Merge branch 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

* 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (24 commits)
  usb: dwc3: gadget: add support for SG lists
  usb: dwc3: gadget: don't force 'LST' always
  usb: dwc3: gadget: don't return anything on prepare trbs
  usb: dwc3: gadget: re-factor dwc3_prepare_trbs()
  usb: gadget: introduce support for sg lists
  usb: renesas: pipe: convert a long if into a XOR operation
  usb: gadget: remove useless depends on Kconfig
  usb: gadget: s3c-hsudc: remove the_controller global
  usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource
  usb: gadget: s3c-hsudc: Add regulator handling
  usb: gadget: s3c-hsudc: use udc_start and udc_stop functions
  usb: gadget: s3c-hsudc: move device registration to probe
  usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe
  usb: gadget: s3c-hsudc: add __devinit to probe function
  usb: gadget: s3c-hsudc: move platform_data struct to global header
  USB: EHCI: Add Marvell Host Controller driver
  USB: OTG: add Marvell usb OTG driver support
  usb: gadget: mv_udc: drop ARCH dependency
  usb: gadget: mv_udc: fix bug in ep_dequeue
  usb: gadget: enlarge maxburst bit width.
  ...

3 files changed, 61 insertions, 3 deletions

diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
index e9d9149ddf38..d94804aca764 100644
--- a/include/linux/platform_data/mv_usb.h
+++ b/include/linux/platform_data/mv_usb.h
@@ -42,9 +42,23 @@ struct mv_usb_platform_data {
 	/* only valid for HCD. OTG or Host only*/
 	unsigned int		mode;
 
-	int     (*phy_init)(unsigned int regbase);
-	void    (*phy_deinit)(unsigned int regbase);
+	/* This flag is used for that needs id pin checked by otg */
+	unsigned int    disable_otg_clock_gating:1;
+	/* Force a_bus_req to be asserted */
+	 unsigned int    otg_force_a_bus_req:1;
+
+	int	(*phy_init)(void __iomem *regbase);
+	void	(*phy_deinit)(void __iomem *regbase);
 	int	(*set_vbus)(unsigned int vbus);
+	int     (*private_init)(void __iomem *opregs, void __iomem *phyregs);
 };
 
+#ifndef CONFIG_HAVE_CLK
+/* Dummy stub for clk framework */
+#define clk_get(dev, id)       NULL
+#define clk_put(clock)         do {} while (0)
+#define clk_enable(clock)      do {} while (0)
+#define clk_disable(clock)     do {} while (0)
+#endif
+
 #endif
diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h
new file mode 100644
index 000000000000..6fa109339bf9
--- /dev/null
+++ b/include/linux/platform_data/s3c-hsudc.h
@@ -0,0 +1,34 @@
+/*
+ * S3C24XX USB 2.0 High-speed USB controller gadget driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints.
+ * Each endpoint can be configured as either in or out endpoint. Endpoints
+ * can be configured for Bulk or Interrupt transfer mode.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __LINUX_USB_S3C_HSUDC_H
+#define __LINUX_USB_S3C_HSUDC_H
+
+/**
+ * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
+ * @epnum: Number of endpoints to be instantiated by the controller driver.
+ * @gpio_init: Platform specific USB related GPIO initialization.
+ * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
+ *
+ * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
+ * controllers.
+ */
+struct s3c24xx_hsudc_platdata {
+	unsigned int	epnum;
+	void		(*gpio_init)(void);
+	void		(*gpio_uninit)(void);
+};
+
+#endif	/* __LINUX_USB_S3C_HSUDC_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 317d8925387c..da653b5c7134 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/scatterlist.h>
 #include <linux/types.h>
 #include <linux/usb/ch9.h>
 
@@ -32,6 +33,9 @@ struct usb_ep;
  * @dma: DMA address corresponding to 'buf'.  If you don't set this
  *	field, and the usb controller needs one, it is responsible
  *	for mapping and unmapping the buffer.
+ * @sg: a scatterlist for SG-capable controllers.
+ * @num_sgs: number of SG entries
+ * @num_mapped_sgs: number of SG entries mapped to DMA (internal)
  * @length: Length of that data
  * @stream_id: The stream id, when USB3.0 bulk streams are being used
  * @no_interrupt: If true, hints that no completion irq is needed.
@@ -88,6 +92,10 @@ struct usb_request {
 	unsigned		length;
 	dma_addr_t		dma;
 
+	struct scatterlist	*sg;
+	unsigned		num_sgs;
+	unsigned		num_mapped_sgs;
+
 	unsigned		stream_id:16;
 	unsigned		no_interrupt:1;
 	unsigned		zero:1;
@@ -164,7 +172,7 @@ struct usb_ep {
 	unsigned		maxpacket:16;
 	unsigned		max_streams:16;
 	unsigned		mult:2;
-	unsigned		maxburst:4;
+	unsigned		maxburst:5;
 	u8			address;
 	const struct usb_endpoint_descriptor	*desc;
 	const struct usb_ss_ep_comp_descriptor	*comp_desc;
@@ -479,6 +487,7 @@ struct usb_gadget_ops {
  * @speed: Speed of current connection to USB host.
  * @max_speed: Maximal speed the UDC can handle.  UDC must support this
  *      and all slower speeds.
+ * @sg_supported: true if we can handle scatter-gather
  * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
  *	gadget driver must provide a USB OTG descriptor.
  * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable
@@ -519,6 +528,7 @@ struct usb_gadget {
 	struct list_head		ep_list;	/* of usb_ep */
 	enum usb_device_speed		speed;
 	enum usb_device_speed		max_speed;
+	unsigned			sg_supported:1;
 	unsigned			is_otg:1;
 	unsigned			is_a_peripheral:1;
 	unsigned			b_hnp_enable:1;