Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 839 insertions, 0 deletions

diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
new file mode 100644
index 000000000000..1e7b47704ad9
--- /dev/null
+++ b/drivers/net/wan/wanxl.c
@@ -0,0 +1,839 @@
+/*
+ * wanXL serial card driver for Linux
+ * host part
+ *
+ * Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Status:
+ *   - Only DTE (external clock) support with NRZ and NRZI encodings
+ *   - wanXL100 will require minor driver modifications, no access to hw
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/hdlc.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#include "wanxl.h"
+
+static const char* version = "wanXL serial card driver version: 0.48";
+
+#define PLX_CTL_RESET   0x40000000 /* adapter reset */
+
+#undef DEBUG_PKT
+#undef DEBUG_PCI
+
+/* MAILBOX #1 - PUTS COMMANDS */
+#define MBX1_CMD_ABORTJ 0x85000000 /* Abort and Jump */
+#ifdef __LITTLE_ENDIAN
+#define MBX1_CMD_BSWAP  0x8C000001 /* little-endian Byte Swap Mode */
+#else
+#define MBX1_CMD_BSWAP  0x8C000000 /* big-endian Byte Swap Mode */
+#endif
+
+/* MAILBOX #2 - DRAM SIZE */
+#define MBX2_MEMSZ_MASK 0xFFFF0000 /* PUTS Memory Size Register mask */
+
+
+typedef struct {
+	struct net_device *dev;
+	struct card_t *card;
+	spinlock_t lock;	/* for wanxl_xmit */
+        int node;		/* physical port #0 - 3 */
+	unsigned int clock_type;
+	int tx_in, tx_out;
+	struct sk_buff *tx_skbs[TX_BUFFERS];
+}port_t;
+
+
+typedef struct {
+	desc_t rx_descs[RX_QUEUE_LENGTH];
+	port_status_t port_status[4];
+}card_status_t;
+
+
+typedef struct card_t {
+	int n_ports;		/* 1, 2 or 4 ports */
+	u8 irq;
+
+	u8 __iomem *plx;	/* PLX PCI9060 virtual base address */
+	struct pci_dev *pdev;	/* for pci_name(pdev) */
+	int rx_in;
+	struct sk_buff *rx_skbs[RX_QUEUE_LENGTH];
+	card_status_t *status;	/* shared between host and card */
+	dma_addr_t status_address;
+	port_t ports[0];	/* 1 - 4 port_t structures follow */
+}card_t;
+
+
+
+static inline port_t* dev_to_port(struct net_device *dev)
+{
+        return (port_t *)dev_to_hdlc(dev)->priv;
+}
+
+
+static inline port_status_t* get_status(port_t *port)
+{
+	return &port->card->status->port_status[port->node];
+}
+
+
+#ifdef DEBUG_PCI
+static inline dma_addr_t pci_map_single_debug(struct pci_dev *pdev, void *ptr,
+					      size_t size, int direction)
+{
+	dma_addr_t addr = pci_map_single(pdev, ptr, size, direction);
+	if (addr + size > 0x100000000LL)
+		printk(KERN_CRIT "wanXL %s: pci_map_single() returned memory"
+		       " at 0x%LX!\n", pci_name(pdev),
+		       (unsigned long long)addr);
+	return addr;
+}
+
+#undef pci_map_single
+#define pci_map_single pci_map_single_debug
+#endif
+
+
+/* Cable and/or personality module change interrupt service */
+static inline void wanxl_cable_intr(port_t *port)
+{
+	u32 value = get_status(port)->cable;
+	int valid = 1;
+	const char *cable, *pm, *dte = "", *dsr = "", *dcd = "";
+
+	switch(value & 0x7) {
+	case STATUS_CABLE_V35: cable = "V.35"; break;
+	case STATUS_CABLE_X21: cable = "X.21"; break;
+	case STATUS_CABLE_V24: cable = "V.24"; break;
+	case STATUS_CABLE_EIA530: cable = "EIA530"; break;
+	case STATUS_CABLE_NONE: cable = "no"; break;
+	default: cable = "invalid";
+	}
+
+	switch((value >> STATUS_CABLE_PM_SHIFT) & 0x7) {
+	case STATUS_CABLE_V35: pm = "V.35"; break;
+	case STATUS_CABLE_X21: pm = "X.21"; break;
+	case STATUS_CABLE_V24: pm = "V.24"; break;
+	case STATUS_CABLE_EIA530: pm = "EIA530"; break;
+	case STATUS_CABLE_NONE: pm = "no personality"; valid = 0; break;
+	default: pm = "invalid personality"; valid = 0;
+	}
+
+	if (valid) {
+		if ((value & 7) == ((value >> STATUS_CABLE_PM_SHIFT) & 7)) {
+			dsr = (value & STATUS_CABLE_DSR) ? ", DSR ON" :
+				", DSR off";
+			dcd = (value & STATUS_CABLE_DCD) ? ", carrier ON" :
+				", carrier off";
+		}
+		dte = (value & STATUS_CABLE_DCE) ? " DCE" : " DTE";
+	}
+	printk(KERN_INFO "%s: %s%s module, %s cable%s%s\n",
+	       port->dev->name, pm, dte, cable, dsr, dcd);
+
+	hdlc_set_carrier(value & STATUS_CABLE_DCD, port->dev);
+}
+
+
+
+/* Transmit complete interrupt service */
+static inline void wanxl_tx_intr(port_t *port)
+{
+	struct net_device *dev = port->dev;
+	struct net_device_stats *stats = hdlc_stats(dev);
+	while (1) {
+                desc_t *desc = &get_status(port)->tx_descs[port->tx_in];
+		struct sk_buff *skb = port->tx_skbs[port->tx_in];
+
+		switch (desc->stat) {
+		case PACKET_FULL:
+		case PACKET_EMPTY:
+			netif_wake_queue(dev);
+			return;
+
+		case PACKET_UNDERRUN:
+			stats->tx_errors++;
+			stats->tx_fifo_errors++;
+			break;
+
+		default:
+			stats->tx_packets++;
+			stats->tx_bytes += skb->len;
+		}
+                desc->stat = PACKET_EMPTY; /* Free descriptor */
+		pci_unmap_single(port->card->pdev, desc->address, skb->len,
+				 PCI_DMA_TODEVICE);
+		dev_kfree_skb_irq(skb);
+                port->tx_in = (port->tx_in + 1) % TX_BUFFERS;
+        }
+}
+
+
+
+/* Receive complete interrupt service */
+static inline void wanxl_rx_intr(card_t *card)
+{
+	desc_t *desc;
+	while (desc = &card->status->rx_descs[card->rx_in],
+	       desc->stat != PACKET_EMPTY) {
+		if ((desc->stat & PACKET_PORT_MASK) > card->n_ports)
+			printk(KERN_CRIT "wanXL %s: received packet for"
+			       " nonexistent port\n", pci_name(card->pdev));
+		else {
+			struct sk_buff *skb = card->rx_skbs[card->rx_in];
+			port_t *port = &card->ports[desc->stat &
+						    PACKET_PORT_MASK];
+			struct net_device *dev = port->dev;
+			struct net_device_stats *stats = hdlc_stats(dev);
+
+			if (!skb)
+				stats->rx_dropped++;
+			else {
+				pci_unmap_single(card->pdev, desc->address,
+						 BUFFER_LENGTH,
+						 PCI_DMA_FROMDEVICE);
+				skb_put(skb, desc->length);
+
+#ifdef DEBUG_PKT
+				printk(KERN_DEBUG "%s RX(%i):", dev->name,
+				       skb->len);
+				debug_frame(skb);
+#endif
+				stats->rx_packets++;
+				stats->rx_bytes += skb->len;
+				dev->last_rx = jiffies;
+				skb->protocol = hdlc_type_trans(skb, dev);
+				netif_rx(skb);
+				skb = NULL;
+			}
+
+			if (!skb) {
+				skb = dev_alloc_skb(BUFFER_LENGTH);
+				desc->address = skb ?
+					pci_map_single(card->pdev, skb->data,
+						       BUFFER_LENGTH,
+						       PCI_DMA_FROMDEVICE) : 0;
+				card->rx_skbs[card->rx_in] = skb;
+			}
+		}
+		desc->stat = PACKET_EMPTY; /* Free descriptor */
+		card->rx_in = (card->rx_in + 1) % RX_QUEUE_LENGTH;
+	}
+}
+
+
+
+static irqreturn_t wanxl_intr(int irq, void* dev_id, struct pt_regs *regs)
+{
+        card_t *card = dev_id;
+        int i;
+        u32 stat;
+        int handled = 0;
+
+
+        while((stat = readl(card->plx + PLX_DOORBELL_FROM_CARD)) != 0) {
+                handled = 1;
+		writel(stat, card->plx + PLX_DOORBELL_FROM_CARD);
+
+                for (i = 0; i < card->n_ports; i++) {
+			if (stat & (1 << (DOORBELL_FROM_CARD_TX_0 + i)))
+				wanxl_tx_intr(&card->ports[i]);
+			if (stat & (1 << (DOORBELL_FROM_CARD_CABLE_0 + i)))
+				wanxl_cable_intr(&card->ports[i]);
+		}
+		if (stat & (1 << DOORBELL_FROM_CARD_RX))
+			wanxl_rx_intr(card);
+        }
+
+        return IRQ_RETVAL(handled);
+}
+
+
+
+static int wanxl_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+        port_t *port = dev_to_port(dev);
+	desc_t *desc;
+
+        spin_lock(&port->lock);
+
+	desc = &get_status(port)->tx_descs[port->tx_out];
+        if (desc->stat != PACKET_EMPTY) {
+                /* should never happen - previous xmit should stop queue */
+#ifdef DEBUG_PKT
+                printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
+#endif
+		netif_stop_queue(dev);
+		spin_unlock_irq(&port->lock);
+		return 1;       /* request packet to be queued */
+	}
+
+#ifdef DEBUG_PKT
+	printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len);
+	debug_frame(skb);
+#endif
+
+	port->tx_skbs[port->tx_out] = skb;
+	desc->address = pci_map_single(port->card->pdev, skb->data, skb->len,
+				       PCI_DMA_TODEVICE);
+	desc->length = skb->len;
+	desc->stat = PACKET_FULL;
+	writel(1 << (DOORBELL_TO_CARD_TX_0 + port->node),
+	       port->card->plx + PLX_DOORBELL_TO_CARD);
+	dev->trans_start = jiffies;
+
+	port->tx_out = (port->tx_out + 1) % TX_BUFFERS;
+
+	if (get_status(port)->tx_descs[port->tx_out].stat != PACKET_EMPTY) {
+		netif_stop_queue(dev);
+#ifdef DEBUG_PKT
+		printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
+#endif
+	}
+
+	spin_unlock(&port->lock);
+	return 0;
+}
+
+
+
+static int wanxl_attach(struct net_device *dev, unsigned short encoding,
+			unsigned short parity)
+{
+	port_t *port = dev_to_port(dev);
+
+	if (encoding != ENCODING_NRZ &&
+	    encoding != ENCODING_NRZI)
+		return -EINVAL;
+
+	if (parity != PARITY_NONE &&
+	    parity != PARITY_CRC32_PR1_CCITT &&
+	    parity != PARITY_CRC16_PR1_CCITT &&
+	    parity != PARITY_CRC32_PR0_CCITT &&
+	    parity != PARITY_CRC16_PR0_CCITT)
+		return -EINVAL;
+
+	get_status(port)->encoding = encoding;
+	get_status(port)->parity = parity;
+	return 0;
+}
+
+
+
+static int wanxl_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	const size_t size = sizeof(sync_serial_settings);
+	sync_serial_settings line;
+	port_t *port = dev_to_port(dev);
+
+	if (cmd != SIOCWANDEV)
+		return hdlc_ioctl(dev, ifr, cmd);
+
+	switch (ifr->ifr_settings.type) {
+	case IF_GET_IFACE:
+		ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+		if (ifr->ifr_settings.size < size) {
+			ifr->ifr_settings.size = size; /* data size wanted */
+			return -ENOBUFS;
+		}
+		line.clock_type = get_status(port)->clocking;
+		line.clock_rate = 0;
+		line.loopback = 0;
+
+		if (copy_to_user(ifr->ifr_settings.ifs_ifsu.sync, &line, size))
+			return -EFAULT;
+		return 0;
+
+	case IF_IFACE_SYNC_SERIAL:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		if (dev->flags & IFF_UP)
+			return -EBUSY;
+
+		if (copy_from_user(&line, ifr->ifr_settings.ifs_ifsu.sync,
+				   size))
+			return -EFAULT;
+
+		if (line.clock_type != CLOCK_EXT &&
+		    line.clock_type != CLOCK_TXFROMRX)
+			return -EINVAL; /* No such clock setting */
+
+		if (line.loopback != 0)
+			return -EINVAL;
+
+		get_status(port)->clocking = line.clock_type;
+		return 0;
+
+	default:
+		return hdlc_ioctl(dev, ifr, cmd);
+        }
+}
+
+
+
+static int wanxl_open(struct net_device *dev)
+{
+	port_t *port = dev_to_port(dev);
+	u8 __iomem *dbr = port->card->plx + PLX_DOORBELL_TO_CARD;
+	unsigned long timeout;
+	int i;
+
+	if (get_status(port)->open) {
+		printk(KERN_ERR "%s: port already open\n", dev->name);
+		return -EIO;
+	}
+	if ((i = hdlc_open(dev)) != 0)
+		return i;
+
+	port->tx_in = port->tx_out = 0;
+	for (i = 0; i < TX_BUFFERS; i++)
+		get_status(port)->tx_descs[i].stat = PACKET_EMPTY;
+	/* signal the card */
+	writel(1 << (DOORBELL_TO_CARD_OPEN_0 + port->node), dbr);
+
+	timeout = jiffies + HZ;
+	do
+		if (get_status(port)->open) {
+			netif_start_queue(dev);
+			return 0;
+		}
+	while (time_after(timeout, jiffies));
+
+	printk(KERN_ERR "%s: unable to open port\n", dev->name);
+	/* ask the card to close the port, should it be still alive */
+	writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), dbr);
+	return -EFAULT;
+}
+
+
+
+static int wanxl_close(struct net_device *dev)
+{
+	port_t *port = dev_to_port(dev);
+	unsigned long timeout;
+	int i;
+
+	hdlc_close(dev);
+	/* signal the card */
+	writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node),
+	       port->card->plx + PLX_DOORBELL_TO_CARD);
+
+	timeout = jiffies + HZ;
+	do
+		if (!get_status(port)->open)
+			break;
+	while (time_after(timeout, jiffies));
+
+	if (get_status(port)->open)
+		printk(KERN_ERR "%s: unable to close port\n", dev->name);
+
+	netif_stop_queue(dev);
+
+	for (i = 0; i < TX_BUFFERS; i++) {
+		desc_t *desc = &get_status(port)->tx_descs[i];
+
+		if (desc->stat != PACKET_EMPTY) {
+			desc->stat = PACKET_EMPTY;
+			pci_unmap_single(port->card->pdev, desc->address,
+					 port->tx_skbs[i]->len,
+					 PCI_DMA_TODEVICE);
+			dev_kfree_skb(port->tx_skbs[i]);
+		}
+	}
+	return 0;
+}
+
+
+
+static struct net_device_stats *wanxl_get_stats(struct net_device *dev)
+{
+	struct net_device_stats *stats = hdlc_stats(dev);
+	port_t *port = dev_to_port(dev);
+
+	stats->rx_over_errors = get_status(port)->rx_overruns;
+	stats->rx_frame_errors = get_status(port)->rx_frame_errors;
+	stats->rx_errors = stats->rx_over_errors + stats->rx_frame_errors;
+        return stats;
+}
+
+
+
+static int wanxl_puts_command(card_t *card, u32 cmd)
+{
+	unsigned long timeout = jiffies + 5 * HZ;
+
+	writel(cmd, card->plx + PLX_MAILBOX_1);
+	do {
+		if (readl(card->plx + PLX_MAILBOX_1) == 0)
+			return 0;
+
+		schedule();
+	}while (time_after(timeout, jiffies));
+
+	return -1;
+}
+
+
+
+static void wanxl_reset(card_t *card)
+{
+	u32 old_value = readl(card->plx + PLX_CONTROL) & ~PLX_CTL_RESET;
+
+	writel(0x80, card->plx + PLX_MAILBOX_0);
+	writel(old_value | PLX_CTL_RESET, card->plx + PLX_CONTROL);
+	readl(card->plx + PLX_CONTROL); /* wait for posted write */
+	udelay(1);
+	writel(old_value, card->plx + PLX_CONTROL);
+	readl(card->plx + PLX_CONTROL); /* wait for posted write */
+}
+
+
+
+static void wanxl_pci_remove_one(struct pci_dev *pdev)
+{
+	card_t *card = pci_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < card->n_ports; i++) {
+		unregister_hdlc_device(card->ports[i].dev);
+		free_netdev(card->ports[i].dev);
+	}
+
+	/* unregister and free all host resources */
+	if (card->irq)
+		free_irq(card->irq, card);
+
+	wanxl_reset(card);
+
+	for (i = 0; i < RX_QUEUE_LENGTH; i++)
+		if (card->rx_skbs[i]) {
+			pci_unmap_single(card->pdev,
+					 card->status->rx_descs[i].address,
+					 BUFFER_LENGTH, PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(card->rx_skbs[i]);
+		}
+
+	if (card->plx)
+		iounmap(card->plx);
+
+	if (card->status)
+		pci_free_consistent(pdev, sizeof(card_status_t),
+				    card->status, card->status_address);
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+	kfree(card);
+}
+
+
+#include "wanxlfw.inc"
+
+static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
+					const struct pci_device_id *ent)
+{
+	card_t *card;
+	u32 ramsize, stat;
+	unsigned long timeout;
+	u32 plx_phy;		/* PLX PCI base address */
+	u32 mem_phy;		/* memory PCI base addr */
+	u8 __iomem *mem;	/* memory virtual base addr */
+	int i, ports, alloc_size;
+
+#ifndef MODULE
+	static int printed_version;
+	if (!printed_version) {
+		printed_version++;
+		printk(KERN_INFO "%s\n", version);
+	}
+#endif
+
+	i = pci_enable_device(pdev);
+	if (i)
+		return i;
+
+	/* QUICC can only access first 256 MB of host RAM directly,
+	   but PLX9060 DMA does 32-bits for actual packet data transfers */
+
+	/* FIXME when PCI/DMA subsystems are fixed.
+	   We set both dma_mask and consistent_dma_mask to 28 bits
+	   and pray pci_alloc_consistent() will use this info. It should
+	   work on most platforms */
+	if (pci_set_consistent_dma_mask(pdev, 0x0FFFFFFF) ||
+	    pci_set_dma_mask(pdev, 0x0FFFFFFF)) {
+		printk(KERN_ERR "wanXL: No usable DMA configuration\n");
+		return -EIO;
+	}
+
+	i = pci_request_regions(pdev, "wanXL");
+	if (i) {
+		pci_disable_device(pdev);
+		return i;
+	}
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_SBE_WANXL100: ports = 1; break;
+	case PCI_DEVICE_ID_SBE_WANXL200: ports = 2; break;
+	default: ports = 4;
+	}
+
+	alloc_size = sizeof(card_t) + ports * sizeof(port_t);
+	card = kmalloc(alloc_size, GFP_KERNEL);
+	if (card == NULL) {
+		printk(KERN_ERR "wanXL %s: unable to allocate memory\n",
+		       pci_name(pdev));
+		pci_release_regions(pdev);
+		pci_disable_device(pdev);
+		return -ENOBUFS;
+	}
+	memset(card, 0, alloc_size);
+
+	pci_set_drvdata(pdev, card);
+	card->pdev = pdev;
+
+	card->status = pci_alloc_consistent(pdev, sizeof(card_status_t),
+					    &card->status_address);
+	if (card->status == NULL) {
+		wanxl_pci_remove_one(pdev);
+		return -ENOBUFS;
+	}
+
+#ifdef DEBUG_PCI
+	printk(KERN_DEBUG "wanXL %s: pci_alloc_consistent() returned memory"
+	       " at 0x%LX\n", pci_name(pdev),
+	       (unsigned long long)card->status_address);
+#endif
+
+	/* FIXME when PCI/DMA subsystems are fixed.
+	   We set both dma_mask and consistent_dma_mask back to 32 bits
+	   to indicate the card can do 32-bit DMA addressing */
+	if (pci_set_consistent_dma_mask(pdev, 0xFFFFFFFF) ||
+	    pci_set_dma_mask(pdev, 0xFFFFFFFF)) {
+		printk(KERN_ERR "wanXL: No usable DMA configuration\n");
+		wanxl_pci_remove_one(pdev);
+		return -EIO;
+	}
+
+	/* set up PLX mapping */
+	plx_phy = pci_resource_start(pdev, 0);
+	card->plx = ioremap_nocache(plx_phy, 0x70);
+
+#if RESET_WHILE_LOADING
+	wanxl_reset(card);
+#endif
+
+	timeout = jiffies + 20 * HZ;
+	while ((stat = readl(card->plx + PLX_MAILBOX_0)) != 0) {
+		if (time_before(timeout, jiffies)) {
+			printk(KERN_WARNING "wanXL %s: timeout waiting for"
+			       " PUTS to complete\n", pci_name(pdev));
+			wanxl_pci_remove_one(pdev);
+			return -ENODEV;
+		}
+
+		switch(stat & 0xC0) {
+		case 0x00:	/* hmm - PUTS completed with non-zero code? */
+		case 0x80:	/* PUTS still testing the hardware */
+			break;
+
+		default:
+			printk(KERN_WARNING "wanXL %s: PUTS test 0x%X"
+			       " failed\n", pci_name(pdev), stat & 0x30);
+			wanxl_pci_remove_one(pdev);
+			return -ENODEV;
+		}
+
+		schedule();
+	}
+
+	/* get on-board memory size (PUTS detects no more than 4 MB) */
+	ramsize = readl(card->plx + PLX_MAILBOX_2) & MBX2_MEMSZ_MASK;
+
+	/* set up on-board RAM mapping */
+	mem_phy = pci_resource_start(pdev, 2);
+
+
+	/* sanity check the board's reported memory size */
+	if (ramsize < BUFFERS_ADDR +
+	    (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports) {
+		printk(KERN_WARNING "wanXL %s: no enough on-board RAM"
+		       " (%u bytes detected, %u bytes required)\n",
+		       pci_name(pdev), ramsize, BUFFERS_ADDR +
+		       (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports);
+		wanxl_pci_remove_one(pdev);
+		return -ENODEV;
+	}
+
+	if (wanxl_puts_command(card, MBX1_CMD_BSWAP)) {
+		printk(KERN_WARNING "wanXL %s: unable to Set Byte Swap"
+		       " Mode\n", pci_name(pdev));
+		wanxl_pci_remove_one(pdev);
+		return -ENODEV;
+	}
+
+	for (i = 0; i < RX_QUEUE_LENGTH; i++) {
+		struct sk_buff *skb = dev_alloc_skb(BUFFER_LENGTH);
+		card->rx_skbs[i] = skb;
+		if (skb)
+			card->status->rx_descs[i].address =
+				pci_map_single(card->pdev, skb->data,
+					       BUFFER_LENGTH,
+					       PCI_DMA_FROMDEVICE);
+	}
+
+	mem = ioremap_nocache(mem_phy, PDM_OFFSET + sizeof(firmware));
+	for (i = 0; i < sizeof(firmware); i += 4)
+		writel(htonl(*(u32*)(firmware + i)), mem + PDM_OFFSET + i);
+
+	for (i = 0; i < ports; i++)
+		writel(card->status_address +
+		       (void *)&card->status->port_status[i] -
+		       (void *)card->status, mem + PDM_OFFSET + 4 + i * 4);
+	writel(card->status_address, mem + PDM_OFFSET + 20);
+	writel(PDM_OFFSET, mem);
+	iounmap(mem);
+
+	writel(0, card->plx + PLX_MAILBOX_5);
+
+	if (wanxl_puts_command(card, MBX1_CMD_ABORTJ)) {
+		printk(KERN_WARNING "wanXL %s: unable to Abort and Jump\n",
+		       pci_name(pdev));
+		wanxl_pci_remove_one(pdev);
+		return -ENODEV;
+	}
+
+	stat = 0;
+	timeout = jiffies + 5 * HZ;
+	do {
+		if ((stat = readl(card->plx + PLX_MAILBOX_5)) != 0)
+			break;
+		schedule();
+	}while (time_after(timeout, jiffies));
+
+	if (!stat) {
+		printk(KERN_WARNING "wanXL %s: timeout while initializing card"
+		       "firmware\n", pci_name(pdev));
+		wanxl_pci_remove_one(pdev);
+		return -ENODEV;
+	}
+
+#if DETECT_RAM
+	ramsize = stat;
+#endif
+
+	printk(KERN_INFO "wanXL %s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n",
+	       pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
+
+	/* Allocate IRQ */
+	if (request_irq(pdev->irq, wanxl_intr, SA_SHIRQ, "wanXL", card)) {
+		printk(KERN_WARNING "wanXL %s: could not allocate IRQ%i.\n",
+		       pci_name(pdev), pdev->irq);
+		wanxl_pci_remove_one(pdev);
+		return -EBUSY;
+	}
+	card->irq = pdev->irq;
+
+	for (i = 0; i < ports; i++) {
+		hdlc_device *hdlc;
+		port_t *port = &card->ports[i];
+		struct net_device *dev = alloc_hdlcdev(port);
+		if (!dev) {
+			printk(KERN_ERR "wanXL %s: unable to allocate"
+			       " memory\n", pci_name(pdev));
+			wanxl_pci_remove_one(pdev);
+			return -ENOMEM;
+		}
+
+		port->dev = dev;
+		hdlc = dev_to_hdlc(dev);
+		spin_lock_init(&port->lock);
+		SET_MODULE_OWNER(dev);
+		dev->tx_queue_len = 50;
+		dev->do_ioctl = wanxl_ioctl;
+		dev->open = wanxl_open;
+		dev->stop = wanxl_close;
+		hdlc->attach = wanxl_attach;
+		hdlc->xmit = wanxl_xmit;
+		dev->get_stats = wanxl_get_stats;
+		port->card = card;
+		port->node = i;
+		get_status(port)->clocking = CLOCK_EXT;
+		if (register_hdlc_device(dev)) {
+			printk(KERN_ERR "wanXL %s: unable to register hdlc"
+			       " device\n", pci_name(pdev));
+			free_netdev(dev);
+			wanxl_pci_remove_one(pdev);
+			return -ENOBUFS;
+		}
+		card->n_ports++;
+	}
+
+	printk(KERN_INFO "wanXL %s: port", pci_name(pdev));
+	for (i = 0; i < ports; i++)
+		printk("%s #%i: %s", i ? "," : "", i,
+		       card->ports[i].dev->name);
+	printk("\n");
+
+	for (i = 0; i < ports; i++)
+		wanxl_cable_intr(&card->ports[i]); /* get carrier status etc.*/
+
+	return 0;
+}
+
+static struct pci_device_id wanxl_pci_tbl[] __devinitdata = {
+	{ PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL100, PCI_ANY_ID,
+	  PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL200, PCI_ANY_ID,
+	  PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL400, PCI_ANY_ID,
+	  PCI_ANY_ID, 0, 0, 0 },
+	{ 0, }
+};
+
+
+static struct pci_driver wanxl_pci_driver = {
+	.name		= "wanXL",
+	.id_table	= wanxl_pci_tbl,
+	.probe		= wanxl_pci_init_one,
+	.remove		= wanxl_pci_remove_one,
+};
+
+
+static int __init wanxl_init_module(void)
+{
+#ifdef MODULE
+	printk(KERN_INFO "%s\n", version);
+#endif
+	return pci_module_init(&wanxl_pci_driver);
+}
+
+static void __exit wanxl_cleanup_module(void)
+{
+	pci_unregister_driver(&wanxl_pci_driver);
+}
+
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
+MODULE_DESCRIPTION("SBE Inc. wanXL serial port driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(pci, wanxl_pci_tbl);
+
+module_init(wanxl_init_module);
+module_exit(wanxl_cleanup_module);