Merge branch 'remotes/lorenzo/pci/misc'

- Add macros for PCI Configuration Mechanism #1 and use them in the
  ftpci100, mt7621, and tegra drivers (Pali Rohár)

* remotes/lorenzo/pci/misc:
  PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro
  PCI: mt7621: Use PCI_CONF1_EXT_ADDRESS() macro
  PCI: ftpci100: Use PCI_CONF1_ADDRESS() macro
  PCI: Add standard PCI Config Address macros

4 files changed, 58 insertions, 36 deletions

diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c
index 88980a44461d..0cfd9d5a497c 100644
--- a/drivers/pci/controller/pci-ftpci100.c
+++ b/drivers/pci/controller/pci-ftpci100.c
@@ -103,13 +103,6 @@
 #define FARADAY_PCI_DMA_MEM2_BASE	0x00000000
 #define FARADAY_PCI_DMA_MEM3_BASE	0x00000000
 
-/* Defines for PCI configuration command register */
-#define PCI_CONF_ENABLE		BIT(31)
-#define PCI_CONF_WHERE(r)	((r) & 0xFC)
-#define PCI_CONF_BUS(b)		(((b) & 0xFF) << 16)
-#define PCI_CONF_DEVICE(d)	(((d) & 0x1F) << 11)
-#define PCI_CONF_FUNCTION(f)	(((f) & 0x07) << 8)
-
 /**
  * struct faraday_pci_variant - encodes IP block differences
  * @cascaded_irq: this host has cascaded IRQs from an interrupt controller
@@ -190,11 +183,8 @@ static int faraday_raw_pci_read_config(struct faraday_pci *p, int bus_number,
 				       unsigned int fn, int config, int size,
 				       u32 *value)
 {
-	writel(PCI_CONF_BUS(bus_number) |
-			PCI_CONF_DEVICE(PCI_SLOT(fn)) |
-			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
-			PCI_CONF_WHERE(config) |
-			PCI_CONF_ENABLE,
+	writel(PCI_CONF1_ADDRESS(bus_number, PCI_SLOT(fn),
+				 PCI_FUNC(fn), config),
 			p->base + FTPCI_CONFIG);
 
 	*value = readl(p->base + FTPCI_DATA);
@@ -225,11 +215,8 @@ static int faraday_raw_pci_write_config(struct faraday_pci *p, int bus_number,
 {
 	int ret = PCIBIOS_SUCCESSFUL;
 
-	writel(PCI_CONF_BUS(bus_number) |
-			PCI_CONF_DEVICE(PCI_SLOT(fn)) |
-			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
-			PCI_CONF_WHERE(config) |
-			PCI_CONF_ENABLE,
+	writel(PCI_CONF1_ADDRESS(bus_number, PCI_SLOT(fn),
+				 PCI_FUNC(fn), config),
 			p->base + FTPCI_CONFIG);
 
 	switch (size) {
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 8e323e93be91..24478ae5a345 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -415,13 +415,6 @@ static inline u32 pads_readl(struct tegra_pcie *pcie, unsigned long offset)
  * address (access to which generates correct config transaction) falls in
  * this 4 KiB region.
  */
-static unsigned int tegra_pcie_conf_offset(u8 bus, unsigned int devfn,
-					   unsigned int where)
-{
-	return ((where & 0xf00) << 16) | (bus << 16) | (PCI_SLOT(devfn) << 11) |
-	       (PCI_FUNC(devfn) << 8) | (where & 0xff);
-}
-
 static void __iomem *tegra_pcie_map_bus(struct pci_bus *bus,
 					unsigned int devfn,
 					int where)
@@ -443,7 +436,9 @@ static void __iomem *tegra_pcie_map_bus(struct pci_bus *bus,
 		unsigned int offset;
 		u32 base;
 
-		offset = tegra_pcie_conf_offset(bus->number, devfn, where);
+		offset = PCI_CONF1_EXT_ADDRESS(bus->number, PCI_SLOT(devfn),
+					       PCI_FUNC(devfn), where) &
+			 ~PCI_CONF1_ENABLE;
 
 		/* move 4 KiB window to offset within the FPCI region */
 		base = 0xfe100000 + ((offset & ~(SZ_4K - 1)) >> 8);
diff --git a/drivers/pci/controller/pcie-mt7621.c b/drivers/pci/controller/pcie-mt7621.c
index 33eb37a2225c..4bd1abf26008 100644
--- a/drivers/pci/controller/pcie-mt7621.c
+++ b/drivers/pci/controller/pcie-mt7621.c
@@ -30,6 +30,8 @@
 #include <linux/reset.h>
 #include <linux/sys_soc.h>
 
+#include "../pci.h"
+
 /* MediaTek-specific configuration registers */
 #define PCIE_FTS_NUM			0x70c
 #define PCIE_FTS_NUM_MASK		GENMASK(15, 8)
@@ -120,19 +122,12 @@ static inline void pcie_port_write(struct mt7621_pcie_port *port,
 	writel_relaxed(val, port->base + reg);
 }
 
-static inline u32 mt7621_pcie_get_cfgaddr(unsigned int bus, unsigned int slot,
-					 unsigned int func, unsigned int where)
-{
-	return (((where & 0xf00) >> 8) << 24) | (bus << 16) | (slot << 11) |
-		(func << 8) | (where & 0xfc) | 0x80000000;
-}
-
 static void __iomem *mt7621_pcie_map_bus(struct pci_bus *bus,
 					 unsigned int devfn, int where)
 {
 	struct mt7621_pcie *pcie = bus->sysdata;
-	u32 address = mt7621_pcie_get_cfgaddr(bus->number, PCI_SLOT(devfn),
-					     PCI_FUNC(devfn), where);
+	u32 address = PCI_CONF1_EXT_ADDRESS(bus->number, PCI_SLOT(devfn),
+					    PCI_FUNC(devfn), where);
 
 	writel_relaxed(address, pcie->base + RALINK_PCI_CONFIG_ADDR);
 
@@ -147,7 +142,7 @@ static struct pci_ops mt7621_pcie_ops = {
 
 static u32 read_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg)
 {
-	u32 address = mt7621_pcie_get_cfgaddr(0, dev, 0, reg);
+	u32 address = PCI_CONF1_EXT_ADDRESS(0, dev, 0, reg);
 
 	pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
 	return pcie_read(pcie, RALINK_PCI_CONFIG_DATA);
@@ -156,7 +151,7 @@ static u32 read_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg)
 static void write_config(struct mt7621_pcie *pcie, unsigned int dev,
 			 u32 reg, u32 val)
 {
-	u32 address = mt7621_pcie_get_cfgaddr(0, dev, 0, reg);
+	u32 address = PCI_CONF1_EXT_ADDRESS(0, dev, 0, reg);
 
 	pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
 	pcie_write(pcie, val, RALINK_PCI_CONFIG_DATA);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 46af1195c047..b1ebb7ab8805 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -776,4 +776,49 @@ static inline pci_power_t mid_pci_get_power_state(struct pci_dev *pdev)
 }
 #endif
 
+/*
+ * Config Address for PCI Configuration Mechanism #1
+ *
+ * See PCI Local Bus Specification, Revision 3.0,
+ * Section 3.2.2.3.2, Figure 3-2, p. 50.
+ */
+
+#define PCI_CONF1_BUS_SHIFT	16 /* Bus number */
+#define PCI_CONF1_DEV_SHIFT	11 /* Device number */
+#define PCI_CONF1_FUNC_SHIFT	8  /* Function number */
+
+#define PCI_CONF1_BUS_MASK	0xff
+#define PCI_CONF1_DEV_MASK	0x1f
+#define PCI_CONF1_FUNC_MASK	0x7
+#define PCI_CONF1_REG_MASK	0xfc /* Limit aligned offset to a maximum of 256B */
+
+#define PCI_CONF1_ENABLE	BIT(31)
+#define PCI_CONF1_BUS(x)	(((x) & PCI_CONF1_BUS_MASK) << PCI_CONF1_BUS_SHIFT)
+#define PCI_CONF1_DEV(x)	(((x) & PCI_CONF1_DEV_MASK) << PCI_CONF1_DEV_SHIFT)
+#define PCI_CONF1_FUNC(x)	(((x) & PCI_CONF1_FUNC_MASK) << PCI_CONF1_FUNC_SHIFT)
+#define PCI_CONF1_REG(x)	((x) & PCI_CONF1_REG_MASK)
+
+#define PCI_CONF1_ADDRESS(bus, dev, func, reg) \
+	(PCI_CONF1_ENABLE | \
+	 PCI_CONF1_BUS(bus) | \
+	 PCI_CONF1_DEV(dev) | \
+	 PCI_CONF1_FUNC(func) | \
+	 PCI_CONF1_REG(reg))
+
+/*
+ * Extension of PCI Config Address for accessing extended PCIe registers
+ *
+ * No standardized specification, but used on lot of non-ECAM-compliant ARM SoCs
+ * or on AMD Barcelona and new CPUs. Reserved bits [27:24] of PCI Config Address
+ * are used for specifying additional 4 high bits of PCI Express register.
+ */
+
+#define PCI_CONF1_EXT_REG_SHIFT	16
+#define PCI_CONF1_EXT_REG_MASK	0xf00
+#define PCI_CONF1_EXT_REG(x)	(((x) & PCI_CONF1_EXT_REG_MASK) << PCI_CONF1_EXT_REG_SHIFT)
+
+#define PCI_CONF1_EXT_ADDRESS(bus, dev, func, reg) \
+	(PCI_CONF1_ADDRESS(bus, dev, func, reg) | \
+	 PCI_CONF1_EXT_REG(reg))
+
 #endif /* DRIVERS_PCI_H */