1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
* NXP Flex Serial Peripheral Interface (FSPI)
Required properties:
- compatible : Should be "nxp,lx2160a-fspi"
"nxp,imx8qxp-fspi"
"nxp,imx8mm-fspi"
"nxp,imx8mp-fspi"
"nxp,imx8dxl-fspi"
- reg : First contains the register location and length,
Second contains the memory mapping address and length
- reg-names : Should contain the resource reg names:
- fspi_base: configuration register address space
- fspi_mmap: memory mapped address space
- interrupts : Should contain the interrupt for the device
Required SPI slave node properties:
- reg : There are two buses (A and B) with two chip selects each.
This encodes to which bus and CS the flash is connected:
- <0>: Bus A, CS 0
- <1>: Bus A, CS 1
- <2>: Bus B, CS 0
- <3>: Bus B, CS 1
Example showing the usage of two SPI NOR slave devices on bus A:
fspi0: spi@20c0000 {
compatible = "nxp,lx2160a-fspi";
reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <0 25 0x4>; /* Level high type */
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "fspi_en", "fspi";
mt35xu512aba0: flash@0 {
reg = <0>;
....
};
mt35xu512aba1: flash@1 {
reg = <1>;
....
};
};
|
