diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/usb251xb.txt | 89 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/usb251xb.yaml | 271 |
2 files changed, 271 insertions, 89 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt deleted file mode 100644 index 1a934eab175e..000000000000 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ /dev/null @@ -1,89 +0,0 @@ -Microchip USB 2.0 Hi-Speed Hub Controller - -The device node for the configuration of a Microchip USB251x/xBi USB 2.0 -Hi-Speed Controller. - -Required properties : - - compatible : Should be "microchip,usb251xb" or one of the specific types: - "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", - "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi", - "microchip,usb2517", "microchip,usb2517i", "microchip,usb2422" - - reg : I2C address on the selected bus (default is <0x2C>) - -Optional properties : - - reset-gpios : Should specify the gpio for hub reset - - vdd-supply : Should specify the phandle to the regulator supplying vdd - - skip-config : Skip Hub configuration, but only send the USB-Attach command - - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424) - - product-id : Set USB Product ID of the hub (16 bit, default depends on type) - - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3) - - language-id : Set USB Language ID (16 bit, default is 0x0000) - - manufacturer : Set USB Manufacturer string (max 31 characters long) - - product : Set USB Product string (max 31 characters long) - - serial : Set USB Serial string (max 31 characters long) - - {bus,self}-powered : selects between self- and bus-powered operation - (boolean, default is self-powered) - - disable-hi-speed : disable USB Hi-Speed support (boolean) - - {multi,single}-tt : selects between multi- and single-transaction-translator - (boolean, default is multi-tt) - - disable-eop : disable End of Packet generation in full-speed mode (boolean) - - {ganged,individual}-sensing : select over-current sense type in self-powered - mode (boolean, default is individual) - - {ganged,individual}-port-switching : select port power switching mode - (boolean, default is individual) - - dynamic-power-switching : enable auto-switching from self- to bus-powered - operation if the local power source is removed or unavailable (boolean) - - oc-delay-us : Delay time (in microseconds) for filtering the over-current - sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If - an invalid value is given, the default is used instead. - - compound-device : indicate the hub is part of a compound device (boolean) - - port-mapping-mode : enable port mapping mode (boolean) - - led-{usb,speed}-mode : led usb/speed indication mode selection - (boolean, default is speed mode) - - string-support : enable string descriptor support (required for manufacturer, - product and serial string configuration) - - non-removable-ports : Should specify the ports which have a non-removable - device connected. - - sp-disabled-ports : Specifies the ports which will be self-power disabled - - bp-disabled-ports : Specifies the ports which will be bus-power disabled - - sp-max-total-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry including a permanently - attached peripheral (range: 0 - 100000 uA, default 1000 uA) - - bp-max-total-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry including a permanently - attached peripheral (range: 0 - 510000 uA, default 100000 uA) - - sp-max-removable-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry excluding a permanently - attached peripheral (range: 0 - 100000 uA, default 1000 uA) - - bp-max-removable-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry excluding a permanently - attached peripheral (range: 0 - 510000 uA, default 100000 uA) - - power-on-time-ms : Specifies the time it takes from the time the host - initiates the power-on sequence to a port until the port has adequate - power. The value is given in ms in a 0 - 510 range (default is 100ms). - - swap-dx-lanes : Specifies the ports which will swap the differential-pair - (D+/D-), default is not-swapped. - -Examples: - usb2512b@2c { - compatible = "microchip,usb2512b"; - reg = <0x2c>; - reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - usb2514b@2c { - compatible = "microchip,usb2514b"; - reg = <0x2c>; - vendor-id = /bits/ 16 <0x0000>; - product-id = /bits/ 16 <0x0000>; - string-support; - manufacturer = "Foo"; - product = "Foo-Bar"; - serial = "1234567890A"; - /* correct misplaced usb connectors on port 1,2 */ - swap-dx-lanes = <1 2>; - }; diff --git a/Documentation/devicetree/bindings/usb/usb251xb.yaml b/Documentation/devicetree/bindings/usb/usb251xb.yaml new file mode 100644 index 000000000000..4d1530816817 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb251xb.yaml @@ -0,0 +1,271 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb251xb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip USB 2.0 Hi-Speed Hub Controller + +maintainers: + - Richard Leitner <richard.leitner@skidata.com> + +properties: + compatible: + enum: + - microchip,usb2422 + - microchip,usb2512b + - microchip,usb2512bi + - microchip,usb2513b + - microchip,usb2513bi + - microchip,usb2514b + - microchip,usb2514bi + - microchip,usb2517 + - microchip,usb2517i + - microchip,usb251xb + + reg: + maxItems: 1 + + reset-gpios: + description: | + Should specify the gpio for hub reset + + vdd-supply: + description: | + Should specify the phandle to the regulator supplying vdd + + skip-config: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Skip Hub configuration, but only send the USB-Attach command + + vendor-id: + $ref: /schemas/types.yaml#/definitions/uint16 + default: 0x0424 + description: | + Set USB Vendor ID of the hub + + product-id: + $ref: /schemas/types.yaml#/definitions/uint16 + description: | + Set USB Product ID of the hub + + device-id: + $ref: /schemas/types.yaml#/definitions/uint16 + default: 0x0bb3 + description: | + Set USB Device ID of the hub + + language-id: + $ref: /schemas/types.yaml#/definitions/uint16 + default: 0x0000 + description: | + Set USB Language ID + + manufacturer: + $ref: /schemas/types.yaml#/definitions/string + description: | + Set USB Manufacturer string (max 31 characters long) + + product: + $ref: /schemas/types.yaml#/definitions/string + description: | + Set USB Product string (max 31 characters long) + + serial: + $ref: /schemas/types.yaml#/definitions/string + description: | + Set USB Serial string (max 31 characters long) + + bus-powered: + $ref: /schemas/types.yaml#/definitions/flag + description: | + selects between self- and bus-powered operation + (boolean, default is self-powered) + + self-powered: + $ref: /schemas/types.yaml#/definitions/flag + description: | + selects between self- and bus-powered operation + (boolean, default is self-powered) + + disable-hi-speed: + $ref: /schemas/types.yaml#/definitions/flag + description: | + disable USB Hi-Speed support (boolean) + + multi-tt: + $ref: /schemas/types.yaml#/definitions/flag + description: | + selects between multi- and single-transaction-translator + (boolean, default is multi-tt) + + single-tt: + $ref: /schemas/types.yaml#/definitions/flag + description: | + selects between multi- and single-transaction-translator + (boolean, default is multi-tt) + + disable-eop: + $ref: /schemas/types.yaml#/definitions/flag + description: | + disable End of Packet generation in full-speed mode (boolean) + + ganged-sensing: + $ref: /schemas/types.yaml#/definitions/flag + description: | + select over-current sense type in self-powered mode + (boolean, default is individual) + + individual-sensing: + $ref: /schemas/types.yaml#/definitions/flag + description: | + select over-current sense type in self-powered mode + (boolean, default is individual) + + ganged-port-switching: + $ref: /schemas/types.yaml#/definitions/flag + description: | + select port power switching mode (boolean, default is individual) + + individual-port-switching: + $ref: /schemas/types.yaml#/definitions/flag + description: | + select port power switching mode (boolean, default is individual) + + dynamic-power-switching: + $ref: /schemas/types.yaml#/definitions/flag + description: | + enable auto-switching from self- to bus-powered operation if the + local power source is removed or unavailable (boolean) + + oc-delay-us: + enum: [100, 4000, 8000, 16000] + default: 8000 + description: | + Delay time (in microseconds) for filtering the over-current sense + inputs. If an invalid value is given, the default is used instead. + + compound-device: + $ref: /schemas/types.yaml#/definitions/flag + description: | + indicate the hub is part of a compound device (boolean) + + port-mapping-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: | + enable port mapping mode (boolean) + + led-usb-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: | + led usb/speed indication mode selection (boolean, default is speed mode) + + led-speed-mode: + $ref: /schemas/types.yaml#/definitions/flag + description: | + led usb/speed indication mode selection (boolean, default is speed mode) + + string-support: + $ref: /schemas/types.yaml#/definitions/flag + description: | + enable string descriptor support (required for manufacturer, product + and serial string configuration) + + non-removable-ports: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: | + Should specify the ports which have a non-removable device connected. + + sp-disabled-ports: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: | + Specifies the ports which will be self-power disabled + + bp-disabled-ports: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: | + Specifies the ports which will be bus-power disabled + + sp-max-total-current-microamp: + maximum: 100000 + default: 1000 + description: | + Specifies max current consumed by the hub from VBUS when + operating in self-powered hub. It includes the hub silicon + along with all associated circuitry including a permanently + attached peripheral. + + bp-max-total-current-microamp: + maximum: 510000 + default: 100000 + description: | + Specifies max current consumed by the hub from VBUS when + operating in self-powered hub. It includes the hub silicon + along with all associated circuitry including a permanently + attached peripheral. + + sp-max-removable-current-microamp: + maximum: 100000 + default: 1000 + description: | + Specifies max current consumed by the hub from VBUS when + operating in self-powered hub. It includes the hub silicon + along with all associated circuitry excluding a permanently + attached peripheral. + + bp-max-removable-current-microamp: + maximum: 510000 + default: 100000 + description: | + Specifies max current consumed by the hub from VBUS when + operating in self-powered hub. It includes the hub silicon + along with all associated circuitry excluding a permanently + attached peripheral. + + power-on-time-ms: + maximum: 510 + default: 100 + description: | + Specifies the time it takes from the time the host initiates the + power-on sequence to a port until the port has adequate power. + + swap-dx-lanes: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: | + Specifies the ports which will swap the differential-pair (D+/D-), + default is not-swapped. + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + usb-hub@2c { + compatible = "microchip,usb2512b"; + reg = <0x2c>; + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + usb-hub@2d { + compatible = "microchip,usb2514b"; + reg = <0x2d>; + vendor-id = /bits/ 16 <0x0000>; + product-id = /bits/ 16 <0x0000>; + string-support; + manufacturer = "Foo"; + product = "Foo-Bar"; + serial = "1234567890A"; + /* correct misplaced usb connectors on port 1,2 */ + swap-dx-lanes = <1 2>; + }; + }; |