Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 12 insertions, 9 deletions

diff --git a/drivers/net/ethernet/dec/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c
index 48b0b6566eef..fc4001f6a5e4 100644
--- a/drivers/net/ethernet/dec/tulip/uli526x.c
+++ b/drivers/net/ethernet/dec/tulip/uli526x.c
@@ -232,8 +232,8 @@ static irqreturn_t uli526x_interrupt(int, void *);
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void uli526x_poll(struct net_device *dev);
 #endif
-static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
-static void allocate_rx_buffer(struct uli526x_board_info *);
+static void uli526x_descriptor_init(struct net_device *, unsigned long);
+static void allocate_rx_buffer(struct net_device *);
 static void update_cr6(u32, unsigned long);
 static void send_filter_frame(struct net_device *, int);
 static u16 phy_read(unsigned long, u8, u8, u32);
@@ -549,7 +549,7 @@ static void uli526x_init(struct net_device *dev)
 		db->op_mode = db->media_mode; 	/* Force Mode */
 
 	/* Initialize Transmit/Receive decriptor and CR3/4 */
-	uli526x_descriptor_init(db, ioaddr);
+	uli526x_descriptor_init(dev, ioaddr);
 
 	/* Init CR6 to program M526X operation */
 	update_cr6(db->cr6_data, ioaddr);
@@ -711,7 +711,7 @@ static irqreturn_t uli526x_interrupt(int irq, void *dev_id)
 
 	/* reallocate rx descriptor buffer */
 	if (db->rx_avail_cnt<RX_DESC_CNT)
-		allocate_rx_buffer(db);
+		allocate_rx_buffer(dev);
 
 	/* Free the transmitted descriptor */
 	if ( db->cr5_data & 0x01)
@@ -844,7 +844,7 @@ static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info
 				/* Good packet, send to upper layer */
 				/* Shorst packet used new SKB */
 				if ((rxlen < RX_COPY_SIZE) &&
-				    (((new_skb = dev_alloc_skb(rxlen + 2)) != NULL))) {
+				    (((new_skb = netdev_alloc_skb(dev, rxlen + 2)) != NULL))) {
 					skb = new_skb;
 					/* size less than COPY_SIZE, allocate a rxlen SKB */
 					skb_reserve(skb, 2); /* 16byte align */
@@ -1289,8 +1289,9 @@ static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * sk
  *	Using Chain structure, and allocate Tx/Rx buffer
  */
 
-static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr)
+static void uli526x_descriptor_init(struct net_device *dev, unsigned long ioaddr)
 {
+	struct uli526x_board_info *db = netdev_priv(dev);
 	struct tx_desc *tmp_tx;
 	struct rx_desc *tmp_rx;
 	unsigned char *tmp_buf;
@@ -1343,7 +1344,7 @@ static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long
 	tmp_rx->next_rx_desc = db->first_rx_desc;
 
 	/* pre-allocate Rx buffer */
-	allocate_rx_buffer(db);
+	allocate_rx_buffer(dev);
 }
 
 
@@ -1433,15 +1434,17 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt)
  *	As possible as allocate maxiumn Rx buffer
  */
 
-static void allocate_rx_buffer(struct uli526x_board_info *db)
+static void allocate_rx_buffer(struct net_device *dev)
 {
+	struct uli526x_board_info *db = netdev_priv(dev);
 	struct rx_desc *rxptr;
 	struct sk_buff *skb;
 
 	rxptr = db->rx_insert_ptr;
 
 	while(db->rx_avail_cnt < RX_DESC_CNT) {
-		if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
+		skb = netdev_alloc_skb(dev, RX_ALLOC_SIZE);
+		if (skb == NULL)
 			break;
 		rxptr->rx_skb_ptr = skb; /* FIXME (?) */
 		rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev,