summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-realview/Kconfig5
-rw-r--r--arch/arm/mach-realview/core.c21
-rw-r--r--arch/arm/mach-realview/include/mach/memory.h49
-rw-r--r--arch/arm/mach-realview/realview_pbx.c22
4 files changed, 94 insertions, 3 deletions
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dfc9b0bc6eb2..c48e1f2c3349 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -70,6 +70,8 @@ config MACH_REALVIEW_PBX
bool "Support RealView/PBX platform"
select ARM_GIC
select HAVE_PATA_PLATFORM
+ select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET
+ select ZONE_DMA if SPARSEMEM
help
Include support for the ARM(R) RealView PBX platform.
@@ -82,6 +84,7 @@ config REALVIEW_HIGH_PHYS_OFFSET
0x70000000, 256MB of which being mirrored at 0x00000000. If
the board supports 512MB of RAM, this option allows the
memory to be accessed contiguously at the high physical
- offset.
+ offset. On the PBX board, disabling this option allows 1GB of
+ RAM to be used with SPARSEMEM.
endmenu
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index c21b0fd39652..9f293438e020 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -59,6 +59,25 @@
/* used by entry-macro.S and platsmp.c */
void __iomem *gic_cpu_base_addr;
+#ifdef CONFIG_ZONE_DMA
+/*
+ * Adjust the zones if there are restrictions for DMA access.
+ */
+void __init realview_adjust_zones(int node, unsigned long *size,
+ unsigned long *hole)
+{
+ unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
+
+ if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
+ return;
+
+ size[ZONE_NORMAL] = size[0] - dma_size;
+ size[ZONE_DMA] = dma_size;
+ hole[ZONE_NORMAL] = hole[0];
+ hole[ZONE_DMA] = 0;
+}
+#endif
+
/*
* This is the RealView sched_clock implementation. This has
* a resolution of 41.7ns, and a maximum value of about 179s.
@@ -543,7 +562,7 @@ static int realview_clcd_setup(struct clcd_fb *fb)
fb->panel = realview_clcd_panel();
fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
- &dma, GFP_KERNEL);
+ &dma, GFP_KERNEL | GFP_DMA);
if (!fb->fb.screen_base) {
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
return -ENOMEM;
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 293c30025e7e..2417bbcf97fd 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -29,4 +29,53 @@
#define PHYS_OFFSET UL(0x00000000)
#endif
+#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
+extern void realview_adjust_zones(int node, unsigned long *size,
+ unsigned long *hole);
+#define arch_adjust_zones(node, size, hole) \
+ realview_adjust_zones(node, size, hole)
+
+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1)
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M)
+#endif
+
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * Sparsemem definitions for RealView PBX.
+ *
+ * The RealView PBX board has another block of 512MB of RAM at 0x20000000,
+ * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000)
+ * may be used for DMA.
+ *
+ * The macros below define a section size of 256MB and a non-linear virtual to
+ * physical mapping:
+ *
+ * 256MB @ 0x00000000 -> PAGE_OFFSET
+ * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000
+ * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000
+ */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET"
+#endif
+
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 28
+
+/* bank page offsets */
+#define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000)
+#define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000)
+
+#define __phys_to_virt(phys) \
+ ((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \
+ (phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \
+ (phys) + PAGE_OFFSET)
+
+#define __virt_to_phys(virt) \
+ ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 : \
+ (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 : \
+ (virt) - PAGE_OFFSET)
+
+#endif /* CONFIG_SPARSEMEM */
+
#endif
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 5d09d8b4a1cb..ec39488e2b42 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -304,6 +304,26 @@ static struct sys_timer realview_pbx_timer = {
.init = realview_pbx_timer_init,
};
+static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags,
+ char **from, struct meminfo *meminfo)
+{
+#ifdef CONFIG_SPARSEMEM
+ /*
+ * Memory configuration with SPARSEMEM enabled on RealView PBX (see
+ * asm/mach/memory.h for more information).
+ */
+ meminfo->bank[0].start = 0;
+ meminfo->bank[0].size = SZ_256M;
+ meminfo->bank[1].start = 0x20000000;
+ meminfo->bank[1].size = SZ_512M;
+ meminfo->bank[2].start = 0x80000000;
+ meminfo->bank[2].size = SZ_256M;
+ meminfo->nr_banks = 3;
+#else
+ realview_fixup(mdesc, tags, from, meminfo);
+#endif
+}
+
static void __init realview_pbx_init(void)
{
int i;
@@ -345,7 +365,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
.phys_io = REALVIEW_PBX_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
- .fixup = realview_fixup,
+ .fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_irq = gic_init_irq,
.timer = &realview_pbx_timer,