diff options
Diffstat (limited to 'sound/soc/codecs/wm8961.c')
| -rw-r--r-- | sound/soc/codecs/wm8961.c | 231 |
1 files changed, 85 insertions, 146 deletions
diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c index bd1af92a122f..503032085899 100644 --- a/sound/soc/codecs/wm8961.c +++ b/sound/soc/codecs/wm8961.c @@ -292,9 +292,10 @@ struct wm8961_priv { u16 reg_cache[WM8961_MAX_REGISTER]; }; -static int wm8961_reg_is_volatile(int reg) +static int wm8961_volatile_register(unsigned int reg) { switch (reg) { + case WM8961_SOFTWARE_RESET: case WM8961_WRITE_SEQUENCER_7: case WM8961_DC_SERVO_1: return 1; @@ -304,76 +305,9 @@ static int wm8961_reg_is_volatile(int reg) } } -static unsigned int wm8961_read_reg_cache(struct snd_soc_codec *codec, - unsigned int reg) -{ - u16 *cache = codec->reg_cache; - BUG_ON(reg > WM8961_MAX_REGISTER); - return cache[reg]; -} - -static unsigned int wm8961_read_hw(struct snd_soc_codec *codec, u8 reg) -{ - struct i2c_msg xfer[2]; - u16 data; - int ret; - struct i2c_client *client = codec->control_data; - - BUG_ON(reg > WM8961_MAX_REGISTER); - - /* Write register */ - xfer[0].addr = client->addr; - xfer[0].flags = 0; - xfer[0].len = 1; - xfer[0].buf = ® - - /* Read data */ - xfer[1].addr = client->addr; - xfer[1].flags = I2C_M_RD; - xfer[1].len = 2; - xfer[1].buf = (u8 *)&data; - - ret = i2c_transfer(client->adapter, xfer, 2); - if (ret != 2) { - dev_err(&client->dev, "i2c_transfer() returned %d\n", ret); - return 0; - } - - return (data >> 8) | ((data & 0xff) << 8); -} - -static unsigned int wm8961_read(struct snd_soc_codec *codec, unsigned int reg) -{ - if (wm8961_reg_is_volatile(reg)) - return wm8961_read_hw(codec, reg); - else - return wm8961_read_reg_cache(codec, reg); -} - -static int wm8961_write(struct snd_soc_codec *codec, unsigned int reg, - unsigned int value) -{ - u16 *cache = codec->reg_cache; - u8 data[3]; - - BUG_ON(reg > WM8961_MAX_REGISTER); - - if (!wm8961_reg_is_volatile(reg)) - cache[reg] = value; - - data[0] = reg; - data[1] = value >> 8; - data[2] = value & 0x00ff; - - if (codec->hw_write(codec->control_data, data, 3) == 3) - return 0; - else - return -EIO; -} - static int wm8961_reset(struct snd_soc_codec *codec) { - return wm8961_write(codec, WM8961_SOFTWARE_RESET, 0); + return snd_soc_write(codec, WM8961_SOFTWARE_RESET, 0); } /* @@ -384,33 +318,33 @@ static int wm8961_hp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; - u16 hp_reg = wm8961_read(codec, WM8961_ANALOGUE_HP_0); - u16 cp_reg = wm8961_read(codec, WM8961_CHARGE_PUMP_1); - u16 pwr_reg = wm8961_read(codec, WM8961_PWR_MGMT_2); - u16 dcs_reg = wm8961_read(codec, WM8961_DC_SERVO_1); + u16 hp_reg = snd_soc_read(codec, WM8961_ANALOGUE_HP_0); + u16 cp_reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_1); + u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2); + u16 dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1); int timeout = 500; if (event & SND_SOC_DAPM_POST_PMU) { /* Make sure the output is shorted */ hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT); - wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); + snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); /* Enable the charge pump */ cp_reg |= WM8961_CP_ENA; - wm8961_write(codec, WM8961_CHARGE_PUMP_1, cp_reg); + snd_soc_write(codec, WM8961_CHARGE_PUMP_1, cp_reg); mdelay(5); /* Enable the PGA */ pwr_reg |= WM8961_LOUT1_PGA | WM8961_ROUT1_PGA; - wm8961_write(codec, WM8961_PWR_MGMT_2, pwr_reg); + snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg); /* Enable the amplifier */ hp_reg |= WM8961_HPR_ENA | WM8961_HPL_ENA; - wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); + snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); /* Second stage enable */ hp_reg |= WM8961_HPR_ENA_DLY | WM8961_HPL_ENA_DLY; - wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); + snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); /* Enable the DC servo & trigger startup */ dcs_reg |= @@ -418,10 +352,10 @@ static int wm8961_hp_event(struct snd_soc_dapm_widget *w, WM8961_DCS_ENA_CHAN_HPL | WM8961_DCS_TRIG_STARTUP_HPL; dev_dbg(codec->dev, "Enabling DC servo\n"); - wm8961_write(codec, WM8961_DC_SERVO_1, dcs_reg); + snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg); do { msleep(1); - dcs_reg = wm8961_read(codec, WM8961_DC_SERVO_1); + dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1); } while (--timeout && dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR | WM8961_DCS_TRIG_STARTUP_HPL)); @@ -433,39 +367,39 @@ static int wm8961_hp_event(struct snd_soc_dapm_widget *w, /* Enable the output stage */ hp_reg |= WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP; - wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); + snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); /* Remove the short on the output stage */ hp_reg |= WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT; - wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); + snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); } if (event & SND_SOC_DAPM_PRE_PMD) { /* Short the output */ hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT); - wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); + snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); /* Disable the output stage */ hp_reg &= ~(WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP); - wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); + snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); /* Disable DC offset cancellation */ dcs_reg &= ~(WM8961_DCS_ENA_CHAN_HPR | WM8961_DCS_ENA_CHAN_HPL); - wm8961_write(codec, WM8961_DC_SERVO_1, dcs_reg); + snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg); /* Finish up */ hp_reg &= ~(WM8961_HPR_ENA_DLY | WM8961_HPR_ENA | WM8961_HPL_ENA_DLY | WM8961_HPL_ENA); - wm8961_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); + snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg); /* Disable the PGA */ pwr_reg &= ~(WM8961_LOUT1_PGA | WM8961_ROUT1_PGA); - wm8961_write(codec, WM8961_PWR_MGMT_2, pwr_reg); + snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg); /* Disable the charge pump */ dev_dbg(codec->dev, "Disabling charge pump\n"); - wm8961_write(codec, WM8961_CHARGE_PUMP_1, + snd_soc_write(codec, WM8961_CHARGE_PUMP_1, cp_reg & ~WM8961_CP_ENA); } @@ -476,27 +410,27 @@ static int wm8961_spk_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; - u16 pwr_reg = wm8961_read(codec, WM8961_PWR_MGMT_2); - u16 spk_reg = wm8961_read(codec, WM8961_CLASS_D_CONTROL_1); + u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2); + u16 spk_reg = snd_soc_read(codec, WM8961_CLASS_D_CONTROL_1); if (event & SND_SOC_DAPM_POST_PMU) { /* Enable the PGA */ pwr_reg |= WM8961_SPKL_PGA | WM8961_SPKR_PGA; - wm8961_write(codec, WM8961_PWR_MGMT_2, pwr_reg); + snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg); /* Enable the amplifier */ spk_reg |= WM8961_SPKL_ENA | WM8961_SPKR_ENA; - wm8961_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg); + snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg); } if (event & SND_SOC_DAPM_PRE_PMD) { /* Enable the amplifier */ spk_reg &= ~(WM8961_SPKL_ENA | WM8961_SPKR_ENA); - wm8961_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg); + snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg); /* Enable the PGA */ pwr_reg &= ~(WM8961_SPKL_PGA | WM8961_SPKR_PGA); - wm8961_write(codec, WM8961_PWR_MGMT_2, pwr_reg); + snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg); } return 0; @@ -714,10 +648,10 @@ static int wm8961_hw_params(struct snd_pcm_substream *substream, abs(wm8961_srate[best].rate - fs)) best = i; } - reg = wm8961_read(codec, WM8961_ADDITIONAL_CONTROL_3); + reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_3); reg &= ~WM8961_SAMPLE_RATE_MASK; reg |= wm8961_srate[best].val; - wm8961_write(codec, WM8961_ADDITIONAL_CONTROL_3, reg); + snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_3, reg); dev_dbg(codec->dev, "Selected SRATE %dHz for %dHz\n", wm8961_srate[best].rate, fs); @@ -747,12 +681,12 @@ static int wm8961_hw_params(struct snd_pcm_substream *substream, wm8961_clk_sys_ratio[i].ratio, wm8961->sysclk, fs, wm8961->sysclk / fs); - reg = wm8961_read(codec, WM8961_CLOCKING_4); + reg = snd_soc_read(codec, WM8961_CLOCKING_4); reg &= ~WM8961_CLK_SYS_RATE_MASK; reg |= wm8961_clk_sys_ratio[i].val << WM8961_CLK_SYS_RATE_SHIFT; - wm8961_write(codec, WM8961_CLOCKING_4, reg); + snd_soc_write(codec, WM8961_CLOCKING_4, reg); - reg = wm8961_read(codec, WM8961_AUDIO_INTERFACE_0); + reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0); reg &= ~WM8961_WL_MASK; switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: @@ -769,15 +703,15 @@ static int wm8961_hw_params(struct snd_pcm_substream *substream, default: return -EINVAL; } - wm8961_write(codec, WM8961_AUDIO_INTERFACE_0, reg); + snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, reg); /* Sloping stop-band filter is recommended for <= 24kHz */ - reg = wm8961_read(codec, WM8961_ADC_DAC_CONTROL_2); + reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2); if (fs <= 24000) reg |= WM8961_DACSLOPE; else reg &= WM8961_DACSLOPE; - wm8961_write(codec, WM8961_ADC_DAC_CONTROL_2, reg); + snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg); return 0; } @@ -788,7 +722,7 @@ static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id, { struct snd_soc_codec *codec = dai->codec; struct wm8961_priv *wm8961 = codec->private_data; - u16 reg = wm8961_read(codec, WM8961_CLOCKING1); + u16 reg = snd_soc_read(codec, WM8961_CLOCKING1); if (freq > 33000000) { dev_err(codec->dev, "MCLK must be <33MHz\n"); @@ -804,7 +738,7 @@ static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id, reg &= WM8961_MCLKDIV; } - wm8961_write(codec, WM8961_CLOCKING1, reg); + snd_soc_write(codec, WM8961_CLOCKING1, reg); wm8961->sysclk = freq; @@ -814,7 +748,7 @@ static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id, static int wm8961_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) { struct snd_soc_codec *codec = dai->codec; - u16 aif = wm8961_read(codec, WM8961_AUDIO_INTERFACE_0); + u16 aif = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0); aif &= ~(WM8961_BCLKINV | WM8961_LRP | WM8961_MS | WM8961_FORMAT_MASK); @@ -874,26 +808,26 @@ static int wm8961_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) return -EINVAL; } - return wm8961_write(codec, WM8961_AUDIO_INTERFACE_0, aif); + return snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, aif); } static int wm8961_set_tristate(struct snd_soc_dai *dai, int tristate) { struct snd_soc_codec *codec = dai->codec; - u16 reg = wm8961_read(codec, WM8961_ADDITIONAL_CONTROL_2); + u16 reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_2); if (tristate) reg |= WM8961_TRIS; else reg &= ~WM8961_TRIS; - return wm8961_write(codec, WM8961_ADDITIONAL_CONTROL_2, reg); + return snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_2, reg); } static int wm8961_digital_mute(struct snd_soc_dai *dai, int mute) { struct snd_soc_codec *codec = dai->codec; - u16 reg = wm8961_read(codec, WM8961_ADC_DAC_CONTROL_1); + u16 reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_1); if (mute) reg |= WM8961_DACMU; @@ -902,7 +836,7 @@ static int wm8961_digital_mute(struct snd_soc_dai *dai, int mute) msleep(17); - return wm8961_write(codec, WM8961_ADC_DAC_CONTROL_1, reg); + return snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_1, reg); } static int wm8961_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div) @@ -912,17 +846,17 @@ static int wm8961_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div) switch (div_id) { case WM8961_BCLK: - reg = wm8961_read(codec, WM8961_CLOCKING2); + reg = snd_soc_read(codec, WM8961_CLOCKING2); reg &= ~WM8961_BCLKDIV_MASK; reg |= div; - wm8961_write(codec, WM8961_CLOCKING2, reg); + snd_soc_write(codec, WM8961_CLOCKING2, reg); break; case WM8961_LRCLK: - reg = wm8961_read(codec, WM8961_AUDIO_INTERFACE_2); + reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_2); reg &= ~WM8961_LRCLK_RATE_MASK; reg |= div; - wm8961_write(codec, WM8961_AUDIO_INTERFACE_2, reg); + snd_soc_write(codec, WM8961_AUDIO_INTERFACE_2, reg); break; default: @@ -949,34 +883,34 @@ static int wm8961_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_PREPARE: if (codec->bias_level == SND_SOC_BIAS_STANDBY) { /* Enable bias generation */ - reg = wm8961_read(codec, WM8961_ANTI_POP); + reg = snd_soc_read(codec, WM8961_ANTI_POP); reg |= WM8961_BUFIOEN | WM8961_BUFDCOPEN; - wm8961_write(codec, WM8961_ANTI_POP, reg); + snd_soc_write(codec, WM8961_ANTI_POP, reg); /* VMID=2*50k, VREF */ - reg = wm8961_read(codec, WM8961_PWR_MGMT_1); + reg = snd_soc_read(codec, WM8961_PWR_MGMT_1); reg &= ~WM8961_VMIDSEL_MASK; reg |= (1 << WM8961_VMIDSEL_SHIFT) | WM8961_VREF; - wm8961_write(codec, WM8961_PWR_MGMT_1, reg); + snd_soc_write(codec, WM8961_PWR_MGMT_1, reg); } break; case SND_SOC_BIAS_STANDBY: if (codec->bias_level == SND_SOC_BIAS_PREPARE) { /* VREF off */ - reg = wm8961_read(codec, WM8961_PWR_MGMT_1); + reg = snd_soc_read(codec, WM8961_PWR_MGMT_1); reg &= ~WM8961_VREF; - wm8961_write(codec, WM8961_PWR_MGMT_1, reg); + snd_soc_write(codec, WM8961_PWR_MGMT_1, reg); /* Bias generation off */ - reg = wm8961_read(codec, WM8961_ANTI_POP); + reg = snd_soc_read(codec, WM8961_ANTI_POP); reg &= ~(WM8961_BUFIOEN | WM8961_BUFDCOPEN); - wm8961_write(codec, WM8961_ANTI_POP, reg); + snd_soc_write(codec, WM8961_ANTI_POP, reg); /* VMID off */ - reg = wm8961_read(codec, WM8961_PWR_MGMT_1); + reg = snd_soc_read(codec, WM8961_PWR_MGMT_1); reg &= ~WM8961_VMIDSEL_MASK; - wm8961_write(codec, WM8961_PWR_MGMT_1, reg); + snd_soc_write(codec, WM8961_PWR_MGMT_1, reg); } break; @@ -1101,7 +1035,7 @@ static int wm8961_resume(struct platform_device *pdev) if (i == WM8961_SOFTWARE_RESET) continue; - wm8961_write(codec, i, reg_cache[i]); + snd_soc_write(codec, i, reg_cache[i]); } wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY); @@ -1140,26 +1074,32 @@ static int wm8961_register(struct wm8961_priv *wm8961) codec->private_data = wm8961; codec->name = "WM8961"; codec->owner = THIS_MODULE; - codec->read = wm8961_read; - codec->write = wm8961_write; codec->dai = &wm8961_dai; codec->num_dai = 1; codec->reg_cache_size = ARRAY_SIZE(wm8961->reg_cache); codec->reg_cache = &wm8961->reg_cache; codec->bias_level = SND_SOC_BIAS_OFF; codec->set_bias_level = wm8961_set_bias_level; + codec->volatile_register = wm8961_volatile_register; memcpy(codec->reg_cache, wm8961_reg_defaults, sizeof(wm8961_reg_defaults)); - reg = wm8961_read_hw(codec, WM8961_SOFTWARE_RESET); + ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C); + if (ret != 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + goto err; + } + + reg = snd_soc_read(codec, WM8961_SOFTWARE_RESET); if (reg != 0x1801) { dev_err(codec->dev, "Device is not a WM8961: ID=0x%x\n", reg); ret = -EINVAL; goto err; } - reg = wm8961_read_hw(codec, WM8961_RIGHT_INPUT_VOLUME); + /* This isn't volatile - readback doesn't correspond to write */ + reg = codec->hw_read(codec, WM8961_RIGHT_INPUT_VOLUME); dev_info(codec->dev, "WM8961 family %d revision %c\n", (reg & WM8961_DEVICE_ID_MASK) >> WM8961_DEVICE_ID_SHIFT, ((reg & WM8961_CHIP_REV_MASK) >> WM8961_CHIP_REV_SHIFT) @@ -1172,37 +1112,37 @@ static int wm8961_register(struct wm8961_priv *wm8961) } /* Enable class W */ - reg = wm8961_read(codec, WM8961_CHARGE_PUMP_B); + reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_B); reg |= WM8961_CP_DYN_PWR_MASK; - wm8961_write(codec, WM8961_CHARGE_PUMP_B, reg); + snd_soc_write(codec, WM8961_CHARGE_PUMP_B, reg); /* Latch volume update bits (right channel only, we always * write both out) and default ZC on. */ - reg = wm8961_read(codec, WM8961_ROUT1_VOLUME); - wm8961_write(codec, WM8961_ROUT1_VOLUME, + reg = snd_soc_read(codec, WM8961_ROUT1_VOLUME); + snd_soc_write(codec, WM8961_ROUT1_VOLUME, reg | WM8961_LO1ZC | WM8961_OUT1VU); - wm8961_write(codec, WM8961_LOUT1_VOLUME, reg | WM8961_LO1ZC); - reg = wm8961_read(codec, WM8961_ROUT2_VOLUME); - wm8961_write(codec, WM8961_ROUT2_VOLUME, + snd_soc_write(codec, WM8961_LOUT1_VOLUME, reg | WM8961_LO1ZC); + reg = snd_soc_read(codec, WM8961_ROUT2_VOLUME); + snd_soc_write(codec, WM8961_ROUT2_VOLUME, reg | WM8961_SPKRZC | WM8961_SPKVU); - wm8961_write(codec, WM8961_LOUT2_VOLUME, reg | WM8961_SPKLZC); + snd_soc_write(codec, WM8961_LOUT2_VOLUME, reg | WM8961_SPKLZC); - reg = wm8961_read(codec, WM8961_RIGHT_ADC_VOLUME); - wm8961_write(codec, WM8961_RIGHT_ADC_VOLUME, reg | WM8961_ADCVU); - reg = wm8961_read(codec, WM8961_RIGHT_INPUT_VOLUME); - wm8961_write(codec, WM8961_RIGHT_INPUT_VOLUME, reg | WM8961_IPVU); + reg = snd_soc_read(codec, WM8961_RIGHT_ADC_VOLUME); + snd_soc_write(codec, WM8961_RIGHT_ADC_VOLUME, reg | WM8961_ADCVU); + reg = snd_soc_read(codec, WM8961_RIGHT_INPUT_VOLUME); + snd_soc_write(codec, WM8961_RIGHT_INPUT_VOLUME, reg | WM8961_IPVU); /* Use soft mute by default */ - reg = wm8961_read(codec, WM8961_ADC_DAC_CONTROL_2); + reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2); reg |= WM8961_DACSMM; - wm8961_write(codec, WM8961_ADC_DAC_CONTROL_2, reg); + snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg); /* Use automatic clocking mode by default; for now this is all * we support. */ - reg = wm8961_read(codec, WM8961_CLOCKING_3); + reg = snd_soc_read(codec, WM8961_CLOCKING_3); reg &= ~WM8961_MANUAL_MODE; - wm8961_write(codec, WM8961_CLOCKING_3, reg); + snd_soc_write(codec, WM8961_CLOCKING_3, reg); wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY); @@ -1250,7 +1190,6 @@ static __devinit int wm8961_i2c_probe(struct i2c_client *i2c, return -ENOMEM; codec = &wm8961->codec; - codec->hw_write = (hw_write_t)i2c_master_send; i2c_set_clientdata(i2c, wm8961); codec->control_data = i2c; |