summaryrefslogtreecommitdiff
path: root/arch/arm/mach-ux500/board-mop500.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500.h')
-rw-r--r--arch/arm/mach-ux500/board-mop500.h69
1 files changed, 0 insertions, 69 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index bb408b8f48de..32cc0d8d8a0e 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -7,78 +7,9 @@
#ifndef __BOARD_MOP500_H
#define __BOARD_MOP500_H
-/* For NOMADIK_NR_GPIO */
-#include "irqs.h"
#include <linux/platform_data/asoc-ux500-msp.h>
#include <linux/amba/mmci.h>
-/* Snowball specific GPIO assignments, this board has no GPIO expander */
-#define SNOWBALL_ACCEL_INT1_GPIO 163
-#define SNOWBALL_ACCEL_INT2_GPIO 164
-#define SNOWBALL_MAGNET_DRDY_GPIO 165
-#define SNOWBALL_SDMMC_EN_GPIO 217
-#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
-#define SNOWBALL_SDMMC_CD_GPIO 218
-
-/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
-#define HREFV60_SDMMC_1V8_3V_GPIO 5
-#define HREFV60_CAMERA_FLASH_ENABLE 21
-#define HREFV60_MAGNET_DRDY_GPIO 32
-#define HREFV60_DISP1_RST_GPIO 65
-#define HREFV60_DISP2_RST_GPIO 66
-#define HREFV60_ACCEL_INT1_GPIO 82
-#define HREFV60_ACCEL_INT2_GPIO 83
-#define HREFV60_SDMMC_CD_GPIO 95
-#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
-#define HREFV60_TOUCH_RST_GPIO 143
-#define HREFV60_HAL_SW_GPIO 145
-#define HREFV60_SDMMC_EN_GPIO 169
-#define HREFV60_MMIO_XENON_CHARGE 170
-#define HREFV60_PROX_SENSE_GPIO 217
-
-/* MOP500 generic GPIOs */
-#define CAMERA_FLASH_INT_PIN 7
-#define CYPRESS_TOUCH_INT_PIN 84
-#define XSHUTDOWN_PRIMARY_SENSOR 141
-#define XSHUTDOWN_SECONDARY_SENSOR 142
-#define CYPRESS_TOUCH_RST_GPIO 143
-#define MOP500_HDMI_RST_GPIO 196
-#define CYPRESS_SLAVE_SELECT_GPIO 216
-
-/* GPIOs on the TC35892 expander */
-#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x))
-#define GPIO_MAGNET_DRDY MOP500_EGPIO(1)
-#define GPIO_SDMMC_CD MOP500_EGPIO(3)
-#define GPIO_CAMERA_FLASH_ENABLE MOP500_EGPIO(4)
-#define GPIO_MMIO_XENON_CHARGE MOP500_EGPIO(5)
-#define GPIO_PROX_SENSOR MOP500_EGPIO(7)
-#define GPIO_HAL_SENSOR MOP500_EGPIO(8)
-#define GPIO_ACCEL_INT1 MOP500_EGPIO(10)
-#define GPIO_ACCEL_INT2 MOP500_EGPIO(11)
-#define GPIO_BU21013_CS MOP500_EGPIO(13)
-#define MOP500_DISP2_RST_GPIO MOP500_EGPIO(14)
-#define MOP500_DISP1_RST_GPIO MOP500_EGPIO(15)
-#define GPIO_SDMMC_EN MOP500_EGPIO(17)
-#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18)
-#define MOP500_EGPIO_END MOP500_EGPIO(24)
-
-/*
- * GPIOs on the AB8500 mixed-signals circuit
- * Notice that we subtract 1 from the number passed into the macro, this is
- * because the AB8500 GPIO pins are enumbered starting from 1, so the value in
- * parens matches the GPIO pin number in the data sheet.
- */
-#define MOP500_AB8500_PIN_GPIO(x) (MOP500_EGPIO_END + (x) - 1)
-/*Snowball AB8500 GPIO */
-#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */
-#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */
-#define SNOWBALL_WLAN_CLK_REQ_GPIO MOP500_AB8500_PIN_GPIO(3) /* SYSCLKREQ4/GPIO3 */
-#define SNOWBALL_PM_GPIO4_GPIO MOP500_AB8500_PIN_GPIO(4) /* SYSCLKREQ6/GPIO4 */
-#define SNOWBALL_EN_3V6_GPIO MOP500_AB8500_PIN_GPIO(16) /* PWMOUT3/GPIO16 */
-#define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */
-#define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */
-
-struct device;
extern struct mmci_platform_data mop500_sdi0_data;
extern struct mmci_platform_data mop500_sdi1_data;
extern struct mmci_platform_data mop500_sdi2_data;