blob: 10a2f15b08a38305e1508c6b04cf600e71f91190 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
|
* Hisilicon K3 DMA controller
See dma.txt first
Required properties:
- compatible: Must be one of
- "hisilicon,k3-dma-1.0"
- "hisilicon,hisi-pcm-asp-dma-1.0"
- reg: Should contain DMA registers location and length.
- interrupts: Should contain one interrupt shared by all channel
- #dma-cells: see dma.txt, should be 1, para number
- dma-channels: physical channels supported
- dma-requests: virtual channels supported, each virtual channel
have specific request line
- clocks: clock required
Example:
Controller:
dma0: dma@fcd02000 {
compatible = "hisilicon,k3-dma-1.0";
reg = <0xfcd02000 0x1000>;
#dma-cells = <1>;
dma-channels = <16>;
dma-requests = <27>;
interrupts = <0 12 4>;
clocks = <&pclk>;
};
Client:
Use specific request line passing from dmax
For example, i2c0 read channel request line is 18, while write channel use 19
i2c0: i2c@fcb08000 {
compatible = "snps,designware-i2c";
dmas = <&dma0 18 /* read channel */
&dma0 19>; /* write channel */
dma-names = "rx", "tx";
};
i2c1: i2c@fcb09000 {
compatible = "snps,designware-i2c";
dmas = <&dma0 20 /* read channel */
&dma0 21>; /* write channel */
dma-names = "rx", "tx";
};
|
