Merge tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO changes from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.18 development cycle:

   - Increase the default ARCH_NR_GPIO from 256 to 512.  This was done
     to avoid having a custom <asm/gpio.h> header for the x86
     architecture - GPIO is custom and complicated enough as it is
     already! We want to move to a radix to store the descriptors going
     forward, and finally get rid of this fixed array size altogether.

   - Endgame patching of the gpio_remove() semantics initiated by
     Abdoulaye Berthe.  It is not accepted by the system that the
     removal of a GPIO chip fails during eg reboot or shutdown, and
     therefore the return value has now painfully been refactored away.
     For special cases like GPIO expanders on a hot-pluggable bus like
     USB, we may later add some gpiochip_try_remove() call, but for the
     cases we have now, return values are moot.

   - Some incremental refactoring of the gpiolib core and ACPI GPIO
     library for more descriptor usage.

   - Refactor the chained IRQ handler set-up method to handle also
     threaded, nested interrupts and set up the parent IRQ correctly.
     Switch STMPE and TC3589x drivers to use this registration method.

   - Add a .irq_not_threaded flag to the struct gpio_chip, so that also
     GPIO expanders that block but are still not using threaded IRQ
     handlers.

   - New drivers for the ARM64 X-Gene SoC GPIO controller.

   - The syscon GPIO driver has been improved to handle the "DSP GPIO"
     found on the TI Keystone 2 SoC:s.

   - ADNP driver switched to use gpiolib irqchip helpers.

   - Refactor the DWAPB driver to support being instantiated from and
     MFD cell (platform device).

   - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP,
     Xilinx and Crystalcove drivers.

   - Various minor fixes"

* tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits)
  gpio: pch: Build context save/restore only for PM
  pinctrl: abx500: get rid of unused variable
  gpio: ks8695: fix 'else should follow close brace '}''
  gpio: stmpe: add verbose debug code
  gpio: stmpe: fix up interrupt enable logic
  gpio: staticize xway_stp_init()
  gpio: handle also nested irqchips in the chained handler set-up
  gpio: set parent irq on chained handlers
  gpiolib: irqchip: use irq_find_mapping while removing irqchip
  gpio: crystalcove: support virtual GPIO
  pinctrl: bcm281xx: make Kconfig dependency more strict
  gpio: kona: enable only on BCM_MOBILE or for compile testing
  gpio, bcm-kona, LLVMLinux: Remove use of __initconst
  gpio: Fix ngpio in gpio-xilinx driver
  gpio: dwapb: fix pointer to integer cast
  gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard
  gpio: xgene: Remove unneeded forward declation for struct xgene_gpio
  gpio: xgene: Fix missing spin_lock_init()
  gpio: ks8695: fix switch case indentation
  gpiolib: add irq_not_threaded flag to gpio_chip
  ...

1 files changed, 39 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
new file mode 100644
index 000000000000..6c7e6c7302f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
@@ -0,0 +1,39 @@
+Keystone 2 DSP GPIO controller bindings
+
+HOST OS userland running on ARM can send interrupts to DSP cores using
+the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core.
+This is one of the component used by the IPC mechanism used on Keystone SOCs.
+
+For example TCI6638K2K SoC has 8 DSP GPIO controllers:
+ - 8 for C66x CorePacx CPUs 0-7
+
+Keystone 2 DSP GPIO controller has specific features:
+- each GPIO can be configured only as output pin;
+- setting GPIO value to 1 causes IRQ generation on target DSP core;
+- reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still
+  pending.
+
+Required Properties:
+- compatible: should be "ti,keystone-dsp-gpio"
+- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to
+  access device state control registers and the offset of device's specific
+  registers within device state control registers range.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be 2.
+
+Please refer to gpio.txt in this directory for details of the common GPIO
+bindings used by client devices.
+
+Example:
+	dspgpio0: keystone_dsp_gpio@02620240 {
+		compatible = "ti,keystone-dsp-gpio";
+		ti,syscon-dev = <&devctrl 0x240>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	dsp0: dsp0 {
+		compatible = "linux,rproc-user";
+		...
+		kick-gpio = <&dspgpio0 27>;
+	};