Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2019-08-22

This series contains updates to i40e driver only.

Arnd Bergmann reduces the stack usage which was causing warnings on
32-bit architectures due to large structure sizes for 2 functions
getting inlined, so use noinline_for_stack to prevent the compilers from
combining the 2 functions.

Mauro S. M. Rodrigues fixes an issue when reading an EEPROM from SFP
modules that comply with SFF-8472 but do not implement the Digital
Diagnostic Monitoring (DDM) interface for i40e.

Huhai found we were not checking the return value for configuring the
transmit ring and continuing with XDP configuration of the transmit
ring.

Beilei fixes an issue of shifting signed 32-bit integers.

Sylwia adds support for "packet drop mode" to the MAC configuration for
admin queue command.  This bit controls the behavior when a no-drop
packet is blocking a TC queue.  Adds support for persistent LLDP by
checking the LLDP flag and reading the LLDP from the NVM when enabled.

Adrian fixes the "recovery mode" check to take into account which device
we are on, since x710 devices have 4 register values to check for status
and x722 devices only have 2 register values to check.

Piotr Azarewicz bumps the supported firmware API version to 1.9 which
extends the PHY access admin queue command support.

Jake makes sure the traffic class stats for a VEB are reset when the VEB
stats are reset.

Slawomir fixes a NULL pointer dereference where the VSI pointer was not
updated before passing it to the i40e_set_vf_mac() when the VF is in a
reset state, so wait for the reset to complete.

Grzegorz removes the i40e_update_dcb_config() which was not using the
correct NVM reads, so call i40e_init_dcb() in its place to correctly
update the DCB configuration.

Piotr Kwapulinski expands the scope of i40e_set_mac_type() since this is
needed during probe to determine if we are in recovery mode.  Fixed the
driver reset path when in recovery mode.

Marcin fixed an issue where we were breaking out of a loop too early
when trying to get the PHY capabilities.

v2: Combined patch 7 & 9 in the original series, since both patches
    bumped firmware API version.  Also combined patches 12 & 13 in the
    original series, since one increased the scope of checking for MAC
    and the follow-on patch made use of function within the new scope.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

0 files changed, 0 insertions, 0 deletions