summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/wl12xx/wl1271.h
Commit message (Collapse)AuthorAgeFilesLines
* wl1271: Change wl12xx Files NamesShahar Levi2010-11-221-523/+0
| | | | | | | | | All files name prefix removed due to the fact that wl12xx driver supports wl1271 and wl1273. Also the definition in Kconfig and header files changed respectively. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: 11n Support, Add DefinitionsShahar Levi2010-11-151-1/+10
| | | | | | | | | Two acx commands: ht_capabilities & ht_information, 11n sta capabilities macro. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Allocate TX descriptors more efficientlyIdo Yariv2010-11-151-0/+1
| | | | | | | | | | | | On each TX descriptor allocation, a free entry is found by traversing the TX descriptors array. Improve this by holding a bitmap of all TX descriptors, and using efficient bit operations to search for free entries. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Fix TX starvationIdo Yariv2010-11-151-0/+1
| | | | | | | | | | | | | | | While wl1271_irq_work handles RX directly (by calling wl1271_rx), a different work is scheduled for transmitting packets. The IRQ work might handle more than one interrupt during a single call, including multiple TX completion interrupts. This might starve TX, since no packets are transmitted until all interrupts are handled. Fix this by calling the TX work function directly, instead of deferring it. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Support firmware RX packet aggregationIdo Yariv2010-10-051-0/+5
| | | | | | | | | | | Instead of retrieving one packet at a time from the firmware, try to retrieve all available packets at once. This optimization decreases the number of transactions, which saves CPU cycles and increases network throughput. Signed-off-by: Ido Yariv <ido@wizery.com> Tested-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Add support for hardware GEM cipherJuuso Oikarinen2010-09-281-0/+2
| | | | | | | | This patch adds support for the hardware GEM cipher suite. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Add handling for failing hardware scan commandJuuso Oikarinen2010-09-281-1/+2
| | | | | | | | | | | | Currently, the driver does not handle a failing hardware command to scan in any way - effectively, the scan machine will jam until the driver is shut down, and future scan requests will just return -EBUSY to user space, resulting in a type of busy-loop. The same problem occurs if the firmware fails to deliver the scan completion event - add timeout for this. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Add hardware recovery mechanismJuuso Oikarinen2010-09-281-0/+3
| | | | | | | | | | There is some probability of hardware failures, which currently go largely undetected. Attempt to recover from these failures by shutting down the hardware, and requesting mac80211 to reconfigure it. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Move scan complete invocation into work functionJuuso Oikarinen2010-09-281-0/+1
| | | | | | | | | | The current scan implementation can jam, if the scan request ends up containing no work. This can especially happen if there is a scan request with only 11a band channels for HW that does not support 11a. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Enable/disable 11a support based on INI configurationJuuso Oikarinen2010-09-281-15/+3
| | | | | | | | | Instead of hardcoding 11a support, enable/disable driver support based on the dual-mode-select parameter in the nvs-file general paramters. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: Add trigger to net_device oper_state to change BT coex priorityJuuso Oikarinen2010-09-281-0/+1
| | | | | | | | | | Add a trigger to net_device changes to monitor for oper_state changes in order to be able to inform the firmware when association is fully complete (including the EAP negotiation.) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
* wl1271: make ref_clock configurable by boardOhad Ben-Cohen2010-09-211-0/+1
| | | | | | | | | | | The wl1271 device is using a reference clock that may change between board to board. Make the ref_clock parameter configurable by board settings instead of having a hard coded value in the sources. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: propagate set_power's return valueOhad Ben-Cohen2010-09-211-1/+1
| | | | | | | | | | | Make it possible for the set power method to indicate a success/failure return value. This is needed to support more complex power on/off operations such as SDIO power manipulations. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: add get_survey callback in order to get channel noiseJohn W. Linville2010-07-291-0/+3
| | | | | Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
* Merge branch 'master' of ↵John W. Linville2010-07-131-11/+13
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/wl12xx/wl1271_cmd.h
| * wl1271: rewritten scanning codeLuciano Coelho2010-07-081-12/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a complete rewrite of the scanning code. It now includes a state machine to scan all four possible sets of channels independently: 2.4GHz active, 2.4GHz passive, 5GHz active and 5GHz passive. The wl1271 firmware doesn't allow these sets to be mixed, so up to several scan commands have to be issued. This patch also allows scanning more than 24 channels per set, by breaking the sets into smaller parts if needed (the firmware can scan a maximum of 24 channels at a time). Previously, the scanning code was erroneously scanning all channels possible actively, not complying with the CRDA values. This is also fixed with this patch. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Work around AP's with broken ps-poll functionalityJuuso Oikarinen2010-07-081-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some AP's (such as Zyxel Prestige 600) have totally broken ps-poll functionality. When powersave is enabled, these AP's will set the TIM bit for a STA in beacons, but when the STA responds with a ps-poll, the AP does not respond with data. The wl1271 firmware is able to send an indication to the host, when this problem occurs. This patch adds implementation, which temporarily disables power-save in response to this indication, allowing the AP to transmit whatever data it has buffered for the STA / whatever data is inbound at that time. This patch does not make these AP's work reliably in PSM, but improves the chances of inbound data getting through. The side effect of this patch is increased power consumption when using a faulty AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵David S. Miller2010-06-111-27/+4
|\ \ | |/ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/wl12xx/wl1271.h drivers/net/wireless/wl12xx/wl1271_cmd.h
| * wl1271: Fix scan parameter handling for 5GHzJuuso Oikarinen2010-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | The 5GHz bands were scanned without the proper IE's in place, preventing proper 5GHz scanning. This patches fixes the problem by storing a pointer to the scan request (with the IE's) for all iterations of scan. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Flush TX buffers to air before going to idleJuuso Oikarinen2010-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mac80211 changes to idle almost immediately after transmitting some frames, such as deauth etc. When going to idle, the wl1271 is disconnected, which causes TX frames already on buffers, but not yet transmitted, to be deleted. To make sure deauth frames reach the air, allow the TX buffers to flush before proceeding to idle. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Idle handling into own functionJuuso Oikarinen2010-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | As there is more and more stuff triggered by going in and out of idle, create a separate function for handling that. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wl1271: Update handling of the NVS file / INI parametersJuuso Oikarinen2010-06-021-27/+1
| | | | | | | | | | | | | | | | | | | | | | This patch updates the handling of the NVS file INI-section, trying to make it slightly more generic, and exposing the parameters being set. This is done in preparation for 5GHz parameters. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | drivers/net: use __packed annotationEric Dumazet2010-06-031-2/+2
|/ | | | | | | | | cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* wl1271: Fix 32 bit register read related endiannes bugJuuso Oikarinen2010-05-071-1/+1
| | | | | | | | | | Reading single registers did not pay attention to data endianness. This patch fix that. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Add sysfs file to retrieve HW PG-version and ROM-versionJuuso Oikarinen2010-05-071-0/+2
| | | | | | | | | | This patch reads the HW PG version (along with a ROM-version, embedded in the same value) from the wl1271 hardware and publishes the value in a sysfs -file. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Add support for connection quality monitoringJuuso Oikarinen2010-04-091-0/+3
| | | | | | | | | | | This patch will add support for connection quality monitoring by configuring rssi triggers to the firmware, and enabling the firmware rssi trigger functionality. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Go to ELP in idleJuuso Oikarinen2010-04-091-0/+1
| | | | | | | | | | Allow the wl1271 go to ELP mode also in idle. This will reduce current consumption remarkably in idle mode (~12mA -> ~0.2mA) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Use minimum rate for each band for control messagesJuuso Oikarinen2010-04-061-0/+1
| | | | | | | | | | | Currently the mac80211 is not telling a hardware rate controlled driver a rate to use for association frames etc. So to be safe, use the lowest rate of each band for communication. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Update beacon interval properly for ad-hocJuuso Oikarinen2010-03-311-0/+3
| | | | | | | | | | Configure the hardware beacon interval to whatever requested by the mac80211. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Fix ad-hoc mode handlingJuuso Oikarinen2010-03-311-0/+2
| | | | | | | | | | Fix the driver to better reflect the ad-hoc related configuration from the mac80211. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Update busyword checking mechanismJuuso Oikarinen2010-03-311-8/+1
| | | | | | | | | | | | | | | | | After the busy-words, if the firmware did not complete by the end of the first (fixed) busy-word, a flip of the CS line is required to enable clocking out the actual read data. This patch changes the mechanism such that the CS line is flipped after each busyword. Also, the busy-word mechanism is finally enabled, and the number of fixed busywords reduced to the minimum. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Changed platform_device to be dynamically allocatedTeemu Paasikivi2010-03-231-0/+1
| | | | | | | | | | | | Changed platform_device to be allocated dynamically from the wl1271_alloc_hw function. Also cleaned up error handling in the wl1271_alloc_hw function and module probe functions. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Update filters properlyJuuso Oikarinen2010-03-231-0/+2
| | | | | | | | | This patch adds support for the filters configured by the mac80211 stack. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Added DEBUG_SDIO flagTeemu Paasikivi2010-03-231-0/+1
| | | | | | | | | | | Added separate flag for SDIO debugging. Previously it has used DEBUG_SPI flag. This patch also includes couple indentation fixes. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Add sysfs file to control BT co-ex stateJuuso Oikarinen2010-03-231-0/+2
| | | | | | | | | | Add a sysfs file to control the state of the BT co-ex (enable or disable it.) By default, the BT co-ex is enabled. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Cleaned up wlan power on/off functionsTeemu Paasikivi2010-03-231-0/+1
| | | | | | | | | | | Added method for wlan power control to io_ops struct and moved wl1271_power_on and wl1271_power_off functions to wl1271_io.h. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Clean up TX security sequence number handlingJuuso Oikarinen2010-03-091-2/+4
| | | | | | | | | Instead of managing the TX security sequence number as two variables, use one 64 bit variable. This greatly simplifies the handling of the number. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Update TX packet life time handling with higher resolution timeJuuso Oikarinen2010-03-091-1/+1
| | | | | | | | | | This patch uses a higher precision timer to synchronize with the firmware clock. Improved precision is needed as on some platforms a jiffy may be up to tens of milliseconds, and the required precision is closer to TU's. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Implement looped IRQ handlingJuuso Oikarinen2010-03-091-0/+2
| | | | | | | | | | | This patch implements looped IRQ handling. In essence, if a new interrupt is asserted by the FW while the host is processing the previous one, the host will directly proceed processing the new IRQ without leaving the handling function. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Fix queue stopping/waking for TX pathJuuso Oikarinen2010-03-091-1/+2
| | | | | | | | | | The queue stopping/waking functionality was broken in a way that could cause huge latencies in TX transfers and even cause the TX to stall in the right circumstances. Correct these problems. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Improvements to the TX pathJuuso Oikarinen2010-03-091-2/+2
| | | | | | | | | | | | - Fix a TX result overflow problem that was present in the TX path and visible with at least linksys AP's (probably any AP with high throughput capability.) - Optimize TX by writing FW trigger for a group of TX frames instead of each and every frame. - Slightly optimize the TX path code. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Implemented abstraction of IO functions.Teemu Paasikivi2010-03-091-1/+15
| | | | | | | | | | Changed the driver to use if_ops structure to abstract access to the IO layer (SPI or SDIO). Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: add testmode supportKalle Valo2010-02-191-1/+1
| | | | | | | | | | Testmode will be used to send PLT (Production Line Testing) commands from user space. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Use NVS INI file configurationJuuso Oikarinen2010-02-191-3/+29
| | | | | | | | | | Replace the hardcoded general and radio parameter configuration in the driver with configuration taken from the NVS file directly. Also remove the driver dependency to the structures with the parameter data. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Change booleans in struct wl1271 into a flags bitmaskJuuso Oikarinen2009-12-281-16/+7
| | | | | | | | | | For cleaner implementation, change the bunch of booleans in the struct wl1271 structure into a flags bitmask. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Fix supported rate managementJuuso Oikarinen2009-12-281-1/+6
| | | | | | | | | | | Previously, only basic rates were used for data transmission - resulting in reduced transfer rates. This patch takes enables the firmware to take advantage of the full set of data rates supported by the AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Add pre-power-on sleepJuuso Oikarinen2009-12-281-1/+3
| | | | | | | | | | | This patch adds a short delay before powering on the wl1271. Normally, it is not needed, but if the wl1271 has been powered off shortly before, for reliable firmware-booting this small stabilization delay is required. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: prevent power save entry while not associatedJuuso Oikarinen2009-12-281-0/+1
| | | | | | | | | | | The mac80211 sometimes requests power save entry while not associated - this will cause problems, so prevent it if not associated. Go to powersave once association is complete. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Use slow rates for association messagesJuuso Oikarinen2009-12-281-2/+0
| | | | | | | | | | | While not associated, default the data rates to 1 and 2mbps, so that only those rates will be used for association related message transfer. Once associated, configure the full rate-set supported by the AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: upload only the first 468 bytes from the NVS fileLuciano Coelho2009-12-281-0/+1
| | | | | | | | | | We were uploading the whole NVS file, but that is wrong, because the same file also contains the initialization values. For the latest firmwares, we should upload only the initial 468 bytes from the file. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
View Lorry Controller Status