Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 415 insertions, 0 deletions

diff --git a/drivers/net/ethernet/sfc/mcdi_mon.c b/drivers/net/ethernet/sfc/mcdi_mon.c
new file mode 100644
index 000000000000..fb7f65b59eb8
--- /dev/null
+++ b/drivers/net/ethernet/sfc/mcdi_mon.c
@@ -0,0 +1,415 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2011 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/hwmon.h>
+#include <linux/stat.h>
+
+#include "net_driver.h"
+#include "mcdi.h"
+#include "mcdi_pcol.h"
+#include "nic.h"
+
+enum efx_hwmon_type {
+	EFX_HWMON_UNKNOWN,
+	EFX_HWMON_TEMP,         /* temperature */
+	EFX_HWMON_COOL,         /* cooling device, probably a heatsink */
+	EFX_HWMON_IN            /* input voltage */
+};
+
+static const struct {
+	const char *label;
+	enum efx_hwmon_type hwmon_type;
+	int port;
+} efx_mcdi_sensor_type[MC_CMD_SENSOR_ENTRY_MAXNUM] = {
+#define SENSOR(name, label, hwmon_type, port)			\
+	[MC_CMD_SENSOR_##name] = { label, hwmon_type, port }
+	SENSOR(CONTROLLER_TEMP,	   "Controller temp.",	   EFX_HWMON_TEMP, -1),
+	SENSOR(PHY_COMMON_TEMP,	   "PHY temp.",		   EFX_HWMON_TEMP, -1),
+	SENSOR(CONTROLLER_COOLING, "Controller cooling",   EFX_HWMON_COOL, -1),
+	SENSOR(PHY0_TEMP,	   "PHY temp.",		   EFX_HWMON_TEMP, 0),
+	SENSOR(PHY0_COOLING,	   "PHY cooling",	   EFX_HWMON_COOL, 0),
+	SENSOR(PHY1_TEMP,	   "PHY temp.",		   EFX_HWMON_TEMP, 1),
+	SENSOR(PHY1_COOLING,	   "PHY cooling",	   EFX_HWMON_COOL, 1),
+	SENSOR(IN_1V0,		   "1.0V supply",	   EFX_HWMON_IN,   -1),
+	SENSOR(IN_1V2,		   "1.2V supply",	   EFX_HWMON_IN,   -1),
+	SENSOR(IN_1V8,		   "1.8V supply",	   EFX_HWMON_IN,   -1),
+	SENSOR(IN_2V5,		   "2.5V supply",	   EFX_HWMON_IN,   -1),
+	SENSOR(IN_3V3,		   "3.3V supply",	   EFX_HWMON_IN,   -1),
+	SENSOR(IN_12V0,		   "12.0V supply",	   EFX_HWMON_IN,   -1),
+	SENSOR(IN_1V2A,		   "1.2V analogue supply", EFX_HWMON_IN,   -1),
+	SENSOR(IN_VREF,		   "ref. voltage",	   EFX_HWMON_IN,   -1),
+#undef SENSOR
+};
+
+static const char *const sensor_status_names[] = {
+	[MC_CMD_SENSOR_STATE_OK] = "OK",
+	[MC_CMD_SENSOR_STATE_WARNING] = "Warning",
+	[MC_CMD_SENSOR_STATE_FATAL] = "Fatal",
+	[MC_CMD_SENSOR_STATE_BROKEN] = "Device failure",
+};
+
+void efx_mcdi_sensor_event(struct efx_nic *efx, efx_qword_t *ev)
+{
+	unsigned int type, state, value;
+	const char *name = NULL, *state_txt;
+
+	type = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_MONITOR);
+	state = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_STATE);
+	value = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_VALUE);
+
+	/* Deal gracefully with the board having more drivers than we
+	 * know about, but do not expect new sensor states. */
+	if (type < ARRAY_SIZE(efx_mcdi_sensor_type))
+		name = efx_mcdi_sensor_type[type].label;
+	if (!name)
+		name = "No sensor name available";
+	EFX_BUG_ON_PARANOID(state >= ARRAY_SIZE(sensor_status_names));
+	state_txt = sensor_status_names[state];
+
+	netif_err(efx, hw, efx->net_dev,
+		  "Sensor %d (%s) reports condition '%s' for raw value %d\n",
+		  type, name, state_txt, value);
+}
+
+#ifdef CONFIG_SFC_MCDI_MON
+
+struct efx_mcdi_mon_attribute {
+	struct device_attribute dev_attr;
+	unsigned int index;
+	unsigned int type;
+	unsigned int limit_value;
+	char name[12];
+};
+
+static int efx_mcdi_mon_update(struct efx_nic *efx)
+{
+	struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
+	u8 inbuf[MC_CMD_READ_SENSORS_IN_LEN];
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, READ_SENSORS_IN_DMA_ADDR_LO,
+		       hwmon->dma_buf.dma_addr & 0xffffffff);
+	MCDI_SET_DWORD(inbuf, READ_SENSORS_IN_DMA_ADDR_HI,
+		       (u64)hwmon->dma_buf.dma_addr >> 32);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_READ_SENSORS,
+			  inbuf, sizeof(inbuf), NULL, 0, NULL);
+	if (rc == 0)
+		hwmon->last_update = jiffies;
+	return rc;
+}
+
+static ssize_t efx_mcdi_mon_show_name(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	return sprintf(buf, "%s\n", KBUILD_MODNAME);
+}
+
+static int efx_mcdi_mon_get_entry(struct device *dev, unsigned int index,
+				  efx_dword_t *entry)
+{
+	struct efx_nic *efx = dev_get_drvdata(dev);
+	struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
+	int rc;
+
+	BUILD_BUG_ON(MC_CMD_READ_SENSORS_OUT_LEN != 0);
+
+	mutex_lock(&hwmon->update_lock);
+
+	/* Use cached value if last update was < 1 s ago */
+	if (time_before(jiffies, hwmon->last_update + HZ))
+		rc = 0;
+	else
+		rc = efx_mcdi_mon_update(efx);
+
+	/* Copy out the requested entry */
+	*entry = ((efx_dword_t *)hwmon->dma_buf.addr)[index];
+
+	mutex_unlock(&hwmon->update_lock);
+
+	return rc;
+}
+
+static ssize_t efx_mcdi_mon_show_value(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct efx_mcdi_mon_attribute *mon_attr =
+		container_of(attr, struct efx_mcdi_mon_attribute, dev_attr);
+	efx_dword_t entry;
+	unsigned int value;
+	int rc;
+
+	rc = efx_mcdi_mon_get_entry(dev, mon_attr->index, &entry);
+	if (rc)
+		return rc;
+
+	value = EFX_DWORD_FIELD(entry, MC_CMD_SENSOR_VALUE_ENTRY_TYPEDEF_VALUE);
+
+	/* Convert temperature from degrees to milli-degrees Celsius */
+	if (efx_mcdi_sensor_type[mon_attr->type].hwmon_type == EFX_HWMON_TEMP)
+		value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t efx_mcdi_mon_show_limit(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct efx_mcdi_mon_attribute *mon_attr =
+		container_of(attr, struct efx_mcdi_mon_attribute, dev_attr);
+	unsigned int value;
+
+	value = mon_attr->limit_value;
+
+	/* Convert temperature from degrees to milli-degrees Celsius */
+	if (efx_mcdi_sensor_type[mon_attr->type].hwmon_type == EFX_HWMON_TEMP)
+		value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t efx_mcdi_mon_show_alarm(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct efx_mcdi_mon_attribute *mon_attr =
+		container_of(attr, struct efx_mcdi_mon_attribute, dev_attr);
+	efx_dword_t entry;
+	int state;
+	int rc;
+
+	rc = efx_mcdi_mon_get_entry(dev, mon_attr->index, &entry);
+	if (rc)
+		return rc;
+
+	state = EFX_DWORD_FIELD(entry, MC_CMD_SENSOR_VALUE_ENTRY_TYPEDEF_STATE);
+	return sprintf(buf, "%d\n", state != MC_CMD_SENSOR_STATE_OK);
+}
+
+static ssize_t efx_mcdi_mon_show_label(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct efx_mcdi_mon_attribute *mon_attr =
+		container_of(attr, struct efx_mcdi_mon_attribute, dev_attr);
+	return sprintf(buf, "%s\n",
+		       efx_mcdi_sensor_type[mon_attr->type].label);
+}
+
+static int
+efx_mcdi_mon_add_attr(struct efx_nic *efx, const char *name,
+		      ssize_t (*reader)(struct device *,
+					struct device_attribute *, char *),
+		      unsigned int index, unsigned int type,
+		      unsigned int limit_value)
+{
+	struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
+	struct efx_mcdi_mon_attribute *attr = &hwmon->attrs[hwmon->n_attrs];
+	int rc;
+
+	strlcpy(attr->name, name, sizeof(attr->name));
+	attr->index = index;
+	attr->type = type;
+	attr->limit_value = limit_value;
+	attr->dev_attr.attr.name = attr->name;
+	attr->dev_attr.attr.mode = S_IRUGO;
+	attr->dev_attr.show = reader;
+	rc = device_create_file(&efx->pci_dev->dev, &attr->dev_attr);
+	if (rc == 0)
+		++hwmon->n_attrs;
+	return rc;
+}
+
+int efx_mcdi_mon_probe(struct efx_nic *efx)
+{
+	struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
+	unsigned int n_attrs, n_temp = 0, n_cool = 0, n_in = 0;
+	u8 outbuf[MC_CMD_SENSOR_INFO_OUT_LENMAX];
+	size_t outlen;
+	char name[12];
+	u32 mask;
+	int rc, i, type;
+
+	BUILD_BUG_ON(MC_CMD_SENSOR_INFO_IN_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_SENSOR_INFO, NULL, 0,
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		return rc;
+	if (outlen < MC_CMD_SENSOR_INFO_OUT_LENMIN)
+		return -EIO;
+
+	/* Find out which sensors are present.  Don't create a device
+	 * if there are none.
+	 */
+	mask = MCDI_DWORD(outbuf, SENSOR_INFO_OUT_MASK);
+	if (mask == 0)
+		return 0;
+
+	/* Check again for short response */
+	if (outlen < MC_CMD_SENSOR_INFO_OUT_LEN(hweight32(mask)))
+		return -EIO;
+
+	rc = efx_nic_alloc_buffer(efx, &hwmon->dma_buf,
+				  4 * MC_CMD_SENSOR_ENTRY_MAXNUM);
+	if (rc)
+		return rc;
+
+	mutex_init(&hwmon->update_lock);
+	efx_mcdi_mon_update(efx);
+
+	/* Allocate space for the maximum possible number of
+	 * attributes for this set of sensors: name of the driver plus
+	 * value, min, max, crit, alarm and label for each sensor.
+	 */
+	n_attrs = 1 + 6 * hweight32(mask);
+	hwmon->attrs = kcalloc(n_attrs, sizeof(*hwmon->attrs), GFP_KERNEL);
+	if (!hwmon->attrs) {
+		rc = -ENOMEM;
+		goto fail;
+	}
+
+	hwmon->device = hwmon_device_register(&efx->pci_dev->dev);
+	if (IS_ERR(hwmon->device)) {
+		rc = PTR_ERR(hwmon->device);
+		goto fail;
+	}
+
+	rc = efx_mcdi_mon_add_attr(efx, "name", efx_mcdi_mon_show_name, 0, 0, 0);
+	if (rc)
+		goto fail;
+
+	for (i = 0, type = -1; ; i++) {
+		const char *hwmon_prefix;
+		unsigned hwmon_index;
+		u16 min1, max1, min2, max2;
+
+		/* Find next sensor type or exit if there is none */
+		type++;
+		while (!(mask & (1 << type))) {
+			type++;
+			if (type == 32)
+				return 0;
+		}
+
+		/* Skip sensors specific to a different port */
+		if (efx_mcdi_sensor_type[type].hwmon_type != EFX_HWMON_UNKNOWN &&
+		    efx_mcdi_sensor_type[type].port >= 0 &&
+		    efx_mcdi_sensor_type[type].port != efx_port_num(efx))
+			continue;
+
+		switch (efx_mcdi_sensor_type[type].hwmon_type) {
+		case EFX_HWMON_TEMP:
+			hwmon_prefix = "temp";
+			hwmon_index = ++n_temp; /* 1-based */
+			break;
+		case EFX_HWMON_COOL:
+			/* This is likely to be a heatsink, but there
+			 * is no convention for representing cooling
+			 * devices other than fans.
+			 */
+			hwmon_prefix = "fan";
+			hwmon_index = ++n_cool; /* 1-based */
+			break;
+		default:
+			hwmon_prefix = "in";
+			hwmon_index = n_in++; /* 0-based */
+			break;
+		}
+
+		min1 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY,
+					SENSOR_INFO_ENTRY, i, MIN1);
+		max1 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY,
+					SENSOR_INFO_ENTRY, i, MAX1);
+		min2 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY,
+					SENSOR_INFO_ENTRY, i, MIN2);
+		max2 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY,
+					SENSOR_INFO_ENTRY, i, MAX2);
+
+		if (min1 != max1) {
+			snprintf(name, sizeof(name), "%s%u_input",
+				 hwmon_prefix, hwmon_index);
+			rc = efx_mcdi_mon_add_attr(
+				efx, name, efx_mcdi_mon_show_value, i, type, 0);
+			if (rc)
+				goto fail;
+
+			snprintf(name, sizeof(name), "%s%u_min",
+				 hwmon_prefix, hwmon_index);
+			rc = efx_mcdi_mon_add_attr(
+				efx, name, efx_mcdi_mon_show_limit,
+				i, type, min1);
+			if (rc)
+				goto fail;
+
+			snprintf(name, sizeof(name), "%s%u_max",
+				 hwmon_prefix, hwmon_index);
+			rc = efx_mcdi_mon_add_attr(
+				efx, name, efx_mcdi_mon_show_limit,
+				i, type, max1);
+			if (rc)
+				goto fail;
+
+			if (min2 != max2) {
+				/* Assume max2 is critical value.
+				 * But we have no good way to expose min2.
+				 */
+				snprintf(name, sizeof(name), "%s%u_crit",
+					 hwmon_prefix, hwmon_index);
+				rc = efx_mcdi_mon_add_attr(
+					efx, name, efx_mcdi_mon_show_limit,
+					i, type, max2);
+				if (rc)
+					goto fail;
+			}
+		}
+
+		snprintf(name, sizeof(name), "%s%u_alarm",
+			 hwmon_prefix, hwmon_index);
+		rc = efx_mcdi_mon_add_attr(
+			efx, name, efx_mcdi_mon_show_alarm, i, type, 0);
+		if (rc)
+			goto fail;
+
+		if (efx_mcdi_sensor_type[type].label) {
+			snprintf(name, sizeof(name), "%s%u_label",
+				 hwmon_prefix, hwmon_index);
+			rc = efx_mcdi_mon_add_attr(
+				efx, name, efx_mcdi_mon_show_label, i, type, 0);
+			if (rc)
+				goto fail;
+		}
+	}
+
+fail:
+	efx_mcdi_mon_remove(efx);
+	return rc;
+}
+
+void efx_mcdi_mon_remove(struct efx_nic *efx)
+{
+	struct siena_nic_data *nic_data = efx->nic_data;
+	struct efx_mcdi_mon *hwmon = &nic_data->hwmon;
+	unsigned int i;
+
+	for (i = 0; i < hwmon->n_attrs; i++)
+		device_remove_file(&efx->pci_dev->dev,
+				   &hwmon->attrs[i].dev_attr);
+	kfree(hwmon->attrs);
+	if (hwmon->device)
+		hwmon_device_unregister(hwmon->device);
+	efx_nic_free_buffer(efx, &hwmon->dma_buf);
+}
+
+#endif /* CONFIG_SFC_MCDI_MON */