summaryrefslogtreecommitdiff
path: root/arch/powerpc/boot/dts/mpc8379_rdb.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8379_rdb.dts')
-rw-r--r--arch/powerpc/boot/dts/mpc8379_rdb.dts112
1 files changed, 56 insertions, 56 deletions
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 255d2e4fab50..0dda2fc558f8 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -30,7 +30,7 @@
PowerPC,8379@0 {
device_type = "cpu";
- reg = <0>;
+ reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <32768>;
@@ -51,22 +51,22 @@
#size-cells = <1>;
compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
- interrupts = <77 8>;
+ interrupts = <77 0x8>;
interrupt-parent = <&ipic>;
// CS0 and CS1 are swapped when
// booting from nand, but the
// addresses are the same.
- ranges = <0 0 0xfe000000 0x00800000
- 1 0 0xe0600000 0x00008000
- 2 0 0xf0000000 0x00020000
- 3 0 0xfa000000 0x00008000>;
+ ranges = <0x0 0x0 0xfe000000 0x00800000
+ 0x1 0x0 0xe0600000 0x00008000
+ 0x2 0x0 0xf0000000 0x00020000
+ 0x3 0x0 0xfa000000 0x00008000>;
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
- reg = <0 0 0x800000>;
+ reg = <0x0 0x0 0x800000>;
bank-width = <2>;
device-width = <1>;
};
@@ -76,7 +76,7 @@
#size-cells = <1>;
compatible = "fsl,mpc8379-fcm-nand",
"fsl,elbc-fcm-nand";
- reg = <1 0 0x8000>;
+ reg = <0x1 0x0 0x8000>;
u-boot@0 {
reg = <0x0 0x100000>;
@@ -97,7 +97,7 @@
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
- ranges = <0 0xe0000000 0x00100000>;
+ ranges = <0x0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
@@ -113,8 +113,8 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <14 8>;
- interrupt-parent = < &ipic >;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
device_type = "rtc";
@@ -129,8 +129,8 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <15 8>;
- interrupt-parent = < &ipic >;
+ interrupts = <15 0x8>;
+ interrupt-parent = <&ipic>;
dfsrr;
};
@@ -138,8 +138,8 @@
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x7000 0x1000>;
- interrupts = <16 8>;
- interrupt-parent = < &ipic >;
+ interrupts = <16 0x8>;
+ interrupt-parent = <&ipic>;
mode = "cpu";
};
@@ -149,8 +149,8 @@
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = < &ipic >;
- interrupts = <38 8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <38 0x8>;
phy_type = "utmi";
};
@@ -160,15 +160,15 @@
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
- interrupt-parent = < &ipic >;
- interrupts = <17 8>;
- reg = <2>;
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
- interrupt-parent = < &ipic >;
- interrupts = <18 8>;
- reg = <3>;
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -180,10 +180,10 @@
compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <32 8 33 8 34 8>;
+ interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
- interrupt-parent = < &ipic >;
- phy-handle = < &phy2 >;
+ interrupt-parent = <&ipic>;
+ phy-handle = <&phy2>;
};
enet1: ethernet@25000 {
@@ -193,10 +193,10 @@
compatible = "gianfar";
reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 8 36 8 37 8>;
+ interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
- interrupt-parent = < &ipic >;
- phy-handle = < &phy3 >;
+ interrupt-parent = <&ipic>;
+ phy-handle = <&phy3>;
};
serial0: serial@4500 {
@@ -205,8 +205,8 @@
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <9 8>;
- interrupt-parent = < &ipic >;
+ interrupts = <9 0x8>;
+ interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
@@ -215,8 +215,8 @@
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <10 8>;
- interrupt-parent = < &ipic >;
+ interrupts = <10 0x8>;
+ interrupt-parent = <&ipic>;
};
crypto@30000 {
@@ -224,8 +224,8 @@
device_type = "crypto";
compatible = "talitos";
reg = <0x30000 0x10000>;
- interrupts = <11 8>;
- interrupt-parent = < &ipic >;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
/* Rev. 3.0 geometry */
num-channels = <4>;
channel-fifo-len = <24>;
@@ -236,29 +236,29 @@
sata@18000 {
compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x18000 0x1000>;
- interrupts = <44 8>;
- interrupt-parent = < &ipic >;
+ interrupts = <44 0x8>;
+ interrupt-parent = <&ipic>;
};
sata@19000 {
compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x19000 0x1000>;
- interrupts = <45 8>;
- interrupt-parent = < &ipic >;
+ interrupts = <45 0x8>;
+ interrupt-parent = <&ipic>;
};
sata@1a000 {
compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x1a000 0x1000>;
- interrupts = <46 8>;
- interrupt-parent = < &ipic >;
+ interrupts = <46 0x8>;
+ interrupt-parent = <&ipic>;
};
sata@1b000 {
compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x1b000 0x1000>;
- interrupts = <47 8>;
- interrupt-parent = < &ipic >;
+ interrupts = <47 0x8>;
+ interrupt-parent = <&ipic>;
};
/* IPIC
@@ -282,23 +282,23 @@
/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
/* IDSEL AD14 IRQ6 inta */
- 0x7000 0 0 1 &ipic 22 8
+ 0x7000 0x0 0x0 0x1 &ipic 22 0x8
/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
- 0x7800 0 0 1 &ipic 21 8
- 0x7800 0 0 2 &ipic 22 8
- 0x7800 0 0 4 &ipic 23 8
+ 0x7800 0x0 0x0 0x1 &ipic 21 0x8
+ 0x7800 0x0 0x0 0x2 &ipic 22 0x8
+ 0x7800 0x0 0x0 0x4 &ipic 23 0x8
/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
- 0xE000 0 0 1 &ipic 23 8
- 0xE000 0 0 2 &ipic 21 8
- 0xE000 0 0 3 &ipic 22 8>;
- interrupt-parent = < &ipic >;
- interrupts = <66 8>;
- bus-range = <0 0>;
- ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
- 0x42000000 0 0x80000000 0x80000000 0 0x10000000
- 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
+ 0xE000 0x0 0x0 0x1 &ipic 23 0x8
+ 0xE000 0x0 0x0 0x2 &ipic 21 0x8
+ 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <66 0x8>;
+ bus-range = <0x0 0x0>;
+ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;