Merge tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm,
     qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new
     props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen,
     Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq,
     fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx
     zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers

   - Convert various Arm Ltd peripheral IP bindings to schemas

   - New bindings for Menlo board CPLD, DH electronics board CPLD,
     Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751
     GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and
     Microchip/SMSC LAN95xx USB Ethernet controllers

   - Add vendor prefix for Enclustra

   - Add various compatible string additions

   - Various example fixes and cleanups

   - Remove unused hisilicon,hi6220-reset binding

   - Treewide fix properties missing type definition

   - Drop some empty and unreferenced .txt bindings

   - Documentation improvements for writing schemas

  DT driver core:

   - Drop static IRQ resources for DT platform devices as IRQ setup is
     dynamic and drivers have all been converted to use
     platform_get_irq() and friends

   - Rework memory allocations and frees for overlays

   - Continue overlay notifier callbacks on successful calls and add
     unittests

   - Handle 'interrupts-extended' in early DT IRQ setup

   - Fix of_property_read_string() errors to match documentation

   - Ignore disabled nodes in FDT API calls"

* tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits)
  of/irq: fix typo in comment
  dt-bindings: Fix properties without any type
  Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example"
  dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings
  dt-bindings: timer: samsung,exynos4210-mct: define strict clock order
  dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems
  dt-bindings: timer: cdns,ttc: drop unneeded minItems
  dt-bindings: mailbox: zynqmp_ipi: convert to yaml
  dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
  dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
  dt-bindings: net: add schema for ASIX USB Ethernet controllers
  of/fdt: Ignore disabled memory nodes
  dt-bindings: arm: fix typos in compatible
  dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360
  dt-bindings: display: convert Arm Komeda to DT schema
  dt-bindings: display: convert Arm Mali-DP to DT schema
  dt-bindings: display: convert Arm HDLCD to DT schema
  dt-bindings: display: convert PL110/PL111 to DT schema
  dt-bindings: arm: convert vexpress-config to DT schema
  dt-bindings: arm: convert vexpress-sysregs to DT schema
  ...

1 files changed, 0 insertions, 78 deletions

diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt
deleted file mode 100644
index 8513695ee47f..000000000000
--- a/Documentation/devicetree/bindings/display/arm,komeda.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device Tree bindings for Arm Komeda display driver
-
-Required properties:
-- compatible: Should be "arm,mali-d71"
-- reg: Physical base address and length of the registers in the system
-- interrupts: the interrupt line number of the device in the system
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: A list of clock names. It should contain:
-      - "aclk": for the main processor clock
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-- iommus: configure the stream id to IOMMU, Must be configured if want to
-    enable iommu in display. for how to configure this node please reference
-        devicetree/bindings/iommu/arm,smmu-v3.txt,
-        devicetree/bindings/iommu/iommu.txt
-
-Required properties for sub-node: pipeline@nq
-Each device contains one or two pipeline sub-nodes (at least one), each
-pipeline node should provide properties:
-- reg: Zero-indexed identifier for the pipeline
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: should contain:
-      - "pxclk": pixel clock
-
-- port: each pipeline connect to an encoder input port. The connection is
-    modeled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-
-Example:
-/ {
-	...
-
-	dp0: display@c00000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "arm,mali-d71";
-		reg = <0xc00000 0x20000>;
-		interrupts = <0 168 4>;
-		clocks = <&dpu_aclk>;
-		clock-names = "aclk";
-		iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
-			<&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
-			<&smmu 8>, <&smmu 9>;
-
-		dp0_pipe0: pipeline@0 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <0>;
-
-			port {
-				dp0_pipe0_out: endpoint {
-					remote-endpoint = <&db_dvi0_in>;
-				};
-			};
-		};
-
-		dp0_pipe1: pipeline@1 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <1>;
-
-			port {
-				dp0_pipe1_out: endpoint {
-					remote-endpoint = <&db_dvi1_in>;
-				};
-			};
-		};
-	};
-	...
-};