summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/board/fsl-board.txt30
-rw-r--r--arch/powerpc/configs/mpc5200_defconfig1
-rw-r--r--arch/powerpc/platforms/83xx/mpc836x_mds.c7
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c6
-rw-r--r--arch/powerpc/platforms/86xx/mpc8610_hpcd.c4
-rw-r--r--arch/powerpc/platforms/Kconfig10
-rw-r--r--arch/powerpc/sysdev/Makefile1
-rw-r--r--arch/powerpc/sysdev/simple_gpio.c143
-rw-r--r--arch/powerpc/sysdev/simple_gpio.h13
9 files changed, 0 insertions, 215 deletions
diff --git a/Documentation/devicetree/bindings/board/fsl-board.txt b/Documentation/devicetree/bindings/board/fsl-board.txt
index eb52f6b35159..9cde57015921 100644
--- a/Documentation/devicetree/bindings/board/fsl-board.txt
+++ b/Documentation/devicetree/bindings/board/fsl-board.txt
@@ -47,36 +47,6 @@ Example (LS2080A-RDB):
reg = <0x3 0 0x10000>;
};
-* Freescale BCSR GPIO banks
-
-Some BCSR registers act as simple GPIO controllers, each such
-register can be represented by the gpio-controller node.
-
-Required properities:
-- compatible : Should be "fsl,<board>-bcsr-gpio".
-- reg : Should contain the address and the length of the GPIO bank
- register.
-- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional parameters (currently unused).
-- gpio-controller : Marks the port as GPIO controller.
-
-Example:
-
- bcsr@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8360mds-bcsr";
- reg = <1 0 0x8000>;
- ranges = <0 1 0 0x8000>;
-
- bcsr13: gpio-controller@d {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8360mds-bcsr-gpio";
- reg = <0xd 1>;
- gpio-controller;
- };
- };
-
* Freescale on-board FPGA connected on I2C bus
Some Freescale boards like BSC9132QDS have on board FPGA connected on
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 6f87a5c74960..83d801307178 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -15,7 +15,6 @@ CONFIG_PPC_MEDIA5200=y
CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_LPBFIFO=m
# CONFIG_PPC_PMAC is not set
-CONFIG_SIMPLE_GPIO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 4a4efa906d35..240a26d88b07 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -39,7 +39,6 @@
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
-#include <sysdev/simple_gpio.h>
#include <soc/fsl/qe/qe.h>
#include <soc/fsl/qe/qe_ic.h>
@@ -181,12 +180,6 @@ static int __init mpc836x_usb_cfg(void)
qe_usb_clock_set(QE_CLK21, 48000000);
} else {
setbits8(&bcsr[13], BCSR13_USBMODE);
- /*
- * The BCSR GPIOs are used to control power and
- * speed of the USB transceiver. This is needed for
- * the USB Host only.
- */
- simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio");
}
of_node_put(np);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 120633f99ea6..381a6ac8cb4b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -43,7 +43,6 @@
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
-#include <sysdev/simple_gpio.h>
#include <soc/fsl/qe/qe.h>
#include <soc/fsl/qe/qe_ic.h>
#include <asm/mpic.h>
@@ -350,11 +349,6 @@ machine_arch_initcall(mpc8569_mds, board_fixups);
static int __init mpc85xx_publish_devices(void)
{
- if (machine_is(mpc8568_mds))
- simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
- if (machine_is(mpc8569_mds))
- simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
-
return mpc85xx_common_publish_devices();
}
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 96b27f6fdd0f..7733d0607da2 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -34,7 +34,6 @@
#include <linux/of_platform.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
-#include <sysdev/simple_gpio.h>
#include "mpc86xx.h"
@@ -93,9 +92,6 @@ static const struct of_device_id mpc8610_ids[] __initconst = {
static int __init mpc8610_declare_of_platform_devices(void)
{
- /* Firstly, register PIXIS GPIOs. */
- simple_gpiochip_init("fsl,fpga-pixis-gpio-bank");
-
/* Enable wakeup on PIXIS' event IRQ. */
mpc8610_suspend_init();
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index d82e3664ffdf..e28df298df56 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -303,16 +303,6 @@ config GEN_RTC
replacing their get_rtc_time/set_rtc_time callbacks with
a proper RTC device driver.
-config SIMPLE_GPIO
- bool "Support for simple, memory-mapped GPIO controllers"
- depends on PPC
- select GPIOLIB
- help
- Say Y here to support simple, memory-mapped GPIO controllers.
- These are usually BCSRs used to control board's switches, LEDs,
- chip-selects, Ethernet/USB PHY's power and various other small
- on-board peripherals.
-
config MCU_MPC8349EMITX
bool "MPC8349E-mITX MCU driver"
depends on I2C=y && PPC_83xx
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 603b3c656d19..cb5a5bd2cef5 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_FSL_CORENET_RCPM) += fsl_rcpm.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
-obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o
diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c
deleted file mode 100644
index dc1740cd9e42..000000000000
--- a/arch/powerpc/sysdev/simple_gpio.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Simple Memory-Mapped GPIOs
- *
- * Copyright (c) MontaVista Software, Inc. 2008.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio/driver.h>
-#include <linux/slab.h>
-#include <asm/prom.h>
-#include "simple_gpio.h"
-
-struct u8_gpio_chip {
- struct of_mm_gpio_chip mm_gc;
- spinlock_t lock;
-
- /* shadowed data register to clear/set bits safely */
- u8 data;
-};
-
-static u8 u8_pin2mask(unsigned int pin)
-{
- return 1 << (8 - 1 - pin);
-}
-
-static int u8_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-
- return !!(in_8(mm_gc->regs) & u8_pin2mask(gpio));
-}
-
-static void u8_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct u8_gpio_chip *u8_gc = gpiochip_get_data(gc);
- unsigned long flags;
-
- spin_lock_irqsave(&u8_gc->lock, flags);
-
- if (val)
- u8_gc->data |= u8_pin2mask(gpio);
- else
- u8_gc->data &= ~u8_pin2mask(gpio);
-
- out_8(mm_gc->regs, u8_gc->data);
-
- spin_unlock_irqrestore(&u8_gc->lock, flags);
-}
-
-static int u8_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
-{
- return 0;
-}
-
-static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- u8_gpio_set(gc, gpio, val);
- return 0;
-}
-
-static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
-{
- struct u8_gpio_chip *u8_gc =
- container_of(mm_gc, struct u8_gpio_chip, mm_gc);
-
- u8_gc->data = in_8(mm_gc->regs);
-}
-
-static int __init u8_simple_gpiochip_add(struct device_node *np)
-{
- int ret;
- struct u8_gpio_chip *u8_gc;
- struct of_mm_gpio_chip *mm_gc;
- struct gpio_chip *gc;
-
- u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL);
- if (!u8_gc)
- return -ENOMEM;
-
- spin_lock_init(&u8_gc->lock);
-
- mm_gc = &u8_gc->mm_gc;
- gc = &mm_gc->gc;
-
- mm_gc->save_regs = u8_gpio_save_regs;
- gc->ngpio = 8;
- gc->direction_input = u8_gpio_dir_in;
- gc->direction_output = u8_gpio_dir_out;
- gc->get = u8_gpio_get;
- gc->set = u8_gpio_set;
-
- ret = of_mm_gpiochip_add_data(np, mm_gc, u8_gc);
- if (ret)
- goto err;
- return 0;
-err:
- kfree(u8_gc);
- return ret;
-}
-
-void __init simple_gpiochip_init(const char *compatible)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, NULL, compatible) {
- int ret;
- struct resource r;
-
- ret = of_address_to_resource(np, 0, &r);
- if (ret)
- goto err;
-
- switch (resource_size(&r)) {
- case 1:
- ret = u8_simple_gpiochip_add(np);
- if (ret)
- goto err;
- break;
- default:
- /*
- * Whenever you need support for GPIO bank width > 1,
- * please just turn u8_ code into huge macros, and
- * construct needed uX_ code with it.
- */
- ret = -ENOSYS;
- goto err;
- }
- continue;
-err:
- pr_err("%pOF: registration failed, status %d\n", np, ret);
- }
-}
diff --git a/arch/powerpc/sysdev/simple_gpio.h b/arch/powerpc/sysdev/simple_gpio.h
deleted file mode 100644
index f3f3a20d39e2..000000000000
--- a/arch/powerpc/sysdev/simple_gpio.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SYSDEV_SIMPLE_GPIO_H
-#define __SYSDEV_SIMPLE_GPIO_H
-
-#include <linux/errno.h>
-
-#ifdef CONFIG_SIMPLE_GPIO
-extern void simple_gpiochip_init(const char *compatible);
-#else
-static inline void simple_gpiochip_init(const char *compatible) {}
-#endif /* CONFIG_SIMPLE_GPIO */
-
-#endif /* __SYSDEV_SIMPLE_GPIO_H */