blob: c7e9b5fd50e74d0e0ce0bfe403cb5158a37717e9 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
* Spreadtrum DMA controller
This binding follows the generic DMA bindings defined in dma.txt.
Required properties:
- compatible: Should be "sprd,sc9860-dma".
- reg: Should contain DMA registers location and length.
- interrupts: Should contain one interrupt shared by all channel.
- #dma-cells: must be <1>. Used to represent the number of integer
cells in the dmas property of client device.
- dma-channels : Number of DMA channels supported. Should be 32.
- clock-names: Should contain the clock of the DMA controller.
- clocks: Should contain a clock specifier for each entry in clock-names.
Deprecated properties:
- #dma-channels : Number of DMA channels supported. Should be 32.
Example:
Controller:
apdma: dma-controller@20100000 {
compatible = "sprd,sc9860-dma";
reg = <0x20100000 0x4000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
dma-channels = <32>;
clock-names = "enable";
clocks = <&clk_ap_ahb_gates 5>;
};
Client:
DMA clients connected to the Spreadtrum DMA controller must use the format
described in the dma.txt file, using a two-cell specifier for each channel.
The two cells in order are:
1. A phandle pointing to the DMA controller.
2. The slave id.
spi0: spi@70a00000{
...
dma-names = "rx_chn", "tx_chn";
dmas = <&apdma 11>, <&apdma 12>;
...
};
|
