summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRoland Stigge <stigge@antcom.de>2012-06-14 16:16:18 +0200
committerRoland Stigge <stigge@antcom.de>2012-06-14 16:16:18 +0200
commitc70426f1534a7d8e52e478ce67fd4634cc588741 (patch)
tree8ca73976d4ea43c4ecbcc0681b324d0215e1ca3f
parent2c7fa28622d8c00ca41f0362d11c52d9f404f543 (diff)
downloadlinux-c70426f1534a7d8e52e478ce67fd4634cc588741.tar.gz
ARM: LPC32xx: DT conversion of Standard UARTs
This patch switches from static serial driver initialization to devicetree configuration. This way, the Standard UARTs of the LPC32xx SoC can be enabled individually via DT. E.g., instead of Kconfig configuration, the phy3250.dts activates UARTs 3 and 5. Signed-off-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/boot/dts/lpc32xx.dtsi34
-rw-r--r--arch/arm/boot/dts/phy3250.dts8
-rw-r--r--arch/arm/mach-lpc32xx/Kconfig32
-rw-r--r--arch/arm/mach-lpc32xx/serial.c85
5 files changed, 35 insertions, 126 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 84449dd8f031..973d5380a431 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1019,8 +1019,6 @@ source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
-source "arch/arm/mach-lpc32xx/Kconfig"
-
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index a9b2a6a22024..acb68171d04d 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -126,24 +126,42 @@
reg = <0x2009C000 0x1000>;
};
+ /* UART5 first since it is the default console, ttyS0 */
+ uart5: serial@40090000 {
+ /* actually, ns16550a w/ 64 byte fifos! */
+ compatible = "nxp,lpc3220-uart";
+ reg = <0x40090000 0x1000>;
+ interrupts = <9 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
uart3: serial@40080000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-uart";
reg = <0x40080000 0x1000>;
+ interrupts = <7 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
};
uart4: serial@40088000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-uart";
reg = <0x40088000 0x1000>;
- };
-
- uart5: serial@40090000 {
- compatible = "nxp,serial";
- reg = <0x40090000 0x1000>;
+ interrupts = <8 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
};
uart6: serial@40098000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-uart";
reg = <0x40098000 0x1000>;
+ interrupts = <10 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
};
i2c1: i2c@400A0000 {
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index d5432378f234..57d4961372d4 100644
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -94,6 +94,14 @@
};
apb {
+ uart5: serial@40090000 {
+ status = "okay";
+ };
+
+ uart3: serial@40080000 {
+ status = "okay";
+ };
+
i2c1: i2c@400A0000 {
clock-frequency = <100000>;
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
deleted file mode 100644
index e0b3eee83834..000000000000
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-if ARCH_LPC32XX
-
-menu "Individual UART enable selections"
-
-config ARCH_LPC32XX_UART3_SELECT
- bool "Add support for standard UART3"
- help
- Adds support for standard UART 3 when the 8250 serial support
- is enabled.
-
-config ARCH_LPC32XX_UART4_SELECT
- bool "Add support for standard UART4"
- help
- Adds support for standard UART 4 when the 8250 serial support
- is enabled.
-
-config ARCH_LPC32XX_UART5_SELECT
- bool "Add support for standard UART5"
- default y
- help
- Adds support for standard UART 5 when the 8250 serial support
- is enabled.
-
-config ARCH_LPC32XX_UART6_SELECT
- bool "Add support for standard UART6"
- help
- Adds support for standard UART 6 when the 8250 serial support
- is enabled.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index f2735281616a..b5a3f3423f63 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -31,59 +31,6 @@
#define LPC32XX_SUART_FIFO_SIZE 64
-/* Standard 8250/16550 compatible serial ports */
-static struct plat_serial8250_port serial_std_platform_data[] = {
-#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
- {
- .membase = io_p2v(LPC32XX_UART5_BASE),
- .mapbase = LPC32XX_UART5_BASE,
- .irq = IRQ_LPC32XX_UART_IIR5,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
- {
- .membase = io_p2v(LPC32XX_UART3_BASE),
- .mapbase = LPC32XX_UART3_BASE,
- .irq = IRQ_LPC32XX_UART_IIR3,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
- {
- .membase = io_p2v(LPC32XX_UART4_BASE),
- .mapbase = LPC32XX_UART4_BASE,
- .irq = IRQ_LPC32XX_UART_IIR4,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
- {
- .membase = io_p2v(LPC32XX_UART6_BASE),
- .mapbase = LPC32XX_UART6_BASE,
- .irq = IRQ_LPC32XX_UART_IIR6,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
- { },
-};
-
struct uartinit {
char *uart_ck_name;
u32 ck_mode_mask;
@@ -92,7 +39,6 @@ struct uartinit {
};
static struct uartinit uartinit_data[] __initdata = {
-#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
{
.uart_ck_name = "uart5_ck",
.ck_mode_mask =
@@ -100,8 +46,6 @@ static struct uartinit uartinit_data[] __initdata = {
.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
.mapbase = LPC32XX_UART5_BASE,
},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
{
.uart_ck_name = "uart3_ck",
.ck_mode_mask =
@@ -109,8 +53,6 @@ static struct uartinit uartinit_data[] __initdata = {
.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
.mapbase = LPC32XX_UART3_BASE,
},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
{
.uart_ck_name = "uart4_ck",
.ck_mode_mask =
@@ -118,8 +60,6 @@ static struct uartinit uartinit_data[] __initdata = {
.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
.mapbase = LPC32XX_UART4_BASE,
},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
{
.uart_ck_name = "uart6_ck",
.ck_mode_mask =
@@ -127,19 +67,6 @@ static struct uartinit uartinit_data[] __initdata = {
.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
.mapbase = LPC32XX_UART6_BASE,
},
-#endif
-};
-
-static struct platform_device serial_std_platform_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = serial_std_platform_data,
- },
-};
-
-static struct platform_device *lpc32xx_serial_devs[] __initdata = {
- &serial_std_platform_device,
};
void __init lpc32xx_serial_init(void)
@@ -156,15 +83,8 @@ void __init lpc32xx_serial_init(void)
clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
if (!IS_ERR(clk)) {
clk_enable(clk);
- serial_std_platform_data[i].uartclk =
- clk_get_rate(clk);
}
- /* Fall back on main osc rate if clock rate return fails */
- if (serial_std_platform_data[i].uartclk == 0)
- serial_std_platform_data[i].uartclk =
- LPC32XX_MAIN_OSC_FREQ;
-
/* Setup UART clock modes for all UARTs, disable autoclock */
clkmodes |= uartinit_data[i].ck_mode_mask;
@@ -189,7 +109,7 @@ void __init lpc32xx_serial_init(void)
__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
/* Force a flush of the RX FIFOs to work around a HW bug */
- puart = serial_std_platform_data[i].mapbase;
+ puart = uartinit_data[i].mapbase;
__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
j = LPC32XX_SUART_FIFO_SIZE;
@@ -202,7 +122,4 @@ void __init lpc32xx_serial_init(void)
tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
-
- platform_add_devices(lpc32xx_serial_devs,
- ARRAY_SIZE(lpc32xx_serial_devs));
}