pcmcia: pcmcia_config_loop() improvement by passing vcc

By passing the current Vcc setting to the pcmcia_config_loop callback
function, we can remove pcmcia_get_configuration_info() calls from many
drivers.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 6 insertions, 22 deletions

diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index e28878dfaba3..d7e9d9c3042c 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -633,31 +633,26 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
  * device available to the system.
  */
 
-struct spectrum_cs_config_data {
-	config_info_t conf;
-};
-
 static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 				    cistpl_cftable_entry_t *cfg,
 				    cistpl_cftable_entry_t *dflt,
+				    unsigned int vcc,
 				    void *priv_data)
 {
-	struct spectrum_cs_config_data *cfg_mem = priv_data;
-
 	if (cfg->index == 0)
 		goto next_entry;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/* Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
 	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
@@ -705,7 +700,6 @@ next_entry:
 static int
 spectrum_cs_config(struct pcmcia_device *link)
 {
-	struct spectrum_cs_config_data *cfg_mem;
 	struct net_device *dev = link->priv;
 	struct orinoco_private *priv = netdev_priv(dev);
 	struct orinoco_pccard *card = priv->card;
@@ -713,14 +707,6 @@ spectrum_cs_config(struct pcmcia_device *link)
 	int last_fn, last_ret;
 	void __iomem *mem;
 
-	cfg_mem = kzalloc(sizeof(struct spectrum_cs_config_data), GFP_KERNEL);
-	if (!cfg_mem)
-		return -ENOMEM;
-
-	/* Look up the current Vcc */
-	CS_CHECK(GetConfigurationInfo,
-		 pcmcia_get_configuration_info(link, &cfg_mem->conf));
-
 	/*
 	 * In this loop, we scan the CIS for configuration table
 	 * entries, each of which describes a valid card
@@ -735,7 +721,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, cfg_mem);
+	last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
 	if (last_ret) {
 		if (!ignore_cis_vcc)
 			printk(KERN_ERR PFX "GetNextTuple(): No matching "
@@ -799,7 +785,6 @@ spectrum_cs_config(struct pcmcia_device *link)
 	       link->irq.AssignedIRQ, link->io.BasePort1,
 	       link->io.BasePort1 + link->io.NumPorts1 - 1);
 
-	kfree(cfg_mem);
 	return 0;
 
  cs_failed:
@@ -807,7 +792,6 @@ spectrum_cs_config(struct pcmcia_device *link)
 
  failed:
 	spectrum_cs_release(link);
-	kfree(cfg_mem);
 	return -ENODEV;
 }				/* spectrum_cs_config */