summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_attr.c
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] qla2xxx: Return sysfs error codes appropriate to conditions.Joe Carnuccio2011-08-291-30/+29
| | | | | | | | | | Return sysfs error codes that match the conditions encountered. This prevents sysfs from retrying a request which is conditioned to fail under the current circumstance. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla2xxx: Correction to sysfs edc interface.Joe Carnuccio2011-08-291-3/+3
| | | | | | | | | | | Corrects the return value for the cases where read/write edc fails; this prevents sysfs from retrying the operation until forever. Corrects the printk width specifier for the first byte of buf. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla2xxx: Add support for ISP82xx to capture dump (minidump) on failure.Giridhar Malavali2011-08-291-8/+42
| | | | | | | | | | | Minidump allows us to catpure a snapshot of the firmware/hardware states at the time of failure for further analysis. [jejb: added missing #include <linux/vmalloc.h> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> ] Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla2xxx: T10 DIF - Fix incorrect error reporting.Arun Easi2011-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | | This fix: - Disables app tag peeking; correct tag check will be added when the SCSI API is available. - Always derive ref_tag from scsi_get_lba() - Removes incorrect swap of FCP_LUN in FCP_CMND - Moves app-tag error check before ref-tag check. The reason being, currently there is no interface in SCSI to retrieve the app-tag for protection I/Os, so driver puts zero for app-tag in the firmware interface, but requests not to validate it, but when a ref-tag error is detected by firmware, it would put expected/actual tags for all the protection tags (guard/app/ref). As driver checks for app tag error first, a ref-tag error is incorrectly flagged as app-tag error. - Convert HBA specific checks to capability based. Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla2xxx: T10 DIF - Handle uninitalized sectors.Arun Easi2011-08-271-1/+4
| | | | | | | | | | Driver needs to update protection bytes for uninitialized sectors as they are not DMA-d. Signed-off-by: Arun Easi <arun.easi@qlogic.com> Reviewed-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla2xxx: Code changes to support new dynamic logging infrastructure.Saurav Kashyap2011-07-271-86/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | The code is changed to support the new dynamic logging infrastructure. Following are the levels added. Default is 0 - no logging. 0x40000000 - Module Init & Probe. 0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery. 0x08000000 - IO tracing. 0x04000000 - DPC Thread. 0x02000000 - Async events. 0x01000000 - Timer routines. 0x00800000 - User space. 0x00400000 - Task Management. 0x00200000 - AER/EEH. 0x00100000 - Multi Q. 0x00080000 - P3P Specific. 0x00040000 - Virtual Port. 0x00020000 - Buffer Dump. 0x00010000 - Misc. 0x7fffffff - For enabling all logs, can be too many logs. Setting ql2xextended_error_logging module parameter to any of the above value, will enable the debug for that particular level. Do LOGICAL OR of the value to enable more than one level. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] qla2xxx: Unify the read/write sfp mailbox command routines.Joe Carnuccio2011-05-171-6/+6
| | | | | | | | | | Make the read/write sfp mailbox command routines uniform, and remove redundancy. Also protect against attempting to do a single byte dma in these routines. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Correct buffer start in edc sysfs debug print.Joe Carnuccio2011-05-171-1/+1
| | | | | | | | | The debug print prints the first byte of the buffer which is buf[8]. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Fix vport delete hang when logins are outstanding.Arun Easi2011-05-171-2/+3
| | | | | | | | | | Timer is required to flush out entries that may be present in work queues. Cc: stable@kernel.org Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Log fcport state transitions when debug messages are enabled.Chad Dupuis2011-05-011-1/+1
| | | | | | | | | | Add the inline function qla2x00_set_port_state() so that when a fcport state transition happens we can log the state transition if debug messages are enabled. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Update copyright banner.Andrew Vasquez2011-05-011-1/+1
| | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Change from irq to irqsave with host_lockMadhuranath Iyengar2011-02-121-2/+3
| | | | | | | Make the driver safer by using irqsave/irqrestore with host_lock. Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Add sysfs node for displaying board temperature.Andrew Vasquez2010-12-231-0/+27
| | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Avoid depending on SCSI host_lock in queuecommand function.Giridhar Malavali2010-10-251-4/+4
| | | | | | Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Remove port down retry count.Chad Dupuis2010-10-251-0/+4
| | | | | | | | | | | | This patch removes the use of the port down retry counter as a mechanism to update a fcport state. The internal driver counter is a residual carry-over from pre-FC-transport aware driver inteaction. The ql2xport_down_retry module parameter and NVRAM set ha->port_down_retry_count remain in order to seed the fc-host's default dev-loss-tmo. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2010-10-221-14/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (84 commits) [SCSI] be2iscsi: SGE Len == 64K [SCSI] be2iscsi: Remove premature free of cid [SCSI] be2iscsi: More time for FW [SCSI] libsas: fix bug for vacant phy [SCSI] sd: Fix overflow with big physical blocks [SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer [SCSI] libsas: Don't issue commands to devices that have been hot-removed [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive [SCSI] lpfc 8.3.17: Update lpfc driver version to 8.3.17 [SCSI] lpfc 8.3.17: Replace function reset methodology [SCSI] lpfc 8.3.17: SCSI fixes [SCSI] lpfc 8.3.17: BSG fixes [SCSI] lpfc 8.3.17: SLI Additions and Fixes [SCSI] lpfc 8.3.17: Code Cleanup and Locking fixes [SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces [SCSI] ipr: fix array error logging [SCSI] aha152x: enable PCMCIA on 64bit [SCSI] scsi_dh_alua: Handle all states correctly [SCSI] cxgb4i: connection and ddp setting update [SCSI] cxgb3i: fixed connection over vlan ...
| * [SCSI] qla2xxx: prep for fc host dev loss tmo supportMike Christie2010-10-071-11/+2
| | | | | | | | | | | | | | | | | | | | | | This removes the driver's get_host_def_dev_loss_tmo callback and just has the driver set the dev loss using the fc class fc_host_dev_loss_tmo macro like is done for other fc params. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] qla2xxx: Clear local references of rport on device loss timeout ↵Giridhar Malavali2010-09-051-9/+9
| | | | | | | | | | | | | | | | | | | | | | notification from FC transport. The clearing of local references to rport was blocked when abort is active. This code clears the local references unconditionaly upon device loss timeout callback from FC transport. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] qla2xxx: Return proper fabric name based on device state.Giridhar Malavali2010-09-051-5/+5
| | | | | | | | | | Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] qla2xxx: do not reset dev_loss_tmo in slave calloutMike Christie2010-09-051-0/+11
| | | | | | | | | | | | | | | | | | This fixes a bug where the driver was resetting the rport dev_loss_tmo when devices were added by adding support for the get_host_def_dev_loss_tmo callout. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | [SCSI] qla2xxx: Fix vport delete issuesArun Easi2010-09-051-8/+15
|/ | | | | Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: T10 DIF Type 2 supportArun Easi2010-07-281-0/+2
| | | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Update copyright banner.Giridhar Malavali2010-07-281-1/+1
| | | | | Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Add qla2x00_free_fcports() functionChad Dupuis2010-07-281-6/+1
| | | | | | | | | | This function was added to encapsulate freeing the memory for all the fcports associated with a particular vha. Also added a call to qla2x00_free_fcports() to qla2x00_free_device() to free the memory for all the fcports associated with a vha during device removal. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Check for golden firmware and show version if availableMadhuranath Iyengar2010-07-281-0/+18
| | | | | Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Removed redundant check for ISP 84xx.Giridhar Malavali2010-07-271-1/+1
| | | | | Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: T10 DIF enablement for 81XXArun Easi2010-07-271-1/+1
| | | | | Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* sysfs: add struct file* to bin_attr callbacksChris Wright2010-05-211-16/+16
| | | | | | | | | This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are ↵Lalit Chandivade2010-05-161-0/+6
| | | | | | | | | | | | | | | | | | | | mutually exclusive The problem occurring is a hw-race where there's an outstanding read-flash operation occurring while the chip is being reset (done via an sg_reset script). After the chip is paused, the read-flash operation never completes and the DPC thread, while trying to complete the reset, is never able to recover, as the HW appears to be hung... The fix is to wait for outstanding flash operation prior to doing a sg_reset -h. And to wait for reset to complete before any flash operations. Note, during the wait, if any of the operation (reset/flash) does not complete, failure is returned to the upper layer. The upper layer either need to fail or retry. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: T10 DIF support added.Arun Easi2010-05-161-0/+16
| | | | | | Signed-off-by: Duane Grigsby <duane.grigsby@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Display proper link state for disconnected ports.Andrew Vasquez2010-05-161-1/+2
| | | | | | | | | With qla2xxx using mid-layer async-scsi-scanning, the link state for disconnected port is displayed wrong. Additional check for cable presence is considered to display proper link state. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Check for ISP84xx before processing to get 84xx firmware ↵Andrew Vasquez2010-05-161-3/+5
| | | | | | | version. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Add ISP82XX support.Giridhar Malavali2010-05-011-7/+28
| | | | | | | Enhanced the driver to support new FCoE host bus adapter. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: General checkpatch corrections.Andrew Vasquez2010-04-111-4/+2
| | | | | Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Re-organized BSG interface specific code.Giridhar Malavali2010-04-111-701/+1
| | | | | | | | | | | | | | | 1. Segregate BSG interface specific code to new files. 2. Handle multiple vendor specific commands indepedently. 3. Reorganised support for reset, management and update FCoE firmware commands. 4. Fixed memory leak issue in Loopback. 5. Added new vendor command to support iiDMA using BSG interface. 6. Proper cleanup of dma mapped and dma allocated buffers for BSG request. [jejb: fix up conflict and merge in Jiri Slaby lock imbalance patch] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: fix lock imbalanceJiri Slaby2010-04-081-0/+1
| | | | | | | | | Stanse found that one error path in qla24xx_bsg_timeout omits to unlock ha->hardware_lock. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2010-04-051-1/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla1280: retain firmware for error recovery [SCSI] attirbute_container: Initialize sysfs attributes with sysfs_attr_init [SCSI] advansys: fix regression with request_firmware change [SCSI] qla2xxx: Updated version number to 8.03.02-k2. [SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset. [SCSI] qla2xxx: Disable MSI on qla24xx chips other than QLA2432. [SCSI] qla2xxx: Check to make sure multique and CPU affinity support is not enabled at the same time. [SCSI] qla2xxx: Correct vp_idx checking during PORT_UPDATE processing. [SCSI] qla2xxx: Honour "Extended BB credits" bit for CNAs. [SCSI] scsi_transport_fc: Make sure commands are completed when rport is offline [SCSI] libiscsi: Fix recovery slowdown regression
| * [SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset.Santosh Vernekar2010-03-271-1/+5
| | | | | | | | | | | | | | | | The fix prevents application path from sending get-firmware-state mbx command during as isp reset. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* [SCSI] qla2xxx: Correct use-after-free issue in terminate_rport_io callback.Andrew Vasquez2010-02-191-2/+0
| | | | | | | | | | | | | | | The explicit logout (LOGO) issued at the end of the callback will flush (via normal scsi_cmnd->done()) any outstanding commands (FCP2) the firmware is holding. While iterating through the outstanding_cmnd array in qla2x00_abort_fcport_cmds(), locking and unlocking of the hardware spinlock, opens-up the driver to cases where the processed SRB (sp) could be used after the command completed from interrupt context. Cc: stable@kernel.org Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Proper clean-up of BSG requests when request times out.Giridhar Malavali2010-02-191-71/+54
| | | | | | | | | Fix for BSG request cleanup when the request timesout. Proper release of driver resources used for BSG request during timeout cleanup. Cc: stable@kernel.org Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Initialize payload receive length in failure path of vendor ↵Sarang Radke2010-02-191-0/+1
| | | | | | | | | | | | commands Since bsg_job->reply->reply_payload_rcv_len is uninitialized in case of failure, fc-transport triggers a warning for each command failed. Cc: stable@kernel.org Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Add BSG support for FC ELS/CT passthrough and vendor commands.Giridhar Malavali2010-01-181-1/+745
| | | | | | | [jejb: fixed printk casting issues] Signed-off-by: Sarang Radke <sarang.radke@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Extend base EEH support in qla2xxx.Andrew Vasquez2009-12-301-5/+27
| | | | | Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] scsi_lib_dma: fix bug with dma maps on nested scsi objectsJames Bottomley2009-12-041-1/+2
| | | | | | | | | | | | | | Some of our virtual SCSI hosts don't have a proper bus parent at the top, which can be a problem for doing DMA on them This patch makes the host device cache a pointer to the physical bus device and provides an extra API for setting it (the normal API picks it up from the parent). This patch also modifies the qla2xxx and lpfc vport logic to use the new DMA host setting API. Acked-By: James Smart <james.smart@emulex.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Correct various NPIV issues.Andrew Vasquez2009-09-121-0/+5
| | | | | | | | | | | * Consolidate vport-count processing. * Correct vp_idx restrictions during RSCN processing. * Push topology verification check to qla2x00_do_dpc_all_vps(). * Don't skip vport full-login-lip/lip-reset mailbox handling. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Fix to ensure driver works in sinlge queue mode if ↵Anirban Chakraborty2009-08-221-2/+2
| | | | | | | | | | | | multiqueue fails When the multiqueue mode fails to work, the driver falls back on single queue mode. This ensures that the firmware is reinitialized with single queue options and all the resources are readjusted accordingly. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] qla2xxx: Export additional firmware-states for application support.Andrew Vasquez2009-06-081-0/+18
| | | | | Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Avoid explicit LOGO during driver host tear-down.Andrew Vasquez2009-06-081-1/+2
| | | | | | | | As firmware will ultimately terminate (stop) and port states-cleared. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] qla2xxx: Correct NULL pointer bug in cpu affinity mode.Anirban Chakraborty2009-06-081-5/+10
| | | | | | | | This patch fixes a NULL pointer bug that occurs when IO is being carried out on a vport for which the cpu affinity mode is turned on. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
View Lorry Controller Status