1 files changed, 0 insertions, 81 deletions
diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
deleted file mode 100644
index a4149c9434ea..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS)
--------------------------------------------------------------
-
-Required properties:
-
-- compatible	  : "samsung,s5pv210-csis" for S5PV210 (S5PC110),
-		    "samsung,exynos4210-csis" for Exynos4210 (S5PC210),
-		    "samsung,exynos4212-csis" for Exynos4212/Exynos4412,
-		    "samsung,exynos5250-csis" for Exynos5250;
-- reg		  : offset and length of the register set for the device;
-- interrupts      : should contain MIPI CSIS interrupt; the format of the
-		    interrupt specifier depends on the interrupt controller;
-- bus-width	  : maximum number of data lanes supported (SoC specific);
-- vddio-supply    : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V);
-- vddcore-supply  : MIPI CSIS Core voltage supply (e.g. 1.1V);
-- clocks	  : list of clock specifiers, corresponding to entries in
-		    clock-names property;
-- clock-names	  : must contain "csis", "sclk_csis" entries, matching entries
-		    in the clocks property.
-
-Optional properties:
-
-- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
-		    value when this property is not specified is 166 MHz;
-- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present
-		    external clock from CMU will be used, or the bus clock if
-		    if it's not specified.
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-media/video-interfaces.txt. The following are properties specific to those nodes.
-
-port node
----------
-
-- reg		  : (required) must be 3 for camera C input (CSIS0) or 4 for
-		    camera D input (CSIS1);
-
-endpoint node
--------------
-
-- data-lanes	  : (required) an array specifying active physical MIPI-CSI2
-		    data input lanes and their mapping to logical lanes; the
-		    array's content is unused, only its length is meaningful;
-
-- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time;
-
-
-Example:
-
-	reg0: regulator@0 {
-	};
-
-	reg1: regulator@1 {
-	};
-
-/* SoC properties */
-
-	csis_0: csis@11880000 {
-		compatible = "samsung,exynos4210-csis";
-		reg = <0x11880000 0x1000>;
-		interrupts = <0 78 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-/* Board properties */
-
-	csis_0: csis@11880000 {
-		clock-frequency = <166000000>;
-		vddio-supply = <&reg0>;
-		vddcore-supply = <&reg1>;
-		port {
-			reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */
-			csis0_ep: endpoint {
-				remote-endpoint = <...>;
-				data-lanes = <1>, <2>;
-				samsung,csis-hs-settle = <12>;
-			};
-		};
-	};