diff options
Diffstat (limited to 'include/linux/isdnif.h')
| -rw-r--r-- | include/linux/isdnif.h | 505 |
1 files changed, 0 insertions, 505 deletions
diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h deleted file mode 100644 index 8d80fdc68647..000000000000 --- a/include/linux/isdnif.h +++ /dev/null @@ -1,505 +0,0 @@ -/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $ - * - * Linux ISDN subsystem - * Definition of the interface between the subsystem and its low-level drivers. - * - * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ -#ifndef __ISDNIF_H__ -#define __ISDNIF_H__ - - -#include <linux/skbuff.h> -#include <uapi/linux/isdnif.h> - -/***************************************************************************/ -/* Extensions made by Werner Cornelius (werner@ikt.de) */ -/* */ -/* The proceed command holds a incoming call in a state to leave processes */ -/* enough time to check whether ist should be accepted. */ -/* The PROT_IO Command extends the interface to make protocol dependent */ -/* features available (call diversion, call waiting...). */ -/* */ -/* The PROT_IO Command is executed with the desired driver id and the arg */ -/* parameter coded as follows: */ -/* The lower 8 bits of arg contain the desired protocol from ISDN_PTYPE */ -/* definitions. The upper 24 bits represent the protocol specific cmd/stat.*/ -/* Any additional data is protocol and command specific. */ -/* This mechanism also applies to the statcallb callback STAT_PROT. */ -/* */ -/* This suggested extension permits an easy expansion of protocol specific */ -/* handling. Extensions may be added at any time without changing the HL */ -/* driver code and not getting conflicts without certifications. */ -/* The well known CAPI 2.0 interface handles such extensions in a similar */ -/* way. Perhaps a protocol specific module may be added and separately */ -/* loaded and linked to the basic isdn module for handling. */ -/***************************************************************************/ - -/*****************/ -/* DSS1 commands */ -/*****************/ -#define DSS1_CMD_INVOKE ((0x00 << 8) | ISDN_PTYPE_EURO) /* invoke a supplementary service */ -#define DSS1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_EURO) /* abort a invoke cmd */ - -/*******************************/ -/* DSS1 Status callback values */ -/*******************************/ -#define DSS1_STAT_INVOKE_RES ((0x80 << 8) | ISDN_PTYPE_EURO) /* Result for invocation */ -#define DSS1_STAT_INVOKE_ERR ((0x81 << 8) | ISDN_PTYPE_EURO) /* Error Return for invocation */ -#define DSS1_STAT_INVOKE_BRD ((0x82 << 8) | ISDN_PTYPE_EURO) /* Deliver invoke broadcast info */ - - -/*********************************************************************/ -/* structures for DSS1 commands and callback */ -/* */ -/* An action is invoked by sending a DSS1_CMD_INVOKE. The ll_id, proc*/ -/* timeout, datalen and data fields must be set before calling. */ -/* */ -/* The return value is a positive hl_id value also delivered in the */ -/* hl_id field. A value of zero signals no more left hl_id capacitys.*/ -/* A negative return value signals errors in LL. So if the return */ -/* value is <= 0 no action in LL will be taken -> request ignored */ -/* */ -/* The timeout field must be filled with a positive value specifying */ -/* the amount of time the INVOKED process waits for a reaction from */ -/* the network. */ -/* If a response (either error or result) is received during this */ -/* intervall, a reporting callback is initiated and the process will */ -/* be deleted, the hl identifier will be freed. */ -/* If no response is received during the specified intervall, a error*/ -/* callback is initiated with timeout set to -1 and a datalen set */ -/* to 0. */ -/* If timeout is set to a value <= 0 during INVOCATION the process is*/ -/* immediately deleted after sending the data. No callback occurs ! */ -/* */ -/* A currently waiting process may be aborted with INVOKE_ABORT. No */ -/* callback will occur when a process has been aborted. */ -/* */ -/* Broadcast invoke frames from the network are reported via the */ -/* STAT_INVOKE_BRD callback. The ll_id is set to 0, the other fields */ -/* are supplied by the network and not by the HL. */ -/*********************************************************************/ - -/*****************/ -/* NI1 commands */ -/*****************/ -#define NI1_CMD_INVOKE ((0x00 << 8) | ISDN_PTYPE_NI1) /* invoke a supplementary service */ -#define NI1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_NI1) /* abort a invoke cmd */ - -/*******************************/ -/* NI1 Status callback values */ -/*******************************/ -#define NI1_STAT_INVOKE_RES ((0x80 << 8) | ISDN_PTYPE_NI1) /* Result for invocation */ -#define NI1_STAT_INVOKE_ERR ((0x81 << 8) | ISDN_PTYPE_NI1) /* Error Return for invocation */ -#define NI1_STAT_INVOKE_BRD ((0x82 << 8) | ISDN_PTYPE_NI1) /* Deliver invoke broadcast info */ - -typedef struct - { ulong ll_id; /* ID supplied by LL when executing */ - /* a command and returned by HL for */ - /* INVOKE_RES and INVOKE_ERR */ - int hl_id; /* ID supplied by HL when called */ - /* for executing a cmd and delivered */ - /* for results and errors */ - /* must be supplied by LL when aborting*/ - int proc; /* invoke procedure used by CMD_INVOKE */ - /* returned by callback and broadcast */ - int timeout; /* timeout for INVOKE CMD in ms */ - /* -1 in stat callback when timed out */ - /* error value when error callback */ - int datalen; /* length of cmd or stat data */ - u_char *data;/* pointer to data delivered or send */ - } isdn_cmd_stat; - -/* - * Commands from linklevel to lowlevel - * - */ -#define ISDN_CMD_IOCTL 0 /* Perform ioctl */ -#define ISDN_CMD_DIAL 1 /* Dial out */ -#define ISDN_CMD_ACCEPTD 2 /* Accept an incoming call on D-Chan. */ -#define ISDN_CMD_ACCEPTB 3 /* Request B-Channel connect. */ -#define ISDN_CMD_HANGUP 4 /* Hangup */ -#define ISDN_CMD_CLREAZ 5 /* Clear EAZ(s) of channel */ -#define ISDN_CMD_SETEAZ 6 /* Set EAZ(s) of channel */ -#define ISDN_CMD_GETEAZ 7 /* Get EAZ(s) of channel */ -#define ISDN_CMD_SETSIL 8 /* Set Service-Indicator-List of channel */ -#define ISDN_CMD_GETSIL 9 /* Get Service-Indicator-List of channel */ -#define ISDN_CMD_SETL2 10 /* Set B-Chan. Layer2-Parameter */ -#define ISDN_CMD_GETL2 11 /* Get B-Chan. Layer2-Parameter */ -#define ISDN_CMD_SETL3 12 /* Set B-Chan. Layer3-Parameter */ -#define ISDN_CMD_GETL3 13 /* Get B-Chan. Layer3-Parameter */ -// #define ISDN_CMD_LOCK 14 /* Signal usage by upper levels */ -// #define ISDN_CMD_UNLOCK 15 /* Release usage-lock */ -#define ISDN_CMD_SUSPEND 16 /* Suspend connection */ -#define ISDN_CMD_RESUME 17 /* Resume connection */ -#define ISDN_CMD_PROCEED 18 /* Proceed with call establishment */ -#define ISDN_CMD_ALERT 19 /* Alert after Proceeding */ -#define ISDN_CMD_REDIR 20 /* Redir a incoming call */ -#define ISDN_CMD_PROT_IO 21 /* Protocol specific commands */ -#define CAPI_PUT_MESSAGE 22 /* CAPI message send down or up */ -#define ISDN_CMD_FAXCMD 23 /* FAX commands to HL-driver */ -#define ISDN_CMD_AUDIO 24 /* DSP, DTMF, ... settings */ - -/* - * Status-Values delivered from lowlevel to linklevel via - * statcallb(). - * - */ -#define ISDN_STAT_STAVAIL 256 /* Raw status-data available */ -#define ISDN_STAT_ICALL 257 /* Incoming call detected */ -#define ISDN_STAT_RUN 258 /* Signal protocol-code is running */ -#define ISDN_STAT_STOP 259 /* Signal halt of protocol-code */ -#define ISDN_STAT_DCONN 260 /* Signal D-Channel connect */ -#define ISDN_STAT_BCONN 261 /* Signal B-Channel connect */ -#define ISDN_STAT_DHUP 262 /* Signal D-Channel disconnect */ -#define ISDN_STAT_BHUP 263 /* Signal B-Channel disconnect */ -#define ISDN_STAT_CINF 264 /* Charge-Info */ -#define ISDN_STAT_LOAD 265 /* Signal new lowlevel-driver is loaded */ -#define ISDN_STAT_UNLOAD 266 /* Signal unload of lowlevel-driver */ -#define ISDN_STAT_BSENT 267 /* Signal packet sent */ -#define ISDN_STAT_NODCH 268 /* Signal no D-Channel */ -#define ISDN_STAT_ADDCH 269 /* Add more Channels */ -#define ISDN_STAT_CAUSE 270 /* Cause-Message */ -#define ISDN_STAT_ICALLW 271 /* Incoming call without B-chan waiting */ -#define ISDN_STAT_REDIR 272 /* Redir result */ -#define ISDN_STAT_PROT 273 /* protocol IO specific callback */ -#define ISDN_STAT_DISPLAY 274 /* deliver a received display message */ -#define ISDN_STAT_L1ERR 275 /* Signal Layer-1 Error */ -#define ISDN_STAT_FAXIND 276 /* FAX indications from HL-driver */ -#define ISDN_STAT_AUDIO 277 /* DTMF, DSP indications */ -#define ISDN_STAT_DISCH 278 /* Disable/Enable channel usage */ - -/* - * Audio commands - */ -#define ISDN_AUDIO_SETDD 0 /* Set DTMF detection */ -#define ISDN_AUDIO_DTMF 1 /* Rx/Tx DTMF */ - -/* - * Values for errcode field - */ -#define ISDN_STAT_L1ERR_SEND 1 -#define ISDN_STAT_L1ERR_RECV 2 - -/* - * Values for feature-field of interface-struct. - */ -/* Layer 2 */ -#define ISDN_FEATURE_L2_X75I (0x0001 << ISDN_PROTO_L2_X75I) -#define ISDN_FEATURE_L2_X75UI (0x0001 << ISDN_PROTO_L2_X75UI) -#define ISDN_FEATURE_L2_X75BUI (0x0001 << ISDN_PROTO_L2_X75BUI) -#define ISDN_FEATURE_L2_HDLC (0x0001 << ISDN_PROTO_L2_HDLC) -#define ISDN_FEATURE_L2_TRANS (0x0001 << ISDN_PROTO_L2_TRANS) -#define ISDN_FEATURE_L2_X25DTE (0x0001 << ISDN_PROTO_L2_X25DTE) -#define ISDN_FEATURE_L2_X25DCE (0x0001 << ISDN_PROTO_L2_X25DCE) -#define ISDN_FEATURE_L2_V11096 (0x0001 << ISDN_PROTO_L2_V11096) -#define ISDN_FEATURE_L2_V11019 (0x0001 << ISDN_PROTO_L2_V11019) -#define ISDN_FEATURE_L2_V11038 (0x0001 << ISDN_PROTO_L2_V11038) -#define ISDN_FEATURE_L2_MODEM (0x0001 << ISDN_PROTO_L2_MODEM) -#define ISDN_FEATURE_L2_FAX (0x0001 << ISDN_PROTO_L2_FAX) -#define ISDN_FEATURE_L2_HDLC_56K (0x0001 << ISDN_PROTO_L2_HDLC_56K) - -#define ISDN_FEATURE_L2_MASK (0x0FFFF) /* Max. 16 protocols */ -#define ISDN_FEATURE_L2_SHIFT (0) - -/* Layer 3 */ -#define ISDN_FEATURE_L3_TRANS (0x10000 << ISDN_PROTO_L3_TRANS) -#define ISDN_FEATURE_L3_TRANSDSP (0x10000 << ISDN_PROTO_L3_TRANSDSP) -#define ISDN_FEATURE_L3_FCLASS2 (0x10000 << ISDN_PROTO_L3_FCLASS2) -#define ISDN_FEATURE_L3_FCLASS1 (0x10000 << ISDN_PROTO_L3_FCLASS1) - -#define ISDN_FEATURE_L3_MASK (0x0FF0000) /* Max. 8 Protocols */ -#define ISDN_FEATURE_L3_SHIFT (16) - -/* Signaling */ -#define ISDN_FEATURE_P_UNKNOWN (0x1000000 << ISDN_PTYPE_UNKNOWN) -#define ISDN_FEATURE_P_1TR6 (0x1000000 << ISDN_PTYPE_1TR6) -#define ISDN_FEATURE_P_EURO (0x1000000 << ISDN_PTYPE_EURO) -#define ISDN_FEATURE_P_NI1 (0x1000000 << ISDN_PTYPE_NI1) - -#define ISDN_FEATURE_P_MASK (0x0FF000000) /* Max. 8 Protocols */ -#define ISDN_FEATURE_P_SHIFT (24) - -typedef struct setup_parm { - unsigned char phone[32]; /* Remote Phone-Number */ - unsigned char eazmsn[32]; /* Local EAZ or MSN */ - unsigned char si1; /* Service Indicator 1 */ - unsigned char si2; /* Service Indicator 2 */ - unsigned char plan; /* Numbering plan */ - unsigned char screen; /* Screening info */ -} setup_parm; - - -#ifdef CONFIG_ISDN_TTY_FAX -/* T.30 Fax G3 */ - -#define FAXIDLEN 21 - -typedef struct T30_s { - /* session parameters */ - __u8 resolution; - __u8 rate; - __u8 width; - __u8 length; - __u8 compression; - __u8 ecm; - __u8 binary; - __u8 scantime; - __u8 id[FAXIDLEN]; - /* additional parameters */ - __u8 phase; - __u8 direction; - __u8 code; - __u8 badlin; - __u8 badmul; - __u8 bor; - __u8 fet; - __u8 pollid[FAXIDLEN]; - __u8 cq; - __u8 cr; - __u8 ctcrty; - __u8 minsp; - __u8 phcto; - __u8 rel; - __u8 nbc; - /* remote station parameters */ - __u8 r_resolution; - __u8 r_rate; - __u8 r_width; - __u8 r_length; - __u8 r_compression; - __u8 r_ecm; - __u8 r_binary; - __u8 r_scantime; - __u8 r_id[FAXIDLEN]; - __u8 r_code; -} __packed T30_s; - -#define ISDN_TTY_FAX_CONN_IN 0 -#define ISDN_TTY_FAX_CONN_OUT 1 - -#define ISDN_TTY_FAX_FCON 0 -#define ISDN_TTY_FAX_DIS 1 -#define ISDN_TTY_FAX_FTT 2 -#define ISDN_TTY_FAX_MCF 3 -#define ISDN_TTY_FAX_DCS 4 -#define ISDN_TTY_FAX_TRAIN_OK 5 -#define ISDN_TTY_FAX_EOP 6 -#define ISDN_TTY_FAX_EOM 7 -#define ISDN_TTY_FAX_MPS 8 -#define ISDN_TTY_FAX_DTC 9 -#define ISDN_TTY_FAX_RID 10 -#define ISDN_TTY_FAX_HNG 11 -#define ISDN_TTY_FAX_DT 12 -#define ISDN_TTY_FAX_FCON_I 13 -#define ISDN_TTY_FAX_DR 14 -#define ISDN_TTY_FAX_ET 15 -#define ISDN_TTY_FAX_CFR 16 -#define ISDN_TTY_FAX_PTS 17 -#define ISDN_TTY_FAX_SENT 18 - -#define ISDN_FAX_PHASE_IDLE 0 -#define ISDN_FAX_PHASE_A 1 -#define ISDN_FAX_PHASE_B 2 -#define ISDN_FAX_PHASE_C 3 -#define ISDN_FAX_PHASE_D 4 -#define ISDN_FAX_PHASE_E 5 - -#endif /* TTY_FAX */ - -#define ISDN_FAX_CLASS1_FAE 0 -#define ISDN_FAX_CLASS1_FTS 1 -#define ISDN_FAX_CLASS1_FRS 2 -#define ISDN_FAX_CLASS1_FTM 3 -#define ISDN_FAX_CLASS1_FRM 4 -#define ISDN_FAX_CLASS1_FTH 5 -#define ISDN_FAX_CLASS1_FRH 6 -#define ISDN_FAX_CLASS1_CTRL 7 - -#define ISDN_FAX_CLASS1_OK 0 -#define ISDN_FAX_CLASS1_CONNECT 1 -#define ISDN_FAX_CLASS1_NOCARR 2 -#define ISDN_FAX_CLASS1_ERROR 3 -#define ISDN_FAX_CLASS1_FCERROR 4 -#define ISDN_FAX_CLASS1_QUERY 5 - -typedef struct { - __u8 cmd; - __u8 subcmd; - __u8 para[50]; -} aux_s; - -#define AT_COMMAND 0 -#define AT_EQ_VALUE 1 -#define AT_QUERY 2 -#define AT_EQ_QUERY 3 - -/* CAPI structs */ - -/* this is compatible to the old union size */ -#define MAX_CAPI_PARA_LEN 50 - -typedef struct { - /* Header */ - __u16 Length; - __u16 ApplId; - __u8 Command; - __u8 Subcommand; - __u16 Messagenumber; - - /* Parameter */ - union { - __u32 Controller; - __u32 PLCI; - __u32 NCCI; - } adr; - __u8 para[MAX_CAPI_PARA_LEN]; -} capi_msg; - -/* - * Structure for exchanging above infos - * - */ -typedef struct { - int driver; /* Lowlevel-Driver-ID */ - int command; /* Command or Status (see above) */ - ulong arg; /* Additional Data */ - union { - ulong errcode; /* Type of error with STAT_L1ERR */ - int length; /* Amount of bytes sent with STAT_BSENT */ - u_char num[50]; /* Additional Data */ - setup_parm setup;/* For SETUP msg */ - capi_msg cmsg; /* For CAPI like messages */ - char display[85];/* display message data */ - isdn_cmd_stat isdn_io; /* ISDN IO-parameter/result */ - aux_s aux; /* for modem commands/indications */ -#ifdef CONFIG_ISDN_TTY_FAX - T30_s *fax; /* Pointer to ttys fax struct */ -#endif - ulong userdata; /* User Data */ - } parm; -} isdn_ctrl; - -#define dss1_io isdn_io -#define ni1_io isdn_io - -/* - * The interface-struct itself (initialized at load-time of lowlevel-driver) - * - * See Documentation/isdn/INTERFACE for a description, how the communication - * between the ISDN subsystem and its drivers is done. - * - */ -typedef struct { - struct module *owner; - - /* Number of channels supported by this driver - */ - int channels; - - /* - * Maximum Size of transmit/receive-buffer this driver supports. - */ - int maxbufsize; - - /* Feature-Flags for this driver. - * See defines ISDN_FEATURE_... for Values - */ - unsigned long features; - - /* - * Needed for calculating - * dev->hard_header_len = linklayer header + hl_hdrlen; - * Drivers, not supporting sk_buff's should set this to 0. - */ - unsigned short hl_hdrlen; - - /* - * Receive-Callback using sk_buff's - * Parameters: - * int Driver-ID - * int local channel-number (0 ...) - * struct sk_buff *skb received Data - */ - void (*rcvcallb_skb)(int, int, struct sk_buff *); - - /* Status-Callback - * Parameters: - * isdn_ctrl* - * driver = Driver ID. - * command = One of above ISDN_STAT_... constants. - * arg = depending on status-type. - * num = depending on status-type. - */ - int (*statcallb)(isdn_ctrl*); - - /* Send command - * Parameters: - * isdn_ctrl* - * driver = Driver ID. - * command = One of above ISDN_CMD_... constants. - * arg = depending on command. - * num = depending on command. - */ - int (*command)(isdn_ctrl*); - - /* - * Send data using sk_buff's - * Parameters: - * int driverId - * int local channel-number (0...) - * int Flag: Need ACK for this packet. - * struct sk_buff *skb Data to send - */ - int (*writebuf_skb) (int, int, int, struct sk_buff *); - - /* Send raw D-Channel-Commands - * Parameters: - * u_char pointer data - * int length of data - * int driverId - * int local channel-number (0 ...) - */ - int (*writecmd)(const u_char __user *, int, int, int); - - /* Read raw Status replies - * u_char pointer data (volatile) - * int length of buffer - * int driverId - * int local channel-number (0 ...) - */ - int (*readstat)(u_char __user *, int, int, int); - - char id[20]; -} isdn_if; - -/* - * Function which must be called by lowlevel-driver at loadtime with - * the following fields of above struct set: - * - * channels Number of channels that will be supported. - * hl_hdrlen Space to preserve in sk_buff's when sending. Drivers, not - * supporting sk_buff's should set this to 0. - * command Address of Command-Handler. - * features Bitwise coded Features of this driver. (use ISDN_FEATURE_...) - * writebuf_skb Address of Skbuff-Send-Handler. - * writecmd " " D-Channel " which accepts raw D-Ch-Commands. - * readstat " " D-Channel " which delivers raw Status-Data. - * - * The linklevel-driver fills the following fields: - * - * channels Driver-ID assigned to this driver. (Must be used on all - * subsequent callbacks. - * rcvcallb_skb Address of handler for received Skbuff's. - * statcallb " " " for status-changes. - * - */ -extern int register_isdn(isdn_if*); -#include <linux/uaccess.h> - -#endif /* __ISDNIF_H__ */ |