summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/qib/qib_iba7322.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_iba7322.c')
-rw-r--r--drivers/infiniband/hw/qib/qib_iba7322.c582
1 files changed, 179 insertions, 403 deletions
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 2c24eab35b54..23fb9efe20a4 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -114,40 +114,18 @@ static ushort qib_singleport;
module_param_named(singleport, qib_singleport, ushort, S_IRUGO);
MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space");
-
-/*
- * Setup QMH7342 receive and transmit parameters, necessary because
- * each bay, Mez connector, and IB port need different tuning, beyond
- * what the switch and HCA can do automatically.
- * It's expected to be done by cat'ing files to the modules file,
- * rather than setting up as a module parameter.
- * It's a "write-only" file, returns 0 when read back.
- * The unit, port, bay (if given), and values MUST be done as a single write.
- * The unit, port, and bay must precede the values to be effective.
- */
-static int setup_qmh_params(const char *, struct kernel_param *);
-static unsigned dummy_qmh_params;
-module_param_call(qmh_serdes_setup, setup_qmh_params, param_get_uint,
- &dummy_qmh_params, S_IWUSR | S_IRUGO);
-
-/* similarly for QME7342, but it's simpler */
-static int setup_qme_params(const char *, struct kernel_param *);
-static unsigned dummy_qme_params;
-module_param_call(qme_serdes_setup, setup_qme_params, param_get_uint,
- &dummy_qme_params, S_IWUSR | S_IRUGO);
-
#define MAX_ATTEN_LEN 64 /* plenty for any real system */
/* for read back, default index is ~5m copper cable */
-static char cable_atten_list[MAX_ATTEN_LEN] = "10";
-static struct kparam_string kp_cable_atten = {
- .string = cable_atten_list,
+static char txselect_list[MAX_ATTEN_LEN] = "10";
+static struct kparam_string kp_txselect = {
+ .string = txselect_list,
.maxlen = MAX_ATTEN_LEN
};
-static int setup_cable_atten(const char *, struct kernel_param *);
-module_param_call(cable_atten, setup_cable_atten, param_get_string,
- &kp_cable_atten, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(cable_atten, \
- "cable attenuation indices for cables with invalid EEPROM");
+static int setup_txselect(const char *, struct kernel_param *);
+module_param_call(txselect, setup_txselect, param_get_string,
+ &kp_txselect, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(txselect, \
+ "Tx serdes indices (for no QSFP or invalid QSFP data)");
#define BOARD_QME7342 5
#define BOARD_QMH7342 6
@@ -574,11 +552,12 @@ struct vendor_txdds_ent {
static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *);
#define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */
+#define TXDDS_EXTRA_SZ 11 /* number of extra tx settings entries */
#define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */
#define H1_FORCE_VAL 8
-#define H1_FORCE_QME 1 /* may be overridden via setup_qme_params() */
-#define H1_FORCE_QMH 7 /* may be overridden via setup_qmh_params() */
+#define H1_FORCE_QME 1 /* may be overridden via setup_txselect() */
+#define H1_FORCE_QMH 7 /* may be overridden via setup_txselect() */
/* The static and dynamic registers are paired, and the pairs indexed by spd */
#define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \
@@ -590,15 +569,6 @@ static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *);
#define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */
#define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */
-static const struct txdds_ent qmh_sdr_txdds = { 11, 0, 5, 6 };
-static const struct txdds_ent qmh_ddr_txdds = { 7, 0, 2, 8 };
-static const struct txdds_ent qmh_qdr_txdds = { 0, 1, 3, 10 };
-
-/* this is used for unknown mez cards also */
-static const struct txdds_ent qme_sdr_txdds = { 11, 0, 4, 4 };
-static const struct txdds_ent qme_ddr_txdds = { 7, 0, 2, 7 };
-static const struct txdds_ent qme_qdr_txdds = { 0, 1, 12, 11 };
-
struct qib_chippport_specific {
u64 __iomem *kpregbase;
u64 __iomem *cpregbase;
@@ -637,12 +607,8 @@ struct qib_chippport_specific {
* Per-bay per-channel rcv QMH H1 values and Tx values for QDR.
* entry zero is unused, to simplify indexing
*/
- u16 h1_val;
- u8 amp[SERDES_CHANS];
- u8 pre[SERDES_CHANS];
- u8 mainv[SERDES_CHANS];
- u8 post[SERDES_CHANS];
- u8 no_eep; /* attenuation index to use if no qsfp info */
+ u8 h1_val;
+ u8 no_eep; /* txselect table index to use if no qsfp info */
u8 ipg_tries;
u8 ibmalfusesnap;
struct qib_qsfp_data qsfp_data;
@@ -5360,7 +5326,13 @@ static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs)
QIBL_IB_AUTONEG_INPROG)))
set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled);
if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) {
+ /* unlock the Tx settings, speed may change */
+ qib_write_kreg_port(ppd, krp_tx_deemph_override,
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ reset_tx_deemphasis_override));
qib_cancel_sends(ppd);
+ /* on link down, ensure sane pcs state */
+ qib_7322_mini_pcs_reset(ppd);
spin_lock_irqsave(&ppd->sdma_lock, flags);
if (__qib_sdma_running(ppd))
__qib_sdma_process_event(ppd,
@@ -5766,26 +5738,28 @@ static void qib_init_7322_qsfp(struct qib_pportdata *ppd)
}
/*
- * called at device initialization time, and also if the cable_atten
+ * called at device initialization time, and also if the txselect
* module parameter is changed. This is used for cables that don't
* have valid QSFP EEPROMs (not present, or attenuation is zero).
* We initialize to the default, then if there is a specific
- * unit,port match, we use that.
+ * unit,port match, we use that (and set it immediately, for the
+ * current speed, if the link is at INIT or better).
* String format is "default# unit#,port#=# ... u,p=#", separators must
- * be a SPACE character. A newline terminates.
+ * be a SPACE character. A newline terminates. The u,p=# tuples may
+ * optionally have "u,p=#,#", where the final # is the H1 value
* The last specific match is used (actually, all are used, but last
* one is the one that winds up set); if none at all, fall back on default.
*/
static void set_no_qsfp_atten(struct qib_devdata *dd, int change)
{
char *nxt, *str;
- int pidx, unit, port, deflt;
+ u32 pidx, unit, port, deflt, h1;
unsigned long val;
- int any = 0;
+ int any = 0, seth1;
- str = cable_atten_list;
+ str = txselect_list;
- /* default number is validated in setup_cable_atten() */
+ /* default number is validated in setup_txselect() */
deflt = simple_strtoul(str, &nxt, 0);
for (pidx = 0; pidx < dd->num_pports; ++pidx)
dd->pport[pidx].cpspec->no_eep = deflt;
@@ -5812,16 +5786,28 @@ static void set_no_qsfp_atten(struct qib_devdata *dd, int change)
;
continue;
}
- if (val >= TXDDS_TABLE_SZ)
+ if (val >= TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)
continue;
+ seth1 = 0;
+ h1 = 0; /* gcc thinks it might be used uninitted */
+ if (*nxt == ',' && nxt[1]) {
+ str = ++nxt;
+ h1 = (u32)simple_strtoul(str, &nxt, 0);
+ if (nxt == str)
+ while (*nxt && *nxt++ != ' ') /* skip */
+ ;
+ else
+ seth1 = 1;
+ }
for (pidx = 0; dd->unit == unit && pidx < dd->num_pports;
++pidx) {
- if (dd->pport[pidx].port != port ||
- !dd->pport[pidx].link_speed_supported)
+ struct qib_pportdata *ppd = &dd->pport[pidx];
+
+ if (ppd->port != port || !ppd->link_speed_supported)
continue;
- dd->pport[pidx].cpspec->no_eep = val;
+ ppd->cpspec->no_eep = val;
/* now change the IBC and serdes, overriding generic */
- init_txdds_table(&dd->pport[pidx], 1);
+ init_txdds_table(ppd, 1);
any++;
}
if (*nxt == '\n')
@@ -5832,35 +5818,35 @@ static void set_no_qsfp_atten(struct qib_devdata *dd, int change)
* Change the IBC and serdes, but since it's
* general, don't override specific settings.
*/
- for (pidx = 0; pidx < dd->num_pports; ++pidx) {
- if (!dd->pport[pidx].link_speed_supported)
- continue;
- init_txdds_table(&dd->pport[pidx], 0);
- }
+ for (pidx = 0; pidx < dd->num_pports; ++pidx)
+ if (dd->pport[pidx].link_speed_supported)
+ init_txdds_table(&dd->pport[pidx], 0);
}
}
-/* handle the cable_atten parameter changing */
-static int setup_cable_atten(const char *str, struct kernel_param *kp)
+/* handle the txselect parameter changing */
+static int setup_txselect(const char *str, struct kernel_param *kp)
{
struct qib_devdata *dd;
unsigned long val;
char *n;
if (strlen(str) >= MAX_ATTEN_LEN) {
- printk(KERN_INFO QIB_DRV_NAME " cable_atten_values string "
+ printk(KERN_INFO QIB_DRV_NAME " txselect_values string "
"too long\n");
return -ENOSPC;
}
val = simple_strtoul(str, &n, 0);
- if (n == str || val >= TXDDS_TABLE_SZ) {
+ if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) {
printk(KERN_INFO QIB_DRV_NAME
- "cable_atten_values must start with a number\n");
+ "txselect_values must start with a number < %d\n",
+ TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ);
return -EINVAL;
}
- strcpy(cable_atten_list, str);
+ strcpy(txselect_list, str);
list_for_each_entry(dd, &qib_dev_list, list)
- set_no_qsfp_atten(dd, 1);
+ if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322)
+ set_no_qsfp_atten(dd, 1);
return 0;
}
@@ -6261,28 +6247,17 @@ static int qib_init_7322_variables(struct qib_devdata *dd)
* in adapter-specific routines.
*/
if (!(ppd->dd->flags & QIB_HAS_QSFP)) {
- int i;
- const struct txdds_ent *txdds;
-
if (!IS_QMH(ppd->dd) && !IS_QME(ppd->dd))
qib_devinfo(ppd->dd->pcidev, "IB%u:%u: "
"Unknown mezzanine card type\n",
- ppd->dd->unit, ppd->port);
- txdds = IS_QMH(ppd->dd) ? &qmh_qdr_txdds :
- &qme_qdr_txdds;
-
+ dd->unit, ppd->port);
+ cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME;
/*
- * set values in case link comes up
- * before table is written to driver.
+ * Choose center value as default tx serdes setting
+ * until changed through module parameter.
*/
- cp->h1_val = IS_QMH(ppd->dd) ? H1_FORCE_QMH :
- H1_FORCE_QME;
- for (i = 0; i < SERDES_CHANS; i++) {
- cp->amp[i] = txdds->amp;
- cp->pre[i] = txdds->pre;
- cp->mainv[i] = txdds->main;
- cp->post[i] = txdds->post;
- }
+ ppd->cpspec->no_eep = IS_QMH(dd) ?
+ TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4;
} else
cp->h1_val = H1_FORCE_VAL;
@@ -6299,8 +6274,7 @@ static int qib_init_7322_variables(struct qib_devdata *dd)
dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE;
dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE;
- dd->rhf_offset =
- dd->rcvhdrentsize - sizeof(u64) / sizeof(u32);
+ dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32);
/* we always allocate at least 2048 bytes for eager buffers */
dd->rcvegrbufsize = max(mtu, 2048);
@@ -7111,8 +7085,8 @@ static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = {
static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = {
/* amp, pre, main, post */
{ 2, 2, 15, 6 }, /* Loopback */
- { 0, 1, 0, 7 }, /* 2 dB */
- { 0, 1, 0, 9 }, /* 3 dB */
+ { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */
+ { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */
{ 0, 1, 0, 11 }, /* 4 dB */
{ 0, 1, 0, 13 }, /* 5 dB */
{ 0, 1, 0, 15 }, /* 6 dB */
@@ -7128,6 +7102,57 @@ static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = {
{ 0, 2, 9, 15 }, /* 16 dB */
};
+/*
+ * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ.
+ * These are mostly used for mez cards going through connectors
+ * and backplane traces, but can be used to add other "unusual"
+ * table values as well.
+ */
+static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = {
+ /* amp, pre, main, post */
+ { 0, 0, 0, 1 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 1 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 2 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 2 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 11 }, /* QME7342 backplane settings */
+};
+
+static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = {
+ /* amp, pre, main, post */
+ { 0, 0, 0, 7 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 7 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 8 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 8 }, /* QMH7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+ { 0, 0, 0, 13 }, /* QME7342 backplane settings */
+};
+
+static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = {
+ /* amp, pre, main, post */
+ { 0, 1, 0, 4 }, /* QMH7342 backplane settings */
+ { 0, 1, 0, 5 }, /* QMH7342 backplane settings */
+ { 0, 1, 0, 6 }, /* QMH7342 backplane settings */
+ { 0, 1, 0, 8 }, /* QMH7342 backplane settings */
+ { 0, 1, 12, 10 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 11 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 12 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 14 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 6 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 7 }, /* QME7342 backplane setting */
+ { 0, 1, 12, 8 }, /* QME7342 backplane setting */
+};
+
static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds,
unsigned atten)
{
@@ -7145,7 +7170,7 @@ static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds,
}
/*
- * if override is set, the module parameter cable_atten has a value
+ * if override is set, the module parameter txselect has a value
* for this specific port, so use it, rather than our normal mechanism.
*/
static void find_best_ent(struct qib_pportdata *ppd,
@@ -7184,15 +7209,28 @@ static void find_best_ent(struct qib_pportdata *ppd,
*ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]);
*qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]);
return;
- } else {
+ } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) {
/*
* If we have no (or incomplete) data from the cable
- * EEPROM, or no QSFP, use the module parameter value
- * to index into the attentuation table.
+ * EEPROM, or no QSFP, or override is set, use the
+ * module parameter value to index into the attentuation
+ * table.
*/
- *sdr_dds = &txdds_sdr[ppd->cpspec->no_eep];
- *ddr_dds = &txdds_ddr[ppd->cpspec->no_eep];
- *qdr_dds = &txdds_qdr[ppd->cpspec->no_eep];
+ idx = ppd->cpspec->no_eep;
+ *sdr_dds = &txdds_sdr[idx];
+ *ddr_dds = &txdds_ddr[idx];
+ *qdr_dds = &txdds_qdr[idx];
+ } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) {
+ /* similar to above, but index into the "extra" table. */
+ idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ;
+ *sdr_dds = &txdds_extra_sdr[idx];
+ *ddr_dds = &txdds_extra_ddr[idx];
+ *qdr_dds = &txdds_extra_qdr[idx];
+ } else {
+ /* this shouldn't happen, it's range checked */
+ *sdr_dds = txdds_sdr + qib_long_atten;
+ *ddr_dds = txdds_ddr + qib_long_atten;
+ *qdr_dds = txdds_qdr + qib_long_atten;
}
}
@@ -7203,33 +7241,24 @@ static void init_txdds_table(struct qib_pportdata *ppd, int override)
int idx;
int single_ent = 0;
- if (IS_QMH(ppd->dd)) {
- /* normally will be overridden, via setup_qmh() */
- sdr_dds = &qmh_sdr_txdds;
- ddr_dds = &qmh_ddr_txdds;
- qdr_dds = &qmh_qdr_txdds;
- single_ent = 1;
- } else if (IS_QME(ppd->dd)) {
- sdr_dds = &qme_sdr_txdds;
- ddr_dds = &qme_ddr_txdds;
- qdr_dds = &qme_qdr_txdds;
+ find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override);
+
+ /* for mez cards or override, use the selected value for all entries */
+ if (!(ppd->dd->flags & QIB_HAS_QSFP) || override)
single_ent = 1;
- } else
- find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override);
/* Fill in the first entry with the best entry found. */
set_txdds(ppd, 0, sdr_dds);
set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds);
set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds);
-
- /*
- * for our current speed, also write that value into the
- * tx serdes registers.
- */
- dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ?
- qdr_dds : (ppd->link_speed_active ==
- QIB_IB_DDR ? ddr_dds : sdr_dds));
- write_tx_serdes_param(ppd, dds);
+ if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED |
+ QIBL_LINKACTIVE)) {
+ dds = (struct txdds_ent *)(ppd->link_speed_active ==
+ QIB_IB_QDR ? qdr_dds :
+ (ppd->link_speed_active ==
+ QIB_IB_DDR ? ddr_dds : sdr_dds));
+ write_tx_serdes_param(ppd, dds);
+ }
/* Fill in the remaining entries with the default table values. */
for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) {
@@ -7352,6 +7381,11 @@ static int serdes_7322_init(struct qib_pportdata *ppd)
*/
init_txdds_table(ppd, 0);
+ /* ensure no tx overrides from earlier driver loads */
+ qib_write_kreg_port(ppd, krp_tx_deemph_override,
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ reset_tx_deemphasis_override));
+
/* Patch some SerDes defaults to "Better for IB" */
/* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */
ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9));
@@ -7421,7 +7455,7 @@ static int serdes_7322_init(struct qib_pportdata *ppd)
QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN);
ppd->cpspec->qdr_dfe_on = 1;
- /* (FLoop LOS gate: PPM filter enabled */
+ /* FLoop LOS gate: PPM filter enabled */
ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10);
/* rx offset center enabled */
@@ -7486,68 +7520,39 @@ static void write_tx_serdes_param(struct qib_pportdata *ppd,
SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) |
SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) |
SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena));
- deemph |= 1ULL << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- tx_override_deemphasis_select);
- deemph |= txdds->amp << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txampcntl_d2a);
- deemph |= txdds->main << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txc0_ena);
- deemph |= txdds->post << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txcp1_ena);
- deemph |= txdds->pre << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+
+ deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ tx_override_deemphasis_select);
+ deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txampcntl_d2a);
+ deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txc0_ena);
+ deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txcp1_ena);
+ deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
txcn1_ena);
qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph);
}
/*
- * set per-bay, per channel parameters. For now, we ignore
- * do_tx, and always set tx parameters, and set them with the same value
- * for all channels, using the channel 0 value. We may switch to
- * per-channel settings in the future, and that method only needs
- * to be done once.
- * Because this also writes the IBC txdds table with a single set
- * of values, it should be called only for cases where we want to completely
- * force a specific setting, typically only for mez cards.
+ * Set the parameters for mez cards on link bounce, so they are
+ * always exactly what was requested. Similar logic to init_txdds
+ * but does just the serdes.
*/
static void adj_tx_serdes(struct qib_pportdata *ppd)
{
- struct txdds_ent txdds;
- int i;
- u8 *amp, *pre, *mainv, *post;
-
- /*
- * Because we use TX_DEEMPHASIS_OVERRIDE, we need to
- * always do tx side, just like H1, since it is cleared
- * by link down
- */
- amp = ppd->cpspec->amp;
- pre = ppd->cpspec->pre;
- mainv = ppd->cpspec->mainv;
- post = ppd->cpspec->post;
-
- amp[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txampcntl_d2a);
- mainv[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txc0_ena);
- post[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txcp1_ena);
- pre[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
- txcn1_ena);
-
- /*
- * Use the channel zero values, only, for now, for
- * all channels
- */
- txdds.amp = amp[0];
- txdds.pre = pre[0];
- txdds.main = mainv[0];
- txdds.post = post[0];
-
- /* write the QDR table for IBC use, as backup for link down */
- for (i = 0; i < ARRAY_SIZE(txdds_qdr); ++i)
- set_txdds(ppd, i + 32, &txdds);
+ const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds;
+ struct txdds_ent *dds;
- write_tx_serdes_param(ppd, &txdds);
+ find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1);
+ dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ?
+ qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ?
+ ddr_dds : sdr_dds));
+ write_tx_serdes_param(ppd, dds);
}
/* set QDR forced value for H1, if needed */
@@ -7567,235 +7572,6 @@ static void force_h1(struct qib_pportdata *ppd)
}
}
-/*
- * Parse the parameters for the QMH7342, to get rx and tx serdes
- * settings for that Bay, for both possible mez connectors (PCIe bus)
- * and IB link (one link on mez1, two possible on mez2).
- *
- * Data is comma or white space separated.
- *
- * A set of data has 7 groups, rx and tx groups have SERDES_CHANS values,
- * one per IB lane (serdes channel).
- * The groups are Bay, bus# H1 rcv, and amp, pre, post, main Tx values (QDR).
- * The Bay # is used only for debugging currently.
- * H1 values are set whenever the link goes down, or is at cfg_test or
- * cfg_wait_enh. Tx values are programmed once, when this routine is called
- * (and with default values at chip initialization). Values are any base, in
- * strtoul style, and values are seperated by comma, or any white space
- * (space, tab, newline).
- *
- * An example set might look like this (white space vs
- * comma used for human ease of reading)
- * The ordering is a set of Bay# Bus# H1, amp, pre, post, and main for mez1 IB1,
- * repeat for mez2 IB1, then mez2 IB2.
- *
- * B B H1:0 amp:0 pre:0 post: 0 main:0
- * a u H1: 1 amp: 1 pre: 1 post: 1 main: 1
- * y s H1: 2 amp: 2 pre: 2 post: 2 main: 2
- * H1: 4 amp: 3 pre: 3 post: 3 main: 3
- * 1 3 8,6,5,6 0,0,0,0 1,1,1,1 10,10,10,10 3,3,3,3
- * 1 6 7,6,6,7 0,0,0,0 1,1,1,1 10,10,10,10 3,3,3,3
- * 1 6 9,7,7,8 0,0,0,0 1,1,1,1 10,10,10,10 3,3,3,3
- */
-#define N_QMH_FIELDS 22
-static int setup_qmh_params(const char *str, struct kernel_param *kp)
-{
- char *abuf, *v, *nv, *nvp;
- struct qib_devdata *dd;
- struct qib_pportdata *ppd;
- u32 mez, vlen, nf, port, bay;
- int ret = 0, found = 0;
-
- vlen = strlen(str) + 1;
- abuf = kmalloc(vlen, GFP_KERNEL);
- if (!abuf) {
- printk(KERN_INFO QIB_DRV_NAME
- " Unable to allocate QMH param buffer; ignoring\n");
- return 0;
- }
- memcpy(abuf, str, vlen);
- v = abuf;
-
- /* these 3 are because gcc can't know they are set before used */
- port = 1;
- mez = 1; /* used only for debugging */
- bay = 0; /* used only for debugging */
- ppd = NULL;
- for (nf = 0; (nv = strsep(&v, ", \t\n\r")) &&
- nf < (N_QMH_FIELDS * 3);) {
- u32 val;
-
- if (!*nv)
- /* allow for multiple separators */
- continue;
-
- val = simple_strtoul(nv, &nvp, 0);
- if (nv == nvp) {
- printk(KERN_INFO QIB_DRV_NAME
- " Bay%u, mez%u IB%u non-numeric value (%s) "
- "field #%u, ignoring rest\n", bay, mez,
- port, nv, nf % (N_QMH_FIELDS * 3));
- ret = -EINVAL;
- goto bail;
- }
- if (!(nf % N_QMH_FIELDS)) {
- ppd = NULL;
- bay = val;
- if (!bay || bay > 16) {
- printk(KERN_INFO QIB_DRV_NAME
- " Invalid bay # %u, field %u, "
- "ignoring rest\n", bay, nf);
- ret = -EINVAL;
- goto bail;
- }
- } else if ((nf % N_QMH_FIELDS) == 1) {
- u32 bus = val;
- if (nf == 1) {
- mez = 1;
- port = 1;
- } else if (nf == (N_QMH_FIELDS + 1)) {
- mez = 2;
- port = 1;
- } else {
- mez = 2;
- port = 2;
- }
- list_for_each_entry(dd, &qib_dev_list, list) {
- if (dd->deviceid != PCI_DEVICE_ID_QLOGIC_IB_7322
- || !IS_QMH(dd))
- continue; /* only for QMH cards */
- if (dd->pcidev->bus->number == bus) {
- found++;
- ppd = &dd->pport[port - 1];
- }
- }
- } else if (ppd) {
- u32 parm = (nf % N_QMH_FIELDS) - 2;
- if (parm < SERDES_CHANS && !(parm % SERDES_CHANS))
- ppd->cpspec->h1_val = val;
- else if (parm < (2 * SERDES_CHANS))
- ppd->cpspec->amp[parm % SERDES_CHANS] = val;
- else if (parm < (3 * SERDES_CHANS))
- ppd->cpspec->pre[parm % SERDES_CHANS] = val;
- else if (parm < (4 * SERDES_CHANS))
- ppd->cpspec->post[parm % SERDES_CHANS] = val;
- else {
- ppd->cpspec->mainv[parm % SERDES_CHANS] = val;
- /* At the end of a port, set params */
- if (parm == ((5 * SERDES_CHANS) - 1))
- adj_tx_serdes(ppd);
- }
- }
- nf++;
- }
- if (!found) {
- printk(KERN_ERR QIB_DRV_NAME
- ": No match found for qmh_serdes_setup parameter\n");
- ret = -EINVAL;
- }
-bail:
- kfree(abuf);
- return ret;
-}
-
-/*
- * Similarly for QME7342, but the format is simpler, values are the
- * same for all mez card positions in a blade (2 or 4 per blade), but
- * are different for some blades vs others, and we don't need to
- * specify different parameters for different serdes channels or different
- * IB ports.
- * Format is: h1 amp,pre,post,main
- * Alternate format (so ports can be different): Pport# h1 amp,pre,post,main
- */
-#define N_QME_FIELDS 5
-static int setup_qme_params(const char *str, struct kernel_param *kp)
-{
- char *abuf, *v, *nv, *nvp;
- struct qib_devdata *dd;
- u32 vlen, nf, port = 0;
- u8 h1, tx[4]; /* amp, pre, post, main */
- int ret = -EINVAL;
- char *seplist;
-
- vlen = strlen(str) + 1;
- abuf = kmalloc(vlen, GFP_KERNEL);
- if (!abuf) {
- printk(KERN_INFO QIB_DRV_NAME
- " Unable to allocate QME param buffer; ignoring\n");
- return 0;
- }
- strncpy(abuf, str, vlen);
-
- v = abuf;
- seplist = " \t";
- h1 = H1_FORCE_QME; /* gcc can't figure out always set before used */
-
- for (nf = 0; (nv = strsep(&v, seplist)); ) {
- u32 val;
-
- if (!*nv)
- /* allow for multiple separators */
- continue;
-
- if (!nf && *nv == 'P') {
- /* alternate format with port */
- val = simple_strtoul(++nv, &nvp, 0);
- if (nv == nvp || port >= NUM_IB_PORTS) {
- printk(KERN_INFO QIB_DRV_NAME
- " %s: non-numeric port value (%s) "
- "ignoring rest\n", __func__, nv);
- goto done;
- }
- port = val;
- continue; /* without incrementing nf */
- }
- val = simple_strtoul(nv, &nvp, 0);
- if (nv == nvp) {
- printk(KERN_INFO QIB_DRV_NAME
- " %s: non-numeric value (%s) "
- "field #%u, ignoring rest\n", __func__,
- nv, nf);
- goto done;
- }
- if (!nf) {
- h1 = val;
- seplist = ",";
- } else
- tx[nf - 1] = val;
- if (++nf == N_QME_FIELDS) {
- list_for_each_entry(dd, &qib_dev_list, list) {
- int pidx, i;
- if (dd->deviceid != PCI_DEVICE_ID_QLOGIC_IB_7322
- || !IS_QME(dd))
- continue; /* only for QME cards */
- for (pidx = 0; pidx < dd->num_pports; ++pidx) {
- struct qib_pportdata *ppd;
- ppd = &dd->pport[pidx];
- if ((port && ppd->port != port) ||
- !ppd->link_speed_supported)
- continue;
- ppd->cpspec->h1_val = h1;
- for (i = 0; i < SERDES_CHANS; i++) {
- ppd->cpspec->amp[i] = tx[0];
- ppd->cpspec->pre[i] = tx[1];
- ppd->cpspec->post[i] = tx[2];
- ppd->cpspec->mainv[i] = tx[3];
- }
- adj_tx_serdes(ppd);
- }
- }
- ret = 0;
- goto done;
- }
- }
- printk(KERN_INFO QIB_DRV_NAME
- " %s: Only %u of %u fields provided, skipping\n",
- __func__, nf, N_QME_FIELDS);
-done:
- kfree(abuf);
- return ret;
-}
-
#define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN)
#define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en)
View Lorry Controller Status