Merge v5.3-rc1 into drm-misc-next

Noralf needs some SPI patches in 5.3 to merge some work on tinydrm.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

14 files changed, 778 insertions, 36 deletions

diff --git a/Documentation/media/uapi/cec/cec-api.rst b/Documentation/media/uapi/cec/cec-api.rst
index b614bf81aa20..0780ba07995a 100644
--- a/Documentation/media/uapi/cec/cec-api.rst
+++ b/Documentation/media/uapi/cec/cec-api.rst
@@ -39,7 +39,7 @@ Revision and Copyright
 **********************
 Authors:
 
-- Verkuil, Hans <hans.verkuil@cisco.com>
+- Verkuil, Hans <hverkuil-cisco@xs4all.nl>
 
  - Initial version.
 
diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
index c53bb5f73f0d..d0902f356d65 100644
--- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
@@ -294,7 +294,8 @@ EINVAL
     The requested mode is invalid.
 
 EPERM
-    Monitor mode is requested without having root permissions
+    Monitor mode is requested, but the process does have the ``CAP_NET_ADMIN``
+    capability.
 
 EBUSY
     Someone else is already an exclusive follower or initiator.
diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst
index c3a685ff05cb..4137903d672e 100644
--- a/Documentation/media/uapi/cec/cec-ioc-receive.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst
@@ -223,6 +223,18 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
 	result of the :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`, and once via
 	:ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
 
+    * .. _`CEC-MSG-FL-RAW`:
+
+      - ``CEC_MSG_FL_RAW``
+      - 2
+      - Normally CEC messages are validated before transmitting them. If this
+        flag is set when :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` is called,
+	then no validation takes place and the message is transmitted as-is.
+	This is useful when debugging CEC issues.
+	This flag is only allowed if the process has the ``CAP_SYS_RAWIO``
+	capability. If that is not set, then the ``EPERM`` error code is
+	returned.
+
 
 .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
 
@@ -358,7 +370,8 @@ ENOTTY
 
 EPERM
     The CEC adapter is not configured, i.e. :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
-    has never been called.
+    has never been called, or ``CEC_MSG_FL_RAW`` was used from a process that
+    did not have the ``CAP_SYS_RAWIO`` capability.
 
 ENONET
     The CEC adapter is not configured, i.e. :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst
index a982f16e55a4..b827ebc398f8 100644
--- a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst
+++ b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst
@@ -84,6 +84,11 @@ returned during the enumeration process.
        -  Pointer to a links array allocated by the application. Ignored if
 	  NULL.
 
+    *  -  __u32
+       -  ``reserved[4]``
+       -  Reserved for future extensions. Drivers and applications must set
+          the array to zero.
+
 
 .. c:type:: media_pad_desc
 
@@ -135,7 +140,7 @@ returned during the enumeration process.
        -  Link flags, see :ref:`media-link-flag` for more details.
 
     *  -  __u32
-       -  ``reserved[4]``
+       -  ``reserved[2]``
        -  Reserved for future extensions. Drivers and applications must set
           the array to zero.
 
diff --git a/Documentation/media/uapi/rc/rc-tables.rst b/Documentation/media/uapi/rc/rc-tables.rst
index 177ac44fa0fa..20d7c686922b 100644
--- a/Documentation/media/uapi/rc/rc-tables.rst
+++ b/Documentation/media/uapi/rc/rc-tables.rst
@@ -54,7 +54,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 3
 
-       -  ``KEY_0``
+       -  ``KEY_NUMERIC_0``
 
        -  Keyboard digit 0
 
@@ -62,7 +62,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 4
 
-       -  ``KEY_1``
+       -  ``KEY_NUMERIC_1``
 
        -  Keyboard digit 1
 
@@ -70,7 +70,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 5
 
-       -  ``KEY_2``
+       -  ``KEY_NUMERIC_2``
 
        -  Keyboard digit 2
 
@@ -78,7 +78,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 6
 
-       -  ``KEY_3``
+       -  ``KEY_NUMERIC_3``
 
        -  Keyboard digit 3
 
@@ -86,7 +86,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 7
 
-       -  ``KEY_4``
+       -  ``KEY_NUMERIC_4``
 
        -  Keyboard digit 4
 
@@ -94,7 +94,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 8
 
-       -  ``KEY_5``
+       -  ``KEY_NUMERIC_5``
 
        -  Keyboard digit 5
 
@@ -102,7 +102,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 9
 
-       -  ``KEY_6``
+       -  ``KEY_NUMERIC_6``
 
        -  Keyboard digit 6
 
@@ -110,7 +110,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 10
 
-       -  ``KEY_7``
+       -  ``KEY_NUMERIC_7``
 
        -  Keyboard digit 7
 
@@ -118,7 +118,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 11
 
-       -  ``KEY_8``
+       -  ``KEY_NUMERIC_8``
 
        -  Keyboard digit 8
 
@@ -126,7 +126,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 12
 
-       -  ``KEY_9``
+       -  ``KEY_NUMERIC_9``
 
        -  Keyboard digit 9
 
@@ -196,7 +196,7 @@ the remote via /dev/input/event devices.
 
        -  ``KEY_PAUSE``
 
-       -  Pause sroweam
+       -  Pause stream
 
        -  PAUSE / FREEZE
 
@@ -220,7 +220,7 @@ the remote via /dev/input/event devices.
 
        -  ``KEY_STOP``
 
-       -  Stop sroweam
+       -  Stop stream
 
        -  STOP
 
@@ -228,7 +228,7 @@ the remote via /dev/input/event devices.
 
        -  ``KEY_RECORD``
 
-       -  Start/stop recording sroweam
+       -  Start/stop recording stream
 
        -  CAPTURE / REC / RECORD/PAUSE
 
@@ -577,7 +577,7 @@ the remote via /dev/input/event devices.
 
        -  ``KEY_CLEAR``
 
-       -  Stop sroweam and return to default input video/audio
+       -  Stop stream and return to default input video/audio
 
        -  CLEAR / RESET / BOSS KEY
 
@@ -593,7 +593,7 @@ the remote via /dev/input/event devices.
 
        -  ``KEY_FAVORITES``
 
-       -  Open the favorites sroweam window
+       -  Open the favorites stream window
 
        -  TV WALL / Favorites
 
diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst
index ec33768c055e..8f4eb8823d82 100644
--- a/Documentation/media/uapi/v4l/biblio.rst
+++ b/Documentation/media/uapi/v4l/biblio.rst
@@ -122,6 +122,15 @@ ITU BT.1119
 
 :author:    International Telecommunication Union (http://www.itu.ch)
 
+.. _h264:
+
+ITU-T Rec. H.264 Specification (04/2017 Edition)
+================================================
+
+:title:     ITU-T Recommendation H.264 "Advanced Video Coding for Generic Audiovisual Services"
+
+:author:    International Telecommunication Union (http://www.itu.ch)
+
 .. _jfif:
 
 JFIF
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
index 4a8446203085..d6ea2ffd65c5 100644
--- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
+++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
@@ -759,6 +759,32 @@ enum v4l2_mpeg_video_h264_level -
 
 
 
+.. _v4l2-mpeg-video-mpeg2-level:
+
+``V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL``
+    (enum)
+
+enum v4l2_mpeg_video_mpeg2_level -
+    The level information for the MPEG2 elementary stream. Applicable to
+    MPEG2 codecs. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_LOW``
+      - Low Level (LL)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_MAIN``
+      - Main Level (ML)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH_1440``
+      - High-1440 Level (H-14)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH``
+      - High Level (HL)
+
+
+
 .. _v4l2-mpeg-video-mpeg4-level:
 
 ``V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL``
@@ -845,6 +871,36 @@ enum v4l2_mpeg_video_h264_profile -
 
 
 
+.. _v4l2-mpeg-video-mpeg2-profile:
+
+``V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_mpeg2_profile -
+    The profile information for MPEG2. Applicable to MPEG2 codecs.
+    Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SIMPLE``
+      - Simple profile (SP)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_MAIN``
+      - Main profile (MP)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SNR_SCALABLE``
+      - SNR Scalable profile (SNR)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SPATIALLY_SCALABLE``
+      - Spatially Scalable profile (Spt)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_HIGH``
+      - High profile (HP)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_MULTIVIEW``
+      - Multi-view profile (MVP)
+
+
+
 .. _v4l2-mpeg-video-mpeg4-profile:
 
 ``V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE``
@@ -1395,6 +1451,575 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
       - Layer number
 
 
+.. _v4l2-mpeg-h264:
+
+``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)``
+    Specifies the sequence parameter set (as extracted from the
+    bitstream) for the associated H264 slice data. This includes the
+    necessary parameters for configuring a stateless hardware decoding
+    pipeline for H264. The bitstream parameters are defined according
+    to :ref:`h264`, section 7.4.2.1.1 "Sequence Parameter Set Data
+    Semantics". For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_sps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_sps
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``profile_idc``
+      -
+    * - __u8
+      - ``constraint_set_flags``
+      - See :ref:`Sequence Parameter Set Constraints Set Flags <h264_sps_constraints_set_flags>`
+    * - __u8
+      - ``level_idc``
+      -
+    * - __u8
+      - ``seq_parameter_set_id``
+      -
+    * - __u8
+      - ``chroma_format_idc``
+      -
+    * - __u8
+      - ``bit_depth_luma_minus8``
+      -
+    * - __u8
+      - ``bit_depth_chroma_minus8``
+      -
+    * - __u8
+      - ``log2_max_frame_num_minus4``
+      -
+    * - __u8
+      - ``pic_order_cnt_type``
+      -
+    * - __u8
+      - ``log2_max_pic_order_cnt_lsb_minus4``
+      -
+    * - __u8
+      - ``max_num_ref_frames``
+      -
+    * - __u8
+      - ``num_ref_frames_in_pic_order_cnt_cycle``
+      -
+    * - __s32
+      - ``offset_for_ref_frame[255]``
+      -
+    * - __s32
+      - ``offset_for_non_ref_pic``
+      -
+    * - __s32
+      - ``offset_for_top_to_bottom_field``
+      -
+    * - __u16
+      - ``pic_width_in_mbs_minus1``
+      -
+    * - __u16
+      - ``pic_height_in_map_units_minus1``
+      -
+    * - __u32
+      - ``flags``
+      - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>`
+
+.. _h264_sps_constraints_set_flags:
+
+``Sequence Parameter Set Constraints Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET0_FLAG``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET1_FLAG``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET2_FLAG``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET3_FLAG``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET4_FLAG``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET5_FLAG``
+      - 0x00000020
+      -
+
+.. _h264_sps_flags:
+
+``Sequence Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD``
+      - 0x00000020
+      -
+    * - ``V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE``
+      - 0x00000040
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_PPS (struct)``
+    Specifies the picture parameter set (as extracted from the
+    bitstream) for the associated H264 slice data. This includes the
+    necessary parameters for configuring a stateless hardware decoding
+    pipeline for H264.  The bitstream parameters are defined according
+    to :ref:`h264`, section 7.4.2.2 "Picture Parameter Set RBSP
+    Semantics". For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_pps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_pps
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``pic_parameter_set_id``
+      -
+    * - __u8
+      - ``seq_parameter_set_id``
+      -
+    * - __u8
+      - ``num_slice_groups_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l0_default_active_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l1_default_active_minus1``
+      -
+    * - __u8
+      - ``weighted_bipred_idc``
+      -
+    * - __s8
+      - ``pic_init_qp_minus26``
+      -
+    * - __s8
+      - ``pic_init_qs_minus26``
+      -
+    * - __s8
+      - ``chroma_qp_index_offset``
+      -
+    * - __s8
+      - ``second_chroma_qp_index_offset``
+      -
+    * - __u16
+      - ``flags``
+      - See :ref:`Picture Parameter Set Flags <h264_pps_flags>`
+
+.. _h264_pps_flags:
+
+``Picture Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT``
+      - 0x00000020
+      -
+    * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE``
+      - 0x00000040
+      -
+    * - ``V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT``
+      - 0x00000080
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)``
+    Specifies the scaling matrix (as extracted from the bitstream) for
+    the associated H264 slice data. The bitstream parameters are
+    defined according to :ref:`h264`, section 7.4.2.1.1.1 "Scaling
+    List Semantics". For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_scaling_matrix
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``scaling_list_4x4[6][16]``
+      -
+    * - __u8
+      - ``scaling_list_8x8[6][64]``
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)``
+    Specifies the slice parameters (as extracted from the bitstream)
+    for the associated H264 slice data. This includes the necessary
+    parameters for configuring a stateless hardware decoding pipeline
+    for H264.  The bitstream parameters are defined according to
+    :ref:`h264`, section 7.4.3 "Slice Header Semantics". For further
+    documentation, refer to the above specification, unless there is
+    an explicit comment stating otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API
+       and it is expected to change.
+
+       This structure is expected to be passed as an array, with one
+       entry for each slice included in the bitstream buffer.
+
+.. c:type:: v4l2_ctrl_h264_slice_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_slice_params
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``size``
+      -
+    * - __u32
+      - ``header_bit_size``
+      -
+    * - __u16
+      - ``first_mb_in_slice``
+      -
+    * - __u8
+      - ``slice_type``
+      -
+    * - __u8
+      - ``pic_parameter_set_id``
+      -
+    * - __u8
+      - ``colour_plane_id``
+      -
+    * - __u8
+      - ``redundant_pic_cnt``
+      -
+    * - __u16
+      - ``frame_num``
+      -
+    * - __u16
+      - ``idr_pic_id``
+      -
+    * - __u16
+      - ``pic_order_cnt_lsb``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt_bottom``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt0``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt1``
+      -
+    * - struct :c:type:`v4l2_h264_pred_weight_table`
+      - ``pred_weight_table``
+      -
+    * - __u32
+      - ``dec_ref_pic_marking_bit_size``
+      -
+    * - __u32
+      - ``pic_order_cnt_bit_size``
+      -
+    * - __u8
+      - ``cabac_init_idc``
+      -
+    * - __s8
+      - ``slice_qp_delta``
+      -
+    * - __s8
+      - ``slice_qs_delta``
+      -
+    * - __u8
+      - ``disable_deblocking_filter_idc``
+      -
+    * - __s8
+      - ``slice_alpha_c0_offset_div2``
+      -
+    * - __s8
+      - ``slice_beta_offset_div2``
+      -
+    * - __u8
+      - ``num_ref_idx_l0_active_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l1_active_minus1``
+      -
+    * - __u32
+      - ``slice_group_change_cycle``
+      -
+    * - __u8
+      - ``ref_pic_list0[32]``
+      - Reference picture list after applying the per-slice modifications
+    * - __u8
+      - ``ref_pic_list1[32]``
+      - Reference picture list after applying the per-slice modifications
+    * - __u32
+      - ``flags``
+      - See :ref:`Slice Parameter Flags <h264_slice_flags>`
+
+.. _h264_slice_flags:
+
+``Slice Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SLICE_FLAG_FIELD_PIC``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SLICE_FLAG_BOTTOM_FIELD``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH``
+      - 0x00000008
+      -
+
+``Prediction Weight Table``
+
+    The bitstream parameters are defined according to :ref:`h264`,
+    section 7.4.3.2 "Prediction Weight Table Semantics". For further
+    documentation, refer to the above specification, unless there is
+    an explicit comment stating otherwise.
+
+.. c:type:: v4l2_h264_pred_weight_table
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_pred_weight_table
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u16
+      - ``luma_log2_weight_denom``
+      -
+    * - __u16
+      - ``chroma_log2_weight_denom``
+      -
+    * - struct :c:type:`v4l2_h264_weight_factors`
+      - ``weight_factors[2]``
+      - The weight factors at index 0 are the weight factors for the reference
+        list 0, the one at index 1 for the reference list 1.
+
+.. c:type:: v4l2_h264_weight_factors
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_weight_factors
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __s16
+      - ``luma_weight[32]``
+      -
+    * - __s16
+      - ``luma_offset[32]``
+      -
+    * - __s16
+      - ``chroma_weight[32][2]``
+      -
+    * - __s16
+      - ``chroma_offset[32][2]``
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)``
+    Specifies the decode parameters (as extracted from the bitstream)
+    for the associated H264 slice data. This includes the necessary
+    parameters for configuring a stateless hardware decoding pipeline
+    for H264. The bitstream parameters are defined according to
+    :ref:`h264`. For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_decode_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_decode_params
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - struct :c:type:`v4l2_h264_dpb_entry`
+      - ``dpb[16]``
+      -
+    * - __u16
+      - ``num_slices``
+      - Number of slices needed to decode the current frame
+    * - __u16
+      - ``nal_ref_idc``
+      - NAL reference ID value coming from the NAL Unit header
+    * - __u8
+      - ``ref_pic_list_p0[32]``
+      - Backward reference list used by P-frames in the original bitstream order
+    * - __u8
+      - ``ref_pic_list_b0[32]``
+      - Backward reference list used by B-frames in the original bitstream order
+    * - __u8
+      - ``ref_pic_list_b1[32]``
+      - Forward reference list used by B-frames in the original bitstream order
+    * - __s32
+      - ``top_field_order_cnt``
+      - Picture Order Count for the coded top field
+    * - __s32
+      - ``bottom_field_order_cnt``
+      - Picture Order Count for the coded bottom field
+    * - __u32
+      - ``flags``
+      - See :ref:`Decode Parameters Flags <h264_decode_params_flags>`
+
+.. _h264_decode_params_flags:
+
+``Decode Parameters Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC``
+      - 0x00000001
+      - That picture is an IDR picture
+
+.. c:type:: v4l2_h264_dpb_entry
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_dpb_entry
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u64
+      - ``reference_ts``
+      - Timestamp of the V4L2 capture buffer to use as reference, used
+        with B-coded and P-coded frames. The timestamp refers to the
+	``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+	:c:func:`v4l2_timeval_to_ns()` function to convert the struct
+	:c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+    * - __u16
+      - ``frame_num``
+      -
+    * - __u16
+      - ``pic_num``
+      -
+    * - __s32
+      - ``top_field_order_cnt``
+      -
+    * - __s32
+      - ``bottom_field_order_cnt``
+      -
+    * - __u32
+      - ``flags``
+      - See :ref:`DPB Entry Flags <h264_dpb_flags>`
+
+.. _h264_dpb_flags:
+
+``DPB Entries Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID``
+      - 0x00000001
+      - The DPB entry is valid and should be considered
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE``
+      - 0x00000002
+      - The DPB entry is currently being used as a reference frame
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM``
+      - 0x00000004
+      - The DPB entry is a long term reference frame
 
 .. _v4l2-mpeg-mpeg2:
 
diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
index 24274b398e63..655362483730 100644
--- a/Documentation/media/uapi/v4l/extended-controls.rst
+++ b/Documentation/media/uapi/v4l/extended-controls.rst
@@ -85,20 +85,17 @@ be able to see such compound controls. In other words, these controls
 with compound types should only be used programmatically.
 
 Since such compound controls need to expose more information about
-themselves than is possible with
-:ref:`VIDIOC_QUERYCTRL` the
-:ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>` ioctl was added. In
-particular, this ioctl gives the dimensions of the N-dimensional array
-if this control consists of more than one element.
+themselves than is possible with :ref:`VIDIOC_QUERYCTRL <VIDIOC_QUERYCTRL>`
+the :ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>` ioctl was added. In
+particular, this ioctl gives the dimensions of the N-dimensional array if
+this control consists of more than one element.
 
 .. note::
 
    #. It is important to realize that due to the flexibility of controls it is
       necessary to check whether the control you want to set actually is
       supported in the driver and what the valid range of values is. So use
-      the :ref:`VIDIOC_QUERYCTRL` (or :ref:`VIDIOC_QUERY_EXT_CTRL
-      <VIDIOC_QUERYCTRL>`) and :ref:`VIDIOC_QUERYMENU <VIDIOC_QUERYCTRL>`
-      ioctls to check this.
+      :ref:`VIDIOC_QUERYCTRL` to check this.
 
    #. It is possible that some of the menu indices in a control of
       type ``V4L2_CTRL_TYPE_MENU`` may not be supported (``VIDIOC_QUERYMENU``
@@ -144,7 +141,7 @@ control class is found:
     while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &qctrl)) {
 	if (V4L2_CTRL_ID2CLASS(qctrl.id) != V4L2_CTRL_CLASS_MPEG)
 	    break;
-	    /* ... */
+	/* ... */
 	qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
     }
 
diff --git a/Documentation/media/uapi/v4l/field-order.rst b/Documentation/media/uapi/v4l/field-order.rst
index d640e922a974..c422bebe4314 100644
--- a/Documentation/media/uapi/v4l/field-order.rst
+++ b/Documentation/media/uapi/v4l/field-order.rst
@@ -51,6 +51,11 @@ determined by the video standard. Hence the distinction between temporal
 and spatial order of fields. The diagrams below should make this
 clearer.
 
+In V4L it is assumed that all video cameras transmit fields on the media
+bus in the same order they were captured, so if the top field was
+captured first (is the older field), the top field is also transmitted
+first on the bus.
+
 All video capture and output devices must report the current field
 order. Some drivers may permit the selection of a different order, to
 this end applications initialize the ``field`` field of struct
@@ -101,10 +106,10 @@ enum v4l2_field
     * - ``V4L2_FIELD_INTERLACED``
       - 4
       - Images contain both fields, interleaved line by line. The temporal
-	order of the fields (whether the top or bottom field is first
-	transmitted) depends on the current video standard. M/NTSC
-	transmits the bottom field first, all other standards the top
-	field first.
+	order of the fields (whether the top or bottom field is older)
+	depends on the current video standard. In M/NTSC the bottom
+	field is the older field. In all other standards the top field
+	is the older field.
     * - ``V4L2_FIELD_SEQ_TB``
       - 5
       - Images contain both fields, the top field lines are stored first
@@ -135,11 +140,11 @@ enum v4l2_field
     * - ``V4L2_FIELD_INTERLACED_TB``
       - 8
       - Images contain both fields, interleaved line by line, top field
-	first. The top field is transmitted first.
+	first. The top field is the older field.
     * - ``V4L2_FIELD_INTERLACED_BT``
       - 9
       - Images contain both fields, interleaved line by line, top field
-	first. The bottom field is transmitted first.
+	first. The bottom field is the older field.
 
 
 
diff --git a/Documentation/media/uapi/v4l/pixfmt-compressed.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
index 6c961cfb74da..4b701fc7653e 100644
--- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
@@ -52,6 +52,31 @@ Compressed Formats
       - ``V4L2_PIX_FMT_H264_MVC``
       - 'M264'
       - H264 MVC video elementary stream.
+    * .. _V4L2-PIX-FMT-H264-SLICE-RAW:
+
+      - ``V4L2_PIX_FMT_H264_SLICE_RAW``
+      - 'S264'
+      - H264 parsed slice data, without the start code and as
+	extracted from the H264 bitstream.  This format is adapted for
+	stateless video decoders that implement an H264 pipeline
+	(using the :ref:`mem2mem` and :ref:`media-request-api`).
+	Metadata associated with the frame to decode are required to
+	be passed through the ``V4L2_CID_MPEG_VIDEO_H264_SPS``,
+	``V4L2_CID_MPEG_VIDEO_H264_PPS``,
+	``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX``,
+	``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS`` and
+	``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS`` controls.  See the
+	:ref:`associated Codec Control IDs <v4l2-mpeg-h264>`.  Exactly
+	one output and one capture buffer must be provided for use
+	with this pixel format. The output buffer must contain the
+	appropriate number of macroblocks to decode a full
+	corresponding frame to the matching capture buffer.
+
+	.. note::
+
+	   This format is not yet part of the public kernel API and it
+	   is expected to change.
+
     * .. _V4L2-PIX-FMT-H263:
 
       - ``V4L2_PIX_FMT_H263``
diff --git a/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst
index 5688c816e334..db43dda5aafb 100644
--- a/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst
@@ -31,7 +31,20 @@ describing all planes of that format.
 
     * - __u32
       - ``sizeimage``
-      - Maximum size in bytes required for image data in this plane.
+      - Maximum size in bytes required for image data in this plane,
+	set by the driver. When the image consists of variable length
+	compressed data this is the number of bytes required by the
+	codec to support the worst-case compression scenario.
+
+	The driver will set the value for uncompressed images.
+
+	Clients are allowed to set the sizeimage field for variable length
+	compressed data flagged with ``V4L2_FMT_FLAG_COMPRESSED`` at
+	:ref:`VIDIOC_ENUM_FMT`, but the driver may ignore it and set the
+	value itself, or it may modify the provided value based on
+	alignment requirements or minimum/maximum size requirements.
+	If the client wants to leave this to the driver, then it should
+	set sizeimage to 0.
     * - __u32
       - ``bytesperline``
       - Distance in bytes between the leftmost pixels in two adjacent
diff --git a/Documentation/media/uapi/v4l/pixfmt-v4l2.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2.rst
index 71eebfc6d853..da6da2ef139a 100644
--- a/Documentation/media/uapi/v4l/pixfmt-v4l2.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-v4l2.rst
@@ -89,7 +89,18 @@ Single-planar format structure
       - Size in bytes of the buffer to hold a complete image, set by the
 	driver. Usually this is ``bytesperline`` times ``height``. When
 	the image consists of variable length compressed data this is the
-	maximum number of bytes required to hold an image.
+	number of bytes required by the codec to support the worst-case
+	compression scenario.
+
+	The driver will set the value for uncompressed images.
+
+	Clients are allowed to set the sizeimage field for variable length
+	compressed data flagged with ``V4L2_FMT_FLAG_COMPRESSED`` at
+	:ref:`VIDIOC_ENUM_FMT`, but the driver may ignore it and set the
+	value itself, or it may modify the provided value based on
+	alignment requirements or minimum/maximum size requirements.
+	If the client wants to leave this to the driver, then it should
+	set sizeimage to 0.
     * - __u32
       - ``colorspace``
       - Image colorspace, from enum :c:type:`v4l2_colorspace`.
diff --git a/Documentation/media/uapi/v4l/vidioc-qbuf.rst b/Documentation/media/uapi/v4l/vidioc-qbuf.rst
index dbf7b445a27b..407302d80684 100644
--- a/Documentation/media/uapi/v4l/vidioc-qbuf.rst
+++ b/Documentation/media/uapi/v4l/vidioc-qbuf.rst
@@ -139,6 +139,14 @@ may continue as normal, but should be aware that data in the dequeued
 buffer might be corrupted. When using the multi-planar API, the planes
 array must be passed in as well.
 
+If the application sets the ``memory`` field to ``V4L2_MEMORY_DMABUF`` to
+dequeue a :ref:`DMABUF <dmabuf>` buffer, the driver fills the ``m.fd`` field
+with a file descriptor numerically the same as the one given to ``VIDIOC_QBUF``
+when the buffer was enqueued. No new file descriptor is created at dequeue time
+and the value is only for the application convenience. When the multi-planar
+API is used the ``m.fd`` fields of the passed array of struct
+:c:type:`v4l2_plane` are filled instead.
+
 By default ``VIDIOC_DQBUF`` blocks when no buffer is in the outgoing
 queue. When the ``O_NONBLOCK`` flag was given to the
 :ref:`open() <func-open>` function, ``VIDIOC_DQBUF`` returns
diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
index f824162d0ea9..dc500632095d 100644
--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
+++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
@@ -443,6 +443,36 @@ See also the examples in :ref:`control`.
       - n/a
       - A struct :c:type:`v4l2_ctrl_mpeg2_quantization`, containing MPEG-2
 	quantization matrices for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_SPS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_sps`, containing H264
+	sequence parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_PPS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_pps`, containing H264
+	picture parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_SCALING_MATRIX``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_scaling_matrix`, containing H264
+	scaling matrices for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_SLICE_PARAMS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_slice_params`, containing H264
+	slice parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_DECODE_PARAMS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_decode_params`, containing H264
+	decode parameters for stateless video decoders.
 
 .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|