diff options
Diffstat (limited to 'arch/sh/boards/superh/microdev/io.c')
| -rw-r--r-- | arch/sh/boards/superh/microdev/io.c | 367 |
1 files changed, 0 insertions, 367 deletions
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c deleted file mode 100644 index 9f8a540f7e14..000000000000 --- a/arch/sh/boards/superh/microdev/io.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * linux/arch/sh/boards/superh/microdev/io.c - * - * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) - * Copyright (C) 2003, 2004 SuperH, Inc. - * Copyright (C) 2004 Paul Mundt - * - * SuperH SH4-202 MicroDev board support. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - */ - -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/wait.h> -#include <asm/io.h> -#include <asm/microdev.h> - - /* - * we need to have a 'safe' address to re-direct all I/O requests - * that we do not explicitly wish to handle. This safe address - * must have the following properies: - * - * * writes are ignored (no exception) - * * reads are benign (no side-effects) - * * accesses of width 1, 2 and 4-bytes are all valid. - * - * The Processor Version Register (PVR) has these properties. - */ -#define PVR 0xff000030 /* Processor Version Register */ - - -#define IO_IDE2_BASE 0x170ul /* I/O base for SMSC FDC37C93xAPM IDE #2 */ -#define IO_IDE1_BASE 0x1f0ul /* I/O base for SMSC FDC37C93xAPM IDE #1 */ -#define IO_ISP1161_BASE 0x290ul /* I/O port for Philips ISP1161x USB chip */ -#define IO_SERIAL2_BASE 0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */ -#define IO_LAN91C111_BASE 0x300ul /* I/O base for SMSC LAN91C111 Ethernet chip */ -#define IO_IDE2_MISC 0x376ul /* I/O misc for SMSC FDC37C93xAPM IDE #2 */ -#define IO_SUPERIO_BASE 0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */ -#define IO_IDE1_MISC 0x3f6ul /* I/O misc for SMSC FDC37C93xAPM IDE #1 */ -#define IO_SERIAL1_BASE 0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */ - -#define IO_ISP1161_EXTENT 0x04ul /* I/O extent for Philips ISP1161x USB chip */ -#define IO_LAN91C111_EXTENT 0x10ul /* I/O extent for SMSC LAN91C111 Ethernet chip */ -#define IO_SUPERIO_EXTENT 0x02ul /* I/O extent for SMSC FDC37C93xAPM SuperIO chip */ -#define IO_IDE_EXTENT 0x08ul /* I/O extent for IDE Task Register set */ -#define IO_SERIAL_EXTENT 0x10ul - -#define IO_LAN91C111_PHYS 0xa7500000ul /* Physical address of SMSC LAN91C111 Ethernet chip */ -#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */ -#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */ - -/* - * map I/O ports to memory-mapped addresses - */ -static unsigned long microdev_isa_port2addr(unsigned long offset) -{ - unsigned long result; - - if ((offset >= IO_LAN91C111_BASE) && - (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { - /* - * SMSC LAN91C111 Ethernet chip - */ - result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE; - } else if ((offset >= IO_SUPERIO_BASE) && - (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * Configuration Registers - */ - result = IO_SUPERIO_PHYS + (offset << 1); -#if 0 - } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG || - offset == KBD_STATUS_REG) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * PS/2 Keyboard + Mouse (ports 0x60 and 0x64). - */ - result = IO_SUPERIO_PHYS + (offset << 1); -#endif - } else if (((offset >= IO_IDE1_BASE) && - (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) || - (offset == IO_IDE1_MISC)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * IDE #1 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if (((offset >= IO_IDE2_BASE) && - (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) || - (offset == IO_IDE2_MISC)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * IDE #2 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if ((offset >= IO_SERIAL1_BASE) && - (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * Serial #1 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if ((offset >= IO_SERIAL2_BASE) && - (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * Serial #2 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if ((offset >= IO_ISP1161_BASE) && - (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) { - /* - * Philips USB ISP1161x chip - */ - result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE; - } else { - /* - * safe default. - */ - printk("Warning: unexpected port in %s( offset = 0x%lx )\n", - __func__, offset); - result = PVR; - } - - return result; -} - -#define PORT2ADDR(x) (microdev_isa_port2addr(x)) - -static inline void delay(void) -{ -#if defined(CONFIG_PCI) - /* System board present, just make a dummy SRAM access. (CS0 will be - mapped to PCI memory, probably good to avoid it.) */ - ctrl_inw(0xa6800000); -#else - /* CS0 will be mapped to flash, ROM etc so safe to access it. */ - ctrl_inw(0xa0000000); -#endif -} - -unsigned char microdev_inb(unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) - return microdev_pci_inb(port); -#endif - return *(volatile unsigned char*)PORT2ADDR(port); -} - -unsigned short microdev_inw(unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) - return microdev_pci_inw(port); -#endif - return *(volatile unsigned short*)PORT2ADDR(port); -} - -unsigned int microdev_inl(unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) - return microdev_pci_inl(port); -#endif - return *(volatile unsigned int*)PORT2ADDR(port); -} - -void microdev_outw(unsigned short b, unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) { - microdev_pci_outw(b, port); - return; - } -#endif - *(volatile unsigned short*)PORT2ADDR(port) = b; -} - -void microdev_outb(unsigned char b, unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) { - microdev_pci_outb(b, port); - return; - } -#endif - - /* - * There is a board feature with the current SH4-202 MicroDev in - * that the 2 byte enables (nBE0 and nBE1) are tied together (and - * to the Chip Select Line (Ethernet_CS)). Due to this connectivity, - * it is not possible to safely perform 8-bit writes to the - * Ethernet registers, as 16-bits will be consumed from the Data - * lines (corrupting the other byte). Hence, this function is - * written to implement 16-bit read/modify/write for all byte-wide - * accesses. - * - * Note: there is no problem with byte READS (even or odd). - * - * Sean McGoogan - 16th June 2003. - */ - if ((port >= IO_LAN91C111_BASE) && - (port < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { - /* - * Then are trying to perform a byte-write to the - * LAN91C111. This needs special care. - */ - if (port % 2 == 1) { /* is the port odd ? */ - /* unset bit-0, i.e. make even */ - const unsigned long evenPort = port-1; - unsigned short word; - - /* - * do a 16-bit read/write to write to 'port', - * preserving even byte. - * - * Even addresses are bits 0-7 - * Odd addresses are bits 8-15 - */ - word = microdev_inw(evenPort); - word = (word & 0xffu) | (b << 8); - microdev_outw(word, evenPort); - } else { - /* else, we are trying to do an even byte write */ - unsigned short word; - - /* - * do a 16-bit read/write to write to 'port', - * preserving odd byte. - * - * Even addresses are bits 0-7 - * Odd addresses are bits 8-15 - */ - word = microdev_inw(port); - word = (word & 0xff00u) | (b); - microdev_outw(word, port); - } - } else { - *(volatile unsigned char*)PORT2ADDR(port) = b; - } -} - -void microdev_outl(unsigned int b, unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) { - microdev_pci_outl(b, port); - return; - } -#endif - *(volatile unsigned int*)PORT2ADDR(port) = b; -} - -unsigned char microdev_inb_p(unsigned long port) -{ - unsigned char v = microdev_inb(port); - delay(); - return v; -} - -unsigned short microdev_inw_p(unsigned long port) -{ - unsigned short v = microdev_inw(port); - delay(); - return v; -} - -unsigned int microdev_inl_p(unsigned long port) -{ - unsigned int v = microdev_inl(port); - delay(); - return v; -} - -void microdev_outb_p(unsigned char b, unsigned long port) -{ - microdev_outb(b, port); - delay(); -} - -void microdev_outw_p(unsigned short b, unsigned long port) -{ - microdev_outw(b, port); - delay(); -} - -void microdev_outl_p(unsigned int b, unsigned long port) -{ - microdev_outl(b, port); - delay(); -} - -void microdev_insb(unsigned long port, void *buffer, unsigned long count) -{ - volatile unsigned char *port_addr; - unsigned char *buf = buffer; - - port_addr = (volatile unsigned char *)PORT2ADDR(port); - - while (count--) - *buf++ = *port_addr; -} - -void microdev_insw(unsigned long port, void *buffer, unsigned long count) -{ - volatile unsigned short *port_addr; - unsigned short *buf = buffer; - - port_addr = (volatile unsigned short *)PORT2ADDR(port); - - while (count--) - *buf++ = *port_addr; -} - -void microdev_insl(unsigned long port, void *buffer, unsigned long count) -{ - volatile unsigned long *port_addr; - unsigned int *buf = buffer; - - port_addr = (volatile unsigned long *)PORT2ADDR(port); - - while (count--) - *buf++ = *port_addr; -} - -void microdev_outsb(unsigned long port, const void *buffer, unsigned long count) -{ - volatile unsigned char *port_addr; - const unsigned char *buf = buffer; - - port_addr = (volatile unsigned char *)PORT2ADDR(port); - - while (count--) - *port_addr = *buf++; -} - -void microdev_outsw(unsigned long port, const void *buffer, unsigned long count) -{ - volatile unsigned short *port_addr; - const unsigned short *buf = buffer; - - port_addr = (volatile unsigned short *)PORT2ADDR(port); - - while (count--) - *port_addr = *buf++; -} - -void microdev_outsl(unsigned long port, const void *buffer, unsigned long count) -{ - volatile unsigned long *port_addr; - const unsigned int *buf = buffer; - - port_addr = (volatile unsigned long *)PORT2ADDR(port); - - while (count--) - *port_addr = *buf++; -} |