summaryrefslogtreecommitdiff
path: root/arch/microblaze
diff options
context:
space:
mode:
Diffstat (limited to 'arch/microblaze')
-rw-r--r--arch/microblaze/Kconfig11
-rw-r--r--arch/microblaze/configs/mmu_defconfig2
-rw-r--r--arch/microblaze/configs/nommu_defconfig2
-rw-r--r--arch/microblaze/include/asm/irqflags.h2
-rw-r--r--arch/microblaze/include/asm/pgtable.h33
-rw-r--r--arch/microblaze/include/asm/tlb.h1
-rw-r--r--arch/microblaze/kernel/cpu/pvr.c4
-rw-r--r--arch/microblaze/kernel/head.S29
-rw-r--r--arch/microblaze/kernel/hw_exception_handler.S4
-rw-r--r--arch/microblaze/kernel/prom.c4
-rw-r--r--arch/microblaze/kernel/setup.c4
-rw-r--r--arch/microblaze/lib/fastcopy.S4
12 files changed, 52 insertions, 48 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 5f5018a71a3d..31680032053e 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -15,6 +15,8 @@ config MICROBLAZE
select TRACING_SUPPORT
select OF
select OF_EARLY_FLATTREE
+ select HAVE_GENERIC_HARDIRQS
+ select GENERIC_IRQ_PROBE
config SWAP
def_bool n
@@ -37,12 +39,6 @@ config GENERIC_FIND_NEXT_BIT
config GENERIC_HWEIGHT
def_bool y
-config GENERIC_HARDIRQS
- def_bool y
-
-config GENERIC_IRQ_PROBE
- def_bool y
-
config GENERIC_CALIBRATE_DELAY
def_bool y
@@ -52,9 +48,6 @@ config GENERIC_TIME_VSYSCALL
config GENERIC_CLOCKEVENTS
def_bool y
-config GENERIC_HARDIRQS_NO__DO_IRQ
- def_bool y
-
config GENERIC_GPIO
def_bool y
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index ab8fbe7ad90b..b3f5eecff2a7 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -7,7 +7,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
CONFIG_INITRAMFS_COMPRESSION_GZIP=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_HOTPLUG is not set
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
index ebc143c5368e..0249e4b7e1d3 100644
--- a/arch/microblaze/configs/nommu_defconfig
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -6,7 +6,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_HOTPLUG is not set
diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h
index 5fd31905775d..c4532f032b3b 100644
--- a/arch/microblaze/include/asm/irqflags.h
+++ b/arch/microblaze/include/asm/irqflags.h
@@ -12,7 +12,7 @@
#include <linux/types.h>
#include <asm/registers.h>
-#ifdef CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
static inline unsigned long arch_local_irq_save(void)
{
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index cae268c22ba2..885574a73f01 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -411,20 +411,19 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
static inline unsigned long pte_update(pte_t *p, unsigned long clr,
unsigned long set)
{
- unsigned long old, tmp, msr;
-
- __asm__ __volatile__("\
- msrclr %2, 0x2\n\
- nop\n\
- lw %0, %4, r0\n\
- andn %1, %0, %5\n\
- or %1, %1, %6\n\
- sw %1, %4, r0\n\
- mts rmsr, %2\n\
- nop"
- : "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
- : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p)
- : "cc");
+ unsigned long flags, old, tmp;
+
+ raw_local_irq_save(flags);
+
+ __asm__ __volatile__( "lw %0, %2, r0 \n"
+ "andn %1, %0, %3 \n"
+ "or %1, %1, %4 \n"
+ "sw %1, %2, r0 \n"
+ : "=&r" (old), "=&r" (tmp)
+ : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set)
+ : "cc");
+
+ raw_local_irq_restore(flags);
return old;
}
@@ -444,8 +443,9 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
*ptep = pte;
}
-static inline int ptep_test_and_clear_young(struct mm_struct *mm,
- unsigned long addr, pte_t *ptep)
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep)
{
return (pte_update(ptep, _PAGE_ACCESSED, 0) & _PAGE_ACCESSED) != 0;
}
@@ -457,6 +457,7 @@ static inline int ptep_test_and_clear_dirty(struct mm_struct *mm,
(_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0;
}
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h
index e8abd4a0349c..8aa97817cc8c 100644
--- a/arch/microblaze/include/asm/tlb.h
+++ b/arch/microblaze/include/asm/tlb.h
@@ -13,6 +13,7 @@
#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+#include <linux/pagemap.h>
#include <asm-generic/tlb.h>
#ifdef CONFIG_MMU
diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c
index e01afa68273e..488c1ed24e38 100644
--- a/arch/microblaze/kernel/cpu/pvr.c
+++ b/arch/microblaze/kernel/cpu/pvr.c
@@ -27,7 +27,7 @@
register unsigned tmp __asm__("r3"); \
tmp = 0x0; /* Prevent warning about unused */ \
__asm__ __volatile__ ( \
- "mfs %0, rpvr" #pvrid ";" \
+ "mfs %0, rpvr" #pvrid ";" \
: "=r" (tmp) : : "memory"); \
val = tmp; \
}
@@ -54,7 +54,7 @@ int cpu_has_pvr(void)
if (!(flags & PVR_MSR_BIT))
return 0;
- get_single_pvr(0x00, pvr0);
+ get_single_pvr(0, pvr0);
pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0);
if (pvr0 & PVR0_PVR_FULL_MASK)
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 42434008209e..778a5ce2e4fc 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -62,23 +62,32 @@ real_start:
andi r1, r1, ~2
mts rmsr, r1
/*
- * Here is checking mechanism which check if Microblaze has msr instructions
- * We load msr and compare it with previous r1 value - if is the same,
- * msr instructions works if not - cpu don't have them.
+ * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc'
+ * if the msrclr instruction is not enabled. We use this to detect
+ * if the opcode is available, by issuing msrclr and then testing the result.
+ * r8 == 0 - msr instructions are implemented
+ * r8 != 0 - msr instructions are not implemented
*/
- /* r8=0 - I have msr instr, 1 - I don't have them */
- rsubi r0, r0, 1 /* set the carry bit */
- msrclr r0, 0x4 /* try to clear it */
- /* read the carry bit, r8 will be '0' if msrclr exists */
- addik r8, r0, 0
+ msrclr r8, 0 /* clear nothing - just read msr for test */
+ cmpu r8, r8, r1 /* r1 must contain msr reg content */
/* r7 may point to an FDT, or there may be one linked in.
if it's in r7, we've got to save it away ASAP.
We ensure r7 points to a valid FDT, just in case the bootloader
is broken or non-existent */
beqi r7, no_fdt_arg /* NULL pointer? don't copy */
- lw r11, r0, r7 /* Does r7 point to a */
- rsubi r11, r11, OF_DT_HEADER /* valid FDT? */
+/* Does r7 point to a valid FDT? Load HEADER magic number */
+ /* Run time Big/Little endian platform */
+ /* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */
+ addik r11, r0, 0x1 /* BIG/LITTLE checking value */
+ /* __bss_start will be zeroed later - it is just temp location */
+ swi r11, r0, TOPHYS(__bss_start)
+ lbui r11, r0, TOPHYS(__bss_start)
+ beqid r11, big_endian /* DO NOT break delay stop dependency */
+ lw r11, r0, r7 /* Big endian load in delay slot */
+ lwr r11, r0, r7 /* Little endian load */
+big_endian:
+ rsubi r11, r11, OF_DT_HEADER /* Check FDT header */
beqi r11, _prepare_copy_fdt
or r7, r0, r0 /* clear R7 when not valid DTB */
bnei r11, no_fdt_arg /* No - get out of here */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 25f6e07d8de8..782680de3121 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -147,10 +147,6 @@
#if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0
#define BSRLI(rD, rA, imm) \
bsrli rD, rA, imm
- #elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0
- #define BSRLI(rD, rA, imm) \
- ori rD, r0, (1 << imm); \
- idivu rD, rD, rA
#else
#define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA)
/* Only the used shift constants defined here - add more if needed */
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index c881393f07fd..bceaa5543e39 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -47,9 +47,9 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
memblock_add(base, size);
}
-u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
{
- return memblock_alloc(size, align);
+ return __va(memblock_alloc(size, align));
}
#ifdef CONFIG_EARLY_PRINTK
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index bb1558e4b283..9312fbb37efd 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -161,11 +161,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
if (msr)
eprintk("!!!Your kernel has setup MSR instruction but "
- "CPU don't have it %d\n", msr);
+ "CPU don't have it %x\n", msr);
#else
if (!msr)
eprintk("!!!Your kernel not setup MSR instruction but "
- "CPU have it %d\n", msr);
+ "CPU have it %x\n", msr);
#endif
for (src = __ivt_start; src < __ivt_end; src++, dst++)
diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S
index fdc48bb065d8..62021d7e249e 100644
--- a/arch/microblaze/lib/fastcopy.S
+++ b/arch/microblaze/lib/fastcopy.S
@@ -29,6 +29,10 @@
* between mem locations with size of xfer spec'd in bytes
*/
+#ifdef __MICROBLAZEEL__
+#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM.
+#endif
+
#include <linux/linkage.h>
.text
.globl memcpy