dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema

Convert the STM32 low power timers binding to DT schema format using json-schema

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 48 deletions

diff --git a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
deleted file mode 100644
index fb54e4dad5b3..000000000000
--- a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-STMicroelectronics STM32 Low-Power Timer
-
-The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several
-functions:
-- PWM output (with programmable prescaler, configurable polarity)
-- Quadrature encoder, counter
-- Trigger source for STM32 ADC/DAC (LPTIM_OUT)
-
-Required properties:
-- compatible:		Must be "st,stm32-lptimer".
-- reg:			Offset and length of the device's register set.
-- clocks:		Phandle to the clock used by the LP Timer module.
-- clock-names:		Must be "mux".
-- #address-cells:	Should be '<1>'.
-- #size-cells:		Should be '<0>'.
-
-Optional subnodes:
-- pwm:			See ../pwm/pwm-stm32-lp.txt
-- counter:		See ../counter/stm32-lptimer-cnt.txt
-- trigger:		See ../iio/timer/stm32-lptimer-trigger.txt
-
-Example:
-
-	timer@40002400 {
-		compatible = "st,stm32-lptimer";
-		reg = <0x40002400 0x400>;
-		clocks = <&timer_clk>;
-		clock-names = "mux";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pwm {
-			compatible = "st,stm32-pwm-lp";
-			pinctrl-names = "default";
-			pinctrl-0 = <&lppwm1_pins>;
-		};
-
-		trigger@0 {
-			compatible = "st,stm32-lptimer-trigger";
-			reg = <0>;
-		};
-
-		counter {
-			compatible = "st,stm32-lptimer-counter";
-			pinctrl-names = "default";
-			pinctrl-0 = <&lptim1_in_pins>;
-		};
-	};