diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml new file mode 100644 index 000000000000..e841659e20cd --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml @@ -0,0 +1,255 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/samsung,mipi-dsim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung MIPI DSIM bridge controller + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Jagan Teki <jagan@amarulasolutions.com> + - Marek Szyprowski <m.szyprowski@samsung.com> + +description: | + Samsung MIPI DSIM bridge controller can be found it on Exynos + and i.MX8M Mini/Nano/Plus SoC's. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos3250-mipi-dsi + - samsung,exynos4210-mipi-dsi + - samsung,exynos5410-mipi-dsi + - samsung,exynos5422-mipi-dsi + - samsung,exynos5433-mipi-dsi + - fsl,imx8mm-mipi-dsim + - fsl,imx8mp-mipi-dsim + - items: + - const: fsl,imx8mn-mipi-dsim + - const: fsl,imx8mm-mipi-dsim + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + minItems: 2 + maxItems: 5 + + clock-names: + minItems: 2 + maxItems: 5 + + samsung,phy-type: + $ref: /schemas/types.yaml#/definitions/uint32 + description: phandle to the samsung phy-type + + power-domains: + maxItems: 1 + + samsung,power-domain: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the associated samsung power domain + + vddcore-supply: + description: MIPI DSIM Core voltage supply (e.g. 1.1V) + + vddio-supply: + description: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V) + + samsung,burst-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM high speed burst mode frequency. + + samsung,esc-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM escape mode frequency. + + samsung,pll-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + DSIM oscillator clock frequency. + + phys: + maxItems: 1 + + phy-names: + const: dsim + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node to receive pixel data from the + display controller. Exactly one endpoint must be + specified. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + DSI output port node to the panel or the next bridge + in the chain. + +required: + - clock-names + - clocks + - compatible + - interrupts + - reg + - samsung,burst-clock-frequency + - samsung,esc-clock-frequency + - samsung,pll-clock-frequency + +allOf: + - $ref: ../dsi-controller.yaml# + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-mipi-dsi + + then: + properties: + clocks: + minItems: 5 + + clock-names: + items: + - const: bus_clk + - const: phyclk_mipidphy0_bitclkdiv8 + - const: phyclk_mipidphy0_rxclkesc0 + - const: sclk_rgb_vclk_to_dsim0 + - const: sclk_mipi + + ports: + required: + - port@0 + + required: + - ports + - vddcore-supply + - vddio-supply + + - if: + properties: + compatible: + contains: + const: samsung,exynos5410-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: bus_clk + - const: pll_clk + + required: + - vddcore-supply + - vddio-supply + + - if: + properties: + compatible: + contains: + const: samsung,exynos4210-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: bus_clk + - const: sclk_mipi + + required: + - vddcore-supply + - vddio-supply + + - if: + properties: + compatible: + contains: + const: samsung,exynos3250-mipi-dsi + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: bus_clk + - const: pll_clk + + required: + - vddcore-supply + - vddio-supply + - samsung,phy-type + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dsi@13900000 { + compatible = "samsung,exynos5433-mipi-dsi"; + reg = <0x13900000 0xC0>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&cmu_disp CLK_PCLK_DSIM0>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, + <&cmu_disp CLK_SCLK_DSIM0>; + clock-names = "bus_clk", + "phyclk_mipidphy0_bitclkdiv8", + "phyclk_mipidphy0_rxclkesc0", + "sclk_rgb_vclk_to_dsim0", + "sclk_mipi"; + power-domains = <&pd_disp>; + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo7_reg>; + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; + samsung,pll-clock-frequency = <24000000>; + pinctrl-names = "default"; + pinctrl-0 = <&te_irq>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_to_mic: endpoint { + remote-endpoint = <&mic_to_dsi>; + }; + }; + }; + }; |