summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2020-09-13 11:14:59 -0700
committerOlof Johansson <olof@lixom.net>2020-09-13 11:15:01 -0700
commit465c335bb5fd25f1f433481b7423a982e23a4c58 (patch)
tree7c6214703083462e2b539dc630bfb63f3ac97874
parentf75aef392f869018f78cfedf3c320a6b3fcfda6b (diff)
parenta1342f6a9ff88ad88ff7a981c53ae0869c94d243 (diff)
downloadlinux-465c335bb5fd25f1f433481b7423a982e23a4c58.tar.gz
Merge tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung S3C24xx and S3C64xx machine code cleanup for v5.10 Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it also touches files shared with S5Pv210 and Exynos. This is mostly Arnd Bergmann work which Krzysztof Kozlowski took over, rebased and polished. The goal is to cleanup, merge and finally make the Samsung S3C24xx and S3C64xx architectures multiplatform. The multiplatform did not happen yet here - just cleaning up and merging into one arch/arm/mach-s3c directory. However this is step forward for multiplatform or at least to keep this code still maintainable. This pulls also branch with changes for Samsung SoC sound drivers from broonie/sound because the cleanups there were part of this series and all further patches depend on them. * tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits) ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup ARM: s3c: Cleanup from old plat-samsung include ARM: s3c: make headers local if possible ARM: s3c: move into a common directory ARM: s3c24xx: stop including mach/hardware.h from mach/io.h cpufreq: s3c24xx: move low-level clk reg access into platform code cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh ARM: s3c: remove cpufreq header dependencies cpufreq: s3c24xx: split out registers fbdev: s3c2410fb: remove mach header dependency ARM: s3c24xx: bast: avoid irq_desc array usage ARM: s3c24xx: spi: avoid hardcoding fiq number in driver ARM: s3c24xx: include mach/irqs.h where needed ARM: s3c24xx: move s3cmci pinctrl handling into board files ARM: s3c24xx: move iis pinctrl config into boards ARM: s3c24xx: move spi fiq handler into platform ARM: s3c: adc: move header to linux/soc/samsung ARM: s3c24xx: move irqchip driver back into platform ARM: s3c24xx: move regs-spi.h into spi driver ARM: s3c64xx: remove mach/hardware.h ... Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
-rw-r--r--MAINTAINERS24
-rw-r--r--arch/arm/Kconfig8
-rw-r--r--arch/arm/Kconfig.debug18
-rw-r--r--arch/arm/Makefile7
-rw-r--r--arch/arm/mach-exynos/Kconfig1
-rw-r--r--arch/arm/mach-exynos/Makefile4
-rw-r--r--arch/arm/mach-exynos/common.h6
-rw-r--r--arch/arm/mach-exynos/exynos.c21
-rw-r--r--arch/arm/mach-exynos/include/mach/map.h18
-rw-r--r--arch/arm/mach-exynos/platsmp.c4
-rw-r--r--arch/arm/mach-exynos/pm.c8
-rw-r--r--arch/arm/mach-s3c/Kconfig (renamed from arch/arm/plat-samsung/Kconfig)72
-rw-r--r--arch/arm/mach-s3c/Kconfig.s3c24xx (renamed from arch/arm/mach-s3c24xx/Kconfig)13
-rw-r--r--arch/arm/mach-s3c/Kconfig.s3c64xx (renamed from arch/arm/mach-s3c64xx/Kconfig)5
-rw-r--r--arch/arm/mach-s3c/Makefile (renamed from arch/arm/plat-samsung/Makefile)16
-rw-r--r--arch/arm/mach-s3c/Makefile.boot (renamed from arch/arm/mach-s3c24xx/Makefile.boot)0
-rw-r--r--arch/arm/mach-s3c/Makefile.s3c24xx (renamed from arch/arm/mach-s3c24xx/Makefile)22
-rw-r--r--arch/arm/mach-s3c/Makefile.s3c64xx (renamed from arch/arm/mach-s3c64xx/Makefile)36
-rw-r--r--arch/arm/mach-s3c/adc-core.h (renamed from arch/arm/plat-samsung/include/plat/adc-core.h)0
-rw-r--r--arch/arm/mach-s3c/adc.c (renamed from arch/arm/plat-samsung/adc.c)4
-rw-r--r--arch/arm/mach-s3c/anubis.h (renamed from arch/arm/mach-s3c24xx/anubis.h)0
-rw-r--r--arch/arm/mach-s3c/ata-core-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/ata-core.h)6
-rw-r--r--arch/arm/mach-s3c/backlight-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/backlight.h)6
-rw-r--r--arch/arm/mach-s3c/bast-ide.c (renamed from arch/arm/mach-s3c24xx/bast-ide.c)3
-rw-r--r--arch/arm/mach-s3c/bast-irq.c (renamed from arch/arm/mach-s3c24xx/bast-irq.c)8
-rw-r--r--arch/arm/mach-s3c/bast.h (renamed from arch/arm/mach-s3c24xx/bast.h)0
-rw-r--r--arch/arm/mach-s3c/common-smdk-s3c24xx.c (renamed from arch/arm/mach-s3c24xx/common-smdk.c)13
-rw-r--r--arch/arm/mach-s3c/common-smdk-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/common-smdk.h)0
-rw-r--r--arch/arm/mach-s3c/cpu.c (renamed from arch/arm/plat-samsung/cpu.c)21
-rw-r--r--arch/arm/mach-s3c/cpu.h (renamed from arch/arm/plat-samsung/include/plat/cpu.h)12
-rw-r--r--arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c (renamed from arch/arm/mach-s3c24xx/cpufreq-utils.c)40
-rw-r--r--arch/arm/mach-s3c/cpuidle-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/cpuidle.c)8
-rw-r--r--arch/arm/mach-s3c/crag6410.h (renamed from arch/arm/mach-s3c64xx/crag6410.h)2
-rw-r--r--arch/arm/mach-s3c/dev-audio-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/dev-audio.c)9
-rw-r--r--arch/arm/mach-s3c/dev-backlight-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/dev-backlight.c)6
-rw-r--r--arch/arm/mach-s3c/dev-uart-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/dev-uart.c)5
-rw-r--r--arch/arm/mach-s3c/dev-uart.c (renamed from arch/arm/plat-samsung/dev-uart.c)2
-rw-r--r--arch/arm/mach-s3c/devs.c (renamed from arch/arm/plat-samsung/devs.c)57
-rw-r--r--arch/arm/mach-s3c/devs.h (renamed from arch/arm/plat-samsung/include/plat/devs.h)0
-rw-r--r--arch/arm/mach-s3c/dma-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/include/mach/dma.h)0
-rw-r--r--arch/arm/mach-s3c/dma-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/include/mach/dma.h)0
-rw-r--r--arch/arm/mach-s3c/dma.h9
-rw-r--r--arch/arm/mach-s3c/fb-core-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/fb-core.h)6
-rw-r--r--arch/arm/mach-s3c/fb.h (renamed from arch/arm/plat-samsung/include/plat/fb.h)0
-rw-r--r--arch/arm/mach-s3c/gpio-cfg-helpers.h (renamed from arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h)0
-rw-r--r--arch/arm/mach-s3c/gpio-cfg.h (renamed from arch/arm/plat-samsung/include/plat/gpio-cfg.h)0
-rw-r--r--arch/arm/mach-s3c/gpio-core.h (renamed from arch/arm/plat-samsung/include/plat/gpio-core.h)2
-rw-r--r--arch/arm/mach-s3c/gpio-samsung-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h)2
-rw-r--r--arch/arm/mach-s3c/gpio-samsung-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h)0
-rw-r--r--arch/arm/mach-s3c/gpio-samsung.c (renamed from arch/arm/plat-samsung/gpio-samsung.c)18
-rw-r--r--arch/arm/mach-s3c/gpio-samsung.h9
-rw-r--r--arch/arm/mach-s3c/gta02.h (renamed from arch/arm/mach-s3c24xx/gta02.h)2
-rw-r--r--arch/arm/mach-s3c/h1940-bluetooth.c (renamed from arch/arm/mach-s3c24xx/h1940-bluetooth.c)7
-rw-r--r--arch/arm/mach-s3c/h1940.h (renamed from arch/arm/mach-s3c24xx/h1940.h)0
-rw-r--r--arch/arm/mach-s3c/hardware-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/include/mach/hardware.h)13
-rw-r--r--arch/arm/mach-s3c/iic-core.h (renamed from arch/arm/plat-samsung/include/plat/iic-core.h)0
-rw-r--r--arch/arm/mach-s3c/include/mach/io-s3c24xx.h50
-rw-r--r--arch/arm/mach-s3c/include/mach/io.h8
-rw-r--r--arch/arm/mach-s3c/include/mach/irqs-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/include/mach/irqs.h)0
-rw-r--r--arch/arm/mach-s3c/include/mach/irqs-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/include/mach/irqs.h)0
-rw-r--r--arch/arm/mach-s3c/include/mach/irqs.h9
-rw-r--r--arch/arm/mach-s3c/include/mach/map-base.h (renamed from arch/arm/plat-samsung/include/plat/map-base.h)0
-rw-r--r--arch/arm/mach-s3c/init.c (renamed from arch/arm/plat-samsung/init.c)4
-rw-r--r--arch/arm/mach-s3c/iotiming-s3c2410.c (renamed from arch/arm/mach-s3c24xx/iotiming-s3c2410.c)14
-rw-r--r--arch/arm/mach-s3c/iotiming-s3c2412.c (renamed from arch/arm/mach-s3c24xx/iotiming-s3c2412.c)6
-rw-r--r--arch/arm/mach-s3c/irq-pm-s3c24xx.c (renamed from arch/arm/mach-s3c24xx/irq-pm.c)16
-rw-r--r--arch/arm/mach-s3c/irq-pm-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/irq-pm.c)8
-rw-r--r--arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c9
-rw-r--r--arch/arm/mach-s3c/irq-s3c24xx-fiq.S (renamed from drivers/spi/spi-s3c24xx-fiq.S)10
-rw-r--r--arch/arm/mach-s3c/irq-s3c24xx.c (renamed from drivers/irqchip/irq-s3c24xx.c)23
-rw-r--r--arch/arm/mach-s3c/irq-uart-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/irq-uart.h)0
-rw-r--r--arch/arm/mach-s3c/keypad.h (renamed from arch/arm/plat-samsung/include/plat/keypad.h)0
-rw-r--r--arch/arm/mach-s3c/mach-amlm5900.c (renamed from arch/arm/mach-s3c24xx/mach-amlm5900.c)41
-rw-r--r--arch/arm/mach-s3c/mach-anubis.c (renamed from arch/arm/mach-s3c24xx/mach-anubis.c)17
-rw-r--r--arch/arm/mach-s3c/mach-anw6410.c (renamed from arch/arm/mach-s3c64xx/mach-anw6410.c)23
-rw-r--r--arch/arm/mach-s3c/mach-at2440evb.c (renamed from arch/arm/mach-s3c24xx/mach-at2440evb.c)31
-rw-r--r--arch/arm/mach-s3c/mach-bast.c (renamed from arch/arm/mach-s3c24xx/mach-bast.c)25
-rw-r--r--arch/arm/mach-s3c/mach-crag6410-module.c (renamed from arch/arm/mach-s3c64xx/mach-crag6410-module.c)7
-rw-r--r--arch/arm/mach-s3c/mach-crag6410.c (renamed from arch/arm/mach-s3c64xx/mach-crag6410.c)37
-rw-r--r--arch/arm/mach-s3c/mach-gta02.c (renamed from arch/arm/mach-s3c24xx/mach-gta02.c)60
-rw-r--r--arch/arm/mach-s3c/mach-h1940.c (renamed from arch/arm/mach-s3c24xx/mach-h1940.c)73
-rw-r--r--arch/arm/mach-s3c/mach-hmt.c (renamed from arch/arm/mach-s3c64xx/mach-hmt.c)19
-rw-r--r--arch/arm/mach-s3c/mach-jive.c (renamed from arch/arm/mach-s3c24xx/mach-jive.c)30
-rw-r--r--arch/arm/mach-s3c/mach-mini2440.c (renamed from arch/arm/mach-s3c24xx/mach-mini2440.c)45
-rw-r--r--arch/arm/mach-s3c/mach-mini6410.c (renamed from arch/arm/mach-s3c64xx/mach-mini6410.c)30
-rw-r--r--arch/arm/mach-s3c/mach-n30.c (renamed from arch/arm/mach-s3c24xx/mach-n30.c)39
-rw-r--r--arch/arm/mach-s3c/mach-ncp.c (renamed from arch/arm/mach-s3c64xx/mach-ncp.c)17
-rw-r--r--arch/arm/mach-s3c/mach-nexcoder.c (renamed from arch/arm/mach-s3c24xx/mach-nexcoder.c)23
-rw-r--r--arch/arm/mach-s3c/mach-osiris-dvs.c (renamed from arch/arm/mach-s3c24xx/mach-osiris-dvs.c)4
-rw-r--r--arch/arm/mach-s3c/mach-osiris.c (renamed from arch/arm/mach-s3c24xx/mach-osiris.c)27
-rw-r--r--arch/arm/mach-s3c/mach-otom.c (renamed from arch/arm/mach-s3c24xx/mach-otom.c)19
-rw-r--r--arch/arm/mach-s3c/mach-qt2410.c (renamed from arch/arm/mach-s3c24xx/mach-qt2410.c)41
-rw-r--r--arch/arm/mach-s3c/mach-real6410.c (renamed from arch/arm/mach-s3c64xx/mach-real6410.c)26
-rw-r--r--arch/arm/mach-s3c/mach-rx1950.c (renamed from arch/arm/mach-s3c24xx/mach-rx1950.c)60
-rw-r--r--arch/arm/mach-s3c/mach-rx3715.c (renamed from arch/arm/mach-s3c24xx/mach-rx3715.c)29
-rw-r--r--arch/arm/mach-s3c/mach-s3c2416-dt.c (renamed from arch/arm/mach-s3c24xx/mach-s3c2416-dt.c)8
-rw-r--r--arch/arm/mach-s3c/mach-s3c64xx-dt.c (renamed from arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c)23
-rw-r--r--arch/arm/mach-s3c/mach-smartq.c (renamed from arch/arm/mach-s3c64xx/mach-smartq.c)21
-rw-r--r--arch/arm/mach-s3c/mach-smartq.h (renamed from arch/arm/mach-s3c64xx/mach-smartq.h)0
-rw-r--r--arch/arm/mach-s3c/mach-smartq5.c (renamed from arch/arm/mach-s3c64xx/mach-smartq5.c)20
-rw-r--r--arch/arm/mach-s3c/mach-smartq7.c (renamed from arch/arm/mach-s3c64xx/mach-smartq7.c)20
-rw-r--r--arch/arm/mach-s3c/mach-smdk2410.c (renamed from arch/arm/mach-s3c24xx/mach-smdk2410.c)19
-rw-r--r--arch/arm/mach-s3c/mach-smdk2413.c (renamed from arch/arm/mach-s3c24xx/mach-smdk2413.c)30
-rw-r--r--arch/arm/mach-s3c/mach-smdk2416.c (renamed from arch/arm/mach-s3c24xx/mach-smdk2416.c)28
-rw-r--r--arch/arm/mach-s3c/mach-smdk2440.c (renamed from arch/arm/mach-s3c24xx/mach-smdk2440.c)30
-rw-r--r--arch/arm/mach-s3c/mach-smdk2443.c (renamed from arch/arm/mach-s3c24xx/mach-smdk2443.c)19
-rw-r--r--arch/arm/mach-s3c/mach-smdk6400.c (renamed from arch/arm/mach-s3c64xx/mach-smdk6400.c)17
-rw-r--r--arch/arm/mach-s3c/mach-smdk6410.c (renamed from arch/arm/mach-s3c64xx/mach-smdk6410.c)35
-rw-r--r--arch/arm/mach-s3c/mach-tct_hammer.c (renamed from arch/arm/mach-s3c24xx/mach-tct_hammer.c)27
-rw-r--r--arch/arm/mach-s3c/mach-vr1000.c (renamed from arch/arm/mach-s3c24xx/mach-vr1000.c)18
-rw-r--r--arch/arm/mach-s3c/mach-vstms.c (renamed from arch/arm/mach-s3c24xx/mach-vstms.c)23
-rw-r--r--arch/arm/mach-s3c/map-s3c.h (renamed from arch/arm/plat-samsung/include/plat/map-s3c.h)12
-rw-r--r--arch/arm/mach-s3c/map-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/include/mach/map.h)6
-rw-r--r--arch/arm/mach-s3c/map-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/include/mach/map.h)4
-rw-r--r--arch/arm/mach-s3c/map-s5p.h (renamed from arch/arm/plat-samsung/include/plat/map-s5p.h)4
-rw-r--r--arch/arm/mach-s3c/map.h9
-rw-r--r--arch/arm/mach-s3c/nand-core-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/nand-core.h)6
-rw-r--r--arch/arm/mach-s3c/onenand-core-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/onenand-core.h)6
-rw-r--r--arch/arm/mach-s3c/osiris.h (renamed from arch/arm/mach-s3c24xx/osiris.h)0
-rw-r--r--arch/arm/mach-s3c/otom.h (renamed from arch/arm/mach-s3c24xx/otom.h)0
-rw-r--r--arch/arm/mach-s3c/pl080.c (renamed from arch/arm/mach-s3c64xx/pl080.c)6
-rw-r--r--arch/arm/mach-s3c/platformdata.c (renamed from arch/arm/plat-samsung/platformdata.c)4
-rw-r--r--arch/arm/mach-s3c/pll-s3c2410.c (renamed from arch/arm/mach-s3c24xx/pll-s3c2410.c)4
-rw-r--r--arch/arm/mach-s3c/pll-s3c2440-12000000.c (renamed from arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c)4
-rw-r--r--arch/arm/mach-s3c/pll-s3c2440-16934400.c (renamed from arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c)4
-rw-r--r--arch/arm/mach-s3c/pm-common.c (renamed from arch/arm/plat-samsung/pm-common.c)4
-rw-r--r--arch/arm/mach-s3c/pm-common.h40
-rw-r--r--arch/arm/mach-s3c/pm-core-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/include/mach/pm-core.h)10
-rw-r--r--arch/arm/mach-s3c/pm-core-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/include/mach/pm-core.h)50
-rw-r--r--arch/arm/mach-s3c/pm-core.h9
-rw-r--r--arch/arm/mach-s3c/pm-gpio.c (renamed from arch/arm/plat-samsung/pm-gpio.c)6
-rw-r--r--arch/arm/mach-s3c/pm-h1940.S (renamed from arch/arm/mach-s3c24xx/pm-h1940.S)5
-rw-r--r--arch/arm/mach-s3c/pm-s3c2410.c (renamed from arch/arm/mach-s3c24xx/pm-s3c2410.c)11
-rw-r--r--arch/arm/mach-s3c/pm-s3c2412.c (renamed from arch/arm/mach-s3c24xx/pm-s3c2412.c)12
-rw-r--r--arch/arm/mach-s3c/pm-s3c2416.c (renamed from arch/arm/mach-s3c24xx/pm-s3c2416.c)6
-rw-r--r--arch/arm/mach-s3c/pm-s3c24xx.c (renamed from arch/arm/mach-s3c24xx/pm.c)14
-rw-r--r--arch/arm/mach-s3c/pm-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/pm.c)74
-rw-r--r--arch/arm/mach-s3c/pm.c (renamed from arch/arm/plat-samsung/pm.c)20
-rw-r--r--arch/arm/mach-s3c/pm.h (renamed from arch/arm/plat-samsung/include/plat/pm.h)2
-rw-r--r--arch/arm/mach-s3c/pwm-core.h (renamed from arch/arm/plat-samsung/include/plat/pwm-core.h)0
-rw-r--r--arch/arm/mach-s3c/regs-adc.h (renamed from arch/arm/plat-samsung/include/plat/regs-adc.h)0
-rw-r--r--arch/arm/mach-s3c/regs-clock-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/include/mach/regs-clock.h)2
-rw-r--r--arch/arm/mach-s3c/regs-clock-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/include/mach/regs-clock.h)0
-rw-r--r--arch/arm/mach-s3c/regs-clock.h9
-rw-r--r--arch/arm/mach-s3c/regs-dsc-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/regs-dsc.h)6
-rw-r--r--arch/arm/mach-s3c/regs-gpio-memport-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/regs-gpio-memport.h)0
-rw-r--r--arch/arm/mach-s3c/regs-gpio-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/include/mach/regs-gpio.h)2
-rw-r--r--arch/arm/mach-s3c/regs-gpio-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/include/mach/regs-gpio.h)0
-rw-r--r--arch/arm/mach-s3c/regs-gpio.h9
-rw-r--r--arch/arm/mach-s3c/regs-irq-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/include/mach/regs-irq.h)2
-rw-r--r--arch/arm/mach-s3c/regs-irq-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/include/mach/regs-irq.h)0
-rw-r--r--arch/arm/mach-s3c/regs-irq.h9
-rw-r--r--arch/arm/mach-s3c/regs-irqtype.h (renamed from arch/arm/plat-samsung/include/plat/regs-irqtype.h)0
-rw-r--r--arch/arm/mach-s3c/regs-mem-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/regs-mem.h)2
-rw-r--r--arch/arm/mach-s3c/regs-modem-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/regs-modem.h)0
-rw-r--r--arch/arm/mach-s3c/regs-s3c2443-clock.h (renamed from arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h)50
-rw-r--r--arch/arm/mach-s3c/regs-srom-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/regs-srom.h)0
-rw-r--r--arch/arm/mach-s3c/regs-sys-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/regs-sys.h)0
-rw-r--r--arch/arm/mach-s3c/regs-syscon-power-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/regs-syscon-power.h)0
-rw-r--r--arch/arm/mach-s3c/regs-usb-hsotg-phy-s3c64xx.h (renamed from arch/arm/mach-s3c64xx/regs-usb-hsotg-phy.h)0
-rw-r--r--arch/arm/mach-s3c/rtc-core-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/include/mach/rtc-core.h)6
-rw-r--r--arch/arm/mach-s3c/s3c2410.c (renamed from arch/arm/mach-s3c24xx/s3c2410.c)21
-rw-r--r--arch/arm/mach-s3c/s3c2412-power.h (renamed from arch/arm/mach-s3c24xx/s3c2412-power.h)0
-rw-r--r--arch/arm/mach-s3c/s3c2412.c (renamed from arch/arm/mach-s3c24xx/s3c2412.c)24
-rw-r--r--arch/arm/mach-s3c/s3c2412.h (renamed from arch/arm/mach-s3c24xx/include/mach/s3c2412.h)2
-rw-r--r--arch/arm/mach-s3c/s3c2416.c (renamed from arch/arm/mach-s3c24xx/s3c2416.c)34
-rw-r--r--arch/arm/mach-s3c/s3c2440.c (renamed from arch/arm/mach-s3c24xx/s3c2440.c)17
-rw-r--r--arch/arm/mach-s3c/s3c2442.c (renamed from arch/arm/mach-s3c24xx/s3c2442.c)17
-rw-r--r--arch/arm/mach-s3c/s3c2443.c (renamed from arch/arm/mach-s3c24xx/s3c2443.c)28
-rw-r--r--arch/arm/mach-s3c/s3c244x.c (renamed from arch/arm/mach-s3c24xx/s3c244x.c)20
-rw-r--r--arch/arm/mach-s3c/s3c24xx.c (renamed from arch/arm/mach-s3c24xx/common.c)31
-rw-r--r--arch/arm/mach-s3c/s3c24xx.h (renamed from arch/arm/mach-s3c24xx/common.h)26
-rw-r--r--arch/arm/mach-s3c/s3c6400.c (renamed from arch/arm/mach-s3c64xx/s3c6400.c)16
-rw-r--r--arch/arm/mach-s3c/s3c6410.c (renamed from arch/arm/mach-s3c64xx/s3c6410.c)21
-rw-r--r--arch/arm/mach-s3c/s3c64xx.c (renamed from arch/arm/mach-s3c64xx/common.c)47
-rw-r--r--arch/arm/mach-s3c/s3c64xx.h (renamed from arch/arm/mach-s3c64xx/common.h)17
-rw-r--r--arch/arm/mach-s3c/sdhci.h (renamed from arch/arm/plat-samsung/include/plat/sdhci.h)2
-rw-r--r--arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/setup-fb-24bpp.c)6
-rw-r--r--arch/arm/mach-s3c/setup-i2c-s3c24xx.c (renamed from arch/arm/mach-s3c24xx/setup-i2c.c)8
-rw-r--r--arch/arm/mach-s3c/setup-i2c0-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/setup-i2c0.c)4
-rw-r--r--arch/arm/mach-s3c/setup-i2c1-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/setup-i2c1.c)4
-rw-r--r--arch/arm/mach-s3c/setup-ide-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/setup-ide.c)9
-rw-r--r--arch/arm/mach-s3c/setup-keypad-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/setup-keypad.c)6
-rw-r--r--arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c (renamed from arch/arm/mach-s3c24xx/setup-sdhci-gpio.c)7
-rw-r--r--arch/arm/mach-s3c/setup-sdhci-gpio-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/setup-sdhci-gpio.c)6
-rw-r--r--arch/arm/mach-s3c/setup-spi-s3c24xx.c (renamed from arch/arm/mach-s3c24xx/setup-spi.c)6
-rw-r--r--arch/arm/mach-s3c/setup-spi-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/setup-spi.c)5
-rw-r--r--arch/arm/mach-s3c/setup-ts-s3c24xx.c (renamed from arch/arm/mach-s3c24xx/setup-ts.c)8
-rw-r--r--arch/arm/mach-s3c/setup-usb-phy-s3c64xx.c (renamed from arch/arm/mach-s3c64xx/setup-usb-phy.c)12
-rw-r--r--arch/arm/mach-s3c/simtec-audio.c (renamed from arch/arm/mach-s3c24xx/simtec-audio.c)11
-rw-r--r--arch/arm/mach-s3c/simtec-nor.c (renamed from arch/arm/mach-s3c24xx/simtec-nor.c)2
-rw-r--r--arch/arm/mach-s3c/simtec-pm.c (renamed from arch/arm/mach-s3c24xx/simtec-pm.c)10
-rw-r--r--arch/arm/mach-s3c/simtec-usb.c (renamed from arch/arm/mach-s3c24xx/simtec-usb.c)6
-rw-r--r--arch/arm/mach-s3c/simtec.h (renamed from arch/arm/mach-s3c24xx/simtec.h)0
-rw-r--r--arch/arm/mach-s3c/sleep-s3c2410.S (renamed from arch/arm/mach-s3c24xx/sleep-s3c2410.S)9
-rw-r--r--arch/arm/mach-s3c/sleep-s3c2412.S (renamed from arch/arm/mach-s3c24xx/sleep-s3c2412.S)5
-rw-r--r--arch/arm/mach-s3c/sleep-s3c24xx.S (renamed from arch/arm/mach-s3c24xx/sleep.S)7
-rw-r--r--arch/arm/mach-s3c/sleep-s3c64xx.S (renamed from arch/arm/mach-s3c64xx/sleep.S)4
-rw-r--r--arch/arm/mach-s3c/spi-core-s3c24xx.h (renamed from arch/arm/mach-s3c24xx/spi-core.h)6
-rw-r--r--arch/arm/mach-s3c/usb-phy.h (renamed from arch/arm/plat-samsung/include/plat/usb-phy.h)0
-rw-r--r--arch/arm/mach-s3c/vr1000.h (renamed from arch/arm/mach-s3c24xx/vr1000.h)0
-rw-r--r--arch/arm/mach-s3c/wakeup-mask.c (renamed from arch/arm/plat-samsung/wakeup-mask.c)4
-rw-r--r--arch/arm/mach-s3c/wakeup-mask.h (renamed from arch/arm/plat-samsung/include/plat/wakeup-mask.h)0
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/fb.h2
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/io.h212
-rw-r--r--arch/arm/mach-s3c24xx/setup-camif.c67
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/hardware.h17
-rw-r--r--arch/arm/mach-s3c64xx/watchdog-reset.h16
-rw-r--r--arch/arm/mach-s5pv210/Kconfig2
-rw-r--r--arch/arm/mach-s5pv210/Makefile7
-rw-r--r--arch/arm/mach-s5pv210/pm.c51
-rw-r--r--arch/arm/mach-s5pv210/regs-clock.h4
-rw-r--r--arch/arm/mach-s5pv210/s5pv210.c2
-rw-r--r--arch/arm/plat-samsung/include/plat/samsung-time.h26
-rw-r--r--arch/arm/plat-samsung/watchdog-reset.c93
-rw-r--r--arch/arm64/Kconfig.platforms1
-rw-r--r--drivers/clk/samsung/clk-s3c2410-dclk.c15
-rw-r--r--drivers/clk/samsung/clk-s3c2410.c1
-rw-r--r--drivers/clk/samsung/clk-s3c2412.c1
-rw-r--r--drivers/clk/samsung/clk-s3c2443.c1
-rw-r--r--drivers/clk/samsung/clk-s3c64xx.c1
-rw-r--r--drivers/cpufreq/Kconfig.arm2
-rw-r--r--drivers/cpufreq/s3c2410-cpufreq.c10
-rw-r--r--drivers/cpufreq/s3c2412-cpufreq.c44
-rw-r--r--drivers/cpufreq/s3c2440-cpufreq.c29
-rw-r--r--drivers/cpufreq/s3c24xx-cpufreq-debugfs.c2
-rw-r--r--drivers/cpufreq/s3c24xx-cpufreq.c14
-rw-r--r--drivers/hwmon/s3c-hwmon.c2
-rw-r--r--drivers/input/touchscreen/s3c2410_ts.c37
-rw-r--r--drivers/irqchip/Makefile1
-rw-r--r--drivers/leds/leds-s3c24xx.c2
-rw-r--r--drivers/mmc/host/Kconfig2
-rw-r--r--drivers/mmc/host/s3cmci.c72
-rw-r--r--drivers/power/supply/s3c_adc_battery.c2
-rw-r--r--drivers/pwm/Kconfig2
-rw-r--r--drivers/soc/samsung/Kconfig48
-rw-r--r--drivers/soc/samsung/Makefile3
-rw-r--r--drivers/soc/samsung/s3c-pm-check.c (renamed from arch/arm/plat-samsung/pm-check.c)2
-rw-r--r--drivers/soc/samsung/s3c-pm-debug.c (renamed from arch/arm/plat-samsung/pm-debug.c)26
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi-s3c24xx-regs.h (renamed from arch/arm/plat-samsung/include/plat/regs-spi.h)9
-rw-r--r--drivers/spi/spi-s3c24xx.c28
-rw-r--r--drivers/tty/serial/Kconfig2
-rw-r--r--drivers/usb/gadget/udc/s3c-hsudc.c55
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc.c34
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc.h1
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc_regs.h (renamed from arch/arm/plat-samsung/include/plat/regs-udc.h)0
-rw-r--r--drivers/video/fbdev/s3c2410fb-regs-lcd.h (renamed from arch/arm/mach-s3c24xx/include/mach/regs-lcd.h)28
-rw-r--r--drivers/video/fbdev/s3c2410fb.c16
-rw-r--r--drivers/watchdog/Kconfig10
-rw-r--r--include/linux/clk/samsung.h56
-rw-r--r--include/linux/platform_data/clk-s3c2410.h19
-rw-r--r--include/linux/platform_data/fb-s3c2410.h (renamed from arch/arm/plat-samsung/include/plat/fb-s3c2410.h)33
-rw-r--r--include/linux/platform_data/mmc-s3cmci.h2
-rw-r--r--include/linux/platform_data/s3c-hsudc.h2
-rw-r--r--include/linux/soc/samsung/s3c-adc.h (renamed from arch/arm/plat-samsung/include/plat/adc.h)6
-rw-r--r--include/linux/soc/samsung/s3c-cpu-freq.h (renamed from arch/arm/plat-samsung/include/plat/cpu-freq.h)4
-rw-r--r--include/linux/soc/samsung/s3c-cpufreq-core.h (renamed from arch/arm/plat-samsung/include/plat/cpu-freq-core.h)14
-rw-r--r--include/linux/soc/samsung/s3c-pm.h (renamed from arch/arm/plat-samsung/include/plat/pm-common.h)69
-rw-r--r--include/linux/spi/s3c24xx-fiq.h (renamed from drivers/spi/spi-s3c24xx-fiq.h)10
-rw-r--r--include/linux/spi/s3c24xx.h2
-rw-r--r--include/media/drv-intf/s3c_camif.h4
-rw-r--r--sound/soc/samsung/Kconfig2
-rw-r--r--sound/soc/samsung/h1940_uda1380.c71
-rw-r--r--sound/soc/samsung/neo1973_wm8753.c85
-rw-r--r--sound/soc/samsung/rx1950_uda1380.c72
-rw-r--r--sound/soc/samsung/s3c-i2s-v2.c3
-rw-r--r--sound/soc/samsung/s3c-i2s-v2.h3
-rw-r--r--sound/soc/samsung/s3c2412-i2s.c9
-rw-r--r--sound/soc/samsung/s3c24xx-i2s.c7
271 files changed, 2013 insertions, 2133 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index e4647c84c987..540ff4d5a3ad 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2220,8 +2220,8 @@ ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
S: Orphan
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
-F: arch/arm/mach-s3c24xx/gta02.h
-F: arch/arm/mach-s3c24xx/mach-gta02.c
+F: arch/arm/mach-s3c/gta02.h
+F: arch/arm/mach-s3c/mach-gta02.c
ARM/Orion SoC/Technologic Systems TS-78xx platform support
M: Alexander Clouter <alex@digriz.org.uk>
@@ -2410,10 +2410,8 @@ F: arch/arm/boot/dts/exynos*
F: arch/arm/boot/dts/s3c*
F: arch/arm/boot/dts/s5p*
F: arch/arm/mach-exynos*/
-F: arch/arm/mach-s3c24*/
-F: arch/arm/mach-s3c64xx/
+F: arch/arm/mach-s3c/
F: arch/arm/mach-s5p*/
-F: arch/arm/plat-samsung/
F: arch/arm64/boot/dts/exynos/
F: drivers/*/*/*s3c24*
F: drivers/*/*s3c24*
@@ -2424,6 +2422,9 @@ F: drivers/soc/samsung/
F: drivers/tty/serial/samsung*
F: include/linux/soc/samsung/
N: exynos
+N: s3c2410
+N: s3c64xx
+N: s5pv210
ARM/SAMSUNG MOBILE MACHINE SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
@@ -15302,6 +15303,8 @@ F: Documentation/devicetree/bindings/clock/samsung,s3c*
F: Documentation/devicetree/bindings/clock/samsung,s5p*
F: drivers/clk/samsung/
F: include/dt-bindings/clock/exynos*.h
+F: include/linux/clk/samsung.h
+F: include/linux/platform_data/clk-s3c2410.h
SAMSUNG SPI DRIVERS
M: Kukjin Kim <kgene@kernel.org>
@@ -15313,6 +15316,7 @@ S: Maintained
F: Documentation/devicetree/bindings/spi/spi-samsung.txt
F: drivers/spi/spi-s3c*
F: include/linux/platform_data/spi-s3c64xx.h
+F: include/linux/spi/s3c24xx-fiq.h
SAMSUNG SXGBE DRIVERS
M: Byungho An <bh74.an@samsung.com>
@@ -15826,19 +15830,17 @@ F: drivers/video/fbdev/simplefb.c
F: include/linux/platform_data/simplefb.h
SIMTEC EB110ATX (Chalice CATS)
-M: Vincent Sanders <vince@simtec.co.uk>
M: Simtec Linux Team <linux@simtec.co.uk>
S: Supported
W: http://www.simtec.co.uk/products/EB110ATX/
SIMTEC EB2410ITX (BAST)
-M: Vincent Sanders <vince@simtec.co.uk>
M: Simtec Linux Team <linux@simtec.co.uk>
S: Supported
W: http://www.simtec.co.uk/products/EB2410ITX/
-F: arch/arm/mach-s3c24xx/bast-ide.c
-F: arch/arm/mach-s3c24xx/bast-irq.c
-F: arch/arm/mach-s3c24xx/mach-bast.c
+F: arch/arm/mach-s3c/bast-ide.c
+F: arch/arm/mach-s3c/bast-irq.c
+F: arch/arm/mach-s3c/mach-bast.c
SIOX
M: Thorsten Scherer <t.scherer@eckelmann.de>
@@ -18757,7 +18759,7 @@ F: Documentation/devicetree/bindings/mfd/wm831x.txt
F: Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
F: Documentation/devicetree/bindings/sound/wlf,arizona.yaml
F: Documentation/hwmon/wm83??.rst
-F: arch/arm/mach-s3c64xx/mach-crag6410*
+F: arch/arm/mach-s3c/mach-crag6410*
F: drivers/clk/clk-wm83*.c
F: drivers/extcon/extcon-arizona.c
F: drivers/gpio/gpio-*wm*.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e00d94b16658..82c197a248dd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -503,11 +503,12 @@ config ARCH_S3C24XX
select GPIOLIB
select GENERIC_IRQ_MULTI_HANDLER
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_IO_H
+ select S3C2410_WATCHDOG
select SAMSUNG_ATAGS
select USE_OF
+ select WATCHDOG
help
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
@@ -636,7 +637,6 @@ source "arch/arm/mach-dove/Kconfig"
source "arch/arm/mach-ep93xx/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
@@ -709,9 +709,7 @@ source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
-source "arch/arm/mach-s3c24xx/Kconfig"
-
-source "arch/arm/mach-s3c64xx/Kconfig"
+source "arch/arm/mach-s3c/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 80000a66a4e3..b4b41f9d246b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1005,7 +1005,7 @@ choice
via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
config DEBUG_S3C_UART0
- depends on PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1017,7 +1017,7 @@ choice
by the boot-loader before use.
config DEBUG_S3C_UART1
- depends on PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1029,7 +1029,7 @@ choice
by the boot-loader before use.
config DEBUG_S3C_UART2
- depends on PLAT_SAMSUNG
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
@@ -1041,7 +1041,7 @@ choice
by the boot-loader before use.
config DEBUG_S3C_UART3
- depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
+ depends on ARCH_EXYNOS || ARCH_S5PV210
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
@@ -1497,6 +1497,16 @@ config DEBUG_S3C64XX_UART
config DEBUG_S5PV210_UART
bool
+config DEBUG_S3C_UART
+ depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \
+ DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \
+ DEBUG_EXYNOS_UART
+ int
+ default "0" if DEBUG_S3C_UART0
+ default "1" if DEBUG_S3C_UART1
+ default "2" if DEBUG_S3C_UART2
+ default "3" if DEBUG_S3C_UART3
+
config DEBUG_OMAP2PLUS_UART
bool
depends on ARCH_OMAP2PLUS
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4e877354515f..d3a447a856ce 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -209,8 +209,7 @@ machine-$(CONFIG_ARCH_REALTEK) += realtek
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
-machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
-machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
+machine-$(CONFIG_PLAT_SAMSUNG) += s3c
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_RENESAS) += shmobile
@@ -232,13 +231,9 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_EXYNOS) += samsung
plat-$(CONFIG_ARCH_OMAP) += omap
-plat-$(CONFIG_ARCH_S3C64XX) += samsung
-plat-$(CONFIG_ARCH_S5PV210) += samsung
plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
-plat-$(CONFIG_PLAT_S3C24XX) += samsung
plat-$(CONFIG_PLAT_VERSATILE) += versatile
ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index f185cd3d4c62..d2d249706ebb 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -24,7 +24,6 @@ menuconfig ARCH_EXYNOS
select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 0fd3fcf8bfb0..53fa363c8e44 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -3,10 +3,6 @@
# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-
-# Core
-
obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o
obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index afd988a92836..29eb075b24a4 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -24,12 +24,12 @@
#define EXYNOS5800_SOC_ID 0xE5422000
#define EXYNOS5_SOC_MASK 0xFFFFF000
-extern unsigned long samsung_cpu_id;
+extern unsigned long exynos_cpu_id;
#define IS_SAMSUNG_CPU(name, id, mask) \
static inline int is_samsung_##name(void) \
{ \
- return ((samsung_cpu_id & mask) == (id & mask)); \
+ return ((exynos_cpu_id & mask) == (id & mask)); \
}
IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
@@ -147,7 +147,7 @@ extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
extern void exynos_set_delayed_reset_assertion(bool enable);
-extern unsigned int samsung_rev(void);
+extern unsigned int exynos_rev(void);
extern void exynos_core_restart(u32 core_id);
extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 36c37444485a..3503274e5875 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -19,11 +19,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <plat/cpu.h>
-
#include "common.h"
+#define S3C_ADDR_BASE 0xF6000000
+#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x))
+#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
+
static struct platform_device exynos_cpuidle = {
.name = "exynos_cpuidle",
#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
@@ -36,6 +37,14 @@ void __iomem *sysram_base_addr __ro_after_init;
phys_addr_t sysram_base_phys __ro_after_init;
void __iomem *sysram_ns_base_addr __ro_after_init;
+unsigned long exynos_cpu_id;
+static unsigned int exynos_cpu_rev;
+
+unsigned int exynos_rev(void)
+{
+ return exynos_cpu_rev;
+}
+
void __init exynos_sysram_init(void)
{
struct device_node *node;
@@ -86,7 +95,11 @@ static void __init exynos_init_io(void)
of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
/* detect cpu id and rev. */
- s5p_init_cpu(S5P_VA_CHIPID);
+ exynos_cpu_id = readl_relaxed(S5P_VA_CHIPID);
+ exynos_cpu_rev = exynos_cpu_id & 0xFF;
+
+ pr_info("Samsung CPU ID: 0x%08lx\n", exynos_cpu_id);
+
}
/*
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
deleted file mode 100644
index 8d58faa54ff7..000000000000
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Exynos - Memory map definitions
- */
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-
-#include <plat/map-s5p.h>
-
-#define EXYNOS_PA_CHIPID 0x10000000
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 0cbbae8bf1f8..d7fedbb2eefe 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -22,8 +22,6 @@
#include <asm/smp_scu.h>
#include <asm/firmware.h>
-#include <mach/map.h>
-
#include "common.h"
extern void exynos4_secondary_startup(void);
@@ -188,7 +186,7 @@ void exynos_scu_enable(void)
static void __iomem *cpu_boot_reg_base(void)
{
- if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
+ if (soc_is_exynos4210() && exynos_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM5;
return sysram_base_addr;
}
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 78af34cc89cc..30f4e55bf39e 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -26,18 +26,18 @@
static inline void __iomem *exynos_boot_vector_addr(void)
{
- if (samsung_rev() == EXYNOS4210_REV_1_1)
+ if (exynos_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM7;
- else if (samsung_rev() == EXYNOS4210_REV_1_0)
+ else if (exynos_rev() == EXYNOS4210_REV_1_0)
return sysram_base_addr + 0x24;
return pmu_base_addr + S5P_INFORM0;
}
static inline void __iomem *exynos_boot_vector_flag(void)
{
- if (samsung_rev() == EXYNOS4210_REV_1_1)
+ if (exynos_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM6;
- else if (samsung_rev() == EXYNOS4210_REV_1_0)
+ else if (exynos_rev() == EXYNOS4210_REV_1_0)
return sysram_base_addr + 0x20;
return pmu_base_addr + S5P_INFORM1;
}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/mach-s3c/Kconfig
index 301e572651c0..25606e668cf9 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -2,12 +2,16 @@
#
# Copyright 2009 Simtec Electronics
+source "arch/arm/mach-s3c/Kconfig.s3c24xx"
+source "arch/arm/mach-s3c/Kconfig.s3c64xx"
+
config PLAT_SAMSUNG
bool
- depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_EXYNOS || ARCH_S5PV210
+ depends on PLAT_S3C24XX || ARCH_S3C64XX
default y
select GENERIC_IRQ_CHIP
select NO_IOPORT_MAP
+ select SOC_SAMSUNG
help
Base platform code for all Samsung SoC based systems
@@ -154,7 +158,7 @@ config S3C_DEV_WDT
bool
default y if ARCH_S3C24XX
help
- Complie in platform device definition for Watchdog Timer
+ Compile in platform device definition for Watchdog Timer
config S3C_DEV_NAND
bool
@@ -169,7 +173,7 @@ config S3C_DEV_ONENAND
config S3C_DEV_RTC
bool
help
- Complie in platform device definition for RTC
+ Compile in platform device definition for RTC
config SAMSUNG_DEV_ADC
bool
@@ -234,54 +238,6 @@ config SAMSUNG_PM_GPIO
pinctrl-samsung driver.
endif
-comment "Power management"
-
-config SAMSUNG_PM_DEBUG
- bool "Samsung PM Suspend debug"
- depends on PM && DEBUG_KERNEL
- depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
- depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
- help
- Say Y here if you want verbose debugging from the PM Suspend and
- Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
- for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
- bool "SMDK LED suspend/resume debugging"
- depends on PM && (MACH_SMDK6410)
- help
- Say Y here to enable the use of the SMDK LEDs on the baseboard
- for debugging of the state of the suspend and resume process.
-
- Note, this currently only works for S3C64XX based SMDK boards.
-
-config SAMSUNG_PM_CHECK
- bool "S3C2410 PM Suspend Memory CRC"
- depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
- select CRC32
- help
- Enable the PM code's memory area checksum over sleep. This option
- will generate CRCs of all blocks of memory, and store them before
- going to sleep. The blocks are then checked on resume for any
- errors.
-
- Note, this can take several seconds depending on memory size
- and CPU speed.
-
- See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
-config SAMSUNG_PM_CHECK_CHUNKSIZE
- int "S3C2410 PM Suspend CRC Chunksize (KiB)"
- depends on PM && SAMSUNG_PM_CHECK
- default 64
- help
- Set the chunksize in Kilobytes of the CRC for checking memory
- corruption over suspend and resume. A smaller value will mean that
- the CRC data block will take more memory, but will identify any
- faults with better precision.
-
- See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
config SAMSUNG_WAKEMASK
bool
depends on PM
@@ -290,19 +246,5 @@ config SAMSUNG_WAKEMASK
and above. This code allows a set of interrupt to wakeup-mask
mappings. See <plat/wakeup-mask.h>
-config SAMSUNG_WDT_RESET
- bool
- help
- Compile support for system restart by triggering watchdog reset.
- Used on SoCs that do not provide dedicated reset control.
-
-config DEBUG_S3C_UART
- depends on PLAT_SAMSUNG
- int
- default "0" if DEBUG_S3C_UART0
- default "1" if DEBUG_S3C_UART1
- default "2" if DEBUG_S3C_UART2
- default "3" if DEBUG_S3C_UART3
-
endmenu
endif
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c/Kconfig.s3c24xx
index 7673dde9671a..000e3e234f71 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig.s3c24xx
@@ -123,11 +123,6 @@ config S3C24XX_PLL
This also means that the PLL tables for the selected CPU(s) will
be built which may increase the size of the kernel image.
-config S3C_SETUP_CAMIF
- bool
- help
- Compile in common setup code for S3C CAMIF devices
-
# cpu frequency items common between s3c2410 and s3c2440/s3c2442
config S3C2410_IOTIMING
@@ -137,13 +132,6 @@ config S3C2410_IOTIMING
Internal node to select io timing code that is common to the s3c2410
and s3c2440/s3c2442 cpu frequency support.
-config S3C2410_CPUFREQ_UTILS
- bool
- depends on ARM_S3C24XX_CPUFREQ
- help
- Internal node to select timing code that is common to the s3c2410
- and s3c2440/s3c244 cpu frequency support.
-
# cpu frequency support common to s3c2412, s3c2413 and s3c2442
config S3C2412_IOTIMING
@@ -468,7 +456,6 @@ config MACH_MINI2440
select NEW_LEDS
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
- select S3C_SETUP_CAMIF
help
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c/Kconfig.s3c64xx
index ac3e3563487f..f3fcb570edf5 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -13,15 +13,15 @@ menuconfig ARCH_S3C64XX
select GPIO_SAMSUNG if ATAGS
select GPIOLIB
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_TCM
select PLAT_SAMSUNG
select PM_GENERIC_DOMAINS if PM
select S3C_DEV_NAND if ATAGS
select S3C_GPIO_TRACK if ATAGS
+ select S3C2410_WATCHDOG
select SAMSUNG_ATAGS if ATAGS
select SAMSUNG_WAKEMASK if PM
- select SAMSUNG_WDT_RESET
+ select WATCHDOG
help
Samsung S3C64XX series based systems
@@ -165,7 +165,6 @@ config MACH_SMDK6410
bool "SMDK6410"
depends on ATAGS
select CPU_S3C6410
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/mach-s3c/Makefile
index 3db9d2c38258..54188d10ab2e 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/mach-s3c/Makefile
@@ -2,9 +2,16 @@
#
# Copyright 2009 Simtec Electronics
-ccflags-$(CONFIG_ARCH_S3C64XX) := -I$(srctree)/arch/arm/mach-s3c64xx/include
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include
+ifdef CONFIG_ARCH_S3C24XX
+include $(src)/Makefile.s3c24xx
+endif
+
+ifdef CONFIG_ARCH_S3C64XX
+include $(src)/Makefile.s3c64xx
+endif
+
# Objects we always build independent of SoC choice
obj-y += init.o cpu.o
@@ -24,12 +31,7 @@ obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
# PM support
-obj-$(CONFIG_PM_SLEEP) += pm-common.o
-obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm-common.o
-obj-$(CONFIG_SAMSUNG_PM) += pm.o
+obj-$(CONFIG_SAMSUNG_PM) += pm.o pm-common.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
-obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
-obj-$(CONFIG_SAMSUNG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
-obj-$(CONFIG_SAMSUNG_WDT_RESET) += watchdog-reset.o
diff --git a/arch/arm/mach-s3c24xx/Makefile.boot b/arch/arm/mach-s3c/Makefile.boot
index 7f19e226035e..7f19e226035e 100644
--- a/arch/arm/mach-s3c24xx/Makefile.boot
+++ b/arch/arm/mach-s3c/Makefile.boot
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c/Makefile.s3c24xx
index 6692f2de71b2..3483ab3a2b81 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c/Makefile.s3c24xx
@@ -7,7 +7,10 @@
# core
-obj-y += common.o
+obj-y += s3c24xx.o
+obj-y += irq-s3c24xx.o
+obj-$(CONFIG_SPI_S3C24XX_FIQ) += irq-s3c24xx-fiq.o
+obj-$(CONFIG_SPI_S3C24XX_FIQ) += irq-s3c24xx-fiq-exports.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
@@ -30,12 +33,12 @@ obj-$(CONFIG_CPU_S3C2443) += s3c2443.o
# PM
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o
+obj-$(CONFIG_PM) += pm-s3c24xx.o
+obj-$(CONFIG_PM_SLEEP) += irq-pm-s3c24xx.o sleep-s3c24xx.o
# common code
-obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += cpufreq-utils-s3c24xx.o
obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o
obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
@@ -80,7 +83,7 @@ obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o
# common bits of machine support
-obj-$(CONFIG_S3C24XX_SMDK) += common-smdk.o
+obj-$(CONFIG_S3C24XX_SMDK) += common-smdk-s3c24xx.o
obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o
obj-$(CONFIG_S3C24XX_SIMTEC_NOR) += simtec-nor.o
obj-$(CONFIG_S3C24XX_SIMTEC_PM) += simtec-pm.o
@@ -93,8 +96,7 @@ obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
# device setup
-obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi.o
-obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
-obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts.o
-obj-$(CONFIG_S3C_SETUP_CAMIF) += setup-camif.o
+obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c24xx.o
+obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi-s3c24xx.o
+obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c-s3c24xx.o
+obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts-s3c24xx.o
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c/Makefile.s3c64xx
index 8caeb4ad17e9..0c18e31936df 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -3,22 +3,22 @@
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
# PM
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM_SLEEP) += sleep.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-$(CONFIG_PM) += pm-s3c64xx.o
+obj-$(CONFIG_PM_SLEEP) += sleep-s3c64xx.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle-s3c64xx.o
ifdef CONFIG_SAMSUNG_ATAGS
-obj-$(CONFIG_PM_SLEEP) += irq-pm.o
+obj-$(CONFIG_PM_SLEEP) += irq-pm-s3c64xx.o
# Core
-obj-y += common.o
+obj-y += s3c64xx.o
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
@@ -28,21 +28,21 @@ obj-$(CONFIG_S3C64XX_PL080) += pl080.o
# Device support
-obj-y += dev-uart.o
-obj-y += dev-audio.o
+obj-y += dev-uart-s3c64xx.o
+obj-y += dev-audio-s3c64xx.o
# Device setup
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi.o
-obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o
+obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight-s3c64xx.o
# Machine support
diff --git a/arch/arm/plat-samsung/include/plat/adc-core.h b/arch/arm/mach-s3c/adc-core.h
index 039f6862b6a7..039f6862b6a7 100644
--- a/arch/arm/plat-samsung/include/plat/adc-core.h
+++ b/arch/arm/mach-s3c/adc-core.h
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/mach-s3c/adc.c
index 55b1925f65d7..0232520d3c13 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/mach-s3c/adc.c
@@ -19,8 +19,8 @@
#include <linux/io.h>
#include <linux/regulator/consumer.h>
-#include <plat/regs-adc.h>
-#include <plat/adc.h>
+#include "regs-adc.h"
+#include <linux/soc/samsung/s3c-adc.h>
/* This driver is designed to control the usage of the ADC block between
* the touchscreen and any other drivers that may need to use it, such as
diff --git a/arch/arm/mach-s3c24xx/anubis.h b/arch/arm/mach-s3c/anubis.h
index 13847292e6c7..13847292e6c7 100644
--- a/arch/arm/mach-s3c24xx/anubis.h
+++ b/arch/arm/mach-s3c/anubis.h
diff --git a/arch/arm/mach-s3c64xx/ata-core.h b/arch/arm/mach-s3c/ata-core-s3c64xx.h
index 6d9a81f759e6..4863ad9d3a42 100644
--- a/arch/arm/mach-s3c64xx/ata-core.h
+++ b/arch/arm/mach-s3c/ata-core-s3c64xx.h
@@ -6,8 +6,8 @@
* Samsung CF-ATA Controller core functions
*/
-#ifndef __ASM_PLAT_ATA_CORE_H
-#define __ASM_PLAT_ATA_CORE_H __FILE__
+#ifndef __ASM_PLAT_ATA_CORE_S3C64XX_H
+#define __ASM_PLAT_ATA_CORE_S3C64XX_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
@@ -21,4 +21,4 @@ static inline void s3c_cfcon_setname(char *name)
#endif
}
-#endif /* __ASM_PLAT_ATA_CORE_H */
+#endif /* __ASM_PLAT_ATA_CORE_S3C64XX_H */
diff --git a/arch/arm/mach-s3c64xx/backlight.h b/arch/arm/mach-s3c/backlight-s3c64xx.h
index 028663f1cacc..2a2b35821d58 100644
--- a/arch/arm/mach-s3c64xx/backlight.h
+++ b/arch/arm/mach-s3c/backlight-s3c64xx.h
@@ -4,8 +4,8 @@
* http://www.samsung.com
*/
-#ifndef __ASM_PLAT_BACKLIGHT_H
-#define __ASM_PLAT_BACKLIGHT_H __FILE__
+#ifndef __ASM_PLAT_BACKLIGHT_S3C64XX_H
+#define __ASM_PLAT_BACKLIGHT_S3C64XX_H __FILE__
/* samsung_bl_gpio_info - GPIO info for PWM Backlight control
* @no: GPIO number for PWM timer out
@@ -19,4 +19,4 @@ struct samsung_bl_gpio_info {
extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
struct platform_pwm_backlight_data *bl_data);
-#endif /* __ASM_PLAT_BACKLIGHT_H */
+#endif /* __ASM_PLAT_BACKLIGHT_S3C64XX_H */
diff --git a/arch/arm/mach-s3c24xx/bast-ide.c b/arch/arm/mach-s3c/bast-ide.c
index 067944398f46..da64db1811d8 100644
--- a/arch/arm/mach-s3c24xx/bast-ide.c
+++ b/arch/arm/mach-s3c/bast-ide.c
@@ -19,7 +19,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
+#include "map.h"
+#include <mach/irqs.h>
#include "bast.h"
diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c/bast-irq.c
index 03728058d58d..d299f124e6dc 100644
--- a/arch/arm/mach-s3c24xx/bast-irq.c
+++ b/arch/arm/mach-s3c/bast-irq.c
@@ -15,8 +15,8 @@
#include <asm/mach-types.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
+#include "regs-irq.h"
+#include <mach/irqs.h>
#include "bast.h"
@@ -62,7 +62,7 @@ bast_pc104_mask(struct irq_data *data)
static void
bast_pc104_maskack(struct irq_data *data)
{
- struct irq_desc *desc = irq_desc + BAST_IRQ_ISA;
+ struct irq_desc *desc = irq_to_desc(BAST_IRQ_ISA);
bast_pc104_mask(data);
desc->irq_data.chip->irq_ack(&desc->irq_data);
@@ -94,8 +94,6 @@ static void bast_irq_pc104_demux(struct irq_desc *desc)
if (unlikely(stat == 0)) {
/* ack if we get an irq with nothing (ie, startup) */
-
- desc = irq_desc + BAST_IRQ_ISA;
desc->irq_data.chip->irq_ack(&desc->irq_data);
} else {
/* handle the IRQ */
diff --git a/arch/arm/mach-s3c24xx/bast.h b/arch/arm/mach-s3c/bast.h
index a7726f93f5eb..a7726f93f5eb 100644
--- a/arch/arm/mach-s3c24xx/bast.h
+++ b/arch/arm/mach-s3c/bast.h
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c/common-smdk-s3c24xx.c
index 75064dfaceb1..353bc22ce448 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c/common-smdk-s3c24xx.c
@@ -29,19 +29,18 @@
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "pm.h"
-#include "common-smdk.h"
+#include "common-smdk-s3c24xx.h"
/* LED devices */
diff --git a/arch/arm/mach-s3c24xx/common-smdk.h b/arch/arm/mach-s3c/common-smdk-s3c24xx.h
index c0352b06e435..c0352b06e435 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.h
+++ b/arch/arm/mach-s3c/common-smdk-s3c24xx.h
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/mach-s3c/cpu.c
index e1ba88ba31d8..6e9772555f0d 100644
--- a/arch/arm/plat-samsung/cpu.c
+++ b/arch/arm/mach-s3c/cpu.c
@@ -10,17 +10,10 @@
#include <linux/init.h>
#include <linux/io.h>
-#include <plat/map-base.h>
-#include <plat/cpu.h>
+#include <mach/map-base.h>
+#include "cpu.h"
unsigned long samsung_cpu_id;
-static unsigned int samsung_cpu_rev;
-
-unsigned int samsung_rev(void)
-{
- return samsung_cpu_rev;
-}
-EXPORT_SYMBOL(samsung_rev);
void __init s3c64xx_init_cpu(void)
{
@@ -34,15 +27,5 @@ void __init s3c64xx_init_cpu(void)
samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0xA1C);
}
- samsung_cpu_rev = 0;
-
- pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
-}
-
-void __init s5p_init_cpu(const void __iomem *cpuid_addr)
-{
- samsung_cpu_id = readl_relaxed(cpuid_addr);
- samsung_cpu_rev = samsung_cpu_id & 0xFF;
-
pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
}
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/mach-s3c/cpu.h
index fadcddbea064..20ff98d05c53 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/mach-s3c/cpu.h
@@ -109,9 +109,6 @@ extern void s3c_init_cpu(unsigned long idcode,
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
extern void s3c64xx_init_cpu(void);
-extern void s5p_init_cpu(const void __iomem *cpuid_addr);
-
-extern unsigned int samsung_rev(void);
extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
@@ -126,15 +123,6 @@ extern struct syscore_ops s3c2412_pm_syscore_ops;
extern struct syscore_ops s3c2416_pm_syscore_ops;
extern struct syscore_ops s3c244x_pm_syscore_ops;
-/* system device subsystems */
-
-extern struct bus_type s3c2410_subsys;
-extern struct bus_type s3c2410a_subsys;
-extern struct bus_type s3c2412_subsys;
-extern struct bus_type s3c2416_subsys;
-extern struct bus_type s3c2440_subsys;
-extern struct bus_type s3c2442_subsys;
-extern struct bus_type s3c2443_subsys;
extern struct bus_type s3c6410_subsys;
#endif
diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
index 1a7f38d085dd..c1784d8facdf 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-utils.c
+++ b/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
@@ -12,12 +12,12 @@
#include <linux/io.h>
#include <linux/clk.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
+#include "map.h"
+#include "regs-clock.h"
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
/**
* s3c2410_cpufreq_setrefresh - set SDRAM refresh value
@@ -60,3 +60,35 @@ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
if (!IS_ERR(cfg->mpll))
clk_set_rate(cfg->mpll, cfg->pll.frequency);
}
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+u32 s3c2440_read_camdivn(void)
+{
+ return __raw_readl(S3C2440_CAMDIVN);
+}
+
+void s3c2440_write_camdivn(u32 camdiv)
+{
+ __raw_writel(camdiv, S3C2440_CAMDIVN);
+}
+#endif
+
+u32 s3c24xx_read_clkdivn(void)
+{
+ return __raw_readl(S3C2410_CLKDIVN);
+}
+
+void s3c24xx_write_clkdivn(u32 clkdiv)
+{
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+u32 s3c24xx_read_mpllcon(void)
+{
+ return __raw_readl(S3C2410_MPLLCON);
+}
+
+void s3c24xx_write_locktime(u32 locktime)
+{
+ return __raw_writel(locktime, S3C2410_LOCKTIME);
+}
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c/cpuidle-s3c64xx.c
index 0bac6f6413b0..b1c5f43d4922 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c/cpuidle-s3c64xx.c
@@ -13,11 +13,11 @@
#include <asm/cpuidle.h>
-#include <plat/cpu.h>
-#include <mach/map.h>
+#include "cpu.h"
+#include "map.h"
-#include "regs-sys.h"
-#include "regs-syscon-power.h"
+#include "regs-sys-s3c64xx.h"
+#include "regs-syscon-power-s3c64xx.h"
static int s3c64xx_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
diff --git a/arch/arm/mach-s3c64xx/crag6410.h b/arch/arm/mach-s3c/crag6410.h
index 00d9aa114aa7..f39ea2ca7a75 100644
--- a/arch/arm/mach-s3c64xx/crag6410.h
+++ b/arch/arm/mach-s3c/crag6410.h
@@ -8,7 +8,7 @@
#ifndef MACH_CRAG6410_H
#define MACH_CRAG6410_H
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#define GLENFARCLAS_PMIC_IRQ_BASE IRQ_BOARD_START
#define BANFF_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
index e3c49b5d1355..fc2f077afd24 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
@@ -11,13 +11,12 @@
#include <linux/export.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/dma.h>
+#include "map.h"
-#include <plat/devs.h>
+#include "devs.h"
#include <linux/platform_data/asoc-s3c.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
{
diff --git a/arch/arm/mach-s3c64xx/dev-backlight.c b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
index 09e6da305f60..65488b61e50c 100644
--- a/arch/arm/mach-s3c64xx/dev-backlight.c
+++ b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
@@ -11,10 +11,10 @@
#include <linux/io.h>
#include <linux/pwm_backlight.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
+#include "devs.h"
+#include "gpio-cfg.h"
-#include "backlight.h"
+#include "backlight-s3c64xx.h"
struct samsung_bl_drvdata {
struct platform_pwm_backlight_data plat_data;
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c/dev-uart-s3c64xx.c
index 5fb59ad30008..8288e8d6c092 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c/dev-uart-s3c64xx.c
@@ -15,11 +15,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
-#include <plat/devs.h>
+#include "devs.h"
/* Serial port registrations */
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/mach-s3c/dev-uart.c
index 7476a5dbae77..3d1f7f2fd7c7 100644
--- a/arch/arm/plat-samsung/dev-uart.c
+++ b/arch/arm/mach-s3c/dev-uart.c
@@ -10,7 +10,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <plat/devs.h>
+#include "devs.h"
/* uart devices */
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/mach-s3c/devs.c
index 089a17687104..06dec64848f9 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/mach-s3c/devs.c
@@ -5,6 +5,7 @@
//
// Base Samsung platform device definitions
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -37,28 +38,32 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/dma.h>
#include <mach/irqs.h>
-#include <mach/map.h>
+#include "map.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/adc.h>
+#ifdef CONFIG_PLAT_S3C24XX
+#include "regs-s3c2443-clock.h"
+#endif /* CONFIG_PLAT_S3C24XX */
+
+#include "cpu.h"
+#include "devs.h"
+#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/ata-samsung_cf.h>
-#include <plat/fb.h>
-#include <plat/fb-s3c2410.h>
+#include "fb.h"
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/hwmon-s3c.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/keypad.h>
+#include "keypad.h"
#include <linux/platform_data/mmc-s3cmci.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/pwm-core.h>
-#include <plat/sdhci.h>
+#include "pwm-core.h"
+#include "sdhci.h"
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/usb-phy.h>
-#include <plat/regs-spi.h>
+#include "usb-phy.h"
#include <linux/platform_data/asoc-s3c.h>
#include <linux/platform_data/spi-s3c64xx.h>
@@ -833,16 +838,42 @@ struct platform_device s3c_device_rtc = {
/* SDI */
#ifdef CONFIG_PLAT_S3C24XX
+void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd)
+{
+ switch (power_mode) {
+ case MMC_POWER_ON:
+ case MMC_POWER_UP:
+ /* Configure GPE5...GPE10 pins in SD mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+ break;
+
+ case MMC_POWER_OFF:
+ default:
+ gpio_direction_output(S3C2410_GPE(5), 0);
+ break;
+ }
+}
+
static struct resource s3c_sdi_resource[] = {
[0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
[1] = DEFINE_RES_IRQ(IRQ_SDI),
};
+static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
+ /* This is currently here to avoid a number of if (host->pdata)
+ * checks. Any zero fields to ensure reasonable defaults are picked. */
+ .no_wprotect = 1,
+ .no_detect = 1,
+ .set_power = s3c24xx_mci_def_set_power,
+};
+
struct platform_device s3c_device_sdi = {
.name = "s3c2410-sdi",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_sdi_resource),
.resource = s3c_sdi_resource,
+ .dev.platform_data = &s3cmci_def_pdata,
};
void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
@@ -1038,6 +1069,8 @@ struct platform_device s3c_device_usb_hsudc = {
void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
{
s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
+ pd->phy_init = s3c_hsudc_init_phy;
+ pd->phy_uninit = s3c_hsudc_uninit_phy;
}
#endif /* CONFIG_PLAT_S3C24XX */
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/mach-s3c/devs.h
index 02b0c5750572..02b0c5750572 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/mach-s3c/devs.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c/dma-s3c24xx.h
index 25fc9c258fc1..25fc9c258fc1 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c/dma-s3c24xx.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c/dma-s3c64xx.h
index 40ca8de21096..40ca8de21096 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c/dma-s3c64xx.h
diff --git a/arch/arm/mach-s3c/dma.h b/arch/arm/mach-s3c/dma.h
new file mode 100644
index 000000000000..59a4578c5f00
--- /dev/null
+++ b/arch/arm/mach-s3c/dma.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "dma-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "dma-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/fb-core.h b/arch/arm/mach-s3c/fb-core-s3c24xx.h
index 1821e820262c..0e07f3ba4aef 100644
--- a/arch/arm/mach-s3c24xx/fb-core.h
+++ b/arch/arm/mach-s3c/fb-core-s3c24xx.h
@@ -5,8 +5,8 @@
*
* Samsung framebuffer driver core functions
*/
-#ifndef __ASM_PLAT_FB_CORE_H
-#define __ASM_PLAT_FB_CORE_H __FILE__
+#ifndef __ASM_PLAT_FB_CORE_S3C24XX_H
+#define __ASM_PLAT_FB_CORE_S3C24XX_H __FILE__
/*
* These functions are only for use with the core support code, such as
@@ -21,4 +21,4 @@ static inline void s3c_fb_setname(char *name)
#endif
}
-#endif /* __ASM_PLAT_FB_CORE_H */
+#endif /* __ASM_PLAT_FB_CORE_S3C24XX_H */
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/mach-s3c/fb.h
index 615d381ae32e..615d381ae32e 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/mach-s3c/fb.h
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/mach-s3c/gpio-cfg-helpers.h
index db0c56f5ca15..db0c56f5ca15 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/mach-s3c/gpio-cfg-helpers.h
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/mach-s3c/gpio-cfg.h
index 469c220e092b..469c220e092b 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/mach-s3c/gpio-cfg.h
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/mach-s3c/gpio-core.h
index c0bfceb88340..b361c8c0d669 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/mach-s3c/gpio-core.h
@@ -11,7 +11,7 @@
#define __PLAT_SAMSUNG_GPIO_CORE_H
/* Bring in machine-local definitions, especially S3C_GPIO_END */
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#include <linux/gpio/driver.h>
#define GPIOCON_OFF (0x00)
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
index 2ad22b2d459b..c29fdc95f883 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h
+++ b/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
@@ -14,6 +14,8 @@
#ifndef GPIO_SAMSUNG_S3C24XX_H
#define GPIO_SAMSUNG_S3C24XX_H
+#include "map.h"
+
/*
* GPIO sizes for various SoCs:
*
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung-s3c64xx.h
index 8ed144a0d474..8ed144a0d474 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
+++ b/arch/arm/mach-s3c/gpio-samsung-s3c64xx.h
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/mach-s3c/gpio-samsung.c
index 8955fd675265..76ef415789f2 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/mach-s3c/gpio-samsung.c
@@ -27,15 +27,15 @@
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/pm.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "pm.h"
int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull)
diff --git a/arch/arm/mach-s3c/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung.h
new file mode 100644
index 000000000000..02f6f4a96862
--- /dev/null
+++ b/arch/arm/mach-s3c/gpio-samsung.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "gpio-samsung-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "gpio-samsung-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/gta02.h b/arch/arm/mach-s3c/gta02.h
index d5610ba829a4..043ae382bfc5 100644
--- a/arch/arm/mach-s3c24xx/gta02.h
+++ b/arch/arm/mach-s3c/gta02.h
@@ -6,7 +6,7 @@
#ifndef __MACH_S3C24XX_GTA02_H
#define __MACH_S3C24XX_GTA02_H __FILE__
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c/h1940-bluetooth.c
index 186b5321658e..59edcf8a620d 100644
--- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c/h1940-bluetooth.c
@@ -13,10 +13,9 @@
#include <linux/gpio.h>
#include <linux/rfkill.h>
-#include <plat/gpio-cfg.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include "h1940.h"
diff --git a/arch/arm/mach-s3c24xx/h1940.h b/arch/arm/mach-s3c/h1940.h
index 5dfe9d10cd15..5dfe9d10cd15 100644
--- a/arch/arm/mach-s3c24xx/h1940.h
+++ b/arch/arm/mach-s3c/h1940.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c/hardware-s3c24xx.h
index f28ac6c78d82..33b37467d05f 100644
--- a/arch/arm/mach-s3c24xx/include/mach/hardware.h
+++ b/arch/arm/mach-s3c/hardware-s3c24xx.h
@@ -6,16 +6,9 @@
* S3C2410 - hardware
*/
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASSEMBLY__
+#ifndef __ASM_ARCH_HARDWARE_S3C24XX_H
+#define __ASM_ARCH_HARDWARE_S3C24XX_H
extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
-#endif /* __ASSEMBLY__ */
-
-#include <linux/sizes.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_HARDWARE_H */
+#endif /* __ASM_ARCH_HARDWARE_S3C24XX_H */
diff --git a/arch/arm/plat-samsung/include/plat/iic-core.h b/arch/arm/mach-s3c/iic-core.h
index c5cfd5af3874..c5cfd5af3874 100644
--- a/arch/arm/plat-samsung/include/plat/iic-core.h
+++ b/arch/arm/mach-s3c/iic-core.h
diff --git a/arch/arm/mach-s3c/include/mach/io-s3c24xx.h b/arch/arm/mach-s3c/include/mach/io-s3c24xx.h
new file mode 100644
index 000000000000..738b775d3336
--- /dev/null
+++ b/arch/arm/mach-s3c/include/mach/io-s3c24xx.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-s3c2410/include/mach/io.h
+ * from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ * (C) 2003 Simtec Electronics
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_S3C24XX_H
+#define __ASM_ARM_ARCH_IO_S3C24XX_H
+
+#include <mach/map-base.h>
+
+/*
+ * ISA style IO, for each machine to sort out mappings for,
+ * if it implements it. We reserve two 16M regions for ISA,
+ * so the PC/104 can use separate addresses for 8-bit and
+ * 16-bit port I/O.
+ */
+#define PCIO_BASE S3C_ADDR(0x02000000)
+#define IO_SPACE_LIMIT 0x00ffffff
+#define S3C24XX_VA_ISA_WORD (PCIO_BASE)
+#define S3C24XX_VA_ISA_BYTE (PCIO_BASE + 0x01000000)
+
+#ifdef CONFIG_ISA
+
+#define inb(p) readb(S3C24XX_VA_ISA_BYTE + (p))
+#define inw(p) readw(S3C24XX_VA_ISA_WORD + (p))
+#define inl(p) readl(S3C24XX_VA_ISA_WORD + (p))
+
+#define outb(v,p) writeb((v), S3C24XX_VA_ISA_BYTE + (p))
+#define outw(v,p) writew((v), S3C24XX_VA_ISA_WORD + (p))
+#define outl(v,p) writel((v), S3C24XX_VA_ISA_WORD + (p))
+
+#define insb(p,d,l) readsb(S3C24XX_VA_ISA_BYTE + (p),d,l)
+#define insw(p,d,l) readsw(S3C24XX_VA_ISA_WORD + (p),d,l)
+#define insl(p,d,l) readsl(S3C24XX_VA_ISA_WORD + (p),d,l)
+
+#define outsb(p,d,l) writesb(S3C24XX_VA_ISA_BYTE + (p),d,l)
+#define outsw(p,d,l) writesw(S3C24XX_VA_ISA_WORD + (p),d,l)
+#define outsl(p,d,l) writesl(S3C24XX_VA_ISA_WORD + (p),d,l)
+
+#else
+
+#define __io(x) (PCIO_BASE + (x))
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-s3c/include/mach/io.h b/arch/arm/mach-s3c/include/mach/io.h
new file mode 100644
index 000000000000..30a0135708dc
--- /dev/null
+++ b/arch/arm/mach-s3c/include/mach/io.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "io-s3c24xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c/include/mach/irqs-s3c24xx.h
index aaf3bae08b52..aaf3bae08b52 100644
--- a/arch/arm/mach-s3c24xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c/include/mach/irqs-s3c24xx.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c/include/mach/irqs-s3c64xx.h
index c244e480e6b3..c244e480e6b3 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c/include/mach/irqs-s3c64xx.h
diff --git a/arch/arm/mach-s3c/include/mach/irqs.h b/arch/arm/mach-s3c/include/mach/irqs.h
new file mode 100644
index 000000000000..0bff1c1c8eb0
--- /dev/null
+++ b/arch/arm/mach-s3c/include/mach/irqs.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "irqs-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "irqs-s3c64xx.h"
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/map-base.h b/arch/arm/mach-s3c/include/mach/map-base.h
index 34b39ded0e2e..34b39ded0e2e 100644
--- a/arch/arm/plat-samsung/include/plat/map-base.h
+++ b/arch/arm/mach-s3c/include/mach/map-base.h
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/mach-s3c/init.c
index e9acf02ef3c3..9d92f03e9bc1 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/mach-s3c/init.c
@@ -23,8 +23,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
+#include "cpu.h"
+#include "devs.h"
static struct cpu_table *cpu;
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c/iotiming-s3c2410.c
index 9f90aaf70bf3..28d9f473e24a 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
+++ b/arch/arm/mach-s3c/iotiming-s3c2410.c
@@ -14,12 +14,12 @@
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
+#include "map.h"
+#include "regs-clock.h"
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
#define print_ns(x) ((x) / 10), ((x) % 10)
@@ -129,7 +129,7 @@ static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
return 0;
}
-int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+static int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
{
/* Currently no support for Tacp calculations. */
return 0;
@@ -288,8 +288,8 @@ static unsigned int get_0124(unsigned long hclk_tns,
* Given the BANKCON setting in @bt and the current frequency settings
* in @cfg, update the cycle timing information.
*/
-void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
- struct s3c2410_iobank_timing *bt)
+static void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
{
unsigned long bankcon = bt->bankcon;
unsigned long hclk = cfg->freq.hclk_tns;
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c/iotiming-s3c2412.c
index 59356d10fbcf..003f89c4dc53 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
+++ b/arch/arm/mach-s3c/iotiming-s3c2412.c
@@ -23,10 +23,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <mach/s3c2412.h>
+#include "s3c2412.h"
#define print_ns(x) ((x) / 10), ((x) % 10)
diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
index e0131b16a4af..4d5e28312d91 100644
--- a/arch/arm/mach-s3c24xx/irq-pm.c
+++ b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
@@ -13,14 +13,14 @@
#include <linux/syscore_ops.h>
#include <linux/io.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/pm-core.h>
+#include "cpu.h"
+#include "pm.h"
+#include <mach/map-base.h>
+#include "map-s3c.h"
+
+#include "regs-irq.h"
+#include "regs-gpio.h"
+#include "pm-core.h"
#include <asm/irq.h>
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c/irq-pm-s3c64xx.c
index 31b221190479..4a1e935bada1 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c/irq-pm-s3c64xx.c
@@ -20,11 +20,11 @@
#include <linux/io.h>
#include <linux/of.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "regs-gpio.h"
+#include "cpu.h"
+#include "pm.h"
/* We handled all the IRQ types in this code, to save having to make several
* small files to handle each different type separately. Having the EINT_GRP
diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c b/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
new file mode 100644
index 000000000000..84cf86376ded
--- /dev/null
+++ b/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/stddef.h>
+#include <linux/export.h>
+#include <linux/spi/s3c24xx-fiq.h>
+
+EXPORT_SYMBOL(s3c24xx_spi_fiq_rx);
+EXPORT_SYMBOL(s3c24xx_spi_fiq_txrx);
+EXPORT_SYMBOL(s3c24xx_spi_fiq_tx);
diff --git a/drivers/spi/spi-s3c24xx-fiq.S b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
index e95d6282109e..b54cbd012241 100644
--- a/drivers/spi/spi-s3c24xx-fiq.S
+++ b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
@@ -10,11 +10,13 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/map.h>
-#include <mach/regs-irq.h>
-#include <plat/regs-spi.h>
+#include "map.h"
+#include "regs-irq.h"
-#include "spi-s3c24xx-fiq.h"
+#include <linux/spi/s3c24xx-fiq.h>
+
+#define S3C2410_SPTDAT (0x10)
+#define S3C2410_SPRDAT (0x14)
.text
diff --git a/drivers/irqchip/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c
index d2031fecc386..79b5f19af7a5 100644
--- a/drivers/irqchip/irq-s3c24xx.c
+++ b/arch/arm/mach-s3c/irq-s3c24xx.c
@@ -25,12 +25,13 @@
#include <asm/exception.h>
#include <asm/mach/irq.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
+#include <mach/irqs.h>
+#include "regs-irq.h"
+#include "regs-gpio.h"
-#include <plat/cpu.h>
-#include <plat/regs-irqtype.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "regs-irqtype.h"
+#include "pm.h"
#define S3C_IRQTYPE_NONE 0
#define S3C_IRQTYPE_EINT 1
@@ -375,14 +376,17 @@ asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
/**
* s3c24xx_set_fiq - set the FIQ routing
* @irq: IRQ number to route to FIQ on processor.
+ * @ack_ptr: pointer to a location for storing the bit mask
* @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
*
* Change the state of the IRQ to FIQ routing depending on @irq and @on. If
* @on is true, the @irq is checked to see if it can be routed and the
* interrupt controller updated to route the IRQ. If @on is false, the FIQ
* routing is cleared, regardless of which @irq is specified.
+ *
+ * returns the mask value for the register.
*/
-int s3c24xx_set_fiq(unsigned int irq, bool on)
+int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on)
{
u32 intmod;
unsigned offs;
@@ -390,15 +394,18 @@ int s3c24xx_set_fiq(unsigned int irq, bool on)
if (on) {
offs = irq - FIQ_START;
if (offs > 31)
- return -EINVAL;
+ return 0;
intmod = 1 << offs;
} else {
intmod = 0;
}
+ if (ack_ptr)
+ *ack_ptr = intmod;
writel_relaxed(intmod, S3C2410_INTMOD);
- return 0;
+
+ return intmod;
}
EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
diff --git a/arch/arm/mach-s3c64xx/irq-uart.h b/arch/arm/mach-s3c/irq-uart-s3c64xx.h
index 78eccdce95a7..78eccdce95a7 100644
--- a/arch/arm/mach-s3c64xx/irq-uart.h
+++ b/arch/arm/mach-s3c/irq-uart-s3c64xx.h
diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/mach-s3c/keypad.h
index 9754b9a29945..9754b9a29945 100644
--- a/arch/arm/plat-samsung/include/plat/keypad.h
+++ b/arch/arm/mach-s3c/keypad.h
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c/mach-amlm5900.c
index 9a9daf526d0c..94c4512ace17 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c/mach-amlm5900.c
@@ -13,6 +13,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/platform_device.h>
@@ -26,28 +27,24 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
+#include "devs.h"
+#include "cpu.h"
+#include "gpio-cfg.h"
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
-#include <plat/samsung-time.h>
-
-#include "common.h"
+#include "s3c24xx.h"
static struct resource amlm5900_nor_resource =
DEFINE_RES_MEM(0x00000000, SZ_16M);
@@ -124,6 +121,19 @@ static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
}
};
+static struct gpiod_lookup_table amlm5900_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
static struct platform_device *amlm5900_devices[] __initdata = {
#ifdef CONFIG_FB_S3C2410
@@ -143,13 +153,13 @@ static void __init amlm5900_map_io(void)
{
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init amlm5900_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
#ifdef CONFIG_FB_S3C2410
@@ -180,13 +190,17 @@ static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
.gpccon = 0xaaaaaaaa,
.gpccon_mask = 0xffffffff,
+ .gpccon_reg = S3C2410_GPCCON,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
.gpdcon = 0xaaaaaaaa,
.gpdcon_mask = 0xffffffff,
+ .gpdcon_reg = S3C2410_GPDCON,
.gpdup = 0x0000ffff,
.gpdup_mask = 0xffffffff,
+ .gpdup_reg = S3C2410_GPDUP,
};
#endif
@@ -219,6 +233,7 @@ static void __init amlm5900_init(void)
s3c24xx_fb_set_platdata(&amlm5900_fb_info);
#endif
s3c_i2c0_set_platdata(NULL);
+ gpiod_add_lookup_table(&amlm5900_mmc_gpio_table);
platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
}
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c
index 072966dcad78..969b74079c8e 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c/mach-anubis.c
@@ -24,13 +24,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -41,13 +39,12 @@
#include <net/ax88796.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <plat/samsung-time.h>
#include "anubis.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "simtec.h"
#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
@@ -384,7 +381,7 @@ static void __init anubis_map_io(void)
{
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
/* check for the newer revision boards with large page nand */
@@ -403,7 +400,7 @@ static void __init anubis_map_io(void)
static void __init anubis_init_time(void)
{
s3c2440_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init anubis_init(void)
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c
index 0d3d5befb806..825714e9ac66 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c/mach-anw6410.c
@@ -30,24 +30,22 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
+#include "fb.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <mach/irqs.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/samsung-time.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include "common.h"
-#include "regs-modem.h"
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
/* DM9000 */
#define ANW6410_PA_DM9000 (0x18000000)
@@ -204,7 +202,7 @@ static void __init anw6410_map_io(void)
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
anw6410_lcd_mode_set();
}
@@ -228,6 +226,5 @@ MACHINE_START(ANW6410, "A&W6410")
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c
index 58c5ef3cf1d7..18ace34bbb85 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c/mach-at2440evb.c
@@ -24,14 +24,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
@@ -40,12 +38,11 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/mmc-s3cmci.h>
-#include <plat/samsung-time.h>
-#include "common.h"
+#include "s3c24xx.h"
static struct map_desc at2440evb_iodesc[] __initdata = {
/* Nothing here */
@@ -136,18 +133,26 @@ static struct platform_device at2440evb_device_eth = {
};
static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
- /* Intentionally left blank */
+ .set_power = s3c24xx_mci_def_set_power,
};
static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
.dev_id = "s3c2410-sdi",
.table = {
/* Card detect S3C2410_GPG(10) */
- GPIO_LOOKUP("GPG", 10, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
+
/* 7" LCD panel */
static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
@@ -197,13 +202,13 @@ static void __init at2440evb_map_io(void)
{
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init at2440evb_init_time(void)
{
s3c2440_init_clocks(16934400);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init at2440evb_init(void)
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c
index a7c3955ae8f6..ad3c7e209544 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c/mach-bast.c
@@ -40,20 +40,17 @@
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/samsung-time.h>
+#include <linux/platform_data/fb-s3c2410.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include "devs.h"
+#include "gpio-cfg.h"
#include "bast.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "simtec.h"
#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
@@ -550,13 +547,13 @@ static void __init bast_map_io(void)
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init bast_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init bast_init(void)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
index 34f1baa10c54..407ad493493e 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -27,7 +27,7 @@
#include <linux/platform_data/spi-s3c64xx.h>
-#include <plat/cpu.h>
+#include "cpu.h"
#include <mach/irqs.h>
#include "crag6410.h"
@@ -378,8 +378,7 @@ static const struct {
.i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
};
-static int wlf_gf_module_probe(struct i2c_client *i2c,
- const struct i2c_device_id *i2c_id)
+static int wlf_gf_module_probe(struct i2c_client *i2c)
{
int ret, i, j, id, rev;
@@ -432,7 +431,7 @@ static struct i2c_driver wlf_gf_module_driver = {
.driver = {
.name = "wlf-gf-module"
},
- .probe = wlf_gf_module_probe,
+ .probe_new = wlf_gf_module_probe,
.id_table = wlf_gf_module_id,
};
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index da9654255e3f..4a12c75d407f 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -44,30 +44,28 @@
#include <asm/mach-types.h>
#include <video/samsung_fimd.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <mach/irqs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/gpio-cfg.h>
+#include "fb.h"
+#include "sdhci.h"
+#include "gpio-cfg.h"
#include <linux/platform_data/spi-s3c64xx.h>
-#include <plat/keypad.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc.h>
+#include "keypad.h"
+#include "devs.h"
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
+#include "pm.h"
-#include "common.h"
+#include "s3c64xx.h"
#include "crag6410.h"
-#include "regs-gpio-memport.h"
-#include "regs-modem.h"
-#include "regs-sys.h"
+#include "regs-gpio-memport-s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
/* serial port setup */
@@ -750,7 +748,7 @@ static void __init crag6410_map_io(void)
s3c64xx_init_io(NULL, 0);
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
/* LCD type and Bypass set by bootloader */
}
@@ -877,6 +875,5 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c
index 594901f3b8e5..97a52fd6ded6 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c/mach-gta02.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
@@ -56,20 +57,18 @@
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "regs-irq.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
+#include "gpio-cfg.h"
+#include "pm.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "gta02.h"
static struct pcf50633 *gta02_pcf;
@@ -474,11 +473,39 @@ static struct platform_device gta02_buttons_device = {
},
};
+static struct gpiod_lookup_table gta02_audio_gpio_table = {
+ .dev_id = "neo1973-audio",
+ .table = {
+ GPIO_LOOKUP("GPIOJ", 2, "amp-shut", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOJ", 1, "hp", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct platform_device gta02_audio = {
+ .name = "neo1973-audio",
+ .id = -1,
+};
+
+static struct gpiod_lookup_table gta02_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init gta02_map_io(void)
{
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
@@ -498,6 +525,7 @@ static struct platform_device *gta02_devices[] __initdata = {
&gta02_buttons_device,
&s3c_device_adc,
&s3c_device_ts,
+ &gta02_audio,
};
static void gta02_poweroff(void)
@@ -524,6 +552,12 @@ static void __init gta02_machine_init(void)
i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
+ gpiod_add_lookup_table(&gta02_audio_gpio_table);
+ gpiod_add_lookup_table(&gta02_mmc_gpio_table);
platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
pm_power_off = gta02_poweroff;
@@ -533,7 +567,7 @@ static void __init gta02_machine_init(void)
static void __init gta02_init_time(void)
{
s3c2442_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
MACHINE_START(NEO1973_GTA02, "GTA02")
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c
index f4710052843a..53d51aa83200 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c/mach-h1940.c
@@ -47,20 +47,19 @@
#include <sound/uda1380.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
-
-#include "common.h"
+#include <linux/platform_data/fb-s3c2410.h>
+#include "map.h"
+#include "hardware-s3c24xx.h"
+#include "regs-clock.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "gpio-cfg.h"
+#include "pm.h"
+
+#include "s3c24xx.h"
#include "h1940.h"
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
@@ -180,9 +179,9 @@ static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
.cfg_gpio = s3c24xx_ts_cfg_gpio,
};
-/**
+/*
* Set lcd on or off
- **/
+ */
static struct s3c2410fb_display h1940_lcd __initdata = {
.lcdcon5= S3C2410_LCDCON5_FRM565 | \
S3C2410_LCDCON5_INVVLINE | \
@@ -211,12 +210,16 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
.lpcsel = 0x02,
.gpccon = 0xaa940659,
.gpccon_mask = 0xffffc0f0,
+ .gpccon_reg = S3C2410_GPCCON,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
.gpdcon = 0xaa84aaa0,
.gpdcon_mask = 0xffffffff,
+ .gpdcon_reg = S3C2410_GPDCON,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
+ .gpdup_reg = S3C2410_GPDUP,
};
static int power_supply_init(struct device *dev)
@@ -446,6 +449,8 @@ static struct platform_device h1940_device_bluetooth = {
static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
{
+ s3c24xx_mci_def_set_power(power_mode, vdd);
+
switch (power_mode) {
case MMC_POWER_OFF:
gpio_set_value(H1940_LATCH_SD_POWER, 0);
@@ -468,13 +473,36 @@ static struct gpiod_lookup_table h1940_mmc_gpio_table = {
.dev_id = "s3c2410-sdi",
.table = {
/* Card detect S3C2410_GPF(5) */
- GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
/* Write protect S3C2410_GPH(8) */
- GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
+static struct gpiod_lookup_table h1940_audio_gpio_table = {
+ .dev_id = "h1940-audio",
+ .table = {
+ GPIO_LOOKUP("H1940_LATCH",
+ H1940_LATCH_AUDIO_POWER - H1940_LATCH_GPIO(0),
+ "speaker-power", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOG", 4, "hp", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct platform_device h1940_audio = {
+ .name = "h1940-audio",
+ .id = -1,
+};
+
static struct pwm_lookup h1940_pwm_lookup[] = {
PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
PWM_POLARITY_NORMAL),
@@ -651,13 +679,14 @@ static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_ts,
&power_supply,
&h1940_battery,
+ &h1940_audio,
};
static void __init h1940_map_io(void)
{
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
/* setup PM */
@@ -674,7 +703,7 @@ static void __init h1940_map_io(void)
static void __init h1940_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
/* H1940 and RX3715 need to reserve this for suspend */
@@ -690,6 +719,10 @@ static void __init h1940_init(void)
s3c24xx_fb_set_platdata(&h1940_fb_info);
gpiod_add_lookup_table(&h1940_mmc_gpio_table);
+ gpiod_add_lookup_table(&h1940_audio_gpio_table);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c24xx_ts_set_platdata(&h1940_ts_cfg);
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c
index e7080215c624..c58cd1fa6981 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c/mach-hmt.c
@@ -25,23 +25,21 @@
#include <asm/mach/irq.h>
#include <video/samsung_fimd.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
-#include <plat/fb.h>
+#include "gpio-samsung.h"
+#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
+#include "s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
@@ -251,7 +249,7 @@ static void __init hmt_map_io(void)
s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
}
static void __init hmt_machine_init(void)
@@ -280,6 +278,5 @@ MACHINE_START(HMT, "Airgoo-HMT")
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c
index 885e8f12e4b9..94b16b2cb1da 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c/mach-jive.c
@@ -31,10 +31,10 @@
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/fb.h>
-#include <mach/gpio-samsung.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+#include <linux/platform_data/fb-s3c2410.h>
+#include "gpio-samsung.h"
#include <asm/mach-types.h>
@@ -43,14 +43,13 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <plat/samsung-time.h>
-#include "common.h"
+#include "s3c24xx.h"
#include "s3c2412-power.h"
static struct map_desc jive_iodesc[] __initdata = {
@@ -321,6 +320,7 @@ static struct s3c2410fb_mach_info jive_lcd_config = {
* data. */
.gpcup = (0xf << 1) | (0x3f << 10),
+ .gpcup_reg = S3C2410_GPCUP,
.gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE |
S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
@@ -334,8 +334,12 @@ static struct s3c2410fb_mach_info jive_lcd_config = {
S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+ .gpccon_reg = S3C2410_GPCCON,
+
.gpdup = (0x3f << 2) | (0x3f << 10),
+ .gpdup_reg = S3C2410_GPDUP,
+
.gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 |
S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 |
@@ -349,6 +353,8 @@ static struct s3c2410fb_mach_info jive_lcd_config = {
S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+ .gpdcon_reg = S3C2410_GPDCON,
};
/* ILI9320 support. */
@@ -523,13 +529,13 @@ static void __init jive_map_io(void)
{
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init jive_init_time(void)
{
s3c2412_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void jive_power_off(void)
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c
index 235749448311..0f4f2a940b5c 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c/mach-mini2440.c
@@ -30,15 +30,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-lcd.h>
#include <mach/irqs.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mmc-s3cmci.h>
@@ -49,14 +47,13 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
#include <sound/s3c24xx_uda134x.h>
-#include "common.h"
+#include "s3c24xx.h"
#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
@@ -215,6 +212,9 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
+ .gpccon_reg = S3C2410_GPCCON,
+ .gpcup_reg = S3C2410_GPCUP,
+
.gpdup = (0x3f << 2) | (0x3f << 10),
.gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 |
@@ -230,13 +230,16 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
+
+ .gpdcon_reg = S3C2410_GPDCON,
+ .gpdup_reg = S3C2410_GPDUP,
};
/* MMC/SD */
static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
.wprotect_invert = 1,
- .set_power = NULL,
+ .set_power = s3c24xx_mci_def_set_power,
.ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
};
@@ -244,9 +247,16 @@ static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
.dev_id = "s3c2410-sdi",
.table = {
/* Card detect S3C2410_GPG(8) */
- GPIO_LOOKUP("GPG", 8, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOG", 8, "cd", GPIO_ACTIVE_LOW),
/* Write protect S3C2410_GPH(8) */
- GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_HIGH),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
@@ -587,13 +597,13 @@ static void __init mini2440_map_io(void)
{
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init mini2440_init_time(void)
{
s3c2440_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
/*
@@ -716,6 +726,11 @@ static void __init mini2440_init(void)
s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
}
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
if (features.lcd_index != -1) {
int li;
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c
index 0dd36ae49e6a..75f2ec4a2993 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c/mach-mini6410.c
@@ -23,27 +23,26 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/adc.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include <linux/soc/samsung/s3c-adc.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/sdhci.h>
+#include "sdhci.h"
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <mach/irqs.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
-#include <plat/samsung-time.h>
-#include "common.h"
-#include "regs-modem.h"
-#include "regs-srom.h"
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -238,7 +237,7 @@ static void __init mini6410_map_io(void)
s3c64xx_init_io(NULL, 0);
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
@@ -362,6 +361,5 @@ MACHINE_START(MINI6410, "MINI6410")
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c
index 998ccff3c174..e40c1fcf418c 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c/mach-n30.c
@@ -27,15 +27,15 @@
#include <linux/io.h>
#include <linux/mmc/host.h>
-#include <mach/hardware.h>
+#include "hardware-s3c24xx.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
@@ -43,14 +43,12 @@
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
+#include "cpu.h"
+#include "devs.h"
#include <linux/platform_data/mmc-s3cmci.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <plat/samsung-time.h>
-#include "common.h"
+#include "s3c24xx.h"
static struct map_desc n30_iodesc[] __initdata = {
/* nothing here yet */
@@ -368,6 +366,8 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
{
+ s3c24xx_mci_def_set_power(power_mode, vdd);
+
switch (power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
@@ -389,10 +389,17 @@ static struct gpiod_lookup_table n30_mci_gpio_table = {
.dev_id = "s3c2410-sdi",
.table = {
/* Card detect S3C2410_GPF(1) */
- GPIO_LOOKUP("GPF", 1, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOF", 1, "cd", GPIO_ACTIVE_LOW),
/* Write protect S3C2410_GPG(10) */
- GPIO_LOOKUP("GPG", 10, "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOG", 10, "wp", GPIO_ACTIVE_LOW),
{ },
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
},
};
@@ -572,13 +579,13 @@ static void __init n30_map_io(void)
s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
n30_hwinit();
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init n30_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
/* GPB3 is the line that controls the pull-up for the USB D+ line */
@@ -600,6 +607,10 @@ static void __init n30_init(void)
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
if (machine_is_n30()) {
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c
index 13fea5c86ca3..1a45bed56622 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c/mach-ncp.c
@@ -25,20 +25,18 @@
#include <asm/mach/irq.h>
#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
+#include "fb.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
+#include "s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
@@ -81,7 +79,7 @@ static void __init ncp_map_io(void)
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
}
static void __init ncp_machine_init(void)
@@ -98,6 +96,5 @@ MACHINE_START(NCP, "NCP")
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c/mach-nexcoder.c
index c2f34758ccb6..2a454c919658 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c/mach-nexcoder.c
@@ -28,21 +28,19 @@
#include <asm/mach/irq.h>
#include <asm/setup.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
+#include "s3c24xx.h"
static struct map_desc nexcoder_iodesc[] __initdata = {
/* nothing here yet */
@@ -131,7 +129,7 @@ static void __init nexcoder_map_io(void)
{
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
nexcoder_sensorboard_init();
}
@@ -139,12 +137,17 @@ static void __init nexcoder_map_io(void)
static void __init nexcoder_init_time(void)
{
s3c2440_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init nexcoder_init(void)
{
s3c_i2c0_set_platdata(NULL);
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
};
diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c/mach-osiris-dvs.c
index 5d819b6ea428..2e283aedab65 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ b/arch/arm/mach-s3c/mach-osiris-dvs.c
@@ -14,8 +14,8 @@
#include <linux/mfd/tps65010.h>
-#include <plat/cpu-freq.h>
-#include <mach/gpio-samsung.h>
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include "gpio-samsung.h"
#define OSIRIS_GPIO_DVS S3C2410_GPB(5)
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c/mach-osiris.c
index ee3630cb236a..4e94683fff3d 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c/mach-osiris.c
@@ -36,20 +36,17 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/samsung-time.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
-
-#include "common.h"
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-cpu-freq.h>
+#include "devs.h"
+#include "gpio-cfg.h"
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "s3c24xx.h"
#include "osiris.h"
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
/* onboard perihperal map */
@@ -359,7 +356,7 @@ static void __init osiris_map_io(void)
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
/* check for the newer revision boards with large page nand */
@@ -384,7 +381,7 @@ static void __init osiris_map_io(void)
static void __init osiris_init_time(void)
{
s3c2440_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init osiris_init(void)
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c/mach-otom.c
index 4e24d89e870b..460ee97766cd 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c/mach-otom.c
@@ -22,14 +22,13 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "otom.h"
static struct map_desc otom11_iodesc[] __initdata = {
@@ -95,18 +94,22 @@ static void __init otom11_map_io(void)
{
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init otom11_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init otom11_init(void)
{
s3c_i2c0_set_platdata(NULL);
+
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
}
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c/mach-qt2410.c
index ff9e3197309b..9a4212ea07db 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c/mach-qt2410.c
@@ -28,26 +28,23 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-lcd.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
@@ -225,6 +222,20 @@ static struct gpiod_lookup_table qt2410_spi_gpiod_table = {
},
};
+static struct gpiod_lookup_table qt2410_mmc_gpiod_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
/* Board devices */
static struct platform_device *qt2410_devices[] __initdata = {
@@ -309,13 +320,13 @@ static void __init qt2410_map_io(void)
{
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init qt2410_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init qt2410_machine_init(void)
@@ -343,9 +354,13 @@ static void __init qt2410_machine_init(void)
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
gpiod_add_lookup_table(&qt2410_led_gpio_table);
+ gpiod_add_lookup_table(&qt2410_mmc_gpiod_table);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
s3c_pm_init();
}
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c
index 0ff88b6859c4..147e660647ba 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c/mach-real6410.c
@@ -24,25 +24,24 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <mach/irqs.h>
-#include <plat/adc.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
+#include <linux/soc/samsung/s3c-adc.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
-#include <plat/samsung-time.h>
-#include "common.h"
-#include "regs-modem.h"
-#include "regs-srom.h"
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -208,7 +207,7 @@ static void __init real6410_map_io(void)
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
@@ -330,6 +329,5 @@ MACHINE_START(REAL6410, "REAL6410")
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
index fde98b175c75..4df7a54ad7e4 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c/mach-rx1950.c
@@ -42,21 +42,20 @@
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <sound/uda1380.h>
-#include <mach/fb.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
-#include <plat/gpio-cfg.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "gpio-cfg.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "h1940.h"
#define LCD_PWM_PERIOD 192960
@@ -361,14 +360,17 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
.lpcsel = 0x02,
.gpccon = 0xaa9556a9,
.gpccon_mask = 0xffc003fc,
+ .gpccon_reg = S3C2410_GPCCON,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
.gpdcon = 0xaa90aaa1,
.gpdcon_mask = 0xffc0fff0,
+ .gpdcon_reg = S3C2410_GPDCON,
.gpdup = 0x0000fcfd,
.gpdup_mask = 0xffffffff,
-
+ .gpdup_reg = S3C2410_GPDUP,
};
static struct pwm_lookup rx1950_pwm_lookup[] = {
@@ -549,6 +551,8 @@ static struct platform_device rx1950_backlight = {
static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
{
+ s3c24xx_mci_def_set_power(power_mode, vdd);
+
switch (power_mode) {
case MMC_POWER_OFF:
gpio_direction_output(S3C2410_GPJ(1), 0);
@@ -571,9 +575,16 @@ static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
.dev_id = "s3c2410-sdi",
.table = {
/* Card detect S3C2410_GPF(5) */
- GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
/* Write protect S3C2410_GPH(8) */
- GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
{ },
},
};
@@ -728,6 +739,20 @@ static struct i2c_board_info rx1950_i2c_devices[] = {
},
};
+static struct gpiod_lookup_table rx1950_audio_gpio_table = {
+ .dev_id = "rx1950-audio",
+ .table = {
+ GPIO_LOOKUP("GPIOG", 12, "hp-gpio", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("GPIOA", 1, "speaker-power", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct platform_device rx1950_audio = {
+ .name = "rx1950-audio",
+ .id = -1,
+};
+
static struct platform_device *rx1950_devices[] __initdata = {
&s3c2410_device_dclk,
&s3c_device_lcd,
@@ -746,13 +771,14 @@ static struct platform_device *rx1950_devices[] __initdata = {
&power_supply,
&rx1950_battery,
&rx1950_leds,
+ &rx1950_audio,
};
static void __init rx1950_map_io(void)
{
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
/* setup PM */
@@ -766,7 +792,7 @@ static void __init rx1950_map_io(void)
static void __init rx1950_init_time(void)
{
s3c2442_init_clocks(16934000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init rx1950_init_machine(void)
@@ -813,6 +839,10 @@ static void __init rx1950_init_machine(void)
gpio_direction_output(S3C2410_GPJ(6), 0);
pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
+ gpiod_add_lookup_table(&rx1950_audio_gpio_table);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
i2c_register_board_info(0, rx1950_i2c_devices,
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c/mach-rx3715.c
index 995f1ff34a1b..889e44d86586 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c/mach-rx3715.c
@@ -30,22 +30,20 @@
#include <asm/mach/map.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/fb.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "h1940.h"
static struct map_desc rx3715_iodesc[] __initdata = {
@@ -125,13 +123,17 @@ static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
.gpccon = 0xaa955699,
.gpccon_mask = 0xffc003cc,
+ .gpccon_reg = S3C2410_GPCCON,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
+ .gpcup_reg = S3C2410_GPCUP,
.gpdcon = 0xaa95aaa1,
.gpdcon_mask = 0xffc0fff0,
+ .gpdcon_reg = S3C2410_GPDCON,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
+ .gpdup_reg = S3C2410_GPDUP,
};
static struct mtd_partition __initdata rx3715_nand_part[] = {
@@ -174,13 +176,13 @@ static void __init rx3715_map_io(void)
{
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init rx3715_init_time(void)
{
s3c2440_init_clocks(16934000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
/* H1940 and RX3715 need to reserve this for suspend */
@@ -199,6 +201,9 @@ static void __init rx3715_init_machine(void)
s3c_nand_set_platdata(&rx3715_nand_info);
s3c24xx_fb_set_platdata(&rx3715_fb_info);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
}
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c/mach-s3c2416-dt.c
index aa7102713b37..418544d3015d 100644
--- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
+++ b/arch/arm/mach-s3c/mach-s3c2416-dt.c
@@ -16,12 +16,12 @@
#include <linux/serial_s3c.h>
#include <asm/mach/arch.h>
-#include <mach/map.h>
+#include "map.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "pm.h"
-#include "common.h"
+#include "s3c24xx.h"
static void __init s3c2416_dt_map_io(void)
{
diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c/mach-s3c64xx-dt.c
index 1724f5ea5c46..00169c103862 100644
--- a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
+++ b/arch/arm/mach-s3c/mach-s3c64xx-dt.c
@@ -8,11 +8,10 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <plat/cpu.h>
-#include <mach/map.h>
+#include "cpu.h"
+#include "map.h"
-#include "common.h"
-#include "watchdog-reset.h"
+#include "s3c64xx.h"
/*
* IO mapping for shared system controller IP.
@@ -39,20 +38,6 @@ static void __init s3c64xx_dt_map_io(void)
panic("SoC is not S3C64xx!");
}
-static void __init s3c64xx_dt_init_machine(void)
-{
- samsung_wdt_reset_of_init();
-}
-
-static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode != REBOOT_SOFT)
- samsung_wdt_reset();
-
- /* if all else fails, or mode was for soft, jump to 0 */
- soft_restart(0);
-}
-
static const char *const s3c64xx_dt_compat[] __initconst = {
"samsung,s3c6400",
"samsung,s3c6410",
@@ -63,6 +48,4 @@ DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
/* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
.dt_compat = s3c64xx_dt_compat,
.map_io = s3c64xx_dt_map_io,
- .init_machine = s3c64xx_dt_init_machine,
- .restart = s3c64xx_dt_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c/mach-smartq.c
index 5025db607c0f..5b6e7c2a85ef 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c/mach-smartq.c
@@ -18,25 +18,24 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
+#include "cpu.h"
+#include "devs.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
+#include "gpio-cfg.h"
#include <linux/platform_data/hwmon-s3c.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/sdhci.h>
+#include "sdhci.h"
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
-#include <plat/samsung-time.h>
-#include "common.h"
+#include "s3c64xx.h"
#include "mach-smartq.h"
-#include "regs-modem.h"
+#include "regs-modem-s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
@@ -384,7 +383,7 @@ void __init smartq_map_io(void)
s3c64xx_set_xtal_freq(12000000);
s3c64xx_set_xusbxti_freq(12000000);
s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
smartq_lcd_mode_set();
}
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.h b/arch/arm/mach-s3c/mach-smartq.h
index f98132f4f430..f98132f4f430 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.h
+++ b/arch/arm/mach-s3c/mach-smartq.h
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c
index 44e9edb144fa..8c940227e810 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c/mach-smartq5.c
@@ -15,17 +15,16 @@
#include <video/samsung_fimd.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
+#include "gpio-cfg.h"
-#include "common.h"
+#include "s3c64xx.h"
#include "mach-smartq.h"
static struct gpio_led smartq5_leds[] = {
@@ -151,6 +150,5 @@ MACHINE_START(SMARTQ5, "SmartQ 5")
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c
index 815ee7d0b5e3..ab243969d6d0 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c/mach-smartq7.c
@@ -15,17 +15,16 @@
#include <video/samsung_fimd.h>
#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
+#include "fb.h"
+#include "gpio-cfg.h"
-#include "common.h"
+#include "s3c64xx.h"
#include "mach-smartq.h"
static struct gpio_led smartq7_leds[] = {
@@ -167,6 +166,5 @@ MACHINE_START(SMARTQ7, "SmartQ 7")
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c/mach-smdk2410.c
index 18dfef52c8bf..ca83d5a7d101 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c/mach-smdk2410.c
@@ -19,23 +19,23 @@
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
@@ -81,19 +81,22 @@ static void __init smdk2410_map_io(void)
{
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init smdk2410_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init smdk2410_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
smdk_machine_init();
}
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c
index ca80167f268d..c43095b321d7 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c/mach-smdk2413.c
@@ -23,27 +23,26 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc smdk2413_iodesc[] __initdata = {
};
@@ -99,13 +98,13 @@ static void __init smdk2413_map_io(void)
{
s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init smdk2413_init_time(void)
{
s3c2412_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init smdk2413_machine_init(void)
@@ -119,6 +118,9 @@ static void __init smdk2413_machine_init(void)
s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
s3c_i2c0_set_platdata(NULL);
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
smdk_machine_init();
@@ -132,7 +134,7 @@ MACHINE_START(S3C2413, "S3C2413")
.init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = s3c24xx_timer_init,
MACHINE_END
MACHINE_START(SMDK2412, "SMDK2412")
@@ -143,7 +145,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
.init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = s3c24xx_timer_init,
MACHINE_END
MACHINE_START(SMDK2413, "SMDK2413")
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c/mach-smdk2416.c
index 61c3e45898d3..4d883a792cc6 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c/mach-smdk2416.c
@@ -25,31 +25,29 @@
#include <asm/mach/irq.h>
#include <video/samsung_fimd.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/gpio-samsung.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
+#include "regs-s3c2443-clock.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "gpio-cfg.h"
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/sdhci.h>
+#include "sdhci.h"
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
-#include <plat/samsung-time.h>
-#include <plat/fb.h>
+#include "fb.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc smdk2416_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -215,14 +213,14 @@ static struct platform_device *smdk2416_devices[] __initdata = {
static void __init smdk2416_init_time(void)
{
s3c2416_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init smdk2416_map_io(void)
{
s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init smdk2416_machine_init(void)
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c/mach-smdk2440.c
index 7bafcd8ea104..7f6fe0db04f3 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c/mach-smdk2440.c
@@ -23,22 +23,21 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -137,6 +136,11 @@ static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
.gpdcon_mask = 0xffffffff,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
+
+ .gpccon_reg = S3C2410_GPCCON,
+ .gpcup_reg = S3C2410_GPCUP,
+ .gpdcon_reg = S3C2410_GPDCON,
+ .gpdup_reg = S3C2410_GPDUP,
#endif
.lpcsel = ((0xCE6) & ~7) | 1<<4,
@@ -154,20 +158,22 @@ static void __init smdk2440_map_io(void)
{
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init smdk2440_init_time(void)
{
s3c2440_init_clocks(16934400);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init smdk2440_machine_init(void)
{
s3c24xx_fb_set_platdata(&smdk2440_fb_info);
s3c_i2c0_set_platdata(NULL);
-
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
smdk_machine_init();
}
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c/mach-smdk2443.c
index 2358ed5ed7be..fc54c91ade56 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c/mach-smdk2443.c
@@ -22,22 +22,19 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
+#include "regs-gpio.h"
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
-#include "common-smdk.h"
+#include "s3c24xx.h"
+#include "common-smdk-s3c24xx.h"
static struct map_desc smdk2443_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -112,13 +109,13 @@ static void __init smdk2443_map_io(void)
{
s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init smdk2443_init_time(void)
{
s3c2443_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init smdk2443_machine_init(void)
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c
index cbd16843c7d1..827221398d6c 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c/mach-smdk6400.c
@@ -23,16 +23,14 @@
#include <asm/mach/irq.h>
#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/gpio-samsung.h>
-#include <plat/samsung-time.h>
+#include "gpio-samsung.h"
-#include "common.h"
+#include "s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -62,7 +60,7 @@ static void __init smdk6400_map_io(void)
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
}
static struct platform_device *smdk6400_devices[] __initdata = {
@@ -88,6 +86,5 @@ MACHINE_START(SMDK6400, "SMDK6400")
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c
index 56f406c0c3dd..ae18c1375c9c 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c/mach-smdk6410.c
@@ -45,32 +45,30 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/map.h>
+#include "map.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
+#include "fb.h"
+#include "gpio-cfg.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc.h>
+#include "devs.h"
+#include "cpu.h"
+#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/keypad.h>
-#include <plat/samsung-time.h>
+#include "keypad.h"
-#include "backlight.h"
-#include "common.h"
-#include "regs-modem.h"
-#include "regs-srom.h"
-#include "regs-sys.h"
+#include "backlight-s3c64xx.h"
+#include "s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-srom-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -635,7 +633,7 @@ static void __init smdk6410_map_io(void)
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
/* set the LCD type */
@@ -704,6 +702,5 @@ MACHINE_START(SMDK6410, "SMDK6410")
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
- .init_time = samsung_timer_init,
- .restart = s3c64xx_restart,
+ .init_time = s3c64xx_timer_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c/mach-tct_hammer.c
index 8d8ddd6ea305..2a61df316e8c 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c/mach-tct_hammer.c
@@ -7,6 +7,7 @@
// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
// Ben Dooks <ben@simtec.co.uk>
+#include <linux/gpio/machine.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -24,21 +25,19 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
+#include "devs.h"
+#include "cpu.h"
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
-#include <plat/samsung-time.h>
-#include "common.h"
+#include "s3c24xx.h"
static struct resource tct_hammer_nor_resource =
DEFINE_RES_MEM(0x00000000, SZ_16M);
@@ -103,6 +102,19 @@ static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
}
};
+static struct gpiod_lookup_table tct_hammer_mmc_gpio_table = {
+ .dev_id = "s3c2410-sdi",
+ .table = {
+ /* bus pins */
+ GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
static struct platform_device *tct_hammer_devices[] __initdata = {
&s3c_device_adc,
@@ -119,18 +131,19 @@ static void __init tct_hammer_map_io(void)
{
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init tct_hammer_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init tct_hammer_init(void)
{
s3c_i2c0_set_platdata(NULL);
+ gpiod_add_lookup_table(&tct_hammer_mmc_gpio_table);
platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
}
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c/mach-vr1000.c
index 6a3fb2becc7c..5c3d07cf2e79 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c/mach-vr1000.c
@@ -35,17 +35,15 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/samsung-time.h>
+#include "cpu.h"
+#include "devs.h"
#include "bast.h"
-#include "common.h"
+#include "s3c24xx.h"
#include "simtec.h"
#include "vr1000.h"
@@ -328,13 +326,13 @@ static void __init vr1000_map_io(void)
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init vr1000_init_time(void)
{
s3c2410_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init vr1000_init(void)
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c/mach-vstms.c
index d76b28b65e65..0a67641e5218 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c/mach-vstms.c
@@ -24,24 +24,23 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
-#include <mach/fb.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/samsung-time.h>
+#include "devs.h"
+#include "cpu.h"
-#include "common.h"
+#include "s3c24xx.h"
static struct map_desc vstms_iodesc[] __initdata = {
};
@@ -136,20 +135,22 @@ static void __init vstms_map_io(void)
{
s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+ s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
}
static void __init vstms_init_time(void)
{
s3c2412_init_clocks(12000000);
- samsung_timer_init();
+ s3c24xx_timer_init();
}
static void __init vstms_init(void)
{
s3c_i2c0_set_platdata(NULL);
s3c_nand_set_platdata(&vstms_nand_info);
-
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
}
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/mach-s3c/map-s3c.h
index 4244acbf4b65..a18fdd3d6ae2 100644
--- a/arch/arm/plat-samsung/include/plat/map-s3c.h
+++ b/arch/arm/mach-s3c/map-s3c.h
@@ -9,6 +9,8 @@
#ifndef __ASM_PLAT_MAP_S3C_H
#define __ASM_PLAT_MAP_S3C_H __FILE__
+#include "map.h"
+
#define S3C24XX_VA_IRQ S3C_VA_IRQ
#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
#define S3C24XX_VA_UART S3C_VA_UART
@@ -45,16 +47,8 @@
#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
-/*
- * ISA style IO, for each machine to sort out mappings for,
- * if it implements it. We reserve two 16M regions for ISA.
- */
-
#define S3C2410_ADDR(x) S3C_ADDR(x)
-#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
-
/* deal with the registers that move under the 2412/2413 */
#if defined(CONFIG_CPU_S3C2412)
@@ -71,6 +65,6 @@ extern void __iomem *s3c24xx_va_gpio2;
#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
#endif
-#include <plat/map-s5p.h>
+#include "map-s5p.h"
#endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c/map-s3c24xx.h
index bca93112f57d..b5dba78a9dd7 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c/map-s3c24xx.h
@@ -9,8 +9,8 @@
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
+#include <mach/map-base.h>
+#include "map-s3c.h"
/*
* interrupt controller is the first thing we put in, to make
@@ -86,6 +86,8 @@
#define S3C2410_PA_SPI (0x59000000)
#define S3C2443_PA_SPI0 (0x52000000)
#define S3C2443_PA_SPI1 S3C2410_PA_SPI
+#define S3C2410_SPI1 (0x20)
+#define S3C2412_SPI1 (0x100)
/* SDI */
#define S3C2410_PA_SDI (0x5A000000)
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c/map-s3c64xx.h
index 9372a535b7ba..d7740d2a77c4 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c/map-s3c64xx.h
@@ -11,8 +11,8 @@
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H __FILE__
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
+#include <mach/map-base.h>
+#include "map-s3c.h"
/*
* Post-mux Chip Select Regions Xm0CSn_
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/mach-s3c/map-s5p.h
index d69a0ca09fb5..cd237924e34d 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/mach-s3c/map-s5p.h
@@ -9,14 +9,12 @@
#ifndef __ASM_PLAT_MAP_S5P_H
#define __ASM_PLAT_MAP_S5P_H __FILE__
-#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
-
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#define VA_VIC1 VA_VIC(1)
#define VA_VIC2 VA_VIC(2)
#define VA_VIC3 VA_VIC(3)
-#include <plat/map-s3c.h>
+#include "map-s3c.h"
#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/mach-s3c/map.h b/arch/arm/mach-s3c/map.h
new file mode 100644
index 000000000000..7cfb517d4886
--- /dev/null
+++ b/arch/arm/mach-s3c/map.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "map-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "map-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/nand-core.h b/arch/arm/mach-s3c/nand-core-s3c24xx.h
index 8de633d416ae..a14316729c48 100644
--- a/arch/arm/mach-s3c24xx/nand-core.h
+++ b/arch/arm/mach-s3c/nand-core-s3c24xx.h
@@ -6,8 +6,8 @@
* S3C - Nand Controller core functions
*/
-#ifndef __ASM_ARCH_NAND_CORE_H
-#define __ASM_ARCH_NAND_CORE_H __FILE__
+#ifndef __ASM_ARCH_NAND_CORE_S3C24XX_H
+#define __ASM_ARCH_NAND_CORE_S3C24XX_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
@@ -21,4 +21,4 @@ static inline void s3c_nand_setname(char *name)
#endif
}
-#endif /* __ASM_ARCH_NAND_CORE_H */
+#endif /* __ASM_ARCH_NAND_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c64xx/onenand-core.h b/arch/arm/mach-s3c/onenand-core-s3c64xx.h
index 0cf6b5e76b24..e2dfdd1fec93 100644
--- a/arch/arm/mach-s3c64xx/onenand-core.h
+++ b/arch/arm/mach-s3c/onenand-core-s3c64xx.h
@@ -7,8 +7,8 @@
* Samsung OneNAD Controller core functions
*/
-#ifndef __ASM_ARCH_ONENAND_CORE_H
-#define __ASM_ARCH_ONENAND_CORE_H __FILE__
+#ifndef __ASM_ARCH_ONENAND_CORE_S3C64XX_H
+#define __ASM_ARCH_ONENAND_CORE_S3C64XX_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
@@ -29,4 +29,4 @@ static inline void s3c64xx_onenand1_setname(char *name)
#endif
}
-#endif /* __ASM_ARCH_ONENAND_CORE_H */
+#endif /* __ASM_ARCH_ONENAND_CORE_S3C64XX_H */
diff --git a/arch/arm/mach-s3c24xx/osiris.h b/arch/arm/mach-s3c/osiris.h
index b6c9c5ed2ba7..b6c9c5ed2ba7 100644
--- a/arch/arm/mach-s3c24xx/osiris.h
+++ b/arch/arm/mach-s3c/osiris.h
diff --git a/arch/arm/mach-s3c24xx/otom.h b/arch/arm/mach-s3c/otom.h
index c800f67d03d4..c800f67d03d4 100644
--- a/arch/arm/mach-s3c24xx/otom.h
+++ b/arch/arm/mach-s3c/otom.h
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c/pl080.c
index 152edbeea0c7..4730f080c736 100644
--- a/arch/arm/mach-s3c64xx/pl080.c
+++ b/arch/arm/mach-s3c/pl080.c
@@ -10,11 +10,11 @@
#include <linux/amba/pl08x.h>
#include <linux/of.h>
-#include <plat/cpu.h>
+#include "cpu.h"
#include <mach/irqs.h>
-#include <mach/map.h>
+#include "map.h"
-#include "regs-sys.h"
+#include "regs-sys-s3c64xx.h"
static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
{
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/mach-s3c/platformdata.c
index cbc3b4b45c74..e643c81aef45 100644
--- a/arch/arm/plat-samsung/platformdata.c
+++ b/arch/arm/mach-s3c/platformdata.c
@@ -9,8 +9,8 @@
#include <linux/string.h>
#include <linux/platform_device.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
+#include "devs.h"
+#include "sdhci.h"
void __init *s3c_set_platdata(void *pd, size_t pdsize,
struct platform_device *pdev)
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c/pll-s3c2410.c
index 0561f79ddce8..3fbc99eaa4a2 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2410.c
+++ b/arch/arm/mach-s3c/pll-s3c2410.c
@@ -15,8 +15,8 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
/* This array should be sorted in ascending order of the frequencies */
static struct cpufreq_frequency_table pll_vals_12MHz[] = {
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c/pll-s3c2440-12000000.c
index 2ec3a2f9a6a5..fdb8e8c2fe3b 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
+++ b/arch/arm/mach-s3c/pll-s3c2440-12000000.c
@@ -13,8 +13,8 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
/* This array should be sorted in ascending order of the frequencies */
static struct cpufreq_frequency_table s3c2440_plls_12[] = {
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c/pll-s3c2440-16934400.c
index 4b3d9e36c6bb..438b6fc099a4 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
+++ b/arch/arm/mach-s3c/pll-s3c2440-16934400.c
@@ -13,8 +13,8 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
/* This array should be sorted in ascending order of the frequencies */
static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
diff --git a/arch/arm/plat-samsung/pm-common.c b/arch/arm/mach-s3c/pm-common.c
index 59a10c6dcba1..618bd4499cae 100644
--- a/arch/arm/plat-samsung/pm-common.c
+++ b/arch/arm/mach-s3c/pm-common.c
@@ -12,7 +12,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
-#include <plat/pm-common.h>
+#include "pm-common.h"
/* helper functions to save and restore register state */
@@ -55,6 +55,8 @@ void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
/**
* s3c_pm_do_restore_core() - early restore register values from save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
*
* This is similar to s3c_pm_do_restore() except we try and minimise the
* side effects of the function in case registers that hardware might need
diff --git a/arch/arm/mach-s3c/pm-common.h b/arch/arm/mach-s3c/pm-common.h
new file mode 100644
index 000000000000..18b9607e1e39
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-common.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Tomasz Figa <t.figa@samsung.com>
+ * Copyright (c) 2004 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Written by Ben Dooks, <ben@simtec.co.uk>
+ */
+
+#ifndef __PLAT_SAMSUNG_PM_COMMON_H
+#define __PLAT_SAMSUNG_PM_COMMON_H __FILE__
+
+#include <linux/irq.h>
+#include <linux/soc/samsung/s3c-pm.h>
+
+/* sleep save info */
+
+/**
+ * struct sleep_save - save information for shared peripherals.
+ * @reg: Pointer to the register to save.
+ * @val: Holder for the value saved from reg.
+ *
+ * This describes a list of registers which is used by the pm core and
+ * other subsystem to save and restore register values over suspend.
+ */
+struct sleep_save {
+ void __iomem *reg;
+ unsigned long val;
+};
+
+#define SAVE_ITEM(x) \
+ { .reg = (x) }
+
+/* helper functions to save/restore lists of registers. */
+
+extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
+
+#endif
diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/arch/arm/mach-s3c/pm-core-s3c24xx.h
index 5e4ce89d0158..bcb7978a4e85 100644
--- a/arch/arm/mach-s3c24xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c/pm-core-s3c24xx.h
@@ -11,10 +11,12 @@
#include <linux/io.h>
#include "regs-clock.h"
-#include "regs-irq.h"
+#include "regs-irq-s3c24xx.h"
+#include <mach/irqs.h>
static inline void s3c_pm_debug_init_uart(void)
{
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
unsigned long tmp = __raw_readl(S3C2410_CLKCON);
/* re-start uart clocks */
@@ -24,6 +26,7 @@ static inline void s3c_pm_debug_init_uart(void)
__raw_writel(tmp, S3C2410_CLKCON);
udelay(10);
+#endif
}
static inline void s3c_pm_arch_prepare_irqs(void)
@@ -75,11 +78,6 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
s3c_irqwake_eintmask);
}
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save)
-{
-}
-
static inline void s3c_pm_restored_gpios(void) { }
static inline void samsung_pm_saved_gpios(void) { }
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c/pm-core-s3c64xx.h
index bbf79ed28583..06f564e5cf63 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c/pm-core-s3c64xx.h
@@ -14,12 +14,13 @@
#include <linux/serial_s3c.h>
#include <linux/delay.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/map.h>
+#include "regs-gpio.h"
+#include "regs-clock.h"
+#include "map.h"
static inline void s3c_pm_debug_init_uart(void)
{
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
u32 tmp = __raw_readl(S3C_PCLK_GATE);
/* As a note, since the S3C64XX UARTs generally have multiple
@@ -35,6 +36,7 @@ static inline void s3c_pm_debug_init_uart(void)
__raw_writel(tmp, S3C_PCLK_GATE);
udelay(10);
+#endif
}
static inline void s3c_pm_arch_prepare_irqs(void)
@@ -63,48 +65,6 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
#define s3c_irqwake_intallow 0
#endif
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save)
-{
- u32 ucon = __raw_readl(regs + S3C2410_UCON);
- u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
- u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
- u32 new_ucon;
- u32 delta;
-
- /* S3C64XX UART blocks only support level interrupts, so ensure that
- * when we restore unused UART blocks we force the level interrupt
- * settigs. */
- save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
- /* We have a constraint on changing the clock type of the UART
- * between UCLKx and PCLK, so ensure that when we restore UCON
- * that the CLK field is correctly modified if the bootloader
- * has changed anything.
- */
- if (ucon_clk != save_clk) {
- new_ucon = save->ucon;
- delta = ucon_clk ^ save_clk;
-
- /* change from UCLKx => wrong PCLK,
- * either UCLK can be tested for by a bit-test
- * with UCLK0 */
- if (ucon_clk & S3C6400_UCON_UCLK0 &&
- !(save_clk & S3C6400_UCON_UCLK0) &&
- delta & S3C6400_UCON_PCLK2) {
- new_ucon &= ~S3C6400_UCON_UCLK0;
- } else if (delta == S3C6400_UCON_PCLK2) {
- /* as an precaution, don't change from
- * PCLK2 => PCLK or vice-versa */
- new_ucon ^= S3C6400_UCON_PCLK2;
- }
-
- S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
- ucon, new_ucon, save->ucon);
- save->ucon = new_ucon;
- }
-}
-
static inline void s3c_pm_restored_gpios(void)
{
/* ensure sleep mode has been cleared from the system */
diff --git a/arch/arm/mach-s3c/pm-core.h b/arch/arm/mach-s3c/pm-core.h
new file mode 100644
index 000000000000..b0e1d277f599
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-core.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "pm-core-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "pm-core-s3c64xx.h"
+#endif
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/mach-s3c/pm-gpio.c
index cb2e3bc79336..cfdbc2337998 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/mach-s3c/pm-gpio.c
@@ -13,10 +13,10 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
-#include <plat/gpio-core.h>
-#include <plat/pm.h>
+#include "gpio-core.h"
+#include "pm.h"
/* PM GPIO helpers */
diff --git a/arch/arm/mach-s3c24xx/pm-h1940.S b/arch/arm/mach-s3c/pm-h1940.S
index a7bbe336ac6b..3bf6685123cb 100644
--- a/arch/arm/mach-s3c24xx/pm-h1940.S
+++ b/arch/arm/mach-s3c/pm-h1940.S
@@ -7,10 +7,9 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
.text
.global h1940_pm_return
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c/pm-s3c2410.c
index 2d8ea701380a..a66419883735 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2410.c
+++ b/arch/arm/mach-s3c/pm-s3c2410.c
@@ -16,13 +16,12 @@
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
-#include <plat/gpio-cfg.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "cpu.h"
+#include "pm.h"
#include "h1940.h"
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c/pm-s3c2412.c
index 2dfdaab0aa1f..6a9604477c9e 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c/pm-s3c2412.c
@@ -19,14 +19,14 @@
#include <asm/cacheflush.h>
#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
+#include <mach/irqs.h>
+#include "regs-gpio.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/wakeup-mask.h>
+#include "cpu.h"
+#include "pm.h"
+#include "wakeup-mask.h"
-#include "regs-dsc.h"
+#include "regs-dsc-s3c24xx.h"
#include "s3c2412-power.h"
extern void s3c2412_sleep_enter(void);
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c/pm-s3c2416.c
index 9a2f05e279d4..f69ad84cf4ff 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2416.c
+++ b/arch/arm/mach-s3c/pm-s3c2416.c
@@ -11,10 +11,10 @@
#include <asm/cacheflush.h>
-#include <mach/regs-s3c2443-clock.h>
+#include "regs-s3c2443-clock.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "pm.h"
#include "s3c2412-power.h"
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c/pm-s3c24xx.c
index c64988c609ad..3a8f5c38882e 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c/pm-s3c24xx.c
@@ -21,17 +21,17 @@
#include <linux/serial_s3c.h>
#include <linux/io.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-#include <mach/gpio-samsung.h>
+#include "regs-clock.h"
+#include "regs-gpio.h"
+#include "regs-irq.h"
+#include "gpio-samsung.h"
#include <asm/mach/time.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
+#include "gpio-cfg.h"
+#include "pm.h"
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
#define PFX "s3c24xx-pm: "
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c/pm-s3c64xx.c
index fd6dbb263ed5..4f1778123dee 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c/pm-s3c64xx.c
@@ -14,22 +14,22 @@
#include <linux/gpio.h>
#include <linux/pm_domain.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/wakeup-mask.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "wakeup-mask.h"
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/gpio-samsung.h>
+#include "regs-gpio.h"
+#include "regs-clock.h"
+#include "gpio-samsung.h"
-#include "regs-gpio-memport.h"
-#include "regs-modem.h"
-#include "regs-sys.h"
-#include "regs-syscon-power.h"
+#include "regs-gpio-memport-s3c64xx.h"
+#include "regs-modem-s3c64xx.h"
+#include "regs-sys-s3c64xx.h"
+#include "regs-syscon-power-s3c64xx.h"
struct s3c64xx_pm_domain {
char *const name;
@@ -305,6 +305,56 @@ static void s3c64xx_pm_prepare(void)
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
}
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
+{
+ u32 ucon;
+ u32 ucon_clk
+ u32 save_clk;
+ u32 new_ucon;
+ u32 delta;
+
+ if (!soc_is_s3c64xx())
+ return;
+
+ ucon = __raw_readl(regs + S3C2410_UCON);
+ ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+ sav_clk = save->ucon & S3C6400_UCON_CLKMASK;
+
+ /* S3C64XX UART blocks only support level interrupts, so ensure that
+ * when we restore unused UART blocks we force the level interrupt
+ * settigs. */
+ save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+ /* We have a constraint on changing the clock type of the UART
+ * between UCLKx and PCLK, so ensure that when we restore UCON
+ * that the CLK field is correctly modified if the bootloader
+ * has changed anything.
+ */
+ if (ucon_clk != save_clk) {
+ new_ucon = save->ucon;
+ delta = ucon_clk ^ save_clk;
+
+ /* change from UCLKx => wrong PCLK,
+ * either UCLK can be tested for by a bit-test
+ * with UCLK0 */
+ if (ucon_clk & S3C6400_UCON_UCLK0 &&
+ !(save_clk & S3C6400_UCON_UCLK0) &&
+ delta & S3C6400_UCON_PCLK2) {
+ new_ucon &= ~S3C6400_UCON_UCLK0;
+ } else if (delta == S3C6400_UCON_PCLK2) {
+ /* as an precaution, don't change from
+ * PCLK2 => PCLK or vice-versa */
+ new_ucon ^= S3C6400_UCON_PCLK2;
+ }
+
+ S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+ ucon, new_ucon, save->ucon);
+ save->ucon = new_ucon;
+ }
+}
+#endif
+
int __init s3c64xx_pm_init(void)
{
int i;
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/mach-s3c/pm.c
index d6bfd66592b0..c563bb9d92be 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/mach-s3c/pm.c
@@ -18,15 +18,16 @@
#include <asm/cacheflush.h>
#include <asm/suspend.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-irq.h>
+#include "map.h"
+#include "regs-clock.h"
+#include "regs-irq.h"
#include <mach/irqs.h>
#include <asm/irq.h>
-#include <plat/pm.h>
-#include <mach/pm-core.h>
+#include "cpu.h"
+#include "pm.h"
+#include "pm-core.h"
/* for external use */
@@ -70,8 +71,7 @@ static int s3c_pm_enter(suspend_state_t state)
{
int ret;
/* ensure the debug is initialised (if enabled) */
-
- s3c_pm_debug_init();
+ s3c_pm_debug_init_uart();
S3C_PMDBG("%s(%d)\n", __func__, state);
@@ -100,7 +100,7 @@ static int s3c_pm_enter(suspend_state_t state)
samsung_pm_saved_gpios();
}
- s3c_pm_save_uarts();
+ s3c_pm_save_uarts(soc_is_s3c2410());
s3c_pm_save_core();
/* set the irq configuration for wake */
@@ -137,14 +137,14 @@ static int s3c_pm_enter(suspend_state_t state)
/* restore the system state */
s3c_pm_restore_core();
- s3c_pm_restore_uarts();
+ s3c_pm_restore_uarts(soc_is_s3c2410());
if (!of_have_populated_dt()) {
samsung_pm_restore_gpios();
s3c_pm_restored_gpios();
}
- s3c_pm_debug_init();
+ s3c_pm_debug_init_uart();
/* check what irq (if any) restored the system */
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/mach-s3c/pm.h
index 2746137f9794..eed61e585457 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/mach-s3c/pm.h
@@ -11,7 +11,7 @@
* management
*/
-#include <plat/pm-common.h>
+#include "pm-common.h"
struct device;
diff --git a/arch/arm/plat-samsung/include/plat/pwm-core.h b/arch/arm/mach-s3c/pwm-core.h
index 05e3448642a1..05e3448642a1 100644
--- a/arch/arm/plat-samsung/include/plat/pwm-core.h
+++ b/arch/arm/mach-s3c/pwm-core.h
diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/mach-s3c/regs-adc.h
index 58953c7381dd..58953c7381dd 100644
--- a/arch/arm/plat-samsung/include/plat/regs-adc.h
+++ b/arch/arm/mach-s3c/regs-adc.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c/regs-clock-s3c24xx.h
index 7ca3dd4f13c0..933ddb5eedec 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c/regs-clock-s3c24xx.h
@@ -9,6 +9,8 @@
#ifndef __ASM_ARM_REGS_CLOCK
#define __ASM_ARM_REGS_CLOCK
+#include "map.h"
+
#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c/regs-clock-s3c64xx.h
index 35a68767b318..35a68767b318 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c/regs-clock-s3c64xx.h
diff --git a/arch/arm/mach-s3c/regs-clock.h b/arch/arm/mach-s3c/regs-clock.h
new file mode 100644
index 000000000000..7df31f203d28
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-clock.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-clock-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-clock-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/regs-dsc.h b/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
index b500636276f2..8b8b572aef04 100644
--- a/arch/arm/mach-s3c24xx/regs-dsc.h
+++ b/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
@@ -7,8 +7,8 @@
*/
-#ifndef __ASM_ARCH_REGS_DSC_H
-#define __ASM_ARCH_REGS_DSC_H __FILE__
+#ifndef __ASM_ARCH_REGS_DSC_S3C24XX_H
+#define __ASM_ARCH_REGS_DSC_S3C24XX_H __FILE__
/* S3C2412 */
#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc)
@@ -18,5 +18,5 @@
#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
-#endif /* __ASM_ARCH_REGS_DSC_H */
+#endif /* __ASM_ARCH_REGS_DSC_S3C24XX_H */
diff --git a/arch/arm/mach-s3c64xx/regs-gpio-memport.h b/arch/arm/mach-s3c/regs-gpio-memport-s3c64xx.h
index 589afe1132d6..589afe1132d6 100644
--- a/arch/arm/mach-s3c64xx/regs-gpio-memport.h
+++ b/arch/arm/mach-s3c/regs-gpio-memport-s3c64xx.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
index 594e967c0673..9a7e262268a7 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
@@ -10,6 +10,8 @@
#ifndef __ASM_ARCH_REGS_GPIO_H
#define __ASM_ARCH_REGS_GPIO_H
+#include "map-s3c.h"
+
#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
/* general configuration options */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio-s3c64xx.h
index 592a2be3d2aa..592a2be3d2aa 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c/regs-gpio-s3c64xx.h
diff --git a/arch/arm/mach-s3c/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio.h
new file mode 100644
index 000000000000..0d41cb76d440
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-gpio.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-gpio-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-gpio-s3c64xx.h"
+#endif
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-irq.h b/arch/arm/mach-s3c/regs-irq-s3c24xx.h
index 8d8e669e3903..c0b97b203415 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-irq.h
+++ b/arch/arm/mach-s3c/regs-irq-s3c24xx.h
@@ -8,6 +8,8 @@
#ifndef ___ASM_ARCH_REGS_IRQ_H
#define ___ASM_ARCH_REGS_IRQ_H
+#include "map-s3c.h"
+
/* interrupt controller */
#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ)
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/arch/arm/mach-s3c/regs-irq-s3c64xx.h
index b18c7bcb61c5..b18c7bcb61c5 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
+++ b/arch/arm/mach-s3c/regs-irq-s3c64xx.h
diff --git a/arch/arm/mach-s3c/regs-irq.h b/arch/arm/mach-s3c/regs-irq.h
new file mode 100644
index 000000000000..57f0dda8dbf5
--- /dev/null
+++ b/arch/arm/mach-s3c/regs-irq.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_ARCH_S3C24XX
+#include "regs-irq-s3c24xx.h"
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+#include "regs-irq-s3c64xx.h"
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/regs-irqtype.h b/arch/arm/mach-s3c/regs-irqtype.h
index ec5c4c5fdd8f..ec5c4c5fdd8f 100644
--- a/arch/arm/plat-samsung/include/plat/regs-irqtype.h
+++ b/arch/arm/mach-s3c/regs-irqtype.h
diff --git a/arch/arm/mach-s3c24xx/regs-mem.h b/arch/arm/mach-s3c/regs-mem-s3c24xx.h
index 2f3bc48b5890..8fed34a1672a 100644
--- a/arch/arm/mach-s3c24xx/regs-mem.h
+++ b/arch/arm/mach-s3c/regs-mem-s3c24xx.h
@@ -9,6 +9,8 @@
#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
+#include "map-s3c.h"
+
#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
#define S3C2410_BWSCON S3C2410_MEMREG(0x00)
diff --git a/arch/arm/mach-s3c64xx/regs-modem.h b/arch/arm/mach-s3c/regs-modem-s3c64xx.h
index 136ad44291bf..136ad44291bf 100644
--- a/arch/arm/mach-s3c64xx/regs-modem.h
+++ b/arch/arm/mach-s3c/regs-modem-s3c64xx.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c/regs-s3c2443-clock.h
index 6bf924612b06..b3b670d463db 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c/regs-s3c2443-clock.h
@@ -10,6 +10,9 @@
#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
#define __ASM_ARM_REGS_S3C2443_CLOCK
+#include <linux/delay.h>
+#include "map-s3c.h"
+
#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
#define S3C2443_PLLCON_MDIVSHIFT 16
@@ -184,5 +187,52 @@ s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
return (unsigned int)fvco;
}
+static inline void s3c_hsudc_init_phy(void)
+{
+ u32 cfg;
+
+ cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
+ writel(cfg, S3C2443_PWRCFG);
+
+ cfg = readl(S3C2443_URSTCON);
+ cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+ writel(cfg, S3C2443_URSTCON);
+ mdelay(1);
+
+ cfg = readl(S3C2443_URSTCON);
+ cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+ writel(cfg, S3C2443_URSTCON);
+
+ cfg = readl(S3C2443_PHYCTRL);
+ cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
+ cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
+ writel(cfg, S3C2443_PHYCTRL);
+
+ cfg = readl(S3C2443_PHYPWR);
+ cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
+ S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
+ S3C2443_PHYPWR_ANALOG_PD);
+ cfg |= S3C2443_PHYPWR_COMMON_ON;
+ writel(cfg, S3C2443_PHYPWR);
+
+ cfg = readl(S3C2443_UCLKCON);
+ cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
+ S3C2443_UCLKCON_TCLKEN);
+ writel(cfg, S3C2443_UCLKCON);
+}
+
+static inline void s3c_hsudc_uninit_phy(void)
+{
+ u32 cfg;
+
+ cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
+ writel(cfg, S3C2443_PWRCFG);
+
+ writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
+
+ cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
+ writel(cfg, S3C2443_UCLKCON);
+}
+
#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */
diff --git a/arch/arm/mach-s3c64xx/regs-srom.h b/arch/arm/mach-s3c/regs-srom-s3c64xx.h
index 2b37988bdf94..2b37988bdf94 100644
--- a/arch/arm/mach-s3c64xx/regs-srom.h
+++ b/arch/arm/mach-s3c/regs-srom-s3c64xx.h
diff --git a/arch/arm/mach-s3c64xx/regs-sys.h b/arch/arm/mach-s3c/regs-sys-s3c64xx.h
index 3687325e2bb4..3687325e2bb4 100644
--- a/arch/arm/mach-s3c64xx/regs-sys.h
+++ b/arch/arm/mach-s3c/regs-sys-s3c64xx.h
diff --git a/arch/arm/mach-s3c64xx/regs-syscon-power.h b/arch/arm/mach-s3c/regs-syscon-power-s3c64xx.h
index a35811cc656e..a35811cc656e 100644
--- a/arch/arm/mach-s3c64xx/regs-syscon-power.h
+++ b/arch/arm/mach-s3c/regs-syscon-power-s3c64xx.h
diff --git a/arch/arm/mach-s3c64xx/regs-usb-hsotg-phy.h b/arch/arm/mach-s3c/regs-usb-hsotg-phy-s3c64xx.h
index deb1dd2d9c83..deb1dd2d9c83 100644
--- a/arch/arm/mach-s3c64xx/regs-usb-hsotg-phy.h
+++ b/arch/arm/mach-s3c/regs-usb-hsotg-phy-s3c64xx.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/rtc-core.h b/arch/arm/mach-s3c/rtc-core-s3c24xx.h
index 88510333b96b..e7258b2423fc 100644
--- a/arch/arm/mach-s3c24xx/include/mach/rtc-core.h
+++ b/arch/arm/mach-s3c/rtc-core-s3c24xx.h
@@ -5,8 +5,8 @@
* Samsung RTC Controller core functions
*/
-#ifndef __RTC_CORE_H
-#define __RTC_CORE_H __FILE__
+#ifndef __RTC_CORE_S3C24XX_H
+#define __RTC_CORE_S3C24XX_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
@@ -20,4 +20,4 @@ static inline void s3c_rtc_setname(char *name)
s3c_device_rtc.name = name;
}
-#endif /* __RTC_CORE_H */
+#endif /* __RTC_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c/s3c2410.c
index 21fd5404bc98..4153e67f0e86 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c/s3c2410.c
@@ -25,24 +25,23 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "gpio-samsung.h"
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
-#include "common.h"
+#include "s3c24xx.h"
/* Initial IO mappings */
diff --git a/arch/arm/mach-s3c24xx/s3c2412-power.h b/arch/arm/mach-s3c/s3c2412-power.h
index 0031cfaa1d76..0031cfaa1d76 100644
--- a/arch/arm/mach-s3c24xx/s3c2412-power.h
+++ b/arch/arm/mach-s3c/s3c2412-power.h
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c/s3c2412.c
index 8fe4d4670dcb..35f4addd110b 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c/s3c2412.c
@@ -29,19 +29,17 @@
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/regs-spi.h>
-
-#include "common.h"
-#include "nand-core.h"
-#include "regs-dsc.h"
+#include "map.h"
+#include "regs-clock.h"
+#include "regs-gpio.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+
+#include "s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "regs-dsc-s3c24xx.h"
#include "s3c2412-power.h"
#ifndef CONFIG_CPU_S3C2412_ONLY
diff --git a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h b/arch/arm/mach-s3c/s3c2412.h
index 4ff83f956cfb..ed09a0e13bd8 100644
--- a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
+++ b/arch/arm/mach-s3c/s3c2412.h
@@ -8,6 +8,8 @@
#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__
+#include "map-s3c.h"
+
#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c/s3c2416.c
index 9514196cad8c..34b7c101becf 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c/s3c2416.c
@@ -26,30 +26,30 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "gpio-samsung.h"
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/rtc-core.h>
+#include "regs-s3c2443-clock.h"
+#include "rtc-core-s3c24xx.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/sdhci.h>
-#include <plat/pm.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "devs.h"
+#include "cpu.h"
+#include "sdhci.h"
+#include "pm.h"
-#include <plat/iic-core.h>
-#include <plat/adc-core.h>
+#include "iic-core.h"
+#include "adc-core.h"
-#include "common.h"
-#include "fb-core.h"
-#include "nand-core.h"
-#include "spi-core.h"
+#include "s3c24xx.h"
+#include "fb-core-s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "spi-core-s3c24xx.h"
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c/s3c2440.c
index 451d9851b0a7..c6cdee4987e8 100644
--- a/arch/arm/mach-s3c24xx/s3c2440.c
+++ b/arch/arm/mach-s3c/s3c2440.c
@@ -23,19 +23,18 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "gpio-samsung.h"
-#include "common.h"
+#include "s3c24xx.h"
static struct device s3c2440_dev = {
.bus = &s3c2440_subsys,
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c/s3c2442.c
index 432d68325c9d..0c0e30b6688f 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c/s3c2442.c
@@ -21,21 +21,20 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
#include <linux/atomic.h>
#include <asm/irq.h>
-#include <mach/regs-clock.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/pm.h>
+#include "cpu.h"
+#include "pm.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "gpio-samsung.h"
-#include "common.h"
+#include "s3c24xx.h"
static struct device s3c2442_dev = {
.bus = &s3c2442_subsys,
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c/s3c2443.c
index 4cbeb74cf3d6..45fde50b202c 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c/s3c2443.c
@@ -23,24 +23,26 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
+#include "map.h"
+#include "gpio-samsung.h"
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
-#include <mach/regs-s3c2443-clock.h>
-#include <mach/rtc-core.h>
+#include "regs-s3c2443-clock.h"
+#include "rtc-core-s3c24xx.h"
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc-core.h>
+#include "gpio-core.h"
+#include "gpio-cfg.h"
+#include "gpio-cfg-helpers.h"
+#include "devs.h"
+#include "cpu.h"
+#include "adc-core.h"
-#include "fb-core.h"
-#include "nand-core.h"
-#include "spi-core.h"
+#include "s3c24xx.h"
+#include "fb-core-s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "spi-core-s3c24xx.h"
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c/s3c244x.c
index a75f588b9d45..bae93598f009 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c/s3c244x.c
@@ -25,21 +25,19 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
+#include "map.h"
#include <asm/irq.h>
-#include <plat/cpu-freq.h>
+#include "regs-clock.h"
+#include "regs-gpio.h"
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
+#include "devs.h"
+#include "cpu.h"
+#include "pm.h"
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include "common.h"
-#include "nand-core.h"
-#include "regs-dsc.h"
+#include "s3c24xx.h"
+#include "nand-core-s3c24xx.h"
+#include "regs-dsc-s3c24xx.h"
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c/s3c24xx.c
index 3dc029c2d2cb..26a2190a81ff 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c/s3c24xx.c
@@ -17,11 +17,14 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-s3c2410.h>
#include <linux/platform_data/dma-s3c24xx.h>
#include <linux/dmaengine.h>
+#include <linux/clk/samsung.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
+#include "hardware-s3c24xx.h"
+#include "map.h"
+#include "regs-clock.h"
#include <asm/irq.h>
#include <asm/cacheflush.h>
#include <asm/system_info.h>
@@ -30,15 +33,14 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/dma.h>
+#include "regs-gpio.h"
+#include "dma-s3c24xx.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/cpu-freq.h>
-#include <plat/pwm-core.h>
+#include "cpu.h"
+#include "devs.h"
+#include "pwm-core.h"
-#include "common.h"
+#include "s3c24xx.h"
/* table of supported CPUs */
@@ -220,13 +222,13 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
}
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+void __init s3c24xx_set_timer_source(unsigned int event, unsigned int source)
{
s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
}
-void __init samsung_timer_init(void)
+void __init s3c24xx_timer_init(void)
{
unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
@@ -662,10 +664,17 @@ static struct resource s3c2410_dclk_resource[] = {
[0] = DEFINE_RES_MEM(0x56000084, 0x4),
};
+static struct s3c2410_clk_platform_data s3c_clk_platform_data = {
+ .modify_misccr = s3c2410_modify_misccr,
+};
+
struct platform_device s3c2410_device_dclk = {
.name = "s3c2410-dclk",
.id = 0,
.num_resources = ARRAY_SIZE(s3c2410_dclk_resource),
.resource = s3c2410_dclk_resource,
+ .dev = {
+ .platform_data = &s3c_clk_platform_data,
+ },
};
#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c/s3c24xx.h
index d087b20e8857..5848bef5bb49 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c/s3c24xx.h
@@ -10,6 +10,7 @@
#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
#include <linux/reboot.h>
+#include <mach/irqs.h>
struct s3c2410_uartcfg;
@@ -108,19 +109,16 @@ extern struct platform_device s3c2443_device_dma;
extern struct platform_device s3c2410_device_dclk;
-#ifdef CONFIG_S3C2410_COMMON_CLK
-void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
- int current_soc,
- void __iomem *reg_base);
-#endif
-#ifdef CONFIG_S3C2412_COMMON_CLK
-void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
- unsigned long ext_f, void __iomem *reg_base);
-#endif
-#ifdef CONFIG_S3C2443_COMMON_CLK
-void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
- int current_soc,
- void __iomem *reg_base);
-#endif
+enum s3c24xx_timer_mode {
+ S3C24XX_PWM0,
+ S3C24XX_PWM1,
+ S3C24XX_PWM2,
+ S3C24XX_PWM3,
+ S3C24XX_PWM4,
+};
+
+extern void __init s3c24xx_set_timer_source(enum s3c24xx_timer_mode event,
+ enum s3c24xx_timer_mode source);
+extern void __init s3c24xx_timer_init(void);
#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c/s3c6400.c
index 545eea716db8..802f4fb7462d 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c/s3c6400.c
@@ -26,19 +26,17 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/iic-core.h>
+#include "cpu.h"
+#include "devs.h"
+#include "sdhci.h"
+#include "iic-core.h"
-#include "common.h"
-#include "onenand-core.h"
+#include "s3c64xx.h"
+#include "onenand-core-s3c64xx.h"
void __init s3c6400_map_io(void)
{
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c/s3c6410.c
index 47e04e019624..dae17d5fd092 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c/s3c6410.c
@@ -27,21 +27,20 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
+#include <linux/soc/samsung/s3c-pm.h>
+#include "regs-clock.h"
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/iic-core.h>
+#include "cpu.h"
+#include "devs.h"
+#include "sdhci.h"
+#include "adc-core.h"
+#include "iic-core.h"
-#include "ata-core.h"
-#include "common.h"
-#include "onenand-core.h"
+#include "ata-core-s3c64xx.h"
+#include "s3c64xx.h"
+#include "onenand-core-s3c64xx.h"
void __init s3c6410_map_io(void)
{
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c/s3c64xx.c
index 13e91074308a..b5fc615a482f 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c/s3c64xx.c
@@ -24,6 +24,7 @@
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/io.h>
+#include <linux/clk/samsung.h>
#include <linux/dma-mapping.h>
#include <linux/irq.h>
#include <linux/gpio.h>
@@ -34,22 +35,19 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <mach/map.h>
+#include "map.h"
#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pwm-core.h>
-#include <plat/regs-irqtype.h>
-
-#include "common.h"
-#include "irq-uart.h"
-#include "watchdog-reset.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "cpu.h"
+#include "devs.h"
+#include "pm.h"
+#include "gpio-cfg.h"
+#include "pwm-core.h"
+#include "regs-irqtype.h"
+#include "s3c64xx.h"
+#include "irq-uart-s3c64xx.h"
/* External clock frequency */
static unsigned long xtal_f __ro_after_init = 12000000;
@@ -170,13 +168,13 @@ static struct samsung_pwm_variant s3c64xx_pwm_variant = {
.tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
};
-void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+void __init s3c64xx_set_timer_source(unsigned int event, unsigned int source)
{
s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
}
-void __init samsung_timer_init(void)
+void __init s3c64xx_timer_init(void)
{
unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
@@ -228,13 +226,7 @@ core_initcall(s3c64xx_dev_init);
void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
{
- /*
- * FIXME: there is no better place to put this at the moment
- * (s3c64xx_clk_init needs ioremap and must happen before init_time
- * samsung_wdt_reset_init needs clocks)
- */
s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
- samsung_wdt_reset_init(S3C_VA_WATCHDOG);
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
@@ -428,12 +420,3 @@ static int __init s3c64xx_init_irq_eint(void)
return 0;
}
arch_initcall(s3c64xx_init_irq_eint);
-
-void s3c64xx_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode != REBOOT_SOFT)
- samsung_wdt_reset();
-
- /* if all else fails, or mode was for soft, jump to 0 */
- soft_restart(0);
-}
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c/s3c64xx.h
index 03670887a764..92258e4f60f6 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c/s3c64xx.h
@@ -19,11 +19,7 @@
void s3c64xx_init_irq(u32 vic0, u32 vic1);
void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
-
struct device_node;
-void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
- unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
void s3c64xx_set_xtal_freq(unsigned long freq);
void s3c64xx_set_xusbxti_freq(unsigned long freq);
@@ -54,4 +50,17 @@ extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
#endif
+/* Samsung HR-Timer Clock mode */
+enum s3c64xx_timer_mode {
+ S3C64XX_PWM0,
+ S3C64XX_PWM1,
+ S3C64XX_PWM2,
+ S3C64XX_PWM3,
+ S3C64XX_PWM4,
+};
+
+extern void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
+ enum s3c64xx_timer_mode source);
+extern void __init s3c64xx_timer_init(void);
+
#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/mach-s3c/sdhci.h
index 5731e42ea208..9f9d419e58d7 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/mach-s3c/sdhci.h
@@ -15,7 +15,7 @@
#define __PLAT_S3C_SDHCI_H __FILE__
#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/devs.h>
+#include "devs.h"
/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
* @pd: The default platform data for this device.
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
index 2c7178b26ebb..cfa34b55ca21 100644
--- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c/setup-fb-24bpp-s3c64xx.c
@@ -12,9 +12,9 @@
#include <linux/fb.h>
#include <linux/gpio.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "fb.h"
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
void s3c64xx_fb_gpio_setup_24bpp(void)
{
diff --git a/arch/arm/mach-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
index 1a01d44b5910..0d88366b234c 100644
--- a/arch/arm/mach-s3c24xx/setup-i2c.c
+++ b/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
@@ -10,11 +10,11 @@
struct platform_device;
-#include <plat/gpio-cfg.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
+
+#include "gpio-cfg.h"
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c/setup-i2c0-s3c64xx.c
index 552eb50da38c..a6ef8d2bc995 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c/setup-i2c0-s3c64xx.c
@@ -14,8 +14,8 @@
struct platform_device; /* don't need the contents */
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c/setup-i2c1-s3c64xx.c
index d231f0fc508d..0fe37363d26e 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c/setup-i2c1-s3c64xx.c
@@ -14,8 +14,8 @@
struct platform_device; /* don't need the contents */
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c/setup-ide-s3c64xx.c
index 810139a807ce..f11f2b02e49f 100644
--- a/arch/arm/mach-s3c64xx/setup-ide.c
+++ b/arch/arm/mach-s3c/setup-ide-s3c64xx.c
@@ -9,12 +9,13 @@
#include <linux/gpio.h>
#include <linux/io.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
#include <linux/platform_data/ata-samsung_cf.h>
+#include "map.h"
+#include "regs-clock.h"
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
+
void s3c64xx_ide_setup_gpio(void)
{
u32 reg;
diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c/setup-keypad-s3c64xx.c
index 351961025273..8463ad37c6ab 100644
--- a/arch/arm/mach-s3c64xx/setup-keypad.c
+++ b/arch/arm/mach-s3c/setup-keypad-s3c64xx.c
@@ -6,9 +6,9 @@
// GPIO configuration for S3C64XX KeyPad device
#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/keypad.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "keypad.h"
+#include "gpio-samsung.h"
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
diff --git a/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
index 218346a36d1e..02131b3a731d 100644
--- a/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
@@ -14,9 +14,10 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/regs-gpio.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
+#include "sdhci.h"
void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c64xx.c
index 138455af4937..646ff949acd5 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c64xx.c
@@ -13,9 +13,9 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-cfg.h"
+#include "sdhci.h"
+#include "gpio-samsung.h"
void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c/setup-spi-s3c24xx.c
index 6c2b96a82da5..93fa1bbc9d5c 100644
--- a/arch/arm/mach-s3c24xx/setup-spi.c
+++ b/arch/arm/mach-s3c/setup-spi-s3c24xx.c
@@ -8,10 +8,10 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
-#include <plat/gpio-cfg.h>
+#include "gpio-cfg.h"
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
+#include "hardware-s3c24xx.h"
+#include "regs-gpio.h"
#ifdef CONFIG_S3C64XX_DEV_SPI0
int s3c64xx_spi0_cfg_gpio(void)
diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
index 39dfae1f46e7..efcf78d41585 100644
--- a/arch/arm/mach-s3c64xx/setup-spi.c
+++ b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
@@ -4,8 +4,9 @@
// http://www.samsung.com/
#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
+#include <linux/platform_data/spi-s3c64xx.h>
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
#ifdef CONFIG_S3C64XX_DEV_SPI0
int s3c64xx_spi0_cfg_gpio(void)
diff --git a/arch/arm/mach-s3c24xx/setup-ts.c b/arch/arm/mach-s3c/setup-ts-s3c24xx.c
index 53a14d4f4852..57363eaeb7e8 100644
--- a/arch/arm/mach-s3c24xx/setup-ts.c
+++ b/arch/arm/mach-s3c/setup-ts-s3c24xx.c
@@ -10,12 +10,14 @@
struct platform_device; /* don't need the contents */
-#include <plat/gpio-cfg.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
+#include "gpio-cfg.h"
+#include "gpio-samsung.h"
/**
* s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
+ * @dev: Device to configure GPIO for (ignored)
*
* Configure the GPIO for the S3C2410 system, where we have external FETs
* connected to the device (later systems such as the S3C2440 integrate
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c/setup-usb-phy-s3c64xx.c
index d6b0e3b268af..500d105afd6b 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c/setup-usb-phy-s3c64xx.c
@@ -8,12 +8,12 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/usb-phy.h>
+#include "map.h"
+#include "cpu.h"
+#include "usb-phy.h"
-#include "regs-sys.h"
-#include "regs-usb-hsotg-phy.h"
+#include "regs-sys-s3c64xx.h"
+#include "regs-usb-hsotg-phy-s3c64xx.h"
enum samsung_usb_phy_type {
USB_PHY_TYPE_DEVICE,
@@ -31,7 +31,7 @@ static int s3c_usb_otgphy_init(struct platform_device *pdev)
phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
xusbxti = clk_get(&pdev->dev, "xusbxti");
- if (xusbxti && !IS_ERR(xusbxti)) {
+ if (!IS_ERR(xusbxti)) {
switch (clk_get_rate(xusbxti)) {
case 12 * MHZ:
phyclk |= S3C_PHYCLK_CLKSEL_12M;
diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c/simtec-audio.c
index 12e17f82dae3..487485bcc2ab 100644
--- a/arch/arm/mach-s3c24xx/simtec-audio.c
+++ b/arch/arm/mach-s3c/simtec-audio.c
@@ -12,11 +12,12 @@
#include <linux/device.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+#include "gpio-cfg.h"
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <plat/devs.h>
+#include "devs.h"
#include "bast.h"
#include "simtec.h"
@@ -65,6 +66,10 @@ int __init simtec_audio_add(const char *name, bool has_lr_routing,
if (has_lr_routing)
simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
+ /* Configure the I2S pins (GPE0...GPE4) in correct mode */
+ s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
+
platform_device_register(&s3c_device_iis);
platform_device_register(&simtec_audio_dev);
return 0;
diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c/simtec-nor.c
index 26b18497e959..a6fba056a747 100644
--- a/arch/arm/mach-s3c24xx/simtec-nor.c
+++ b/arch/arm/mach-s3c/simtec-nor.c
@@ -21,7 +21,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/map.h>
+#include "map.h"
#include "bast.h"
#include "simtec.h"
diff --git a/arch/arm/mach-s3c24xx/simtec-pm.c b/arch/arm/mach-s3c/simtec-pm.c
index c19074d81389..490256a766e2 100644
--- a/arch/arm/mach-s3c24xx/simtec-pm.c
+++ b/arch/arm/mach-s3c/simtec-pm.c
@@ -19,16 +19,14 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
+#include "map.h"
+#include "regs-gpio.h"
#include <asm/mach-types.h>
-#include <plat/pm.h>
+#include "pm.h"
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c/simtec-usb.c
index dc1016ffed94..18fe0642743a 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c/simtec-usb.c
@@ -23,12 +23,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/gpio-samsung.h>
+#include "gpio-samsung.h"
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <plat/devs.h>
+#include "devs.h"
#include "bast.h"
#include "simtec.h"
diff --git a/arch/arm/mach-s3c24xx/simtec.h b/arch/arm/mach-s3c/simtec.h
index d96bd60872b8..d96bd60872b8 100644
--- a/arch/arm/mach-s3c24xx/simtec.h
+++ b/arch/arm/mach-s3c/simtec.h
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c/sleep-s3c2410.S
index 659f9eff9de2..04aded98782b 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S
+++ b/arch/arm/mach-s3c/sleep-s3c2410.S
@@ -13,13 +13,12 @@
#include <linux/linkage.h>
#include <linux/serial_s3c.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
+#include "regs-gpio.h"
+#include "regs-clock.h"
-#include "regs-mem.h"
+#include "regs-mem-s3c24xx.h"
/* s3c2410_cpu_suspend
*
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/arch/arm/mach-s3c/sleep-s3c2412.S
index c373f1ca862b..b4b61737fbb2 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2412.S
+++ b/arch/arm/mach-s3c/sleep-s3c2412.S
@@ -8,10 +8,9 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-irq.h>
+#include "regs-irq.h"
.text
diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c/sleep-s3c24xx.S
index f0f11ad60c52..4b2af91f3dce 100644
--- a/arch/arm/mach-s3c24xx/sleep.S
+++ b/arch/arm/mach-s3c/sleep-s3c24xx.S
@@ -13,11 +13,10 @@
#include <linux/linkage.h>
#include <linux/serial_s3c.h>
#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
+#include "map.h"
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
+#include "regs-gpio.h"
+#include "regs-clock.h"
/*
* S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c/sleep-s3c64xx.S
index 39e16a07a5e4..739e53fbce09 100644
--- a/arch/arm/mach-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c/sleep-s3c64xx.S
@@ -11,12 +11,12 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <mach/map.h>
+#include "map.h"
#undef S3C64XX_VA_GPIO
#define S3C64XX_VA_GPIO (0x0)
-#include <mach/regs-gpio.h>
+#include "regs-gpio.h"
#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
diff --git a/arch/arm/mach-s3c24xx/spi-core.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h
index 1048fac629a2..057667469cc3 100644
--- a/arch/arm/mach-s3c24xx/spi-core.h
+++ b/arch/arm/mach-s3c/spi-core-s3c24xx.h
@@ -3,8 +3,8 @@
* Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
*/
-#ifndef __PLAT_S3C_SPI_CORE_H
-#define __PLAT_S3C_SPI_CORE_H
+#ifndef __PLAT_S3C_SPI_CORE_S3C24XX_H
+#define __PLAT_S3C_SPI_CORE_S3C24XX_H
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
@@ -24,4 +24,4 @@ static inline void s3c24xx_spi_setname(char *name)
#endif
}
-#endif /* __PLAT_S3C_SPI_CORE_H */
+#endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */
diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/mach-s3c/usb-phy.h
index 759d66a0773a..759d66a0773a 100644
--- a/arch/arm/plat-samsung/include/plat/usb-phy.h
+++ b/arch/arm/mach-s3c/usb-phy.h
diff --git a/arch/arm/mach-s3c24xx/vr1000.h b/arch/arm/mach-s3c/vr1000.h
index 3cfa296bec2a..3cfa296bec2a 100644
--- a/arch/arm/mach-s3c24xx/vr1000.h
+++ b/arch/arm/mach-s3c/vr1000.h
diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/mach-s3c/wakeup-mask.c
index 24f96fb80738..b490e7527c66 100644
--- a/arch/arm/plat-samsung/wakeup-mask.c
+++ b/arch/arm/mach-s3c/wakeup-mask.c
@@ -11,8 +11,8 @@
#include <linux/irq.h>
#include <linux/io.h>
-#include <plat/wakeup-mask.h>
-#include <plat/pm.h>
+#include "wakeup-mask.h"
+#include "pm.h"
void samsung_sync_wakemask(void __iomem *reg,
const struct samsung_wakeup_mask *mask, int nr_mask)
diff --git a/arch/arm/plat-samsung/include/plat/wakeup-mask.h b/arch/arm/mach-s3c/wakeup-mask.h
index 630909e6630b..630909e6630b 100644
--- a/arch/arm/plat-samsung/include/plat/wakeup-mask.h
+++ b/arch/arm/mach-s3c/wakeup-mask.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/fb.h b/arch/arm/mach-s3c24xx/include/mach/fb.h
deleted file mode 100644
index 4e539cb8b884..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/fb.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <plat/fb-s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h
deleted file mode 100644
index f960e6d10114..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/io.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-s3c2410/include/mach/io.h
- * from arch/arm/mach-rpc/include/mach/io.h
- *
- * Copyright (C) 1997 Russell King
- * (C) 2003 Simtec Electronics
-*/
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses. PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1. ARM addresses are above A28
- * and are translated to the start of IO. Note that all addresses are
- * not shifted left!
- */
-
-#define __PORT_PCIO(x) ((x) < (1<<28))
-
-#define PCIO_BASE (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_b (S3C24XX_VA_ISA_BYTE)
-#define PCIO_BASE_w (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_l (S3C24XX_VA_ISA_WORD)
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-
-#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
-static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
-{ \
- unsigned long temp; \
- __asm__ __volatile__( \
- "cmp %2, #(1<<28)\n\t" \
- "mov %0, %2\n\t" \
- "addcc %0, %0, %3\n\t" \
- "str" instr " %1, [%0, #0 ] @ out" #fnsuffix \
- : "=&r" (temp) \
- : "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
- : "cc"); \
-}
-
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
-static inline unsigned sz __in##fnsuffix (unsigned int port) \
-{ \
- unsigned long temp, value; \
- __asm__ __volatile__( \
- "cmp %2, #(1<<28)\n\t" \
- "mov %0, %2\n\t" \
- "addcc %0, %0, %3\n\t" \
- "ldr" instr " %1, [%0, #0 ] @ in" #fnsuffix \
- : "=&r" (temp), "=r" (value) \
- : "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
- : "cc"); \
- return (unsigned sz)value; \
-}
-
-static inline void __iomem *__ioaddr (unsigned long port)
-{
- return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr) \
- DECLARE_DYN_IN(sz,fnsuffix,instr) \
- DECLARE_DYN_OUT(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"h")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port) \
-({ \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "strb %0, [%1, %2] @ outbc" \
- : : "r" (value), "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "strb %0, [%1, #0] @ outbc" \
- : : "r" (value), "r" ((port))); \
-})
-
-#define __inbc(port) \
-({ \
- unsigned char result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldrb %0, [%1, %2] @ inbc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "ldrb %0, [%1, #0] @ inbc" \
- : "=r" (result) : "r" ((port))); \
- result; \
-})
-
-#define __outwc(value,port) \
-({ \
- unsigned long v = value; \
- if (__PORT_PCIO((port))) { \
- if ((port) < 256 && (port) > -256) \
- __asm__ __volatile__( \
- "strh %0, [%1, %2] @ outwc" \
- : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
- else if ((port) > 0) \
- __asm__ __volatile__( \
- "strh %0, [%1, %2] @ outwc" \
- : : "r" (v), \
- "r" (PCIO_BASE + ((port) & ~0xff)), \
- "Jr" (((port) & 0xff))); \
- else \
- __asm__ __volatile__( \
- "strh %0, [%1, #0] @ outwc" \
- : : "r" (v), \
- "r" (PCIO_BASE + (port))); \
- } else \
- __asm__ __volatile__( \
- "strh %0, [%1, #0] @ outwc" \
- : : "r" (v), "r" ((port))); \
-})
-
-#define __inwc(port) \
-({ \
- unsigned short result; \
- if (__PORT_PCIO((port))) { \
- if ((port) < 256 && (port) > -256 ) \
- __asm__ __volatile__( \
- "ldrh %0, [%1, %2] @ inwc" \
- : "=r" (result) \
- : "r" (PCIO_BASE), \
- "Jr" ((port))); \
- else if ((port) > 0) \
- __asm__ __volatile__( \
- "ldrh %0, [%1, %2] @ inwc" \
- : "=r" (result) \
- : "r" (PCIO_BASE + ((port) & ~0xff)), \
- "Jr" (((port) & 0xff))); \
- else \
- __asm__ __volatile__( \
- "ldrh %0, [%1, #0] @ inwc" \
- : "=r" (result) \
- : "r" (PCIO_BASE + ((port)))); \
- } else \
- __asm__ __volatile__( \
- "ldrh %0, [%1, #0] @ inwc" \
- : "=r" (result) : "r" ((port))); \
- result; \
-})
-
-#define __outlc(value,port) \
-({ \
- unsigned long v = value; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "str %0, [%1, %2] @ outlc" \
- : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "str %0, [%1, #0] @ outlc" \
- : : "r" (v), "r" ((port))); \
-})
-
-#define __inlc(port) \
-({ \
- unsigned long result; \
- if (__PORT_PCIO((port))) \
- __asm__ __volatile__( \
- "ldr %0, [%1, %2] @ inlc" \
- : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
- else \
- __asm__ __volatile__( \
- "ldr %0, [%1, #0] @ inlc" \
- : "=r" (result) : "r" ((port))); \
- result; \
-})
-
-#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)0 + (port)))
-
-#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
-#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
-#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
-#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
-
-#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
-#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l)
-
-#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
-#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l)
-
-#endif
diff --git a/arch/arm/mach-s3c24xx/setup-camif.c b/arch/arm/mach-s3c24xx/setup-camif.c
deleted file mode 100644
index 2b262fae3f61..000000000000
--- a/arch/arm/mach-s3c24xx/setup-camif.c
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
-//
-// Helper functions for S3C24XX/S3C64XX SoC series CAMIF driver
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <mach/gpio-samsung.h>
-
-/* Number of camera port pins, without FIELD */
-#define S3C_CAMIF_NUM_GPIOS 13
-
-/* Default camera port configuration helpers. */
-
-static void camif_get_gpios(int *gpio_start, int *gpio_reset)
-{
-#ifdef CONFIG_ARCH_S3C24XX
- *gpio_start = S3C2410_GPJ(0);
- *gpio_reset = S3C2410_GPJ(12);
-#else
- /* s3c64xx */
- *gpio_start = S3C64XX_GPF(0);
- *gpio_reset = S3C64XX_GPF(3);
-#endif
-}
-
-int s3c_camif_gpio_get(void)
-{
- int gpio_start, gpio_reset;
- int ret, i;
-
- camif_get_gpios(&gpio_start, &gpio_reset);
-
- for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
- int gpio = gpio_start + i;
-
- if (gpio == gpio_reset)
- continue;
-
- ret = gpio_request(gpio, "camif");
- if (!ret)
- ret = s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- if (ret) {
- pr_err("failed to configure GPIO %d\n", gpio);
- for (--i; i >= 0; i--)
- gpio_free(gpio--);
- return ret;
- }
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- return 0;
-}
-
-void s3c_camif_gpio_put(void)
-{
- int i, gpio_start, gpio_reset;
-
- camif_get_gpios(&gpio_start, &gpio_reset);
-
- for (i = 0; i < S3C_CAMIF_NUM_GPIOS; i++) {
- int gpio = gpio_start + i;
- if (gpio != gpio_reset)
- gpio_free(gpio);
- }
-}
diff --git a/arch/arm/mach-s3c64xx/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h
deleted file mode 100644
index c4ed359474de..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/hardware.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - Hardware support
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/watchdog-reset.h b/arch/arm/mach-s3c64xx/watchdog-reset.h
deleted file mode 100644
index 1042d6c463dc..000000000000
--- a/arch/arm/mach-s3c64xx/watchdog-reset.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- */
-
-#ifndef __PLAT_SAMSUNG_WATCHDOG_RESET_H
-#define __PLAT_SAMSUNG_WATCHDOG_RESET_H
-
-extern void samsung_wdt_reset(void);
-extern void samsung_wdt_reset_of_init(void);
-extern void samsung_wdt_reset_init(void __iomem *base);
-
-#endif /* __PLAT_SAMSUNG_WATCHDOG_RESET_H */
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 03984a791879..95d4e8284866 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -14,10 +14,10 @@ config ARCH_S5PV210
select COMMON_CLK_SAMSUNG
select GPIOLIB
select HAVE_S3C2410_I2C if I2C
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
+ select SOC_SAMSUNG
help
Samsung S5PV210/S5PC110 series based systems
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index e7b551e18e5c..aa0a1f091daf 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -3,12 +3,5 @@
# Copyright (c) 2010 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/arch/arm/plat-samsung/include
-
-# Core
-
obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
-
-# machine support
-
obj-y += s5pv210.o
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index b336df0c57f3..d59c094cdea8 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -13,15 +13,56 @@
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/io.h>
+#include <linux/soc/samsung/s3c-pm.h>
#include <asm/cacheflush.h>
#include <asm/suspend.h>
-#include <plat/pm-common.h>
-
#include "common.h"
#include "regs-clock.h"
+/* helper functions to save and restore register state */
+struct sleep_save {
+ void __iomem *reg;
+ unsigned long val;
+};
+
+#define SAVE_ITEM(x) \
+ { .reg = (x) }
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+static void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ ptr->val = readl_relaxed(ptr->reg);
+ S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+ }
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+static void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++)
+ writel_relaxed(ptr->val, ptr->reg);
+}
+
static struct sleep_save s5pv210_core_save[] = {
/* Clock ETC */
SAVE_ITEM(S5P_MDNIE_SEL),
@@ -99,8 +140,6 @@ static int s5pv210_suspend_enter(suspend_state_t state)
u32 eint_wakeup_mask = s5pv210_read_eint_wakeup_mask();
int ret;
- s3c_pm_debug_init();
-
S3C_PMDBG("%s: suspending the system...\n", __func__);
S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
@@ -113,7 +152,7 @@ static int s5pv210_suspend_enter(suspend_state_t state)
return -EINVAL;
}
- s3c_pm_save_uarts();
+ s3c_pm_save_uarts(false);
s5pv210_pm_prepare();
flush_cache_all();
s3c_pm_check_store();
@@ -122,7 +161,7 @@ static int s5pv210_suspend_enter(suspend_state_t state)
if (ret)
return ret;
- s3c_pm_restore_uarts();
+ s3c_pm_restore_uarts(false);
S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
__raw_readl(S5P_WAKEUP_STAT));
diff --git a/arch/arm/mach-s5pv210/regs-clock.h b/arch/arm/mach-s5pv210/regs-clock.h
index 2a35c831a9b0..9cad2306e470 100644
--- a/arch/arm/mach-s5pv210/regs-clock.h
+++ b/arch/arm/mach-s5pv210/regs-clock.h
@@ -9,7 +9,9 @@
#ifndef __ASM_ARCH_REGS_CLOCK_H
#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-#include <plat/map-base.h>
+#define S3C_ADDR_BASE 0xF6000000
+#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x))
+#define S3C_VA_SYS S3C_ADDR(0x00100000)
#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
diff --git a/arch/arm/mach-s5pv210/s5pv210.c b/arch/arm/mach-s5pv210/s5pv210.c
index 868f9c20419d..a21ed3bb992a 100644
--- a/arch/arm/mach-s5pv210/s5pv210.c
+++ b/arch/arm/mach-s5pv210/s5pv210.c
@@ -13,8 +13,6 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <plat/map-base.h>
-
#include "common.h"
#include "regs-clock.h"
diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h
deleted file mode 100644
index 32ab0860f631..000000000000
--- a/arch/arm/plat-samsung/include/plat/samsung-time.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for samsung s3c and s5p time support
- */
-
-#ifndef __ASM_PLAT_SAMSUNG_TIME_H
-#define __ASM_PLAT_SAMSUNG_TIME_H __FILE__
-
-/* Samsung HR-Timer Clock mode */
-enum samsung_timer_mode {
- SAMSUNG_PWM0,
- SAMSUNG_PWM1,
- SAMSUNG_PWM2,
- SAMSUNG_PWM3,
- SAMSUNG_PWM4,
-};
-
-extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
- enum samsung_timer_mode source);
-
-extern void __init samsung_timer_init(void);
-
-#endif /* __ASM_PLAT_SAMSUNG_TIME_H */
diff --git a/arch/arm/plat-samsung/watchdog-reset.c b/arch/arm/plat-samsung/watchdog-reset.c
deleted file mode 100644
index 71d85ff323f7..000000000000
--- a/arch/arm/plat-samsung/watchdog-reset.c
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Simtec Electronics
-// Ben Dooks <ben@simtec.co.uk>
-//
-// Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
-//
-// Watchdog reset support for Samsung SoCs.
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#define S3C2410_WTCON 0x00
-#define S3C2410_WTDAT 0x04
-#define S3C2410_WTCNT 0x08
-
-#define S3C2410_WTCON_ENABLE (1 << 5)
-#define S3C2410_WTCON_DIV16 (0 << 3)
-#define S3C2410_WTCON_RSTEN (1 << 0)
-#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
-
-static void __iomem *wdt_base;
-static struct clk *wdt_clock;
-
-void samsung_wdt_reset(void)
-{
- if (!wdt_base) {
- pr_err("%s: wdt reset not initialized\n", __func__);
- /* delay to allow the serial port to show the message */
- mdelay(50);
- return;
- }
-
- if (!IS_ERR(wdt_clock))
- clk_prepare_enable(wdt_clock);
-
- /* disable watchdog, to be safe */
- __raw_writel(0, wdt_base + S3C2410_WTCON);
-
- /* put initial values into count and data */
- __raw_writel(0x80, wdt_base + S3C2410_WTCNT);
- __raw_writel(0x80, wdt_base + S3C2410_WTDAT);
-
- /* set the watchdog to go and reset... */
- __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 |
- S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20),
- wdt_base + S3C2410_WTCON);
-
- /* wait for reset to assert... */
- mdelay(500);
-
- pr_err("Watchdog reset failed to assert reset\n");
-
- /* delay to allow the serial port to show the message */
- mdelay(50);
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id s3c2410_wdt_match[] = {
- { .compatible = "samsung,s3c2410-wdt" },
- { .compatible = "samsung,s3c6410-wdt" },
- {},
-};
-
-void __init samsung_wdt_reset_of_init(void)
-{
- struct device_node *np;
-
- np = of_find_matching_node(NULL, s3c2410_wdt_match);
- if (!np) {
- pr_err("%s: failed to find watchdog node\n", __func__);
- return;
- }
-
- wdt_base = of_iomap(np, 0);
- if (!wdt_base) {
- pr_err("%s: failed to map watchdog registers\n", __func__);
- return;
- }
-
- wdt_clock = of_clk_get(np, 0);
-}
-#endif
-
-void __init samsung_wdt_reset_init(void __iomem *base)
-{
- wdt_base = base;
- wdt_clock = clk_get(NULL, "watchdog");
-}
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index cd58f8495c45..d235b27cf372 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -80,7 +80,6 @@ config ARCH_EXYNOS
select EXYNOS_CHIPID
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select EXYNOS_PMU
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c
index 7dad9098e897..f5e0a6ba2d12 100644
--- a/drivers/clk/samsung/clk-s3c2410-dclk.c
+++ b/drivers/clk/samsung/clk-s3c2410-dclk.c
@@ -11,13 +11,10 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/clk-s3c2410.h>
#include <linux/module.h>
#include "clk.h"
-/* legacy access to misccr, until dt conversion is finished */
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-
#define MUX_DCLK0 0
#define MUX_DCLK1 1
#define DIV_DCLK0 2
@@ -52,6 +49,7 @@ struct s3c24xx_clkout {
struct clk_hw hw;
u32 mask;
u8 shift;
+ unsigned int (*modify_misccr)(unsigned int clr, unsigned int chg);
};
#define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw)
@@ -62,7 +60,7 @@ static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw)
int num_parents = clk_hw_get_num_parents(hw);
u32 val;
- val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift;
+ val = clkout->modify_misccr(0, 0) >> clkout->shift;
val >>= clkout->shift;
val &= clkout->mask;
@@ -76,7 +74,7 @@ static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index)
{
struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw);
- s3c2410_modify_misccr((clkout->mask << clkout->shift),
+ clkout->modify_misccr((clkout->mask << clkout->shift),
(index << clkout->shift));
return 0;
@@ -92,10 +90,14 @@ static struct clk_hw *s3c24xx_register_clkout(struct device *dev,
const char *name, const char **parent_names, u8 num_parents,
u8 shift, u32 mask)
{
+ struct s3c2410_clk_platform_data *pdata = dev_get_platdata(dev);
struct s3c24xx_clkout *clkout;
struct clk_init_data init;
int ret;
+ if (!pdata)
+ return ERR_PTR(-EINVAL);
+
/* allocate the clkout */
clkout = kzalloc(sizeof(*clkout), GFP_KERNEL);
if (!clkout)
@@ -110,6 +112,7 @@ static struct clk_hw *s3c24xx_register_clkout(struct device *dev,
clkout->shift = shift;
clkout->mask = mask;
clkout->hw.init = &init;
+ clkout->modify_misccr = pdata->modify_misccr;
ret = clk_hw_register(dev, &clkout->hw);
if (ret)
diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c
index fcf6764693cc..5831d0606077 100644
--- a/drivers/clk/samsung/clk-s3c2410.c
+++ b/drivers/clk/samsung/clk-s3c2410.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk/samsung.h>
#include <linux/of.h>
#include <linux/of_address.h>
diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c
index a95ab5f75163..724ef642f048 100644
--- a/drivers/clk/samsung/clk-s3c2412.c
+++ b/drivers/clk/samsung/clk-s3c2412.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk/samsung.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
diff --git a/drivers/clk/samsung/clk-s3c2443.c b/drivers/clk/samsung/clk-s3c2443.c
index c7aba1e1af70..a827d63766d1 100644
--- a/drivers/clk/samsung/clk-s3c2443.c
+++ b/drivers/clk/samsung/clk-s3c2443.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clk/samsung.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c
index b96d33e5eb45..56f95b63f71f 100644
--- a/drivers/clk/samsung/clk-s3c64xx.c
+++ b/drivers/clk/samsung/clk-s3c64xx.c
@@ -7,6 +7,7 @@
#include <linux/slab.h>
#include <linux/clk-provider.h>
+#include <linux/clk/samsung.h>
#include <linux/of.h>
#include <linux/of_address.h>
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index cb72fb507d57..6514a39981e1 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -196,7 +196,6 @@ config ARM_S3C24XX_CPUFREQ_DEBUGFS
config ARM_S3C2410_CPUFREQ
bool
depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
- select S3C2410_CPUFREQ_UTILS
help
CPU Frequency scaling support for S3C2410
@@ -233,7 +232,6 @@ config ARM_S3C2416_CPUFREQ_VCORESCALE
config ARM_S3C2440_CPUFREQ
bool "S3C2440/S3C2442 CPU Frequency scaling support"
depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
- select S3C2410_CPUFREQ_UTILS
default y
help
CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c
index 0c4f2ccd7e22..5dcfbf0bfb74 100644
--- a/drivers/cpufreq/s3c2410-cpufreq.c
+++ b/drivers/cpufreq/s3c2410-cpufreq.c
@@ -16,14 +16,14 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#define S3C2410_CLKDIVN_PDIVN (1<<0)
+#define S3C2410_CLKDIVN_HDIVN (1<<1)
/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
@@ -37,7 +37,7 @@ static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
if (cfg->divs.p_divisor != cfg->divs.h_divisor)
clkdiv |= S3C2410_CLKDIVN_PDIVN;
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
+ s3c24xx_write_clkdivn(clkdiv);
}
static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c
index 53385a9ab957..5945945ead7c 100644
--- a/drivers/cpufreq/s3c2412-cpufreq.c
+++ b/drivers/cpufreq/s3c2412-cpufreq.c
@@ -19,15 +19,24 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/s3c2412.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#define S3C2412_CLKDIVN_PDIVN (1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
+#define S3C2412_CLKDIVN_ARMDIVN (1<<3)
+#define S3C2412_CLKDIVN_DVSEN (1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
+#define S3C2412_CLKDIVN_USB48DIV (1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16)
/* our clock resources. */
static struct clk *xtal;
@@ -117,7 +126,7 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
unsigned long clkdiv;
unsigned long olddiv;
- olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ olddiv = clkdiv = s3c24xx_read_clkdivn();
/* clear off current clock info */
@@ -134,32 +143,11 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
clkdiv |= S3C2412_CLKDIVN_PDIVN;
s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
+ s3c24xx_write_clkdivn(clkdiv);
clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
}
-static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
- struct s3c_cpufreq_board *board = cfg->board;
- unsigned long refresh;
-
- s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
- board->refresh, cfg->freq.hclk);
-
- /* Reduce both the refresh time (in ns) and the frequency (in MHz)
- * by 10 each to ensure that we do not overflow 32 bit numbers. This
- * should work for HCLK up to 133MHz and refresh period up to 30usec.
- */
-
- refresh = (board->refresh / 10);
- refresh *= (cfg->freq.hclk / 100);
- refresh /= (1 * 1000 * 1000); /* 10^6 */
-
- s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
- __raw_writel(refresh, S3C2412_REFRESH);
-}
-
/* set the default cpu frequency information, based on an 200MHz part
* as we have no other way of detecting the speed rating in software.
*/
diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c
index 3f772ba8896e..148e8aedefa9 100644
--- a/drivers/cpufreq/s3c2440-cpufreq.c
+++ b/drivers/cpufreq/s3c2440-cpufreq.c
@@ -20,14 +20,27 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/regs-clock.h>
+#define S3C2440_CLKDIVN_PDIVN (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
+#define S3C2440_CLKDIVN_UCLK (1<<3)
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
+#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
+#define S3C2440_CAMDIVN_DVSEN (1<<12)
+
+#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5)
static struct clk *xtal;
static struct clk *fclk;
@@ -143,8 +156,8 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__,
cfg->divs.h_divisor, cfg->divs.p_divisor);
- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- camdiv = __raw_readl(S3C2440_CAMDIVN);
+ clkdiv = s3c24xx_read_clkdivn();
+ camdiv = s3c2440_read_camdivn();
clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
camdiv &= ~CAMDIVN_HCLK_HALF;
@@ -184,11 +197,11 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
* then make a short delay and remove the hclk halving if necessary.
*/
- __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
+ s3c2440_write_camdivn(camdiv | CAMDIVN_HCLK_HALF);
+ s3c24xx_write_clkdivn(clkdiv);
ndelay(20);
- __raw_writel(camdiv, S3C2440_CAMDIVN);
+ s3c2440_write_camdivn(camdiv);
clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
}
diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
index 290e3539d03e..93971dfe7c75 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
@@ -18,7 +18,7 @@
#include <linux/seq_file.h>
#include <linux/err.h>
-#include <plat/cpu-freq-core.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
static struct dentry *dbgfs_root;
static struct dentry *dbgfs_file_io;
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index ed0e713b1b57..37efc0dc3f91 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -21,17 +21,13 @@
#include <linux/device.h>
#include <linux/sysfs.h>
#include <linux/slab.h>
+#include <linux/soc/samsung/s3c-cpufreq-core.h>
+#include <linux/soc/samsung/s3c-pm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-
-#include <mach/regs-clock.h>
-
/* note, cpufreq support deals in kHz, no Hz */
-
static struct cpufreq_driver s3c24xx_driver;
static struct s3c_cpufreq_config cpu_cur;
static struct s3c_iotimings s3c24xx_iotiming;
@@ -68,7 +64,7 @@ static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
- cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON);
+ cfg->pll.driver_data = s3c24xx_read_mpllcon();
cfg->pll.frequency = fclk;
cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
@@ -386,7 +382,7 @@ static unsigned int suspend_freq;
static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
{
suspend_pll.frequency = clk_get_rate(_clk_mpll);
- suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON);
+ suspend_pll.driver_data = s3c24xx_read_mpllcon();
suspend_freq = clk_get_rate(clk_arm);
return 0;
@@ -547,7 +543,7 @@ static void s3c_cpufreq_update_loctkime(void)
val |= calc_locktime(rate, cpu_cur.info->locktime_m);
pr_info("%s: new locktime is 0x%08x\n", __func__, val);
- __raw_writel(val, S3C2410_LOCKTIME);
+ s3c24xx_write_locktime(val);
}
static int s3c_cpufreq_build_freq(void)
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index b490fe3d2ee8..f2703c5460d0 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -20,7 +20,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
-#include <plat/adc.h>
+#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/hwmon-s3c.h>
struct s3c_hwmon_attr {
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 82920ff46f72..2e70c0b79444 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -20,10 +20,43 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/adc.h>
-#include <plat/regs-adc.h>
+#include <linux/soc/samsung/s3c-adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
+#define S3C2410_ADCCON (0x00)
+#define S3C2410_ADCTSC (0x04)
+#define S3C2410_ADCDLY (0x08)
+#define S3C2410_ADCDAT0 (0x0C)
+#define S3C2410_ADCDAT1 (0x10)
+#define S3C64XX_ADCUPDN (0x14)
+#define S3C2443_ADCMUX (0x18)
+#define S3C64XX_ADCCLRINT (0x18)
+#define S5P_ADCMUX (0x1C)
+#define S3C64XX_ADCCLRINTPNDNUP (0x20)
+
+/* ADCTSC Register Bits */
+#define S3C2443_ADCTSC_UD_SEN (1 << 8)
+#define S3C2410_ADCTSC_YM_SEN (1<<7)
+#define S3C2410_ADCTSC_YP_SEN (1<<6)
+#define S3C2410_ADCTSC_XM_SEN (1<<5)
+#define S3C2410_ADCTSC_XP_SEN (1<<4)
+#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3)
+#define S3C2410_ADCTSC_AUTO_PST (1<<2)
+#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0)
+
+/* ADCDAT0 Bits */
+#define S3C2410_ADCDAT0_UPDOWN (1<<15)
+#define S3C2410_ADCDAT0_AUTO_PST (1<<14)
+#define S3C2410_ADCDAT0_XY_PST (0x3<<12)
+#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF)
+
+/* ADCDAT1 Bits */
+#define S3C2410_ADCDAT1_UPDOWN (1<<15)
+#define S3C2410_ADCDAT1_AUTO_PST (1<<14)
+#define S3C2410_ADCDAT1_XY_PST (0x3<<12)
+#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF)
+
+
#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
#define INT_DOWN (0)
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 133f9c45744a..8c983ad774f6 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_LPC32XX) += irq-lpc32xx.o
obj-$(CONFIG_ARCH_MMP) += irq-mmp.o
obj-$(CONFIG_IRQ_MXS) += irq-mxs.o
obj-$(CONFIG_ARCH_TEGRA) += irq-tegra.o
-obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o
obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o
obj-$(CONFIG_CLPS711X_IRQCHIP) += irq-clps711x.o
obj-$(CONFIG_OMPIC) += irq-ompic.o
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index 9b5e67664ba3..3c0c7aa63b8c 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -16,8 +16,6 @@
#include <linux/module.h>
#include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-gpio.h>
-
/* our context */
struct s3c24xx_gpio_led {
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 9c89a5b780e8..9f387daa764a 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -289,7 +289,7 @@ config MMC_SDHCI_TEGRA
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
- depends on MMC_SDHCI && PLAT_SAMSUNG
+ depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS)
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 444b2769ae2c..52d1f5e9d7c7 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -24,11 +24,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/mmc/slot-gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <mach/dma.h>
-#include <mach/gpio-samsung.h>
-
#include <linux/platform_data/mmc-s3cmci.h>
#include "s3cmci.h"
@@ -307,7 +302,8 @@ static inline void clear_imask(struct s3cmci_host *host)
static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
{
if (host->sdio_irqen) {
- if (gpio_get_value(S3C2410_GPE(8)) == 0) {
+ if (host->pdata->bus[3] &&
+ gpiod_get_value(host->pdata->bus[3]) == 0) {
pr_debug("%s: signalling irq\n", __func__);
mmc_signal_sdio_irq(host->mmc);
}
@@ -1206,33 +1202,20 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
- /* Configure GPE5...GPE10 pins in SD mode */
- if (!host->pdev->dev.of_node)
- s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
- if (host->pdata->set_power)
- host->pdata->set_power(ios->power_mode, ios->vdd);
-
if (!host->is2440)
mci_con |= S3C2410_SDICON_FIFORESET;
-
break;
case MMC_POWER_OFF:
default:
- if (!host->pdev->dev.of_node)
- gpio_direction_output(S3C2410_GPE(5), 0);
-
if (host->is2440)
mci_con |= S3C2440_SDICON_SDRESET;
-
- if (host->pdata->set_power)
- host->pdata->set_power(ios->power_mode, ios->vdd);
-
break;
}
+ if (host->pdata->set_power)
+ host->pdata->set_power(ios->power_mode, ios->vdd);
+
s3cmci_set_clk(host, ios);
/* Set CLOCK_ENABLE */
@@ -1310,13 +1293,6 @@ static const struct mmc_host_ops s3cmci_ops = {
.enable_sdio_irq = s3cmci_enable_sdio_irq,
};
-static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
- /* This is currently here to avoid a number of if (host->pdata)
- * checks. Any zero fields to ensure reasonable defaults are picked. */
- .no_wprotect = 1,
- .no_detect = 1,
-};
-
#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
static int s3cmci_cpufreq_transition(struct notifier_block *nb,
@@ -1470,24 +1446,21 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host)
int i, ret;
host->is2440 = platform_get_device_id(pdev)->driver_data;
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "need platform data");
+ return -ENXIO;
+ }
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
- ret = gpio_request(i, dev_name(&pdev->dev));
- if (ret) {
+ for (i = 0; i < 6; i++) {
+ pdata->bus[i] = devm_gpiod_get_index(&pdev->dev, "bus", i,
+ GPIOD_OUT_LOW);
+ if (IS_ERR(pdata->bus[i])) {
dev_err(&pdev->dev, "failed to get gpio %d\n", i);
-
- for (i--; i >= S3C2410_GPE(5); i--)
- gpio_free(i);
-
- return ret;
+ return PTR_ERR(pdata->bus[i]);
}
}
- if (!pdev->dev.platform_data)
- pdev->dev.platform_data = &s3cmci_def_pdata;
-
- pdata = pdev->dev.platform_data;
-
if (pdata->no_wprotect)
mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
@@ -1542,7 +1515,6 @@ static int s3cmci_probe(struct platform_device *pdev)
struct s3cmci_host *host;
struct mmc_host *mmc;
int ret;
- int i;
mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
if (!mmc) {
@@ -1586,7 +1558,7 @@ static int s3cmci_probe(struct platform_device *pdev)
"failed to get io memory region resource.\n");
ret = -ENOENT;
- goto probe_free_gpio;
+ goto probe_free_host;
}
host->mem = request_mem_region(host->mem->start,
@@ -1595,7 +1567,7 @@ static int s3cmci_probe(struct platform_device *pdev)
if (!host->mem) {
dev_err(&pdev->dev, "failed to request io memory region.\n");
ret = -ENOENT;
- goto probe_free_gpio;
+ goto probe_free_host;
}
host->base = ioremap(host->mem->start, resource_size(host->mem));
@@ -1719,11 +1691,6 @@ static int s3cmci_probe(struct platform_device *pdev)
probe_free_mem_region:
release_mem_region(host->mem->start, resource_size(host->mem));
- probe_free_gpio:
- if (!pdev->dev.of_node)
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
- gpio_free(i);
-
probe_free_host:
mmc_free_host(mmc);
@@ -1749,7 +1716,6 @@ static int s3cmci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct s3cmci_host *host = mmc_priv(mmc);
- int i;
s3cmci_shutdown(pdev);
@@ -1762,10 +1728,6 @@ static int s3cmci_remove(struct platform_device *pdev)
free_irq(host->irq, host);
- if (!pdev->dev.of_node)
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
- gpio_free(i);
-
iounmap(host->base);
release_mem_region(host->mem->start, resource_size(host->mem));
diff --git a/drivers/power/supply/s3c_adc_battery.c b/drivers/power/supply/s3c_adc_battery.c
index 3d00b35cafc9..60b7f41ab063 100644
--- a/drivers/power/supply/s3c_adc_battery.c
+++ b/drivers/power/supply/s3c_adc_battery.c
@@ -22,7 +22,7 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <plat/adc.h>
+#include <linux/soc/samsung/s3c-adc.h>
#define BAT_POLL_INTERVAL 10000 /* ms */
#define JITTER_DELAY 500 /* ms */
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 7dbcf6973d33..9448e4ca8c73 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -410,7 +410,7 @@ config PWM_ROCKCHIP
config PWM_SAMSUNG
tristate "Samsung PWM support"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
help
Generic PWM framework driver for Samsung.
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index 264185664594..5abe82079d2e 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -35,7 +35,53 @@ config EXYNOS_PMU_ARM_DRIVERS
config EXYNOS_PM_DOMAINS
bool "Exynos PM domains" if COMPILE_TEST
- depends on PM_GENERIC_DOMAINS || COMPILE_TEST
+ depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST
+
+config SAMSUNG_PM_DEBUG
+ bool "Samsung PM Suspend debug"
+ depends on PM && DEBUG_KERNEL
+ depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
+ depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
+ help
+ Say Y here if you want verbose debugging from the PM Suspend and
+ Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
+ for more information.
+
+config S3C_PM_DEBUG_LED_SMDK
+ bool "SMDK LED suspend/resume debugging"
+ depends on PM && (MACH_SMDK6410)
+ help
+ Say Y here to enable the use of the SMDK LEDs on the baseboard
+ for debugging of the state of the suspend and resume process.
+
+ Note, this currently only works for S3C64XX based SMDK boards.
+
+config SAMSUNG_PM_CHECK
+ bool "S3C2410 PM Suspend Memory CRC"
+ depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
+ select CRC32
+ help
+ Enable the PM code's memory area checksum over sleep. This option
+ will generate CRCs of all blocks of memory, and store them before
+ going to sleep. The blocks are then checked on resume for any
+ errors.
+
+ Note, this can take several seconds depending on memory size
+ and CPU speed.
+
+ See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+ int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+ depends on PM && SAMSUNG_PM_CHECK
+ default 64
+ help
+ Set the chunksize in Kilobytes of the CRC for checking memory
+ corruption over suspend and resume. A smaller value will mean that
+ the CRC data block will take more memory, but will identify any
+ faults with better precision.
+
+ See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
config EXYNOS_REGULATOR_COUPLER
bool "Exynos SoC Regulator Coupler" if COMPILE_TEST
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index ecc3a32f6406..59e8e9453f27 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -10,3 +10,6 @@ obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \
exynos5250-pmu.o exynos5420-pmu.o
obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o
+
+obj-$(CONFIG_SAMSUNG_PM_CHECK) += s3c-pm-check.o
+obj-$(CONFIG_SAMSUNG_PM_DEBUG) += s3c-pm-debug.o
diff --git a/arch/arm/plat-samsung/pm-check.c b/drivers/soc/samsung/s3c-pm-check.c
index cd2c02c68bc3..ff3e099fc208 100644
--- a/arch/arm/plat-samsung/pm-check.c
+++ b/drivers/soc/samsung/s3c-pm-check.c
@@ -15,7 +15,7 @@
#include <linux/ioport.h>
#include <linux/slab.h>
-#include <plat/pm-common.h>
+#include <linux/soc/samsung/s3c-pm.h>
#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
diff --git a/arch/arm/plat-samsung/pm-debug.c b/drivers/soc/samsung/s3c-pm-debug.c
index b76b1e9ba4ae..b5ce0e9a41e5 100644
--- a/arch/arm/plat-samsung/pm-debug.c
+++ b/drivers/soc/samsung/s3c-pm-debug.c
@@ -15,17 +15,7 @@
#include <asm/mach/map.h>
-#include <plat/cpu.h>
-#include <plat/pm-common.h>
-
-#ifdef CONFIG_SAMSUNG_ATAGS
-#include <plat/pm.h>
-#include <mach/pm-core.h>
-#else
-static inline void s3c_pm_debug_init_uart(void) {}
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save) {}
-#endif
+#include <linux/soc/samsung/s3c-pm.h>
static struct pm_uart_save uart_save;
@@ -43,12 +33,6 @@ void s3c_pm_dbg(const char *fmt, ...)
printascii(buff);
}
-void s3c_pm_debug_init(void)
-{
- /* restart uart clocks so we can use them to output */
- s3c_pm_debug_init_uart();
-}
-
static inline void __iomem *s3c_pm_uart_base(void)
{
unsigned long paddr;
@@ -59,7 +43,7 @@ static inline void __iomem *s3c_pm_uart_base(void)
return (void __iomem *)vaddr;
}
-void s3c_pm_save_uarts(void)
+void s3c_pm_save_uarts(bool is_s3c2410)
{
void __iomem *regs = s3c_pm_uart_base();
struct pm_uart_save *save = &uart_save;
@@ -70,14 +54,14 @@ void s3c_pm_save_uarts(void)
save->umcon = __raw_readl(regs + S3C2410_UMCON);
save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
- if (!soc_is_s3c2410())
+ if (!is_s3c2410)
save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
S3C_PMDBG("UART[%p]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
regs, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
}
-void s3c_pm_restore_uarts(void)
+void s3c_pm_restore_uarts(bool is_s3c2410)
{
void __iomem *regs = s3c_pm_uart_base();
struct pm_uart_save *save = &uart_save;
@@ -90,6 +74,6 @@ void s3c_pm_restore_uarts(void)
__raw_writel(save->umcon, regs + S3C2410_UMCON);
__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
- if (!soc_is_s3c2410())
+ if (!is_s3c2410)
__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
}
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index c6ea760ea5f0..01b6c80d86c9 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -680,7 +680,7 @@ config SPI_S3C24XX_FIQ
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
- depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)
+ depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
help
SPI driver for Samsung S3C64XX and newer SoCs.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index cf955ea803cd..eba6fb607aa2 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -97,7 +97,6 @@ obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
-spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
obj-$(CONFIG_SPI_SH) += spi-sh.o
diff --git a/arch/arm/plat-samsung/include/plat/regs-spi.h b/drivers/spi/spi-s3c24xx-regs.h
index 607844311566..f51464ab5677 100644
--- a/arch/arm/plat-samsung/include/plat/regs-spi.h
+++ b/drivers/spi/spi-s3c24xx-regs.h
@@ -5,11 +5,8 @@
* S3C2410 SPI register definition
*/
-#ifndef __ASM_ARCH_REGS_SPI_H
-#define __ASM_ARCH_REGS_SPI_H
-
-#define S3C2410_SPI1 (0x20)
-#define S3C2412_SPI1 (0x100)
+#ifndef __SPI_S3C2410_H
+#define __SPI_S3C2410_H
#define S3C2410_SPCON (0x00)
@@ -41,4 +38,4 @@
#define S3C2410_SPTDAT (0x10)
#define S3C2410_SPRDAT (0x14)
-#endif /* __ASM_ARCH_REGS_SPI_H */
+#endif /* __SPI_S3C2410_H */
diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c
index 2cb3b611c294..9138a315aa4f 100644
--- a/drivers/spi/spi-s3c24xx.c
+++ b/drivers/spi/spi-s3c24xx.c
@@ -19,13 +19,12 @@
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/spi/s3c24xx.h>
+#include <linux/spi/s3c24xx-fiq.h>
#include <linux/module.h>
-#include <plat/regs-spi.h>
-
#include <asm/fiq.h>
-#include "spi-s3c24xx-fiq.h"
+#include "spi-s3c24xx-regs.h"
/**
* s3c24xx_spi_devstate - per device data
@@ -230,21 +229,6 @@ struct spi_fiq_code {
u8 data[];
};
-extern struct spi_fiq_code s3c24xx_spi_fiq_txrx;
-extern struct spi_fiq_code s3c24xx_spi_fiq_tx;
-extern struct spi_fiq_code s3c24xx_spi_fiq_rx;
-
-/**
- * ack_bit - turn IRQ into IRQ acknowledgement bit
- * @irq: The interrupt number
- *
- * Returns the bit to write to the interrupt acknowledge register.
- */
-static inline u32 ack_bit(unsigned int irq)
-{
- return 1 << (irq - IRQ_EINT0);
-}
-
/**
* s3c24xx_spi_tryfiq - attempt to claim and setup FIQ for transfer
* @hw: The hardware state.
@@ -261,6 +245,7 @@ static void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw)
struct pt_regs regs;
enum spi_fiq_mode mode;
struct spi_fiq_code *code;
+ u32 *ack_ptr = NULL;
int ret;
if (!hw->fiq_claimed) {
@@ -283,13 +268,10 @@ static void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw)
regs.uregs[fiq_rrx] = (long)hw->rx;
regs.uregs[fiq_rtx] = (long)hw->tx + 1;
regs.uregs[fiq_rcount] = hw->len - 1;
- regs.uregs[fiq_rirq] = (long)S3C24XX_VA_IRQ;
set_fiq_regs(&regs);
if (hw->fiq_mode != mode) {
- u32 *ack_ptr;
-
hw->fiq_mode = mode;
switch (mode) {
@@ -309,12 +291,10 @@ static void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw)
BUG_ON(!code);
ack_ptr = (u32 *)&code->data[code->ack_offset];
- *ack_ptr = ack_bit(hw->irq);
-
set_fiq_handler(&code->data, code->length);
}
- s3c24xx_set_fiq(hw->irq, true);
+ s3c24xx_set_fiq(hw->irq, ack_ptr, true);
hw->fiq_mode = mode;
hw->fiq_inuse = 1;
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 9409be982aa6..2a266b570c5e 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -235,7 +235,7 @@ config SERIAL_CLPS711X_CONSOLE
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index aaca1b0a2f59..7bd5182ce3ef 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -30,8 +30,6 @@
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
-#include <mach/regs-s3c2443-clock.h>
-
#define S3C_HSUDC_REG(x) (x)
/* Non-Indexed Registers */
@@ -186,53 +184,6 @@ static inline void __orr32(void __iomem *ptr, u32 val)
writel(readl(ptr) | val, ptr);
}
-static void s3c_hsudc_init_phy(void)
-{
- u32 cfg;
-
- cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
- writel(cfg, S3C2443_PWRCFG);
-
- cfg = readl(S3C2443_URSTCON);
- cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
- writel(cfg, S3C2443_URSTCON);
- mdelay(1);
-
- cfg = readl(S3C2443_URSTCON);
- cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
- writel(cfg, S3C2443_URSTCON);
-
- cfg = readl(S3C2443_PHYCTRL);
- cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
- cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
- writel(cfg, S3C2443_PHYCTRL);
-
- cfg = readl(S3C2443_PHYPWR);
- cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
- S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
- S3C2443_PHYPWR_ANALOG_PD);
- cfg |= S3C2443_PHYPWR_COMMON_ON;
- writel(cfg, S3C2443_PHYPWR);
-
- cfg = readl(S3C2443_UCLKCON);
- cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
- S3C2443_UCLKCON_TCLKEN);
- writel(cfg, S3C2443_UCLKCON);
-}
-
-static void s3c_hsudc_uninit_phy(void)
-{
- u32 cfg;
-
- cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
- writel(cfg, S3C2443_PWRCFG);
-
- writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
-
- cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
- writel(cfg, S3C2443_UCLKCON);
-}
-
/**
* s3c_hsudc_complete_request - Complete a transfer request.
* @hsep: Endpoint to which the request belongs.
@@ -1188,7 +1139,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,
pm_runtime_get_sync(hsudc->dev);
- s3c_hsudc_init_phy();
+ if (hsudc->pd->phy_init)
+ hsudc->pd->phy_init();
if (hsudc->pd->gpio_init)
hsudc->pd->gpio_init();
@@ -1210,7 +1162,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget)
spin_lock_irqsave(&hsudc->lock, flags);
hsudc->gadget.speed = USB_SPEED_UNKNOWN;
- s3c_hsudc_uninit_phy();
+ if (hsudc->pd->phy_uninit)
+ hsudc->pd->phy_uninit();
pm_runtime_put(hsudc->dev);
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index bc2e8eb737c3..f1ea51476add 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -36,15 +36,11 @@
#include <asm/byteorder.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-udc.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
-
#include "s3c2410_udc.h"
+#include "s3c2410_udc_regs.h"
#define DRIVER_DESC "S3C2410 USB Device Controller Gadget"
#define DRIVER_AUTHOR "Herbert Pötzl <herbert@13thfloor.at>, " \
@@ -57,6 +53,7 @@ static struct s3c2410_udc *the_controller;
static struct clk *udc_clock;
static struct clk *usb_bus_clock;
static void __iomem *base_addr;
+static int irq_usbd;
static u64 rsrc_start;
static u64 rsrc_len;
static struct dentry *s3c2410_udc_debugfs_root;
@@ -835,8 +832,6 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
}
}
-#include <mach/regs-irq.h>
-
/*
* s3c2410_udc_irq - interrupt handler
*/
@@ -977,7 +972,7 @@ static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev)
}
}
- dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD);
+ dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", irq_usbd);
/* Restore old index */
udc_write(idx, S3C2410_UDC_INDEX_REG);
@@ -1270,7 +1265,6 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
struct s3c2410_ep *ep = to_s3c2410_ep(_ep);
- struct s3c2410_udc *udc;
int retval = -EINVAL;
unsigned long flags;
struct s3c2410_request *req = NULL;
@@ -1283,8 +1277,6 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
if (!_ep || !_req)
return retval;
- udc = to_s3c2410_udc(ep->gadget);
-
local_irq_save(flags);
list_for_each_entry(req, &ep->queue, queue) {
@@ -1780,13 +1772,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
spin_lock_init(&udc->lock);
udc_info = dev_get_platdata(&pdev->dev);
- rsrc_start = S3C2410_PA_USBDEV;
- rsrc_len = S3C24XX_SZ_USBDEV;
-
- if (!request_mem_region(rsrc_start, rsrc_len, gadget_name))
- return -EBUSY;
-
- base_addr = ioremap(rsrc_start, rsrc_len);
+ base_addr = devm_platform_ioremap_resource(pdev, 0);
if (!base_addr) {
retval = -ENOMEM;
goto err_mem;
@@ -1798,17 +1784,19 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
s3c2410_udc_disable(udc);
s3c2410_udc_reinit(udc);
+ irq_usbd = platform_get_irq(pdev, 0);
+
/* irq setup after old hardware state is cleaned up */
- retval = request_irq(IRQ_USBD, s3c2410_udc_irq,
+ retval = request_irq(irq_usbd, s3c2410_udc_irq,
0, gadget_name, udc);
if (retval != 0) {
- dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval);
+ dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval);
retval = -EBUSY;
goto err_map;
}
- dev_dbg(dev, "got irq %i\n", IRQ_USBD);
+ dev_dbg(dev, "got irq %i\n", irq_usbd);
if (udc_info && udc_info->vbus_pin > 0) {
retval = gpio_request(udc_info->vbus_pin, "udc vbus");
@@ -1875,7 +1863,7 @@ err_gpio_claim:
if (udc_info && udc_info->vbus_pin > 0)
gpio_free(udc_info->vbus_pin);
err_int:
- free_irq(IRQ_USBD, udc);
+ free_irq(irq_usbd, udc);
err_map:
iounmap(base_addr);
err_mem:
@@ -1909,7 +1897,7 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
free_irq(irq, udc);
}
- free_irq(IRQ_USBD, udc);
+ free_irq(irq_usbd, udc);
iounmap(base_addr);
release_mem_region(rsrc_start, rsrc_len);
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h
index bdcaa8dd300f..68bdf3e5aac2 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.h
+++ b/drivers/usb/gadget/udc/s3c2410_udc.h
@@ -90,6 +90,7 @@ struct s3c2410_udc {
unsigned req_pending : 1;
u8 vbus;
struct dentry *regs_info;
+ int irq;
};
#define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget))
diff --git a/arch/arm/plat-samsung/include/plat/regs-udc.h b/drivers/usb/gadget/udc/s3c2410_udc_regs.h
index d8d2eeaca088..d8d2eeaca088 100644
--- a/arch/arm/plat-samsung/include/plat/regs-udc.h
+++ b/drivers/usb/gadget/udc/s3c2410_udc_regs.h
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
index 4c3434f261bb..1e46f7a788e5 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
+++ b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
@@ -7,6 +7,13 @@
#ifndef ___ASM_ARCH_REGS_LCD_H
#define ___ASM_ARCH_REGS_LCD_H
+/*
+ * a couple of values are used as platform data in
+ * include/linux/platform_data/fb-s3c2410.h and not
+ * duplicated here.
+ */
+#include <linux/platform_data/fb-s3c2410.h>
+
#define S3C2410_LCDREG(x) (x)
/* LCD control registers */
@@ -29,13 +36,6 @@
#define S3C2410_LCDCON1_STN8BPP (3<<1)
#define S3C2410_LCDCON1_STN12BPP (4<<1)
-#define S3C2410_LCDCON1_TFT1BPP (8<<1)
-#define S3C2410_LCDCON1_TFT2BPP (9<<1)
-#define S3C2410_LCDCON1_TFT4BPP (10<<1)
-#define S3C2410_LCDCON1_TFT8BPP (11<<1)
-#define S3C2410_LCDCON1_TFT16BPP (12<<1)
-#define S3C2410_LCDCON1_TFT24BPP (13<<1)
-
#define S3C2410_LCDCON1_ENVID (1)
#define S3C2410_LCDCON1_MODEMASK 0x1E
@@ -66,20 +66,6 @@
#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF)
-#define S3C2410_LCDCON5_BPP24BL (1<<12)
-#define S3C2410_LCDCON5_FRM565 (1<<11)
-#define S3C2410_LCDCON5_INVVCLK (1<<10)
-#define S3C2410_LCDCON5_INVVLINE (1<<9)
-#define S3C2410_LCDCON5_INVVFRAME (1<<8)
-#define S3C2410_LCDCON5_INVVD (1<<7)
-#define S3C2410_LCDCON5_INVVDEN (1<<6)
-#define S3C2410_LCDCON5_INVPWREN (1<<5)
-#define S3C2410_LCDCON5_INVLEND (1<<4)
-#define S3C2410_LCDCON5_PWREN (1<<3)
-#define S3C2410_LCDCON5_ENLEND (1<<2)
-#define S3C2410_LCDCON5_BSWP (1<<1)
-#define S3C2410_LCDCON5_HWSWP (1<<0)
-
/* framebuffer start addressed */
#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14)
#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18)
diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
index 6f8fa501583f..d8ae5258de46 100644
--- a/drivers/video/fbdev/s3c2410fb.c
+++ b/drivers/video/fbdev/s3c2410fb.c
@@ -29,19 +29,18 @@
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/io.h>
+#include <linux/platform_data/fb-s3c2410.h>
#include <asm/div64.h>
#include <asm/mach/map.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
-#include <mach/fb.h>
#ifdef CONFIG_PM
#include <linux/pm.h>
#endif
#include "s3c2410fb.h"
+#include "s3c2410fb-regs-lcd.h"
/* Debugging stuff */
static int debug = IS_BUILTIN(CONFIG_FB_S3C2410_DEBUG);
@@ -672,6 +671,9 @@ static inline void modify_gpio(void __iomem *reg,
{
unsigned long tmp;
+ if (!reg)
+ return;
+
tmp = readl(reg) & ~mask;
writel(tmp | set, reg);
}
@@ -702,10 +704,10 @@ static int s3c2410fb_init_registers(struct fb_info *info)
/* modify the gpio(s) with interrupts set (bjd) */
- modify_gpio(S3C2410_GPCUP, mach_info->gpcup, mach_info->gpcup_mask);
- modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask);
- modify_gpio(S3C2410_GPDUP, mach_info->gpdup, mach_info->gpdup_mask);
- modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask);
+ modify_gpio(mach_info->gpcup_reg, mach_info->gpcup, mach_info->gpcup_mask);
+ modify_gpio(mach_info->gpccon_reg, mach_info->gpccon, mach_info->gpccon_mask);
+ modify_gpio(mach_info->gpdup_reg, mach_info->gpdup, mach_info->gpdup_mask);
+ modify_gpio(mach_info->gpdcon_reg, mach_info->gpdcon, mach_info->gpdcon_mask);
local_irq_restore(flags);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ab7aad5a1e69..e4dd49895567 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -478,16 +478,10 @@ config IXP4XX_WATCHDOG
Say N if you are unsure.
-config HAVE_S3C2410_WATCHDOG
- bool
- help
- This will include watchdog timer support for Samsung SoCs. If
- you want to include watchdog support for any machine, kindly
- select this in the respective mach-XXXX/Kconfig file.
-
config S3C2410_WATCHDOG
tristate "S3C2410 Watchdog"
- depends on HAVE_S3C2410_WATCHDOG || COMPILE_TEST
+ depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \
+ COMPILE_TEST
select WATCHDOG_CORE
select MFD_SYSCON if ARCH_EXYNOS
help
diff --git a/include/linux/clk/samsung.h b/include/linux/clk/samsung.h
new file mode 100644
index 000000000000..79097e365f7f
--- /dev/null
+++ b/include/linux/clk/samsung.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __LINUX_CLK_SAMSUNG_H_
+#define __LINUX_CLK_SAMSUNG_H_
+
+#include <linux/compiler_types.h>
+
+struct device_node;
+
+#ifdef CONFIG_ARCH_S3C64XX
+void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
+ unsigned long xusbxti_f, bool s3c6400,
+ void __iomem *base);
+#else
+static inline void s3c64xx_clk_init(struct device_node *np,
+ unsigned long xtal_f,
+ unsigned long xusbxti_f,
+ bool s3c6400, void __iomem *base) { }
+#endif /* CONFIG_ARCH_S3C64XX */
+
+#ifdef CONFIG_S3C2410_COMMON_CLK
+void s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base);
+#else
+static inline void s3c2410_common_clk_init(struct device_node *np,
+ unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base) { }
+#endif /* CONFIG_S3C2410_COMMON_CLK */
+
+#ifdef CONFIG_S3C2412_COMMON_CLK
+void s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+ unsigned long ext_f, void __iomem *reg_base);
+#else
+static inline void s3c2412_common_clk_init(struct device_node *np,
+ unsigned long xti_f,
+ unsigned long ext_f,
+ void __iomem *reg_base) { }
+#endif /* CONFIG_S3C2412_COMMON_CLK */
+
+#ifdef CONFIG_S3C2443_COMMON_CLK
+void s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base);
+#else
+static inline void s3c2443_common_clk_init(struct device_node *np,
+ unsigned long xti_f,
+ int current_soc,
+ void __iomem *reg_base) { }
+#endif /* CONFIG_S3C2443_COMMON_CLK */
+
+#endif /* __LINUX_CLK_SAMSUNG_H_ */
diff --git a/include/linux/platform_data/clk-s3c2410.h b/include/linux/platform_data/clk-s3c2410.h
new file mode 100644
index 000000000000..7eb1cfa5409b
--- /dev/null
+++ b/include/linux/platform_data/clk-s3c2410.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_CLK_S3C2410_H_
+#define __LINUX_PLATFORM_DATA_CLK_S3C2410_H_
+
+/**
+ * struct s3c2410_clk_platform_data - platform data for S3C2410 clock driver
+ *
+ * @modify_misccr: Function to modify the MISCCR and return the new value
+ */
+struct s3c2410_clk_platform_data {
+ unsigned int (*modify_misccr)(unsigned int clr, unsigned int chg);
+};
+
+#endif /* __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ */
+
diff --git a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/include/linux/platform_data/fb-s3c2410.h
index 614240d768b4..10c11e6316d6 100644
--- a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
+++ b/include/linux/platform_data/fb-s3c2410.h
@@ -8,6 +8,8 @@
#ifndef __ASM_PLAT_FB_S3C2410_H
#define __ASM_PLAT_FB_S3C2410_H __FILE__
+#include <linux/compiler_types.h>
+
struct s3c2410fb_hw {
unsigned long lcdcon1;
unsigned long lcdcon2;
@@ -20,6 +22,17 @@ struct s3c2410fb_hw {
struct s3c2410fb_display {
/* LCD type */
unsigned type;
+#define S3C2410_LCDCON1_DSCAN4 (0<<5)
+#define S3C2410_LCDCON1_STN4 (1<<5)
+#define S3C2410_LCDCON1_STN8 (2<<5)
+#define S3C2410_LCDCON1_TFT (3<<5)
+
+#define S3C2410_LCDCON1_TFT1BPP (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP (13<<1)
/* Screen size */
unsigned short width;
@@ -40,6 +53,19 @@ struct s3c2410fb_display {
/* lcd configuration registers */
unsigned long lcdcon5;
+#define S3C2410_LCDCON5_BPP24BL (1<<12)
+#define S3C2410_LCDCON5_FRM565 (1<<11)
+#define S3C2410_LCDCON5_INVVCLK (1<<10)
+#define S3C2410_LCDCON5_INVVLINE (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME (1<<8)
+#define S3C2410_LCDCON5_INVVD (1<<7)
+#define S3C2410_LCDCON5_INVVDEN (1<<6)
+#define S3C2410_LCDCON5_INVPWREN (1<<5)
+#define S3C2410_LCDCON5_INVLEND (1<<4)
+#define S3C2410_LCDCON5_PWREN (1<<3)
+#define S3C2410_LCDCON5_ENLEND (1<<2)
+#define S3C2410_LCDCON5_BSWP (1<<1)
+#define S3C2410_LCDCON5_HWSWP (1<<0)
};
struct s3c2410fb_mach_info {
@@ -59,10 +85,15 @@ struct s3c2410fb_mach_info {
unsigned long gpdcon;
unsigned long gpdcon_mask;
+ void __iomem * gpccon_reg;
+ void __iomem * gpcup_reg;
+ void __iomem * gpdcon_reg;
+ void __iomem * gpdup_reg;
+
/* lpc3600 control register */
unsigned long lpcsel;
};
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+extern void s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
#endif /* __ASM_PLAT_FB_S3C2410_H */
diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h
index 33310b11cbdd..bacb86db3112 100644
--- a/include/linux/platform_data/mmc-s3cmci.h
+++ b/include/linux/platform_data/mmc-s3cmci.h
@@ -35,6 +35,7 @@ struct s3c24xx_mci_pdata {
unsigned long ocr_avail;
void (*set_power)(unsigned char power_mode,
unsigned short vdd);
+ struct gpio_desc *bus[6];
};
/**
@@ -44,6 +45,7 @@ struct s3c24xx_mci_pdata {
* Copy the platform data supplied by @pdata so that this can be marked
* __initdata.
*/
+extern void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd);
extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
#endif /* _ARCH_NCI_H */
diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h
index 4dc9b8760166..a170939832d5 100644
--- a/include/linux/platform_data/s3c-hsudc.h
+++ b/include/linux/platform_data/s3c-hsudc.h
@@ -26,6 +26,8 @@ struct s3c24xx_hsudc_platdata {
unsigned int epnum;
void (*gpio_init)(void);
void (*gpio_uninit)(void);
+ void (*phy_init)(void);
+ void (*phy_uninit)(void);
};
#endif /* __LINUX_USB_S3C_HSUDC_H */
diff --git a/arch/arm/plat-samsung/include/plat/adc.h b/include/linux/soc/samsung/s3c-adc.h
index 74d1a46408c1..591c94ef957d 100644
--- a/arch/arm/plat-samsung/include/plat/adc.h
+++ b/include/linux/soc/samsung/s3c-adc.h
@@ -7,8 +7,8 @@
* S3C ADC driver information
*/
-#ifndef __ASM_PLAT_ADC_H
-#define __ASM_PLAT_ADC_H __FILE__
+#ifndef __LINUX_SOC_SAMSUNG_S3C_ADC_H
+#define __LINUX_SOC_SAMSUNG_S3C_ADC_H __FILE__
struct s3c_adc_client;
struct platform_device;
@@ -29,4 +29,4 @@ extern struct s3c_adc_client *
extern void s3c_adc_release(struct s3c_adc_client *client);
-#endif /* __ASM_PLAT_ADC_H */
+#endif /* __LINUX_SOC_SAMSUNG_S3C_ADC_H */
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/include/linux/soc/samsung/s3c-cpu-freq.h
index 558892bcf9b6..63e88fd5dea2 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq.h
+++ b/include/linux/soc/samsung/s3c-cpu-freq.h
@@ -6,6 +6,8 @@
*
* S3C CPU frequency scaling support - driver and board
*/
+#ifndef __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H
+#define __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H
#include <linux/cpufreq.h>
@@ -139,3 +141,5 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
return 0;
}
#endif /* CONFIG_ARM_S3C_CPUFREQ */
+
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h
index 2c7cf2665634..3b278afb769b 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/include/linux/soc/samsung/s3c-cpufreq-core.h
@@ -6,8 +6,10 @@
*
* S3C CPU frequency scaling support - core support
*/
+#ifndef __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H
+#define __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H
-#include <plat/cpu-freq.h>
+#include <linux/soc/samsung/s3c-cpu-freq.h>
struct seq_file;
@@ -246,6 +248,7 @@ extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
+extern void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
#else
#define s3c2412_iotiming_debugfs NULL
#define s3c2412_iotiming_calc NULL
@@ -285,3 +288,12 @@ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
return index + 1;
}
+
+u32 s3c2440_read_camdivn(void);
+void s3c2440_write_camdivn(u32 camdiv);
+u32 s3c24xx_read_clkdivn(void);
+void s3c24xx_write_clkdivn(u32 clkdiv);
+u32 s3c24xx_read_mpllcon(void);
+void s3c24xx_write_locktime(u32 locktime);
+
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/pm-common.h b/include/linux/soc/samsung/s3c-pm.h
index 1268bae04234..f9164559c99f 100644
--- a/arch/arm/plat-samsung/include/plat/pm-common.h
+++ b/include/linux/soc/samsung/s3c-pm.h
@@ -7,34 +7,10 @@
* Written by Ben Dooks, <ben@simtec.co.uk>
*/
-#ifndef __PLAT_SAMSUNG_PM_COMMON_H
-#define __PLAT_SAMSUNG_PM_COMMON_H __FILE__
+#ifndef __LINUX_SOC_SAMSUNG_S3C_PM_H
+#define __LINUX_SOC_SAMSUNG_S3C_PM_H __FILE__
-#include <linux/irq.h>
-
-/* sleep save info */
-
-/**
- * struct sleep_save - save information for shared peripherals.
- * @reg: Pointer to the register to save.
- * @val: Holder for the value saved from reg.
- *
- * This describes a list of registers which is used by the pm core and
- * other subsystem to save and restore register values over suspend.
- */
-struct sleep_save {
- void __iomem *reg;
- unsigned long val;
-};
-
-#define SAVE_ITEM(x) \
- { .reg = (x) }
-
-/* helper functions to save/restore lists of registers. */
-
-extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
+#include <linux/types.h>
/* PM debug functions */
@@ -69,25 +45,26 @@ struct pm_uart_save {
*/
extern void s3c_pm_dbg(const char *msg, ...);
-/**
- * s3c_pm_debug_init() - suspend/resume low level debug initialization.
- * @base: Virtual base of UART to use for suspend/resume debugging.
- *
- * This function needs to be called before S3C_PMDBG() can be used, to set up
- * UART port base address and configuration.
- */
-extern void s3c_pm_debug_init(void);
-
#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
-extern void s3c_pm_save_uarts(void);
-extern void s3c_pm_restore_uarts(void);
+extern void s3c_pm_save_uarts(bool is_s3c24xx);
+extern void s3c_pm_restore_uarts(bool is_s3c24xx);
+
+#ifdef CONFIG_ARCH_S3C64XX
+extern void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save);
+#else
+static inline void
+s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
+{
+}
+#endif
+
#else
#define S3C_PMDBG(fmt...) pr_debug(fmt)
-#define s3c_pm_debug_init() do { } while (0)
-static inline void s3c_pm_save_uarts(void) { }
-static inline void s3c_pm_restore_uarts(void) { }
+static inline void s3c_pm_save_uarts(bool is_s3c24xx) { }
+static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { }
#endif
/* suspend memory checking */
@@ -104,4 +81,14 @@ extern void s3c_pm_check_store(void);
#define s3c_pm_check_store() do { } while (0)
#endif
+/* system device subsystems */
+
+extern struct bus_type s3c2410_subsys;
+extern struct bus_type s3c2410a_subsys;
+extern struct bus_type s3c2412_subsys;
+extern struct bus_type s3c2416_subsys;
+extern struct bus_type s3c2440_subsys;
+extern struct bus_type s3c2442_subsys;
+extern struct bus_type s3c2443_subsys;
+
#endif
diff --git a/drivers/spi/spi-s3c24xx-fiq.h b/include/linux/spi/s3c24xx-fiq.h
index 7786b0ea56ec..d2842ac1de27 100644
--- a/drivers/spi/spi-s3c24xx-fiq.h
+++ b/include/linux/spi/s3c24xx-fiq.h
@@ -7,11 +7,19 @@
* S3C24XX SPI - FIQ pseudo-DMA transfer support
*/
+#ifndef __LINUX_SPI_S3C24XX_FIQ_H
+#define __LINUX_SPI_S3C24XX_FIQ_H __FILE__
+
/* We have R8 through R13 to play with */
#ifdef __ASSEMBLY__
#define __REG_NR(x) r##x
#else
+
+extern struct spi_fiq_code s3c24xx_spi_fiq_txrx;
+extern struct spi_fiq_code s3c24xx_spi_fiq_tx;
+extern struct spi_fiq_code s3c24xx_spi_fiq_rx;
+
#define __REG_NR(x) (x)
#endif
@@ -21,3 +29,5 @@
#define fiq_rtx __REG_NR(11)
#define fiq_rcount __REG_NR(12)
#define fiq_rirq __REG_NR(13)
+
+#endif /* __LINUX_SPI_S3C24XX_FIQ_H */
diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h
index c91d10b82f08..440a71593162 100644
--- a/include/linux/spi/s3c24xx.h
+++ b/include/linux/spi/s3c24xx.h
@@ -20,6 +20,6 @@ struct s3c2410_spi_info {
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
};
-extern int s3c24xx_set_fiq(unsigned int irq, bool on);
+extern int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on);
#endif /* __LINUX_SPI_S3C24XX_H */
diff --git a/include/media/drv-intf/s3c_camif.h b/include/media/drv-intf/s3c_camif.h
index d1200b40f53a..f746851a5ce6 100644
--- a/include/media/drv-intf/s3c_camif.h
+++ b/include/media/drv-intf/s3c_camif.h
@@ -35,8 +35,4 @@ struct s3c_camif_plat_data {
int (*gpio_put)(void);
};
-/* Platform default helper functions */
-int s3c_camif_gpio_get(void);
-int s3c_camif_gpio_put(void);
-
#endif /* MEDIA_S3C_CAMIF_ */
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 1431be4ed054..a2221ebb1b6a 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
depends on COMMON_CLK
select SND_SOC_GENERIC_DMAENGINE_PCM
help
diff --git a/sound/soc/samsung/h1940_uda1380.c b/sound/soc/samsung/h1940_uda1380.c
index b8f0057a0510..8aa78ff640f5 100644
--- a/sound/soc/samsung/h1940_uda1380.c
+++ b/sound/soc/samsung/h1940_uda1380.c
@@ -15,9 +15,6 @@
#include <sound/jack.h>
#include "regs-iis.h"
-#include <asm/mach-types.h>
-
-#include <mach/gpio-samsung.h>
#include "s3c24xx-i2s.h"
static const unsigned int rates[] = {
@@ -31,6 +28,8 @@ static const struct snd_pcm_hw_constraint_list hw_rates = {
.list = rates,
};
+static struct gpio_desc *gpiod_speaker_power;
+
static struct snd_soc_jack hp_jack;
static struct snd_soc_jack_pin hp_jack_pins[] = {
@@ -47,7 +46,6 @@ static struct snd_soc_jack_pin hp_jack_pins[] = {
static struct snd_soc_jack_gpio hp_jack_gpios[] = {
{
- .gpio = S3C2410_GPG(4),
.name = "hp-gpio",
.report = SND_JACK_HEADPHONE,
.invert = 1,
@@ -123,9 +121,9 @@ static int h1940_spk_power(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
- gpio_set_value(S3C_GPIO_END + 9, 1);
+ gpiod_set_value(gpiod_speaker_power, 1);
else
- gpio_set_value(S3C_GPIO_END + 9, 0);
+ gpiod_set_value(gpiod_speaker_power, 0);
return 0;
}
@@ -151,8 +149,6 @@ static const struct snd_soc_dapm_route audio_map[] = {
{"VINM", NULL, "Mic Jack"},
};
-static struct platform_device *s3c24xx_snd_device;
-
static int h1940_uda1380_init(struct snd_soc_pcm_runtime *rtd)
{
snd_soc_card_jack_new(rtd->card, "Headphone Jack", SND_JACK_HEADPHONE,
@@ -194,55 +190,34 @@ static struct snd_soc_card h1940_asoc = {
.num_dapm_routes = ARRAY_SIZE(audio_map),
};
-static int __init h1940_init(void)
+static int h1940_probe(struct platform_device *pdev)
{
- int ret;
+ struct device *dev = &pdev->dev;
- if (!machine_is_h1940())
- return -ENODEV;
+ h1940_asoc.dev = dev;
+ hp_jack_gpios[0].gpiod_dev = dev;
+ gpiod_speaker_power = devm_gpiod_get(&pdev->dev, "speaker-power",
+ GPIOD_OUT_LOW);
- /* configure some gpios */
- ret = gpio_request(S3C_GPIO_END + 9, "speaker-power");
- if (ret)
- goto err_out;
-
- ret = gpio_direction_output(S3C_GPIO_END + 9, 0);
- if (ret)
- goto err_gpio;
-
- s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
- if (!s3c24xx_snd_device) {
- ret = -ENOMEM;
- goto err_gpio;
+ if (IS_ERR(gpiod_speaker_power)) {
+ dev_err(dev, "Could not get gpio\n");
+ return PTR_ERR(gpiod_speaker_power);
}
- platform_set_drvdata(s3c24xx_snd_device, &h1940_asoc);
- ret = platform_device_add(s3c24xx_snd_device);
-
- if (ret)
- goto err_plat;
-
- return 0;
-
-err_plat:
- platform_device_put(s3c24xx_snd_device);
-err_gpio:
- gpio_free(S3C_GPIO_END + 9);
-
-err_out:
- return ret;
-}
-
-static void __exit h1940_exit(void)
-{
- platform_device_unregister(s3c24xx_snd_device);
- gpio_free(S3C_GPIO_END + 9);
+ return devm_snd_soc_register_card(dev, &h1940_asoc);
}
-module_init(h1940_init);
-module_exit(h1940_exit);
+static struct platform_driver h1940_audio_driver = {
+ .driver = {
+ .name = "h1940-audio",
+ .pm = &snd_soc_pm_ops,
+ },
+ .probe = h1940_probe,
+};
+module_platform_driver(h1940_audio_driver);
/* Module information */
MODULE_AUTHOR("Arnaud Patard, Vasily Khoruzhick");
MODULE_DESCRIPTION("ALSA SoC H1940");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:h1940-audio");
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index 54317e0f68f8..9266070e0181 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -11,14 +11,11 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <sound/soc.h>
-#include <mach/gpio-samsung.h>
-#include <asm/mach-types.h>
#include "regs-iis.h"
-
#include "../codecs/wm8753.h"
#include "s3c24xx-i2s.h"
@@ -166,6 +163,7 @@ static struct snd_soc_ops neo1973_voice_ops = {
.hw_free = neo1973_voice_hw_free,
};
+static struct gpio_desc *gpiod_hp_in, *gpiod_amp_shut;
static int gta02_speaker_enabled;
static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
@@ -173,7 +171,7 @@ static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
{
gta02_speaker_enabled = ucontrol->value.integer.value[0];
- gpio_set_value(S3C2410_GPJ(2), !gta02_speaker_enabled);
+ gpiod_set_value(gpiod_hp_in, !gta02_speaker_enabled);
return 0;
}
@@ -188,7 +186,7 @@ static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
static int lm4853_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- gpio_set_value(S3C2410_GPJ(1), SND_SOC_DAPM_EVENT_OFF(event));
+ gpiod_set_value(gpiod_amp_shut, SND_SOC_DAPM_EVENT_OFF(event));
return 0;
}
@@ -308,13 +306,8 @@ static struct snd_soc_codec_conf neo1973_codec_conf[] = {
},
};
-static const struct gpio neo1973_gta02_gpios[] = {
- { S3C2410_GPJ(2), GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
- { S3C2410_GPJ(1), GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
-};
-
static struct snd_soc_card neo1973 = {
- .name = "neo1973",
+ .name = "neo1973gta02",
.owner = THIS_MODULE,
.dai_link = neo1973_dai,
.num_links = ARRAY_SIZE(neo1973_dai),
@@ -332,62 +325,36 @@ static struct snd_soc_card neo1973 = {
.fully_routed = true,
};
-static struct platform_device *neo1973_snd_device;
-
-static int __init neo1973_init(void)
+static int neo1973_probe(struct platform_device *pdev)
{
- int ret;
-
- if (!machine_is_neo1973_gta02())
- return -ENODEV;
+ struct device *dev = &pdev->dev;
- if (machine_is_neo1973_gta02()) {
- neo1973.name = "neo1973gta02";
- neo1973.num_aux_devs = 1;
-
- ret = gpio_request_array(neo1973_gta02_gpios,
- ARRAY_SIZE(neo1973_gta02_gpios));
- if (ret)
- return ret;
+ gpiod_hp_in = devm_gpiod_get(dev, "hp", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiod_hp_in)) {
+ dev_err(dev, "missing gpio %s\n", "hp");
+ return PTR_ERR(gpiod_hp_in);
}
-
- neo1973_snd_device = platform_device_alloc("soc-audio", -1);
- if (!neo1973_snd_device) {
- ret = -ENOMEM;
- goto err_gpio_free;
+ gpiod_amp_shut = devm_gpiod_get(dev, "amp-shut", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiod_amp_shut)) {
+ dev_err(dev, "missing gpio %s\n", "amp-shut");
+ return PTR_ERR(gpiod_amp_shut);
}
- platform_set_drvdata(neo1973_snd_device, &neo1973);
- ret = platform_device_add(neo1973_snd_device);
-
- if (ret)
- goto err_put_device;
-
- return 0;
-
-err_put_device:
- platform_device_put(neo1973_snd_device);
-err_gpio_free:
- if (machine_is_neo1973_gta02()) {
- gpio_free_array(neo1973_gta02_gpios,
- ARRAY_SIZE(neo1973_gta02_gpios));
- }
- return ret;
+ neo1973.dev = dev;
+ return devm_snd_soc_register_card(dev, &neo1973);
}
-module_init(neo1973_init);
-
-static void __exit neo1973_exit(void)
-{
- platform_device_unregister(neo1973_snd_device);
- if (machine_is_neo1973_gta02()) {
- gpio_free_array(neo1973_gta02_gpios,
- ARRAY_SIZE(neo1973_gta02_gpios));
- }
-}
-module_exit(neo1973_exit);
+struct platform_driver neo1973_audio = {
+ .driver = {
+ .name = "neo1973-audio",
+ .pm = &snd_soc_pm_ops,
+ },
+ .probe = neo1973_probe,
+};
+module_platform_driver(neo1973_audio);
/* Module information */
MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org, www.openmoko.org");
MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 and Frerunner");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:neo1973-audio");
diff --git a/sound/soc/samsung/rx1950_uda1380.c b/sound/soc/samsung/rx1950_uda1380.c
index 08f7c82aedb6..400a7f77c711 100644
--- a/sound/soc/samsung/rx1950_uda1380.c
+++ b/sound/soc/samsung/rx1950_uda1380.c
@@ -12,16 +12,13 @@
// Vasily Khoruzhick <anarsoul@gmail.com>
#include <linux/types.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <sound/soc.h>
#include <sound/jack.h>
-#include <mach/gpio-samsung.h>
#include "regs-iis.h"
-#include <asm/mach-types.h>
-
#include "s3c24xx-i2s.h"
static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd);
@@ -58,7 +55,6 @@ static struct snd_soc_jack_pin hp_jack_pins[] = {
static struct snd_soc_jack_gpio hp_jack_gpios[] = {
[0] = {
- .gpio = S3C2410_GPG(12),
.name = "hp-gpio",
.report = SND_JACK_HEADPHONE,
.invert = 1,
@@ -123,8 +119,6 @@ static struct snd_soc_card rx1950_asoc = {
.num_dapm_routes = ARRAY_SIZE(audio_map),
};
-static struct platform_device *s3c24xx_snd_device;
-
static int rx1950_startup(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
@@ -134,13 +128,15 @@ static int rx1950_startup(struct snd_pcm_substream *substream)
&hw_rates);
}
+struct gpio_desc *gpiod_speaker_power;
+
static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
- gpio_set_value(S3C2410_GPA(1), 1);
+ gpiod_set_value(gpiod_speaker_power, 1);
else
- gpio_set_value(S3C2410_GPA(1), 0);
+ gpiod_set_value(gpiod_speaker_power, 0);
return 0;
}
@@ -214,57 +210,35 @@ static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd)
return 0;
}
-static int __init rx1950_init(void)
+static int rx1950_probe(struct platform_device *pdev)
{
- int ret;
-
- if (!machine_is_rx1950())
- return -ENODEV;
+ struct device *dev = &pdev->dev;
/* configure some gpios */
- ret = gpio_request(S3C2410_GPA(1), "speaker-power");
- if (ret)
- goto err_gpio;
-
- ret = gpio_direction_output(S3C2410_GPA(1), 0);
- if (ret)
- goto err_gpio_conf;
-
- s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
- if (!s3c24xx_snd_device) {
- ret = -ENOMEM;
- goto err_plat_alloc;
- }
-
- platform_set_drvdata(s3c24xx_snd_device, &rx1950_asoc);
- ret = platform_device_add(s3c24xx_snd_device);
-
- if (ret) {
- platform_device_put(s3c24xx_snd_device);
- goto err_plat_add;
+ gpiod_speaker_power = devm_gpiod_get(dev, "speaker-power", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod_speaker_power)) {
+ dev_err(dev, "cannot get gpio\n");
+ return PTR_ERR(gpiod_speaker_power);
}
- return 0;
-
-err_plat_add:
-err_plat_alloc:
-err_gpio_conf:
- gpio_free(S3C2410_GPA(1));
+ hp_jack_gpios[0].gpiod_dev = dev;
+ rx1950_asoc.dev = dev;
-err_gpio:
- return ret;
+ return devm_snd_soc_register_card(dev, &rx1950_asoc);
}
-static void __exit rx1950_exit(void)
-{
- platform_device_unregister(s3c24xx_snd_device);
- gpio_free(S3C2410_GPA(1));
-}
+struct platform_driver rx1950_audio = {
+ .driver = {
+ .name = "rx1950-audio",
+ .pm = &snd_soc_pm_ops,
+ },
+ .probe = rx1950_probe,
+};
-module_init(rx1950_init);
-module_exit(rx1950_exit);
+module_platform_driver(rx1950_audio);
/* Module information */
MODULE_AUTHOR("Vasily Khoruzhick");
MODULE_DESCRIPTION("ALSA SoC RX1950");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rx1950-audio");
diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
index ed21786104a1..e9481187a08c 100644
--- a/sound/soc/samsung/s3c-i2s-v2.c
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -616,8 +616,7 @@ int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate);
int s3c_i2sv2_probe(struct snd_soc_dai *dai,
- struct s3c_i2sv2_info *i2s,
- unsigned long base)
+ struct s3c_i2sv2_info *i2s)
{
struct device *dev = dai->dev;
unsigned int iismod;
diff --git a/sound/soc/samsung/s3c-i2s-v2.h b/sound/soc/samsung/s3c-i2s-v2.h
index fe42b77999fd..8c6fc0d3d77e 100644
--- a/sound/soc/samsung/s3c-i2s-v2.h
+++ b/sound/soc/samsung/s3c-i2s-v2.h
@@ -83,8 +83,7 @@ extern int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
* @base: The base address for the registers.
*/
extern int s3c_i2sv2_probe(struct snd_soc_dai *dai,
- struct s3c_i2sv2_info *i2s,
- unsigned long base);
+ struct s3c_i2sv2_info *i2s);
/**
* s3c_i2sv2_cleanup - cleanup resources allocated in s3c_i2sv2_probe
diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c
index b35d828c1cfe..81f416ac457e 100644
--- a/sound/soc/samsung/s3c2412-i2s.c
+++ b/sound/soc/samsung/s3c2412-i2s.c
@@ -19,9 +19,6 @@
#include <sound/soc.h>
#include <sound/pcm_params.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
-
#include "dma.h"
#include "regs-i2s-v2.h"
#include "s3c2412-i2s.h"
@@ -49,7 +46,7 @@ static int s3c2412_i2s_probe(struct snd_soc_dai *dai)
snd_soc_dai_init_dma_data(dai, &s3c2412_i2s_pcm_stereo_out,
&s3c2412_i2s_pcm_stereo_in);
- ret = s3c_i2sv2_probe(dai, &s3c2412_i2s, S3C2410_PA_IIS);
+ ret = s3c_i2sv2_probe(dai, &s3c2412_i2s);
if (ret)
return ret;
@@ -70,10 +67,6 @@ static int s3c2412_i2s_probe(struct snd_soc_dai *dai)
if (ret)
goto err;
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
return 0;
err:
diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c
index 60bfaed5f7a6..50c08008aacb 100644
--- a/sound/soc/samsung/s3c24xx-i2s.c
+++ b/sound/soc/samsung/s3c24xx-i2s.c
@@ -18,10 +18,7 @@
#include <sound/soc.h>
#include <sound/pcm_params.h>
-#include <mach/gpio-samsung.h>
-#include <plat/gpio-cfg.h>
#include "regs-iis.h"
-
#include "dma.h"
#include "s3c24xx-i2s.h"
@@ -348,10 +345,6 @@ static int s3c24xx_i2s_probe(struct snd_soc_dai *dai)
if (ret)
return ret;
- /* Configure the I2S pins (GPE0...GPE4) in correct mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON);
s3c24xx_snd_txctrl(0);