summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/core/devices.c2
-rw-r--r--drivers/usb/core/hcd.c18
-rw-r--r--drivers/usb/core/hub.c18
-rw-r--r--drivers/usb/core/message.c8
-rw-r--r--drivers/usb/core/sysfs.c6
-rw-r--r--drivers/usb/host/ehci-hcd.c5
-rw-r--r--drivers/usb/host/ehci-hub.c20
-rw-r--r--drivers/usb/host/ehci-q.c11
-rw-r--r--drivers/usb/host/fhci-hcd.c3
-rw-r--r--drivers/usb/host/isp1362-hcd.c25
-rw-r--r--drivers/usb/host/isp1760-hcd.c6
-rw-r--r--drivers/usb/host/r8a66597-hcd.c17
-rw-r--r--drivers/usb/host/uhci-hcd.c15
-rw-r--r--drivers/usb/host/uhci-hub.c2
-rw-r--r--drivers/usb/serial/generic.c10
-rw-r--r--drivers/usb/storage/unusual_devs.h7
-rw-r--r--drivers/usb/storage/usb.c3
17 files changed, 127 insertions, 49 deletions
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 96f11715cd26..355dffcc23b0 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -494,7 +494,7 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
return 0;
/* allocate 2^1 pages = 8K (on i386);
* should be more than enough for one device */
- pages_start = (char *)__get_free_pages(GFP_KERNEL, 1);
+ pages_start = (char *)__get_free_pages(GFP_NOIO, 1);
if (!pages_start)
return -ENOMEM;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 0495fa651225..80995ef0868c 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1684,6 +1684,24 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev,
}
}
if (cur_alt && new_alt) {
+ struct usb_interface *iface = usb_ifnum_to_if(udev,
+ cur_alt->desc.bInterfaceNumber);
+
+ if (iface->resetting_device) {
+ /*
+ * The USB core just reset the device, so the xHCI host
+ * and the device will think alt setting 0 is installed.
+ * However, the USB core will pass in the alternate
+ * setting installed before the reset as cur_alt. Dig
+ * out the alternate setting 0 structure, or the first
+ * alternate setting if a broken device doesn't have alt
+ * setting 0.
+ */
+ cur_alt = usb_altnum_to_altsetting(iface, 0);
+ if (!cur_alt)
+ cur_alt = &iface->altsetting[0];
+ }
+
/* Drop all the endpoints in the current alt setting */
for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
ret = hcd->driver->drop_endpoint(hcd, udev,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0cec6caf6e9b..35cc8b9ba1f5 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3347,6 +3347,9 @@ static void hub_events(void)
USB_PORT_FEAT_C_SUSPEND);
udev = hdev->children[i-1];
if (udev) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+
usb_lock_device(udev);
ret = remote_wakeup(hdev->
children[i-1]);
@@ -3692,19 +3695,14 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
usb_enable_interface(udev, intf, true);
ret = 0;
} else {
- /* We've just reset the device, so it will think alt
- * setting 0 is installed. For usb_set_interface() to
- * work properly, we need to set the current alternate
- * interface setting to 0 (or the first alt setting, if
- * the device doesn't have alt setting 0).
+ /* Let the bandwidth allocation function know that this
+ * device has been reset, and it will have to use
+ * alternate setting 0 as the current alternate setting.
*/
- intf->cur_altsetting =
- usb_find_alt_setting(config, i, 0);
- if (!intf->cur_altsetting)
- intf->cur_altsetting =
- &config->intf_cache[i]->altsetting[0];
+ intf->resetting_device = 1;
ret = usb_set_interface(udev, desc->bInterfaceNumber,
desc->bAlternateSetting);
+ intf->resetting_device = 0;
}
if (ret < 0) {
dev_err(&udev->dev, "failed to restore interface %d "
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 1b994846e8e0..9bc95fec793f 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -906,11 +906,11 @@ char *usb_cache_string(struct usb_device *udev, int index)
if (index <= 0)
return NULL;
- buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL);
+ buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO);
if (buf) {
len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
if (len > 0) {
- smallbuf = kmalloc(++len, GFP_KERNEL);
+ smallbuf = kmalloc(++len, GFP_NOIO);
if (!smallbuf)
return buf;
memcpy(smallbuf, buf, len);
@@ -1731,7 +1731,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
if (cp) {
nintf = cp->desc.bNumInterfaces;
new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
- GFP_KERNEL);
+ GFP_NOIO);
if (!new_interfaces) {
dev_err(&dev->dev, "Out of memory\n");
return -ENOMEM;
@@ -1740,7 +1740,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
for (; n < nintf; ++n) {
new_interfaces[n] = kzalloc(
sizeof(struct usb_interface),
- GFP_KERNEL);
+ GFP_NOIO);
if (!new_interfaces[n]) {
dev_err(&dev->dev, "Out of memory\n");
ret = -ENOMEM;
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 485edf937f25..5f3908f6e2dc 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -115,6 +115,12 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf)
case USB_SPEED_HIGH:
speed = "480";
break;
+ case USB_SPEED_VARIABLE:
+ speed = "480";
+ break;
+ case USB_SPEED_SUPER:
+ speed = "5000";
+ break;
default:
speed = "unknown";
}
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5859522d6edd..1ec3857f22e6 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -787,9 +787,10 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
/* start 20 msec resume signaling from this port,
* and make khubd collect PORT_STAT_C_SUSPEND to
- * stop that signaling.
+ * stop that signaling. Use 5 ms extra for safety,
+ * like usb_port_resume() does.
*/
- ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
+ ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 2c6571c05f35..c75d9270c752 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -120,9 +120,26 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
del_timer_sync(&ehci->watchdog);
del_timer_sync(&ehci->iaa_watchdog);
- port = HCS_N_PORTS (ehci->hcs_params);
spin_lock_irq (&ehci->lock);
+ /* Once the controller is stopped, port resumes that are already
+ * in progress won't complete. Hence if remote wakeup is enabled
+ * for the root hub and any ports are in the middle of a resume or
+ * remote wakeup, we must fail the suspend.
+ */
+ if (hcd->self.root_hub->do_remote_wakeup) {
+ port = HCS_N_PORTS(ehci->hcs_params);
+ while (port--) {
+ if (ehci->reset_done[port] != 0) {
+ spin_unlock_irq(&ehci->lock);
+ ehci_dbg(ehci, "suspend failed because "
+ "port %d is resuming\n",
+ port + 1);
+ return -EBUSY;
+ }
+ }
+ }
+
/* stop schedules, clean any completed work */
if (HC_IS_RUNNING(hcd->state)) {
ehci_quiesce (ehci);
@@ -138,6 +155,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
*/
ehci->bus_suspended = 0;
ehci->owned_ports = 0;
+ port = HCS_N_PORTS(ehci->hcs_params);
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index a427d3b00634..89521775c567 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -849,9 +849,10 @@ qh_make (
* But interval 1 scheduling is simpler, and
* includes high bandwidth.
*/
- dbg ("intr period %d uframes, NYET!",
- urb->interval);
- goto done;
+ urb->interval = 1;
+ } else if (qh->period > ehci->periodic_size) {
+ qh->period = ehci->periodic_size;
+ urb->interval = qh->period << 3;
}
} else {
int think_time;
@@ -874,6 +875,10 @@ qh_make (
usb_calc_bus_time (urb->dev->speed,
is_input, 0, max_packet (maxp)));
qh->period = urb->interval;
+ if (qh->period > ehci->periodic_size) {
+ qh->period = ehci->periodic_size;
+ urb->interval = qh->period;
+ }
}
}
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 0951818ef93b..78e7c3cfcb72 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -242,9 +242,10 @@ err:
static void fhci_usb_free(void *lld)
{
struct fhci_usb *usb = lld;
- struct fhci_hcd *fhci = usb->fhci;
+ struct fhci_hcd *fhci;
if (usb) {
+ fhci = usb->fhci;
fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
fhci_ep0_free(usb);
kfree(usb->actual_frame);
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 73352f3739b5..42971657fde2 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2270,10 +2270,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd)
dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
dev_info(hcd->self.controller, " ISTL: 2 * %4d: %4d @ $%04x:$%04x\n",
istl_size / 2, istl_size, 0, istl_size / 2);
- dev_info(hcd->self.controller, " INTL: %4d * (%3lu+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " INTL: %4d * (%3zu+8): %4d @ $%04x\n",
ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
intl_size, istl_size);
- dev_info(hcd->self.controller, " ATL : %4d * (%3lu+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " ATL : %4d * (%3zu+8): %4d @ $%04x\n",
atl_buffers, atl_blksize - PTD_HEADER_SIZE,
atl_size, istl_size + intl_size);
dev_info(hcd->self.controller, " USED/FREE: %4d %4d\n", total,
@@ -2697,6 +2697,8 @@ static int __init isp1362_probe(struct platform_device *pdev)
void __iomem *data_reg;
int irq;
int retval = 0;
+ struct resource *irq_res;
+ unsigned int irq_flags = 0;
/* basic sanity checks first. board-specific init logic should
* have initialized this the three resources and probably board
@@ -2710,11 +2712,12 @@ static int __init isp1362_probe(struct platform_device *pdev)
data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- irq = platform_get_irq(pdev, 0);
- if (!addr || !data || irq < 0) {
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!addr || !data || !irq_res) {
retval = -ENODEV;
goto err1;
}
+ irq = irq_res->start;
#ifdef CONFIG_USB_HCD_DMA
if (pdev->dev.dma_mask) {
@@ -2781,12 +2784,16 @@ static int __init isp1362_probe(struct platform_device *pdev)
}
#endif
-#ifdef CONFIG_ARM
- if (isp1362_hcd->board)
- set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING);
-#endif
+ if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+ irq_flags |= IRQF_TRIGGER_RISING;
+ if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+ irq_flags |= IRQF_TRIGGER_FALLING;
+ if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+ irq_flags |= IRQF_TRIGGER_HIGH;
+ if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+ irq_flags |= IRQF_TRIGGER_LOW;
- retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED);
+ retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err6;
pr_info("%s, irq %d\n", hcd->product_desc, irq);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 9600a58299db..27b8f7cb4471 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1039,12 +1039,12 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
u32 buffstatus;
- /* XXX
+ /*
* NAKs are handled in HW by the chip. Usually if the
* device is not able to send data fast enough.
- * This did not trigger for a long time now.
+ * This happens mostly on slower hardware.
*/
- printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+ printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
"%d of %zu done: %08x cur: %08x\n", qtd,
urb, qh, PTD_XFERRED_LENGTH(dw3),
qtd->length, done_map,
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index b7a661c02bcd..0ceec123ddfd 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -216,8 +216,17 @@ static void disable_controller(struct r8a66597 *r8a66597)
{
int port;
+ /* disable interrupts */
r8a66597_write(r8a66597, 0, INTENB0);
- r8a66597_write(r8a66597, 0, INTSTS0);
+ r8a66597_write(r8a66597, 0, INTENB1);
+ r8a66597_write(r8a66597, 0, BRDYENB);
+ r8a66597_write(r8a66597, 0, BEMPENB);
+ r8a66597_write(r8a66597, 0, NRDYENB);
+
+ /* clear status */
+ r8a66597_write(r8a66597, 0, BRDYSTS);
+ r8a66597_write(r8a66597, 0, NRDYSTS);
+ r8a66597_write(r8a66597, 0, BEMPSTS);
for (port = 0; port < r8a66597->max_root_hub; port++)
r8a66597_disable_port(r8a66597, port);
@@ -2466,6 +2475,12 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
r8a66597->rh_timer.data = (unsigned long)r8a66597;
r8a66597->reg = (unsigned long)reg;
+ /* make sure no interrupts are pending */
+ ret = r8a66597_clock_enable(r8a66597);
+ if (ret < 0)
+ goto clean_up3;
+ disable_controller(r8a66597);
+
for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
INIT_LIST_HEAD(&r8a66597->pipe_queue[i]);
init_timer(&r8a66597->td_timer[i]);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 5cd0e48f67fb..99cd00fd3514 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -749,7 +749,20 @@ static int uhci_rh_suspend(struct usb_hcd *hcd)
spin_lock_irq(&uhci->lock);
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
rc = -ESHUTDOWN;
- else if (!uhci->dead)
+ else if (uhci->dead)
+ ; /* Dead controllers tell no tales */
+
+ /* Once the controller is stopped, port resumes that are already
+ * in progress won't complete. Hence if remote wakeup is enabled
+ * for the root hub and any ports are in the middle of a resume or
+ * remote wakeup, we must fail the suspend.
+ */
+ else if (hcd->self.root_hub->do_remote_wakeup &&
+ uhci->resuming_ports) {
+ dev_dbg(uhci_dev(uhci), "suspend failed because a port "
+ "is resuming\n");
+ rc = -EBUSY;
+ } else
suspend_rh(uhci, UHCI_RH_SUSPENDED);
spin_unlock_irq(&uhci->lock);
return rc;
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 885b585360b9..8270055848ca 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -167,7 +167,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
/* Port received a wakeup request */
set_bit(port, &uhci->resuming_ports);
uhci->ports_timeout = jiffies +
- msecs_to_jiffies(20);
+ msecs_to_jiffies(25);
/* Make sure we see the port again
* after the resuming period is over. */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index f1ea3a33b6e6..83443d6306d6 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -386,12 +386,12 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
dbg("%s - port %d", __func__, port->number);
- if (serial->type->max_in_flight_urbs) {
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ if (serial->type->max_in_flight_urbs)
chars = port->tx_bytes_flight;
- spin_unlock_irqrestore(&port->lock, flags);
- } else if (serial->num_bulk_out)
+ else if (serial->num_bulk_out)
chars = kfifo_len(&port->write_fifo);
+ spin_unlock_irqrestore(&port->lock, flags);
dbg("%s - returns %d", __func__, chars);
return chars;
@@ -489,6 +489,8 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
dbg("%s - port %d", __func__, port->number);
if (port->serial->type->max_in_flight_urbs) {
+ kfree(urb->transfer_buffer);
+
spin_lock_irqsave(&port->lock, flags);
--port->urbs_in_flight;
port->tx_bytes_flight -= urb->transfer_buffer_length;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 64a0a2c27e12..c932f9053188 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1807,13 +1807,6 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
-/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
-UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
- "INTOVA",
- "Pixtreme",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
* Mio Moov 330
*/
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 5a53d4f0dd11..e9f995486ec1 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -434,7 +434,8 @@ static void adjust_quirks(struct us_data *us)
u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor);
u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
unsigned f = 0;
- unsigned int mask = (US_FL_SANE_SENSE | US_FL_FIX_CAPACITY |
+ unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
+ US_FL_FIX_CAPACITY |
US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
View Lorry Controller Status