diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy')
| -rw-r--r-- | Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt | 20 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml | 53 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/phy/intel,keembay-phy-usb.yaml (renamed from Documentation/devicetree/bindings/phy/intel,phy-keembay-usb.yaml) | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/phy/mediatek,tphy.yaml | 30 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 15 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt | 82 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml | 103 |
10 files changed, 203 insertions, 108 deletions
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt deleted file mode 100644 index 7c70f2ad9942..000000000000 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Freescale i.MX8MQ USB3 PHY binding - -Required properties: -- compatible: Should be "fsl,imx8mq-usb-phy" or "fsl,imx8mp-usb-phy" -- #phys-cells: must be 0 (see phy-bindings.txt in this directory) -- reg: The base address and length of the registers -- clocks: phandles to the clocks for each clock listed in clock-names -- clock-names: must contain "phy" - -Optional properties: -- vbus-supply: A phandle to the regulator for USB VBUS. - -Example: - usb3_phy0: phy@381f0040 { - compatible = "fsl,imx8mq-usb-phy"; - reg = <0x381f0040 0x40>; - clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; - clock-names = "phy"; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml new file mode 100644 index 000000000000..2936f3510a6a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MQ USB3 PHY binding + +maintainers: + - Li Jun <jun.li@nxp.com> + +properties: + compatible: + enum: + - fsl,imx8mq-usb-phy + - fsl,imx8mp-usb-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: phy + + vbus-supply: + description: + A phandle to the regulator for USB VBUS. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + usb3_phy0: phy@381f0040 { + compatible = "fsl,imx8mq-usb-phy"; + reg = <0x381f0040 0x40>; + clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; + clock-names = "phy"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/intel,phy-keembay-usb.yaml b/Documentation/devicetree/bindings/phy/intel,keembay-phy-usb.yaml index a217bb8ac5bc..52815b6c2b88 100644 --- a/Documentation/devicetree/bindings/phy/intel,phy-keembay-usb.yaml +++ b/Documentation/devicetree/bindings/phy/intel,keembay-phy-usb.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/phy/intel,phy-keembay-usb.yaml# +$id: http://devicetree.org/schemas/phy/intel,keembay-phy-usb.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel Keem Bay USB PHY bindings diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index ef9d9d4e6875..9e6c0f43f1c6 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -15,7 +15,7 @@ description: | controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA. Layout differences of banks between T-PHY V1 (mt8173/mt2701) and - T-PHY V2 (mt2712) when works on USB mode: + T-PHY V2 (mt2712) / V3 (mt8195) when works on USB mode: ----------------------------------- Version 1: port offset bank @@ -34,7 +34,7 @@ description: | u2 port2 0x1800 U2PHY_COM ... - Version 2: + Version 2/3: port offset bank u2 port0 0x0000 MISC 0x0100 FMREG @@ -59,7 +59,8 @@ description: | SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back into each port; a new bank MISC for u2 ports and CHIP for u3 ports are - added on V2. + added on V2; the FMREG bank for slew rate calibration is not used anymore + and reserved on V3; properties: $nodename: @@ -79,8 +80,11 @@ properties: - mediatek,mt2712-tphy - mediatek,mt7629-tphy - mediatek,mt8183-tphy - - mediatek,mt8195-tphy - const: mediatek,generic-tphy-v2 + - items: + - enum: + - mediatek,mt8195-tphy + - const: mediatek,generic-tphy-v3 - const: mediatek,mt2701-u3phy deprecated: true - const: mediatek,mt2712-u3phy @@ -91,7 +95,7 @@ properties: description: Register shared by multiple ports, exclude port's private register. It is needed for T-PHY V1, such as mt2701 and mt8173, but not for - T-PHY V2, such as mt2712. + T-PHY V2/V3, such as mt2712. maxItems: 1 "#address-cells": @@ -197,6 +201,22 @@ patternProperties: Specify the flag to enable BC1.2 if support it type: boolean + mediatek,syscon-type: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + A phandle to syscon used to access the register of type switch, + the field should always be 3 cells long. + items: + items: + - description: + The first cell represents a phandle to syscon + - description: + The second cell represents the register offset + - description: + The third cell represents the index of config segment + enum: [0, 1, 2, 3] + required: - reg - "#phy-cells" diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index f0497b8623ad..75be5650a198 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -18,6 +18,7 @@ properties: compatible: enum: - qcom,ipq6018-qmp-pcie-phy + - qcom,ipq6018-qmp-usb3-phy - qcom,ipq8074-qmp-pcie-phy - qcom,ipq8074-qmp-usb3-phy - qcom,msm8996-qmp-pcie-phy @@ -27,6 +28,7 @@ properties: - qcom,msm8998-qmp-ufs-phy - qcom,msm8998-qmp-usb3-phy - qcom,sc7180-qmp-usb3-phy + - qcom,sc8180x-qmp-pcie-phy - qcom,sc8180x-qmp-ufs-phy - qcom,sc8180x-qmp-usb3-phy - qcom,sdm845-qhp-pcie-phy @@ -34,6 +36,7 @@ properties: - qcom,sdm845-qmp-ufs-phy - qcom,sdm845-qmp-usb3-phy - qcom,sdm845-qmp-usb3-uni-phy + - qcom,sm6115-qmp-ufs-phy - qcom,sm8150-qmp-ufs-phy - qcom,sm8150-qmp-usb3-phy - qcom,sm8150-qmp-usb3-uni-phy @@ -326,6 +329,7 @@ allOf: compatible: contains: enum: + - qcom,sc8180x-qmp-pcie-phy - qcom,sdm845-qhp-pcie-phy - qcom,sdm845-qmp-pcie-phy - qcom,sdx55-qmp-pcie-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml index 217aa6c91893..1d49cc3d4eae 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -14,6 +14,7 @@ properties: compatible: enum: - qcom,sc7180-qmp-usb3-dp-phy + - qcom,sc8180x-qmp-usb3-dp-phy - qcom,sdm845-qmp-usb3-dp-phy - qcom,sm8250-qmp-usb3-dp-phy reg: diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml index d5dc5a3cdceb..3a6e1165419c 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -30,6 +30,11 @@ properties: - renesas,usb2-phy-r8a77995 # R-Car D3 - const: renesas,rcar-gen3-usb2-phy + - items: + - enum: + - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC} + - const: renesas,rzg2l-usb2-phy # RZ/G2L family + reg: maxItems: 1 @@ -91,6 +96,16 @@ required: - clocks - '#phy-cells' +allOf: + - if: + properties: + compatible: + contains: + const: renesas,rzg2l-usb2-phy + then: + required: + - resets + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml index 636cc501b54f..f6ed1a005e7a 100644 --- a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - samsung,exynos7-ufs-phy + - samsung,exynosautov9-ufs-phy reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt deleted file mode 100644 index 64b286d2d398..000000000000 --- a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt +++ /dev/null @@ -1,82 +0,0 @@ -TI AM654 SERDES - -Required properties: - - compatible: Should be "ti,phy-am654-serdes" - - reg : Address and length of the register set for the device. - - #phy-cells: determine the number of cells that should be given in the - phandle while referencing this phy. Should be "2". The 1st cell - corresponds to the phy type (should be one of the types specified in - include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes - lane function. - If SERDES0 is referenced 2nd cell should be: - 0 - USB3 - 1 - PCIe0 Lane0 - 2 - ICSS2 SGMII Lane0 - If SERDES1 is referenced 2nd cell should be: - 0 - PCIe1 Lane0 - 1 - PCIe0 Lane1 - 2 - ICSS2 SGMII Lane1 - - power-domains: As documented by the generic PM domain bindings in - Documentation/devicetree/bindings/power/power_domain.txt. - - clocks: List of clock-specifiers representing the input to the SERDES. - Should have 3 items representing the left input clock, external - reference clock and right input clock in that order. - - clock-output-names: List of clock names for each of the clock outputs of - SERDES. Should have 3 items for CMU reference clock, - left output clock and right output clock in that order. - - assigned-clocks: As defined in - Documentation/devicetree/bindings/clock/clock-bindings.txt - - assigned-clock-parents: As defined in - Documentation/devicetree/bindings/clock/clock-bindings.txt - - #clock-cells: Should be <1> to choose between the 3 output clocks. - Defined in Documentation/devicetree/bindings/clock/clock-bindings.txt - - The following macros are defined in dt-bindings/phy/phy-am654-serdes.h - for selecting the correct reference clock. This can be used while - specifying the clocks created by SERDES. - => AM654_SERDES_CMU_REFCLK - => AM654_SERDES_LO_REFCLK - => AM654_SERDES_RO_REFCLK - - - mux-controls: Phandle to the multiplexer that is used to select the lane - function. See #phy-cells above to see the multiplex values. - -Example: - -Example for SERDES0 is given below. It has 3 clock inputs; -left input reference clock as indicated by <&k3_clks 153 4>, external -reference clock as indicated by <&k3_clks 153 1> and right input -reference clock as indicated by <&serdes1 AM654_SERDES_LO_REFCLK>. (The -right input of SERDES0 is connected to the left output of SERDES1). - -SERDES0 registers 3 clock outputs as indicated in clock-output-names. The -first refers to the CMU reference clock, second refers to the left output -reference clock and the third refers to the right output reference clock. - -The assigned-clocks and assigned-clock-parents is used here to set the -parent of left input reference clock to MAINHSDIV_CLKOUT4 and parent of -CMU reference clock to left input reference clock. - -serdes0: serdes@900000 { - compatible = "ti,phy-am654-serdes"; - reg = <0x0 0x900000 0x0 0x2000>; - reg-names = "serdes"; - #phy-cells = <2>; - power-domains = <&k3_pds 153>; - clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, - <&serdes1 AM654_SERDES_LO_REFCLK>; - clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", - "serdes0_ro_refclk"; - assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; - assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; - ti,serdes-clk = <&serdes0_clk>; - mux-controls = <&serdes_mux 0>; - #clock-cells = <1>; -}; - -Example for PCIe consumer node using the SERDES PHY specifier is given below. -&pcie0_rc { - num-lanes = <2>; - phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>; - phy-names = "pcie-phy0", "pcie-phy1"; -}; diff --git a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml new file mode 100644 index 000000000000..62dcb84c08aa --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/ti,phy-am654-serdes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI AM654 SERDES binding + +description: + This binding describes the TI AM654 SERDES. AM654 SERDES can be configured + to be used with either PCIe or USB or SGMII. + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + +properties: + compatible: + enum: + - ti,phy-am654-serdes + + reg: + maxItems: 1 + + reg-names: + items: + - const: serdes + + power-domains: + maxItems: 1 + + clocks: + maxItems: 3 + description: + Three input clocks referring to left input reference clock, refclk and right input reference + clock. + + assigned-clocks: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + assigned-clock-parents: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + + '#phy-cells': + const: 2 + description: + The 1st cell corresponds to the phy type (should be one of the types specified in + include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes lane function. + + ti,serdes-clk: + description: Phandle to the SYSCON entry required for configuring SERDES clock selection. + $ref: /schemas/types.yaml#/definitions/phandle + + '#clock-cells': + const: 1 + + mux-controls: + maxItems: 1 + description: Phandle to the SYSCON entry required for configuring SERDES lane function. + + clock-output-names: + oneOf: + - description: Clock output names for SERDES 0 + items: + - const: serdes0_cmu_refclk + - const: serdes0_lo_refclk + - const: serdes0_ro_refclk + - description: Clock output names for SERDES 1 + items: + - const: serdes1_cmu_refclk + - const: serdes1_lo_refclk + - const: serdes1_ro_refclk + +required: + - compatible + - reg + - power-domains + - clocks + - assigned-clocks + - assigned-clock-parents + - ti,serdes-clk + - mux-controls + - clock-output-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy-am654-serdes.h> + + serdes0: serdes@900000 { + compatible = "ti,phy-am654-serdes"; + reg = <0x900000 0x2000>; + reg-names = "serdes"; + #phy-cells = <2>; + power-domains = <&k3_pds 153>; + clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, + <&serdes1 AM654_SERDES_LO_REFCLK>; + clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk"; + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; + ti,serdes-clk = <&serdes0_clk>; + mux-controls = <&serdes_mux 0>; + #clock-cells = <1>; + }; |