Merge branch 'exynos/pwm-clocksource' into late/multiplatform

This series from Tomasz Figa restores support for the pwm clocksource
in Exynos, which was broken during the conversion of the platform
to the common clk framework. The clocksource is only used in one
board in the mainline kernel (universal_c210), and this makes it
work for DT based probing as well as restoring the non-DT based
case.

* exynos/pwm-clocksource:
  ARM: dts: exynops4210: really add universal_c210 dts
  ARM: dts: exynos4210: Add basic dts file for universal_c210 board
  ARM: dts: exynos4: Add node for PWM device
  ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos
  clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core
  clocksource: samsung_pwm_timer: Correct programming of clock events
  clocksource: samsung_pwm_timer: Use proper clockevents max_delta
  clocksource: samsung_pwm_timer: Add support for non-DT platforms
  clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct
  clocksource: samsung_pwm_timer: Keep all driver data in a structure
  clocksource: samsung_pwm_timer: Make PWM spinlock global
  clocksource: samsung_pwm_timer: Let platforms select the driver
  Documentation: Add device tree bindings for Samsung PWM timers
  clocksource: add samsung pwm timer driver

Conflicts:
	arch/arm/boot/dts/Makefile
	arch/arm/mach-exynos/common.c
	drivers/clocksource/Kconfig
	drivers/clocksource/Makefile

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 43 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
new file mode 100644
index 000000000000..ac67c687a327
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt
@@ -0,0 +1,43 @@
+* Samsung PWM timers
+
+Samsung SoCs contain PWM timer blocks which can be used for system clock source
+and clock event timers, as well as to drive SoC outputs with PWM signal. Each
+PWM timer block provides 5 PWM channels (not all of them can drive physical
+outputs - see SoC and board manual).
+
+Be aware that the clocksource driver supports only uniprocessor systems.
+
+Required properties:
+- compatible : should be one of following:
+    samsung,s3c2410-pwm - for 16-bit timers present on S3C24xx SoCs
+    samsung,s3c6400-pwm - for 32-bit timers present on S3C64xx SoCs
+    samsung,s5p6440-pwm - for 32-bit timers present on S5P64x0 SoCs
+    samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210,
+			  Exynos4210 rev0 SoCs
+    samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210,
+                          Exynos4x12 and Exynos5250 SoCs
+- reg: base address and size of register area
+- interrupts: list of timer interrupts (one interrupt per timer, starting at
+  timer 0)
+- #pwm-cells: number of cells used for PWM specifier - must be 3
+   the specifier format is as follows:
+     - phandle to PWM controller node
+     - index of PWM channel (from 0 to 4)
+     - PWM signal period in nanoseconds
+     - bitmask of optional PWM flags:
+        0x1 - invert PWM signal
+
+Optional properties:
+- samsung,pwm-outputs: list of PWM channels used as PWM outputs on particular
+    platform - an array of up to 5 elements being indices of PWM channels
+    (from 0 to 4), the order does not matter.
+
+Example:
+	pwm@7f006000 {
+		compatible = "samsung,s3c6400-pwm";
+		reg = <0x7f006000 0x1000>;
+		interrupt-parent = <&vic0>;
+		interrupts = <23>, <24>, <25>, <27>, <28>;
+		samsung,pwm-outputs = <0>, <1>;
+		#pwm-cells = <3>;
+	}