summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qualcomm/emac/emac-mac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/qualcomm/emac/emac-mac.c')
-rw-r--r--drivers/net/ethernet/qualcomm/emac/emac-mac.c23
1 files changed, 17 insertions, 6 deletions
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
index e97968ed4b8f..0b4deb31e742 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
@@ -575,10 +575,11 @@ void emac_mac_start(struct emac_adapter *adpt)
mac |= TXEN | RXEN; /* enable RX/TX */
- /* We don't have ethtool support yet, so force flow-control mode
- * to 'full' always.
- */
- mac |= TXFC | RXFC;
+ /* Configure MAC flow control to match the PHY's settings. */
+ if (phydev->pause)
+ mac |= RXFC;
+ if (phydev->pause != phydev->asym_pause)
+ mac |= TXFC;
/* setup link speed */
mac &= ~SPEED_MASK;
@@ -1003,6 +1004,12 @@ int emac_mac_up(struct emac_adapter *adpt)
writel((u32)~DIS_INT, adpt->base + EMAC_INT_STATUS);
writel(adpt->irq.mask, adpt->base + EMAC_INT_MASK);
+ /* Enable pause frames. Without this feature, the EMAC has been shown
+ * to receive (and drop) frames with FCS errors at gigabit connections.
+ */
+ adpt->phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+ adpt->phydev->advertising |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+
adpt->phydev->irq = PHY_IGNORE_INTERRUPT;
phy_start(adpt->phydev);
@@ -1021,14 +1028,18 @@ void emac_mac_down(struct emac_adapter *adpt)
napi_disable(&adpt->rx_q.napi);
phy_stop(adpt->phydev);
- phy_disconnect(adpt->phydev);
- /* disable mac irq */
+ /* Interrupts must be disabled before the PHY is disconnected, to
+ * avoid a race condition where adjust_link is null when we get
+ * an interrupt.
+ */
writel(DIS_INT, adpt->base + EMAC_INT_STATUS);
writel(0, adpt->base + EMAC_INT_MASK);
synchronize_irq(adpt->irq.irq);
free_irq(adpt->irq.irq, &adpt->irq);
+ phy_disconnect(adpt->phydev);
+
emac_mac_reset(adpt);
emac_tx_q_descs_free(adpt);