCI device */
spinlock_t lock;
@@ -359,7 +360,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
{
struct dmfe_board_info *db; /* board information structure */
struct net_device *dev;
- u32 dev_rev, pci_pmr;
+ u32 pci_pmr;
int i, err;
DMFE_DBUG(0, "dmfe_init_one()", 0);
@@ -392,10 +393,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
goto err_out_disable;
}
- /* Read Chip revision */
- pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
-
- if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev, dev_rev)) ) {
+ if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) {
printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
err = -ENODEV;
goto err_out_disable;
@@ -433,7 +431,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
db->chip_id = ent->driver_data;
db->ioaddr = pci_resource_start(pdev, 0);
- db->chip_revision = dev_rev;
+ db->chip_revision = pdev->revision;
db->wol_mode = 0;
db->pdev = pdev;
@@ -455,7 +453,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
pci_read_config_dword(pdev, 0x50, &pci_pmr);
pci_pmr &= 0x70000;
- if ( (pci_pmr == 0x10000) && (dev_rev == 0x02000031) )
+ if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) )
db->chip_type = 1; /* DM9102A E3 */
else
db->chip_type = 0;
@@ -553,7 +551,7 @@ static int dmfe_open(struct DEVICE *dev)
/* CR6 operation mode decision */
if ( !chkmode || (db->chip_id == PCI_DM9132_ID) ||
- (db->chip_revision >= 0x02000030) ) {
+ (db->chip_revision >= 0x30) ) {
db->cr6_data |= DMFE_TXTH_256;
db->cr0_data = CR0_DEFAULT;
db->dm910x_chk_mode=4; /* Enter the normal mode */
@@ -1199,9 +1197,9 @@ static void dmfe_timer(unsigned long data)
tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */
if ( ((db->chip_id == PCI_DM9102_ID) &&
- (db->chip_revision == 0x02000030)) ||
+ (db->chip_revision == 0x30)) ||
((db->chip_id == PCI_DM9132_ID) &&
- (db->chip_revision == 0x02000010)) ) {
+ (db->chip_revision == 0x10)) ) {
/* DM9102A Chip */
if (tmp_cr12 & 2)
link_ok = 0;
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 041af63f2811..1a9e911b86a2 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1238,7 +1238,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
};
static int last_irq;
static int multiport_cnt; /* For four-port boards w/one EEPROM */
- u8 chip_rev;
int i, irq;
unsigned short sum;
unsigned char *ee_data;
@@ -1274,10 +1273,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (pdev->vendor == 0x1282 && pdev->device == 0x9100)
{
- u32 dev_rev;
/* Read Chip revision */
- pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
- if(dev_rev < 0x02000030)
+ if (pdev->revision < 0x02000030)
{
printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
return -ENODEV;
@@ -1360,8 +1357,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (!ioaddr)
goto err_out_free_res;
- pci_read_config_byte (pdev, PCI_REVISION_ID, &chip_rev);
-
/*
* initialize private data structure 'tp'
* it is zeroed and aligned in alloc_etherdev
@@ -1382,7 +1377,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
tp->flags = tulip_tbl[chip_idx].flags;
tp->pdev = pdev;
tp->base_addr = ioaddr;
- tp->revision = chip_rev;
+ tp->revision = pdev->revision;
tp->csr0 = csr0;
spin_lock_init(&tp->lock);
spin_lock_init(&tp->mii_lock);
@@ -1399,7 +1394,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
tulip_mwi_config (pdev, dev);
#else
/* MWI is broken for DC21143 rev 65... */
- if (chip_idx == DC21143 && chip_rev == 65)
+ if (chip_idx == DC21143 && pdev->revision == 65)
tp->csr0 &= ~MWI;
#endif
@@ -1640,7 +1635,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
#else
"Port"
#endif
- " %#llx,", dev->name, chip_name, chip_rev,
+ " %#llx,", dev->name, chip_name, pdev->revision,
(unsigned long long) pci_resource_start(pdev, TULIP_BAR));
pci_set_drvdata(pdev, dev);
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 2470b1ee33c0..79943cdd6337 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -205,7 +205,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
{
struct net_device *dev = NULL;
struct xircom_private *private;
- unsigned char chip_rev;
unsigned long flags;
unsigned short tmp16;
enter("xircom_probe");
@@ -224,8 +223,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
pci_read_config_word (pdev,PCI_STATUS, &tmp16);
pci_write_config_word (pdev, PCI_STATUS,tmp16);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
-
if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
return -ENODEV;
@@ -286,7 +283,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
goto reg_fail;
}
- printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, chip_rev, pdev->irq);
+ printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, pdev->revision, pdev->irq);
/* start the transmitter to get a heartbeat */
/* TODO: send 2 dummy packets here */
transceiver_voodoo(private);
diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
index f64172927377..83d69f11892f 100644
--- a/drivers/net/tulip/xircom_tulip_cb.c
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -524,7 +524,6 @@ static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_devi
int chip_idx = id->driver_data;
long ioaddr;
int i;
- u8 chip_rev;
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
@@ -620,9 +619,8 @@ static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_devi
if (register_netdev(dev))
goto err_out_cleardev;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
printk(KERN_INFO "%s: %s rev %d at %#3lx,",
- dev->name, xircom_tbl[chip_idx].chip_name, chip_rev, ioaddr);
+ dev->name, xircom_tbl[chip_idx].chip_name, pdev->revision, ioaddr);
for (i = 0; i < 6; i++)
printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]);
printk(", IRQ %d.\n", dev->irq);